The DOI matches its Crossref record; 93 of the 93 references it cites were found in a registry or an index.
Advances in Metal Additive Manufacturing: A Review of Common Processes, Industrial Applications, and Current Challenges
Open accessAbstract
In recent years, Additive Manufacturing (AM), also called 3D printing, has been expanding into several industrial sectors due to the technology providing opportunities in terms of improved functionality, productivity, and competitiveness. While metal AM technologies have almost unlimited potential, and the range of applications has increased in recent years, industries have faced challenges in the adoption of these technologies and coping with a turbulent market. Despite the extensive work that has been completed on the properties of metal AM materials, there is still a need of a robust understanding of processes, challenges, application-specific needs, and considerations associated with these technologies. Therefore, the goal of this study is to present a comprehensive review of the most common metal AM technologies, an exploration of metal AM advancements, and industrial applications for the different AM technologies across various industry sectors. This study also outlines current limitations and challenges, which prevent industries to fully benefit from the metal AM opportunities, including production volume, standards compliance, post processing, product quality, maintenance, and materials range. Overall, this paper provides a survey as the benchmark for future industrial applications and research and development projects, in order to assist industries in selecting a suitable AM technology for their application.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Ding, D., Pan, Z., Cuiuri, D., & Li, H. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7077-3 · Cited by 1,648
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Kok, Y., Tan, X. P., Wang, P., Nai, M. L. S., Loh, N. H., Liu, E., & Tor, S. B. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.11.021 · Cited by 1,447
King, W. E., Anderson, A. T., Ferencz, R. M., Hodge, N. E., Kamath, C., Khairallah, S. A., & Rubenchik, A. M. (2015) · Applied Physics Reviews · doi:10.1063/1.4937809 · Cited by 1,258
The Role of Additive Manufacturing in the Era of Industry 4.0
Dilberoglu, U. M., Gharehpapagh, B., Yaman, U., & Dolen, M. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.148 · Cited by 1,000
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
Invited review article: Strategies and processes for high quality wire arc additive manufacturing
Cunningham, C. R., Flynn, J. M., Shokrani, A., Dhokia, V., & Newman, S. T. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.020 · Cited by 820
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Prashanth, K. G., Scudino, S., Klauss, H. J., Surreddi, K. B., Löber, L., Wang, Z., Chaubey, A. K., Kühn, U., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.023 · Cited by 803
Review of additive manufacturing technologies and applications in the aerospace industry
Najmon, J. C., Raeisi, S., & Tovar, A. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00002-9 · Cited by 719
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Overview of Materials Qualification Needs for Metal Additive Manufacturing
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016) · JOM · doi:10.1007/s11837-015-1810-0 · Cited by 630
An overview of residual stresses in metal powder bed fusion
Bartlett, J. L., & Li, X. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.02.020 · Cited by 616
Fluid and particle dynamics in laser powder bed fusion
Bidare, P., Bitharas, I., Ward, R. M., Attallah, M. M., & Moore, A. J. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.09.051 · Cited by 555
Wilson, J. M., Piya, C., Shin, Y. C., Zhao, F., & Ramani, K. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.05.084 · Cited by 543
X-ray computed tomography for additive manufacturing: a review
Thompson, A., Maskery, I., & Leach, R. K. (2016) · Measurement Science and Technology · doi:10.1088/0957-0233/27/7/072001 · Cited by 521
Hwang, S., Reyes, E. I., Moon, K.-S., Rumpf, R. C., & Kim, N. S. (2015) · Journal of Electronic Materials · doi:10.1007/s11664-014-3425-6 · Cited by 482
Hybrid additive and subtractive machine tools – Research and industrial developments
Flynn, J. M., Shokrani, A., Newman, S. T., & Dhokia, V. (2016) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2015.11.007 · Cited by 459
Additive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 441
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J. (2017) · JOM · doi:10.1007/s11837-017-2265-2 · Cited by 422
Gu, J., Ding, J., Williams, S. W., Gu, H., Bai, J., Zhai, Y., & Ma, P. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.10.101 · Cited by 413
Oropallo, W., & Piegl, L. A. (2015) · Engineering With Computers · doi:10.1007/s00366-015-0407-0 · Cited by 406
Duda, T., & Raghavan, L. V. (2016) · IFAC-PapersOnLine · doi:10.1016/j.ifacol.2016.11.111 · Cited by 374
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
Delgado, J., Ciurana, J., & Rodríguez, C. A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3643-5 · Cited by 305
Robot assisted additive manufacturing: A review
Urhal, P., Weightman, A., Diver, C., & Bartolo, P. (2019) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2019.05.005 · Cited by 277
Tammas-Williams, S., Withers, P. J., Todd, I., & Prangnell, P. B. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3429-3 · Cited by 269
Ahn, D.-G. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0048-9 · Cited by 268
A Practical Guide to Design for Additive Manufacturing
Diegel, O., Nordin, A., & Motte, D. (2019) · Springer Series in Advanced Manufacturing · doi:10.1007/978-981-13-8281-9 · Cited by 258
Laser polishing of 3D printed mesoscale components
Bhaduri, D., Penchev, P., Batal, A., Dimov, S., Soo, S. L., Sten, S., Harrysson, U., Zhang, Z., & Dong, H. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.211 · Cited by 257
Monzón, M. D., Ortega, Z., Martínez, A., & Ortega, F. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6334-1 · Cited by 251
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Chew, Y., Bi, G. J., Zhu, Z. G., Ng, F. L., Weng, F., Liu, S. B., Nai, S. M. L., & Lee, B. Y. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.12.005 · Cited by 249
Research needs and recommendations on environmental implications of additive manufacturing
Rejeski, D., Zhao, F., & Huang, Y. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.019 · Cited by 233
Arc Welding Processes for Additive Manufacturing: A Review
Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018) · Transactions on Intelligent Welding Manufacturing · doi:10.1007/978-981-10-5355-9_1 · Cited by 205
Additive Manufacturing for the Aircraft Industry: A Review
Singamneni, S., LV, Y., Hewitt, A., Chalk, R., Thomas, W., & Jordison, D. (2019) · Journal of Aeronautics & Aerospace Engineering · doi:10.35248/2168-9792.19.8.215 · Cited by 198
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Overhanging Features and the SLM/DMLS Residual Stresses Problem: Review and Future Research Need
Patterson, A. E., Messimer, S. L., & Farrington, P. A. (2017) · Technologies · doi:10.3390/technologies5020015 · Cited by 192
A Review of Metal Additive Manufacturing Technologies
Yakout, M., Elbestawi, M. A., & Veldhuis, S. C. (2018) · Solid State Phenomena · doi:10.4028/www.scientific.net/ssp.278.1 · Cited by 189
Additive manufacturing for aerospace flight applications
Shapiro, A. A., Borgonia, J. P., Chen, Q. N., Dillon, R. P., McEnerney, B., Polit-Casillas, R., & Soloway, L. (2016) · Journal of Spacecraft and Rockets · doi:10.2514/1.a33544 · Cited by 178
Ceramic–metal composites for heat exchangers in concentrated solar power plants
Caccia, M., Tabandeh-Khorshid, M., Itskos, G., Strayer, A. R., Caldwell, A. S., Pidaparti, S., Singnisai, S., Rohskopf, A. D., Schroeder, A. M., Jarrahbashi, D., et al. (2018) · Nature · doi:10.1038/s41586-018-0593-1 · Cited by 176
Opportunities and challenges of quality engineering for additive manufacturing
Colosimo, B. M., Huang, Q., Dasgupta, T., & Tsung, F. (2018) · Journal of Quality Technology · doi:10.1080/00224065.2018.1487726 · Cited by 165
Additive Manufacturing: Status and Opportunities
Scott, J. A., Weber, C. L., Newsome, S., & Wohlers, T. T. (2012) · Cited by 161
IoT-enabled cloud-based additive manufacturing platform to support rapid product development
Wang, Y., Lin, Y. C., Zhong, R. Y., & Xu, X. W. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1516905 · Cited by 158
Effect of printing speed on quality of printed parts in Binder Jetting Process
Miyanaji, H., Momenzadeh, N., & Yang, L. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.12.008 · Cited by 156
A review on additive manufacturing and its way into the oil and gas industry
Sireesha, M., Lee, J., Kiran, A. S., Babu, V. J., Kee, B. B. T., & Ramakrishna, S. (2018) · RSC Advances · doi:10.1039/c8ra03194k · Cited by 147
Hirata, T., Kimura, T., & Nakamoto, T. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138713 · Cited by 145
Laser Polishing of Additive Manufactured Superalloy
Zhihao, F., Lu, L., Longfei, C., & Yingchun, G. (2018) · Procedia CIRP · doi:10.1016/j.procir.2018.05.088 · Cited by 135
Revilla‐León, M., Sadeghpour, M., & Özcan, M. (2020) · Journal of Prosthodontics · doi:10.1111/jopr.13212 · Cited by 135
Effects of Hot Isostatic Pressing on Copper Parts Fabricated via Binder Jetting
Kumar, A. Y., Bai, Y., Eklund, A., & Williams, C. B. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.07.084 · Cited by 124
Monitoring of laser metal deposition height by means of coaxial laser triangulation
Donadello, S., Motta, M., Demir, A. G., & Previtali, B. (2018) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2018.09.012 · Cited by 124
Benzing, J. T., Hrabe, N. W., Quinn, T. P., White, R. M., Rentz, R. A., & Ahlfors, M. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.126690 · Cited by 123
Cai, C., Song, B., Xue, P., Wei, Q., Wu, J., Li, W., & Shi, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.280 · Cited by 107
Fabrication and properties of novel polymer-metal composites using fused deposition modeling
Ryder, M. A., Lados, D. A., Iannacchione, G. S., & Peterson, A. M. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.01.049 · Cited by 107
Frandsen, C. S., Nielsen, M. M., Chaudhuri, A., Jayaram, J., & Govindan, K. (2019) · International Journal of Production Research · doi:10.1080/00207543.2019.1605226 · Cited by 106
Consolidating spare parts for asset maintenance with additive manufacturing
Knofius, N., van der Heijden, M. C., & Zijm, W. H. M. (2018) · International Journal of Production Economics · doi:10.1016/j.ijpe.2018.11.007 · Cited by 103
Wheat, E., Vlasea, M., Hinebaugh, J., & Metcalfe, C. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.038 · Cited by 103
The additive manufacturing (AM) of titanium alloys
Dutta, B., & (Sam) Froes, F. H. (2015) · Titanium Powder Metallurgy · doi:10.1016/b978-0-12-800054-0.00024-1 · Cited by 101
Qualification and certification of metal additive manufactured hardware for aerospace applications
Russell, R., Wells, D., Waller, J., Poorganji, B., Ott, E., Nakagawa, T., Sandoval, H., Shamsaei, N., & Seifi, M. (2019) · Additive Manufacturing for the Aerospace Industry · doi:10.1016/b978-0-12-814062-8.00003-0 · Cited by 97
Bordeenithikasem, P., Stolpe, M., Elsen, A., & Hofmann, D. C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.023 · Cited by 93
Yan, X., Huang, C., Chen, C., Bolot, R., Dembinski, L., Huang, R., Ma, W., Liao, H., & Liu, M. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.072 · Cited by 92
Status, comparison, and future of the representations of additive manufacturing data
Qin, Y., Qi, Q., Scott, P. J., & Jiang, X. (2019) · Computer-Aided Design · doi:10.1016/j.cad.2019.02.004 · Cited by 92
A feasibility study on process monitoring and control in vat photopolymerization of ceramics
Hafkamp, T., van Baars, G. E., de Jager, B., & Etman, P. (2018) · Mechatronics · doi:10.1016/j.mechatronics.2018.02.006 · Cited by 88
Vilardell, A. M., Takezawa, A., du Plessis, A., Takata, N., Krakhmalev, P., Kobashi, M., Yadroitsava, I., & Yadroitsev, I. A. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138330 · Cited by 86
Manufacturing Processes of Integral Blade Rotors for Turbomachinery, Processes and New Approaches
González, H., Calleja, A., Lamíkiz, A., & de Lacalle, L. N. L. (2020) · Applied Sciences · doi:10.3390/app10093063 · Cited by 86
Calleja, A., Tabernero, I., EALO, J. A., Campa, F. J., Lamíkiz, A., & de Lacalle, L. N. L. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-6057-3 · Cited by 80
Li, Y., Yang, C., Hu, Q., Zhou, S., Ma, L., & Lim, M. K. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1543975 · Cited by 80
A novel quasicrystal-resin composite for stereolithography
Sakly, A., Kenzari, S., Bonina, D., Corbel, S., & Fournée, V. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.025 · Cited by 79
Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM)
Guo, H., Gingerich, M. B., Headings, L. M., Hahnlen, R., & Dapino, M. J. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.10.004 · Cited by 71
Yang, X., Liu, J., Cui, X., Jin, G. D., Liu, Z., Chen, Y., & Feng, X. (2019) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2019.03.001 · Cited by 56
Non-destructive testing for wire + arc additive manufacturing of aluminium parts
Bento, J. B., Lopez, A. B., Pires, I., Quintino, L., & Santos, T. G. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100782 · Cited by 56
3D and 4D Printing of Multistable Structures
Jeong, H. Y., An, S., Lim, Y., Jeong, M. J., Kim, N., & Jun, Y. C. (2020) · Applied Sciences · doi:10.3390/app10207254 · Cited by 46
Concurrent Structure and Process Optimization for Minimum Cost Metal Additive Manufacturing
Ulu, E., Huang, R., Kara, L. B., & Whitefoot, K. S. (2018) · Journal of Mechanical Design · doi:10.1115/1.4042112 · Cited by 44
Stochastic static analysis of Euler-Bernoulli type functionally graded structures
Wu, D., Gao, W., Hui, D., Gao, K., & Li, K. (2017) · Composites Part B Engineering · doi:10.1016/j.compositesb.2017.09.050 · Cited by 40
Information exchange standards for design, tolerancing and Additive Manufacturing: a research review
Xiao, J., Anwer, N., Durupt, A., Duigou, J. L., & Eynard, B. (2017) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-017-0401-4 · Cited by 37
Additive manufacturing of metal matrix composites via nanofunctionalization
Martin, J. H., Yahata, B. D., Clough, E. C., Mayer, J. A., Hundley, J. M., & Schaedler, T. A. (2018) · MRS Communications · doi:10.1557/mrc.2018.95 · Cited by 26
Technical feasibility analysis of utilizing special purpose machine tools
Vafadar, A., Tolouei-Rad, M., Hayward, K., & Abhary, K. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.02.003 · Cited by 25
Self-citationDistortion in Metal Additive Manufactured Parts
Kumar, H. A., & Kumaraguru, S. (2018) · Springer eBooks · doi:10.1007/978-981-13-0305-0_24 · Cited by 20
Considering Cold Spray for Additive Manufacturing
Villafuerte, J. (2014) · AM&P Technical Articles · doi:10.31399/asm.amp.2014-05.p050 · Cited by 19
Metal 3D Printing Applications in the Oil & Gas Industry
Burns, M., & Wangenheim, C. (2019) · SPE Middle East Oil and Gas Show and Conference · doi:10.2118/194787-ms · Cited by 12
Vafadar, A., Hayward, K. J., & Tolouei‐Rad, M. (2017) · International Journal of Production Research · doi:10.1080/00207543.2017.1308032 · Cited by 7
Self-citationFuture Challenges in Functionally Graded Additive Manufacturing
Pei, E., & Loh, G. H. (2018) · Springer eBooks · doi:10.1007/978-3-319-76084-1_15 · Cited by 7
Killen, A., Fu, L., Coxon, S., & Napper, R. (2018) · Monash University Research Portal (Monash University) · Cited by 7
Cited by
Nazir, A., Gokcekaya, O., Md Masum Billah, K., Ertugrul, O., Jiang, J., Sun, J., & Hussain, S. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.111661 · Cited by 773
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Additive manufacturing by digital light processing: a review
Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 450
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Alami, A. H., Ghani Olabi, A., Alashkar, A., Alasad, S., Aljaghoub, H., Rezk, H., & Abdelkareem, M. A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2023.102516 · Cited by 349
Metadata
- Authors
- Vafadar, A., Guzzomi, F., Rassau, A., & Hayward, K.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2021-01-28
- Volume
- 11
- Issue
- 3
- Pages
- 1213
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W3127569765
- Cited by
- 748
- References
- 93
- FWCI
- 44.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.