The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Gelatin-Methacryloyl (GelMA) Hydrogels with Defined Degree of Functionalization as a Versatile Toolkit for 3D Cell Culture and Extrusion Bioprinting
Open accessAbstract
Gelatin-methacryloyl (GelMA) is a semi-synthetic hydrogel which consists of gelatin derivatized with methacrylamide and methacrylate groups. These hydrogels provide cells with an optimal biological environment (e.g., RGD motifs for adhesion) and can be quickly photo-crosslinked, which provides shape fidelity and stability at physiological temperature. In the present work, we demonstrated how GelMA hydrogels can be synthesized with a specific degree of functionalization (DoF) and adjusted to the intended application as a three-dimensional (3D) cell culture platform. The focus of this work lays on producing hydrogel scaffolds which provide a cell promoting microenvironment for human adipose tissue-derived mesenchymal stem cells (hAD-MSCs) and are conductive to their adhesion, spreading, and proliferation. The control of mechanical GelMA properties by variation of concentration, DoF, and ultraviolet (UV) polymerization conditions is described. Moreover, hAD-MSC cell viability and morphology in GelMA of different stiffness was evaluated and compared. Polymerized hydrogels with and without cells could be digested in order to release encapsulated cells without loss of viability. We also demonstrated how hydrogel viscosity can be increased by the use of biocompatible additives, in order to enable the extrusion bioprinting of these materials. Taken together, we demonstrated how GelMA hydrogels can be used as a versatile tool for 3D cell cultivation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Dominici, M., Le Blanc, K., Mueller, I., Slaper-Cortenbach, I., Marini, F. C., Krause, D. S., Deans, R. J., Keating, A., Prockop, D. J., & Horwitz, E. M. (2006) · Cytotherapy · doi:10.1080/14653240600855905 · Cited by 17,766
Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels
Yue, K., Trujillo-de Santiago, G., Alvarez, M. M., Tamayol, A., Annabi, N., & Khademhosseini, A. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.045 · Cited by 3,146 · cited 2×
“In contrast to gelatin, however, the modification with methacryloyl side groups allows the GelMA molecule to undergo rapid polymerization in the presence of UV light and a photoinitiator (PI), resulting in covalent crosslinking through the creation of a methacryloyl backbone [4].”
BackgroundCell-laden microengineered gelatin methacrylate hydrogels
Nichol, J. W., Koshy, S. T., Bae, H., Hwang, C. M., Yamanlar, S., & Khademhosseini, A. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.03.064 · Cited by 2,377
Determination of free amino groups in proteins by trinitrobenzenesulfonic acid
Habeeb, A. F. S. A. (1966) · Analytical Biochemistry · doi:10.1016/0003-2697(66)90275-2 · Cited by 2,038
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Structural and Rheological Properties of Methacrylamide Modified Gelatin Hydrogels
Van Den Bulcke, A. I., Bogdanov, B., De Rooze, N., Schacht, E. H., Cornelissen, M., & Berghmans, H. (2000) · Biomacromolecules · doi:10.1021/bm990017d · Cited by 1,536
Three-dimensional cell culture: the missing link in drug discovery
Breslin, S., & O’Driscoll, L. (2013) · Drug Discovery Today · doi:10.1016/j.drudis.2012.10.003 · Cited by 1,332
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
The role of matrix stiffness in regulating cell behavior†
Wells, R. G. (2008) · Hepatology · doi:10.1002/hep.22193 · Cited by 1,059
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015 · cited 5×
“Shape fidelity is further supported by cooling the printing platform, which supports the natural sol-gel transition of GelMA [8].”
BackgroundInfluentialLoessner, D., Meinert, C., Kaemmerer, E., Martine, L. C., Yue, K., Levett, P. A., Klein, T. J., Melchels, F. P. W., Khademhosseini, A., & Hutmacher, D. W. (2016) · Nature Protocols · doi:10.1038/nprot.2016.037 · Cited by 868
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Gelatin-Methacryloyl Hydrogels: Towards Biofabrication-Based Tissue Repair
Klotz, B. J., Gawlitta, D., Rosenberg, A. J. W. P., Malda, J., & Melchels, F. P. W. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.01.002 · Cited by 846
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Functional Human Vascular Network Generated in Photocrosslinkable Gelatin Methacrylate Hydrogels
Chen, Y., Lin, R., Qi, H., Yang, Y., Bae, H., Melero‐Martin, J. M., & Khademhosseini, A. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101662 · Cited by 779
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach
Xavier, J. R., Thakur, T., Desai, P., Jaiswal, M. K., Sears, N., Cosgriff-Hernandez, E., Kaunas, R., & Gaharwar, A. K. (2015) · ACS Nano · doi:10.1021/nn507488s · Cited by 653
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
3D Cell Culture: A Review of Current Approaches and Techniques
Haycock, J. W. (2011) · Methods in Molecular Biology · doi:10.1007/978-1-60761-984-0_1 · Cited by 534
Precise Tuning of Facile One-Pot Gelatin Methacryloyl (GelMA) Synthesis
Shirahama, H., Lee, B. H., Tan, L. P., & Cho, N.-J. (2016) · Scientific Reports · doi:10.1038/srep31036 · Cited by 473
The effect of photopolymerization on stem cells embedded in hydrogels
Fedorovich, N. E., Oudshoorn, M. H., van Geemen, D., Hennink, W. E., Alblas, J., & Dhert, W. J. A. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.09.037 · Cited by 416
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Synthesis and Characterization of Types A and B Gelatin Methacryloyl for Bioink Applications
Lee, B., Lum, N., Seow, L., Lim, P., & Tan, L. (2016) · Materials · doi:10.3390/ma9100797 · Cited by 243
Development and characterisation of a new bioink for additive tissue manufacturing
Melchels, F. P. W., Dhert, W. J. A., Hutmacher, D. W., & Malda, J. (2014) · Journal of Materials Chemistry B · doi:10.1039/c3tb21280g · Cited by 222
Synthetic 3D multicellular systems for drug development
Rimann, M., & Graf-Hausner, U. (2012) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2012.01.011 · Cited by 221
Gelatine Methacrylamide-Based Hydrogels: An Alternative Three-Dimensional Cancer Cell Culture System
Kaemmerer, E., Melchels, F. P. W., Holzapfel, B. M., Meckel, T., Hutmacher, D. W., & Loessner, D. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.035 · Cited by 219
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Lee, B. H., Shirahama, H., Cho, N.-J., & Tan, L. P. (2015) · RSC Advances · doi:10.1039/c5ra22028a · Cited by 170
Hydrogels for 3D mammalian cell culture: a starting guide for laboratory practice
Ruedinger, F., Lavrentieva, A., Blume, C., Pepelanova, I., & Scheper, T. (2015) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-6253-y · Cited by 166
Self-citationExtracellular Matrix Stiffness Regulates Osteogenic Differentiation through MAPK Activation
Hwang, J.-H., Byun, M. R., Kim, A. R., Kim, K. M., Cho, H. J., Lee, Y. H., Kim, J.-W., Jeong, M. G., Hwang, E. S., & Hong, J. H. (2015) · PLoS ONE · doi:10.1371/journal.pone.0135519 · Cited by 134
Materials-Directed Differentiation of Mesenchymal Stem Cells for Tissue Engineering and Regeneration
Leach, J. K., & Whitehead, J. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00741 · Cited by 129
Cited by
Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications
Yu, C., Schimelman, J., Wang, P., Miller, K. L., Ma, X., You, S., Guan, J., Sun, B., Zhu, W., & Chen, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00810 · Cited by 579
Zhu, M., Wang, Y., Ferracci, G., Zheng, J., Cho, N.-J., & Lee, B. H. (2019) · Scientific Reports · doi:10.1038/s41598-019-42186-x · Cited by 483
Sun, M., Sun, X., Wang, Z., Guo, S., Yu, G., & Yang, H. (2018) · Polymers · doi:10.3390/polym10111290 · Cited by 449
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks
Cui, X., Li, J., Hartanto, Y., Durham, M., Tang, J., Zhang, H., Hooper, G., Lim, K., & Woodfield, T. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901648 · Cited by 383
Metadata
- Authors
- Pepelanova, I., Kruppa, K., Scheper, T., & Lavrentieva, A.
- Venue
- Bioengineering
- Publisher
- MDPI AG
- Published
- 2018-07-18
- Volume
- 5
- Issue
- 3
- Pages
- 55
- ISSN
- 2306-5354 (ISSN-L)
- OpenAlex
- W2883462871
- Cited by
- 416
- References
- 30
- FWCI
- 11.28
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.