The DOI matches its Crossref record; 174 of the 174 references it cites were found in a registry or an index.
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Open accessAbstract
As one of the most promising new energy sources, the lithium-ion battery (LIB) and its associated safety concerns have attracted great research interest. Herein, a comprehensive review on the thermal hazards of LIBs and the corresponding countermeasures is provided. In general, the thermal hazards of the LIB can be caused or aggravated by several factors including physical, electrical and thermal factors, manufacturing defect and even battery aging. Due to the activity and combustibility of traditional battery components, they usually possess a relatively high thermal hazard and a series of side reactions between electrodes and electrolytes may occur under abusive conditions, which would further lead to the thermal failure of LIBs. Besides, the thermal hazards generally manifest as the thermal runaway behaviors such as high-temperature, ejection, combustion, explosion and toxic gases for a single battery, and it can even evolve to thermal failure propagation within a battery pack. To decrease these hazards, some countermeasures are reviewed including the application of safety devices, fire-retardant additives, battery management systems, hazard warnings and firefighting should a hazard occur.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Arora, P., & Zhang, Z. (. (2004) · Chemical Reviews · doi:10.1021/cr020738u · Cited by 2,175
Solar energy for future world: A review
Kannan, N., & Vakeesan, D. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.022 · Cited by 2,104
Research opportunities to advance solar energy utilization
Lewis, N. S. (2016) · Science · doi:10.1126/science.aad1920 · Cited by 2,075
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Lithium insertion into manganese spinels
Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B. (1983) · Materials Research Bulletin · doi:10.1016/0025-5408(83)90138-1 · Cited by 1,778
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
New prospects in flame retardant polymer materials: From fundamentals to nanocomposites
Laoutid, F., Bonnaud, L., Alexandre, M., Lopez-Cuesta, J.-M., & Dubois, P. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.09.002 · Cited by 1,690
α‐Fe2O3 Nanotubes in Gas Sensor and Lithium‐Ion Battery Applications
Chen, J., Xu, L., Li, W., & Gou, X. (2005) · Advanced Materials · doi:10.1002/adma.200401101 · Cited by 1,605
Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Myung, S.-T., Maglia, F., Park, K.-J., Yoon, C. S., Lamp, P., Kim, S.-J., & Sun, Y.-K. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00594 · Cited by 1,382
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Progress of enhancing the safety of lithium ion battery from the electrolyte aspect
Wang, Q., Jiang, L., Yu, Y., & Sun, J. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.10.035 · Cited by 915
Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes
Golubkov, A. W., Fuchs, D., Wagner, J., Wiltsche, H., Stangl, C., Fauler, G., Voitic, G., Thaler, A., & Hacker, V. (2014) · RSC Adv. · doi:10.1039/c3ra45748f · Cited by 901
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Thermal Runaway of Lithium-Ion Batteries without Internal Short Circuit
Liu, X., Ren, D., Hsu, H., Feng, X., Xu, G.-L., Zhuang, M., Gao, H., Lu, L., Han, X., Chu, Z., et al. (2018) · Joule · doi:10.1016/j.joule.2018.06.015 · Cited by 869
A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions
Wen, J., Yu, Y., & Chen, C. (2012) · Materials Express · doi:10.1166/mex.2012.1075 · Cited by 754
The Current Move of Lithium Ion Batteries Towards the Next Phase
Kim, T., Park, J., Chang, S. K., Choi, S., Ryu, J. H., & Song, H. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200028 · Cited by 742
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
Fuel cells for portable applications
Dyer, C. K. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01069-2 · Cited by 710
A review of hazards associated with primary lithium and lithium-ion batteries
Lisbona, D., & Snee, T. (2011) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2011.06.022 · Cited by 701
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Wu, C., Yin, P., Zhu, X., OuYang, C., & Xie, Y. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0633906 · Cited by 634
Thermal Model of Cylindrical and Prismatic Lithium-Ion Cells
Hatchard, T. D., MacNeil, D. D., Basu, A., & Dahn, J. R. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1377592 · Cited by 624
Ryou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
Richard, M. N., & Dahn, J. R. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391893 · Cited by 601
Thermal stability of LiPF6 salt and Li-ion battery electrolytes containing LiPF6
Yang, H., Zhuang, G. V., & Ross, P. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.058 · Cited by 599
A General Discussion of Li Ion Battery Safety
(2012) · Electrochemical Society Interface · doi:10.1149/2.f03122if · Cited by 592
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
Deformation mechanisms in crystalline polymers
Bowden, P. B., & Young, R. J. (1974) · Journal of Materials Science · doi:10.1007/bf00540553 · Cited by 551
Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling
Saw, L. H., Ye, Y., Tay, A. A. O., Chong, W. T., Kuan, S. H., & Yew, M. C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.122 · Cited by 527
The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge
Sloop, S. E., Kerr, J. B., & Kinoshita, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00149-6 · Cited by 517
Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry
Ribière, P., Grugeon, S., Morcrette, M., Boyanov, S., Laruelle, S., & Marlair, G. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02218k · Cited by 505
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Toxic fluoride gas emissions from lithium-ion battery fires
Larsson, F., Andersson, P., Blomqvist, P., & Mellander, B.-E. (2017) · Scientific Reports · doi:10.1038/s41598-017-09784-z · Cited by 462
Feng, X., He, X., Ouyang, M., Lu, L., Wu, P., Kulp, C., & Prasser, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.118 · Cited by 458
Thermal Stability Studies of Li‐Ion Cells and Components
Maleki, H., Deng, G., Anani, A., & Howard, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392458 · Cited by 437
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Advanced Separators for Lithium‐Ion and Lithium–Sulfur Batteries: A Review of Recent Progress
Xiang, Y., Li, J., Lei, J., Liu, D., Xie, Z., Qu, D., Li, K., Deng, T., & Tang, H. (2016) · ChemSusChem · doi:10.1002/cssc.201600943 · Cited by 404
Improving battery safety by early detection of internal shorting with a bifunctional separator
Wu, H., Zhuo, D., Kong, D., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6193 · Cited by 400
Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules
Lopez, C. F., Jeevarajan, J. A., & Mukherjee, P. P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0921509jes · Cited by 386
An Attempt to Formulate Nonflammable Lithium Ion Electrolytes with Alkyl Phosphates and Phosphazenes
Xu, K., Ding, M. S., Zhang, S. S., Allen, J. L., & Jow, T. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1467946 · Cited by 379
Ouyang, M., Chu, Z., Lu, L., Li, J., Han, X., Feng, X., & Liu, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.178 · Cited by 376
Zhu, Y., Wang, F., Liu, L., Xiao, S., Chang, Z., & Wu, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee23564a · Cited by 368
Zhang, J., Liu, Z., Kong, Q., Zhang, C., Pang, S., Yue, L., Wang, X., Yao, J., & Cui, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302290n · Cited by 368
Hwang, S., Chang, W., Kim, S. M., Su, D., Kim, D. H., Lee, J. Y., Chung, K. Y., & Stach, E. A. (2014) · Chemistry of Materials · doi:10.1021/cm403332s · Cited by 346
Li-Ion Battery Fire Hazards and Safety Strategies
Kong, L., Li, C., Jiang, J., & Pecht, M. G. (2018) · Energies · doi:10.3390/en11092191 · Cited by 343
Failure propagation in multi-cell lithium ion batteries
Lamb, J., Orendorff, C. J., Steele, L. A. M., & Spangler, S. W. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.081 · Cited by 335
Weakly Coordinating Anions, and the Exceptional Conductivity of Their Nonaqueous Solutions
Xu, W., & Angell, C. A. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1344281 · Cited by 333
Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells
Kawamura, T., Kimura, A., Egashira, M., Okada, S., & Yamaki, J.-I. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00960-0 · Cited by 332
Differential scanning calorimetry material studies: implications for the safety of lithium-ion cells
Zhang, Z., Fouchard, D., & Rea, J. R. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02611-6 · Cited by 330
Characterization of commercially available lithium-ion batteries
Johnson, B. A., & White, R. E. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02659-1 · Cited by 330
Lessons Learned from the 787 Dreamliner Issue on Lithium-Ion Battery Reliability
Williard, N., He, W., Hendricks, C., & Pecht, M. (2013) · Energies · doi:10.3390/en6094682 · Cited by 324
Guo, G., Long, B., Cheng, B., Zhou, S., Xu, P., & Cao, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.090 · Cited by 322
Characteristics of lithium-ion batteries during fire tests
Larsson, F., Andersson, P., Blomqvist, P., Lorén, A., & Mellander, B.-E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.027 · Cited by 313
Wang, W., Yang, X., Fang, Y., Ding, J., & Yan, J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.12.004 · Cited by 309
Jiang, J., & Dahn, J. R. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2003.10.011 · Cited by 303
A new approach toward improved low temperature performance of Li-ion battery
Zhang, S. S., Xu, K., & Jow, T. R. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00490-3 · Cited by 302 · cited 1×
“In addition, it is generally regarded that LiBF4 is superior to LiPF6 with respect to factors such as high-temperature performance, reaction characteristics with water and chemical stability [77,78].”
BackgroundStudy of the fire behavior of high-energy lithium-ion batteries with full-scale burning test
Ping, P., Wang, Q., Huang, P., Li, K., Sun, J., Kong, D., & Chen, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.035 · Cited by 302
Effects of overdischarge on performance and thermal stability of a Li-ion cell
Maleki, H., & Howard, J. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.043 · Cited by 302
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Toxicity, a serious concern of thermal runaway from commercial Li-ion battery
Sun, J., Li, J., Zhou, T., Yang, K., Wei, S., Tang, N., Dang, N., Li, H., Qiu, X., & Chen, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.06.031 · Cited by 295
Improving thermal conductivity phase change materials—A study of paraffin nanomagnetite composites
Şahan, N., Fois, M., & Paksoy, H. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.01.027 · Cited by 292
Zhang, J., Yue, L., Kong, Q., Liu, Z., Zhou, X., Zhang, C., Xu, Q., Zhang, B., Ding, G., Qin, B., et al. (2014) · Scientific Reports · doi:10.1038/srep03935 · Cited by 289
Zhang, L., Zhou, K., Wei, Q., Ma, L., Ye, W., Li, H., Zhou, B., Yu, Z., Lin, C.-T., Luo, J., et al. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.10.036 · Cited by 282
Capacity fade of Sony 18650 cells cycled at elevated temperatures
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00473-1 · Cited by 280
Shang, Z., Qi, H., Liu, X., Ouyang, C., & Wang, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.074 · Cited by 275
Glass transition temperature as a guide to selection of polymers suitable for PTC materials
Meyer, J. (1973) · Polymer Engineering & Science · doi:10.1002/pen.760130611 · Cited by 273
Keane, R. E., Cary, G. J., Davies, I. D., Flannigan, M. D., Gardner, R. H., Lavorel, S., Lenihan, J. M., Li, C., & Rupp, T. S. (2004) · Ecological Modelling · doi:10.1016/j.ecolmodel.2004.03.015 · Cited by 269
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries
Wang, Q., Sun, J., Yao, X., & Chen, C. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2139955 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Smart, M. C., Ratnakumar, B. V., Whitcanack, L. D., Chin, K. B., Surampudi, S., Croft, H., Tice, D., & Staniewicz, R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00154-x · Cited by 247
Failure mechanism of Li-ion battery at overcharge conditions
Belov, D., & Yang, M.-H. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-007-0449-3 · Cited by 243
Coman, P. T., Rayman, S., & White, R. E. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.088 · Cited by 235
Modeling thermal management of lithium-ion PNGV batteries
Nelson, P., Dees, D., Amine, K., & Henriksen, G. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00197-0 · Cited by 234
Al-Zareer, M., Dincer, I., & Rosen, M. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.067 · Cited by 228
Mohanty, D., Hockaday, E., Li, J., Hensley, D. K., Daniel, C., & Wood, D. L. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.007 · Cited by 226
Mutyala, M. S. K., Zhao, J., Li, J., Pan, H., Yuan, C., & Li, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.004 · Cited by 219
Minimization of thermal non-uniformity in lithium-ion battery pack cooled by channeled liquid flow
Zhao, C., Sousa, A. C. M., & Jiang, F. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.10.017 · Cited by 214
Thermal stability of graphite anode with electrolyte in lithium-ion cells
Yamaki, J. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00060-7 · Cited by 213
The Effects of Defects on Localized Plating in Lithium-Ion Batteries
Cannarella, J., & Arnold, C. B. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1051507jes · Cited by 210
Kang, S. M., Ryou, M.-H., Choi, J. W., & Lee, H. (2012) · Chemistry of Materials · doi:10.1021/cm301967f · Cited by 206
Ling, Z., Cao, J., Zhang, W., Zhang, Z., Fang, X., & Gao, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.143 · Cited by 205
LiBOB: Is it an alternative salt for lithium ion chemistry?
Xu, K., Zhang, S. S., Lee, U., Allen, J. L., & Jow, T. R. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.153 · Cited by 203
Ling, Z., Wen, X., Zhang, Z., Fang, X., & Gao, X. (2018) · Energy · doi:10.1016/j.energy.2017.12.098 · Cited by 202
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Alshaer, W. G., Nada, S. A., Rady, M. A., Le Bot, C., & Palomo Del Barrio, E. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.045 · Cited by 196
Investigation of a commercial lithium-ion battery under overcharge/over-discharge failure conditions
Ouyang, D., Chen, M., Liu, J., Wei, R., Weng, J., & Wang, J. (2018) · RSC Advances · doi:10.1039/c8ra05564e · Cited by 196
Self-citationA highly concentrated phosphate-based electrolyte for high-safety rechargeable lithium batteries
Shi, P., Zheng, H., Liang, X., Sun, Y., Cheng, S., Chen, C., & Xiang, H. (2018) · Chemical Communications · doi:10.1039/c8cc00994e · Cited by 190
Feng, X., Xu, C., He, X., Wang, L., Zhang, G., & Ouyang, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.003 · Cited by 185
The combustion behavior of large scale lithium titanate battery
Huang, P., Wang, Q., Li, K., Ping, P., & Sun, J. (2015) · Scientific Reports · doi:10.1038/srep07788 · Cited by 182
HEV battery heating using AC currents
Stuart, T. A., & Hande, A. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.10.014 · Cited by 182
Simulation of abuse tolerance of lithium-ion battery packs
Spotnitz, R. M., Weaver, J., Yeduvaka, G., et al. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.013 · Cited by 180
Ruan, H., Jiang, J., Sun, B., Zhang, W., Gao, W., Wang, L. Y., & Ma, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.05.151 · Cited by 180
Diffusion induced stress in layered Li-ion battery electrode plates
Zhang, J., Lu, B., Song, Y., & Ji, X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.104 · Cited by 179
Coman, P. T., Darcy, E. C., Veje, C. T., & White, R. E. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.033 · Cited by 175
Recent Advances in Non-Flammable Electrolytes for Safer Lithium-Ion Batteries
Chawla, N., Bharti, N., & Singh, S. (2019) · Batteries · doi:10.3390/batteries5010019 · Cited by 169
Study of the fire hazards of lithium-ion batteries at different pressures
Chen, M., Liu, J., He, Y., Yuen, R. K. K., & Wang, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.06.131 · Cited by 166
Self-citationMohammadian, S. K., He, Y., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.05.055 · Cited by 161
Li, K., Yan, J., Chen, H., & Wang, Q. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.131 · Cited by 155
Ma, L., Nie, M., Xia, J., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.039 · Cited by 150
Polymeric Ionic Liquid Gel Electrolyte for Room Temperature Lithium Battery Applications
Safa, M., Chamaani, A., Chawla, N., & El‐Zahab, B. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.07.118 · Cited by 148
Super-cooling prevention of microencapsulated phase change material
Fan, Y., Zhang, X., Wang, X., et al. (2003) · Thermochimica Acta · doi:10.1016/j.tca.2003.11.006 · Cited by 145
Characterization of thermal cut-off mechanisms in prismatic lithium-ion batteries
Venugopal, G. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00782-0 · Cited by 142
Li, X., Li, W., Chen, L., Lu, Y., Su, Y., Bao, L., Wang, J., Chen, R., Chen, S., & Wu, F. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.085 · Cited by 142
Self-citationConformal Surface Coatings to Enable High Volume Expansion Li‐Ion Anode Materials
Riley, L. A., Cavanagh, A. S., George, S. M., Jung, Y. S., Yan, Y., Lee, S., & Dillon, A. C. (2010) · ChemPhysChem · doi:10.1002/cphc.201000158 · Cited by 141
Ionic Liquid Electrolytes for Safer Lithium Batteries
Moreno, M., Simonetti, E., Appetecchi, G. B., Carewska, M., Montanino, M., Kim, G., Loeffler, N., & Passerini, S. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0051701jes · Cited by 139
Xie, Y., Tang, J., Shang, S., Xing, Y., Wu, H., Hu, Z., & Wen, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.046 · Cited by 137
Wang, Q., Shao, G., Duan, Q., Chen, M., Li, Y., Wu, K., Liu, B., Peng, P., & Sun, J. (2015) · Fire Technology · doi:10.1007/s10694-015-0531-9 · Cited by 136
Self-citationRealization, test and modelling of honeycomb wallboards containing a Phase Change Material
Hasse, C., Grenet, M., Bontemps, A., Dendievel, R., & Sallee, H. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.09.017 · Cited by 135
Zhang, L., Ma, Y., Cheng, X., Du, C., Guan, T., Cui, Y., Sun, S., Zuo, P., Gao, Y., & Yin, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.040 · Cited by 134
In Situ Monitoring of Temperature inside Lithium-Ion Batteries by Flexible Micro Temperature Sensors
Lee, C., Lee, S.-J., Tang, M.-S., & Chen, P.-C. (2011) · Sensors · doi:10.3390/s111009942 · Cited by 134
Wu, Y., Saxena, S., Xing, Y., Wang, Y., Li, C., Yung, W., & PECHT, M. G. (2018) · Energies · doi:10.3390/en11040925 · Cited by 128
Yang, Y., Pang, Y., Liu, Y., & Guo, H. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.01.025 · Cited by 125
Wrodnigg, G. H., Besenhard, J. O., & Winter, M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00536-5 · Cited by 123
An Experimental Study on the Thermal Failure Propagation in Lithium-Ion Battery Pack
Ouyang, D., Liu, J., Chen, M., Weng, J., & Wang, J. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0721810jes · Cited by 122
Self-citationWang, S., Li, K., Tian, Y., Wang, J., Wu, Y., & Ji, S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.061 · Cited by 120
Self-citationScenario-based prediction of Li-ion batteries fire-induced toxicity
Lecocq, A., Eshetu, G. G., Grugeon, S., Martin, N., Laruelle, S., & Marlair, G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.090 · Cited by 111
Wu, W., Wu, W., Qiu, X., & Wang, S. (2019) · International Journal of Energy Research · doi:10.1002/er.4257 · Cited by 108 · cited 1×
“The aged battery will lose quantities of lithium and active materials [70,71].”
BackgroundTemperature-sensitive cathode materials for safer lithium-ion batteries
Xia, L., Li, S., Ai, X., Yang, H., & Cao, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00590h · Cited by 107
Ignition and combustion characteristics of lithium ion batteries under low atmospheric pressure
Fu, Y., Lu, S., Shi, L. X., Cheng, X., & Zhang, H. (2018) · Energy · doi:10.1016/j.energy.2018.06.129 · Cited by 105
Kim, D., Jung, J., Kim, Y., Lee, M., Seo, J., & Khan, S. B. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.12.049 · Cited by 102
Ouyang, D., He, Y., Chen, M., Liu, J., & Wang, J. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6888-x · Cited by 96
Self-citationWang, C., Zhang, G., Li, X., Huang, J., Wang, Z., Lv, Y., Meng, L., Situ, W., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3916 · Cited by 94
Self-citationEnergetics of lithium ion battery failure
Lyon, R. E., & Walters, R. N. (2016) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2016.06.047 · Cited by 93
Investigation into the Fire Hazards of Lithium-Ion Batteries under Overcharging
Ouyang, D., Liu, J., Chen, M., & Wang, J. (2017) · Applied Sciences · doi:10.3390/app7121314 · Cited by 93
Self-citationSpinner, N. S., Field, C. R., Hammond, M. H., Williams, B. A., Myers, K. M., Lubrano, A. L., Rose‐Pehrsson, S. L., & Tuttle, S. G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.068 · Cited by 92
Nelson, K. J., Déon, G., Wright, A., Ma, L., Xia, J., & Dahn, J. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0831506jes · Cited by 92
Takahashi, Y., Tode, S., Kinoshita, A., Fujimoto, H., Nakane, I., & Fujitani, S. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2916685 · Cited by 89
Zhao, S., Lou, D., Zhan, P., Li, G., Dai, K., Guo, J., Zheng, G., Liu, C., Shen, C., & Guo, Z. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02472j · Cited by 88
Richter, F., Vie, P. J. S., Kjelstrup, S., & Burheim, O. S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.07.173 · Cited by 84
Huang, P., Verma, A., Robles, D. J., Wang, Q., Mukherjee, P. P., & Sun, J. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.121 · Cited by 78
Ma, L., Xia, J., Xia, X., & Dahn, J. R. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0091410jes · Cited by 77
Zhang, S., Wu, W. T., & Wang, S. (2018) · Energy · doi:10.1016/j.energy.2018.07.075 · Cited by 75
Zheng, Y., Shi, Y., & Huang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.090 · Cited by 74
Ding, M. S., Xu, K., & Jow, T. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1513556 · Cited by 71
Lee, T., Kim, W.-K., Lee, Y., Ryou, M.-H., & Lee, Y. M. (2014) · Macromolecular Research · doi:10.1007/s13233-014-2163-1 · Cited by 69
Murmann, P., Mönnighoff, X., von Aspern, N., Janßen, P., Kalinovich, N., Shevchuk, M., Kazakova, O., Röschenthaler, G., Cekić-Lasković, I., & Winter, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1031605jes · Cited by 68
Liu, Y., Ouyang, C., Jiang, Q., & Liang, B. (2015) · Journal of Central South University · doi:10.1007/s11771-015-2941-8 · Cited by 61
Research and Development of Fire Extinguishing Technology for Power Lithium Batteries
Luo, W.-T., Zhu, S.-B., Gong, J.-H., & Zhou, Z. L. (2018) · Procedia Engineering · doi:10.1016/j.proeng.2017.12.045 · Cited by 56
Study on degradation behavior of commercial 18650 LiAlNiCoO 2 cells in over‐charge conditions
Kong, D., Wen, R., Ping, P., Peng, R., Zhang, J., & Chen, G. (2018) · International Journal of Energy Research · doi:10.1002/er.4302 · Cited by 52
Intoxication following the inhalation of hydrogen fluoride
Braun, J., St��, H., & Zober, A. (1984) · Archives of Toxicology · doi:10.1007/bf00316353 · Cited by 51
Andersson, P., Blomqvist, P., Lorén, A., & Larsson, F. (2016) · Fire and Materials · doi:10.1002/fam.2359 · Cited by 51
Thermal conductivity enhancement of erythritol phase change material with percolated aluminum filler
Sheng, N., Dong, K., Zhu, C., Akiyama, T., & Nomura, T. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.02.033 · Cited by 50
Huang, Q., Ma, L., Liu, A., Ma, X.-W., Li, J., Wang, J., & Dahn, J. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.036 · Cited by 49
Self-citationWang, Z., Li, X., Zhang, G., Lv, Y., He, J., Luo, J., Yang, C., & Yang, C. (2017) · RSC Advances · doi:10.1039/c7ra03963h · Cited by 44
Self-citationWENG, W., Hasemi, Y., & Fan, W. (2006) · Combustion and Flame · doi:10.1016/j.combustflame.2005.12.016 · Cited by 38
Experimental Quantification of Vent Mechanism Flow Parameters in 18650 Format Lithium Ion Batteries
Mier, F. A., Hargather, M. J., & Ferreira, S. R. (2019) · Journal of Fluids Engineering · doi:10.1115/1.4042962 · Cited by 37
Enhancing the safety of lithium ion batteries by 4-isopropyl phenyl diphenyl phosphate
Wang, Q., & Sun, J. (2006) · Materials Letters · doi:10.1016/j.matlet.2006.11.060 · Cited by 31
Nagasubramanian, G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00246-5 · Cited by 29
Effect of polysulfide-containing electrolyte on the film formation of the negative electrode
Wagner, M. W., Liebenow, C., & Besenhard, J. O. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(97)02586-x · Cited by 29
Combustion characteristics of primary lithium battery at two altitudes
Chen, M., Liu, J., Lin, X., Huang, Q., Yuen, R. K. K., & Wang, J. (2016) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5219-3 · Cited by 28
Self-citationMönnighoff, X., Murmann, P., Weber, W., Winter, M., & Nowak, S. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.06.125 · Cited by 28
Potential use of geothermal energy sources for the production of lithium-ion batteries
Sævarsdóttir, G., Tao, P.-C., Stefánsson, H., et al. (2012) · Renewable Energy · doi:10.1016/j.renene.2012.04.028 · Cited by 27
Detection of off gassing from Li-ion batteries
Hill, D. M., Gully, B. H., Agarwal, A. S., Nourai, A., Thrun, L. B., Swartz, S. L., Koslowske, M., Cummings, S., Butkowski, J., & Moore, B. (2013) · IEEE Energytech · doi:10.1109/energytech.2013.6645307 · Cited by 25
Heat Transfer in Lead‐Acid Batteries Designed for Electric‐Vehicle Propulsion Application
Choi, K.-H., & Yao, N. P. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129270 · Cited by 25
Flame retardant coated polyolefin separators for the safety of lithium ion batteries
Lee, J.-Y., Shin, S., & Moon, S. (2015) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0119-6 · Cited by 18
Dagger, T., Meier, V., Hildebrand, S., Brüggemann, D., Winter, M., & Schappacher, F. M. (2018) · Energy Technology · doi:10.1002/ente.201800131 · Cited by 14
Ruiz, J., Ganatra, Y., Bruce, A. N., Howarter, J. A., & Marconnet, A. M. (2017) · I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems · doi:10.1109/itherm.2017.7992499 · Cited by 7
Lithium Battery Safety: A look at Woods Hole Oceanographic Institution’s Program
Reif, R. H., Liffers, M., Forrester, N. C., & Peal, K. R. (2010) · Professional safety · Cited by 6
Cited by
A review on thermal management of lithium-ion batteries for electric vehicles
Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022) · Energy · doi:10.1016/j.energy.2021.121652 · Cited by 1,097
A Review of Battery Fires in Electric Vehicles
Sun, P., Bisschop, R., Niu, H., & Huang, X. (2020) · Fire Technology · doi:10.1007/s10694-019-00944-3 · Cited by 891
A review of safety strategies of a Li-ion battery
Chombo, P. V., & Laoonual, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228649 · Cited by 596
A review on recent progress, challenges and perspective of battery thermal management system
Lin, J., Liu, X., Li, S., Zhang, C., & Yang, S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2020.120834 · Cited by 588
Chen, S., Dai, F., & Cai, M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01545 · Cited by 362
Metadata
- Authors
- Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J.
- Venue
- Applied Sciences
- Publisher
- MDPI AG
- Published
- 2019-06-18
- Volume
- 9
- Issue
- 12
- Pages
- 2483
- ISSN
- 2076-3417 (ISSN-L)
- OpenAlex
- W2949844740
- Cited by
- 306
- References
- 174
- FWCI
- 14.42
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.