The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Lattice Structures and Functionally Graded Materials Applications in Additive Manufacturing of Orthopedic Implants: A Review
Open accessAbstract
A major advantage of additive manufacturing (AM) technologies is the ability to print customized products, which makes these technologies well suited for the orthopedic implants industry. Another advantage is the design freedom provided by AM technologies to enhance the performance of orthopedic implants. This paper presents a state-of-the-art overview of the use of AM technologies to produce orthopedic implants from lattice structures and functionally graded materials. It discusses how both techniques can improve the implants’ performance significantly, from a mechanical and biological point of view. The characterization of lattice structures and the most recent finite element analysis models are explored. Additionally, recent case studies that use functionally graded materials in biomedical implants are surveyed. Finally, this paper reviews the challenges faced by these two applications and suggests future research directions required to improve their use in orthopedic implants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Additive manufacturing: scientific and technological challenges, market uptake and opportunities
Tofail, S. A. M., Koumoulos, E. P., Bandyopadhyay, A., Bose, S., O’Donoghue, L., & Charitidis, C. (2018) · Materials Today · doi:10.1016/j.mattod.2017.07.001 · Cited by 2,136
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
The properties of foams and lattices
Ashby, M. F. (2006) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2005.1678 · Cited by 1,771
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
HUISKES, R., WEINANS, H., & RIETBERGEN, B. V. (1992) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199201000-00014 · Cited by 1,213
Processing techniques for functionally graded materials
Kieback, B., Neubrand, A., & Riedel, H. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00578-1 · Cited by 979
Sing, S. L., An, J., Yeong, W. Y., & Wiria, F. E. (2016) · Journal of Orthopaedic Research · doi:10.1002/jor.23075 · Cited by 942
Bobbert, F. S. L., Lietaert, K., Eftekhari, A. A., Pouran, B., Ahmadi, S. M., Weinans, H., & Zadpoor, A. A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.02.024 · Cited by 873
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Attar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Popovich, V., Borisov, E. V., Popovich, A., Sufiiarov, V. S., Masaylo, D. V., & Alzina, L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.10.075 · Cited by 580
Functionally graded materials for biomedical applications
Pompe, W., Worch, H., Epple, M., Friess, W., Gelinsky, M., Greil, P., Hempel, U., Scharnweber, D., & Schulte, K. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00580-x · Cited by 575
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Recent development in modeling and analysis of functionally graded materials and structures
Gupta, A., & Talha, M. (2015) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2015.07.001 · Cited by 531
Tan, X. P., Tan, Y. J., Chow, C. S. L., Tor, S. B., & Yeong, W. Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.094 · Cited by 514
Arabnejad, S., Johnston, B., Tänzer, M., & Pasini, D. (2016) · Journal of Orthopaedic Research® · doi:10.1002/jor.23445 · Cited by 481
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Current trends in the design of scaffolds for computer-aided tissue engineering
Giannitelli, S. M., Accoto, D., Trombetta, M., & Rainer, A. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.024 · Cited by 451
Compressive behaviour of stainless steel micro-lattice structures
Gümrük, R., & Mines, R. A. W. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.01.006 · Cited by 445
Low stiffness porous Ti structures for load-bearing implants
Krishna, B. V., Bose, S., & Bandyopadhyay, A. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.03.008 · Cited by 441
Amin Yavari, S., Ahmadi, S. M., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.12.015 · Cited by 431
Kadkhodapour, J., Montazerian, H., Darabi, A., Anaraki, A. P., Ahmadi, S. M., ZADPOOR, A. A., & Schmauder, S. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.06.012 · Cited by 413
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Ahmadi, S., Yavari, S., Wauthle, R., Pouran, B., Schrooten, J., Weinans, H., & Zadpoor, A. (2015) · Materials · doi:10.3390/ma8041871 · Cited by 399
Li, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Functionally graded materials for orthopedic applications – an update on design and manufacturing
Sola, A., Bellucci, D., & Cannillo, V. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.013 · Cited by 314
Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting
Murr, L. E., Gaytan, S. M., Martinez, E., Medina, F., & Wicker, R. B. (2012) · International Journal of Biomaterials · doi:10.1155/2012/245727 · Cited by 306
Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.06.006 · Cited by 302
Van der Stok, J., Van der Jagt, O. P., Amin Yavari, S., De Haas, M. F. P., Waarsing, J. H., Jahr, H., Van Lieshout, E. M. M., Patka, P., Verhaar, J. A. N., Zadpoor, A. A., et al. (2013) · Journal of Orthopaedic Research · doi:10.1002/jor.22293 · Cited by 271
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Speirs, M., Van Hooreweder, B., Van Humbeeck, J., & Kruth, J.-P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.01.016 · Cited by 267
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Tsopanos, S., Mines, R. A. W., McKown, S., Shen, Y., Cantwell, W. J., Brooks, W., & Sutcliffe, C. J. (2010) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4001743 · Cited by 252
Zhang, X.-Y., Fang, G., & Zhou, J. (2017) · Materials · doi:10.3390/ma10010050 · Cited by 222
Leventhal, G. S. (1951) · Journal of Bone and Joint Surgery · doi:10.2106/00004623-195133020-00021 · Cited by 220
An image-based approach for designing and manufacturing craniofacial scaffolds
Hollister, S. J., Levy, R. A., Chu, T.-M., Halloran, J. W., & Feinberg, S. E. (2000) · International Journal of Oral and Maxillofacial Surgery · doi:10.1034/j.1399-0020.2000.290115.x · Cited by 219
Dumas, M., Terriault, P., & Brailovski, V. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.021 · Cited by 206
Compression‐compression fatigue of selective electron beam melted cellular titanium (Ti‐6Al‐4V)
Hrabe, N. W., Heinl, P., Flinn, B., Körner, C., & Bordia, R. K. (2011) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31901 · Cited by 203
Arabnejad Khanoki, S., & Pasini, D. (2012) · Journal of Biomechanical Engineering · doi:10.1115/1.4006115 · Cited by 192
Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering
Chen, Y., Frith, J. E., Dehghan-Manshadi, A., Attar, H., Kent, D., Soro, N. D. M., Bermingham, M. J., & Dargusch, M. S. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.07.015 · Cited by 185
Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
Yánez, A., Herrera, A., Martel, O., Monopoli, D., & Afonso, H. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.06.016 · Cited by 174
Li, K., Gao, X.-L., & Subhash, G. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.10.007 · Cited by 169
Revival of pure titanium for dynamically loaded porous implants using additive manufacturing
Wauthle, R., Ahmadi, S. M., Amin Yavari, S., Mulier, M., Zadpoor, A. A., Weinans, H., Van Humbeeck, J., Kruth, J.-P., & Schrooten, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.05.001 · Cited by 163
Static behavior of lattice structures produced via direct metal laser sintering technology
Crupi, V., Kara, E., Epasto, G., Guglielmino, E., & Aykul, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.003 · Cited by 157
Sing, S. L., Yeong, W. Y., Wiria, F. E., & Tay, B. Y. (2016) · Experimental Mechanics · doi:10.1007/s11340-015-0117-y · Cited by 147
Design and additive manufacturing of cellular lattice structures
Hao, L., Raymont, D. R., Yan, C.-W., Hussein, A. Y., & Young, P. (2011) · CRC Press eBooks · doi:10.1201/b11341-40 · Cited by 122
Algardh, J. K., Horn, T., West, H., Aman, R., Snis, A., Engqvist, H., Lausmaa, J., & Harrysson, O. L. A. (2016) · Additive manufacturing · doi:10.1016/j.addma.2016.06.009 · Cited by 96
Lin, C.-Y., Hsiao, C., Chen, P.-Q., & Hollister, S. J. (2004) · Spine · doi:10.1097/01.brs.0000134573.14150.1a · Cited by 92
Fatigue design of a mechanically biocompatible lattice for a proof-of-concept femoral stem
Arabnejad, S., & Pasini, D. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.03.002 · Cited by 90
A study of 4D printing and functionally graded additive manufacturing
Pei, E., Loh, G. H., Harrison, D. J., Almeida, H. A., Monzón, M., & Paz, R. (2017) · Assembly Automation · doi:10.1108/aa-01-2017-012 · Cited by 66
Advances in Metallic Biomaterials
Niinomi, M., Narushima, T., & Nakai, M. (2015) · Springer series in biomaterials science and engineering · doi:10.1007/978-3-662-46842-5 · Cited by 52
Alternative designs of load−sharing cobalt chromium graded femoral stems
Limmahakhun, S., Oloyede, A., Chantarapanich, N., Jiamwatthanachai, P., Sitthiseripratip, K., Xiao, Y., & Yan, C. (2017) · Materials Today Communications · doi:10.1016/j.mtcomm.2017.05.002 · Cited by 48
Hazlehurst, K. B., Wang, C., & Stanford, M. (2013) · Medical Hypotheses · doi:10.1016/j.mehy.2013.10.012 · Cited by 46
Herrera, A., Yánez, A., Martel, O., Afonso, H., & Monopoli, D. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.08.050 · Cited by 42
González, F. J. Q., & Nuño, N. (2015) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2015.1075009 · Cited by 38
Deng, X., Wang, Y., Yan, J., Liu, T., & Wang, S. (2015) · Journal of Mechanical Design · doi:10.1115/1.4031803 · Cited by 32
Finite element analysis on longitudinal and radial functionally graded femoral prosthesis
Oshkour, A. A., Osman, N. A. A., Davoodi, M. M., Yau, Y. H., Tarlochan, F., Abas, W. A. B. W., & Bayat, M. (2013) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2583 · Cited by 31
Topological shape optimization of multifunctional tissue engineering scaffolds with level set method
Wang, Y., Luo, Z., Zhang, N., & Qin, Q. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1409-2 · Cited by 28
Design of a Graded Cellular Structure for an Acetabular Hip Replacement Component
Wang, H. V., Johnston, S. R., & Rosen, D. W. (2006) · doi:10.26153/tsw/7122 · Cited by 28
Park, S.-I., Rosen, D. W., & Duty, C. (2014) · Cited by 11
Cited by
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Saleh, B., Jiang, J., Fathi, R., Al-hababi, T., Xu, Q., Wang, L., Song, D., & Ma, A. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108376 · Cited by 738
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Metadata
- Authors
- Mahmoud, D., & Elbestawi, M.
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2017-10-12
- Volume
- 1
- Issue
- 2
- Pages
- 13
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W2763986224
- Cited by
- 338
- References
- 71
- FWCI
- 17.09
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.