The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Open accessAbstract
Additive manufacturing (AM) is the fabrication of real three-dimensional objects from metals, ceramics, or plastics by adding material, usually as layers. There are several variants of AM; among them material extrusion (ME) is one of the most versatile and widely used. In MEAM, molten or viscous materials are pushed through an orifice and are selectively deposited as strands to form stacked layers and subsequently a three-dimensional object. The commonly used materials for MEAM are thermoplastic polymers and particulate composites; however, recently innovative formulations of highly-filled polymers (HP) with metals or ceramics have also been made available. MEAM with HP is an indirect process, which uses sacrificial polymeric binders to shape metallic and ceramic components. After removing the binder, the powder particles are fused together in a conventional sintering step. In this review the different types of MEAM techniques and relevant industrial approaches for the fabrication of metallic and ceramic components are described. The composition of certain HP binder systems and powders are presented; the methods of compounding and filament making HP are explained; the stages of shaping, debinding, and sintering are discussed; and finally a comparison of the parts produced via MEAM-HP with those produced via other manufacturing techniques is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Additive manufacturing: technology, applications and research needs
Guo, N., & Leu, M. C. (2013) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-013-0248-8 · Cited by 2,073
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
N. Turner, B., Strong, R., & A. Gold, S. (2014) · Rapid Prototyping Journal · doi:10.1108/rpj-01-2013-0012 · Cited by 1,450
Material issues in additive manufacturing: A review
Singh, S., Ramakrishna, S., & Singh, R. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2016.11.006 · Cited by 899
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Murr, L. E., Gaytan, S. M., Medina, F., Lopez, H., Martinez, E., Machado, B. I., Hernandez, D. H., Martinez, L., Lopez, M. I., Wicker, R. B., et al. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0010 · Cited by 636
Additive Manufacturing of Dense Alumina Ceramics
Schwentenwein, M., & Homa, J. (2015) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12319 · Cited by 465
Composites by rapid prototyping technology
Kumar, S., & Kruth, J.-P. (2010) · Materials & Design · doi:10.1016/j.matdes.2009.07.045 · Cited by 463
Structural quality of parts processed by fused deposition
Agarwala, M. K., Jamalabad, V. R., Langrana, N. A., Safari, A., Whalen, P. J., & Danforth, S. C. (1996) · Rapid Prototyping Journal · doi:10.1108/13552549610732034 · Cited by 406
Additive fabrication technologies applied to medicine and health care: a review
Giannatsis, J., & Dedoussis, V. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1308-1 · Cited by 389
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Spoerk, M., Gonzalez-Gutierrez, J., Sapkota, J., Schuschnigg, S., & Holzer, C. (2018) · Plastics, Rubber and Composites · doi:10.1080/14658011.2017.1399531 · Cited by 282
Self-citationAn exploration of binder jetting of copper
Bai, Y., & Williams, C. B. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-12-2014-0180 · Cited by 270
Gonzalez, J. A., Mireles, J., Lin, Y., & Wicker, R. B. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.079 · Cited by 265
Nandwana, P., Elliott, A. M., Siddel, D., Merriman, A., Peter, W. H., & Babu, S. S. (2017) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2016.12.002 · Cited by 249
Sells, E., Bailard, S., Smith, Z., Bowyer, A., & Olliver, V. (2009) · WORLD SCIENTIFIC eBooks · doi:10.1142/9789814280280_0028 · Cited by 244
Three‐dimensional Printing for Catalytic Applications: Current Status and Perspectives
Zhou, X., & Liu, C. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201701134 · Cited by 231
Spoerk, M., Arbeiter, F., Cajner, H., Sapkota, J., & Holzer, C. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45401 · Cited by 227
Self-citationNew developments in fused deposition modeling of ceramics
Bellini, A., Shor, L., & Guceri, S. I. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510612901 · Cited by 216
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
On Surface Finish and Dimensional Accuracy of FDM Parts after Cold Vapor Treatment
Garg, A., Bhattacharya, A., & Batish, A. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2015.1070425 · Cited by 192
Feedstock material property – process relationships in fused deposition of ceramics (FDC)
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Harper, B., Safari, A., Danforth, S. C., Wu, G., Langrana, N., Guceri, S., & Yardimci, A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010373344 · Cited by 188
Thermoplastic 3D Printing—An Additive Manufacturing Method for Producing Dense Ceramics
Scheithauer, U., Schwarzer, E., Richter, H., & Moritz, T. (2014) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12306 · Cited by 177
Vielma, P. T., Cervera, A., Levenfeld, B., & Várez, A. (2007) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2007.08.004 · Cited by 167
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
Solid freeform fabrication of metal components using fused deposition of metals
Wu, G., Langrana, N. A., Sadanji, R., & Danforth, S. C. (2002) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(01)00079-6 · Cited by 144
Review: Thermal Debinding Process in Particulate Materials Processing
Enneti, R. K., Park, S. J., German, R. M., & Atre, S. V. (2011) · Materials and Manufacturing Processes · doi:10.1080/10426914.2011.560233 · Cited by 135
Malinauskas, M., Rekštytė, S., Lukoševičius, L., Butkus, S., Balčiūnas, E., Pečiukaitytė, M., Baltriukienė, D., Bukelskienė, V., Butkevičius, A., Kucevičius, P., et al. (2014) · Micromachines · doi:10.3390/mi5040839 · Cited by 127
Spoerk, M., González-Gutiérrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L., & Holzer, C. (2018) · Polymers · doi:10.3390/polym10050490 · Cited by 123
Self-citationLous, G., Cornejo, I., McNulty, T. F., Safari, A., & Danforth, S. C. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01159.x · Cited by 122
Schwarzer, E., Götz, M., Markova, D., Stafford, D., Scheithauer, U., & Moritz, T. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2017.05.046 · Cited by 120
Solvent debinding mechanism for alumina injection molded compacts with water-soluble binders
Yang, W.-W., Yang, K.-Y., Wang, M.-C., & Hon, M. (2003) · Ceramics International · doi:10.1016/s0272-8842(02)00226-2 · Cited by 114
Design for additive manufacturing of composite materials and potential alloys: a review
Hegab, H. A. (2016) · Manufacturing Review · doi:10.1051/mfreview/2016010 · Cited by 112
Development of a binder formulation for fused deposition of ceramics
McNulty, T. F., Mohammadi, F., Bandyopadhyay, A. K., Shanefield, D. J., Danforth, S. C., & Safari, A. (1998) · Rapid Prototyping Journal · doi:10.1108/13552549810239012 · Cited by 109
Some Critical Issues for Injection Molding
Wang, J. (2012) · InTech eBooks · doi:10.5772/2294 · Cited by 104
Development of the Improving Process for the 3D Printed Structure
Takagishi, K., & Umezu, S. (2017) · Scientific Reports · doi:10.1038/srep39852 · Cited by 102
A Novel Approach to Additive Manufacturing: Screw Extrusion 3D-Printing
Valkenaers, H., Vogeler, F., Ferraris, E., Voet, A., & Kruth, J.-P. (2013) · International Conference on Multi-Material Micro Manufacture (4M) · doi:10.3850/978-981-07-7247-5-359 · Cited by 79
Ellis, A., Noble, C. J., & Hopkinson, N. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.07.003 · Cited by 53
González-Gutiérrez, J., Ðuretek, I., Kukla, C., Poljšak, A., Bek, M., Emri, I., & Holzer, C. (2016) · Metals · doi:10.3390/met6060129 · Cited by 52
Self-citationCatamoldTM-A new direction for powder injection molding
Blömacher, M., & Weinand, D. (1997) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(96)00014-3 · Cited by 32
Effect of infra‐red power level on the sintering behaviour in the high speed sintering process
Majewski, C., Oduye, D., Thomas, H. R., & Hopkinson, N. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810878012 · Cited by 29
Venkataraman, N., Rangarajan, S., Matthewson, M. J., Safari, A., Danforth, S. C., Yardimci, A., & Güçeri, S. İ. (1999) · doi:10.26153/tsw/827 · Cited by 21
Qualification of metal injection molding (MIM)
Heaney, D. F. (2012) · Elsevier eBooks · doi:10.1533/9780857096234.2.254 · Cited by 10
Statistical Analysis of Binder Behavior during Debinding Step in Powder Injection Molding (PIM)
Chakartnarodom, P., & Chuankrerkkul, N. (2014) · Advanced materials research · doi:10.4028/www.scientific.net/amr.970.172 · Cited by 4
Cited by
An overview of modern metal additive manufacturing technology
Armstrong, M., Mehrabi, H., & Naveed, N. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.10.060 · Cited by 549
Honarvar, F., & Varvani-Farahani, A. (2020) · Ultrasonics · doi:10.1016/j.ultras.2020.106227 · Cited by 489
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Additive manufacturing of ceramics for dental applications: A review
Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 441
Shahzad, A., & Lazoglu, I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109249 · Cited by 372
Metadata
- Authors
- Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., & Holzer, C.
- Venue
- Materials
- Publisher
- MDPI AG
- Published
- 2018-05-18
- Volume
- 11
- Issue
- 5
- Pages
- 840
- ISSN
- 1996-1944 (ISSN-L)
- OpenAlex
- W2804611663
- Cited by
- 713
- References
- 52
- FWCI
- 23.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.