Battery State of Health Estimate Strategies: From Data Analysis to End-Cloud Collaborative Framework
Open accessThe DOI matches its Crossref record; 239 of the 242 references it cites were found in a registry or an index.
Abstract
Lithium-ion batteries have become the primary electrical energy storage device in commercial and industrial applications due to their high energy/power density, high reliability, and long service life. It is essential to estimate the state of health (SOH) of batteries to ensure safety, optimize better energy efficiency and enhance the battery life-cycle management. This paper presents a comprehensive review of SOH estimation methods, including experimental approaches, model-based methods, and machine learning algorithms. A critical and in-depth analysis of the advantages and limitations of each method is presented. The various techniques are systematically classified and compared for the purpose of facilitating understanding and further research. Furthermore, the paper emphasizes the prospect of using a knowledge graph-based framework for battery data management, multi-model fusion, and cooperative edge-cloud platform for intelligent battery management systems (BMS).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Big historical data must be available for the AI models to make accurate predictions, but obtaining feld-collected data from batteries operated in various settings is a challenge [177].”
From Artificial Intelligence Approaches for SOH Estimation in Lithium-Ion Batteries: A Comprehensive Review of Progress, Critical Evaluations, Challenges, and Toward Future Outlooks (2025) · cites this paper as [177]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“The P2D model combines porous electrode theory and concentrated solution theory to provide a fundamental theoretical framework for the physical and electrochemical processes occurring within lithium-ion batteries [147].”
MethodThe timescale identification decoupling complicated kinetic processes in lithium batteries
Lu, Y., Zhao, C.-Z., Huang, J.-Q., & Zhang, Q. (2022) · Joule · doi:10.1016/j.joule.2022.05.005 · Cited by 2,378 · cited 2×
“The distribution of relaxation times (DRT) analysis method is introduced to distinguish the main time constants of electrochemical processes [51–53], offering an intuitive description of the complicated properties using multiple RC (Resistor Capacitor) networks [54].”
MethodRemaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162 · cited 1×
“After obtaining the EIS measurement, HI features can be extracted for SOH estimation [61,62].”
MethodSelf-citationSimulation and Optimization of the Dual Lithium Ion Insertion Cell
Fuller, T. F., Doyle, M., & Newman, J. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2054684 · Cited by 2,057 · cited 1×
“The majority of electrochemical models for lithium-ion batteries are based on the work of John Newman and his colleagues [145,146].”
BackgroundDegradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945 · cited 1×
“…battery degradation can be categorized into two modes: reduction of lithium inventory caused by side reactions (the formation of solid electrolyte interface (SEI) [12,13], lithium plating [14,15], etc.), and loss of active material in the electrodes (graphite exfoliation, electrode cracking, etc.).”
BackgroundA review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745 · cited 1×
“[8,9] The state of health (SOH) of a battery, which reflects its ability to store and deliver energy relative to its initial state, is a key indicator of aging.”
BackgroundSelf-citationNg, K. S., Moo, C.-S., Chen, Y.-P., & Hsieh, Y.-C. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.021 · Cited by 1,636 · cited 1×
“However, the method relies on the maximum initial capacity, which is provided by battery manufacturers, and the accuracy is usually indiscernible [25].”
MethodLithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592 · cited 2×
“The IC stages of positive and negative materials [76].”
BackgroundSelf-citationComparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569 · cited 1×
“The P2D model can considerably explain the internal electro-chemical kinetics and mass transport processes of the battery and investigate the capacity decay of the battery by accurately simulating the internal electrochemical processes of the battery (Figure 4f) [148].”
BackgroundGuided Lamb waves for identification of damage in composite structures: A review
Su, Z., Ye, L., & Lu, Y. (2006) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2006.01.020 · Cited by 1,560 · cited 1×
“In an attempt to reduce the intervention of the sensor on cells, a novel approach based on acousto-ultrasonic guided waves has been proposed [108].”
BackgroundZhang, Y., Xiong, R., He, H., & Pecht, M. G. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2805189 · Cited by 1,326 · cited 1×
“Zhang et al. pointed out LSTM RNN can capture long-term dependencies better than SVM and SimRNN [205].”
BackgroundHu, X., Xu, L., Lin, X., & Pecht, M. (2020) · Joule · doi:10.1016/j.joule.2019.11.018 · Cited by 1,320 · cited 1×
“[8,9] The state of health (SOH) of a battery, which reflects its ability to store and deliver energy relative to its initial state, is a key indicator of aging.”
BackgroundBenchmarking the performance of all-solid-state lithium batteries
Randau, S., Weber, D. A., Kötz, O., Koerver, R., Braun, P., Weber, A., Ivers-Tiffée, E., Adermann, T., Kulisch, J., Zeier, W. G., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0565-1 · Cited by 1,219 · cited 2×
“…analysis method is introduced to distinguish the main time constants of electrochemical processes [51–53], offering an intuitive description of Apart from the frequency domain method, the time domain analysis of EIS data is also suitable for decomposing kinetic processes inside the cells [49,50].”
MethodData-driven health estimation and lifetime prediction of lithium-ion batteries: A review
Li, Y., Liu, K., Foley, A. M., Zülke, A., Berecibar, M., Nanini-Maury, E., Van Mierlo, J., & Hoster, H. E. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109254 · Cited by 1,193 · cited 1×
“…posterior distribution of the output prediction, which is very useful to quantify the prediction uncertainty in case the output variables are uncertain due to noisy measurements etc. GPR has been widely adopted to predict a battery’s SOH due to its non-parametric and probabilistic nature [166–169].”
BackgroundInfoGAN: Interpretable Representation Learning by Information Maximizing Generative Adversarial Nets
Chen, X., Duan, Y., Houthooft, R., Schulman, J., Sutskever, I., & Abbeel, P. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1606.03657 · Cited by 1,156 · cited 1×
“The InfoGAN extracts interpretable and meaningful representations by introducing variational lower bounds to maximize the mutual information between latent variables and observations [224].”
BackgroundHe, W., Williard, N., Osterman, M., & Pecht, M. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.040 · Cited by 1,105 · cited 1×
“He et al. applied the Dempster–Shafer evidence theory (DST) in combination with an empirical model based on electrochemical impedance spectroscopy (EIS) to estimate the degradation of lithium-ion batteries [175].”
MethodSynthesize battery degradation modes via a diagnostic and prognostic model
Dubarry, M., Truchot, C., & Liaw, B. Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.016 · Cited by 1,065 · cited 1×
“The peak fitting function method can track each peak of the IC and DV curves independently but cannot accurately capture the part between the peaks and is less accurate for the assumption of symmetry [95].”
MethodWaag, W., Fleischer, C., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.064 · Cited by 1,059 · cited 1×
“Because the instantaneous current is applied to the battery, the calculated R does not include the polarization effect, and ohmic resistance is the major reason for the potential drop across the battery [31].”
BackgroundGeneration and Evolution of the Solid Electrolyte Interphase of Lithium-Ion Batteries
Heiskanen, S. K., Kim, J., & Lucht, B. L. (2019) · Joule · doi:10.1016/j.joule.2019.08.018 · Cited by 1,036 · cited 1×
“…battery degradation can be categorized into two modes: reduction of lithium inventory caused by side reactions (the formation of solid electrolyte interface (SEI) [12,13], lithium plating [14,15], etc.), and loss of active material in the electrodes (graphite exfoliation, electrode cracking, etc.).”
BackgroundHan, X., Ouyang, M., Lu, L., Li, J., Zheng, Y., & Li, Z. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.029 · Cited by 822 · cited 1×
“Han et al. derived a power law battery aging model based on the Arrhenius equation, which includes temperature as a parameter and is a function of the number of cycles [141].”
MethodSelf-citationData-driven capacity estimation of commercial lithium-ion batteries from voltage relaxation
Zhu, J., Wang, Y., Huang, Y., Bhushan Gopaluni, R., Cao, Y., Heere, M., Mühlbauer, M. J., Mereacre, L., Dai, H., Liu, X., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-29837-w · Cited by 815 · cited 1×
“Support vector (SV) techniques are commonly used for battery state estimation [187,188].”
BackgroundSelf-citationYang, D., Zhang, X., Pan, R., Wang, Y., & Chen, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.03.015 · Cited by 765 · cited 1×
“Yang et al. proposed a new method for estimating the SOH of a battery using charging curves [170].”
MethodEfficient Direct Recycling of Lithium-Ion Battery Cathodes by Targeted Healing
Xu, P., Dai, Q., Gao, H., Liu, H., Zhang, M., Li, M., Chen, Y., An, K., Meng, Y. S., Liu, P., et al. (2020) · Joule · doi:10.1016/j.joule.2020.10.008 · Cited by 764 · cited 2×
“…battery recycling and second-life Moreover, they are critical in decision-making for lithium-ion battery recycling and second-life reuse [22]. reuse [22]. experimental techniques for battery SOH estimation The experimental techniques for battery SOH estimation are divided into direct…”
BackgroundA holistic aging model for Li(NiMnCo)O2 based 18650 lithium-ion batteries
Schmalstieg, J., Käbitz, S., Ecker, M., & Sauer, D. U. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.012 · Cited by 755 · cited 2×
“Ecker et al. developed an empirical resistance model to describe the battery’s aging process and to predict its lifespan [142,143] Empirical Empirical models have relatively few parameters and are easy to implement for onboard SOH monitoring, but they tend to have poor generalization performance…”
BackgroundModeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective
Northrop, P. W. C., De, S., Braatz, R. D., Ramadesigan, V., Northrop, P. W. C., Santhanagopalan, S., & Subramaniana, V. R. (2011) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 753
Gaussian process regression for forecasting battery state of health
Richardson, R. R., Osborne, M. A., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.004 · Cited by 732 · cited 1×
“Richardson et al. proposed a multi-output Gaussian regression model for SOH and RUL prediction and optimized the kernel functions by minimizing the negative log marginal likelihood (NLML) [172].”
MethodRandom forest regression for online capacity estimation of lithium-ion batteries
Li, Y., Zou, C., Berecibar, M., Nanini-Maury, E., Chan, J. C.-W., van den Bossche, P., Van Mierlo, J., & Omar, N. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.09.182 · Cited by 727 · cited 1×
“Li et al. utilized random forest regression to develop a model that learns the relationship between battery capacity and features extracted from charging voltage and capacity measurements [179].”
BackgroundXiong, R., Pan, Y., Shen, W., Li, H., & Sun, F. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110048 · Cited by 725 · cited 2×
“Both techniques are based on the identification of the drifting features of the battery’s open-circuit voltage (OCV) with aging [67,68].”
BackgroundIdentify capacity fading mechanism in a commercial LiFePO4 cell
Dubarry, M., & Liaw, B. Y. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.05.036 · Cited by 675 · cited 1×
“Various electrochemical analysis techniques (e.g., ICA, EIS) [18,19] have been used in previous studies on SOH estimation and battery aging modes identification.”
MethodEcker, M., Gerschler, J. B., Vogel, J., Käbitz, S., Hust, F., Dechent, P., & Sauer, D. U. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.012 · Cited by 642 · cited 2×
“Ecker et al. developed an empirical resistance model to describe the battery’s aging process and to predict its lifespan [142,143] Empirical Empirical models have relatively few parameters and are easy to implement for onboard SOH monitoring, but they tend to have poor generalization performance…”
BackgroundPatil, M. A., Tagade, P., Hariharan, K. S., Kolake, S. M., Song, T., Yeo, T., & Doo, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.119 · Cited by 626 · cited 1×
“Support vector regression (SVR) is an algorithm based on SV [193], which can predict continuous output variables.”
BackgroundLarge Chinese land carbon sink estimated from atmospheric carbon dioxide data
Wang, J., Feng, L., Palmer, P. I., Liu, Y., Fang, S., Bösch, H., O’Dell, C. W., Tang, X., Yang, D., Liu, L., et al. (2020) · Nature · doi:10.1038/s41586-020-2849-9 · Cited by 626
Li, J., Adewuyi, K., Lotfi, N., Landers, R. G., & Park, J. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.011 · Cited by 623 · cited 1×
“Li et al. developed an SP-based degradation model incorporating the effect of SEI formation and crack propagation caused by volume expansion [149].”
MethodDifferential voltage analyses of high-power, lithium-ion cells
Bloom, I., Jansen, A. N., Abraham, D. P., Knuth, J., Jones, S. A., Battaglia, V. S., & Henriksen, G. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.021 · Cited by 585 · cited 1×
“Boom et al. performed calendar aging tests on 18,650 batteries and separated electrode information using DVA [88].”
MethodWeng, C., Cui, Y., Sun, J., & Peng, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.012 · Cited by 561 · cited 1×
“Weng et al. developed an SOH monitoring framework, which provided a quantitative correlation between IC peak and battery capacity decay [96].”
BackgroundSupport Vector Machines Used to Estimate the Battery State of Charge
Álvarez Antón, J. C., García Nieto, P. J., Blanco Viejo, C., & Vilán Vilán, J. A. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2243918 · Cited by 512
Feng, X., Weng, C., He, X., Han, X., Lu, L., Ren, D., & Ouyang, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2927120 · Cited by 505 · cited 1×
“Feng et al. used charging curves at different SOH to construct support vector machine (SVM) models and identified the features of the different models using a support vector parameter identification algorithm [190].”
MethodSelf-citationArtificial Intelligence Applied to Battery Research: Hype or Reality?
Lombardo, T., Duquesnoy, M., El-Bouysidy, H., Årén, F., Gallo-Bueno, A., Jørgensen, P. B., Bhowmik, A., Demortière, A., Ayerbe, E., Alcaide, F., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00108 · Cited by 503 · cited 2×
“The method allows predicting the class associated with a new input by comparing it with the k nearest-neighbor points in the multidimensional feature space, as long as the different groups are determined by the training data [187].”
BackgroundMethodSelf-citationModeling electrochemical impedance spectroscopy
Ciucci, F. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.12.003 · Cited by 498 · cited 2×
“5 of 37 The fundamental behind EIS is the identification of different reaction rates in the electrochemical process through their corresponding frequency characteristics when alternating signals are applied [38].”
BackgroundHe, H., Xiong, R., Guo, H., & Li, S. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.04.014 · Cited by 462
Eddahech, A., Briat, O., Bertrand, N., Delétage, J.-Y., & Vinassa, J.-M. (2012) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2012.04.050 · Cited by 462 · cited 1×
“Eddahech et al. were early adopters of employing RNN for battery aging prediction [202].”
MethodNonlinear aging characteristics of lithium-ion cells under different operational conditions
Schuster, S. F., Bach, T., Fleder, E., Müller, J., Brand, M., Sextl, G., & Jossen, A. (2015) · Journal of Energy Storage · doi:10.1016/j.est.2015.05.003 · Cited by 451 · cited 1×
“There are three direct indexes to characterize battery aging behavior, including changes in capacity, internal resistance, and impedance [23,24]. in capacity, internal resistance, and impedance [23,24].”
BackgroundLiu, D., Pang, J., Zhou, J., Peng, Y., & Pecht, M. (2013) · Microelectronics Reliability · doi:10.1016/j.microrel.2013.03.010 · Cited by 443 · cited 1×
“Liu et al. conducted research on SOH prediction and prognostics for lithium-ion batteries using GPR and a combination Gaussian process functional regression (GPFR) [171].”
MethodPhase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries
Xu, C., Reeves, P. J., Jacquet, Q., & Grey, C. P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003404 · Cited by 429 · cited 1×
“…three phase transitions (H1-M-H2-H3), material For instance, during the charging process, the cathode comprised of nickel cobalt aluminum (NCA) material experiences three phase transitions (H1-M-H2-H3), while the anode material undergoes four phase transitions [77]. four phase transitions [77].”
BackgroundDubarry, M., Svoboda, V., Hwu, R., & Yann Liaw, B. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2221767 · Cited by 427 · cited 4×
“Incremental capacity analysis (ICA) and differential voltage analysis (DVA) are established techniques to qualitatively identify the major degradation modes [18,66].”
MethodInfluentialUnderstanding Li-based battery materials via electrochemical impedance spectroscopy
Gaberšček, M. (2021) · Nature Communications · doi:10.1038/s41467-021-26894-5 · Cited by 426
Galeotti, M., Cinà, L., Giammanco, C., Cordiner, S., & Di Carlo, A. (2015) · Energy · doi:10.1016/j.energy.2015.05.148 · Cited by 412 · cited 2×
“Moreover, the fitted parameters can represent some aging mechanisms, which cover loss of active loss) [46– 48]. data and a typical .”
BackgroundSui, X., He, S., Vilsen, S. B., Meng, J., Teodorescu, R., & Stroe, D.-I. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.117346 · Cited by 409 · cited 1×
“Typical probabilistic approaches focus on long-term forecasting of the battery’s remaining usable life [186].”
BackgroundLi, J., Herdem, M. S., Nathwani, J., & Wen, J. Z. (2023) · Energy and AI · doi:10.1016/j.egyai.2022.100208 · Cited by 409 · cited 2×
“Intelligent algorithms with multi-model fusion show particular advantages in terms of the accuracy of SOH prediction [236].”
Lithium-ion battery aging mechanisms and life model under different charging stresses
Gao, Y., Jiang, J., Zhang, C., Zhang, W., Ma, Z., & Jiang, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.084 · Cited by 397 · cited 1×
“The integral curves suggests the capacity This technique was then expanded to identify the battery aging mechanism under different conditions [72–74]. of the battery in the corresponding voltage peaks reflect the different phase transition IC curve is calculated as ∆ Q/ ∆ V within a fixed time or…”
BackgroundSelf-citationWu, B., Widanage, W. D., Yang, S., & Liu, X. (2020) · Energy and AI · doi:10.1016/j.egyai.2020.100016 · Cited by 396 · cited 1×
“Lastly, the potential of leveraging model fusion technology for real-time vehicle SOH prediction is deliberated, with a focus on employing end-cloud fusion battery management technology as the implementation framework [20,21].”
BackgroundSelf-citationChiang, Y.-H., Sean, W.-Y., & Ke, J.-C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.005 · Cited by 393 · cited 1×
“Chiang et al. utilized the Lyapunov stability criteria to develop an adaptation algorithm that extracts OCV and internal resistance without limitations of the input signal of battery systems [33].”
MethodRemmlinger, J., Buchholz, M., Meiler, M., Bernreuter, P., & Dietmayer, K. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.035 · Cited by 392 · cited 1×
“Therefore, the DC resistance test and Joule effect valuation are two suggested methods for ohmic resistance measuring [29].”
MethodA deep learning method for online capacity estimation of lithium-ion batteries
Shen, S., Sadoughi, M., Chen, X., Hong, M., & Hu, C. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100817 · Cited by 392 · cited 1×
“…form of CNN, exhibits a greater proficiency in learning abstract and high-level feature representations compared to traditional CNNs. Shen et al. utilized a DCNN for cell-level capacity estimation based on measurements of voltage, current, and charge capacity within partial charge cycles [201].”
BackgroundLi, X., Wang, Z., Zhang, L., Zou, C., & Dorrell, D. D. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.069 · Cited by 388
Self-citationKlass, V., Behm, M., & Lindbergh, G. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.116 · Cited by 381 · cited 1×
“Klass et al. proposed a method of applying standard battery performance tests to an SVM-based battery model [191].”
MethodEfficient Macro-Micro Scale Coupled Modeling of Batteries
Subramanian, V. R., Diwakar, V. D., & Tapriyal, D. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2032427 · Cited by 381 · cited 1×
“Based on the different theories of model construction and principles of state prediction algorithms, they can be divided into three categories: empirical models [130], equivalent circuit models [131,132], and electrochemical models based on physical chemistry [133,134].”
MethodBattery Health Prediction Using Fusion-Based Feature Selection and Machine Learning
Hu, X., Che, Y., Lin, X., & Onori, S. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3017090 · Cited by 379 · cited 1×
“Hu et al. conducted a study to compare the computational efficiency and effectiveness of various strategies for extracting health factors [238].”
BackgroundSmith, K., & Wang, C.-Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.050 · Cited by 373 · cited 1×
“Based on the different theories of model construction and principles of state prediction algorithms, they can be divided into three categories: empirical models [130], equivalent circuit models [131,132], and electrochemical models based on physical chemistry [133,134].”
MethodGu, X., See, K. W., Li, P., Shan, K., Wang, Y., Zhao, L., Lim, K. C., & Zhang, N. (2023) · Energy · doi:10.1016/j.energy.2022.125501 · Cited by 373
Jiang, B., Zhu, J., Wang, X., Wei, X., Shang, W., & Dai, H. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119502 · Cited by 367 · cited 1×
“Jiang et al. compared different EIS features, including broadband EIS, model parameters, and fixed-frequency impedance features, for SOH estimation using Gaussian process regression [63].”
MethodOperando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors
Huang, J., Albero Blanquer, L., Bonefacino, J., Logan, E. R., Alves Dalla Corte, D., Delacourt, C., Gallant, B. M., Boles, S. T., Dahn, J. R., Tam, H.-Y., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0665-y · Cited by 363 · cited 1×
“[117], the single film fiber SMF-FBG technique was used to measure the temperature and stress of a cell simultaneously with high accuracy.”
MethodAging Mechanisms of LiFePO[sub 4] Batteries Deduced by Electrochemical and Structural Analyses
Liu, P., Wang, J., Hicks-Garner, J., Sherman, E., Soukiazian, S., Verbrugge, M., Tataria, H., Musser, J., & Finamore, P. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3294790 · Cited by 358 · cited 1×
“Liu et al. used DVA and impedance measurements to verify that the major degradation mechanism of LiFePO 4 cells is LAM rather than impedance increase [90].”
MethodMa, Y., Shan, C., Gao, J., & Chen, H. (2022) · Energy · doi:10.1016/j.energy.2022.123973 · Cited by 351 · cited 1×
“Ma et al. developed a novel SOH estimation method based on LSTM [207].”
MethodWei, Z., Zhao, J., He, H., Ding, G., Cui, H., & Liu, L. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229462 · Cited by 348 · cited 1×
“The selected wavelength of the reflected signal is defined as where n eff is the effective core index of refraction and Λ is the Bragg grating period [116].”
BackgroundA naive Bayes model for robust remaining useful life prediction of lithium-ion battery
Ng, S. S. Y., Xing, Y., & Tsui, K. L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.020 · Cited by 345 · cited 1×
“…it facilitates more efficient training and inference processes. al. proposed a naïve Bayes model for estimating the battery’s RUL using Selina S.Y. constant Ng et al. proposed a naïve Bayes model for estimating the battery’s RUL using constant discharge data [165]. discharge data [165].”
MethodCalendar aging of silicon-containing batteries
McBrayer, J. D., Rodrigues, M.-T. F., Schulze, M. C., Abraham, D. P., Apblett, C. A., Bloom, I., Carroll, G. M., Colclasure, A. M., Fang, C., Harrison, K. L., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00883-w · Cited by 342 · cited 1×
“…rate and the different phase transition properties of the electrode materials both have a strong impact on the number of identifiable peaks. electrode materials both have a strong impact on the number of identifiable peaks transition properties of the electrode materials but also on the [81,82].”
BackgroundA fast estimation algorithm for lithium-ion battery state of health
Tang, X., Zou, C., Yao, K., Chen, G., Liu, B., He, Z., & Gao, F. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.06.036 · Cited by 336
Weng, C., Feng, X., Sun, J., & Peng, H. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.126 · Cited by 324 · cited 1×
“By transforming the voltage plateau of the OCV-SOC curve into clearly identifiable peaks and valleys in the first-order differential curve, ICA and DVA curves can detect a gradual change in battery behavior while aging [70,71].”
BackgroundLi, X., Yuan, C., & Wang, Z. (2020) · Energy · doi:10.1016/j.energy.2020.117852 · Cited by 321
Analysis of Lithium‐Ion Battery Models Based on Electrochemical Impedance Spectroscopy
Westerhoff, U., Kurbach, K., Lienesch, F., & Kurrat, M. (2016) · Energy Technology · doi:10.1002/ente.201600154 · Cited by 316 · cited 1×
“The distribution of relaxation times (DRT) analysis method is introduced to distinguish the main time constants of electrochemical processes [51–53], offering an intuitive description of the complicated properties using multiple RC (Resistor Capacitor) networks [54].”
MethodZhu, J., Dewi Darma, M. S., Knapp, M., Sørensen, D. R., Heere, M., Fang, Q., Wang, X., Dai, H., Mereacre, L., Senyshyn, A., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227575 · Cited by 313
Hu, C., Jain, G., Zhang, P., Schmidt, C., Gomadam, P., & Gorka, T. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.077 · Cited by 302 · cited 1×
“Hu et al. develop a non-linear kernel regression model based on the kNN regression, which manages to capture the dependence of the capacity on the selected features [196].”
MethodHsieh, A. G., Bhadra, S., Hertzberg, B. J., Gjeltema, P. J., Goy, A., Fleischer, J. W., & Steingart, D. A. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00111k · Cited by 293 · cited 1×
“Hsieh et al. conducted a comprehensive study using commercial batteries such as 18,650 Li-ion and alkaline LR6 (AA) batteries to verify the correlation of changes in sound speed with the state of charge and aging [106].”
BackgroundPotential for widespread electrification of personal vehicle travel in the United States
Needell, Z. A., McNerney, J., Chang, M. T., & Trancik, J. E. (2016) · Nature Energy · doi:10.1038/nenergy.2016.112 · Cited by 287
Xiong, R., Tian, J., Mu, H., & Wang, C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.05.124 · Cited by 283 · cited 1×
“Electrochemical Impedance Spectroscopy (EIS) is a high-precision impedance measurement technique [35–37].”
BackgroundChen, Z., Mi, C. C., Fu, Y., Xu, J., & Gong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.158 · Cited by 279
State of health and charge measurements in lithium-ion batteries using mechanical stress
Cannarella, J., & Arnold, C. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.003 · Cited by 278 · cited 1×
“Several other indirect assessment techniques have also been developed, such as the parity relation technique and mechanical stress method for SOH estimation [128,129].”
MethodShe, C., Wang, Z., Sun, F., Liu, P., & Zhang, L. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2951843 · Cited by 278 · cited 2×
“Wang et al. designed a radial basis function neural network (RBFNN) to predict IC peak value utilizing numerous indirect data such as mileage, average charge current, charge initial SOC, and average discharge temperature [94].”
MethodSelf-citationYang, N., Song, Z., Hofmann, H., & Sun, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2021.103857 · Cited by 276 · cited 1×
“Yang et al. used two convolutional neural networks to extract indicators for SOH and SOH variation between two consecutive charge/discharge cycles [180].”
Dubarry, M., Truchot, C., Liaw, B. Y., Gering, K., Sazhin, S., Jamison, D., & Michelbacher, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.078 · Cited by 265 · cited 2×
“In addition, the In addition, the ICA technique could diagnose capacity loss due to undercharge (UD) and under discharge (UC) [18,78].”
MethodOn-board state of health estimation of LiFePO4 battery pack through differential voltage analysis
Wang, L., Pan, C., Liu, L., Cheng, Y., & Zhao, X. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.01.125 · Cited by 265 · cited 1×
“Wang et al. used an improved center least squares method to smooth the DV curves and then select the characteristic peaks that drift significantly with battery aging for SOH estimation [97].”
MethodReconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy
Zhang, Y., Chen, Y., Yan, M., & Chen, F. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.107 · Cited by 260 · cited 1×
“The solution of the DRT is mainly derived from Tikhonov regression, also known as ridge regression [52,55,56].”
MethodLiu, J., Duan, Q., Ma, M., Zhao, C., Sun, J., & Wang, Q. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227263 · Cited by 257 · cited 2×
“Moreover, the fitted parameters can represent some aging mechanisms, which cover loss of active loss) [46– 48]. data and a typical .”
BackgroundZhang, L., Mu, Z., & Sun, C. (2018) · IEEE Access · doi:10.1109/access.2018.2816684 · Cited by 252 · cited 1×
“…model and particle filter The The nonlinear least squares technique was used to exponentially quantify the capacity degradation data of Lithium-ion batteries [135]. nonlinear least squares technique was used to exponentially quantify the capacity degradation data of Lithium-ion batteries [135].”
MethodSelf-citationLai, X., Huang, Y., Gu, H., Deng, C., Han, X., Feng, X., & Zheng, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.010 · Cited by 252 · cited 1×
“Additionally, the long-term prediction of performance degradation and remaining useful life (RUL) is highly desirable to guide the management, maintenance, and recycling of the battery throughout its full lifecycle [10,11].”
BackgroundDubarry, M., Truchot, C., Cugnet, M., Liaw, B. Y., Gering, K., Sazhin, S., Jamison, D., & Michelbacher, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.077 · Cited by 245
A Review of Lithium-Ion Battery State of Health Estimation and Prediction Methods
Yao, L., Xu, S., Tang, A., Zhou, F., Hou, J., Xiao, Y., & Fu, Z. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12030113 · Cited by 237 · cited 2×
“Compared with integer-order ECMs, models (FOM) can better describe the battery’s diffusion behavior [44,45 Various types of equivalent circuit models ECMs have been developed to simulate the battery’s EIS equivalent circuit model.”
MethodOnline Measurement of Battery Impedance Using Motor Controller Excitation
Howey, D. A., Mitcheson, P. D., Yufit, V., Offer, G. J., & Brandon, N. P. (2014) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2293597 · Cited by 235 · cited 1×
“Howey et al. presented a fast and cost-effective method for online battery impedance measurement using onboard power electronics as the excitation source [59].”
MethodMulti-time-scale observer design for state-of-charge and state-of-health of a lithium-ion battery
Zou, C., Manzie, C., Nešić, D., & Kallapur, A. G. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.040 · Cited by 235 · cited 1×
“Zou et al. developed nonlinear observers that incorporate fast and slow gains for the estimation of state variables related to fast and slow dynamics, specifically the Li-ion concentration in solid particles, Li-ion concentration in the electrolyte, and volume-averaged concentration flux [156].”
BackgroundModel based identification of aging parameters in lithium ion batteries
Prasad, G. K., & Rahn, C. D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.041 · Cited by 234
Gomez, J., Nelson, R., Kalu, E. E., Weatherspoon, M. H., & Zheng, J. P. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.107 · Cited by 232 · cited 1×
“Based on the different theories of model construction and principles of state prediction algorithms, they can be divided into three categories: empirical models [130], equivalent circuit models [131,132], and electrochemical models based on physical chemistry [133,134].”
MethodFly, A., & Chen, R. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101329 · Cited by 229 · cited 1×
“…rate and the different phase transition properties of the electrode materials both have a strong impact on the number of identifiable peaks. electrode materials both have a strong impact on the number of identifiable peaks transition properties of the electrode materials but also on the [81,82].”
BackgroundImpedance-based forecasting of lithium-ion battery performance amid uneven usage
Jones, P. K., Stimming, U., & Lee, A. A. (2022) · Nature Communications · doi:10.1038/s41467-022-32422-w · Cited by 227 · cited 2×
“5 of 37 The fundamental behind EIS is the identification of different reaction rates in the electrochemical process through their corresponding frequency characteristics when alternating signals are applied [38].”
BackgroundMethodLin, M., Wu, D., Meng, J., Wu, J., & Wu, H. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230774 · Cited by 223 · cited 1×
“Lin et al. apply RF for a multi-model fusion strategy, to obtain high accuracy and robustness estimation [181].”
BackgroundGold, L., Bach, T., Virsik, W., Schmitt, A., Müller, J., Staab, T. E. M., & Sextl, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.090 · Cited by 222 · cited 3×
“To investigate these regimes, the ultrasonic signals during the charging and discharging cycles are monitored and analyzed in the time or frequency domain, which provides indicators of battery aging, safety, and small defects [100,101].”
BackgroundAlbero Blanquer, L., Marchini, F., Seitz, J. R., Daher, N., Bétermier, F., Huang, J., Gervillié, C., & Tarascon, J.-M. (2022) · Nature Communications · doi:10.1038/s41467-022-28792-w · Cited by 222 · cited 1×
“OFS are non-electrical and immune to electromagnetic interference [112,113].”
BackgroundExtension of physics-based single particle model for higher charge–discharge rates
Khaleghi Rahimian, S., Rayman, S., & White, R. E. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.084 · Cited by 221 · cited 1×
“In the SPM, the anode and cathode are each modeled as a single particle by neglecting the spatial dependence of the current density within the electrode [161–163].”
MethodDavies, G., Knehr, K. W., Van Tassell, B., Hodson, T., Biswas, S., Hsieh, A. G., & Steingart, D. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1411712jes · Cited by 221 · cited 1×
“Davies et al. demonstrated that acoustic analysis of the through-thickness bulk wave could be used to estimate SOC [107].”
MethodInternal strain and temperature discrimination with optical fiber hybrid sensors in Li-ion batteries
Nascimento, M., Novais, S., Ding, M. S., Ferreira, M. S., Koch, S., Passerini, S., & Pinto, J. L. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.096 · Cited by 220 · cited 1×
“In the follow-up work, a hybrid sensing network consisting of fiber Bragg gratings and Fabry–Perot cavities was proposed [120].”
BackgroundLadpli, P., Kopsaftopoulos, F., & Chang, F.-K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.056 · Cited by 214 · cited 1×
“Ladpli et al. developed a technique based on built-in ultrasound-guided waves to monitor lithium-ion batteries’ state [109].”
MethodBerecibar, M., Garmendia, M., Gandiaga, I., Crego, J., & Villarreal, I. (2016) · Energy · doi:10.1016/j.energy.2016.02.163 · Cited by 213 · cited 2×
“Berecibar et al. explained the correlation between capacity decay and DV characteristic peak [71].”
BackgroundBattery health prediction under generalized conditions using a Gaussian process transition model
Richardson, R. R., Osborne, M. A., & Howey, D. A. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.03.022 · Cited by 212 · cited 1×
“In the follow-up work [173], they proposed using a GPR conversion model to establish the relationship between current, voltage, temperature, and capacity.”
MethodA Fast Impedance Calculation-Based Battery State-of-Health Estimation Method
Fu, Y., Xu, J., Shi, M., & Mei, X. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3097668 · Cited by 209 · cited 1×
“Fu et al. investigated the validity of various frequency regions and implemented a real-time, fast acquisition of EIS utilizing the Fast Fourier Transform (FFT) technique [64].”
MethodLi, W., Demir, I., Cao, D., Jöst, D., Ringbeck, F., Junker, M., & Sauer, D. U. (2022) · Energy Storage Materials · doi:10.1016/j.ensm.2021.10.023 · Cited by 206 · cited 1×
“Li et al. developed a framework for the identification of physical parameters of electrochemical models based on the cuckoo search algorithm [154].”
MethodLi, Y., Li, K., Liu, X., Li, X., Zhang, L., Rente, B., Sun, T., & Grattan, K. T. V. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119787 · Cited by 205 · cited 1×
“…the automatic extraction (AE) method to extract features from the measurements of FBG sensors and then used Gaussian process regression combined with a convolutional neural network to develop a multivariate regression model to predict battery capacity and quantify the prediction uncertainty [126].”
MethodSelf-citationXiong, R., He, H., Sun, F., Liu, X., & Liu, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.003 · Cited by 204 · cited 1×
“Based on the different theories of model construction and principles of state prediction algorithms, they can be divided into three categories: empirical models [130], equivalent circuit models [131,132], and electrochemical models based on physical chemistry [133,134].”
MethodSelf-citationRaghavan, A., Kiesel, P., Sommer, L. W., Schwartz, J., Lochbaum, A., Hegyi, A., Schuh, A., Arakaki, K., Saha, B., Ganguli, A., et al. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.104 · Cited by 203 · cited 1×
“Based on the previous work, Ganguli et al. discussed the details of the method for separating the strain and temperature signals of the interlayer and used extended Kalman filtering (EKF) and dynamic time warping for battery SOC and SOH estimation [124,125].”
MethodLiu, B., Tang, X., & Gao, F. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136098 · Cited by 199 · cited 1×
“Liu et al. developed a simplified P2D model through Parabolic Profile (PP) approximation method and volume integration [139].”
MethodLyu, C., Lai, Q., Ge, T., Yu, H., Wang, L., & Ma, N. (2017) · Energy · doi:10.1016/j.energy.2016.12.004 · Cited by 194
Self-citationBattery management strategies: An essential review for battery state of health monitoring techniques
Pradhan, S. K., & Chakraborty, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104427 · Cited by 194 · cited 1×
“Given the abundant parameters and noticeable environmental variations in electro-chemical models, it becomes imperative to employ online parameter updating methodologies [155–158].”
MethodLewerenz, M., Marongiu, A., Warnecke, A., & Sauer, D. U. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.059 · Cited by 188 · cited 2×
“Incremental capacity analysis (ICA) and differential voltage analysis (DVA) are established techniques to qualitatively identify the major degradation modes [18,66].”
BackgroundMethodDifferential voltage analyses of high-power lithium-ion cells. 4. Cells containing NMC
Bloom, I., Walker, L. K., Basco, J. K., Abraham, D. P., Christophersen, J. P., & Ho, C. D. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.019 · Cited by 185 · cited 1×
“In their later work [89], the LiNi 1–x–y Mn y Co x O 2 (NMC) electrode was tested using the same method, and the results suggest that the side reactions which consume recyclable lithium occur mainly at the negative electrode.”
MethodWei, Y., & Wu, D. (2023) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108947 · Cited by 179 · cited 1×
“The experimental results demonstrated that the method exhibits improved accuracy compared to LSTM and GPR methods [221].”
MethodImplementation for a cloud battery management system based on the CHAIN framework
Yang, S., Zhang, Z., Cao, R., Wang, M., Cheng, H., Zhang, L., Jiang, Y., Li, Y., Chen, B., Ling, H., et al. (2021) · Energy and AI · doi:10.1016/j.egyai.2021.100088 · Cited by 178 · cited 2×
“…the architecture of end-side cloud collaboration has become the solution for intelligent, informative, networked and Internet-oriented BMS [239], which aims to enhance real-time performance and support decision-making of BMS. Digital twin technology, which connects the physical and…”
BackgroundSelf-citationAn Integrated Probabilistic Approach to Lithium-Ion Battery Remaining Useful Life Estimation
Liu, D., Xie, W., Liao, H., & Peng, Y. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2014.2348613 · Cited by 170 · cited 1×
“In addition to the probabilistic models mentioned above, Bayesian methods have been applied to Bootstrap estimation [182], Autoregressive Integrated Moving Average model (ARIMA) [164], Deep Belief Networks (DBN) [183], and ANN [184,185] for SOH estimation.”
MethodA review on the state of health estimation methods of lead-acid batteries
Jiang, S., & Song, Z. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230710 · Cited by 166 · cited 2×
“While these models can be useful for making predictions, they are ultimately only approximate representations of the cell’s true behavior [140].”
BackgroundCycling degradation testing and analysis of a LiFePO4 battery at actual conditions
Panchal, S., Mcgrory, J., Kong, J., Fraser, R., Fowler, M., Dincer, I., & Agelin-Chaab, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3837 · Cited by 164 · cited 1×
“Based on the different theories of model construction and principles of state prediction algorithms, they can be divided into three categories: empirical models [130], equivalent circuit models [131,132], and electrochemical models based on physical chemistry [133,134].”
MethodGanguli, A., Saha, B., Raghavan, A., Kiesel, P., Arakaki, K., Schuh, A., Schwartz, J., Hegyi, A., Sommer, L. W., Lochbaum, A., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.103 · Cited by 161 · cited 1×
“Based on the previous work, Ganguli et al. discussed the details of the method for separating the strain and temperature signals of the interlayer and used extended Kalman filtering (EKF) and dynamic time warping for battery SOC and SOH estimation [124,125].”
MethodWang, F., Amogne, Z. E., Chou, J., & Tseng, C. (2022) · Energy · doi:10.1016/j.energy.2022.124344 · Cited by 161
Nascimento, M., Ferreira, M. S., & Pinto, J. L. (2017) · Measurement · doi:10.1016/j.measurement.2017.07.049 · Cited by 158
Gou, B., Xu, Y., & Feng, X. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3029295 · Cited by 158 · cited 2×
“[222,223 construct a multi-model fusion approach for battery accuracy compared to single standalone models to reduce variance and improve stability through other hand, the Boosting ensemble learning the training of multiple recursive weak classifiers weighting to form a strong classifier.”
MethodCapacity attenuation mechanism modeling and health assessment of lithium-ion batteries
Tian, J., Xu, R., Wang, Y., & Chen, Z. (2021) · Energy · doi:10.1016/j.energy.2020.119682 · Cited by 157 · cited 2×
“There are three direct indexes to characterize battery aging behavior, including changes in capacity, internal resistance, and impedance [23,24]. in capacity, internal resistance, and impedance [23,24].”
BackgroundYang, S., He, R., Zhang, Z., Cao, Y., Gao, X., & Liu, X. (2020) · Matter · doi:10.1016/j.matt.2020.04.015 · Cited by 156 · cited 1×
“In our previous work, CHAIN (Cyber Hierarchy and Interactional Network) has been proposed to support the interconnection and coordination of devices, services, and systems through a multidimensional hierarchy [240].”
MethodSelf-citationModeling the performance of rechargeable lithium-based cells: design correlations for limiting cases
Doyle, M., & Newman, J. (1995) · Journal of Power Sources · doi:10.1016/0378-7753(94)02038-5 · Cited by 155 · cited 1×
“The majority of electrochemical models for lithium-ion batteries are based on the work of John Newman and his colleagues [145,146].”
BackgroundBao, X., Chen, L., Lopes, A. M., Li, X., Xie, S., Li, P., & Chen, Y. (2023) · Energy · doi:10.1016/j.energy.2023.127734 · Cited by 153 · cited 1×
“Bao et al. proposed a CNN-VLSTM-DA model for estimating SOH [200].”
MethodLi, X., Yuan, C., Wang, Z., He, J., & Yu, S. (2022) · eTransportation · doi:10.1016/j.etran.2022.100156 · Cited by 152 · cited 1×
“Li et al. developed a flexible state space model for estimating the SOH of a battery based on the GPR algorithm [174].”
MethodLewerenz, M., Fuchs, G., Becker, L., & Sauer, D. U. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.04.029 · Cited by 151 · cited 1×
“As the battery ages, all peaks on the DV curves shift toward a lower depth of discharge (DOD), and the amplitude of peaks may increase due to the homogeneity of lithium distribution increasing [66,87].”
BackgroundTang, X., Zou, C., Yao, K., Lu, J., Xia, Y., & Gao, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113591 · Cited by 150 · cited 1×
“Tang et al. solved the battery state estimation problem using model migration techniques [176].”
MethodToughzaoui, Y., Bamati, S., Chaoui, H., Louahlia, H., Petrone, R., Masson, S. L., & Gualous, H. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104520 · Cited by 148
Qiao, D., Wang, X., Lai, X., Zheng, Y., Wei, X., & Dai, H. (2021) · Energy · doi:10.1016/j.energy.2021.123082 · Cited by 145 · cited 1×
“The concept of ICA was first proposed for the study of the electrochemical reactivity of manganese dioxide. as ∆ Q/ ∆ V within a fixed time or voltage interval [75].”
BackgroundGoutam, S., Timmermans, J.-M., Omar, N., den Bossche, P. V., & Mierlo, J. V. (2015) · Energies · doi:10.3390/en8088175 · Cited by 141 · cited 1×
“Among OFS, fiber Bragg grating is superior in monitoring the surface temperature and strain of a cell [114,115].”
BackgroundBurow, D., Sergeeva, K., Calles, S., Schorb, K., Börger, A., Roth, C., & Heitjans, P. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.01.033 · Cited by 141 · cited 1×
“A higher peak on the DV curve implies higher lithium loss in localized areas of the electrode, which might be caused by SEI growth or material-induced uneven current density distribution [84,85].”
BackgroundPaul, T., Chi, P. W., Wu, P. M., & Wu, M. (2021) · Scientific Reports · doi:10.1038/s41598-021-91871-3 · Cited by 138 · cited 1×
“The solution of the DRT is mainly derived from Tikhonov regression, also known as ridge regression [52,55,56].”
MethodMa, Y., Yao, M., Liu, H., & Tang, Z. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104750 · Cited by 136 · cited 1×
“All four of these models have been successfully applied to SOH prediction [197–199].”
MethodA novel graph-based framework for state of health prediction of lithium-ion battery
Yao, X., Chen, G., PECHT, M. G., & Chen, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106437 · Cited by 134 · cited 1×
“The follow-up work [233] indicated that in the CL-Graphsage (CNN-LSTM-Graphsage) framework, LSTM is used to extract temporal features, and Graphsage is used to obtain spatial features.”
MethodA review on various optical fibre sensing methods for batteries
Han, G., Yan, J., Guo, Z., Greenwood, D. G., Marco, J., & Yu, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111514 · Cited by 132 · cited 1×
“Among OFS, fiber Bragg grating is superior in monitoring the surface temperature and strain of a cell [114,115].”
BackgroundMa, B., Yang, S., Zhang, L., Wang, W., Chen, S., Yang, X., Xie, H., Yu, H., Wang, H., & Liu, X. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232030 · Cited by 130
Self-citationUltrasonic Health Monitoring of Lithium-Ion Batteries
Wu, Y., Wang, Y., Yung, W. K. C., & Pecht, M. (2019) · Electronics · doi:10.3390/electronics8070751 · Cited by 128 · cited 1×
“Thus, the application of using ultrasonic signals to monitor battery SOH should be performed in a fully charged state in order to characterize the degradation of maximum capacity [100,105,111].”
Comparing the levelized cost of electric vehicle charging options in Europe
Lanz, L., Noll, B., Schmidt, T. S., & Steffen, B. (2022) · Nature Communications · doi:10.1038/s41467-022-32835-7 · Cited by 127 · cited 1×
“In an effort to combat the harmful effects of climate change and transition to a more sustainable future, achieving carbon neutrality has gained widespread acceptance across the globe [1–4].”
BackgroundDynamic Bayesian Network-Based Lithium-Ion Battery Health Prognosis for Electric Vehicles
Dong, G., Han, W., & Wang, Y. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3034855 · Cited by 121 · cited 1×
“Researchers have successfully utilized DBN to estimate SOH and predict RUL in the absence of features [227,228].”
MethodLi, X., Ahmadi, M., Collins, L. F., & Kalinin, S. V. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.05.010 · Cited by 119 · cited 1×
“The solution of the DRT is mainly derived from Tikhonov regression, also known as ridge regression [52,55,56].”
MethodWei, M., Gu, H., Ye, M., Wang, Q., Xu, X., & Wu, C. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.05.019 · Cited by 116 · cited 1×
“In addition to the probabilistic models mentioned above, Bayesian methods have been applied to Bootstrap estimation [182], Autoregressive Integrated Moving Average model (ARIMA) [164], Deep Belief Networks (DBN) [183], and ANN [184,185] for SOH estimation.”
MethodData-driven planning of distributed energy resources amidst socio-technical complexities
Jain, R. K., Qin, J., & Rajagopal, R. (2017) · Nature Energy · doi:10.1038/nenergy.2017.112 · Cited by 115 · cited 1×
“Due to their intermittent nature, energy storage devices are critical to bridging the gap between energy production and consumption [5,6].”
BackgroundMatadi, B. P., Géniès, S., Delaille, A., Waldmann, T., Kasper, M., Wohlfahrt‐Mehrens, M., Aguesse, F., Bekaert, É., Gordon, I. J., Daniel, L., et al. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0631706jes · Cited by 114 · cited 1×
“A higher peak on the DV curve implies higher lithium loss in localized areas of the electrode, which might be caused by SEI growth or material-induced uneven current density distribution [84,85].”
BackgroundSpatially resolved ultrasound diagnostics of Li-ion battery electrodes
Robinson, J. B., Maier, M., Alster, G., Compton, T., Brett, D. J. L., & Shearing, P. R. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp07098a · Cited by 113 · cited 1×
“Recently, ultrasonic time of flight (TOF) has emerged as a relatively new method for interrogating battery behavior [102–104].”
MethodOnline diagnosis of state of health for lithium-ion batteries based on short-term charging profiles
Shu, X., Li, G., Zhang, Y., Shen, J., Chen, Z., & Liu, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228478 · Cited by 112 · cited 1×
“Xing Shu et al. applied a hybrid kernel function-based support vector machine with fixed-size least squares to study the correlation between SOH and feature variables [192].”
MethodMa, Z., Jiang, J., Shi, W., Zhang, W., & Mi, C. C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.006 · Cited by 111 · cited 1×
“The integral curves suggests the capacity This technique was then expanded to identify the battery aging mechanism under different conditions [72–74]. of the battery in the corresponding voltage peaks reflect the different phase transition IC curve is calculated as ∆ Q/ ∆ V within a fixed time or…”
BackgroundHealth indicator for machine condition monitoring built in the latent space of a deep autoencoder
González, A., Díaz, I., Cuadrado, A. A., & García-Pérez, D. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108482 · Cited by 111 · cited 1×
“AE is a useful tool for recognizing and tracking characteristics of battery aging and is capable of handling the varied and inconsistent nature of battery decay and capacity loss [209,210].”
MethodTang, X., Zhou, Y., Gao, F., & Lai, X. (2022) · eTransportation · doi:10.1016/j.etran.2022.100213 · Cited by 110 · cited 1×
“Therefore, some researchers have also employed the calculation of SOH by integrating current over a period of time and dividing it by the difference in SOC multiplied by the rated capacity of the battery [28].”
BackgroundWang, X., Wei, X., Chen, Q., & Dai, H. (2021) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3001841 · Cited by 107 · cited 1×
“Wang et al. designed and verified an impedance measuring system combined with a high-power dual active bridge (DAB) converter and distributed sampling units, which realized a low-cost onboard battery impedance measuring system [60].”
BackgroundJiang, Y., Chen, Y., Yang, F., & Peng, W. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232466 · Cited by 107 · cited 1×
“Jiang et al. utilized a convolutional auto-encoder (CAE) to extract features from raw battery cycle data and introduced a self-attentive machine (SA) mechanism for SOH estimation [212].”
BackgroundStetzel, K. D., Aldrich, L. L., Trimboli, M. S., & Plett, G. L. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.135 · Cited by 106 · cited 1×
“Given the abundant parameters and noticeable environmental variations in electro-chemical models, it becomes imperative to employ online parameter updating methodologies [155–158].”
MethodLiu, X., Zhang, L., Yu, H., Wang, J., Li, J., Yang, K., Zhao, Y., Wang, H., Wu, B., Brandon, N. P., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200889 · Cited by 104 · cited 1×
“Through the use of advanced characterization techniques in various types of batteries (e.g., scanning electron microscope, Atomic Force Microscope, X-ray computed tomography, etc.) [16] more comprehensive understanding of the aging process in various types of batteries has been developed [17].”
MethodSelf-citationChen, L., Zhang, M., Ding, Y., Wu, S., Li, Y., Liang, G., Li, H., & Pan, H. (2021) · Energy Reports · doi:10.1016/j.egyr.2021.05.027 · Cited by 103 · cited 1×
“Hybrid Pulse Power Characterization (HPPC) is the commonly accepted test for ohmic resistance analysis [30].”
BackgroundLi, J., Wang, D., Deng, L., Cui, Z., Lyu, C., Wang, L., & Pecht, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101538 · Cited by 99 · cited 1×
“The solid-state diffusion coefficient and diffusion time have been identified and verified in the literature as excellent indicators of SOH, which increase monotonically with cell aging [150,151].”
BackgroundGao, X., Liu, X., He, R., Wang, M., Xie, W., Brandon, N. P., Wu, B., Ling, H., & Yang, S. (2021) · Energy storage materials · doi:10.1016/j.ensm.2021.01.007 · Cited by 99 · cited 1×
“The unique hierarchical network architecture of CHAIN integrates the multi-scale battery material design [241], multi-dimensional battery system design, and multi-layer end-cloud collaboration.”
BackgroundSelf-citationFath, J. P., Dragicevic, D., Bittel, L., Nuhic, A., Sieg, J., Hahn, S. L., Alsheimer, L., Spier, B., & Wetzel, T. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100813 · Cited by 98 · cited 1×
“It is speculated the shortening of the distance between the two peaks is caused by the degradation of the carbon electrode [86].”
BackgroundLewerenz, M., & Sauer, D. U. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.06.003 · Cited by 97 · cited 1×
“By measuring the distance between the peaks, capacity loss can be obtained [83].”
BackgroundZhou, Y. H., Dong, G., Tan, Q., Han, X., Chen, C., & Wei, J. (2022) · Energy · doi:10.1016/j.energy.2022.125514 · Cited by 96
Li, W., Lutz, D. M., Wang, L., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2020) · Joule · doi:10.1016/j.joule.2020.11.003 · Cited by 94 · cited 2×
“…analysis method is introduced to distinguish the main time constants of electrochemical processes [51–53], offering an intuitive description of Apart from the frequency domain method, the time domain analysis of EIS data is also suitable for decomposing kinetic processes inside the cells [49,50].”
MethodIdentifying Defects in Li-Ion Cells Using Ultrasound Acoustic Measurements
Robinson, J. B., Owen, R. E., Kok, M. D. R., Maier, M., Majasan, J. O., Braglia, M., Stocker, R., Amietszajew, T., Roberts, A. J., Bhagat, R., et al. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abb174 · Cited by 92 · cited 2×
“To investigate these regimes, the ultrasonic signals during the charging and discharging cycles are monitored and analyzed in the time or frequency domain, which provides indicators of battery aging, safety, and small defects [100,101].”
BackgroundZhang, Q., Wang, D., Schaltz, E., Stroe, D., Gismero, A., & Yang, B. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105386 · Cited by 91 · cited 1×
“Zhang et al. utilized the DRT method and low-frequency impedance fitting to extract the parameters, Pearson correlation analysis to filter the parameters, and the Gaussian process regression method to establish the staged SOH estimation model [65].”
MethodLithium-ion battery temperature on-line estimation based on fast impedance calculation
Wang, X., Wei, X., Chen, Q., Zhu, J., & Dai, H. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.100952 · Cited by 89 · cited 3×
“AC impedance analysis [39,42 transform provides a better time-frequency resolution and is well-suited Next, Fourier transform analysis is usually performed for the decomposition of the measured AC signal into its individual frequency component.”
BackgroundMethodWang, Y., Marchetti, B., & Zhou, X. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.08.093 · Cited by 89 · cited 2×
“The distribution of relaxation times (DRT) analysis method is introduced to distinguish the main time constants of electrochemical processes [51–53], offering an intuitive description of the complicated properties using multiple RC (Resistor Capacitor) networks [54].”
MethodKatrašnik, T., Mele, I., & Zelič, K. (2021) · Energy Conversion and Management · doi:10.1016/j.enconman.2021.114036 · Cited by 86 · cited 1×
“…model, including SEI formation, SEI decomposition, Lithium reaction with electrolyte at anode interface, lithium plating, Cathode active material degradation, electrolyte decomposition, heat generation resulting from Li+ transport, and heat generation stemming from side reactions [153].”
MethodLithium‐ion battery SOC/SOH adaptive estimation via simplified single particle model
Cen, Z., & Kubiak, P. (2020) · International Journal of Energy Research · doi:10.1002/er.5374 · Cited by 85
Impedance-based capacity estimation for lithium-ion batteries using generative adversarial network
Kim, S., Choi, Y. Y., & Choi, J.-I. (2022) · Applied Energy · doi:10.1016/j.apenergy.2021.118317 · Cited by 84 · cited 1×
“Kim et al. proposed a completely unsupervised approach to SOH monitoring using the information maximization generative adversarial network (InfoGAN) to extract features from EIS data and estimate battery capacity using Gaussian process regression [219].”
MethodPerspective on Mechanistic Modeling of Li-Ion Batteries
Dubarry, M., & Beck, D. (2022) · Accounts of Materials Research · doi:10.1021/accountsmr.2c00082 · Cited by 84
Chen, H., Zhang, T., Gao, Q., Han, Z., Jin, Y., Li, L., Yang, K., Xu, Y., Liu, X., Xu, X., et al. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.134583 · Cited by 84 · cited 1×
“Additionally, the long-term prediction of performance degradation and remaining useful life (RUL) is highly desirable to guide the management, maintenance, and recycling of the battery throughout its full lifecycle [10,11].”
BackgroundSelf-citationBattery state-of-charge estimation using machine learning analysis of ultrasonic signatures
Galiounas, E., Tranter, T. G., Owen, R. E., Robinson, J. B., Shearing, P. R., & Brett, D. J. L. (2022) · Energy and AI · doi:10.1016/j.egyai.2022.100188 · Cited by 83 · cited 1×
“This is an intuitive, non-contact, non-destructive battery aging characterization technique [98,99].”
MethodOnline state-of-health estimation of lithium-ion batteries using Dynamic Bayesian Networks
He, Z., Gao, M., Ma, G., Liu, Y., & Chen, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.100 · Cited by 82 · cited 1×
“Researchers have successfully utilized DBN to estimate SOH and predict RUL in the absence of features [227,228].”
MethodBroadband Identification of Battery Electrical Impedance for HEVs
Al Nazer, R., Cattin, V., Granjon, P., Montaru, M., & Ranieri, M. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2013.2254140 · Cited by 80
Rente, B., Fabian, M., Vidakovic, M., Liu, X., Li, X., Li, K., Sun, T. S., & Grattan, K. T. V. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2020.3016080 · Cited by 80 · cited 1×
“Optical grating technology can also be applied for battery state prediction [121–123].”
BackgroundSelf-citationPeng, J., Jia, S., Yang, S., Kang, X., Yu, H., & Yang, Y. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.104950 · Cited by 80 · cited 1×
“Optical grating technology can also be applied for battery state prediction [121–123].”
BackgroundSelf-citationSemi-Empirical Capacity Fading Model for SoH Estimation of Li-Ion Batteries
Singh, P., Chen, C., Tan, C. M., & Huang, S.-C. (2019) · Applied Sciences · doi:10.3390/app9153012 · Cited by 79
Krupp, A., Ferg, E., Schuldt, F., Derendorf, K., & Agert, C. (2020) · Batteries · doi:10.3390/batteries7010002 · Cited by 79 · cited 2×
“3 [79].”
Haris, M., Hasan, M. N., & Qin, S. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116541 · Cited by 78 · cited 1×
“In addition to the probabilistic models mentioned above, Bayesian methods have been applied to Bootstrap estimation [182], Autoregressive Integrated Moving Average model (ARIMA) [164], Deep Belief Networks (DBN) [183], and ANN [184,185] for SOH estimation.”
MethodYuan, S., Jiang, L., Yin, C., Wu, H., & Zhang, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.060 · Cited by 75 · cited 1×
“Various reduced-order methods (such as Pad é approximation [160]) have been employed to approximate the solution of the solid-liquid phase diffusion equation in order to simplify the resolution of the partial differential equation within electrochemical models.”
MethodQin, P., Zhao, L., & Liu, Z. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103644 · Cited by 75 · cited 2×
“The addition of a small amount of classification and regression tree (Cart) for relearning enhanced the accuracy of the individual algorithms [237].”
BackgroundMethodRemaining useful life prediction for lithium-ion batteries based on an integrated health indicator
Sun, Y., Hao, X., Pecht, M., & Zhou, Y. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2018.07.047 · Cited by 71
Diagnosis of a battery energy storage system based on principal component analysis
Banguero, E., Correcher, A., Pérez-Navarro, Á., García, E., & Aristizábal, A. J. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.08.064 · Cited by 70 · cited 1×
“The model retained 80.25% 0.25% of the total variability and achieved rapid degradation diagnosis of the battery system [215].”
BackgroundInfluentialWang, X., Kou, Y., Wang, B., Jiang, Z., Wei, X., & Dai, H. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3153680 · Cited by 64 · cited 1×
“In order to reduce the cost of EIS applications and improve the accuracy of SOH estimation, there is a need to design integrated electrochemical analysis systems [57].”
BackgroundJin, H., Cui, N., Cai, L., Meng, J., Li, J., Peng, J., & Zhao, X. (2022) · Energy · doi:10.1016/j.energy.2022.125503 · Cited by 64
Zhou, L., Zhao, Y., Li, D., & Wang, Z. (2021) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2021.3129497 · Cited by 63 · cited 1×
“Zhou et al. proposed a new method for LiFePO 4 battery SOH estimation by combining incremental capacity analysis (ICA) and ohmic resistance, using support vector regression and recursive least-squares method [32].”
MethodZhao, J., Li, X., Yu, D., Jun, Z., & Wenjin, Z. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106319 · Cited by 63
Wavelet transformation to determine impedance spectra of lithium-ion rechargeable battery
Hoshi, Y., Yakabe, N., Isobe, K., Saito, T. I., Shitanda, I., & Itagaki, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.048 · Cited by 60 · cited 2×
“…EIS test usually covers a wide frequency span; therefore, in Wavelet transform is a suitable alternative method for AC impedance analysis [39,42,43]. resistance, parameters such as double-layer capacitance, charge transfer The wavelet transform provides a better time-frequency resolution and…”
MethodBattery state of health monitoring by estimation of the number of cyclable Li-ions
Zhou, X., Stein, J. L., & Ersal, T. (2017) · Control Engineering Practice · doi:10.1016/j.conengprac.2017.05.009 · Cited by 60
Buteau, S., & Dahn, J. R. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.1051908jes · Cited by 60 · cited 1×
“After obtaining the EIS measurement, HI features can be extracted for SOH estimation [61,62].”
MethodVerma, M. K. S., Basu, S., Patil, R. S., Hariharan, K. S., Adiga, S. P., Kolake, S. M., Oh, D., Song, T., & Sung, Y. (2020) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2020.2966266 · Cited by 60 · cited 1×
“The solid-state diffusion coefficient and diffusion time have been identified and verified in the literature as excellent indicators of SOH, which increase monotonically with cell aging [150,151].”
BackgroundHuo, Q. C., Ma, Z., Zhao, X., Zhang, T., & Zhang, Y. (2021) · IEEE Access · doi:10.1109/access.2021.3050557 · Cited by 60 · cited 1×
“Huo et al. proposed a method for estimating the SOH of a battery using a Bayesian network, which allows for the incorporation of the probabilistic nature of battery degradation [226].”
MethodGuo, J., Zhang, P., Wu, D., Liu, Z., Ge, H., Zhang, S., & Yang, X. (2021) · Sustainable Cities and Society · doi:10.1016/j.scs.2021.103330 · Cited by 60 · cited 1×
“Due to their intermittent nature, energy storage devices are critical to bridging the gap between energy production and consumption [5,6].”
BackgroundXu, Z., Guo, Y., & Saleh, J. H. (2022) · Neural Computing and Applications · doi:10.1007/s00521-022-07291-5 · Cited by 59 · cited 1×
“Xu et al. proposed a physics-informed dynamic deep autoencoder (PIDDA) for high-accuracy SOH prediction [213].”
BackgroundZhao, G., Zhang, C., Duan, B., Shang, Y., Kang, Y., & Zhu, R. (2023) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2022.3170630 · Cited by 58 · cited 1×
“A shallow layer-sharing mechanism between discriminators and regressors is developed to capture aging knowledge for regularization, along with a regression generative adversarial network (RGAN) scheme for SOH estimation based on the optimal correlation between SOH and features [218].”
MethodSelf-citationLithium Metal-Based Composite: An Emerging Material for Next-Generation Batteries
Huang, Y., Duan, J., Zheng, X., Wen, J., Dai, Y., Wang, Z., Luo, W. H., & Huang, Y. (2020) · Matter · doi:10.1016/j.matt.2020.07.005 · Cited by 56 · cited 1×
“Battery aging is one of the primary challenges hindering the widespread adoption of electric vehicles [7].”
BackgroundR‐Smith, N. A., Leitner, M., Alić, I., Toth, D. M., Kasper, M., Romio, M., Surace, Y., Jahn, M., Kienberger, F., Ebner, A., et al. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230459 · Cited by 55 · cited 1×
“Through the use of advanced characterization techniques in various types of batteries (e.g., scanning electron microscope, Atomic Force Microscope, X-ray computed tomography, etc.) [16] more comprehensive understanding of the aging process in various types of batteries has been developed [17].”
MethodLin, C. P., Cabrera, J., Yu, D. Y. W., Yang, F., & Tsui, K. L. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8f56 · Cited by 51 · cited 1×
“The common pre-processing methods include smoothing splines, peak fitting functions, voltage window filter, Gaussian filter, Butterworth filter, Kalman filter, and moving average filter [91–94].”
MethodUltrasonic monitoring performance degradation of lithium ion battery
Kim, J., Jo, J.-H., & Byeon, J.-W. (2020) · Microelectronics Reliability · doi:10.1016/j.microrel.2020.113859 · Cited by 51 · cited 1×
“This is an intuitive, non-contact, non-destructive battery aging characterization technique [98,99].”
MethodState of health estimation of lithium-ion batteries using Autoencoders and Ensemble Learning
Wu, J., Chen, J., Xiong, F., Xiang, H., & Zhu, Q. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.105708 · Cited by 49 · cited 1×
“Wu et al. developed a combined convolutional auto-encoder (CAE) and recursive auto-encoder (RAE) framework to extract health features from voltage and temperature profiles undercharging and used the AdaBoost, an Ensemble learning method, to construct SOH estimation models [211].”
MethodLi, W., Huang, Q., Yang, C. P., Chen, J., Tang, Z., Zhang, F., Li, A., Zhang, L., & Zhang, J. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2019.134760 · Cited by 47 · cited 1×
“AC impedance analysis [39,42 transform provides a better time-frequency resolution and is well-suited Next, Fourier transform analysis is usually performed for the decomposition of the measured AC signal into its individual frequency component.”
BackgroundSelf-citation
Research works printed but not linked: 3
- Divakar, B.P., Cheng, K.W.E., Wu, H.J., Xu, J., Ma, H.B., Ting, W., Ding, K., Choi, W.F., Huang, B.F., and Leung, C.H. (2009, January 1). Battery Management System and Control Strategy for Hybrid and Electric Vehicle. Proceedings of the 2009 3rd International Conference on Power Electronics Systems and Applications (PESA), Hong Kong, China.
- Sood, B., Osterman, M., and Pecht, M. (2013, January 7–9). Product Safety Engineering Society. Annual IEEE Computer Conference. Proceedings of the Annual IEEE Symposium on Product Compliance Engineering (ISPCE), Austin, TE, USA.
- Vapnik, V. (1998). Nonlinear Modeling, Springer.
Cited by
State of Health (SoH) estimation methods for second life lithium-ion battery—Review and challenges
S, V., Che, H. S., Selvaraj, J., Tey, K. S., Lee, J. W., Shareef, H., & Errouissi, R. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.123542 · Cited by 190
Battery Energy Storage Systems: A Review of Energy Management Systems and Health Metrics
Nazaralizadeh, S., Banerjee, P., Srivastava, A. K., & Famouri, P. F. (2024) · Energies · doi:10.3390/en17051250 · Cited by 198
“Methods related to data-driven and cloud computing frameworks for battery SOH estimation are proposed in [22].”
MethodPhysics-Informed Neural Networks for State of Health Estimation in Lithium-Ion Batteries
Hofmann, T., Hamar, J., Rogge, M., Zoerr, C., Erhard, S., & Philipp Schmidt, J. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acf0ef · Cited by 106
Mousaei, A., Naderi, Y., & Bayram, I. S. (2024) · IEEE Access · doi:10.1109/access.2024.3378527 · Cited by 130
“Additionally, reference [137] elaborate on the importance of measurements obtained from EVs through on-board diagnostics.”
BackgroundPowering the Future: A Comprehensive Review of Battery Energy Storage Systems
Rey, S. O., Romero, J. A., Trilla, L., Filbà-Martínez, À., Roger, X. S., Qamar, M. A., Domínguez‐García, J. L., & Gevorkov, L. (2023) · Energies · doi:10.3390/en16176344 · Cited by 105
Metadata
- Authors
- Yang, K., Zhang, L., Zhang, Z., Yu, H., Wang, W., Ouyang, M., Zhang, C., Sun, Q., Yan, X., Yang, S., & Liu, X.
- Affiliations
- Beihang University (CN)
- Imperial College London (GB)
- Coventry University (GB)
- First Automotive Works (China) (CN)
- Corresponding author
- Yan, Xiaoyu
- Yang, Shichun
- Liu, Xinhua
- ORCID
- Venue
- Batteries
- Publisher
- MDPI AG
- Published
- 2023-07-01
- Volume
- 9
- Issue
- 7
- Pages
- 351
- ISSN
- 2313-0105 (ISSN-L)
- OpenAlex
- W4382940595
- Cited by
- 58
- References
- 242
- Citations by year
- 2026: 16 · 2025: 15 · 2024: 21 · 2023: 6
- FWCI
- 4.22
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Batteries (publishedVersion, cc-by)
- Pure (Coventry University) (submittedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (52102470)
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Health Monitoring Techniques
- Keywords
- lithium-ion batteries, state of health estimation, battery management systems, model-based estimation, machine learning, knowledge graphs, multi-model fusion, cloud-edge collaboration, battery lifecycle management
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.