Synthesis and Biological Application of Polylactic Acid
Open accessThe DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 9 of the 125 sources its claims cite were checked for support.
Abstract
Over the past few decades, with the development of science and technology, the field of biomedicine has rapidly developed, especially with respect to biomedical materials. Low toxicity and good biocompatibility have always been key targets in the development and application of biomedical materials. As a degradable and environmentally friendly polymer, polylactic acid, also known as polylactide, is favored by researchers and has been used as a commercial material in various studies. Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation. Good biocompatibility and biodegradability have led it to be approved by the U.S. Food and Drug Administration (FDA) as a biomedical material. Polylactic acid has good physical properties, and its modification can optimize its properties to a certain extent. Polylactic acid blocks and blends play significant roles in drug delivery, implants, and tissue engineering to great effect. This article describes the synthesis of polylactic acid (PLA) and its raw materials, physical properties, degradation, modification, and applications in the field of biomedicine. It aims to contribute to the important knowledge and development of PLA in biomedical applications.
Overview
CoChat Summary
TL;DR
This review summarizes polylactic acid (PLA) synthesis, physical properties, degradation, modification, and biomedical applications. It highlights PLA’s biocompatibility and biodegradability while noting challenges in mechanical properties, nanoparticle drug-delivery commercialization, and production cost.
Key findings
- PLA is a biodegradable, biocompatible polymer approved by the FDA for biomedical use; it is made from lactic acid, which is traditionally obtained by sugar fermentation, and exists as PLLA, PDLA, and PDLLA.
- Key properties include processing temperatures of 170–230 °C; PLLA and PDLA melting points of 207 °C; racemic crystals with a melting point of 230 °C and ultimate tensile strength of 50 MPa; a glass transition temperature of 55 °C for PLA of 22,000 g mol−1; and a heat of fusion of 93.7 J g−1 for 100% pure crystals.
- Modification by copolymerization, blending, plasticizers, or crosslinking can improve PLA’s hydrophobicity, toughness, and degradation; examples include PLA–PEG hemoglobin microcapsules reaching a 90% embedding rate versus 7.9% for PLA alone, a PLA–naltrexone complex with 67% in vitro release at 35 days, and PLA–PEG–PLA paclitaxel microspheres with 49% release in one month.
- Biomedical applications include tissue engineering, drug delivery, and implants; PLA-based stents are commercialized, and 3D-printed PLA scaffolds are reported to cause less inflammation, but no PLA nanoparticle has been successfully marketed for drug delivery.
Methods
- Narrative review of PLA synthesis, raw materials, physical properties, degradation, modification, and biomedical applications; no primary experimental data, sample, or systematic search strategy is described.
- Main analysis is qualitative synthesis of cited literature and selected examples, with no meta-analysis or statistical pooling.
Limitations
- The paper states that PLA suffers from brittleness, poor mechanical properties, slow crystallization speed, and low crystallinity; it also states that drug-delivery nanoparticles face challenges including side effects, toxicity, size/position/shape issues, positive-charge cytotoxicity, oxidative stress, DNA damage, ROS-related inflammation, hemolysis risk, complex disease microenvironments, and blood interactions, and that commercialization is limited by price and raw-material production efficiency.
- Evident from the text: as a narrative review, it lacks systematic search/inclusion criteria and quantitative synthesis, and many claims rely on cited secondary literature without new experimental validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Synthesis of polylactic acid (PLA) from l- and d-lactic acids [28]. Adapted from Auras et al. by permission of Wiley–VCH Verlag GmbH & Co. KGaA.](https://figures.cochat.ai/paper-figures/c0c15b60797046e2a98a260168f15ebf/synthesis-and-biological-application-of-polylactic-acid-figure-2.jpg)

![Figure 4 High drug loading and pH-responsivity PLA-g-doxorubicin (DOX) nanoparticles [99]. Reprinted from Cheng with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/f2964f7b6801471a93511477c2ba67d7/synthesis-and-biological-application-of-polylactic-acid-figure-4.jpg)
![Figure 5 Schematic illustration of the concept of stereocomplex hydrogel formed by mixing aqueous solutions of bio-polymers containing enantiomeric oligo(lactic acid) [125]. Reprinted from Nostrum with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/7afa96ad62934c7c95f90c9477ca9c3d/synthesis-and-biological-application-of-polylactic-acid-figure-5.jpg)
Verification
Claims the paper makes
4 Valid · 0 Not valid · 64 Not checked · 10 Own results and interpretations
None of the sources cited for this claim have been checked yet.
In the paper
“The degree of crystallinity affects the degradation of PLA [52,53].”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.3. PLA Properties
What the sources say
- Could not verifycites [52] Li H. Huneault M.A. Effect of nucleation and plasticization on the crystallization of poly (lactic acid) Polymer 2007 48 6855 6866 10.1016/j.polymer.2007.09.020 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA’s compostability, while §3.4 examines crystallinity during molding and §3.6 examines thermal resistance. None of these passages addresses whether the degree of crystallinity affects PLA degradation; searches for degradation, biodegradation, and hydrolysis found no passage establishing that relationship. Page numbers were not available in our copy. (LLM, conf=0.74)
- Not checked yetcites [53] Liu H. Zhang J. Research Progress in Toughening Modification of Poly (lactic acid) J. Polym. Sci. Part B-Polym. Phys. 2011 49 1051 1083 10.1002/polb.22283 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
None of the sources cited for this claim have been checked yet.
In the paper
“Su et al. found that, when polylactic acid was used as the membrane material, the embedding rate of hemoglobin was very low, only 7.9%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
Our copy of Zhang et al. (2009) is entirely about octreotide acetate encapsulated in PLGA/PLA microspheres and the inhibition of peptide acylation by water-soluble divalent cationic salts (CaCl2, MnCl2); no passage mentions hemoglobin, a 'Su et al.' work, polylactic acid used as a membrane material, or a 7.9% embedding/encapsulation figure (searched: hemoglobin, Su et al. / 7.9%, encapsulation efficiency and protein loading, poly(lactic acid) membrane). The MATERIAL AND METHODS section ('Drug loading and encapsulation efficiency') reports only octreotide extraction/HPLC assay of microspheres, and the reference list contains no Su entry, so nothing in our copy either supports or contradicts the attributed finding. The decisive part is simply absent from this paper, so the claim cannot be judged against it. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Good biocompatibility also ensures that there is no inflammatory reaction in the surrounding tissue due to rejection after it enters the human body [75,76,77].”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application
What the sources say
- Partly supportedcites [75] Mitragotri S. Burke P.A. Langer R. Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies Nat. Rev. Drug Discov. 2014 13 655 672 10.1038/nrd4363 25103255 PMC4455970 sourceExperimental — accuracy not yet measured
The Microparticles section describes PLGA as biocompatible and says it degrades into toxicologically acceptable products. It does not make that claim specifically for PLA or say that biocompatibility ensures no inflammatory reaction or tissue rejection after implantation. (LLM, conf=0.85)
- Partly supportedcites [76] Nottelet B. Darcos V. Coudane J. Aliphatic polyesters for medical imaging and theranostic applications Eur. J. Pharm. Biopharm. 2015 97 350 370 10.1016/j.ejpb.2015.06.023 26614557 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) describes aliphatic polyesters as having demonstrated biocompatibility, which supports the general point about PLA. It does not say that PLA entering the human body causes no rejection-related inflammatory reaction in surrounding tissue; that absolute assurance is unsupported. (LLM, conf=0.87)
- Not checked yetcites [77] Tan D.S. Diversity-oriented synthesis: Exploring the intersections between chemistry and biology Nat. Chem. Biol. 2005 1 74 84 10.1038/nchembio0705-74 16408003 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“When using a polylactic acid–polyethylene glycol copolymer, the embedding rate reached 90%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA–PEG formulations only in a discussion of peptide acylation, not a 90% embedding rate. The Materials and Methods section on drug loading and encapsulation efficiency describes measurements of octreotide, not hemoglobin. Searches for hemoglobin and 90% found no passage supporting the claimed result. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Some plasticizers, such as low-molecular-weight citric acid, succinic acid, tartaric acid, and oxalate, are blended with PLA to change its mechanical and thermodynamic properties.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.4. Improvement of PLA Properties
What the sources say
- Not checked yetcites [66] Paul M.A. Alexandre M. Degee P. Henrist C. Rulmont A. Dubois P. New nanocomposite materials based on plasticized poly (l-lactide) and organo-modified montmorillonites: Thermal and morphological study Polymer 2003 44 443 450 10.1016/S0032-3861(02)00778-4 source
- Partly supportedcites [67] Paul M.A. Delcourt C. Alexandre M. Degee P. Monteverde F. Rulmont A. Dubois P. (Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization Macromol. Chem. Phys. 2005 206 484 498 10.1002/macp.200400324 sourceExperimental — accuracy not yet measured
Our copy of Paul et al. (2005) does support the general idea that blending a plasticizer into PLA alters its properties: the 'In situ Polymerization in Presence of PEG' and 'Masterbatch Process' sections state that PLA's brittleness means it 'needs to be plasticized in order to fulfill mechanical requirements', and that 20 wt.-% PEG 1000 lowers the PLA matrix T_g to 26 °C (from 61 °C for nonplasticized chains, 'Clay' section) while raising melting enthalpy to 42.9 J/g; the PEG triblock section reports T_g falling to 41 °C and 12 °C at 8.5 and 16.2 wt.-% PEG. However, none of the specific plasticizers the claim names — citric acid, succinic acid, tartaric acid, oxalate — appear anywhere in our copy (searched: citric, succinic, tartaric, oxalate, low-molecular-weight plasticizer); the only plasticizers treated are PEG 1000 and residual L,L-lactide monomer ('lactide is known to be a good plasticizer for P(L,L-LA)'). Mechanical properties are also invoked only as motivation, not measured. The enumerated acid plasticizers are therefore not supported by this source. (LLM, conf=0.68)
- Not checked yetcites [68] Pluta M. Paul M.A. Alexandre M. Dubois P. Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties J. Polym. Sci. Part B-Polym. Phys. 2006 44 299 311 10.1002/polb.20694 source
- Not checked yetcites [69] Tanoue S. Hasook A. Iemoto Y. Unryu T. Preparation of poly (lactic acid)/poly(ethylene glycol)/organoclay nanocomposites by melt compounding Polym. Compos. 2006 27 256 263 10.1002/pc.20174 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
31 more claims
Create a free account to see all 78 claims and to verify the 116 references still open.
- It may state two separate claims as one. 25
- Probably not a substantial claim. 22
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, in medicine, PLA can be applied in the areas of bioresorbent implants, surgical sutures, clamps, clips, surgical masks, or dressings [14,87,88,89,90,91].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“This drug delivery system avoids inconsistent local concentration on account of drug release. Thus, the therapeutic effect is enhanced [90].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“In vitro release was 49% in one month, making drug action time in the body longer.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“Since LA is a chiral molecule with d-type and l-type isomers, three forms of polylactic acid are formed: poly-l-lactic acid (PLLA), poly-d-lactic acid (PDLA), and poly-d,l-lactic acid (PDLLA).”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“If l-lactic acid and d,l-lactic acid monomers are used to synthesize PLLA, the above problems are avoided [35,36].”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > Abstract
“Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.1. Lactic Acid
“Chemical synthesis methods have also been applied for the industrial production of lactic acid.”
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Stimuli-responsive nanocarriers for drug delivery
Mura, S., Nicolas, J., & Couvreur, P. (2013) · Nature Materials · doi:10.1038/nmat3776 · Cited by 6,289
A Multicenter, Randomized, Controlled Clinical Trial of Transfusion Requirements in Critical Care
Hébert, P. C., Wells, G., Blajchman, M. A., Marshall, J., Martin, C., Pagliarello, G., Tweeddale, M., Schweitzer, I., & Yetisir, E. (1999) · New England Journal of Medicine · doi:10.1056/nejm199902113400601 · Cited by 5,187
Plant Polyphenols as Dietary Antioxidants in Human Health and Disease
Pandey, K. B., & Rizvi, S. I. (2009) · Oxidative Medicine and Cellular Longevity · doi:10.4161/oxim.2.5.9498 · Cited by 3,942
Weiss, G., & Goodnough, L. T. (2005) · New England Journal of Medicine · doi:10.1056/nejmra041809 · Cited by 3,800
Long-Circulating and Target-Specific Nanoparticles: Theory to Practice
Moghimi, S. M., Hunter, A. C., & Murray, J. C. (2001) · Pharmacological Reviews · doi:10.1016/s0031-6997(24)01494-7 · Cited by 3,515
Denosumab for Prevention of Fractures in Postmenopausal Women with Osteoporosis
Cummings, S. R., Martin, J. S., McClung, M. R., Siris, E. S., Eastell, R., Reid, I. R., Delmas, P., Zoog, H. B., Austin, M., Wang, A., et al. (2009) · New England Journal of Medicine · doi:10.1056/nejmoa0809493 · Cited by 3,489
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · cited 2×
“Synthesis of polylactic acid (PLA) from L‐ and D‐lactic acids [28].”
BackgroundDietary polyphenols and the prevention of diseases
Scalbert, A., Manach, C., Morand, C., Rémésy, C., & Jiménez, L. (2005) · Critical Reviews in Food Science and Nutrition · doi:10.1080/1040869059096 · Cited by 2,999
Biodegradable Long-Circulating Polymeric Nanospheres
Gref, R., Minamitake, Y., Peracchia, M. T., Trubetskoy, V., Torchilin, V., & Langer, R. (1994) · Science · doi:10.1126/science.8128245 · Cited by 2,920
Research works printed but not linked: 1
- Bud R. A history of lactic-acid making–A chapter in the history of biotechnology-benninga,h Ann. Sci. 1993 50 597
Cited by
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
“So, this method is employed only if the polymer of low molecular weight is required [34].”
BackgroundMethodInfluentialDas, A., Ringu, T., Ghosh, S., & Pramanik, N. (2023) · Polymer Bulletin · doi:10.1007/s00289-022-04443-4 · Cited by 380
Organic acids production from lactic acid bacteria: A preservation approach
Punia Bangar, S., Suri, S., Trif, M., & Ozogul, F. (2022) · Food Bioscience · doi:10.1016/j.fbio.2022.101615 · Cited by 336
3D printing of polylactic acid: recent advances and opportunities
Joseph, T. M., Kallingal, A., Suresh, A. M., Mahapatra, D. K., Hasanin, M. S., Haponiuk, J., & Thomas, S. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10795-y · Cited by 313
Strategies for Bone Regeneration: From Graft to Tissue Engineering
Battafarano, G., Rossi, M., De Martino, V., Marampon, F., Borro, L., Secinaro, A., & Del Fattore, A. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22031128 · Cited by 295
“Non-toxic and FDA approved synthetic polymers include: PLA (polylactic acid) and PGA (polyglycolic acid), showing the best mechanical properties, being non-inflammatory, biocompatible and biodegradable and supporting cell adhesion [72,73]; biodegradable PLGA (polylactic co-glycolic acid), providing support for cell ad…”
BackgroundA Comprehensive Review of Nanoparticles: From Classification to Application and Toxicity
Eker, F., Duman, H., Akdaşçi, E., Bolat, E., Sarıtaş, S., Karav, S., & Witkowska, A. M. (2024) · Molecules · doi:10.3390/molecules29153482 · Cited by 249
Fused deposition modeling of thermoplastic elastomeric materials: Challenges and opportunities
Awasthi, P., & Banerjee, S. S. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102177 · Cited by 222
Phiri, R., Mavinkere Rangappa, S., Siengchin, S., Oladijo, O. P., & Dhakal, H. N. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.04.004 · Cited by 211
Boey, J. Y., Mohamad, L., Khok, Y. S., Tay, G. S., & Baidurah, S. (2021) · Polymers · doi:10.3390/polym13101544 · Cited by 211
Shekhar, N., & Mondal, A. (2024) · Polymer Bulletin · doi:10.1007/s00289-024-05252-7 · Cited by 174
“PLA is widely regarded as the most promising biodegradable polymer in the market [5].”
Eldeeb, A. E., Salah, S., & Elkasabgy, N. A. (2022) · AAPS PharmSciTech · doi:10.1208/s12249-022-02419-1 · Cited by 167
Plamadiala, I., Croitoru, C., Pop, M. A., & Roata, I. C. (2025) · Polymers · doi:10.3390/polym17020191 · Cited by 165
PLA bioplastic production: From monomer to the polymer
Yu, J., Xu, S., Liu, B., Wang, H., Qiao, F., Ren, X., & Wei, Q. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112076 · Cited by 167
Anwer, A. H., Ahtesham, A., Shoeb, M., Mashkoor, F., Ansari, M. Z., Zhu, S., & Jeong, C. (2023) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2023.102955 · Cited by 162
Electrospun nanofiber scaffold for vascular tissue engineering
Rickel, A. P., Deng, X., Engebretson, D. S., & Hong, Z. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112373 · Cited by 171
“Lactide ROP pathway is the most practiced method in the industrial setting to produce high molecular weight PLA, and polymers can be accustomed to achieving specific properties through the controlled ROP method [39].”
BackgroundMethodInfluentialNanotechnology Advances in the Detection and Treatment of Cancer: An Overview
Mosleh-Shirazi, S., Abbasi, M., Moaddeli, M. R., Vaez, A., Shafiee, M., Kasaee, S. R., Amani, A. M., & Hatam, S. (2022) · Nanotheranostics · doi:10.7150/ntno.74613 · Cited by 181
“For instance, the FDA accepts environmentally friendly polymer-based nanostructures like PLGA and PLA for human use [78, 82].”
BackgroundCurrent Trends and Future Perspectives of Nanomaterials in Food Packaging Application
Chadha, U., Bhardwaj, P., Selvaraj, S. K., Arasu, K., Praveena, S., Pavan, A., Khanna, M., Singh, P., Singh, S., Chakravorty, A., et al. (2022) · Journal of Nanomaterials · doi:10.1155/2022/2745416 · Cited by 157
RetractedFarjaminejad, S., Farjaminejad, R., & García-Godoy, F. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15090241 · Cited by 134
Functional biomaterials for osteoarthritis treatment: From research to application
Yang, L., Zhang, Q., Kuang, G., Wang, X., Fan, Q., & Ye, F. (2022) · Smart Medicine · doi:10.1002/smmd.20220014 · Cited by 125
Polylactic acid (PLA) membrane—significance, synthesis, and applications: a review
More, N., Avhad, M. S., Utekar, S., & More, A. P. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04135-z · Cited by 129
Medical applications and prospects of polylactic acid materials
Yang, Z., Yin, G., Sun, S., & Xu, P. (2024) · iScience · doi:10.1016/j.isci.2024.111512 · Cited by 136
Zhao, X., Li, N., Zhang, Z., Hong, J., Zhang, X., Hao, Y., Wang, J., Xie, Q., Zhang, Y., Li, H., et al. (2024) · Journal of Nanobiotechnology · doi:10.1186/s12951-024-02759-z · Cited by 141
“Moreover, brittle nanoparticles may be enzymatically degraded once they enter the bloodstream, or they may undergo immune rejection through protein adsorption and aggregation [80].”
Backgroundde França, J. O. C., Valadares, D. D. S., Paiva, M. F., Dias, S. C. L., & Dias, J. A. (2022) · Polymers · doi:10.3390/polym14122317 · Cited by 122
“The main disadvantages of this synthesis lie in the use of diols and diacids as solvents, catalyst residue and low yields [29,78].”
BackgroundMethodInfluentialGreen Copolymers Based on Poly(Lactic Acid)—Short Review
Stefaniak, K., & Masek, A. (2021) · Materials · doi:10.3390/ma14185254 · Cited by 109
Eco-friendly innovations in food packaging: A sustainable revolution
Khandeparkar, A. S., Paul, R., Sridhar, A., Lakshmaiah, V. V., & Nagella, P. (2024) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2024.101579 · Cited by 157
Challenges Associated with the Production of Nanofibers
Maduna, L., & Patnaik, A. (2024) · Processes · doi:10.3390/pr12102100 · Cited by 109
Idris, S. N., Amelia, T. S. M., Bhubalan, K., Lazim, A. M. M., Zakwan, N. A. M. A., Jamaluddin, M. I., Santhanam, R. K., Amirul, A.-A. A., Vigneswari, S., & Ramakrishna, S. (2023) · Environmental Research · doi:10.1016/j.envres.2023.115988 · Cited by 126
Bio-Based and Biodegradable Polymeric Materials for a Circular Economy
Oliver-Cuenca, V., Salaris, V., Muñoz-Gimena, P. F., Agüero, Á., Peltzer, M. A., Alcázar, V., Arrieta, M. P., Sempere‐Torregrosa, J., Pavón, C., Samper, M. D., et al. (2024) · Polymers · doi:10.3390/polym16213015 · Cited by 129
Mehmood, A., Raina, N., Phakeenuya, V., Wonganu, B., & Cheenkachorn, K. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.387 · Cited by 122
Yue, S., Zhang, T., Wang, S., Han, D., Huang, S., Xiao, M., & Meng, Y. (2024) · Nanomaterials · doi:10.3390/nano14040338 · Cited by 109
Andrade, M. A., Barbosa, C. H., Cerqueira, M. Â., Azevedo, A. G., Barros, C., Machado, A. V., Coelho, A., Furtado, R., Correia, C. B., Saraiva, M., et al. (2022) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2023.101041 · Cited by 102
Huang, S., Xue, Y., Yu, B., Wang, L., Zhou, C., & Ma, Y. (2021) · Molecules · doi:10.3390/molecules26216446 · Cited by 103
“PLA is traditionally synthesized by bio-chemical hybrid process (Figure 2a), in which optical pure L-lactic acid or D-lactic acid as the monomer of PLA firstly is produced by microbial fermentation from renewable resources such as wheat, straw, corn, and sorghum [10], and then PLA is synthesized via the ring opening p…”
MethodThe Potential Applications of Reinforced Bioplastics in Various Industries: A Review
Kong, U., Rawi, N. F. M., & Tay, G. S. (2023) · Polymers · doi:10.3390/polym15102399 · Cited by 105
“The direct condensation method required two steps, which is hydroxyl and carboxyl groups dehydration condensation to acquire low molecular weight (MW) PLA, followed by addition of esterification adjuvants and coupling agents in order to amplify the chain and modify PLA [17].”
BackgroundMethodInfluentialNian, L., Wang, M., Sun, X., Zeng, Y., Xie, Y. G., Cheng, S., & Cao, C. (2022) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2022.2122924 · Cited by 99
“It has been found that α-CD-MOFs can slowly release stored ethylene to achieve the ripening of bananas (Li et al. 2020d).”
BackgroundBiodegradation Properties of Cellulose Fibers and PLA Biopolymer
Brunšek, R., Kopitar, D., Schwarz, I. G., & Marasović, P. (2023) · Polymers · doi:10.3390/polym15173532 · Cited by 90
“The degradation of PLA in the biological environment is divided into two steps: the non-enzymatic melting of ester groups and the random degradation of polymer chains of low molecular weight by microbes to produce carbon dioxide and water [25].”
BackgroundProduction methods and applications of bioactive polylactic acid: a review
Ferreira, P. S., Ribeiro, S. M., Pontes, R., & Nunes, J. (2024) · Environmental Chemistry Letters · doi:10.1007/s10311-024-01729-z · Cited by 91
“This method efficiently removes water from the reaction medium, by using an organic solvent, forming an azeotrope with water without the need of chain extenders or adjuvants (Li et al. 2020).”
Chen, J., Guo, Z., Zhao, Y., Zhou, M., Zhong, A., & Sun, J. (2022) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-022-00439-w · Cited by 86
Wang, L., Peng, Y., Xu, Y., Zhang, J., Zhang, T., Yan, M., & Sun, H. (2022) · Environmental Science & Technology · doi:10.1021/acs.est.2c02221 · Cited by 81
Nduko, J. M., & Taguchi, S. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.618077 · Cited by 94
“Polylactic acid is one of the most promising biodegradable and biocompatible aliphatic thermoplastic with extensive mechanical property profile (Li et al., 2020).”
BackgroundPoly(lactic acid)-Based Blends: A Comprehensive Review
ВАЙШБЕЙН, Л. И., Mastalygina, E. E., Olkhov, A. A., & Podzorova, M. V. (2023) · Applied Sciences · doi:10.3390/app13085148 · Cited by 83
What Are “Bioplastics”? Defining Renewability, Biosynthesis, Biodegradability, and Biocompatibility
Lackner, M. K., Mukherjee, A., & Koller, M. (2023) · Polymers · doi:10.3390/polym15244695 · Cited by 110
Pourhajibagher, M., Pourakbari, B., & Bahador, A. (2022) · BMC Microbiology · doi:10.1186/s12866-022-02438-9 · Cited by 75
“poly (L-lactic acid) is one of the most successfully used biodegradable polymers for drug delivery system and produce the non-toxic biodegradable metabolite monomers following its hydrolysis within the body [29].”
BackgroundApplication of Non-Viral Vectors in Drug Delivery and Gene Therapy
Ren, S., Wang, M., Wang, C., Wang, Y., Sun, C., Zeng, Z., Cui, H., & Zhao, X. (2021) · Polymers · doi:10.3390/polym13193307 · Cited by 76
Shergill, K., Chen, Y., & Bull, S. J. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11270-y · Cited by 64
Malafaia, G., Nascimento, Í. F., Estrela, F. N., Guimarães, A. T. B., Ribeiro, F., da Luz, T. M., & Rodrigues, A. S. D. L. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.146994 · Cited by 64
RetractedFrom fruit and vegetable waste to degradable bioplastic films and advanced materials: A review
Li, H., Zhou, M., Mohammed, A. E. A. Y., Chen, L., & Zhou, C. (2022) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2022.100859 · Cited by 78
A road map on synthetic strategies and applications of biodegradable polymers
Meghana, M. C., Nandhini, C., Benny, L., George, L., & Varghese, A. (2022) · Polymer Bulletin · doi:10.1007/s00289-022-04565-9 · Cited by 69
“Direct condensation Drug delivery, Fertilizer delivery, Tissue engineering and Biosensors [59]”
Chiral macromolecules and supramolecular assemblies: Synthesis, properties and applications
Zhang, M., Kim, M., Choi, J.-Y., Choi, J., Kim, D. H., Liu, Y., & Lin, Z. (2024) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2024.101800 · Cited by 56
Syed, M. H., Zahari, M. A. K. M., Khan, M. M. R., Beg, M. D. H., & Abdullah, N. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.104121 · Cited by 64
Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation
Rahmati, F., Sethi, D., Shu, W., Lajayer, B. A., Mosaferi, M., Thomson, A., & Price, G. W. (2024) · Chemosphere · doi:10.1016/j.chemosphere.2024.141749 · Cited by 61
Li, J., Lin, H. T., Li, J., & Wang, Y. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16121562 · Cited by 62
“…with good biocompatibility and PLA is a synthetic biodegradable polymer with good biocompatibility and biodegradability, which has been approved by the FDA for clinical use as a medical material [28]. biodegradability, which has been approved the FDA for clinical use as a medical material [28].”
Fang, H., Zhang, L., Chen, A., & Wu, F. (2022) · Polymers · doi:10.3390/polym14081530 · Cited by 55
“However, the environmental pollution and rapid consumption of fossil fuels caused by the extensive use of petroleum-based polymers and improper treatment have become a global environmental problem [1,2].”
BackgroundMethodNanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications
Domingues, J., Miranda, C. S., Homem, N. C., Felgueiras, H. P., & Antunes, J. C. (2023) · Biomedicines · doi:10.3390/biomedicines11071862 · Cited by 63
Synthetic polymers as bone engineering scaffold
Javid‐Naderi, M. J., Behravan, J., Karimi‐Hajishohreh, N., & Toosi, S. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6046 · Cited by 53
Gulati, S., Ansari, N., Moriya, Y., Joshi, K., Prasad, D., Sajwan, G., Shukla, S., Kumar, S., & Varma, R. S. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00599f · Cited by 52
Biodegradable Polyesters: Approaches to Increase Degradation Rates for Biomedical Applications
Roberts, C. T., & Grunlan, M. A. (2025) · ACS Macro Letters · doi:10.1021/acsmacrolett.5c00417 · Cited by 58
Srivastava, A., Bhati, P., Singh, S., Agrawal, M., Kumari, N., Vashisth, P., Chauhan, P., & Bhatnagar, N. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26626 · Cited by 52
Tan, C., Tao, F., & Xu, P. (2022) · Green Chemistry · doi:10.1039/d1gc04188f · Cited by 49
Pyrolysis of 3D printed polylactic acid waste: A kinetic study via TG-FTIR/GC-MS analysis
Zhang, F., Sun, Y., Li, J., Su, H., Zhu, Z., Yan, B., Cheng, Z., & Chen, G. (2022) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2022.105631 · Cited by 47
Zhang, S., Fang, H., & Tian, H. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c01193 · Cited by 55
Polymeric Nanoparticles and Nanogels: How Do They Interact with Proteins?
Sadeghi, A., PourEskandar, S., Askari, E., & Akbari, M. (2023) · Gels · doi:10.3390/gels9080632 · Cited by 47
“Additionally, the salting-out (SO) process has been used, which involves separating a water-miscible solvent from an aqueous solution using a salting-out agent like magnesium chloride or calcium chloride [51].”
MethodSilva, R. O., Counil, H., Rabanel, J., Haddad, M., Zaouter, C., Khedher, M. R. B., Patten, S. A., & Ramassamy, C. (2024) · International Journal of Nanomedicine · doi:10.2147/ijn.s449227 · Cited by 53
Polymer-Based Wound Dressings Loaded with Essential Oil for the Treatment of Wounds: A Review
Buriti, B. M. A. B., Figueiredo, P. L. B., Passos, M. F., & da Silva, J. K. R. (2024) · Pharmaceuticals · doi:10.3390/ph17070897 · Cited by 57
Construction of vascular grafts based on tissue-engineered scaffolds
Lang, Z., Chen, T., Zhu, S., Wu, X., Wu, Y., Miao, X., Wang, Q., Zhao, L., Zhu, Z., & Xu, R. X. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101336 · Cited by 59
Enzymatic Polymerization as a Green Approach to Synthesizing Bio-Based Polyesters
Gkountela, C. I., & Vouyiouka, S. (2022) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol2010003 · Cited by 51
“However, when PLA is conventionally produced—via direct condensation polymerization, azeotropic dehydration condensation or lactide ringopening polymerization (ROP) [16]—either impurities or catalyst residues (organometallic, cationic, organic or bifunctional [17]) unavoidably remain in the final product, making it in…”
BackgroundInfluentialSakpal, D., Gharat, S., & Momin, M. M. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.213124 · Cited by 46
Reshma, C. S., Remya, S., & Bindu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.137905 · Cited by 57
Next-Generation Bioplastics for Food Packaging: Sustainable Materials and Applications
Shi, X., Cui, L., Xu, C., & Wu, S. (2025) · Materials · doi:10.3390/ma18122919 · Cited by 58
Fredi, G., Rigotti, D., Bikiaris, D. Ν., & Dorigato, A. (2021) · Polymer · doi:10.1016/j.polymer.2021.123527 · Cited by 43
Composite fibrous membrane comprising PLA and PCL fibers for biomedical application
Zhang, S., Yan, D., Zhao, L., & Lin, J. (2022) · Composites Communications · doi:10.1016/j.coco.2022.101268 · Cited by 43
Mishra, D. K., Giri, J. P., Sathish, T., Kanan, M., & Prajapati, D. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.104488 · Cited by 41
What controls layer thickness effects on the mechanical properties of additive manufactured polymers
Shergill, K., Chen, Y., & Bull, S. J. (2023) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.130131 · Cited by 39
Rise of implantable drugs: A chronicle of breakthroughs in drug delivery systems
Huanbutta, K., Puri, V., Sharma, A., Singh, I., Sriamornsak, P., & Sangnim, T. (2024) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2024.102193 · Cited by 42
“Several biodegradable polymers, such as PLA (Da Silva et al., 2018), PGA (Li et al., 2020), and polycaprolactone (Yang et al., 2022), have been investigated by scientists to create IDDSs with distinct features (Table 1).”
InfluentialPorous carbon derived from biomass-based polymers: Innovative applications in supercapacitors
Lv, Q., Tian, Z., Li, W., Duan, G., Han, X., Zhang, C., He, S., Mao, H., Ma, C., & Jiang, S. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.110860 · Cited by 51
Advances in Wearable Sensors for Health Management: From Advanced Materials to Intelligent Systems
Song, S., Zhang, M., Gong, X., Shi, S., Fang, J. H., & Wang, X. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202518767 · Cited by 64
Mou, L., Li, J., Lu, Y., Li, G., & Li, J. (2025) · Journal of Hazardous Materials Advances · doi:10.1016/j.hazadv.2025.100757 · Cited by 72
Self-citationAdvances in biomaterials for wound care management: Insights from recent developments
Joshi, S., Maan, M., Barman, P., Sharely, I., Verma, K., Preet, S., & Saini, A. (2025) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2025.103563 · Cited by 46
Fire Behavior of Wood-Based Composite Materials
Renner, J. S., Mensah, R. A., Jiang, L., Xu, Q., Das, O., & Berto, F. (2021) · Polymers · doi:10.3390/polym13244352 · Cited by 43
“The production of PLA polymer is quite cheap and has made it possible to use in a wide range of applications, especially in electronics, chemical, biomedical field, manufacturing of fabrics, etc. [115,117,118].”
Hui, I., Pasquier, E., Solberg, A., Agrenius, K., Håkansson, J., & Chinga‐Carrasco, G. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.106136 · Cited by 40
Wu, T., Wu, H., Wang, Q., He, X., Shi, P., Yu, B., Cong, H., & Shen, Y. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103317 · Cited by 33
Han, X.-X., Huang, L., Wei, Z., Wang, Y., Chen, H., Huang, C., & Su, S. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114065 · Cited by 35
Jumadi, J., Harun, W. S. W., Kadirgama, K., Samylingam, L., Aslfattahi, N., Clint, K. S., Kok, C. K., & Kiai, M. S. (2025) · BioNanoScience · doi:10.1007/s12668-025-02233-6 · Cited by 45
“…[20] with permission from American Chemical Society). b Various synthesis methods employed to produce high molecular weight PLA (reproduced from [21] with permission from MDPI). c A plot of mass remaining versus degradation time for PLGA films subjected to degradation in 20 mL of phosphate…”
Wang, Y., Wu, J., Koning, C. E., & Wang, H. (2022) · Green Chemistry · doi:10.1039/d2gc02608b · Cited by 35
Biodegradable Polymers in Veterinary Medicine—A Review
Broda, M., Yelle, D. J., & Leja, K. (2024) · Molecules · doi:10.3390/molecules29040883 · Cited by 34
“The monomers are produced from fermented plant starch sourced from sugarcane, corn, or sugar beet pulp and exist in two enantiomeric forms of L and D isomers, where L-isomer is a dominant form produced in fermentation processes [151–153].”
BackgroundPLA-Based Biodegradable Polymer from Synthesis to the Application
Wi, J., Choi, J., & Lee, S. Y. (2025) · Polymers · doi:10.3390/polym18010121 · Cited by 40
“PEG is a polymer with flexible chains, high hydrophilicity, and excellent biocompatibility, and has been widely used as a comonomer to introduce soft segments into intrinsically brittle PLA to increase elongation at break and toughness and to impart moisture affinity [139].”
Modified Biomass-Reinforced Polylactic Acid Composites
Zhu, J., Sun, H., Yang, B., & Weng, Y. (2024) · Materials · doi:10.3390/ma17020336 · Cited by 33
Self-citationYan, D., Zhang, S., Yu, F., Gong, D., Lin, J., Yao, Q., & Fu, Y. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118341 · Cited by 32
Nonkrathok, W., Trongsatitkul, T., & Suppakarn, N. (2022) · Polymers · doi:10.3390/polym14183923 · Cited by 30
“Poly(lactic acid) (PLA) is a well-known biodegradable polyester with a wide range of applications, particularly in medical fields, due to its good mechanical strength, high biocompatibility, and nontoxicity [17,18].”
BackgroundHydrogel-Based 3D Bioprinting Technology for Articular Cartilage Regenerative Engineering
Zhang, H., Zhou, Z., Zhang, F., & Wan, C. (2024) · Gels · doi:10.3390/gels10070430 · Cited by 38
Advancements in the application of biomaterials in neural tissue engineering: A review
Hammam, I. A., Winters, R. D., & Hong, Z. (2024) · Biomedical Engineering Advances · doi:10.1016/j.bea.2024.100132 · Cited by 38
Zhu, S., Dou, W., Zeng, X., Chen, X., Gao, Y., Liu, H., & Li, S. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms25105249 · Cited by 28
“Polyurethane (PU) is characterized by the presence of urethane bonds and can be easily synthesized by addition reactions between alcohols and isocyanates [193].”
BackgroundTao, Y., Zhang, Y., Xia, T., & Lin, N. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400380 · Cited by 31
A comparative study of 3D printing with virgin and recycled polylactic acid filaments
Wei, X., & Bähr, R. (2024) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2024.08.007 · Cited by 32
A review on biopolymer-derived electrospun nanofibers for biomedical and antiviral applications
Deshmukh, S., Kathiresan, M., & Kulandainathan, M. A. (2022) · Biomaterials Science · doi:10.1039/d2bm00820c · Cited by 29
Wu, Y., Hao, X., Lin, F., Wang, S., Chen, L., Lin, X., Gan, D., Fan, S., Song, L., & Liu, Y. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.08.082 · Cited by 29
Zhang, G., Li, L., Jiang, W., Han, X., Hu, Y., Han, Y., Zhao, G., & Feng, Y. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112764 · Cited by 30
Olivito, F., Algieri, V., Jiritano, A., Tallarida, M. A., Costanzo, P., Maiuolo, L., & Nino, A. D. (2023) · Polymers · doi:10.3390/polym15071785 · Cited by 29
Unveiling the potential of biomaterials and their synergistic fusion in tissue engineering
Armengol, E. S., Hock, N., Saribal, S., To, D., Summonte, S., Veider, F., Kali, G., Bernkop‐Schnürch, A., & Laffleur, F. (2024) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2024.106761 · Cited by 31
“• bacterial polymer Synthetic Scaffolds • Synthetic polymers offer customizable properties, with degradation rate regulation possible through factors like chemical composition and molecular weight (Li et al., 2020; Liu et al., 2020).”
Biopolymers: a comprehensive review of sustainability, environmental impact, and lifecycle analysis
Kogje, M., Satdive, A. M., Mestry, S. U., & Mhaske, S. T. (2025) · Iranian Polymer Journal · doi:10.1007/s13726-024-01449-9 · Cited by 40
“Figure 4 [58, 60] provides routes of synthesis of PLA.”
Can‐Herrera, L. A., Oliva, A. I., & Cervantes‐Uc, J. M. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25949 · Cited by 26
Metadata
- Authors
- Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y.
- Affiliations
- Jilin University (CN)
- Corresponding author
- Sun, Fengying
- Li, Youxin
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2020-10-29
- Volume
- 25
- Issue
- 21
- Pages
- 5023
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC7662581
- OpenAlex
- W3096086014
- Cited by
- 492
- References
- 140
- Citations by year
- 2026: 55 · 2025: 115 · 2024: 112 · 2023: 105 · 2022: 71 · 2021: 34
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- People's Government of Jilin Province (20180101269JC)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- polylactic acid, lactic acid, biodegradable polymers, biocompatibility, polymer synthesis, polymer modification, drug delivery, implants, tissue engineering, biodegradation, sugar fermentation
- MeSH terms
- Biocompatible Materials, Humans, Polyesters, Drug Delivery Systems, Prostheses and Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.