Synthesis and Biological Application of Polylactic Acid
Open accessThe DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 9 of the 125 sources its claims cite were checked for support.
Abstract
Over the past few decades, with the development of science and technology, the field of biomedicine has rapidly developed, especially with respect to biomedical materials. Low toxicity and good biocompatibility have always been key targets in the development and application of biomedical materials. As a degradable and environmentally friendly polymer, polylactic acid, also known as polylactide, is favored by researchers and has been used as a commercial material in various studies. Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation. Good biocompatibility and biodegradability have led it to be approved by the U.S. Food and Drug Administration (FDA) as a biomedical material. Polylactic acid has good physical properties, and its modification can optimize its properties to a certain extent. Polylactic acid blocks and blends play significant roles in drug delivery, implants, and tissue engineering to great effect. This article describes the synthesis of polylactic acid (PLA) and its raw materials, physical properties, degradation, modification, and applications in the field of biomedicine. It aims to contribute to the important knowledge and development of PLA in biomedical applications.
Overview
CoChat Summary
TL;DR
This review summarizes polylactic acid (PLA) synthesis, physical properties, degradation, modification, and biomedical applications. It highlights PLA’s biocompatibility and biodegradability while noting challenges in mechanical properties, nanoparticle drug-delivery commercialization, and production cost.
Key findings
- PLA is a biodegradable, biocompatible polymer approved by the FDA for biomedical use; it is made from lactic acid, which is traditionally obtained by sugar fermentation, and exists as PLLA, PDLA, and PDLLA.
- Key properties include processing temperatures of 170–230 °C; PLLA and PDLA melting points of 207 °C; racemic crystals with a melting point of 230 °C and ultimate tensile strength of 50 MPa; a glass transition temperature of 55 °C for PLA of 22,000 g mol−1; and a heat of fusion of 93.7 J g−1 for 100% pure crystals.
- Modification by copolymerization, blending, plasticizers, or crosslinking can improve PLA’s hydrophobicity, toughness, and degradation; examples include PLA–PEG hemoglobin microcapsules reaching a 90% embedding rate versus 7.9% for PLA alone, a PLA–naltrexone complex with 67% in vitro release at 35 days, and PLA–PEG–PLA paclitaxel microspheres with 49% release in one month.
- Biomedical applications include tissue engineering, drug delivery, and implants; PLA-based stents are commercialized, and 3D-printed PLA scaffolds are reported to cause less inflammation, but no PLA nanoparticle has been successfully marketed for drug delivery.
Methods
- Narrative review of PLA synthesis, raw materials, physical properties, degradation, modification, and biomedical applications; no primary experimental data, sample, or systematic search strategy is described.
- Main analysis is qualitative synthesis of cited literature and selected examples, with no meta-analysis or statistical pooling.
Limitations
- The paper states that PLA suffers from brittleness, poor mechanical properties, slow crystallization speed, and low crystallinity; it also states that drug-delivery nanoparticles face challenges including side effects, toxicity, size/position/shape issues, positive-charge cytotoxicity, oxidative stress, DNA damage, ROS-related inflammation, hemolysis risk, complex disease microenvironments, and blood interactions, and that commercialization is limited by price and raw-material production efficiency.
- Evident from the text: as a narrative review, it lacks systematic search/inclusion criteria and quantitative synthesis, and many claims rely on cited secondary literature without new experimental validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Synthesis of polylactic acid (PLA) from l- and d-lactic acids [28]. Adapted from Auras et al. by permission of Wiley–VCH Verlag GmbH & Co. KGaA.](https://figures.cochat.ai/paper-figures/c0c15b60797046e2a98a260168f15ebf/synthesis-and-biological-application-of-polylactic-acid-figure-2.jpg)

![Figure 4 High drug loading and pH-responsivity PLA-g-doxorubicin (DOX) nanoparticles [99]. Reprinted from Cheng with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/f2964f7b6801471a93511477c2ba67d7/synthesis-and-biological-application-of-polylactic-acid-figure-4.jpg)
![Figure 5 Schematic illustration of the concept of stereocomplex hydrogel formed by mixing aqueous solutions of bio-polymers containing enantiomeric oligo(lactic acid) [125]. Reprinted from Nostrum with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/7afa96ad62934c7c95f90c9477ca9c3d/synthesis-and-biological-application-of-polylactic-acid-figure-5.jpg)
Verification
Claims the paper makes
4 Valid · 0 Not valid · 64 Not checked · 10 Own results and interpretations
None of the sources cited for this claim have been checked yet.
In the paper
“The degree of crystallinity affects the degradation of PLA [52,53].”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.3. PLA Properties
What the sources say
- Could not verifycites [52] Li, 2007, Effect of nucleation and plasticization on the crystallization of poly (lactic acid), Polymer sourceExperimental — accuracy not yet measured
The Introduction mentions PLA’s compostability, while §3.4 examines crystallinity during molding and §3.6 examines thermal resistance. None of these passages addresses whether the degree of crystallinity affects PLA degradation; searches for degradation, biodegradation, and hydrolysis found no passage establishing that relationship. Page numbers were not available in our copy. (LLM, conf=0.74)
- Not checked yetcites [53] Liu, 2011, Research Progress in Toughening Modification of Poly (lactic acid), J. Polym. Sci. Part B-Polym. Phys. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
None of the sources cited for this claim have been checked yet.
In the paper
“Su et al. found that, when polylactic acid was used as the membrane material, the embedding rate of hemoglobin was very low, only 7.9%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring, 2015, An analysis of the attrition of drug candidates from four major pharmaceutical companies, Nat. Rev. Drug Discov. source
- Not checked yetcites [88] Langer, 1993, Tissue engineering, Science source
- Could not verifycites [89] Zhang, 2009, Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts, Pharm. Res. sourceExperimental — accuracy not yet measured
Our copy of Zhang et al. (2009) is entirely about octreotide acetate encapsulated in PLGA/PLA microspheres and the inhibition of peptide acylation by water-soluble divalent cationic salts (CaCl2, MnCl2); no passage mentions hemoglobin, a 'Su et al.' work, polylactic acid used as a membrane material, or a 7.9% embedding/encapsulation figure (searched: hemoglobin, Su et al. / 7.9%, encapsulation efficiency and protein loading, poly(lactic acid) membrane). The MATERIAL AND METHODS section ('Drug loading and encapsulation efficiency') reports only octreotide extraction/HPLC assay of microspheres, and the reference list contains no Su entry, so nothing in our copy either supports or contradicts the attributed finding. The decisive part is simply absent from this paper, so the claim cannot be judged against it. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Good biocompatibility also ensures that there is no inflammatory reaction in the surrounding tissue due to rejection after it enters the human body [75,76,77].”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application
What the sources say
- Partly supportedcites [75] Mitragotri, 2014, Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies, Nat. Rev. Drug Discov. sourceExperimental — accuracy not yet measured
The Microparticles section describes PLGA as biocompatible and says it degrades into toxicologically acceptable products. It does not make that claim specifically for PLA or say that biocompatibility ensures no inflammatory reaction or tissue rejection after implantation. (LLM, conf=0.85)
- Partly supportedcites [76] Nottelet, 2015, Aliphatic polyesters for medical imaging and theranostic applications, Eur. J. Pharm. Biopharm. sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) describes aliphatic polyesters as having demonstrated biocompatibility, which supports the general point about PLA. It does not say that PLA entering the human body causes no rejection-related inflammatory reaction in surrounding tissue; that absolute assurance is unsupported. (LLM, conf=0.87)
- Not checked yetcites [77] Tan, 2005, Diversity-oriented synthesis: Exploring the intersections between chemistry and biology, Nat. Chem. Biol. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“When using a polylactic acid–polyethylene glycol copolymer, the embedding rate reached 90%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring, 2015, An analysis of the attrition of drug candidates from four major pharmaceutical companies, Nat. Rev. Drug Discov. source
- Not checked yetcites [88] Langer, 1993, Tissue engineering, Science source
- Could not verifycites [89] Zhang, 2009, Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts, Pharm. Res. sourceExperimental — accuracy not yet measured
The Introduction mentions PLA–PEG formulations only in a discussion of peptide acylation, not a 90% embedding rate. The Materials and Methods section on drug loading and encapsulation efficiency describes measurements of octreotide, not hemoglobin. Searches for hemoglobin and 90% found no passage supporting the claimed result. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Some plasticizers, such as low-molecular-weight citric acid, succinic acid, tartaric acid, and oxalate, are blended with PLA to change its mechanical and thermodynamic properties.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.4. Improvement of PLA Properties
What the sources say
- Not checked yetcites [66] Paul, 2003, New nanocomposite materials based on plasticized poly (l-lactide) and organo-modified montmorillonites: Thermal and morphological study, Polymer source
- Partly supportedcites [67] Paul, 2005, (Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization, Macromol. Chem. Phys. sourceExperimental — accuracy not yet measured
Our copy of Paul et al. (2005) does support the general idea that blending a plasticizer into PLA alters its properties: the 'In situ Polymerization in Presence of PEG' and 'Masterbatch Process' sections state that PLA's brittleness means it 'needs to be plasticized in order to fulfill mechanical requirements', and that 20 wt.-% PEG 1000 lowers the PLA matrix T_g to 26 °C (from 61 °C for nonplasticized chains, 'Clay' section) while raising melting enthalpy to 42.9 J/g; the PEG triblock section reports T_g falling to 41 °C and 12 °C at 8.5 and 16.2 wt.-% PEG. However, none of the specific plasticizers the claim names — citric acid, succinic acid, tartaric acid, oxalate — appear anywhere in our copy (searched: citric, succinic, tartaric, oxalate, low-molecular-weight plasticizer); the only plasticizers treated are PEG 1000 and residual L,L-lactide monomer ('lactide is known to be a good plasticizer for P(L,L-LA)'). Mechanical properties are also invoked only as motivation, not measured. The enumerated acid plasticizers are therefore not supported by this source. (LLM, conf=0.68)
- Not checked yetcites [68] Pluta, 2006, Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties, J. Polym. Sci. Part B-Polym. Phys. source
- Not checked yetcites [69] Tanoue, 2006, Preparation of poly (lactic acid)/poly(ethylene glycol)/organoclay nanocomposites by melt compounding, Polym. Compos. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
31 more claims
Create a free account to see all 78 claims and to verify the 116 references still open.
- It may state two separate claims as one. 25
- Probably not a substantial claim. 22
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, in medicine, PLA can be applied in the areas of bioresorbent implants, surgical sutures, clamps, clips, surgical masks, or dressings [14,87,88,89,90,91].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“This drug delivery system avoids inconsistent local concentration on account of drug release. Thus, the therapeutic effect is enhanced [90].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“In vitro release was 49% in one month, making drug action time in the body longer.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“Since LA is a chiral molecule with d-type and l-type isomers, three forms of polylactic acid are formed: poly-l-lactic acid (PLLA), poly-d-lactic acid (PDLA), and poly-d,l-lactic acid (PDLLA).”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“If l-lactic acid and d,l-lactic acid monomers are used to synthesize PLLA, the above problems are avoided [35,36].”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > Abstract
“Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.1. Lactic Acid
“Chemical synthesis methods have also been applied for the industrial production of lactic acid.”
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Stimuli-responsive nanocarriers for drug delivery
Mura, S., Nicolas, J., & Couvreur, P. (2013) · Nature Materials · doi:10.1038/nmat3776 · Cited by 6,289
A Multicenter, Randomized, Controlled Clinical Trial of Transfusion Requirements in Critical Care
Hébert, P. C., Wells, G., Blajchman, M. A., Marshall, J., Martin, C., Pagliarello, G., Tweeddale, M., Schweitzer, I., & Yetisir, E. (1999) · New England Journal of Medicine · doi:10.1056/nejm199902113400601 · Cited by 5,187
Plant Polyphenols as Dietary Antioxidants in Human Health and Disease
Pandey, K. B., & Rizvi, S. I. (2009) · Oxidative Medicine and Cellular Longevity · doi:10.4161/oxim.2.5.9498 · Cited by 3,942
Weiss, G., & Goodnough, L. T. (2005) · New England Journal of Medicine · doi:10.1056/nejmra041809 · Cited by 3,800
Long-Circulating and Target-Specific Nanoparticles: Theory to Practice
Moghimi, S. M., Hunter, A. C., & Murray, J. C. (2001) · Pharmacological Reviews · doi:10.1016/s0031-6997(24)01494-7 · Cited by 3,515
Denosumab for Prevention of Fractures in Postmenopausal Women with Osteoporosis
Cummings, S. R., Martin, J. S., McClung, M. R., Siris, E. S., Eastell, R., Reid, I. R., Delmas, P., Zoog, H. B., Austin, M., Wang, A., et al. (2009) · New England Journal of Medicine · doi:10.1056/nejmoa0809493 · Cited by 3,489
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · cited 2×
“Synthesis of polylactic acid (PLA) from L‐ and D‐lactic acids [28].”
BackgroundDietary polyphenols and the prevention of diseases
Scalbert, A., Manach, C., Morand, C., Rémésy, C., & Jiménez, L. (2005) · Critical Reviews in Food Science and Nutrition · doi:10.1080/1040869059096 · Cited by 2,999
Biodegradable Long-Circulating Polymeric Nanospheres
Gref, R., Minamitake, Y., Peracchia, M. T., Trubetskoy, V., Torchilin, V., & Langer, R. (1994) · Science · doi:10.1126/science.8128245 · Cited by 2,920
Manolagas, S. C. (2000) · Endocrine Reviews · doi:10.1210/edrv.21.2.0395 · Cited by 2,568
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Liberman, U. A., Weiss, S. R., Bröll, J., Minne, H. W., Quan, H., Bell, N. H., Rodriguez-Portales, J., Downs, R. W., Dequeker, J., Favus, M., et al. (1995) · New England Journal of Medicine · doi:10.1056/nejm199511303332201 · Cited by 2,288
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126 · cited 1×
“Toxicity risk results from consumers’ inability to metabolize their monomers [1,2].”
BackgroundPolymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Biodegradable block copolymers as injectable drug-delivery systems
Jeong, B., Bae, Y. H., Lee, D. S., & Kim, S. W. (1997) · Nature · doi:10.1038/42218 · Cited by 1,997 · cited 2×
“diblock PEG–PLA gel–sol [102] PEG–PLLA gel–sol [102,103] PEG–PLGA gel–sol [103,104] PEG–PLLA/PEG–PDLA gel–sol [105,106]”
Aggarwal, P., Hall, J. B., McLeland, C. B., Dobrovolskaia, M. A., & McNeil, S. E. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.03.009 · Cited by 1,791
Targeted polymeric therapeutic nanoparticles: design, development and clinical translation
Kamaly, N., Xiao, Z., Valencia, P. M., Radovic-Moreno, A. F., & Farokhzad, O. C. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15344k · Cited by 1,730 · cited 1×
“This kind of coating material, combined with target selection achieved through the affinity of the functional group, can quickly target the lesion site with the drug, improve its bioavailability, and reduce its toxic side effects and toxicity to other tissue types [97,98].”
BackgroundOvercoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies
Mitragotri, S., Burke, P. A., & Langer, R. (2014) · Nature Reviews Drug Discovery · doi:10.1038/nrd4363 · Cited by 1,702
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606 · cited 1×
“If L‐lactic acid and D,L‐lactic acid monomers are used to synthesize PLLA, the above problems are avoided [35,36].”
BackgroundNatural fibres as reinforcement in polylactic acid (PLA) composites
Oksman, K., Skrifvars, M., & Selin, J.-F. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00103-9 · Cited by 1,565
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562 · cited 1×
“In terms of nature, polylactic acid possesses good thermoplasticity and can be used to prepare and process plastics in order to make, for example, films and fibers [10,11].”
BackgroundPoly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Athanasiou, K. A., Niederauer, G. G., & Agrawal, C. M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85754-1 · Cited by 1,497 · cited 2×
“Only a few manufacturers use this method due to the expensive raw materials [27].”
BackgroundMethodProperties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461 · cited 1×
“For example, polyglycolic acid has a high melting point (228 °C) and high Tg (37 °C) [64].”
BackgroundAn analysis of the attrition of drug candidates from four major pharmaceutical companies
Waring, M. J., Arrowsmith, J., Leach, A. R., Leeson, P. D., Mandrell, S., Owen, R. M., Pairaudeau, G., Pennie, W. D., Pickett, S. D., Wang, J., et al. (2015) · Nature Reviews Drug Discovery · doi:10.1038/nrd4609 · Cited by 1,450
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366 · cited 1×
“In addition to being used in sutures, PLA is a bioabsorbable material and is widely used in orthopedic surgery [32,73].”
BackgroundGurunathan, T., Mohanty, S., & Nayak, S. K. (2015) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.06.007 · Cited by 1,362 · cited 1×
“The choice of different anion inducers causes deprotonation, resulting in inconsistent polymerization and racemization, leading to polymers with different molecular weights [46].”
BackgroundPoly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360 · cited 1×
“Today, PLA resin has been approved by the FDA and European regulatory authorities for use in food‐ and drug‐delivery systems [12,34].”
MethodNicolas, J., Mura, S., Brambilla, D., Mackiewicz, N., & Couvreur, P. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35265f · Cited by 1,270
Polymerization of Lactide with Zinc and Magnesium β-Diiminate Complexes: Stereocontrol and Mechanism
Chamberlain, B. M., Cheng, M., Moore, D. R., Ovitt, T. M., Lobkovsky, E. B., & Coates, G. W. (2001) · Journal of the American Chemical Society · doi:10.1021/ja003851f · Cited by 1,207
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174 · cited 1×
“However, impurities in the reaction process cannot be degraded in the body, which can cause serious complications in medical applications [40].”
BackgroundNano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033 · cited 1×
“That is to say, in the natural environment, it is not easy for plastics to spontaneously be completely degraded, especially in the face of large‐ scale use of plastic film coverings and packaging, which generate a large amount of waste and cause serious pollution and damage to the ecosystem [3].”
BackgroundRecent advances in lactic acid production by microbial fermentation processes
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.002 · Cited by 1,022 · cited 1×
“The degradation of polylactic acid is contingent on many factors, including time, temperature, low‐molecular‐weight impurities, and catalyst concentration [27,55,56].”
BackgroundPoly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941 · cited 1×
“As the simplest hydroxy acid, there is an asymmetric carbon atom in the molecule that is optically active, so there are two optical isomers, L‐lactic acid and D‐lactic acid, as shown in Figure 1 [21,22].”
BackgroundMathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851 · cited 1×
“Although later studies found that new chain extenders could replace the esterification of the above-mentioned adjuvants, there is still the problem that chain extenders and polymer impurities are toxic and nonbiodegradable [41].”
BackgroundDischer, D. E., & Ahmed, F. (2006) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.8.061505.095838 · Cited by 844
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810 · cited 1×
“The degree of crystallinity affects the degradation of PLA [52,53].”
BackgroundManufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767 · cited 1×
“low Tg and flexibility may be more suitable for use in implantable medical devices and drug-delivery systems [42,62,63].”
BackgroundResearch progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767 · cited 1×
“The degree of crystallinity affects the degradation of PLA [52,53].”
BackgroundCarrasco, F., Pagès, P., Gámez-Pérez, J., Santana, O. O., & Maspoch, M. L. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.11.045 · Cited by 738
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710 · cited 1×
“mesolactic acid and low‐molecular polymer through recrystallization to obtain pure L‐ or D, L‐lactide with high molecular weight [9,43,44].”
BackgroundMechanical properties of kenaf fibers and kenaf/PLA composites
Ochi, S. (2008) · Mechanics of Materials · doi:10.1016/j.mechmat.2007.10.006 · Cited by 708 · cited 1×
“uses a reduced pressure– reflux method to remove residual water, lactic acid, oligomers, and partial lactide [45].”
MethodHuda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.06.022 · Cited by 699
Impact and tensile properties of PLA/Cordenka and PLA/flax composites
Bax, B., & Müssig, J. (2008) · Composites Science and Technology · doi:10.1016/j.compscitech.2008.01.004 · Cited by 637 · cited 1×
“mesolactic acid and low‐molecular polymer through recrystallization to obtain pure L‐ or D, L‐lactide with high molecular weight [9,43,44].”
BackgroundThermoreversible Gelation of PEG−PLGA−PEG Triblock Copolymer Aqueous Solutions
Jeong, B., Bae, Y. H., & Kim, S. W. (1999) · Macromolecules · doi:10.1021/ma9908999 · Cited by 619
Suryanegara, L., Nakagaito, A. N., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.02.022 · Cited by 617
Graupner, N., Herrmann, A. S., & Müssig, J. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.04.003 · Cited by 608
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Diversity-oriented synthesis: Exploring the intersections between chemistry and biology
Tan, D. S. (2005) · Nature Chemical Biology · doi:10.1038/nchembio0705-74 · Cited by 605
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2011) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2011.06.017 · Cited by 596 · cited 1×
“Given the problem of global pollution, focusing on improving the environment is a win– win situation; thus, it is considered the most promising biodegradable polymer material on the market [6,7].”
BackgroundPreparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583 · cited 3×
“mesolactic acid and low‐molecular polymer through recrystallization to obtain pure L‐ or D, L‐lactide with high molecular weight [9,43,44].”
BackgroundMethodFortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L. A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.066 · Cited by 581
Ordered Nanoporous Polymers from Polystyrene−Polylactide Block Copolymers
Zalusky, A. S., Olayo-Valles, R., Wolf, J. H., & Hillmyer, M. A. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0278584 · Cited by 553
Biodegradable nanoparticles for cytosolic delivery of therapeutics
VASIR, J., & LABHASETWAR, V (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.06.003 · Cited by 526
Controlled Polymerization of Next-Generation Renewable Monomers and Beyond
Yao, K., & Tang, C. (2013) · Macromolecules · doi:10.1021/ma3019574 · Cited by 485 · cited 1×
“In the beginning, commercial lactic acid was mainly derived from the fermentation of sugars by bacteria [23].”
BackgroundPaul, M.-A., Alexandre, M., Degée, P., Henrist, C., Rulmont, A., & Dubois, P. (2003) · Polymer · doi:10.1016/s0032-3861(02)00778-4 · Cited by 480
A holistic approach to targeting disease with polymeric nanoparticles
Cheng, C. J., Tietjen, G. T., Saucier-Sawyer, J. K., & Saltzman, W. M. (2015) · Nature Reviews Drug Discovery · doi:10.1038/nrd4503 · Cited by 480 · cited 1×
“Therefore, targeted drug systems are worthy of study [96].”
BackgroundVascularized 3D printed scaffolds for promoting bone regeneration
Yan, Y., Chen, H., Zhang, H., Guo, C., Yang, K., Chen, K., Cheng, R., Qian, N., Sandler, N., Zhang, Y. S., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.033 · Cited by 475
Liu, Z., Wang, Y., Wu, B., Cui, C., Guo, Y., & Yan, C. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03332-x · Cited by 469
Vaz, C. M., van Tuijl, S., Bouten, C. V. C., & Baaijens, F. P. T. (2005) · Acta Biomaterialia · doi:10.1016/j.actbio.2005.06.006 · Cited by 459 · cited 1×
“low Tg and flexibility may be more suitable for use in implantable medical devices and drug-delivery systems [42,62,63].”
BackgroundRay, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454 · cited 2×
“Lactide has three stereo configurations—l-lactide, mesolactide, and d-lactide—as shown in Figure 3 [42].”
Backgroundde Jong, S. J., Arias, E. R., Rijkers, D. T. S., van Nostrum, C. F., Kettenes-van den Bosch, J. J., & Hennink, W. E. (2001) · Polymer · doi:10.1016/s0032-3861(00)00646-7 · Cited by 414 · cited 1×
“Supposing polylactic acid is mainly degraded by hydrolysis, the degradation of polylactide is divided into two stages: the nonenzymatic melting of ester groups and the random scission of low‐molecular‐weight polymers by microorganisms to produce carbon dioxide and water [58,59].”
BackgroundNew polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Zhang, Q., Re Ko, N., & Kwon Oh, J. (2012) · Chemical Communications · doi:10.1039/c2cc32408c · Cited by 395
Direct lactic acid fermentation: Focus on simultaneous saccharification and lactic acid production
John, R. P., G.S., A., Nampoothiri, K. M., & Pandey, A. (2009) · Biotechnology Advances · doi:10.1016/j.biotechadv.2008.10.004 · Cited by 286 · cited 1×
“In terms of nature, polylactic acid possesses good thermoplasticity and can be used to prepare and process plastics in order to make, for example, films and fibers [10,11].”
BackgroundA Subtle End‐Group Effect on Macroscopic Physical Gelation of Triblock Copolymer Aqueous Solutions
Yu, L., Zhang, H., & Ding, J. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503575 · Cited by 279
Abdel-Rahman, M. A., & Sonomoto, K. (2016) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2016.08.008 · Cited by 236 · cited 1×
“Although lactic acid, the monomer of polylactic acid, can be easily obtained in nature, it is traditionally produced by the fermentation of sugars and conversion into monomers after hydrolysis [8].”
BackgroundLee, D. S., Shim, M. S., Kim, S. W., Lee, H., Park, I., & Chang, T. (2001) · Macromolecular Rapid Communications · doi:10.1002/1521-3927(20010501)22:8<587::aid-marc587>3.0.co;2-8 · Cited by 227
Characterization of the degradation of polylactic acid polymer in a solid substrate environment
Agarwal, M., Koelling, K. W., & Chalmers, J. J. (1998) · Biotechnology Progress · doi:10.1021/bp980015p · Cited by 212 · cited 1×
“The degradation of polylactic acid is contingent on many factors, including time, temperature, low‐molecular‐weight impurities, and catalyst concentration [27,55,56].”
BackgroundZhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Polymeric worm micelles as nano-carriers for drug delivery
Kim, Y., Dalhaimer, P., Christian, D. A., & Discher, D. E. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/7/024 · Cited by 207
Thermogelling Biodegradable Polymers with Hydrophilic Backbones: PEG-g-PLGA
Jeong, B., Kibbey, M. R., Birnbaum, J. C., Won, Y.-Y., & Gutowska, A. (2000) · Macromolecules · doi:10.1021/ma000638v · Cited by 193
Targeted delivery of paclitaxel using folate-decorated poly(lactide)-vitamin E TPGS nanoparticles
Pan, J., & Feng, S.-S. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.02.020 · Cited by 187 · cited 1×
“used PLA copolymers to prepare PLA–PEG–PLA microspheres containing paclitaxel [90,91].”
MethodKinetics of the hydrolytic degradation of poly(lactic acid)
Codari, F., Lazzari, S., Soos, M., Storti, G., Morbidelli, M., & Moscatelli, D. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.026 · Cited by 184 · cited 1×
“Supposing polylactic acid is mainly degraded by hydrolysis, the degradation of polylactide is divided into two stages: the nonenzymatic melting of ester groups and the random scission of low‐molecular‐weight polymers by microorganisms to produce carbon dioxide and water [58,59].”
BackgroundCatalytic upgrading of fermentation-derived organic acids
Varadarajan, S., & Miller, D. J. (1999) · Biotechnology Progress · doi:10.1021/bp9900965 · Cited by 184 · cited 1×
“It plays a vital role in the glycolytic energy cycle in organisms, as well as being an important substance for maintaining the growth and development of living organisms [20].”
BackgroundLactic acid production from waste sugarcane bagasse derived cellulose
Adsul, M. G., Varma, A. J., & Gokhale, D. V. (2007) · Green Chem. · doi:10.1039/b605839f · Cited by 164 · cited 1×
“Polylactic acid (PLA) is a kind of lactic acid (LA) derivative produced from renewable resources such as wheat, straw, corn, and sorghum, and it is completely biodegradable [4,5].”
BackgroundPEGylation strategies for active targeting of PLA/PLGA nanoparticles
Betancourt, T., Byrne, J. D., Sunaryo, N., Crowder, S. W., Kadapakkam, M., Patel, S., Casciato, S., & Brannon‐Peppas, L. (2009) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32247 · Cited by 148
Poly(lactic acid)-based particulate systems are promising tools for immune modulation
Peres, C., Matos, A. I., Conniot, J., Sainz, V., Zupančič, E., Silva, J. M., Graça, L., Gaspar, R. S., Préat, V., & Florindo, H. F. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.012 · Cited by 135 · cited 1×
“However, due to the high cost of synthesis and poor product stability, this synthesis was not considered a success [33].”
BackgroundHennink, W. E., de Jong, S. J., Bos, G. W., Veldhuis, T. F. J., & van Nostrum, C. F. (2004) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2003.02.002 · Cited by 134
Yu, Y., Chen, C.-K., Law, W.-C., Weinheimer, E., Sengupta, S., Prasad, P. N., & Cheng, C. (2014) · Biomacromolecules · doi:10.1021/bm401471p · Cited by 134 · cited 2×
“High drug loading and pH‐responsivity PLA‐g‐doxorubicin (DOX) nanoparticles [99].”
BackgroundFibrinogen-coated albumin microcapsules reduce bleeding in severely thrombocytopenic rabbits
Levi, M. M., Friederich, P. W., Middleton, S., de Groot, P. G., Wu, Y., Harris, R. E., Biemond, B. J., Heijnen, H. F. G., Levin, J., & ten Cate, J. W. (1999) · Nature Medicine · doi:10.1038/4795 · Cited by 130
Pluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20694 · Cited by 127
New concepts in the design of drug-eluting coronary stents
Garg, S., Bourantas, C., & Serruys, P. W. (2013) · Nature Reviews Cardiology · doi:10.1038/nrcardio.2013.13 · Cited by 125
Mansouri, S., Merhi, Y., Winnik, F. M., & Tabrizian, M. (2011) · Biomacromolecules · doi:10.1021/bm101200c · Cited by 124
Fukushima, K., & Kimura, Y. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22712 · Cited by 120 · cited 1×
“0) and low oxygen at a temperature of about 40 °C [24].”
Background(Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization
Paul, M., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., Rulmont, A., & Dubois, P. (2005) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200400324 · Cited by 115
Shao, W., He, J., Han, Q., Sang, F., Wang, Q., Chen, L., Cui, S., & Ding, B. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.05.081 · Cited by 114
Micellization and Gelation of Aqueous Solutions of Star-Shaped PLLA−PEO Block Copolymers
Park, S. Y., Han, B. R., Na, K. M., Han, D. K., & Kim, S. C. (2003) · Macromolecules · doi:10.1021/ma021639l · Cited by 105
Lee, J., Bae, Y. H., Sohn, Y. S., & Jeong, B. (2006) · Biomacromolecules · doi:10.1021/bm0600062 · Cited by 101
Lampe, K. J., Namba, R. M., Silverman, T. R., Bjugstad, K. B., & Mahoney, M. J. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22352 · Cited by 98 · cited 1×
“Subsequently, ultrafiltration, dyeing, and electrodialysis were developed as new processes for the low‐cost production of lactic acid [26].”
BackgroundGrande, R., & Carvalho, A. J. F. (2011) · Biomacromolecules · doi:10.1021/bm101227q · Cited by 96 · cited 1×
“In the next section, we focus on applying PLA in the biomedical field [74].”
d-(−)-Lactic acid production from cellobiose and cellulose by Lactobacillus lactis mutant RM2-24
Singhvi, M., Joshi, D., Adsul, M., Varma, A., & Gokhale, D. (2010) · Green Chemistry · doi:10.1039/b925975a · Cited by 95
Matsumoto, K., & Taguchi, S. (2010) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-2374-0 · Cited by 86 · cited 1×
“However, not many references are available for this method [47].”
Disease, destination, dose and delivery aspects of ciclosporin: the state of the art
Italia, J. L., Bhardwaj, V., & Kumar, M. N. V. R. (2006) · Drug Discovery Today · doi:10.1016/j.drudis.2006.07.015 · Cited by 85
Chang, T. M. S., Powanda, D., & Yu, W. P. (2003) · Artificial Cells Blood Substitutes and Biotechnology · doi:10.1081/bio-120023155 · Cited by 82 · cited 1×
“Microcapsules can encapsulate animal hemoglobin [82,83].”
Controlling Degradation Rate of Poly (lactic acid) for Its Biomedical Applications
Shasteen, C., & Choy, Y. B. (2011) · Biomedical Engineering Letters · doi:10.1007/s13534-011-0025-8 · Cited by 81
Dong, Y., & Feng, S. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30684 · Cited by 81 · cited 1×
“used PLA copolymers to prepare PLA–PEG–PLA microspheres containing paclitaxel [90,91].”
MethodPark, S. Y., Han, D. K., & Kim, S. C. (2001) · Macromolecules · doi:10.1021/ma010789d · Cited by 77
Mukose, T., Fujiwara, T., Nakano, J., Taniguchi, I., Miyamoto, M., Kimura, Y., Teraoka, I., & Woo Lee, C. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200300112 · Cited by 73
Tang, Z., Zhang, L., Wang, Y., Li, D., Zhong, Z., & Zhou, S. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.06.038 · Cited by 73
Enzymatic synthesis of poly-l-lactide and poly-l-lactide-co-glycolide in an ionic liquid
Chanfreau, S., Mena, M., Porras-Domínguez, J. R., Ramírez-Gilly, M., Gimeno, M., Roquero, P., Tecante, A., & Bárzana, E. (2010) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-009-0388-8 · Cited by 72 · cited 1×
“As the simplest hydroxy acid, there is an asymmetric carbon atom in the molecule that is optically active, so there are two optical isomers, L‐lactic acid and D‐lactic acid, as shown in Figure 1 [21,22].”
BackgroundAliphatic polyesters for medical imaging and theranostic applications
Nottelet, B., Darcos, V., & Coudane, J. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.06.023 · Cited by 68
Abdel-Rahman, M. A., Tashiro, Y., Zendo, T., & Sonomoto, K. (2013) · RSC Advances · doi:10.1039/c3ra00078h · Cited by 67 · cited 1×
“Given the problem of global pollution, focusing on improving the environment is a win– win situation; thus, it is considered the most promising biodegradable polymer material on the market [6,7].”
BackgroundGollwitzer, H., Thomas, P., Diehl, P., Steinhauser, E., Summer, B., Barnstorf, S., Gerdesmeyer, L., Mittelmeier, W., & Stemberger, A. (2005) · Journal of Orthopaedic Research · doi:10.1016/j.orthres.2005.02.003 · Cited by 67
Pluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20697 · Cited by 66
Chang, T. M. S. (2012) · Artificial Cells Blood Substitutes and Biotechnology · doi:10.3109/10731199.2012.662408 · Cited by 63 · cited 1×
“Microcapsules can encapsulate animal hemoglobin [82,83].”
Zhao, J., Mi, Y., Liu, Y., & Feng, S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.11.051 · Cited by 61 · cited 1×
“At the same time, the process of treatment requires multiple and frequent administrations [95].”
BackgroundMao, H., Shan, G., Bao, Y., Wu, Z. L., & Pan, P. (2016) · Soft Matter · doi:10.1039/c6sm00517a · Cited by 57
Salt-induced reentrant hydrogel of poly(ethylene glycol)–poly(lactide-co-glycolide) block copolymers
Li, T., Ci, T., Chen, L., Yu, L., & Ding, J. (2013) · Polymer Chemistry · doi:10.1039/c3py01107k · Cited by 55
Fabrication of a Biodegradable Implant with Tunable Characteristics for Bone Implant Applications
Manavitehrani, I., Fathi, A., Wang, Y., Maitz, P. K., Mirmohseni, F., Cheng, T. L., Peacock, L., Little, D. G., Schindeler, A., & Dehghani, F. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00078 · Cited by 55
Kim, M. S., Seo, K. S., Khang, G., Cho, S. H., & Lee, H. B. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20430 · Cited by 52
Deng, K., Chen, H., Zhao, Y., Zhou, Y., Wang, Y., & Sun, Y. (2018) · PLOS ONE · doi:10.1371/journal.pone.0201777 · Cited by 52
New properties from PLA–PEO–PLA hydrogels
Tew, G. N., Sanabria-DeLong, N., Agrawal, S. K., & Bhatia, S. R. (2005) · Soft Matter · doi:10.1039/b509800a · Cited by 51
Synthesis and Rheological Properties of Polylactide/Poly(ethylene glycol) Multiblock Copolymers
Li, F., Li, S., & Vert, M. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500143 · Cited by 51
Gritsch, L., Conoscenti, G., La Carrubba, V., Nooeaid, P., & Boccaccini, A. R. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.09.038 · Cited by 51 · cited 1×
“At present, there is a general theory that the phenomenon resulting in PLA degradation is the process of simple proton‐catalyzed hydrolysis chain scission [57].”
BackgroundInhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts
Zhang, Y., Sophocleous, A. M., & Schwendeman, S. P. (2009) · Pharmaceutical Research · doi:10.1007/s11095-009-9914-2 · Cited by 49
Tanoue, S., Hasook, A., Iemoto, Y., & Unryu, T. (2006) · Polymer Composites · doi:10.1002/pc.20174 · Cited by 48 · cited 1×
“Adding PEG (polyethylene glycol) to the polylactic acid/MMT blend produces more agglomerated structures, and the elongation at break of the material remains below 5% [69].”
Gelation of PEO−PLGA−PEO Triblock Copolymers Induced by Macroscopic Phase Separation
Park, M. J., & Char, K. (2004) · Langmuir · doi:10.1021/la035573e · Cited by 47
Studies of in situ‐forming hydrogels by blending PLA‐PEG‐PLA copolymer with silk fibroin solution
Zhong, T., Deng, C., Gao, Y., Chen, M., & Zuo, B. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.33307 · Cited by 39 · cited 1×
“The phase-change phenomenon during the heating process takes place as described in Table 1 [100,101].”
Lipase-Catalyzed Degradation of Polyester in Supercritical Carbon Dioxide
Takamoto, T., Uyama, H., & Kobayashi, S. (2001) · Macromolecular Bioscience · doi:10.1002/1616-5195(20010701)1:5<215::aid-mabi215>3.0.co;2-9 · Cited by 37
Lee, H. T., & Lee, D. S. (2002) · Macromolecular Research · doi:10.1007/bf03218330 · Cited by 36
Mansouri, S., Fatisson, J., Miao, Z., Merhi, Y., Winnik, F. M., & Tabrizian, M. (2009) · Langmuir · doi:10.1021/la9016799 · Cited by 31
Synthesis and reduction-responsive disassembly of PLA-based mono-cleavable micelles
Cunningham, A. J., Ko, N. R., & Oh, J. K. (2014) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.08.002 · Cited by 31 · cited 1×
“The phase-change phenomenon during the heating process takes place as described in Table 1 [100,101].”
Conville, C. M., Major, I., Friend, D. R., Clark, M. R., Woolfson, A. D., & Malcolm, K. R. (2012) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31919 · Cited by 27
Nouailhas, H., Ghzaoui, A. E., Li, S., & Coudane, J. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33896 · Cited by 23
Synthesis of Poly(L(+) Lactic Acid) by Polycondensation Method in Solution
Dutkiewicz, S., Grochowska-Łapienis, D., & Tomaszewski, W. (2003) · Fibres and Textiles in Eastern Europe · Cited by 23
Hiemstra, C., Zhong, Z., Jiang, X., Hennink, W. E., Dijkstra, P. J., & Feijén, J. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.09.027 · Cited by 22
Damage-induced hydrolyses modelling of biodegradable polymers for tendons and ligaments repair
Vieira, A. C., Guedes, R. M., & Tita, V. (2015) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2015.05.025 · Cited by 20 · cited 1×
“In addition to being used in sutures, PLA is a bioabsorbable material and is widely used in orthopedic surgery [32,73].”
BackgroundNouailhas, H., Li, F., El Ghzaoui, A., Li, S., & Coudane, J. (2010) · Polymer International · doi:10.1002/pi.2831 · Cited by 17
Prabhakar, M. N., Sudhakara, P., Subha, M. C. S., Rao, K. C., & Song, J. I. (2015) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1010212 · Cited by 10
Wehmöller, M., Neuking, K., Epple, M., Annen, T., & Eufinger, H. (2006) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200600006 · Cited by 7
Chemical Recycling Technology of Polylactic Acid/talc—Application into Agricultural Materials—
TSUKEGI, T., NAGASAWA, N., HORII, T., & NISHIDA, H. (2015) · KOBUNSHI RONBUNSHU · doi:10.1295/koron.2015-0008 · Cited by 4
Anakhu, P. I., Bolu, C. A., Abioye, A. A., Onyiagha, G., Boyo, H., Jolayemi, K. J., & Azeta, J. (2018) · Archives of Foundry Engineering · doi:10.24425/122504 · Cited by 3
Agrawal (1997) · doi:10.1002/(sici)1097-4636(199722)38:2<105::aid-jbm4>3.0.co;2-u
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Research works printed but not linked: 2
- Bud, 1993, A history of lactic-acid making–A chapter in the history of biotechnology-benninga,h, Ann. Sci., 50, 597
- Fujiwara, 2001, Novel thermo-responsive formation of a hydrogel by stereo-complexation between PLLA-PEG-PLLA and PDLA-PEG-PDLA block copolymers, Macromol. Biosci., 1, 204, 10.1002/1616-5195(20010701)1:5 · doi:10.1002/1616-5195(20010701)1:5
Cited by
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
“So, this method is employed only if the polymer of low molecular weight is required [34].”
BackgroundMethodInfluentialDas, A., Ringu, T., Ghosh, S., & Pramanik, N. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04443-4 · Cited by 380
Organic acids production from lactic acid bacteria: A preservation approach
Punia Bangar, S., Suri, S., Trif, M., & Ozogul, F. (2022) · Food Bioscience · doi:10.1016/j.fbio.2022.101615 · Cited by 336
3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
Strategies for Bone Regeneration: From Graft to Tissue Engineering
Battafarano, G., Rossi, M., De Martino, V., Marampon, F., Borro, L., Secinaro, A., & Del Fattore, A. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031128 · Cited by 295
“Non-toxic and FDA approved synthetic polymers include: PLA (polylactic acid) and PGA (polyglycolic acid), showing the best mechanical properties, being non-inflammatory, biocompatible and biodegradable and supporting cell adhesion [72,73]; biodegradable PLGA (polylactic co-glycolic acid), providing support for cell ad…”
Background
Metadata
- Authors
- Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y.
- Affiliations
- Jilin University (CN)
- Corresponding author
- Sun, Fengying
- Li, Youxin
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2020-10-29
- Volume
- 25
- Issue
- 21
- Pages
- 5023
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC7662581
- OpenAlex
- W3096086014
- Cited by
- 492
- References
- 140
- Citations by year
- 2026: 55 · 2025: 115 · 2024: 112 · 2023: 105 · 2022: 71 · 2021: 34
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- People's Government of Jilin Province (20180101269JC)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- polylactic acid, lactic acid, biodegradable polymers, biocompatibility, polymer synthesis, polymer modification, drug delivery, implants, tissue engineering, biodegradation, sugar fermentation
- MeSH terms
- Biocompatible Materials, Humans, Polyesters, Drug Delivery Systems, Prostheses and Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.