Synthesis and Biological Application of Polylactic Acid
Open accessThe DOI matches its Crossref record; 140 of the 140 references it cites were found in a registry or an index; 9 of the 125 sources its claims cite were checked for support.
Abstract
Over the past few decades, with the development of science and technology, the field of biomedicine has rapidly developed, especially with respect to biomedical materials. Low toxicity and good biocompatibility have always been key targets in the development and application of biomedical materials. As a degradable and environmentally friendly polymer, polylactic acid, also known as polylactide, is favored by researchers and has been used as a commercial material in various studies. Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation. Good biocompatibility and biodegradability have led it to be approved by the U.S. Food and Drug Administration (FDA) as a biomedical material. Polylactic acid has good physical properties, and its modification can optimize its properties to a certain extent. Polylactic acid blocks and blends play significant roles in drug delivery, implants, and tissue engineering to great effect. This article describes the synthesis of polylactic acid (PLA) and its raw materials, physical properties, degradation, modification, and applications in the field of biomedicine. It aims to contribute to the important knowledge and development of PLA in biomedical applications.
Overview
CoChat Summary
TL;DR
This review summarizes polylactic acid (PLA) synthesis, physical properties, degradation, modification, and biomedical applications. It highlights PLA’s biocompatibility and biodegradability while noting challenges in mechanical properties, nanoparticle drug-delivery commercialization, and production cost.
Key findings
- PLA is a biodegradable, biocompatible polymer approved by the FDA for biomedical use; it is made from lactic acid, which is traditionally obtained by sugar fermentation, and exists as PLLA, PDLA, and PDLLA.
- Key properties include processing temperatures of 170–230 °C; PLLA and PDLA melting points of 207 °C; racemic crystals with a melting point of 230 °C and ultimate tensile strength of 50 MPa; a glass transition temperature of 55 °C for PLA of 22,000 g mol−1; and a heat of fusion of 93.7 J g−1 for 100% pure crystals.
- Modification by copolymerization, blending, plasticizers, or crosslinking can improve PLA’s hydrophobicity, toughness, and degradation; examples include PLA–PEG hemoglobin microcapsules reaching a 90% embedding rate versus 7.9% for PLA alone, a PLA–naltrexone complex with 67% in vitro release at 35 days, and PLA–PEG–PLA paclitaxel microspheres with 49% release in one month.
- Biomedical applications include tissue engineering, drug delivery, and implants; PLA-based stents are commercialized, and 3D-printed PLA scaffolds are reported to cause less inflammation, but no PLA nanoparticle has been successfully marketed for drug delivery.
Methods
- Narrative review of PLA synthesis, raw materials, physical properties, degradation, modification, and biomedical applications; no primary experimental data, sample, or systematic search strategy is described.
- Main analysis is qualitative synthesis of cited literature and selected examples, with no meta-analysis or statistical pooling.
Limitations
- The paper states that PLA suffers from brittleness, poor mechanical properties, slow crystallization speed, and low crystallinity; it also states that drug-delivery nanoparticles face challenges including side effects, toxicity, size/position/shape issues, positive-charge cytotoxicity, oxidative stress, DNA damage, ROS-related inflammation, hemolysis risk, complex disease microenvironments, and blood interactions, and that commercialization is limited by price and raw-material production efficiency.
- Evident from the text: as a narrative review, it lacks systematic search/inclusion criteria and quantitative synthesis, and many claims rely on cited secondary literature without new experimental validation.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2 Synthesis of polylactic acid (PLA) from l- and d-lactic acids [28]. Adapted from Auras et al. by permission of Wiley–VCH Verlag GmbH & Co. KGaA.](https://figures.cochat.ai/paper-figures/c0c15b60797046e2a98a260168f15ebf/synthesis-and-biological-application-of-polylactic-acid-figure-2.jpg)

![Figure 4 High drug loading and pH-responsivity PLA-g-doxorubicin (DOX) nanoparticles [99]. Reprinted from Cheng with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/f2964f7b6801471a93511477c2ba67d7/synthesis-and-biological-application-of-polylactic-acid-figure-4.jpg)
![Figure 5 Schematic illustration of the concept of stereocomplex hydrogel formed by mixing aqueous solutions of bio-polymers containing enantiomeric oligo(lactic acid) [125]. Reprinted from Nostrum with permission from Express Polymer Letters.](https://figures.cochat.ai/paper-figures/7afa96ad62934c7c95f90c9477ca9c3d/synthesis-and-biological-application-of-polylactic-acid-figure-5.jpg)
Verification
Claims the paper makes
4 Valid · 0 Not valid · 64 Not checked · 10 Own results and interpretations
None of the sources cited for this claim have been checked yet.
In the paper
“The degree of crystallinity affects the degradation of PLA [52,53].”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.3. PLA Properties
What the sources say
- Could not verifycites [52] Li H. Huneault M.A. Effect of nucleation and plasticization on the crystallization of poly (lactic acid) Polymer 2007 48 6855 6866 10.1016/j.polymer.2007.09.020 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA’s compostability, while §3.4 examines crystallinity during molding and §3.6 examines thermal resistance. None of these passages addresses whether the degree of crystallinity affects PLA degradation; searches for degradation, biodegradation, and hydrolysis found no passage establishing that relationship. Page numbers were not available in our copy. (LLM, conf=0.74)
- Not checked yetcites [53] Liu H. Zhang J. Research Progress in Toughening Modification of Poly (lactic acid) J. Polym. Sci. Part B-Polym. Phys. 2011 49 1051 1083 10.1002/polb.22283 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
None of the sources cited for this claim have been checked yet.
In the paper
“Su et al. found that, when polylactic acid was used as the membrane material, the embedding rate of hemoglobin was very low, only 7.9%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
Our copy of Zhang et al. (2009) is entirely about octreotide acetate encapsulated in PLGA/PLA microspheres and the inhibition of peptide acylation by water-soluble divalent cationic salts (CaCl2, MnCl2); no passage mentions hemoglobin, a 'Su et al.' work, polylactic acid used as a membrane material, or a 7.9% embedding/encapsulation figure (searched: hemoglobin, Su et al. / 7.9%, encapsulation efficiency and protein loading, poly(lactic acid) membrane). The MATERIAL AND METHODS section ('Drug loading and encapsulation efficiency') reports only octreotide extraction/HPLC assay of microspheres, and the reference list contains no Su entry, so nothing in our copy either supports or contradicts the attributed finding. The decisive part is simply absent from this paper, so the claim cannot be judged against it. (LLM, conf=0.75)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Good biocompatibility also ensures that there is no inflammatory reaction in the surrounding tissue due to rejection after it enters the human body [75,76,77].”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application
What the sources say
- Partly supportedcites [75] Mitragotri S. Burke P.A. Langer R. Overcoming the challenges in administering biopharmaceuticals: Formulation and delivery strategies Nat. Rev. Drug Discov. 2014 13 655 672 10.1038/nrd4363 25103255 PMC4455970 sourceExperimental — accuracy not yet measured
The Microparticles section describes PLGA as biocompatible and says it degrades into toxicologically acceptable products. It does not make that claim specifically for PLA or say that biocompatibility ensures no inflammatory reaction or tissue rejection after implantation. (LLM, conf=0.85)
- Partly supportedcites [76] Nottelet B. Darcos V. Coudane J. Aliphatic polyesters for medical imaging and theranostic applications Eur. J. Pharm. Biopharm. 2015 97 350 370 10.1016/j.ejpb.2015.06.023 26614557 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) describes aliphatic polyesters as having demonstrated biocompatibility, which supports the general point about PLA. It does not say that PLA entering the human body causes no rejection-related inflammatory reaction in surrounding tissue; that absolute assurance is unsupported. (LLM, conf=0.87)
- Not checked yetcites [77] Tan D.S. Diversity-oriented synthesis: Exploring the intersections between chemistry and biology Nat. Chem. Biol. 2005 1 74 84 10.1038/nchembio0705-74 16408003 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
None of the sources cited for this claim have been checked yet.
In the paper
“When using a polylactic acid–polyethylene glycol copolymer, the embedding rate reached 90%.”
§ Synthesis and Biological Application of Polylactic Acid > 3. Application > 3.1. Tissue Engineering
What the sources say
- Not checked yetcites [87] Waring M.J. Arrowsmith J. Leach A.R. Leeson P.D. Mandrell S. Owen R.M. Pairaudeau G. Pennie W.D. Pickett S.D. Wang J. An analysis of the attrition of drug candidates from four major pharmaceutical companies Nat. Rev. Drug Discov. 2015 14 475 486 10.1038/nrd4609 26091267 source
- Not checked yetcites [88] Langer R. Vacanti J.P. Tissue engineering Science 1993 260 920 926 10.1126/science.8493529 8493529 source
- Could not verifycites [89] Zhang Y. Sophocleous A.M. Schwendeman S.P. Inhibition of Peptide Acylation in PLGA Microspheres with Water-soluble Divalent Cationic Salts Pharm. Res. 2009 26 1986 1994 10.1007/s11095-009-9914-2 19533307 PMC4260456 sourceExperimental — accuracy not yet measured
The Introduction mentions PLA–PEG formulations only in a discussion of peptide acylation, not a 90% embedding rate. The Materials and Methods section on drug loading and encapsulation efficiency describes measurements of octreotide, not hemoglobin. Searches for hemoglobin and 90% found no passage supporting the claimed result. (LLM, conf=0.76)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Some plasticizers, such as low-molecular-weight citric acid, succinic acid, tartaric acid, and oxalate, are blended with PLA to change its mechanical and thermodynamic properties.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.4. Improvement of PLA Properties
What the sources say
- Not checked yetcites [66] Paul M.A. Alexandre M. Degee P. Henrist C. Rulmont A. Dubois P. New nanocomposite materials based on plasticized poly (l-lactide) and organo-modified montmorillonites: Thermal and morphological study Polymer 2003 44 443 450 10.1016/S0032-3861(02)00778-4 source
- Partly supportedcites [67] Paul M.A. Delcourt C. Alexandre M. Degee P. Monteverde F. Rulmont A. Dubois P. (Plasticized) polylactide/(organo-)clay nanocomposites by in situ intercalative polymerization Macromol. Chem. Phys. 2005 206 484 498 10.1002/macp.200400324 sourceExperimental — accuracy not yet measured
Our copy of Paul et al. (2005) does support the general idea that blending a plasticizer into PLA alters its properties: the 'In situ Polymerization in Presence of PEG' and 'Masterbatch Process' sections state that PLA's brittleness means it 'needs to be plasticized in order to fulfill mechanical requirements', and that 20 wt.-% PEG 1000 lowers the PLA matrix T_g to 26 °C (from 61 °C for nonplasticized chains, 'Clay' section) while raising melting enthalpy to 42.9 J/g; the PEG triblock section reports T_g falling to 41 °C and 12 °C at 8.5 and 16.2 wt.-% PEG. However, none of the specific plasticizers the claim names — citric acid, succinic acid, tartaric acid, oxalate — appear anywhere in our copy (searched: citric, succinic, tartaric, oxalate, low-molecular-weight plasticizer); the only plasticizers treated are PEG 1000 and residual L,L-lactide monomer ('lactide is known to be a good plasticizer for P(L,L-LA)'). Mechanical properties are also invoked only as motivation, not measured. The enumerated acid plasticizers are therefore not supported by this source. (LLM, conf=0.68)
- Not checked yetcites [68] Pluta M. Paul M.A. Alexandre M. Dubois P. Plasticized polylactide/clay nanocomposites. I. The role of filler content and its surface organo-modification on the physico-chemical properties J. Polym. Sci. Part B-Polym. Phys. 2006 44 299 311 10.1002/polb.20694 source
- Not checked yetcites [69] Tanoue S. Hasook A. Iemoto Y. Unryu T. Preparation of poly (lactic acid)/poly(ethylene glycol)/organoclay nanocomposites by melt compounding Polym. Compos. 2006 27 256 263 10.1002/pc.20174 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
31 more claims
Create a free account to see all 78 claims and to verify the 116 references still open.
- It may state two separate claims as one. 25
- Probably not a substantial claim. 22
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“On the other hand, in medicine, PLA can be applied in the areas of bioresorbent implants, surgical sutures, clamps, clips, surgical masks, or dressings [14,87,88,89,90,91].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“This drug delivery system avoids inconsistent local concentration on account of drug release. Thus, the therapeutic effect is enhanced [90].”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“The microspheres obtained had a porous structure inside, which advanced drug release.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
The cited source says what the claim attributes to it.
In the citing paper
“In vitro release was 49% in one month, making drug action time in the body longer.”
From Green Copolymers Based on Poly(Lactic Acid)—Short Review (2021) · cites this paper as [90]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“Since LA is a chiral molecule with d-type and l-type isomers, three forms of polylactic acid are formed: poly-l-lactic acid (PLLA), poly-d-lactic acid (PDLA), and poly-d,l-lactic acid (PDLLA).”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.2. PLA Polymer
“If l-lactic acid and d,l-lactic acid monomers are used to synthesize PLLA, the above problems are avoided [35,36].”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Synthesis and Biological Application of Polylactic Acid > Abstract
“Lactic acid, as a synthetic raw material of polylactic acid, can only be obtained by sugar fermentation.”
§ Synthesis and Biological Application of Polylactic Acid > 2. PLA Synthesis and Properties > 2.1. Lactic Acid
“Chemical synthesis methods have also been applied for the industrial production of lactic acid.”
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Stimuli-responsive nanocarriers for drug delivery
Mura, S., Nicolas, J., & Couvreur, P. (2013) · Nature Materials · doi:10.1038/nmat3776 · Cited by 6,289
A Multicenter, Randomized, Controlled Clinical Trial of Transfusion Requirements in Critical Care
Hébert, P. C., Wells, G., Blajchman, M. A., Marshall, J., Martin, C., Pagliarello, G., Tweeddale, M., Schweitzer, I., & Yetisir, E. (1999) · New England Journal of Medicine · doi:10.1056/nejm199902113400601 · Cited by 5,187
Plant Polyphenols as Dietary Antioxidants in Human Health and Disease
Pandey, K. B., & Rizvi, S. I. (2009) · Oxidative Medicine and Cellular Longevity · doi:10.4161/oxim.2.5.9498 · Cited by 3,942
Weiss, G., & Goodnough, L. T. (2005) · New England Journal of Medicine · doi:10.1056/nejmra041809 · Cited by 3,800
Long-Circulating and Target-Specific Nanoparticles: Theory to Practice
Moghimi, S. M., Hunter, A. C., & Murray, J. C. (2001) · Pharmacological Reviews · doi:10.1016/s0031-6997(24)01494-7 · Cited by 3,515
Denosumab for Prevention of Fractures in Postmenopausal Women with Osteoporosis
Cummings, S. R., Martin, J. S., McClung, M. R., Siris, E. S., Eastell, R., Reid, I. R., Delmas, P., Zoog, H. B., Austin, M., Wang, A., et al. (2009) · New England Journal of Medicine · doi:10.1056/nejmoa0809493 · Cited by 3,489
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · cited 2×
“Synthesis of polylactic acid (PLA) from L‐ and D‐lactic acids [28].”
BackgroundDietary polyphenols and the prevention of diseases
Scalbert, A., Manach, C., Morand, C., Rémésy, C., & Jiménez, L. (2005) · Critical Reviews in Food Science and Nutrition · doi:10.1080/1040869059096 · Cited by 2,999
Biodegradable Long-Circulating Polymeric Nanospheres
Gref, R., Minamitake, Y., Peracchia, M. T., Trubetskoy, V., Torchilin, V., & Langer, R. (1994) · Science · doi:10.1126/science.8128245 · Cited by 2,920
Research works printed but not linked: 1
- Bud R. A history of lactic-acid making–A chapter in the history of biotechnology-benninga,h Ann. Sci. 1993 50 597
Cited by
Items 401–492 of 492
ESTIMATION OF DRUG SHELL-LIFE TIME USING STATISTICAL RELIABILITY MODELS
Murguía, R. Á. P., & del Pino, E. M. V. G. (2023) · doi:10.22533/at.ed.65123300812
UTILIZACIÓN DE RESIDUOS NO CONVENCIONALES EN LA SUPLEMENTACIÓN DE ALIMENTOS PARA GANADO BOVINO
López, D. I. L.-G., Pardo, M. E. S., Treviño, E. M. R., Correa, J. A. L., & Garcia, J. H. G. (2023) · doi:10.22533/at.ed.65123300810
LA CONTRIBUCIÓN DE LA RESPONSABILIDAD SOCIAL EMPRESARIAL EN GUATEMALA
Miranda, F. D. M. G. (2023) · doi:10.22533/at.ed.6512330087
Zuluaga‐Parra, J. D., Ramos-deValle, L. F., Sánchez‐Valdés, S., Colunga, J. G. M., & da Silva, L. (2023) · doi:10.22533/at.ed.6512330084
da Silva, W. M., & Kemerich, P. D. D. C. (2023) · doi:10.22533/at.ed.6512330086
da Silva, W. M., & Kemerich, P. D. D. C. (2023) · doi:10.22533/at.ed.6512330085
ESTRATEGIA TECNOLÓGICA INTELIGENTE DE APOYO A LA PREVENCIÓN DE ENFERMEDADES CARDIACAS
Gutiérrez, S. S. M., & Molina-Ruíz, H. D. (2023) · doi:10.22533/at.ed.65123300813
BIODEGRADACIÓN DE DIFERENTES ACEITES POR HONGOS AISLADOS DE SUELOS CONTAMINADOS
Rodríguez, I. A., Trujillo, K. C. R., Pérez, A. R., González, J. F. C., & Oviedo, J. T. (2023) · doi:10.22533/at.ed.6512330088
Álvarez, J. S. L., Sanchez, J. A. V., Romero, G. D. O., Vazquez, F. G., & FLORES, A. (2023) · doi:10.22533/at.ed.6512330082
Investigación científica e innovación tecnológica en ingeniería
Holzmann, H. A. (2023) · doi:10.22533/at.ed.651233008
DISEÑO DE INTERFAZ GRÁFICA PARA EL ANÁLISIS DE VALORES DE ÍNDICE ULTRAVIOLETA
Huaman, C. W. T., Mamani, E. G. M., Vilca, R. A. L., Cahuana, L. P., Barreto, M. R., & Torres, V. P. (2023) · doi:10.22533/at.ed.65123300811
Álvarez, S. L., Ramírez, R. E. H., Chavero, O. T., & García, J. G. (2023) · doi:10.22533/at.ed.6512330083
MODELAMIENTO Y SIMULACIÓN DEL SECADO DE QUINUA POR LECHO FLUIDIZADO MEDIANTE LA ECUACION DE EULER
Vilca, R. A. L., Condori, C. P., Caceres, J. E. L., Calsín, M. H., Torres, V. P., Huaman, C. W. T., Achata, S. G. V., Mamani, U. Q., Sucari, Y. V. S., & Cruz, J. N. B. (2023) · doi:10.22533/at.ed.6512330089
Román, L. Z. F., de Jesús, C. G. J., Yen, S. M., Salazar-Uitz, R. R., & Felipe, N. P. (2023) · doi:10.22533/at.ed.65123300814
Polymer-Based Biomaterials and Tissue Engineering
Sabater i Serra, R., & Serrano-Aroca, Á. (2023) · MDPI eBooks · doi:10.3390/books978-3-0365-8236-8
Gaweł, A., Ostrowska, K., & Lisowska, A. (2023) · Advances in Science and Technology – Research Journal · doi:10.12913/22998624/174907
“It is usually used for the production of foil, disposable cutlery and packaging [24].”
BackgroundBiodegradation Properties of Natural Fibres from Renewable Resources
Brunšek, R., Schwarz, I. G., Kopitar, D., & Marasović, P. (2023) · Journal of Polytechnic · doi:10.2339/politeknik.1309218
Zhao, Z., Wang, C., Di, W., Hao, Y., Shi, S., & Zhai, Z. (2024) · Research Square · doi:10.21203/rs.3.rs-3802235/v1 · Cited by 1
Oliveros, R. T. (2023) · RiuNet (Universitat Politècnica de València) · doi:10.4995/thesis/10251/201561
Single-entity microscopy techniques illuminate cell membrane behavior
van der Borg, G. (2024) · University of Groningen research database (University of Groningen / Centre for Information Technology) · doi:10.33612/diss.957730793
Irsai, I., Pesek, S., & Silaghi-Dumitrescu, R. L. (2023) · Revue Roumaine de Chimie · doi:10.33224/rrch.2023.68.9.08
Microbiological Synthesis of Bioplastics
Hazwan, M. H., Ridzuan, N. A. M., Sathiaseelan, J. J., Alfian, W. I. S. W. A., & Bhubalan, K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15742-4.00002-8
Das, A., Goyary, S., Pathak, S., Tomer, V. K., & Baruah, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19235-7.00018-x
Recent Advances in Cellulosic Porous Materials
Aghvami‐Panah, M., & Ameli, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95486-0.00078-8
Application of Polymeric Nanoparticles for Brain Targeting
Agrawal, M., Rathod, K., & Roy, U. (2024) · Springer eBooks · doi:10.1007/978-981-97-2859-6_4
Poly-L-lactic acid in the correction of age-related changes in facial skin
Snarskaya, E. S., & Churbanova, A. I. (2024) · Russian Journal of Skin and Venereal Diseases · doi:10.17816/dv629582
Jawahar, N., Jubie, S., & Nidamanuri, B. S. S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95233-0.00012-1
In Vivo Study of Organ and Tissue Stability According to the Types of Bioresorbable Bone Screws
Kwon, T.-Y., Lee, G., Lee, H. S., & Lee, K.-B. (2024) · Materials · doi:10.3390/ma17225632
Shen, L., Zhang, L., & Xing, J. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5088667
Natural Rubber-Based Biocomposites and Bionanocomposites
Othman, N., & Musa, M. S. (2025) · Advanced structured materials · doi:10.1007/978-3-031-78557-3_4
Demchenko, V. L., Mamunya, Y. P., Iurzhenko, M. V., Kobylinskyi, S., Rybalchenko, N., Gnatiuk, T., Rybalchenko, T., Маринін, А. І., Shtepa, D., Sytnyk, I., et al. (2025) · Himia Fizika ta Tehnologia Poverhni · doi:10.15407/hftp16.01.090 · Cited by 1
Dong, X., Zhang, C., Wang, B., Wu, G., lv, J., Cheng, J., Ni, Z., & Zhao, G. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70155
Dixit, N., Yadav, A., Singh, P. K., Bala, S., & Jaiswal, A. K. (2025) · Smart nanomaterials technology · doi:10.1007/978-981-96-3878-9_3
Chen, W., Jiang, L., Chen, L., Dong, N.-N., Qin, L., Lin, Y., Gao, Y., Ju, Z., Pang, Y., & Chen, X. (2025) · Arabian Journal of Chemistry · doi:10.25259/ajc_76_2024
Materials for electrospinning and applications of electrospinning
Manjit, M., & Mishra, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29066-4.00001-9
Vardar, A., Erdebil, Ö., Mert, O., & Mert, S. (2025) · ChemistrySelect · doi:10.1002/slct.202501158
Polymers for composite materials
Puttegowda, M., Rangappa, S. M., & Siengchin, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-27546-3.00010-8
On the Use of Coaxial Nanofibers As Wound Dressings and Drug-Delivery Systems in Wound Healing
Николаевна, Р. К., Novosad, Y. A., & Vissarionov, S. V. (2025) · Nanobiotechnology Reports · doi:10.1134/s2635167624602316
Recent advances in materials for bio-implant with emphasis on novel research applications
Behera, S. C., & Behera, A. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-27378-0.00006-4 · Cited by 1
Oncorhynchus mykiss Microplastic Exposure: Impacts and Research Gaps
Ölmez, A., & Demir, H. (2025) · Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi · doi:10.18016/ksutarimdoga.vi.1659772
Qiao, Z., Li, B., Wu, X., Shu, D., He, M., & Li, J. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11045-8
Tripathi, D., Singh, R., Kush, P., & Kumar, P. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-27350-6.00002-x · Cited by 1
Polymeric nano/microparticles for oral insulin delivery
Sonia, T. A., & Sharma, C. P. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-30272-5.00002-0
Repairing spinal cord injuries: The most promising polymeric biomaterials and local drug delivery
Martins, I., Nunes, C., & Trigo, D. (2025) · Neural Regeneration Research · doi:10.4103/nrr.nrr-d-25-00460
“PLA is a renewable, nontoxic thermoplastic polymer derived from natural resources such as corn starch and sugarcane, approved for medical application by the US Food and Drug Administration, due to its biocompatibility and biodegradability (Li et al., 2020; Ranakoti et al., 2023).”
InfluentialEnzymatic Polymerization and Processing
Gimeno, M., Pimentel, M. A., & Bárzana, E. (2025) · Wiley eBooks · doi:10.1002/9781119820123.ch16 · Cited by 1
Biological Sources, Chemistry, and Extraction of Biopolymers
Sambhakar, S., Singh, B., Verma, S., Gupta, N., Modi, M., & ., P. (2025) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9798898811419125010005
Chemical Synthesis of Biobased Materials
Zhan, F., & Zhao, L. (2025) · Springer eBooks · doi:10.1007/978-981-95-1188-4_5
Biomedical Plasma Electrolytic Oxidation Composite Coatings via Particles Addition
Wang, X., Mei, D., Zhu, S., Wang, L., & Guan, S. (2025) · Springer eBooks · doi:10.1007/978-3-031-92429-3_11
Rahvar, M., Manoochehrabadi, T., Marouf, B. T., Lakalayeh, G. A., Kakolvand, R., Habibi, H., & Ghanbari, H. (2026) · BioNanoScience · doi:10.1007/s12668-025-02310-w
Synthesis and Application of Polylactic Acid: Recent Advances and Future Implications
Subhashani, S., & Priyadarshana, G. (2026) · Springer series on polymer and composite materials · doi:10.1007/978-3-032-16034-8_19
Fuster-Gómez, S., Navarro-Páez, F., Roca, F. G., & Monleon-Pradas, M. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.151329 · Cited by 1
López-Fernández, J., Benaiges, M. D., & Valero, F. (2026) · Biocatalysis and Biotransformation · doi:10.1080/10242422.2026.2643703
Sustainable Grafting for Biodegradable Polymer
Belgamwar, V. S., Zambre, D., Agade, R., Jaiswal, S., Trivedi, S., & Vinchurkar, K. (2026) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9798898813093126010003
Sharma, J., Dutta, P., Sagar, S., Nath, P., Meher, R. K., Jain, A., & Panda, T. K. (2026) · Chemistry - A European Journal · doi:10.1002/chem.71006
Neijhoft, J., Weslati, H., Eras, V., Brune, J. C., Leiblein, M., Bianconi, S., Söhling, N., Busse, L., Verboket, R. D., Frank, J. M., et al. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17040187 · Cited by 1
“Based on numerous studies, including our own, polylactic acid (PLA) is a widely adopted FFF polymer due to its processability and cytocompatibility [15–17].”
Xu, Q., Wang, X., Dong, C., & Wei, Y. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70810 · Cited by 2
Rajan, A., Raneesh, B., & Karthika, S. I. (2026) · Wiley eBooks · doi:10.1002/9781394214501.ch3
Zhang, L., Liu, F., Huang, Q., He, X., Li, K., Zhu, Y., Ye, X., Fang, Y., & Zhu, F. (2026) · Journal of Applied Polymer Science · doi:10.1002/app.70864
Estaji, S., Moshtaghi, P., Zarinkhat, F., Tayouri, M. I., Kermanshahi, P. K., Moghari, S., & Khonakdar, H. A. (2026) · Environmental Technology & Innovation · doi:10.1016/j.eti.2026.104998 · Cited by 1
Wen, W., Liu, J., Lin, Y., Hou, Y., Ding, S., Li, C., Lai, Y., & Luo, B. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177860
Ahmad, U., der Bruggen, B. V., & Yang, X. H. (2026) · Membranes · doi:10.3390/membranes16060206
“Its degradation procedure yields CO 2 and H 2 O, which are employed in pharmaceutical applications focused on drug delivery or scaffolding [206].”
Research Progress in the Preparation of Lactide
Tian, M., Zhou, Y., Wang, J., Cai, Z., Li, Z. Y., & Gao, Z. (2026) · Polymers · doi:10.3390/polym18121484
Raja, D. A., & Malik, M. I. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.109900
Tyagi, B., Dhall, D., Dixit, S., Mahajan, A., Goyal, N., Gagandeep, Raj, A., Pathania, A., Sahai, A., & Sharma, R. S. (2026) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057261463175
Progress and challenges of tantalum-containing biomaterials in regenerative medicine applications
Yang, Y., Wu, J., Liu, G., Luo, J., & Xie, X. (2026) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-026-07090-7
A comprehensive review on bone scaffold materials, manufacturing and it’s uses in tissue engineering
Patil, R., & Dhatrak, P. N. (2026) · AIP conference proceedings · doi:10.1063/5.0342132
Chitosan and Nano-cellulose as Emerging Smart Bio-material for Industry 5.0
Panigrahi, A., & Bhatta, K. (2026) · Lecture notes on multidisciplinary industrial engineering · doi:10.1007/978-3-032-21139-2_13
Guan, Q., Li, J., Wang, K., Wang, Y., Li, J., Li, P., Niu, X., & Hou, S. (2026) · Engineered Regeneration · doi:10.1016/j.engreg.2026.06.001
Polylactic acid in drug delivery
Askari, V. R., Boroomand, M., Faraji, S., Fadaei, M. S., & Dabbaghi, M. M. (2026) · Elsevier eBooks · doi:10.1016/b978-0-323-95363-4.00011-0
ZHU, J., Zhang, L., Xu, B., Jiang, F., Li, W., & Zhang, Z. (2026) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/1541-4337.70560
Stanciu, A. C., Hadăr, A., Goga, N., Butolo, M., Baciu, F., Pastramă, Ş. D., & Vlăsceanu, D. (2026) · Polymers · doi:10.3390/polym18131661
“PLA was chosen for its high processability and high potential for medical applications thanks to the biodegradability https://doi.org/10.3390/polym18131661 and biocompatibility of this material [25,26].”
InfluentialJo, J., Sereni, K. J., Kim, K. H., & Koo, B. (2026) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2026.07.007
Samantaray, A., Rath, S., Parhi, P., Behera, S., Ray, R. C., & Thatoi, H. (2026) · Food Reviews International · doi:10.1080/87559129.2026.2699346
Karjalainen, H., Karjalainen, V. P., Lorite, G. S., Hannula, M., Siponkoski, T., Nelo, M., Juuti, J., Mobasheri, A., Kellomäki, M., Hyttinen, J., et al. (2026) · Next Materials · doi:10.1016/j.nxmate.2026.102799
Raj, P. S., Bergfeld, W. F., Belsito, D. V., Cohen, D. E., Klaassen, C. D., Liebler, D. C., Rettie, A. E., Ross, D., Slaga, T. J., Snyder, P. W., et al. (2026) · International Journal of Toxicology · doi:10.1177/10915818261469141
“10,12 In a study describing film-forming Poly-lactic Acid, exposure to ethanol and water resulted in concurrent hydrolytic degradation, producing changes in MW and release of lactic acid monomer, and crystallization, characterized by swelling of the polymer matrix.”
Huang, C., Yue, S., Zhong, L., Huang, S., Xiao, M., Wang, S., Han, D., & Meng, Y. (2026) · Nanomaterials · doi:10.3390/nano16150934 · Cited by 1
“However, PPC exhibits a lower glass transition temperature (38–42 ◦ C) and poorer mechanical properties, including brittleness and low elongation at break (EAB), which limit its application in the field of packaging [107–109].”
Biodegradable Guided Bone Regeneration Membranes for Periodontal Regeneration in Dogs
Pinho, L. C., Santos, C. F., Fernandes, M. H., & Colaço, B. (2026) · Dentistry Journal · doi:10.3390/dj14080522
“PLA materials differ in degradation profiles, with crystalline Poly-L-lactic acid (PLLA) and poly-D-lactic acid (PDLA) degrading slowly, while amorphous poly-D, L-lactic acid (PDLLA) degrades more rapidly [44].”
Wang, S., Wang, Q., & Wu, Z. (2026) · Journal of Polymer Engineering · doi:10.1515/polyeng-2026-0061
“30 The V max of PLA/IFR decreases by 50.2 %.”
InfluentialChen, J., Wang, Q., Zheng, X., Gu, X., Pei, L., Dai, J., Li, R., Wang, X., & Wang, S. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70767
PLA Foaming Process and Its Research Progress
Xia, G., Yan, S., Hu, C., & Zeng, G. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.70322
“However, the preparation and purification of lactide increase the process complexity and production cost [ 55 ].”
Zhang, X., Lai, J., Wei, C., Chen, K., Zhao, G., Sun, Y., Huang, M., Liu, Y., Feng, C., Huang, Z., et al. (2026) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2026.124975
Strategies and Applications of Radical Polymerization in Cellular Microenvironments
Xiao, S., Zhou, S., Tian, Z., Kong, J., & Zhang, X. (2026) · Biomacromolecules · doi:10.1021/acs.biomac.6c00909
Ali, Y., Rahman, M., Ali, M. O., Mahmud, S., Islam, M. A., Khatun, H., Hossain, M. F., Chowdhury, M. A. H., & Rahman, H. (2026) · Next Nanotechnology · doi:10.1016/j.nxnano.2026.100726
Galati, M., Marco, G. D., Dara, M., Pusata, G. L., Parisi, M. G., Cammarata, M., Maisano, M. S., & Cappello, T. (2026) · Journal of Xenobiotics · doi:10.3390/jox16050176
“PLA is an aliphatic polyester formed by lactic acid monomers conjugated linearly by ester bonds [22,23].”
Wang, Z., Zhou, H., Wang, H., Chen, X., Yang, L., & Liang, C. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.70159
Yang, Z., Chen, M., Zhang, H., Fang, Y., Shi, W., Zhang, D., Cheng, J., & Zhao, J. (2026) · Advanced Agrochem · doi:10.1016/j.aac.2026.09.010
Polylactic acid nanoplastics induce kidney injury by activating the TRPM2-mediated mitophagy pathway
Yan, Z., Jia, T., Zhou, Y., & Xu, H. (2026) · Chemico-Biological Interactions · doi:10.1016/j.cbi.2026.112385
Xu, J., Zhang, X., Zhang, J., Gao, H., Gao, W., & Chang, H. (2026) · Molecular Catalysis · doi:10.1016/j.mcat.2026.116401
Multidimensional biomimetic strategies for artificial bone scaffolds in bone defect repair
Zhang, D., Lu, J., & He, W. (2026) · Bio-Medical Materials and Engineering · doi:10.1177/09592989261499320
Metadata
- Authors
- Li, G., Zhao, M., Xu, F., Yang, B., Li, X., Meng, X., Teng, L., Sun, F., & Li, Y.
- Affiliations
- Jilin University (CN)
- Corresponding author
- Sun, Fengying
- Li, Youxin
- ORCID
- Venue
- Molecules
- Publisher
- MDPI AG
- Published
- 2020-10-29
- Volume
- 25
- Issue
- 21
- Pages
- 5023
- ISSN
- 1420-3049 (ISSN-L)
- PMC
- PMC7662581
- OpenAlex
- W3096086014
- Cited by
- 492
- References
- 140
- Citations by year
- 2026: 55 · 2025: 115 · 2024: 112 · 2023: 105 · 2022: 71 · 2021: 34
- FWCI
- 3.52
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Molecules (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- People's Government of Jilin Province (20180101269JC)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Health Sciences › Medicine › Surgery › Surgical Sutures and Adhesives
- Keywords
- polylactic acid, lactic acid, biodegradable polymers, biocompatibility, polymer synthesis, polymer modification, drug delivery, implants, tissue engineering, biodegradation, sugar fermentation
- MeSH terms
- Biocompatible Materials, Humans, Polyesters, Drug Delivery Systems, Prostheses and Implants, Tissue Engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-01, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-01 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.