Synthesis and Biological Application of Polylactic Acid
Open accessThe DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 9 of the 125 sources its claims cite were checked for support.
Abstract
Over the past few decades, with the development of science and technology, the field of biomedicine has rapidly developed, especially with respect to biomedical materials. Low toxicity and good biocompatibility have always been key targets in the development and application of biomedical materials. As a degradable and environmentally friendly polymer, polylactic acid, also known as polylactide, is favored by researchers and has been used as a commercial material in various studies. Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation. Good biocompatibility and biodegradability have led it to be approved by the U.S. Food and Drug Administration (FDA) as a biomedical material. Polylactic acid has good physical properties, and its modification can optimize its properties to a certain extent. Polylactic acid blocks and blends play significant roles in drug delivery, implants, and tissue engineering to great effect. This article describes the synthesis of polylactic acid (PLA) and its raw materials, physical properties, degradation, modification, and applications in the field of biomedicine. It aims to contribute to the important knowledge and development of PLA in biomedical applications.
Overview
CoChat Summary
TL;DR
This review summarizes polylactic acid (PLA) synthesis, physical properties, degradation, modification, and biomedical applications. It highlights PLA’s biocompatibility and biodegradability while noting challenges in mechanical properties, nanoparticle drug-delivery commercialization, and production cost.
Key findings
- PLA is a biodegradable, biocompatible polymer approved by the FDA for biomedical use; it is made from lactic acid, which is traditionally obtained by sugar fermentation, and exists as PLLA, PDLA, and PDLLA.
- Key properties include processing temperatures of 170–230 °C; PLLA and PDLA melting points of 207 °C; racemic crystals with a melting point of 230 °C and ultimate tensile strength of 50 MPa; a glass transition temperature of 55 °C for PLA of 22,000 g mol−1; and a heat of fusion of 93.7 J g−1 for 100% pure crystals.
- Modification by copolymerization, blending, plasticizers, or crosslinking can improve PLA’s hydrophobicity, toughness, and degradation; examples include PLA–PEG hemoglobin microcapsules reaching a 90% embedding rate versus 7.9% for PLA alone, a PLA–naltrexone complex with 67% in vitro release at 35 days, and PLA–PEG–PLA paclitaxel microspheres with 49% release in one month.
- Biomedical applications include tissue engineering, drug delivery, and implants; PLA-based stents are commercialized, and 3D-printed PLA scaffolds are reported to cause less inflammation, but no PLA nanoparticle has been successfully marketed for drug delivery.
Methods
- Narrative review of PLA synthesis, raw materials, physical properties, degradation, modification, and biomedical applications; no primary experimental data, sample, or systematic search strategy is described.
- Main analysis is qualitative synthesis of cited literature and selected examples, with no meta-analysis or statistical pooling.
Limitations
- The paper states that PLA suffers from brittleness, poor mechanical properties, slow crystallization speed, and low crystallinity; it also states that drug-delivery nanoparticles face challenges including side effects, toxicity, size/position/shape issues, positive-charge cytotoxicity, oxidative stress, DNA damage, ROS-related inflammation, hemolysis risk, complex disease microenvironments, and blood interactions, and that commercialization is limited by price and raw-material production efficiency.
- Evident from the text: as a narrative review, it lacks systematic search/inclusion criteria and quantitative synthesis, and many claims rely on cited secondary literature without new experimental validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Synthesis of polylactic acid (PLA) from l- and d-lactic acids [28]. Adapted from Auras et al. by permission of Wiley–VCH Verlag GmbH & Co. KGaA.](https://figures.cochat.ai/paper-figures/c0c15b60797046e2a98a260168f15ebf/synthesis-and-biological-application-of-polylactic-acid-figure-2.jpg)

![Figure 4 High drug loading and pH-responsivity PLA-g-doxorubicin (DOX) nanoparticles [99]. Reprinted from Cheng with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/f2964f7b6801471a93511477c2ba67d7/synthesis-and-biological-application-of-polylactic-acid-figure-4.jpg)
![Figure 5 Schematic illustration of the concept of stereocomplex hydrogel formed by mixing aqueous solutions of bio-polymers containing enantiomeric oligo(lactic acid) [125]. Reprinted from Nostrum with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/7afa96ad62934c7c95f90c9477ca9c3d/synthesis-and-biological-application-of-polylactic-acid-figure-5.jpg)
Verification
Claims the paper makes
4 Valid · 0 Not valid · 64 Not checked · 10 Own results and interpretations
None of the sources cited for this claim have been checked yet.
In the paper
“The degree of crystallinity affects the degradation of PLA [52,53].”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.3. PLA Properties
What the sources say
- Could not verifycites [52] Li H. Huneault M.A. Effect of nucleation and plasticization on the crystallization of poly (lactic acid) Polymer 2007 48 6855 6866 10.1016/j.polymer.2007.09.020 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA’s compostability, while §3.4 examines crystallinity during molding and §3.6 examines thermal resistance. None of these passages addresses whether the degree of crystallinity affects PLA degradation; searches for degradation, biodegradation, and hydrolysis found no passage establishing that relationship. Page numbers were not available in our copy. (LLM, conf=0.74)
- Not checked yetcites [53] Liu H. Zhang J. Research Progress in Toughening Modification of Poly (lactic acid) J. Polym. Sci. Part B-Polym. Phys. 2011 49 1051 1083 10.1002/polb.22283 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
None of the sources cited for this claim have been checked yet.
In the paper
“Su et al. found that, when polylactic acid was used as the membrane material, the embedding rate of hemoglobin was very low, only 7.9%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
Our copy of Zhang et al. (2009) is entirely about octreotide acetate encapsulated in PLGA/PLA microspheres and the inhibition of peptide acylation by water-soluble divalent cationic salts (CaCl2, MnCl2); no passage mentions hemoglobin, a 'Su et al.' work, polylactic acid used as a membrane material, or a 7.9% embedding/encapsulation figure (searched: hemoglobin, Su et al. / 7.9%, encapsulation efficiency and protein loading, poly(lactic acid) membrane). The MATERIAL AND METHODS section ('Drug loading and encapsulation efficiency') reports only octreotide extraction/HPLC assay of microspheres, and the reference list contains no Su entry, so nothing in our copy either supports or contradicts the attributed finding. The decisive part is simply absent from this paper, so the claim cannot be judged against it. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Good biocompatibility also ensures that there is no inflammatory reaction in the surrounding tissue due to rejection after it enters the human body [75,76,77].”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application
What the sources say
- Partly supportedcites [75] Mitragotri S. Burke P.A. Langer R. Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies Nat. Rev. Drug Discov. 2014 13 655 672 10.1038/nrd4363 25103255 PMC4455970 sourceExperimental — accuracy not yet measured
The Microparticles section describes PLGA as biocompatible and says it degrades into toxicologically acceptable products. It does not make that claim specifically for PLA or say that biocompatibility ensures no inflammatory reaction or tissue rejection after implantation. (LLM, conf=0.85)
- Partly supportedcites [76] Nottelet B. Darcos V. Coudane J. Aliphatic polyesters for medical imaging and theranostic applications Eur. J. Pharm. Biopharm. 2015 97 350 370 10.1016/j.ejpb.2015.06.023 26614557 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) describes aliphatic polyesters as having demonstrated biocompatibility, which supports the general point about PLA. It does not say that PLA entering the human body causes no rejection-related inflammatory reaction in surrounding tissue; that absolute assurance is unsupported. (LLM, conf=0.87)
- Not checked yetcites [77] Tan D.S. Diversity-oriented synthesis: Exploring the intersections between chemistry and biology Nat. Chem. Biol. 2005 1 74 84 10.1038/nchembio0705-74 16408003 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“When using a polylactic acid–polyethylene glycol copolymer, the embedding rate reached 90%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA–PEG formulations only in a discussion of peptide acylation, not a 90% embedding rate. The Materials and Methods section on drug loading and encapsulation efficiency describes measurements of octreotide, not hemoglobin. Searches for hemoglobin and 90% found no passage supporting the claimed result. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Some plasticizers, such as low-molecular-weight citric acid, succinic acid, tartaric acid, and oxalate, are blended with PLA to change its mechanical and thermodynamic properties.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.4. Improvement of PLA Properties
What the sources say
- Not checked yetcites [66] Paul M.A. Alexandre M. Degee P. Henrist C. Rulmont A. Dubois P. New nanocomposite materials based on plasticized poly (l-lactide) and organo-modified montmorillonites: Thermal and morphological study Polymer 2003 44 443 450 10.1016/S0032-3861(02)00778-4 source
- Partly supportedcites [67] Paul M.A. Delcourt C. Alexandre M. Degee P. Monteverde F. Rulmont A. Dubois P. (Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization Macromol. Chem. Phys. 2005 206 484 498 10.1002/macp.200400324 sourceExperimental — accuracy not yet measured
Our copy of Paul et al. (2005) does support the general idea that blending a plasticizer into PLA alters its properties: the 'In situ Polymerization in Presence of PEG' and 'Masterbatch Process' sections state that PLA's brittleness means it 'needs to be plasticized in order to fulfill mechanical requirements', and that 20 wt.-% PEG 1000 lowers the PLA matrix T_g to 26 °C (from 61 °C for nonplasticized chains, 'Clay' section) while raising melting enthalpy to 42.9 J/g; the PEG triblock section reports T_g falling to 41 °C and 12 °C at 8.5 and 16.2 wt.-% PEG. However, none of the specific plasticizers the claim names — citric acid, succinic acid, tartaric acid, oxalate — appear anywhere in our copy (searched: citric, succinic, tartaric, oxalate, low-molecular-weight plasticizer); the only plasticizers treated are PEG 1000 and residual L,L-lactide monomer ('lactide is known to be a good plasticizer for P(L,L-LA)'). Mechanical properties are also invoked only as motivation, not measured. The enumerated acid plasticizers are therefore not supported by this source. (LLM, conf=0.68)
- Not checked yetcites [68] Pluta M. Paul M.A. Alexandre M. Dubois P. Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties J. Polym. Sci. Part B-Polym. Phys. 2006 44 299 311 10.1002/polb.20694 source
- Not checked yetcites [69] Tanoue S. Hasook A. Iemoto Y. Unryu T. Preparation of poly (lactic acid)/poly(ethylene glycol)/organoclay nanocomposites by melt compounding Polym. Compos. 2006 27 256 263 10.1002/pc.20174 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
31 more claims
Create a free account to see all 78 claims and to verify the 116 references still open.
- It may state two separate claims as one. 25
- Probably not a substantial claim. 22
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, in medicine, PLA can be applied in the areas of bioresorbent implants, surgical sutures, clamps, clips, surgical masks, or dressings [14,87,88,89,90,91].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“This drug delivery system avoids inconsistent local concentration on account of drug release. Thus, the therapeutic effect is enhanced [90].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“In vitro release was 49% in one month, making drug action time in the body longer.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“Since LA is a chiral molecule with d-type and l-type isomers, three forms of polylactic acid are formed: poly-l-lactic acid (PLLA), poly-d-lactic acid (PDLA), and poly-d,l-lactic acid (PDLLA).”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“If l-lactic acid and d,l-lactic acid monomers are used to synthesize PLLA, the above problems are avoided [35,36].”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > Abstract
“Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.1. Lactic Acid
“Chemical synthesis methods have also been applied for the industrial production of lactic acid.”
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Stimuli-responsive nanocarriers for drug delivery
Mura, S., Nicolas, J., & Couvreur, P. (2013) · Nature Materials · doi:10.1038/nmat3776 · Cited by 6,289
A Multicenter, Randomized, Controlled Clinical Trial of Transfusion Requirements in Critical Care
Hébert, P. C., Wells, G., Blajchman, M. A., Marshall, J., Martin, C., Pagliarello, G., Tweeddale, M., Schweitzer, I., & Yetisir, E. (1999) · New England Journal of Medicine · doi:10.1056/nejm199902113400601 · Cited by 5,187
Plant Polyphenols as Dietary Antioxidants in Human Health and Disease
Pandey, K. B., & Rizvi, S. I. (2009) · Oxidative Medicine and Cellular Longevity · doi:10.4161/oxim.2.5.9498 · Cited by 3,942
Weiss, G., & Goodnough, L. T. (2005) · New England Journal of Medicine · doi:10.1056/nejmra041809 · Cited by 3,800
Long-Circulating and Target-Specific Nanoparticles: Theory to Practice
Moghimi, S. M., Hunter, A. C., & Murray, J. C. (2001) · Pharmacological Reviews · doi:10.1016/s0031-6997(24)01494-7 · Cited by 3,515
Denosumab for Prevention of Fractures in Postmenopausal Women with Osteoporosis
Cummings, S. R., Martin, J. S., McClung, M. R., Siris, E. S., Eastell, R., Reid, I. R., Delmas, P., Zoog, H. B., Austin, M., Wang, A., et al. (2009) · New England Journal of Medicine · doi:10.1056/nejmoa0809493 · Cited by 3,489
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · cited 2×
“Synthesis of polylactic acid (PLA) from L‐ and D‐lactic acids [28].”
BackgroundDietary polyphenols and the prevention of diseases
Scalbert, A., Manach, C., Morand, C., Rémésy, C., & Jiménez, L. (2005) · Critical Reviews in Food Science and Nutrition · doi:10.1080/1040869059096 · Cited by 2,999
Biodegradable Long-Circulating Polymeric Nanospheres
Gref, R., Minamitake, Y., Peracchia, M. T., Trubetskoy, V., Torchilin, V., & Langer, R. (1994) · Science · doi:10.1126/science.8128245 · Cited by 2,920
Research works printed but not linked: 1
- Bud R. A history of lactic-acid making–A chapter in the history of biotechnology-benninga,h Ann. Sci. 1993 50 597
Cited by
Items 301–400 of 492
Naveed, N., Dutta, K., Balamurugan, D., Haveri, A. V., & Kannan Sabapathy, M. (2022) · Advances in Polymer Technology · doi:10.1155/2022/7448575 · Cited by 6
“Also, PLA is one of the most commercially used biopolymers at present and has found use in biomedical applications [14, 15].”
BackgroundWang, Y., Pei, X., Pei, Q., Zhang, Z., Zhang, Y., Wang, Q., & Wang, T. (2024) · Polymer International · doi:10.1002/pi.6612 · Cited by 4
Polymers and Nanotechnology for Industry 4.0
Diez-Pascual, A. M. (2023) · Polymers · doi:10.3390/polym15173556 · Cited by 4
Recent Progress in PLA‐Based Composite and their Application to Biomedical and Cosmetic Fields
Biswal, T. (2024) · Wiley eBooks · doi:10.1002/9783527848133.ch23 · Cited by 7
Purification of lactide by deep eutectic solvent assisted phase-change extraction technology
Yu, J., Xia, X., Lei, C., Zhu, J., & Yu, Y. (2025) · Separation and Purification Technology · doi:10.1016/j.seppur.2025.133421 · Cited by 3
Fiedler, N., Kleine, T., Oschatz, S., Schultz, S., Grabow, N., & Lebahn, K. (2025) · Polymers · doi:10.3390/polym17212863 · Cited by 4
Reddy, S., Reddy, M. V., Nivas, G. V., Yusuf, A. A., & Ammarullah, M. I. (2025) · Advances in Polymer Technology · doi:10.1155/adv/9156905 · Cited by 3
“Another important consideration is the ability of PLA to degrade into lactic acid, a naturally occurring substance in the human body, which is safely metabolized [61].”
Pandi, J. S., Pavadai, P., Theivendren, P., Murugesan, S., & Kunjiappan, S. (2026) · Biomedical Materials · doi:10.1088/1748-605x/ae3411 · Cited by 4
Zheng, G.-F., Han, L., Ma, T.-Y., Bian, J., Lin, J.-L., Zhao, Y., Pan, H., Wang, Z., & Zhang, H.-L. (2026) · Chinese Journal of Polymer Science · doi:10.1007/s10118-026-3565-1 · Cited by 3
Iosifeli, M., Kouranou, D., Tsimogiannis, D., Giannakourou, M. C., & Vouyiouka, S. (2026) · Polymer · doi:10.1016/j.polymer.2026.130004 · Cited by 4
Rahmayetty, R., Yulvianti, M., & Hartono, R. (2023) · Jurnal Rekayasa Kimia & Lingkungan · doi:10.23955/rkl.v17i2.25657 · Cited by 5
Influence of Low-Molecular-Weight Esters on Melt Spinning and Structure of Poly(lactic acid) Fibers
Gzyra‐Jagieła, K., Sulak, K., Draczyński, Z., Kęska, S., Puchalski, M., & Madej‐Kiełbik, L. (2024) · Materials · doi:10.3390/ma17061268 · Cited by 3
Wu, J., Chen, Z., Si, Z., Lou, X., & Yun, J. (2024) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2024.07.018 · Cited by 3
Development of Poly( l -lactic acid)-Yellow Propolis Membranes for Antioxidant Applications
Contieri, L. S., Vieira, C., Vaz, B. M. C., Pinto, D. C. G. A., Rostagno, M. A., Ventura, S. P. M., Sencadas, V., & Mesquita, L. M. D. S. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01899 · Cited by 4
Wang, X., Guo, Y., Liu, P., Chen, X., & Zhou, H. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2494701 · Cited by 4
“Polylactic acid (PLA) is a new type of biodegradable material, [93] which is made from starch raw materials proposed by renewable plant resources (such as corn).”
Stereoselective ring opening polymerization of lactide using chiral aluminum salan catalysts
Fosu, S. A., & Vlaisavljevich, B. (2025) · Dalton Transactions · doi:10.1039/d5dt01898f · Cited by 3
Wang, X., Zhang, X., Wang, B., Tan, Z., Chen, M., Shen, H., Cheng, H., Zhou, Z., Zhu, Z., Guo, J., et al. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1629244 · Cited by 4
Chitnis, K., Lu, Y., Rhoads, B., Chakka, L. R. J., Choudhury, S., & Maniruzzaman, M. (2025) · Drug Delivery and Translational Research · doi:10.1007/s13346-025-02006-4 · Cited by 7
“PLA has been widely used in tissue engineering, drug delivery, orthopedic devices, and implants because of its biodegradable and biocompatible nature [ 8].”
Acosta, S., Moreira, C. A., & Amaya, J. (2022) · LACCEI International Multi-Conference for Engineering, Education and Technology (LACCEI) · doi:10.18687/laccei2022.1.1.702 · Cited by 4
Paul, A., Sreedevi, K., Sharma, S. S., & Anjana, V. N. (2022) · Springer eBooks · doi:10.1007/978-981-16-6603-2_44-1 · Cited by 7
Preparation and characterization of poly(lactic acid)-based contact-active antimicrobial surfaces
Aynali, F., Doğancı, E., Balcı, H., Çetįn, M., Özkoç, G., & Sadıkoğlu, H. (2023) · Journal of Coatings Technology and Research · doi:10.1007/s11998-022-00758-z · Cited by 4
Li, W., Guo, M., Zeng, J., Yue, X., & Zhang, X. (2023) · Materials Express · doi:10.1166/mex.2023.2412 · Cited by 5
Characterization of 3D-printed graphene-reinforced PLA scaffold for bone regeneration
Karthic, M., Chockalingam, K., Vignesh, C., & Nagarajan, K. J. (2023) · Emerging Materials Research · doi:10.1680/jemmr.23.00048 · Cited by 4
Krishnakumar, S., & Senthilvelan, T. (2023) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057231219928 · Cited by 4
Synthesis of Poly(Lactic Acid) from Ammonium Lactate Fermentation Broth of Food Waste
Zhang, B., Guo, Y., Gao, M., Wu, C., Wang, X., Sun, X., & Wang, Q. (2024) · Waste and Biomass Valorization · doi:10.1007/s12649-024-02422-6 · Cited by 3
Lu, K., Shen, X., Shi, Y., He, Z., Zhang, D., & Zhou, M. (2024) · RSC Advances · doi:10.1039/d4ra02002b · Cited by 4
The need for fused deposition modeling of composite materials
Sola, A., & Trinchi, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-98823-0.00004-4 · Cited by 6
3D-printed degradable paclitaxel/polylactic acid scaffolds for the treatment of breast cancerPreprint
Tang, J., Ma, M., Yuan, J., Su, D., & Zhu, P. (2024) · Research Square · doi:10.21203/rs.3.rs-4477021/v1 · Cited by 3
Circular Economy Techniques for Waste Reduction in Food Packaging
Behmadi, H., Azarpazhooh, E., Emam‐Djomeh, Z., & Ramaswamy, H. S. (2025) · Methods and protocols in food science · doi:10.1007/978-1-0716-4646-5_14 · Cited by 2
Neijhoft, J., Kammerer, A., Feriduni, R., Schätzlein, E., Ritz, U., Söhling, N., Verboket, R. D., Schröder, K., Frank, J. M., Blaeser, A., et al. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214400 · Cited by 2
Qi, Y., Niu, J., Tian, H., Lu, T., Cao, H., Feng, Y., & Yu, X. (2025) · Journal of Rare Earths · doi:10.1016/j.jre.2025.07.015 · Cited by 2
Sun, Y., Tang, Y., Cong, R., Gao, W., Wang, J., & Yang, T. (2025) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5c02959 · Cited by 2
Berdimuradov, K., Berdimurodov, E. T., Kumar, A., Dagdag, O., Rbaa, M., & Jain, B. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781837677214-00139 · Cited by 2
Cao, Y., Shao, T., & Zhen, W. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111723 · Cited by 2
Wang, X., Zhao, Z., Shi, M., Xu, S., Zhou, X., & Zhao, K. X. (2026) · Drug Delivery · doi:10.1080/10717544.2026.2629037 · Cited by 2
“…including chitosan nanoparticles (NPs), gold NPs, carbon nanotubes, mesoporous silica NPs, calcium phosphate NPs, aluminum NPs, liposomes, and polylactic acid, can be employed as immune adjuvants and delivery systems (Levingstone et al. 2020; Li et al. 2020; Mishra et al. 2021; Nirwan et al. 2021).”
Emerging and Prospective Engineering Technologies Enabling Microneedle Based Vaccine Therapeutics
Ahmad, N., Jalil, N. A., Benziane, R., Iqbal, H., Rana, S. J., AbuAin, T., Al-Asiri, A., Kola-Mustapha, A. T., Arshad, M. S., & Ahmad, Z. (2026) · AAPS PharmSciTech · doi:10.1208/s12249-026-03409-3 · Cited by 2
Maldonado-Morales, Y., Ortega‐Toro, R., & Hernández-Fernández, J. (2026) · Journal of Composites Science · doi:10.3390/jcs10050252 · Cited by 2
“It is environmentally friendly and can be broken down by microorganisms into water and carbon dioxide [1].”
Recycling of Poly(lactic acid): From Molecular Degradation to Circular End-of-Life Strategies
Saygin, H., & Baysal, A. (2026) · Polymers · doi:10.3390/polym18141731 · Cited by 2
“For instance, 2 wt% halloysite nanotube addition increased the tensile strength of recycled PLA from 42.98 to 49.39 MPa, while 5 wt% increased the degradation temperature from 452.12 to 465.58 ◦ C [4].”
InfluentialPreparation and Properties of Physical Gel on Medical Titanium Alloy Surface
Fu, Y., Wu, Q., Yang, W., Wang, J., Liu, Z., Shi, H., & Liu, S. (2023) · Gels · doi:10.3390/gels9070558 · Cited by 2
“In recent years, PLA has been widely concerned [32,33].”
BackgroundBiałek, M., Klimasińska, A., Spaleniak, G. P., & Dziuk, B. (2023) · Molecules · doi:10.3390/molecules29010087 · Cited by 2
Chiu, T.-M., Chang, W.-H., Chen, E., & Wu, T. (2024) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2024.2365292 · Cited by 2
Rana, A. K., Kundu, S., & Kayal, S. (2024) · E3S Web of Conferences · doi:10.1051/e3sconf/202455201018 · Cited by 2
de Souza, J. R., Kukulka, E. C., Kito, L. T., Alves, M. D. S., dos Santos, V. R., Trichês, E. S., de Vasconcellos, L. M. R., Thim, G. P., Campos, T. M. B., & Borges, A. L. S. (2024) · Polymers for Advanced Technologies · doi:10.1002/pat.6627 · Cited by 2
Biodegradation and Compostability of Sustainable Polymers
Oliveira, R. N., & McGuinness, G. B. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15738-7.00085-4 · Cited by 2
Sharova, A., Park, J., & Shim, K. (2024) · Life Cycle · doi:10.54724/lc.2024.e10 · Cited by 3
Bergerová, E. D., Strasakova, M., Císař, J., Šopík, T., Dušánková, M., Vincent, I., Klaban, J., Hanusova, D., Uhercova, S., Hanyková, L., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.140529 · Cited by 4
Influence of aqueous environments on the stability of modified polylactide materials
Katruk, D. S., Levytskyi, V. Y., Маsyuk, A. S., Kulish-Pelenska, B. I., Kysil, K. V., & Laruk, Y. V. (2025) · Voprosy Khimii i Khimicheskoi Tekhnologii · doi:10.32434/0321-4095-2025-158-1-4-12 · Cited by 3
Barrier properties of polylactic acid to binary aqueous solution systems
Du, Y., Cao, J., Li, W., Huang, Y., Jiang, L., & Dan, Y. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.141050 · Cited by 2
Dzyazko, Y. S., Molina, L. C. A., Ribeiro, A. C., Wernke, G., & Bergamasco, R. (2024) · Ukrainian Chemistry Journal · doi:10.33609/2708-129x.90.7.2024.3-24 · Cited by 2
He, C., Zeng, W., Kong, R., Gong, J., Ma, W., Tie, Q., Zhang, M., Zhang, Q., Yi, X., & Guan, J. (2021) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2021.0162 · Cited by 2
Zhang, Y., Zhang, Z., Liu, Y., Cai, D., Gu, J., & Sun, D. S. (2023) · Molecules · doi:10.3390/molecules28124782 · Cited by 2
“PLA is an FDA-approved polymeric excipient for human usage, which has been widely used for nanoparticles and scaffolds materials because of its good biocompatibility [3,4].”
BackgroundZhang, J. (2023) · Theoretical and Natural Science · doi:10.54254/2753-8818/23/20231021 · Cited by 2
Kumar, R., & Razdan, S. (2022) · Wiley eBooks · doi:10.1002/9781119800897.ch10 · Cited by 3
Fused deposition modeling of composite materials at a glance – supplementary tables
Sola, A., & Trinchi, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-98823-0.00003-2 · Cited by 2
Hidawati, H., Saraswaty, V., Marganingrum, D., Nissa, R. C., Abdullah, A. H. D., & Handayani, S. R. (2023) · IOP Conference Series Earth and Environmental Science · doi:10.1088/1755-1315/1201/1/012096 · Cited by 1
General overview of polymers and two-dimensional nanofiller-based nanocomposites
Folorunso, O., Sadiku, R., & Hamam, Y. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-14131-7.00003-1 · Cited by 1
Natural Renewable Raw Materials for Green Polymer Synthesis and Biocomposite Fabrication
Tran, T. N., Mai, B. T., & Collins, M. N. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-15738-7.00081-7 · Cited by 1
Veeman, D., Maharajan, S. G., Padmanaban, B., & Subramaniyan, M. K. (2025) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-025-10816-3 · Cited by 1
Principal plastic polymers in agricultural and food sectors
Yasir, F., Khalid, N., Qaiser, Z., Sarfraz, W., & Naeem, N. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-22210-8.00003-1 · Cited by 3
Elshabrawy, H. A., Moustafa, H. A., Yacoub, M. H., & El-sherbiny, I. M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29066-4.00018-4 · Cited by 1
Polylactic Acid in Dentistry – A Sustainable Biomaterial for Oral Health and Clinical Practice
Musyt, W., Dudziński, S., Pietruszka, W., & Potrykus, M. (2025) · Journal of Education Health and Sport · doi:10.12775/jehs.2025.82.60275 · Cited by 2
Bazan-Panana, G. D., Torres-Calla, M. J., & Carranza‐Oropeza, M. V. (2025) · Polymers · doi:10.3390/polym17121708 · Cited by 2
“…limitations due to the presence of toxic impurities and the low molecular weight of the resulting polymer, ROP has proven to be the most efficient method for obtaining high-molecular-weight PLA, particularly when using catalysts such as tin(II) 2-ethylhexanoate, which is FDA-approved [7,8,11].”
Ferrández-Montero, A., Lieblich, M., Sánchez‐Herencia, A. J., Detsch, R., Boccaccini, A. R., & Ferrari, B. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.114906 · Cited by 2
The fundamentals of tissue engineering in the process of alveolar bone regeneration
Shirazian, S., Bahrami, N., Ai, J., Bayat, M., Mohamadnia, A., Khajavi, A., & Shemshadsara, F. G. (2025) · Journal of Oral and Maxillofacial Surgery Medicine and Pathology · doi:10.1016/j.ajoms.2025.07.003 · Cited by 1
Boiko, V. V., Riabov, S. V., Kobrina, L. V., & Kokhan, I. (2025) · Polymer journal · doi:10.15407/polymerj.47.02.049 · Cited by 1
Antioxidants in biodegradable food packaging polymer materials – a review
Borkowski, M., & Kępka-Borkowska, K. (2025) · Polimery · doi:10.14314/polimery.2025.7.1 · Cited by 3
Research Progress in Nerve Regeneration Based on Polylactic Acid
Wu, Q., Hui, X., & Li, C. (2026) · Tissue Engineering Part B Reviews · doi:10.1177/19373341251370771 · Cited by 3
Efficacy and safety of dermal filler based on poly-D,L-lactic acid
Bychkova, N. Y., Chaikovskaya, E. A., Naumchik, G. A., Zakharov, D. Y., & Kazakov, S. V. (2025) · Plastic Surgery and Aesthetic Medicine · doi:10.17116/plast.hirurgia202503138 · Cited by 1
Wang, X., Liu, P., Chen, X., & Zhou, H. (2025) · Journal of Polymer Science · doi:10.1002/pol.20250867 · Cited by 1
Coelho, C., Taborda, A., Lorena, M., Frazão, T., Veríssimo, A., Borges, P. T., Brissos, V., Tiago, I., & Martins, L. O. (2025) · Applied and Environmental Microbiology · doi:10.1128/aem.01480-25 · Cited by 1
“…and its derivatives (e.g., acetoin, butanol, butyrate, butanediol, and alanine) have a growing demand in the pharmaceutical, cosmetic, and food sectors (13, 14), but suffer from traditional chemical synthesis involving harsh conditions, toxic reagents, and significant energy consumption (15).”
Ghosh, S., Nath, A., & Debnath, K. (2025) · Physica Scripta · doi:10.1088/1402-4896/ae1be7 · Cited by 1
Advances in using biomaterials for repairing thin endometrium
Li, H., Hu, F., Xie, F., Chen, X., & Wu, H. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1697669 · Cited by 1
“…have been widely used in the fi eld of biomedical science in recent years due to their excellent biocompatibility and tunable mechanical properties, including drug delivery, tissue engineering scaffolds, and regenerative medicine (Chen et al., 2023; Li G. et al., 2020; Akhila et al., 2025).”
Biomaterial-assisted neuralization strategies for tissue engineering applications
Ye, J., Ji, L., Liu, L., Zhou, K., Zhu, R., Sun, C., Lei, L., & Dai, M. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102713 · Cited by 4
“Therefore, improving PLA performance through the incorporation of modified additives or mixing with other polymers is essential for successful application in tissue repair and regeneration [111].”
Investigation of the Effects of Nanoclay Additive on the Thermal and Mechanical Properties of PLA
Sarı, M. İ., & Şahin, İ. (2025) · İmalat Teknolojileri ve Uygulamaları · doi:10.52795/mateca.1808873 · Cited by 1
Recent Advances in Biocompatible Dental Materials
Ahmed, M. M. S., Rabbi, S. M. F., Hossen, M. Z., Islam, S., Sarker, M. A. H., Hossain, N., & Chowdhury, M. A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00626-5 · Cited by 3
Fabrication of Peptide Drug Delivery Formulations and Its Characterization Techniques: A Review
Regulagadda, S., Geddam, R., Vasa, T. R. P., Rudhrabatla, V. S. A. P., Thrimurthulu, G., & Padigapati, S. R. (2026) · International Journal of Peptide Research and Therapeutics · doi:10.1007/s10989-025-10798-9 · Cited by 1
Kachalina, P. M., Ковалева, П. А., Cheremnykh, A. I., Statnik, E. S., Senatov, F. S., & Anisimova, N. Y. (2026) · Journal of Polymer Research · doi:10.1007/s10965-026-04785-x · Cited by 1
Klfout, H. A., Alfinaikh, R. S., Alzahrani, A. S., Khan, A., Hussein, M. A., & Alamry, K. A. (2026) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2026.218189 · Cited by 1
Biopolymeric Electrospun Nanofibers for Wound Dressings in Diabetic Patients
Campa-Siqueiros, P. I., Castillo-Ortega, M. M., López‐Cervántes, J., Ayala-Zavala, J. F., de la Mora-López, D. S., & Madera-Santana, T. J. (2022) · Springer eBooks · doi:10.1007/978-3-030-99958-2_9 · Cited by 1
Synthesis, Modification and Application of Polylactic Acid
Han, R., Jiao, S., & Liu, T. (2022) · Highlights in Science Engineering and Technology · doi:10.54097/hset.v26i.3952 · Cited by 2
Stimuli-responsive Biomaterials with Pharmacological Applications
Sánchez‐Velandia, J. E., Valverde, D., Porcar, R., & Villa, A. L. (2023) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9789815136920123030007 · Cited by 1
Compatibility study of Plantago extract and its modified product/PBS antibacterial composites
Jie, S., Han, J., Zhang, R., Dou, Y., Li, S., & Zhang, M. (2023) · Polymer Bulletin · doi:10.1007/s00289-023-04946-8 · Cited by 2
Development of Powered Semi-Active Ankle-Foot Prosthetic with Fuzzy Logic-PI Controller
Ibrahim, K. (2023) · JES. Journal of Engineering Sciences/JES. Journal of engineering sciences · doi:10.21608/jesaun.2023.234785.1257 · Cited by 1
“Ge Li et al. study [3] used a robotic prosthesis with two Inertial Measurement Units (IMUs) and a load-cell to use a cascaded classification technique to discern human locomotor intents.”
Negaresh, M., Javadi, A., & Garmabi, H. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-04098-x · Cited by 1
“However, to further improvement of some properties such as impact strength, PLLA blends with more flexible polymers such as PCL have been developed [11, 12].”
Prashanth, K. P., Rudresh, M., Venkatesh, N., Shivarathri, P. G., & Rajappa, S. (2024) · JOURNAL OF RENEWABLE MATERIALS · doi:10.32604/jrm.2024.055437 · Cited by 2
Master Student in Biomedical Sciences, U. Y., Ernanda, M. H., Damayanti, N. A., Universitas YARSI, J., Sari, W., & Universitas YARSI, J. (2024) · World s Veterinary Journal · doi:10.54203/scil.2024.wvj13 · Cited by 1
Nanocomposites for bone tissue engineering application
Mallick, M., Are, R. P., & Babu, A. R. (2025) · Next research. · doi:10.1016/j.nexres.2025.100261 · Cited by 1
Polylactic Acid/Halloysite Nanotube Bionanocomposite Films for Food Packaging
Emam‐Djomeh, Z., & Hajikhani, M. (2022) · Advanced structured materials · doi:10.1007/978-3-031-13343-5_5 · Cited by 2
Study on Adsorption of Essential Oils on Polylactic Acid Microparticles
Virág, L., Bocsi, R., & Pethő, D. (2022) · Hungarian Journal of Industry and Chemistry · doi:10.33927/hjic-2022-17 · Cited by 1
Pavlov, O. D., Pastukh, V., & Karpinsky, М. Y. (2021) · TRAUMA · doi:10.22141/1608-1706.2.22.2021.231952
SYNTHESIS L-LACTIC ACID FROM FERMENTATION OF CASSAVA PULP BY USING TEMPEH INOCULUM
Nissa, R. C., Sumiarsa, D., Kosasih, W., Firdiana, B., & Abdullah, A. H. D. (2021) · Jurnal Sains Materi Indonesia · doi:10.17146/jsmi.2021.23.1.6265 · Cited by 1
“PLA is a promising material to overcome global pollution caused by conventional plastic [3].”
BackgroundKe, Z.-B., Fan, X., Di, Y., Chen, F., Zhang, L., Yang, K., & Li, B. J. (2021) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2021.132145
Polymer Nanocomposites as Engineered Food Packaging Materials
Yılmaz, T. (2022) · Wiley eBooks · doi:10.1002/9781119819011.ch4
Microcalorimetric Characterization of Polymer Composites Biodegradability
Musuc, A. M., Doni, M. B., & Popa, V. T. (2022) · International Electronic Conference on Processes (ECP) · doi:10.3390/ecp2022-12664
“Studies in the literature reported that the polymers’ biodegradability is started from their amorphous components [12].”
BackgroundBaimark, Y., & Phromsopha, T. (2022) · Asian Journal of Chemistry · doi:10.14233/ajchem.2022.23791
Zapciu, A., Amza, C. G., Ciolacu, M. I., Francalanza, E., & Rauch, E. (2022) · Lecture notes in networks and systems · doi:10.1007/978-3-031-14317-5_3
Krier, M. (2023) · eDiss (Georg-August-Universität Göttingen) · doi:10.53846/goediss-9686
Diseño de un reactor químico de polimerización para la producción de ácido poliláctico
Chavez, A. A. L. (2023) · Revista de Iniciación Científica · doi:10.33412/rev-ric.v9.1.3560 · Cited by 1
Rasouliyan, M., Pirouzi, A., & Nosrati, M. (2023) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.2c00623
FORMA “S” EN LA CURVA CARACTERÍSTICA DE UNA BOMBA CENTRÍFUGA TRABAJANDO COMO TURBINA
Bolaños-Arias, H. D., & Botero-Herrera, F. J. (2023) · doi:10.22533/at.ed.6512330081
Metadata
- Authors
- Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y.
- Affiliations
- Jilin University (CN)
- Corresponding author
- Sun, Fengying
- Li, Youxin
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2020-10-29
- Volume
- 25
- Issue
- 21
- Pages
- 5023
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC7662581
- OpenAlex
- W3096086014
- Cited by
- 492
- References
- 140
- Citations by year
- 2026: 55 · 2025: 115 · 2024: 112 · 2023: 105 · 2022: 71 · 2021: 34
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- People's Government of Jilin Province (20180101269JC)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- polylactic acid, lactic acid, biodegradable polymers, biocompatibility, polymer synthesis, polymer modification, drug delivery, implants, tissue engineering, biodegradation, sugar fermentation
- MeSH terms
- Biocompatible Materials, Humans, Polyesters, Drug Delivery Systems, Prostheses and Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.