Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Open accessThe DOI matches its Crossref record; 279 of the 288 references it cites were found in a registry or an index; 29 of the 288 sources its claims cite were checked for support.
Abstract
Laser synthesis emerges as a suitable technique to produce ligand-free nanoparticles, alloys and functionalized nanomaterials for catalysis, imaging, biomedicine, energy and environmental applications. In the last decade, laser ablation and nanoparticle generation in liquids has proven to be a unique and efficient technique to generate, excite, fragment and conjugate a large variety of nanostructures in a scalable and clean way. In this work, we give an overview on the fundamentals of pulsed laser synthesis of nanocolloids and new information about its scalability towards selected applications. Biomedicine, catalysis and sensing are the application areas mainly discussed in this review, highlighting advantages of laser-synthesized nanoparticles for these types of applications and, once partially resolved, the limitations to the technique for large-scale applications.
Overview
CoChat Summary
TL;DR
This review surveys pulsed laser ablation in liquids (LAL) as a chemically clean route to ligand-free nanoparticles, alloys, and functional nanomaterials for biomedicine, catalysis, sensing, energy, and environmental applications. It concludes that LAL offers strong control over purity, crystal structure, and size distribution, but large-scale application still requires better colloidal stability, surface control, and defined gram-scale protocols.
Key findings
- LAL is presented as a scalable and clean synthesis route for nanocolloids, with applications in plasmonic sensing, nanomedicine, catalysis, and pollutant degradation; however, the review states that LAL colloids are “not yet applicable on a large scale.”
- Process parameters strongly affect productivity: IR laser light generally gives higher metal productivity than UV or Vis, but short wavelengths can become less productive at high colloid concentrations due to NP shielding; an optimum pulse duration is probably around single picoseconds. Electric-field-assisted LAL increased ablation rate by a factor of three, about 300 mg/30 min versus 100 mg/30 min without the field.
- Plasmonic tuning is demonstrated: Au/Ag alloy colloids can tune plasmon resonance continuously from about 400 nm (Ag) to 520 nm (Au); Ag spherical NPs showed higher plasmon sensitivity (125 nm/RIU) than Au NPs (45 nm/RIU), with roughly threefold increase after conversion to nanoplates and S = 460 nm/RIU after 730 nm irradiation.
- In photocatalysis, blue titania removed 76% of benzene after 80 min, while AuTiO2 left less than 1% residual benzene; after 5 min, BTX decreased by 53% with Au-decorated TiO2, 26% with blue TiO2, and 14% with commercial TiO2. Apparent rate constants increased from 1.4 × 10−2 min−1 (bare TiO2) to 3.8 × 10−2 min−1 (blue TiO2) and 8.3 × 10−2 min−1 (Au-loaded TiO2).
Methods
- Design: narrative review/overview of LAL fundamentals, process parameters, upscaling, and selected applications, not a primary systematic experimental study.
- Data/sample: synthesizes literature and the authors’ own contributions on ns/ps/fs LAL of metals and semiconductors in water and organic solvents, field-assisted LAL, plasmonic Au/Ag/Rh nanocolloids, SERS-based targeting, and TiO2/ZnO photocatalysis including BTX-contaminated industrial waters.
- Main analysis: qualitative and quantitative synthesis of cited experimental results, including optical emission spectroscopy, XRD/XPS, Raman/SERS, UV–Vis, plasmon sensitivity measurements, and photocatalytic degradation kinetics.
Limitations
- The paper states that LAL colloids are not yet large-scale applicable; reaching gram-scale production requires a properly defined LAL procedure and protocol, higher colloidal stability, and prevention of aggregation and larger-particle formation.
- It states that “ligand/surfactant-free” LAL NPs are not totally naked and still bear surface chemistry, with some surface atoms oxidized or complexed; an appropriate protocol for performance-oriented colloidal synthesis and isochronous surface modification is still not defined.
- The text also notes practical limits for nanoadsorption/nanophotocatalysis, the need for higher UV-SERS signal-to-noise, moderate Rh SERS enhancement with photo-degradation under 457 nm irradiation, and that the literature lacks full-range parameter data for productivity evaluation; as a review, it also relies on cited studies and selected examples rather than exhaustive primary data.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 (a) Image of laser-induced plasma on Al target immersed in water, acquired with ICCD camera. (b) Plasma temperature 2D map calculated as reported in [43] (Al target in MilliQ water, Elaser = 270 mJ, laser crater size = 1 ± 0.2 mm, λlaser = 532 nm, laser pulse duration = 6 ns, laser frequency = 10 Hz, delay time = 40 ns, gate width = 20 ns). (c) 3D representation of plasma temperature in (b).](https://figures.cochat.ai/paper-figures/96cfaa719e534646880c2f1310e9d25d/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-3.jpg)
![Figure 4 Time resolved shadowgraphy images of the laser induced bubble on Ag target immersed in water (a) and the corresponding bubble radius compared with the number of ejected Ag NPs during the bubble evolution (as calculated in [44]) (b). Experimental conditions: laser energy = 108 mJ, laser frequency = 2 Hz, laser crater size = 1 ± 0.2 mm, ICCD gate width = 20 µs and 5 accumulations for each image.](https://figures.cochat.ai/paper-figures/2fa383cc466a48779a6320553abcd0fe/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-4.jpg)
![Figure 5 Dependence graph of process parameters, arranged in component clusters, relevant to LAL up-scaling. If not marked differently by an arrow, the flow goes from the left to the right in horizontal direction and from the outside to the inside in vertical direction. Colors were used only for an improved overview. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/cde1d6599a99445b96e13723f9ab45f6/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-5.jpg)
![Figure 6 Schematic of the laser ablation of metals in liquids at different wavelengths in absence (a) and presence (b) of colloidal particles. Equal energy densities were assumed for all laser spots. The diagram in (c) (linear scales for both axes) demonstrates the effect of an increasing colloidal concentration on the NP productivity in LAL at different wavelengths. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/78878d1c8aa84446bff81498c7ff288c/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-6.jpg)
![Figure 7 Illustration of the laser ablation of metals in liquids at different fluences varied by the pulse energy (a) and the working distance (b). The diagram in (c) demonstrates how the fluence variation caused by different initial spot sizes affects the NP productivity in LAL in the high-fluence regime. A Gaussian beam profile was assumed. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. The arrow and the less dense (dashed) line style in (c) indicate the trend in productivity induced by a smaller initial spot size. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/69dcd42ab0de4a2581b8c3957bcdb61a/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-7.jpg)
![Figure 8 Illustration of the laser ablation of metals in liquids at different pulse durations neglecting non-linear effects. Thermal losses (a) and self-shielding by plasma (b) of pulses of different duration regimes. The diagram in (c) demonstrates how the coupling constant of electrons and phonons affects the NP productivity in LAL, depending on the laser pulse duration. A change of the coupling constant was assumed to have no influence on other material properties. In (c), the y-axis scales linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense (dashed) line style indicate the effect of a longer coupling time of electrons and phonons of the target material on productivity. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/082c9541edfe4142a53c0bd091799e62/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-8.jpg)
![Figure 9 Illustration of the optical breakdown of the liquid during the laser ablation of metals in liquids at different intensities neglecting non-linear effects. Dependence of the occurrence of the optical breakdown on the laser pulse duration (a) and on the colloid concentration (b). Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/67a4968f676d47e8a3d8c4f31c27e126/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-9.jpg)
![Figure 10 Illustration of a too short (a) and an appropriate (b) interpulse distance in the laser ablation of metals in liquids. The diagram in (c) demonstrates relative effects of different laser pulse durations on the dependence of the productivity on the inter-pulse distance. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense line style indicate the effect of a longer laser pulse duration on productivity. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/80abd62fefc240409da8004f1150f734/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-10.jpg)
![Figure 11 Illustration of the effect of the liquid flow rate (a) and of the liquid layer height (b) on the productivity in the laser ablation of metals in liquids. The diagram in (c) demonstrates relative effects of different liquid layer heights on the dependence of the productivity on the volume flow rate. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the dashed line shows the effect of lower liquid layer height on the productivity, and the dashed line shows the effect of a too low liquid layer height compared to the solid line, respectively. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/163ce9e6e4d240d8b028b2943d6757ad/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-11.jpg)
![Figure 12 Illustration of the effect of the target thickness in the laser ablation of metals in liquids (a) and the influence of the laser pulse duration on the heat confinement in thin targets (b). The diagram in (c) demonstrates relative effects of different laser pulse duration on the dependence of the productivity on the ablation target thickness. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense line style indicate the effect of longer pulse duration on productivity. In (c), the vertical solid line in the center of the diagram marks the penetration depths of the laser pulse into the target material. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/9affca35ffcc431a827e3dce2b836b79/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-12.jpg)


![Figure 15 Optical absorption spectra of spherical vs triangular silver NPs (a); SEM image of spherical NPs (b) and of triangular nanoparticles (c) TEM image and in the inset AFM profiles of triangular NPs (d). Reprinted from Ref. [156], Copyright (2019), with permission from Elsevier.](https://figures.cochat.ai/paper-figures/e83c97438fba4994acc9a4ac03278118/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-15.jpg)
![Figure 16 Plasmon sensitivity measurements from gold and silver spherical nanoparticles, obtained by laser ablation in water, and silver triangular nanoplates obtained by white light irradiation of the same spherical NPs (a); plasmon sensitivity measurements from triangular NPs obtained from monochromatic light irradiation of spherical NPs (also shown) obtained by laser ablation (b). Figure 16a reprinted from Ref. [156], Copyright (2019), with permission from Elsevier. Figure 16b reprinted from Ref. [170], with the permission of The Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/8536c795c71b46dfb0ce0c8ab3fba3ac/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-16.jpg)





Verification
Claims the paper makes
22 Valid · 9 Not valid · 150 Not checked · 135 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“All studies agree independently from the ablated matter, the chosen liquid and the used laser pulse duration on a higher productivity by using IR laser light compared to UV or Vis.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Partly supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 sourceExperimental — accuracy not yet measured
The Results and discussion and Conclusions report higher nanoparticle productivity at the fundamental IR wavelength than at the visible second harmonic wavelength for Ag, Zn, and Mg ablated with picosecond pulses in polyurethane-doped tetrahydrofuran. The Introduction also reports similar findings from several studies using nanosecond pulses. These passages do not establish agreement among all studies regardless of material, liquid, or pulse duration, and the paper does not test a UV comparison. Page numbers were not provided for these passages. (LLM, conf=0.88)
- Not checked yetcites [67] Tsuji T. Iryo K. Ohta H. Nishimura Y. Preparation of Metal Colloids by a Laser Ablation Technique in Solution: Influence of Laser Wavelength on the Efficiencies of Colloid Formation Jpn. J. Appl. Phys. 2000 39 L981 L983 10.1143/JJAP.39.L981 source
Checked before — its earlier verdict is held back until a new check runs.
- Not matchedcites [68] Šmejkal P. Pfleger J. Vlčková B. Dammer O. Laser ablation of silver in aqueous ambient: Effect of laser pulse wavelength and energy on efficiency of the process J. Physics: Conf. Ser. 2007 59 185 188 10.1088/1742-6596/59/1/040
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The basic mechanisms inducing the laser ablation in liquid, as well as their dependence on laser pulse properties, do not differ notably, with respect of laser ablation in gaseous environment [54].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.1. Mechanism in ns-Pulsed Laser Ablation in Liquid for the Production of Metallic Nanoparticles
What the sources say
- Partly supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says pulse duration changes the ablation mechanism in liquid, and the Results and discussion report effects of wavelength and fluence. The paper does not compare those mechanisms or their dependence on pulse properties with ablation in a gaseous environment, so the claimed similarity is unsupported. (LLM, conf=0.78)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The absence of the typical atomic spectral lines of the LIP expanding in a gaseous environment is due to the high density reached by the ablated matter under liquid confinement as discussed in [40,41,42].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.1. Mechanism in ns-Pulsed Laser Ablation in Liquid for the Production of Metallic Nanoparticles
What the sources say
- Could not verifycites [40] Wagener P. Barcikowski S. Laser fragmentation of organic microparticles into colloidal nanoparticles in a free liquid jet Appl. Phys. A 2010 101 435 439 10.1007/s00339-010-5814-x sourceExperimental — accuracy not yet measured
Our copy of Wagener, Philipp & Barcikowski (2010) covers laser fragmentation of melamine cyanurate microcrystals in a free liquid jet, with UV/VIS, DLS and TEM characterization (Abstract; §1 Introduction; §3 Results and discussion); its only mention of plasma is mechanistic — 'a focused laser pulse which generates a plasma and a subsequent shock wave within the microparticles' (§3). No passage addresses optical emission spectroscopy of the laser-induced plasma, atomic spectral lines, or their suppression under liquid confinement versus gaseous expansion (searched: 'absence of atomic spectral lines … liquid confinement', 'plasma emission shielding confining medium density', 'atomic emission lines plasma spectroscopy'). The claim's point is therefore not treated in our copy, neither supported nor contradicted. (LLM, conf=0.72)
- Not checked — no full text of the sourcecites [41] Amendola V. Polizzi S. Meneghetti M. Free Silver Nanoparticles Synthesized by Laser Ablation in Organic Solvents and Their Easy Functionalization Langmuir 2007 23 6766 6770 10.1021/la0637061 17489616 source
- Partly supportedcites [42] Chemin A. Lam J. Laurens G. Trichard F. Motto-Ros V. LeDoux G. Jary V. Laguta V. Nikl M. Dujardin C. Doping nanoparticles using pulsed laser ablation in a liquid containing the doping agent Nanoscale Adv. 2019 1 3963 3972 10.1039/C9NA00223E PMC9419851 36132111 sourceExperimental — accuracy not yet measured
The Introduction describes a hot, dense plasma produced by laser ablation in liquid. It does not say that this density causes typical atomic spectral lines to be absent. The Experimental section’s LIBS measurements report atomic emission lines, but those measurements were made with argon gas flowing through the plasma region, not in the liquid-confined plume. (LLM, conf=0.78)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“This is strongly indicated by the observed smaller NP diameters at shorter applied wavelengths [54,69,70], which may be the result of fragmentation induced by subsequent laser pulses during batch-LAL.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 source
The Results and discussion section (page unavailable) reports that, for silver colloids, particle diameter decreased more sharply at the shorter wavelength (515 nm) than at 1030 nm. It says the decrease could be attributed to fragmentation of dispersed nanoparticles during post-irradiation, matching the claim's tentative explanation. (LLM, conf=0.89)
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The laser wavelength essentially influences the ablation rate in LAL [54,67,68,69,70].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 source
The Results and discussion report that silver ablation at 1030 nm maintained a linear ablation rate, whereas at 515 nm losses of excitation light led to saturation of cumulative ablated mass. The Conclusions likewise identify laser wavelength as a factor in ablation efficiency, while noting that pulse energy, fluence, and colloidal properties also matter. (LLM, conf=0.90)
- Supportedcites [67] Tsuji T. Iryo K. Ohta H. Nishimura Y. Preparation of Metal Colloids by a Laser Ablation Technique in Solution: Influence of Laser Wavelength on the Efficiencies of Colloid Formation Jpn. J. Appl. Phys. 2000 39 L981 L983 10.1143/JJAP.39.L981 source
The paper's entire subject is the wavelength dependence of ablation in laser ablation in solution: Section 3.1/Experimental states that 'the efficiency of the colloid formation increases as the wavelength decreases' and that 'the ablation efficiency is larger at shorter wavelengths than at longer wavelengths over the entire fluence range' (nonfocused 355/532/1064 nm, Ag target in water). Section 3.2 adds that under focused irradiation the relation between ablation efficiency and focusing 'significantly depends on the irradiation wavelength', with the dependence reversing to longer wavelengths, described as 'characteristic of laser ablation in solution'. The only nuance is that our copy quantifies ablation/colloid-formation efficiency via the 400 nm plasmon absorbance rather than a target mass-removal rate, but the attributed point — that wavelength strongly governs the ablation yield in LAL — is stated directly. (LLM, conf=0.85)
- Not matchedcites [68] Šmejkal P. Pfleger J. Vlčková B. Dammer O. Laser ablation of silver in aqueous ambient: Effect of laser pulse wavelength and energy on efficiency of the process J. Physics: Conf. Ser. 2007 59 185 188 10.1088/1742-6596/59/1/040
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
179 more claims · 11 with their cited sources checked
Create a free account to see all 316 claims and to verify the 32 references still open.
- It may state two separate claims as one. 94
- The quote only partly states this claim. 5
- Probably not a substantial claim. 43
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 3. Promising Applications of LAL Nanostructures for Biotechnology Applications and for Organic Pollutants Degradation > 3.1. Plasmonic Properties of Metal Nanoparticles and Plasmon Sensitivity
“It has to be noted that Equation (1) is strictly valid only for spherical particles, while for particles with different shapes, the geometry must be taken into account and a plasmon resonance shift can be expected.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 3. Promising Applications of LAL Nanostructures for Biotechnology Applications and for Organic Pollutants Degradation > 3.1. Plasmonic Properties of Metal Nanoparticles and Plasmon Sensitivity
“In this case the polarizability is expressed as:(11)α=4πε0R3ε−εmε+2εm where ε is the dielectric function [ε1(ω)+iε2(ω)] and R the radius of the NP.”
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
A note, not an issue: for example, a cited work that was retracted only after this paper was published, which its authors could not have known.
In the paper
“The availability of a consistent SERS enhancement in the deep-UV spectral region would therefore allow recording Raman spectra with very low excitation power [190,209], which would be beneficial to reduce photo-degradation issues.”
Cited work 10.1039/c8an00341f · retracted 2021-07-06 · notice 10.1039/d1an90061g · this paper published 2020-11-23
Citations
Cites
1 retracted
Items 201–279 of 279
Experimental and theoretical investigation of laser-induced plasma of a titanium target
Casavola, A. R., Colonna, G., De Giacomo, A., De Pascale, O., & Capitelli, M. (2003) · Applied Optics · doi:10.1364/ao.42.005963 · Cited by 44 · cited 1×
“On the contrary, when the laser pulse is long enough (as in the case of ns) to effectively interact with the ablated material, inducing further ionization and electron heating, the role of the plasma becomes dominant and kinetics models coupled with fluidynamics are required for a full description of the phenomenon [5…”
BackgroundSelf-citationWavelength scaling of silicon laser ablation in picosecond regime
Sikora, A., Grojo, D., & Sentis, M. (2017) · Journal of Applied Physics · doi:10.1063/1.4994307 · Cited by 44 · cited 2×
“Note that for semiconducting and dielectric materials the initial ablation rate in absence of a light-extinction colloid can be higher at red and near IR wavelengths under specific conditions due to differences in the ablation mechanism compared to metals [80,81].”
BackgroundDoñate-Buendía, C., Fernández-Alonso, M., Lancis, J., & Mínguez-Vega, G. (2019) · Photonics Research · doi:10.1364/prj.7.001249 · Cited by 43 · cited 1×
“To explore the wide range of opportunities that LAL brings, the unique properties of femtosecond lasers is a further hot research topic, not only to increase NP production, but also to generate structural modifications and new material phases [46,47].”
BackgroundAdvances in the Application of Lasers in Materials Science
Axente, E., Ristoscu, C., Bigi, A., et al. (2018) · Springer series in materials science · doi:10.1007/978-3-319-96845-2 · Cited by 43
Optical limiting effects in linear carbon chains
Fazio, E., Neri, F., Patanè, S., D’Urso, L., & Compagnini, G. (2010) · Carbon · doi:10.1016/j.carbon.2010.09.026 · Cited by 43 · cited 1×
“In addition, NPs prepared by the Laser Ablation in Liquids (LAL) have been recently used for various and unique applications like friction reduction [34], solar nanofluids [35,36], optical limiting devices [37,38] and so on.”
MethodSelf-citationSERS Sensing Properties of New Graphene/Gold Nanocomposite
Neri, G., Fazio, E., Mineo, P., Scala, A., & Piperno, A. (2019) · Nanomaterials · doi:10.3390/nano9091236 · Cited by 43 · cited 1×
“, higher durability, conductivity, thermal stability, solubility, reduced friction, selective molecular detection) [1,2].”
Self-citationLitti, L., Ramundo, A., Biscaglia, F., Toffoli, G., Gobbo, M., & Meneghetti, M. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.08.107 · Cited by 42 · cited 2×
“Furthermore, the naked surface of these NPs can be easily functionalized, for example with molecules for active cell targeting [171–173], for sensing and diagnosis [174–176], for drug monitoring [177] and also for therapies, as in the case of photothermal therapy [171,175].”
BackgroundSelf-citationLaser breakdown in alcohols and water induced by λ= 1064 nm nanosecond pulses
Kovalchuk, T., Toker, G., Bulatov, V., & Schechter, I. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2010.09.076 · Cited by 42 · cited 1×
“[112] demonstrated, temporally and spatially resolved, how particulate impurities in tap water and different alcohols act as seeds for the plasma formation in the laser-induced optical breakdown of the liquids.”
BackgroundHupfeld, T., Wegner, A., Blanke, M., Doñate‐Buendía, C., Sharov, V., Nieskens, S., Piechotta, M., Giese, M., Barcikowski, S., & Gökce, B. (2020) · Advanced Optical Materials · doi:10.1002/adom.202000473 · Cited by 42 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationChakravadhanula, V. S. K., Mishra, Y. K., Kotnur, V. G., Avasthi, D. K., Strunskus, T., Zaporotchenko, V., Fink, D., Kienle, L., & Faupel, F. (2014) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.5.154 · Cited by 42 · cited 1×
“Traditionally, nanoplasmonics focuses on noble metals (Au, Ag, Cu) or their alloys whose LSPRs are in the visible (Vis) or near-infrared (NIR) spectral regions [184].”
BackgroundOn the growth mechanism of nanoparticles in plasma during pulsed laser ablation in liquids
Taccogna, F., Dell’Aglio, M., Rutigliano, M., Valenza, G., & De Giacomo, A. (2017) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/aa595b · Cited by 41 · cited 4×
“The mechanism of growth in the plasma phase during ns-LAL has been investigated with a theoretical model in [61] where the competition between thermodynamic condensation and electrostatic growth has been investigated.”
BackgroundMethodInfluentialSelf-citationLiang, Y., Liu, P., & Yang, G. (2014) · Crystal Growth & Design · doi:10.1021/cg501079a · Cited by 39 · cited 3×
“Various field-assisted LAL techniques have been developed, such as temperature field-assisted LAL [126], electric field-assisted laser ablation in liquid (EFLAL) [127], Magnetic Field-assisted Laser Ablation in Liquid (MFLAL) [128] and electrochemistry-assisted laser ablation in liquid (ECLAL) [129].”
MethodEffect of electric fields on tin nanoparticles prepared by laser ablation in water
Sapkota, D., Li, Y., Musaev, O. R., Wrobel, J. M., & Kruger, M. B. (2017) · Journal of Laser Applications · doi:10.2351/1.4963270 · Cited by 38 · cited 1×
“[135] used an excimer laser (351 nm) to ablate a solid tin target immersed in water in the presence of an external electric field, while Jumaa et al.”
MethodImpact of liquid environment on femtosecond laser ablation
Kanitz, A., Hoppius, J. S., Fiebrandt, M., Awakowicz, P., Esen, C., Ostendorf, A., & Gurevich, E. L. (2017) · Applied Physics A · doi:10.1007/s00339-017-1280-z · Cited by 38 · cited 5×
“At very low values of the laser fluence, a less productive ablation regime prevails [82], which is not considered here.”
BackgroundInfluentialPlasmonic Nanostructures for SERRS Multiplexed Identification of Tumor‐Associated Antigens
Meneghetti, M., Scarsi, A., Litti, L., Marcolongo, G., Amendola, V., Gobbo, M., Di Chio, M., Boscaini, A., Fracasso, G., & Colombatti, M. (2012) · Small · doi:10.1002/smll.201201196 · Cited by 37
Self-citationBunkin, N. F., Ninham, B. W., Babenko, V. A., Suyazov, N. V., & Sychev, A. A. (2010) · The Journal of Physical Chemistry B · doi:10.1021/jp101657f · Cited by 36 · cited 2×
“solvent molecules with dissolved gases [115].”
BackgroundDoping nanoparticles using pulsed laser ablation in a liquid containing the doping agent
Chemin, A., Lam, J., Laurens, G., Trichard, F., Motto-Ros, V., Ledoux, G., Jarý, V., Laguta, V., Nikl, M., Dujardin, C., et al. (2019) · Nanoscale Advances · doi:10.1039/c9na00223e · Cited by 36 · cited 1×
“The photoionization cross section at high density conditions, shows a smooth dependence on wavelength [42], so that its contribution can be considered constant in the range of photon energy investigated in the visible range, i.”
BackgroundDell’Aglio, M., Motto-Ros, V., Pelascini, F., Gornushkin, I. B., & De Giacomo, A. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab369b · Cited by 35 · cited 3×
“By the inspection of the figure it can be observed that in the core of the plasma, where the number density is very high [60,61], there is a decrease in temperature beyond the condensation temperature of most of the metals.”
BackgroundMethodSelf-citationThe citrate-mediated shape evolution of transforming photomorphic silver nanoparticles
Lee, G. P., Bignell, L. J., Romeo, T. C., Razal, J. M., Shepherd, R., Chen, J., Minett, A. I., Innis, P. C., & Wallace, G. G. (2010) · Chemical Communications · doi:10.1039/c0cc02580a · Cited by 35
Pulsed laser melting of bismuth telluride thermoelectric materials
Carter, M. J., El-Desouky, A., André, M. A., Bardet, P. M., & LeBlanc, S. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.04.021 · Cited by 35 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundBertorelle, F., Pinto, M., Zappon, R., Pilot, R., Litti, L., Fiameni, S., Conti, G., Gobbo, M., Toffoli, G., Colombatti, M., et al. (2018) · Nanoscale · doi:10.1039/c7nr07844g · Cited by 34 · cited 4×
“which were targeted by the functionalized NPs [171].”
BackgroundInfluentialSelf-citationChu, W. G., Wang, H. F., Guo, Y. J., Zhang, L. N., Han, Z. H., Li, Q. Q., & Fan, S. S. (2009) · Inorganic Chemistry · doi:10.1021/ic801885c · Cited by 33 · cited 1×
“POM nanostructures are attractive because of their high catalytic activity in oil refining, their favorable emission properties and suitability for energy storage applications [130].”
BackgroundFemtosecond Laser-Assisted Optoporation for Drug and Gene Delivery into Single Mammalian Cells
Soman, P., Zhang, W., Umeda, A., et al. (2011) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2011.1295 · Cited by 33 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundLitti, L., Rivato, N., Fracasso, G., Bontempi, P., Nicolato, E., Marzola, P., Venzo, A., Colombatti, M., Gobbo, M., & Meneghetti, M. (2018) · Nanoscale · doi:10.1039/c7nr07398d · Cited by 33 · cited 3×
“SERS signals, as a new approach for the detection of targeting events are much more efficient than the usual fluorescence signals and allow very easy multiplexing measurements because of the very narrow bands that can be recorded for vibrational SERS spectra with respect to the very large bands observed for fluorescen…”
BackgroundSelf-citationSurface-enhanced Raman scattering using bismuth nanoparticles: A study with amino acids
Bezerra, A. G., Cavassin, P., Machado, T. N., Woiski, T. D., Caetano, R., & Schreiner, W. H. (2017) · Journal of Nanoparticle Research · doi:10.1007/s11051-017-4057-6 · Cited by 32 · cited 3×
“By using such Bi NPs as a SERS platform, the spectra of several amino acids were obtained [199], thus indicating that Bi could be considered an interesting material for the SERS detection of biomolecules, a task that is usually pursued by means of Ag and Au nanostructures.”
BackgroundInfluentialFast and simple synthesis of triangular silver nanoparticles under the assistance of light
Nguyen, T. H. N., Nguyen, T. D., Cao, M. T., & Pham, V. V. (2020) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2020.124659 · Cited by 31
Characterization of Tin/Ethylene Glycol Solar Nanofluids Synthesized by Femtosecond Laser Radiation
Torres‐Mendieta, R., Mondragón, R., Puerto‐Belda, V., Mendoza‐Yero, O., Lancis, J., Juliá, J. E., & Mínguez‐Vega, G. (2017) · ChemPhysChem · doi:10.1002/cphc.201601083 · Cited by 31 · cited 1×
“In addition, NPs prepared by the Laser Ablation in Liquids (LAL) have been recently used for various and unique applications like friction reduction [34], solar nanofluids [35,36], optical limiting devices [37,38] and so on.”
MethodFazio, E., Speciale, A., Spadaro, S., Bonsignore, M., Cimino, F., Cristani, M., Trombetta, D., Saija, A., & Neri, F. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.06.028 · Cited by 31 · cited 1×
“[140,141] that deal with the synthesis of Mo oxide nanocolloids using a focused picosecond-pulsed laser beam (λ = 532 nm, repetition rate = 100 kHz, pulse width = 6–8 ps).”
Self-citationReflectivity of metals at high temperatures heated by pulsed laser
Chan, P. W., Chan, Y. W., & Ng, H. S. (1977) · Physics Letters A · doi:10.1016/0375-9601(77)90275-4 · Cited by 30 · cited 1×
“However, the optical properties of an irradiated surface significantly depend on its temperature [75], roughness [76,77] and oxidation state/degree [78].”
BackgroundHigh-pulse repetition frequency ultrashort pulse laser processing of copper
Schille, J., Schneider, L., Lickschat, P., Loeschner, U., Ebert, R., & Exner, H. (2015) · Journal of Laser Applications · doi:10.2351/1.4906482 · Cited by 30 · cited 2×
“[102] found a slight decrease in the ablation rate of copper during an increase of the pulse duration from 200 fs to 4 ps.”
BackgroundAl-Mamun, S. A., Nakajima, R., & Ishigaki, T. (2012) · Thin Solid Films · doi:10.1016/j.tsf.2012.06.011 · Cited by 29 · cited 3×
“[86] observed a maximized ablation rate at a minimized layer height of 2 mm and Jiang et al.”
BackgroundValverde-Alva, M. A., García-Fernández, T., Esparza-Alegría, E., Villagrán-Muniz, M., Sánchez-Aké, C., Castañeda-Guzmán, R., de la Mora, M. B., Márquez-Herrera, C. E., & Sánchez Llamazares, J. L. (2016) · Laser Physics Letters · doi:10.1088/1612-2011/13/10/106002 · Cited by 28 · cited 1×
“The strategy is to spatially separate successive laser pulses by adjusting the interplay of the laser spot size, the scanning speed (relative movement between laser beam and target) and the pulse repetition rate to avoid shielding caused by the previous pulse [82,84,90,91,116].”
BackgroundJha, S. K., Ekinci, Y., Agio, M., & Löffler, J. F. (2015) · The Analyst · doi:10.1039/c4an01719f · Cited by 27
Plasmon sensing and enhancement of laser prepared silver colloidal nanoplates
Condorelli, M., Scardaci, V., D'Urso, L., Puglisi, O., Fazio, E., & Compagnini, G. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.265 · Cited by 27 · cited 5×
“friendly process that does not involve the use of strong reducing agents or harmful chemicals [156,161,162].”
BackgroundInfluentialSelf-citationNonlinear Scattering and Absorption Effects in Size-Selected Diphenylpolyynes
Fazio, E., D’Urso, L., Consiglio, G. A., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp509666x · Cited by 27 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationLaser ablation in liquids of germanium in externally applied electric fields
Li, Y., Musaev, O. R., Wrobel, J. M., & Kruger, M. B. (2016) · Journal of Laser Applications · doi:10.2351/1.4940793 · Cited by 26 · cited 1×
“Furthermore, laser ablation of germanium in liquids with static, externally applied electric fields is discussed in [139].”
BackgroundEffect of Oxidation and Plume Formation on Low Power Nd-Yag Laser Metal Interaction
Patel, R. S., & Brewster, M. Q. (1990) · Journal of Heat Transfer · doi:10.1115/1.2910341 · Cited by 26 · cited 1×
“However, the optical properties of an irradiated surface significantly depend on its temperature [75], roughness [76,77] and oxidation state/degree [78].”
BackgroundThe absorption spectra and photo-sensitising activity of white pigments
Goodeve, C. F. (1937) · Transactions of the Faraday Society · doi:10.1039/tf9373300340 · Cited by 26 · cited 2×
“In particular, in 1931, Rao et al. observed the decomposition under solar irradiation of ammonia salts-based fertilizers due to the presence in the soil of TiO2 and ZnO [236–238], while the mechanism of photogenerated electron/hole (e−/h+) generation and recombination at different irradiation frequency was first discu…”
BackgroundPreparation of RhO2 Thin Films by Reactive Sputtering and Their Characterizations
Kato, K., Abe, Y., Kawamura, M., & Sasaki, K. (2001) · Japanese Journal of Applied Physics · doi:10.1143/jjap.40.2399 · Cited by 26 · cited 1×
“As discussed in [212], XRD and XPS results show that ablation of Rh in water leads to the production of mixed Rh/Rh-oxide phases (RhO2 and Rh2O3), whereas in ethanol essentially metallic Rh NPs are produced, in agreement with [216].”
ResultPhotocatalytic hybrid Au/ZnO nanoparticles assembled through a one-pot method
Manna, J., Vinod, T. P., Flomin, K., & Jelinek, R. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.08.053 · Cited by 26 · cited 3×
“improvement of the photoefficiency is due to the presence of Au NPs [260,271,272], that, thanks to the SPR and high electron density, are able to enhance the electron transfer from the Au NPs to the catalyst [273,274].”
BackgroundPHOTOSENSITIZED OXIDATION OF AMMONIA AND AMMONIUM SALTS AND THE PROBLEM OF NITRIFICATION IN SOILS
Rao, G. G., & Dhar, N. R. (1931) · Soil Science · doi:10.1097/00010694-193105000-00004 · Cited by 25
Resano-Garcia, A., Battie, Y., Koch, A., En Naciri, A., & Chaoui, N. (2015) · Journal of Applied Physics · doi:10.1063/1.4915277 · Cited by 25 · cited 1×
“Liquid Environment: The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
BackgroundNanostructured rhodium films produced by pulsed laser deposition for nuclear fusion applications
Passoni, M., Dellasega, D., Grosso, G., et al. (2010) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2010.06.015 · Cited by 25 · cited 1×
“In the recent past, pulsed laser ablation was used to make planar homogeneous Rh thin films with thickness up to 1 μm for the realization of mirrors to be used in harsh environments [210,211].”
MethodBiscaglia, F., Quarta, S., Villano, G., Turato, C., Biasiolo, A., Litti, L., Ruzzene, M., Meneghetti, M., Pontisso, P., & Gobbo, M. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109762 · Cited by 25 · cited 5×
“NPs synthesized by LAL are of particular interest because of their clean surface, which allows functional molecules to reach easily the NP surface [179,180].”
BackgroundMethodInfluentialSelf-citationNanostructured rhodium films for advanced mirrors produced by Pulsed Laser Deposition
Uccello, A., Dellasega, D., Perissinotto, S., et al. (2012) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2012.08.046 · Cited by 24 · cited 1×
“In the recent past, pulsed laser ablation was used to make planar homogeneous Rh thin films with thickness up to 1 μm for the realization of mirrors to be used in harsh environments [210,211].”
MethodDamilano, B., Coulon, P.-M., Vézian, S., Brändli, V., Duboz, J.-Y., Massies, J., & Shields, P. A. (2019) · Applied Physics Express · doi:10.7567/1882-0786/ab0d32 · Cited by 24 · cited 1×
“Typical examples are etching (controlled by masks), ball milling, metal-organic vapor phase epitaxy and the application of severe plastic deformations [7].”
BackgroundGrowth Kinetics and Sensing Features of Colloidal Silver Nanoplates
Compagnini, G., Condorelli, M., Fragalà, M. E., Scardaci, V., Tinnirello, I., Puglisi, O., Neri, F., & Fazio, E. (2019) · Journal of Nanomaterials · doi:10.1155/2019/7084731 · Cited by 22 · cited 4×
“However, the use of LAL for the production of the seeds, coupled with light irradiation and H2O2 addition, has the great advantage of being an environment-friendly process that does not involve the use of strong reducing agents or harmful chemicals [156,161,162].”
BackgroundInfluentialSelf-citationKucherik, A. O., Ryabchikov, Y. V., Kutrovskaya, S., Al‐Kattan, A., Arakelyan, S. M., Itina, T., & Kabashin, A. V. (2017) · ChemPhysChem · doi:10.1002/cphc.201601419 · Cited by 22
Farokhnezhad, M., & Esmaeilzadeh, M. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b08648 · Cited by 21 · cited 1×
“where x denotes the Au molar fraction in the Au−Ag alloy [149].”
BackgroundSERS of pyridine adsorbed on rhodium electrodes
Bilmes, S. A. (1990) · Chemical Physics Letters · doi:10.1016/0009-2614(90)80065-l · Cited by 20 · cited 1×
“[201] who observed an increased pyridine Raman activity on an electrochemically roughened Rh substrate.”
BackgroundMoniri, S., Hantehzadeh, M. R., Ghoranneviss, M., & Asadabad, M. A. (2017) · Applied Physics A · doi:10.1007/s00339-017-1311-9 · Cited by 20
Tedesco, A. D., Piotto, V., Sponchia, G., Hossain, K., Litti, L., Peddis, D., Scarso, A., Meneghetti, M., Benedetti, A., & Riello, P. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b01982 · Cited by 20
Self-citationAg2V4O11 nanostructures for highly ethanol sensitive performance
Liang, Y., Zhu, L. F., Liu, P., Li, H. B., Xiao, J., Ji, X. W., & Yang, G. W. (2013) · CrystEngComm · doi:10.1039/c3ce40787j · Cited by 19 · cited 1×
“So, Liang and co-workers used three different kinds of combinations, vanadium (target) + copper (electrode) [132], vanadium (target) + silver (electrode) [133] and molybdenum (target) + zinc (electrode) [6], to synthesize ZnMoO4 microand nanoplates and rods, Cu3(OH)2V2O7·2H2O flower-like nanostructures, and Ag2V4O11 b…”
MethodFabrication Of High Stable Gold Nanofluid By Pulsed Laser Ablation In Liquids
Torres–Mendieta, R., & Mondrag, R. (2015) · Advanced Materials Letters · doi:10.5185/amlett.2015.6038 · Cited by 19 · cited 1×
“In addition, NPs prepared by the Laser Ablation in Liquids (LAL) have been recently used for various and unique applications like friction reduction [34], solar nanofluids [35,36], optical limiting devices [37,38] and so on.”
MethodKonda, S. R., Ganeev, R. A., Zhang, K., Fu, Y. C., Boltaev, G. S., Krishnendu, P. S., Redkin, P. V., & Guo, C. (2018) · Journal of Nanoparticle Research · doi:10.1007/s11051-018-4391-3 · Cited by 18 · cited 1×
“In addition, NPs prepared by the Laser Ablation in Liquids (LAL) have been recently used for various and unique applications like friction reduction [34], solar nanofluids [35,36], optical limiting devices [37,38] and so on.”
MethodSmejkal, P., Pfleger, J., Vlcková, B., & Dammer, O. (2007) · Journal of Physics: Conference Series · doi:10.1088/1742-6596/59/1/040 · Cited by 18
Role of a dissolved gas in the optical breakdown of water
Bunkin, N. F., & Bakum, S. I. (2006) · Quantum Electronics · doi:10.1070/qe2006v036n02abeh013113 · Cited by 18
Plasmon-Enhanced Controlled Drug Release from Ag-PMA Capsules
Neri, G., Corsaro, C., & Fazio, E. (2020) · Molecules · doi:10.3390/molecules25092267 · Cited by 17 · cited 2×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundSelf-citationNear-infrared laser-induced breakdown of liquid benzene
Toyota, K., Nakashima, S., & Okada, T. (2000) · Chemical Physics Letters · doi:10.1016/s0009-2614(00)00532-7 · Cited by 17 · cited 4×
“Additionally, one to two magnitudes of higher intensity thresholds for the optical breakdown of water are valid for femtosecond (1012 W/cm2) compared to nanosecond (1010 W/cm2) pulses.”
BackgroundInfluentialMazzuca, C., Di Napoli, B., Biscaglia, F., Ripani, G., Rajendran, S., Braga, A., Benna, C., Mocellin, S., Gobbo, M., Meneghetti, M., et al. (2019) · Nanoscale Advances · doi:10.1039/c9na00096h · Cited by 16 · cited 1×
“We have prepared nanostructures with the following peptides: GE11, which targets epidermal growth factor receptors (EGFRs) expressed in different types of tumors [172,181], RGD for v3 integrin, an adhesion receptor found in tumors at metastatic level [182], targeting and PreS1 for SerpinB3, a protein overexpressed by…”
MethodSelf-citationPicca, R. A., Maria, A. D., Riháková, L., Volpe, A., Sportelli, M. C., Lugarà, P. M., Ancona, A., & Cioffi, N. (2016) · MRS Advances · doi:10.1557/adv.2016.336 · Cited by 16 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundTransformation of Gold Nanorods in Liquid Media Induced by nIR, Visible, and UV Laser Irradiation
Attia, Y. A., Flores-Arias, M. T., Nieto, D., Vázquez-Vázquez, C., De La Fuente, G. F., & López-Quintela, M. A. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b03046 · Cited by 16 · cited 2×
“nanorods [151,152], gold nanostars [153] and silver nanoplates [154,155].”
BackgroundFazio, E., Saija, R., Santoro, M., Abir, S., Neri, F., Tommasini, M., & Ossi, P. M. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.0c05270 · Cited by 15 · cited 2×
“Much more complex is the situation in all those cases where the NP has a shape far from spherical-like and proper simulations about the plasmonic response should be conducted to interpret the response [142,144,145].”
BackgroundSelf-citationLaser-induced breakdown in organic liquids
Fujii, H., Yoshino, K., & Inuishi, Y. (1977) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/10/14/014 · Cited by 15 · cited 1×
“[110] found a decrease in the breakdown threshold for an increasing chain length or molecular weight using IR, nanosecond pulses.”
BackgroundJumaa, T., Chasib, M., Hamid, M. K., & Al-Haddad, R. M. S. (2014) · Nanoscience and nanotechnology research · doi:10.12691/nnr-2-1-1 · Cited by 15
Fazio, E., Leonardi, S. G., Santoro, M., Donato, N., Neri, G., & Neri, F. (2018) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.01.217 · Cited by 14 · cited 2×
“As discussed in [212], XRD and XPS results show that ablation of Rh in water leads to the production of mixed Rh/Rh-oxide phases (RhO2 and Rh2O3), whereas in ethanol essentially metallic Rh NPs are produced, in agreement with [216].”
BackgroundResultSelf-citationScardaci, V., Pulvirenti, M., Condorelli, M., & Compagnini, G. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc00367k · Cited by 14 · cited 4×
“formation of particles with S = 460 nm/RIU [170] (Figure 16b).”
BackgroundInfluentialSelf-citationUse of nano gold obtained by laser ablation for SEIRA analyses of colorants
Prati, S., Quaranta, M., Sciutto, G., Bonacini, I., Litti, L., Meneghetti, M., & Mazzeo, R. (2014) · Heritage Science · doi:10.1186/s40494-014-0028-8 · Cited by 14
Self-citationOptimization of silver nanoparticles production by laser ablation in water using a 150-ps laser
Stašić, J., Živković, L. S., & Trtica, M. S. (2016) · Journal of Nanoparticle Research · doi:10.1007/s11051-016-3672-y · Cited by 13
Ablation of ceramics with ultraviolet, visible, and infrared nanosecond laser pulses:
Nedialkov, N. N., Atanasov, P. A., Sawczak, M., & Sliwinski, G. (2003) · SPIE Proceedings · doi:10.1117/12.515847 · Cited by 13 · cited 2×
“Note that for semiconducting and dielectric materials the initial ablation rate in absence of a light-extinction colloid can be higher at red and near IR wavelengths under specific conditions due to differences in the ablation mechanism compared to metals [80,81].”
BackgroundCatalytic and Photothermo-catalytic Applications of TiO 2 -CoO x Composites
Fiorenza, R., Condorelli, M., D’Urso, L., Compagnini, G., Bellardita, M., Palmisano, L., & Scirè, S. (2020) · Journal of Photocatalysis · doi:10.2174/2665976x01666200219113505 · Cited by 13 · cited 1×
“[270] by introducing Co oxides into TiO2: TiO2-CoOx composites exhibit a maximum decrease of the TiO2 band gap of about 0.”
Self-citationSurfactant-assisted shape separation from silver nanoparticles prepared by a seed-mediated method
Hu, G., Jin, W., Zhang, W., Wu, K., He, J., Zhang, Y., Chen, Q., & Zhang, W. (2018) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2017.12.071 · Cited by 12 · cited 3×
“LSPs arise from collective oscillations of the free electrons of metal nanoparticles and show resonances in the visible and near infrared spectral range, depending on shape, dimensions and aggregation of the nanostructures, with very large extinction cross sections if compared to organic dyes [154].”
BackgroundD’Urso, L., Spadaro, S., Bonsignore, M., Santangelo, S., Compagnini, G., Neri, F., & Fazio, E. (2018) · EPJ Web of Conferences · doi:10.1051/epjconf/201816704008 · Cited by 10 · cited 1×
“[259] prepared ZnO and ZnO/Au in the form of nanocolloids and nanorods by picosecond pulsed laser ablation in water.”
MethodSelf-citationMolybdenum oxide nanocolloids prepared by an external field-assisted laser ablation in water
Spadaro, S., Bonsignore, M., Fazio, E., Cimino, F., Speciale, A., Trombetta, D., Barreca, F., Saija, A., & Neri, F. (2018) · EPJ Web of Conferences · doi:10.1051/epjconf/201816704009 · Cited by 9 · cited 1×
“[140,141] that deal with the synthesis of Mo oxide nanocolloids using a focused picosecond-pulsed laser beam (λ = 532 nm, repetition rate = 100 kHz, pulse width = 6–8 ps).”
Self-citationScale-up of nanoparticle production during laser ablation of ceramics in liquid media
Sattari, R., Sajti, C. L., Khan, S., & Barcikowski, S. (2008) · ICALEO 2008: 27th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing · doi:10.2351/1.5061412 · Cited by 8 · cited 4×
“[84] found that the productivity of LAL can be increased by reducing the spatial”
BackgroundInfluentialSpectral Modeling of Hydrogen Radiation Emission in Magnetic Fusion Plasmas
Koubiti, M., & Sheeba, R. R. (2019) · Atoms · doi:10.3390/atoms7010023 · Cited by 7
Single File Flow of Biomimetic Beads for Continuous SERS Recording in a Microfluidic Device
Calzavara, D., Ferraro, D., Litti, L., Cappozzo, G., Mistura, G., Meneghetti, M., & Pierno, M. (2018) · Advances in Condensed Matter Physics · doi:10.1155/2018/2849175 · Cited by 7
Self-citationLaser Synthesized Nanoparticles for Therapeutic Drug Monitoring
Tommasini, M., Zanchi, C. G., Lucotti, A., Fazio, E., Santoro, M., Spadaro, S., Neri, F., Trusso, S., Ciusani, E., de Grazia, U., et al. (2018) · Springer series in materials science · doi:10.1007/978-3-319-96845-2_12 · Cited by 6 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationWaag, F. (2019) · DuEPublico: Duisburg-Essen Publications online, University of Duisburg-Essen, Germany · doi:10.17185/duepublico/71120 · Cited by 4 · cited 4×
“Liquid Environment: The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
BackgroundMethodInfluentialSelf-citation
Research works printed but not linked: 10
- Stafe M. Negutu C. Puscas N.N. Popescu I. Pulsed laser ablation of solids Rom. Rep. Phys. 2010 62 758 770
- Nedialkov N.N. Atanasov P.A. Sawczak M. Sliwinski G. Ablation of ceramics with ultraviolet, visible, and infrared nanosecond laser pulses Proceedings of the XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers Wrocław, Poland 25–30 August 2002 703 709
- Al-Haddad R.M.S. Hamid M.K. Jumaa T. Electric field effect on the synthesis of nanogold particles by PLAL Int. J. Chem. Nat. Sci. 2015 3 269 274
- Santoro M. Fazio E. Trusso S. Ossi P.M. Tommasini M. Neri F. Rhodium nanoparticles synthesized by nanosecond and picosecond Pulsed Laser Ablation in Liquid. GISR2016 Proceedings of the Italian Meeting on Raman Spectroscopy and Non Linear Optic Effects Padova, Italy 14–16 September 2016
- Santoro M. Bertoncini A. Fazio E. Tommasini M. Neri F. Ossi P.M. Trusso S. Nanostructured Rhodium Thin Films Deposited by Pulsed Laser Deposition for SERS Detection. CNS2018—4° Proceedings of the Congresso Nazionale Sensori Catania, Italy 21–23 February 2018
- Eibner A. Action of Light on Pigments Chem. Ztg. 1911 35 753 775
- Keidel E. The Fading of Aniline Dyes in the Presence of Titanium White Farben Ztg. 1929 34 1242 1243
- Osugi M. Aoki S. On the photoxidation of ammonium compounds in solution and soil Jpn. J. Soil Manure. 1936 10 11 24
- Frenkel J. On the Absorption of Light and the Trapping of Electrons and Positive Holes in Crystalline Dielectrics Phys. Zs. Sowjetunion. 1936 9 158 186
- Negrea P. Sidea F. Negrea A. Lupa L. Ciopec M. Muntean C. Stuies regarding the Benzene, Toluene and o-Xylene Removal from Waste Water Politeh. Univ. 2008 53 1 2
Cited by
Fazio, E., Spadaro, S., Corsaro, C., Neri, G., Leonardi, S. G., Neri, F., Lavanya, N., Sekar, C., Donato, N., & Neri, G. (2021) · Sensors · doi:10.3390/s21072494 · Cited by 274
Self-citationZoubi, W. A., Putri, R. A. K., Abukhadra, M. R., & Ko, Y. G. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108362 · Cited by 142
Yogesh, G. K., Shukla, S., Sastikumar, D., & Koinkar, P. (2021) · Applied Physics A · doi:10.1007/s00339-021-04951-6 · Cited by 149
Khairani, I. Y., Mínguez-Vega, G., Doñate-Buendía, C., & Gökce, B. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp01214j · Cited by 130
Self-citationSynergistic antibacterial mechanism of silver-copper bimetallic nanoparticles
Hao, Z., Wang, M., Cheng, L., Si, M., Feng, Z., & Feng, Z. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1337543 · Cited by 125
“Compared to several prevalent manufacturing techniques, PLAL offers faster production of BNPs and effective control over the size distribution, yield, and shape of nanoparticles (Fazio et al., 2020; Nyabadza et al., 2023).”
Method
Metadata
- Authors
- Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., Dell’Aglio, M., D’Urso, L., Condorelli, M., Scardaci, V., Biscaglia, F., Litti, L., Gobbo, M., Gallo, G., Santoro, M., Trusso, S., & Neri, F.
- Affiliations
- University of Messina (IT)
- University of Duisburg-Essen (DE)
- Department of Chemistry, University of Bari, Via Orabona 4, 70126 Bari, Italy
- University of Padua (IT)
- University of Catania (IT)
- Politecnico di Milano (IT)
- Istituto di Nanotecnologia (IT)
- STMicroelectronics (Italy) (IT)
- Institute for Chemical and Physical Processes (IT)
- Corresponding author
- Fazio, Enza
- ORCID
- Fazio, Enza
- Gökce, Bilal
- De Giacomo, Alessandro
- Meneghetti, Moreno
- Compagnini, Giuseppe
- Tommasini, Matteo
- Waag, Friedrich
- Lucotti, Andrea
- Zanchi, Chiara Giuseppina
- Ossi, Paolo Maria
- Dell’Aglio, Marcella
- D’Urso, Luisa
- Condorelli, Marcello
- Scardaci, Vittorio
- Litti, Lucio
- Gobbo, Marina
- Gallo, Giovanni
- Trusso, Sebastiano
- Neri, Fortunato
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2020-11-23
- Volume
- 10
- Issue
- 11
- Pages
- 2317
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC7700616
- OpenAlex
- W3108657096
- Cited by
- 346
- References
- 288
- Citations by year
- 2026: 62 · 2025: 83 · 2024: 65 · 2023: 66 · 2022: 45 · 2021: 24
- FWCI
- 2.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- CINECA IRIS Institutional Research Information System (University of Bari Aldo Moro) (submittedVersion)
- Padua Research Archive (University of Padova) (submittedVersion, cc-by)
- Funders
- Università degli Studi di Padova (04SID2016, 08SID2017)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
- Keywords
- pulsed laser ablation in liquid, laser synthesis, ligand-free nanoparticles, nanocolloids, functionalized nanomaterials, scalable nanoparticle synthesis, biomedical applications, catalysis, sensing, energy applications, environmental applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.