Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Open accessThe DOI matches its Crossref record; 279 of the 288 references it cites were found in a registry or an index; 29 of the 288 sources its claims cite were checked for support.
Abstract
Laser synthesis emerges as a suitable technique to produce ligand-free nanoparticles, alloys and functionalized nanomaterials for catalysis, imaging, biomedicine, energy and environmental applications. In the last decade, laser ablation and nanoparticle generation in liquids has proven to be a unique and efficient technique to generate, excite, fragment and conjugate a large variety of nanostructures in a scalable and clean way. In this work, we give an overview on the fundamentals of pulsed laser synthesis of nanocolloids and new information about its scalability towards selected applications. Biomedicine, catalysis and sensing are the application areas mainly discussed in this review, highlighting advantages of laser-synthesized nanoparticles for these types of applications and, once partially resolved, the limitations to the technique for large-scale applications.
Overview
CoChat Summary
TL;DR
This review surveys pulsed laser ablation in liquids (LAL) as a chemically clean route to ligand-free nanoparticles, alloys, and functional nanomaterials for biomedicine, catalysis, sensing, energy, and environmental applications. It concludes that LAL offers strong control over purity, crystal structure, and size distribution, but large-scale application still requires better colloidal stability, surface control, and defined gram-scale protocols.
Key findings
- LAL is presented as a scalable and clean synthesis route for nanocolloids, with applications in plasmonic sensing, nanomedicine, catalysis, and pollutant degradation; however, the review states that LAL colloids are “not yet applicable on a large scale.”
- Process parameters strongly affect productivity: IR laser light generally gives higher metal productivity than UV or Vis, but short wavelengths can become less productive at high colloid concentrations due to NP shielding; an optimum pulse duration is probably around single picoseconds. Electric-field-assisted LAL increased ablation rate by a factor of three, about 300 mg/30 min versus 100 mg/30 min without the field.
- Plasmonic tuning is demonstrated: Au/Ag alloy colloids can tune plasmon resonance continuously from about 400 nm (Ag) to 520 nm (Au); Ag spherical NPs showed higher plasmon sensitivity (125 nm/RIU) than Au NPs (45 nm/RIU), with roughly threefold increase after conversion to nanoplates and S = 460 nm/RIU after 730 nm irradiation.
- In photocatalysis, blue titania removed 76% of benzene after 80 min, while AuTiO2 left less than 1% residual benzene; after 5 min, BTX decreased by 53% with Au-decorated TiO2, 26% with blue TiO2, and 14% with commercial TiO2. Apparent rate constants increased from 1.4 × 10−2 min−1 (bare TiO2) to 3.8 × 10−2 min−1 (blue TiO2) and 8.3 × 10−2 min−1 (Au-loaded TiO2).
Methods
- Design: narrative review/overview of LAL fundamentals, process parameters, upscaling, and selected applications, not a primary systematic experimental study.
- Data/sample: synthesizes literature and the authors’ own contributions on ns/ps/fs LAL of metals and semiconductors in water and organic solvents, field-assisted LAL, plasmonic Au/Ag/Rh nanocolloids, SERS-based targeting, and TiO2/ZnO photocatalysis including BTX-contaminated industrial waters.
- Main analysis: qualitative and quantitative synthesis of cited experimental results, including optical emission spectroscopy, XRD/XPS, Raman/SERS, UV–Vis, plasmon sensitivity measurements, and photocatalytic degradation kinetics.
Limitations
- The paper states that LAL colloids are not yet large-scale applicable; reaching gram-scale production requires a properly defined LAL procedure and protocol, higher colloidal stability, and prevention of aggregation and larger-particle formation.
- It states that “ligand/surfactant-free” LAL NPs are not totally naked and still bear surface chemistry, with some surface atoms oxidized or complexed; an appropriate protocol for performance-oriented colloidal synthesis and isochronous surface modification is still not defined.
- The text also notes practical limits for nanoadsorption/nanophotocatalysis, the need for higher UV-SERS signal-to-noise, moderate Rh SERS enhancement with photo-degradation under 457 nm irradiation, and that the literature lacks full-range parameter data for productivity evaluation; as a review, it also relies on cited studies and selected examples rather than exhaustive primary data.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Figures


![Figure 3 (a) Image of laser-induced plasma on Al target immersed in water, acquired with ICCD camera. (b) Plasma temperature 2D map calculated as reported in [43] (Al target in MilliQ water, Elaser = 270 mJ, laser crater size = 1 ± 0.2 mm, λlaser = 532 nm, laser pulse duration = 6 ns, laser frequency = 10 Hz, delay time = 40 ns, gate width = 20 ns). (c) 3D representation of plasma temperature in (b).](https://figures.cochat.ai/paper-figures/96cfaa719e534646880c2f1310e9d25d/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-3.jpg)
![Figure 4 Time resolved shadowgraphy images of the laser induced bubble on Ag target immersed in water (a) and the corresponding bubble radius compared with the number of ejected Ag NPs during the bubble evolution (as calculated in [44]) (b). Experimental conditions: laser energy = 108 mJ, laser frequency = 2 Hz, laser crater size = 1 ± 0.2 mm, ICCD gate width = 20 µs and 5 accumulations for each image.](https://figures.cochat.ai/paper-figures/2fa383cc466a48779a6320553abcd0fe/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-4.jpg)
![Figure 5 Dependence graph of process parameters, arranged in component clusters, relevant to LAL up-scaling. If not marked differently by an arrow, the flow goes from the left to the right in horizontal direction and from the outside to the inside in vertical direction. Colors were used only for an improved overview. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/cde1d6599a99445b96e13723f9ab45f6/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-5.jpg)
![Figure 6 Schematic of the laser ablation of metals in liquids at different wavelengths in absence (a) and presence (b) of colloidal particles. Equal energy densities were assumed for all laser spots. The diagram in (c) (linear scales for both axes) demonstrates the effect of an increasing colloidal concentration on the NP productivity in LAL at different wavelengths. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/78878d1c8aa84446bff81498c7ff288c/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-6.jpg)
![Figure 7 Illustration of the laser ablation of metals in liquids at different fluences varied by the pulse energy (a) and the working distance (b). The diagram in (c) demonstrates how the fluence variation caused by different initial spot sizes affects the NP productivity in LAL in the high-fluence regime. A Gaussian beam profile was assumed. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. The arrow and the less dense (dashed) line style in (c) indicate the trend in productivity induced by a smaller initial spot size. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/69dcd42ab0de4a2581b8c3957bcdb61a/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-7.jpg)
![Figure 8 Illustration of the laser ablation of metals in liquids at different pulse durations neglecting non-linear effects. Thermal losses (a) and self-shielding by plasma (b) of pulses of different duration regimes. The diagram in (c) demonstrates how the coupling constant of electrons and phonons affects the NP productivity in LAL, depending on the laser pulse duration. A change of the coupling constant was assumed to have no influence on other material properties. In (c), the y-axis scales linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense (dashed) line style indicate the effect of a longer coupling time of electrons and phonons of the target material on productivity. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/082c9541edfe4142a53c0bd091799e62/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-8.jpg)
![Figure 9 Illustration of the optical breakdown of the liquid during the laser ablation of metals in liquids at different intensities neglecting non-linear effects. Dependence of the occurrence of the optical breakdown on the laser pulse duration (a) and on the colloid concentration (b). Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/67a4968f676d47e8a3d8c4f31c27e126/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-9.jpg)
![Figure 10 Illustration of a too short (a) and an appropriate (b) interpulse distance in the laser ablation of metals in liquids. The diagram in (c) demonstrates relative effects of different laser pulse durations on the dependence of the productivity on the inter-pulse distance. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense line style indicate the effect of a longer laser pulse duration on productivity. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/80abd62fefc240409da8004f1150f734/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-10.jpg)
![Figure 11 Illustration of the effect of the liquid flow rate (a) and of the liquid layer height (b) on the productivity in the laser ablation of metals in liquids. The diagram in (c) demonstrates relative effects of different liquid layer heights on the dependence of the productivity on the volume flow rate. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the dashed line shows the effect of lower liquid layer height on the productivity, and the dashed line shows the effect of a too low liquid layer height compared to the solid line, respectively. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/163ce9e6e4d240d8b028b2943d6757ad/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-11.jpg)
![Figure 12 Illustration of the effect of the target thickness in the laser ablation of metals in liquids (a) and the influence of the laser pulse duration on the heat confinement in thin targets (b). The diagram in (c) demonstrates relative effects of different laser pulse duration on the dependence of the productivity on the ablation target thickness. In (c), both axes scale linearly. The trends shown in the diagram represent the interpretation of the combined results of the discussed literature in Section 2.2.1. In (c), the arrow and the less dense line style indicate the effect of longer pulse duration on productivity. In (c), the vertical solid line in the center of the diagram marks the penetration depths of the laser pulse into the target material. Reprinted with permission from [66].](https://figures.cochat.ai/paper-figures/9affca35ffcc431a827e3dce2b836b79/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-12.jpg)


![Figure 15 Optical absorption spectra of spherical vs triangular silver NPs (a); SEM image of spherical NPs (b) and of triangular nanoparticles (c) TEM image and in the inset AFM profiles of triangular NPs (d). Reprinted from Ref. [156], Copyright (2019), with permission from Elsevier.](https://figures.cochat.ai/paper-figures/e83c97438fba4994acc9a4ac03278118/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-15.jpg)
![Figure 16 Plasmon sensitivity measurements from gold and silver spherical nanoparticles, obtained by laser ablation in water, and silver triangular nanoplates obtained by white light irradiation of the same spherical NPs (a); plasmon sensitivity measurements from triangular NPs obtained from monochromatic light irradiation of spherical NPs (also shown) obtained by laser ablation (b). Figure 16a reprinted from Ref. [156], Copyright (2019), with permission from Elsevier. Figure 16b reprinted from Ref. [170], with the permission of The Royal Society of Chemistry.](https://figures.cochat.ai/paper-figures/8536c795c71b46dfb0ce0c8ab3fba3ac/nanoparticles-engineering-by-pulsed-laser-ablation-in-liquids-concepts-and-figure-16.jpg)





Verification
Claims the paper makes
22 Valid · 9 Not valid · 150 Not checked · 135 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“All studies agree independently from the ablated matter, the chosen liquid and the used laser pulse duration on a higher productivity by using IR laser light compared to UV or Vis.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Partly supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 sourceExperimental — accuracy not yet measured
The Results and discussion and Conclusions report higher nanoparticle productivity at the fundamental IR wavelength than at the visible second harmonic wavelength for Ag, Zn, and Mg ablated with picosecond pulses in polyurethane-doped tetrahydrofuran. The Introduction also reports similar findings from several studies using nanosecond pulses. These passages do not establish agreement among all studies regardless of material, liquid, or pulse duration, and the paper does not test a UV comparison. Page numbers were not provided for these passages. (LLM, conf=0.88)
- Not checked yetcites [67] Tsuji T. Iryo K. Ohta H. Nishimura Y. Preparation of Metal Colloids by a Laser Ablation Technique in Solution: Influence of Laser Wavelength on the Efficiencies of Colloid Formation Jpn. J. Appl. Phys. 2000 39 L981 L983 10.1143/JJAP.39.L981 source
Checked before — its earlier verdict is held back until a new check runs.
- Not matchedcites [68] Šmejkal P. Pfleger J. Vlčková B. Dammer O. Laser ablation of silver in aqueous ambient: Effect of laser pulse wavelength and energy on efficiency of the process J. Physics: Conf. Ser. 2007 59 185 188 10.1088/1742-6596/59/1/040
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The basic mechanisms inducing the laser ablation in liquid, as well as their dependence on laser pulse properties, do not differ notably, with respect of laser ablation in gaseous environment [54].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.1. Mechanism in ns-Pulsed Laser Ablation in Liquid for the Production of Metallic Nanoparticles
What the sources say
- Partly supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says pulse duration changes the ablation mechanism in liquid, and the Results and discussion report effects of wavelength and fluence. The paper does not compare those mechanisms or their dependence on pulse properties with ablation in a gaseous environment, so the claimed similarity is unsupported. (LLM, conf=0.78)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Rests on an assumption not shown here.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“The absence of the typical atomic spectral lines of the LIP expanding in a gaseous environment is due to the high density reached by the ablated matter under liquid confinement as discussed in [40,41,42].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.1. Mechanism in ns-Pulsed Laser Ablation in Liquid for the Production of Metallic Nanoparticles
What the sources say
- Could not verifycites [40] Wagener P. Barcikowski S. Laser fragmentation of organic microparticles into colloidal nanoparticles in a free liquid jet Appl. Phys. A 2010 101 435 439 10.1007/s00339-010-5814-x sourceExperimental — accuracy not yet measured
Our copy of Wagener, Philipp & Barcikowski (2010) covers laser fragmentation of melamine cyanurate microcrystals in a free liquid jet, with UV/VIS, DLS and TEM characterization (Abstract; §1 Introduction; §3 Results and discussion); its only mention of plasma is mechanistic — 'a focused laser pulse which generates a plasma and a subsequent shock wave within the microparticles' (§3). No passage addresses optical emission spectroscopy of the laser-induced plasma, atomic spectral lines, or their suppression under liquid confinement versus gaseous expansion (searched: 'absence of atomic spectral lines … liquid confinement', 'plasma emission shielding confining medium density', 'atomic emission lines plasma spectroscopy'). The claim's point is therefore not treated in our copy, neither supported nor contradicted. (LLM, conf=0.72)
- Not checked — no full text of the sourcecites [41] Amendola V. Polizzi S. Meneghetti M. Free Silver Nanoparticles Synthesized by Laser Ablation in Organic Solvents and Their Easy Functionalization Langmuir 2007 23 6766 6770 10.1021/la0637061 17489616 source
- Partly supportedcites [42] Chemin A. Lam J. Laurens G. Trichard F. Motto-Ros V. LeDoux G. Jary V. Laguta V. Nikl M. Dujardin C. Doping nanoparticles using pulsed laser ablation in a liquid containing the doping agent Nanoscale Adv. 2019 1 3963 3972 10.1039/C9NA00223E PMC9419851 36132111 sourceExperimental — accuracy not yet measured
The Introduction describes a hot, dense plasma produced by laser ablation in liquid. It does not say that this density causes typical atomic spectral lines to be absent. The Experimental section’s LIBS measurements report atomic emission lines, but those measurements were made with argon gas flowing through the plasma region, not in the liquid-confined plume. (LLM, conf=0.78)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Could not verify
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“This is strongly indicated by the observed smaller NP diameters at shorter applied wavelengths [54,69,70], which may be the result of fragmentation induced by subsequent laser pulses during batch-LAL.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 source
The Results and discussion section (page unavailable) reports that, for silver colloids, particle diameter decreased more sharply at the shorter wavelength (515 nm) than at 1030 nm. It says the decrease could be attributed to fragmentation of dispersed nanoparticles during post-irradiation, matching the claim's tentative explanation. (LLM, conf=0.89)
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
hedgedstates a possible cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The laser wavelength essentially influences the ablation rate in LAL [54,67,68,69,70].”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 2. LAL Synthesis Methods: Principle, Process Parameters and Liquids Effects on Nanoparticle Formation > 2.2. Upscaling of Laser Synthesis of Colloids
What the sources say
- Supportedcites [54] Schwenke A. Wagener P. Nolte S. Barcikowski S. Influence of processing time on nanoparticle generation during picosecond-pulsed fundamental and second harmonic laser ablation of metals in tetrahydrofuran Appl. Phys. A 2011 104 77 82 10.1007/s00339-011-6398-9 source
The Results and discussion report that silver ablation at 1030 nm maintained a linear ablation rate, whereas at 515 nm losses of excitation light led to saturation of cumulative ablated mass. The Conclusions likewise identify laser wavelength as a factor in ablation efficiency, while noting that pulse energy, fluence, and colloidal properties also matter. (LLM, conf=0.90)
- Supportedcites [67] Tsuji T. Iryo K. Ohta H. Nishimura Y. Preparation of Metal Colloids by a Laser Ablation Technique in Solution: Influence of Laser Wavelength on the Efficiencies of Colloid Formation Jpn. J. Appl. Phys. 2000 39 L981 L983 10.1143/JJAP.39.L981 source
The paper's entire subject is the wavelength dependence of ablation in laser ablation in solution: Section 3.1/Experimental states that 'the efficiency of the colloid formation increases as the wavelength decreases' and that 'the ablation efficiency is larger at shorter wavelengths than at longer wavelengths over the entire fluence range' (nonfocused 355/532/1064 nm, Ag target in water). Section 3.2 adds that under focused irradiation the relation between ablation efficiency and focusing 'significantly depends on the irradiation wavelength', with the dependence reversing to longer wavelengths, described as 'characteristic of laser ablation in solution'. The only nuance is that our copy quantifies ablation/colloid-formation efficiency via the 400 nm plasmon absorbance rather than a target mass-removal rate, but the attributed point — that wavelength strongly governs the ablation yield in LAL — is stated directly. (LLM, conf=0.85)
- Not matchedcites [68] Šmejkal P. Pfleger J. Vlčková B. Dammer O. Laser ablation of silver in aqueous ambient: Effect of laser pulse wavelength and energy on efficiency of the process J. Physics: Conf. Ser. 2007 59 185 188 10.1088/1742-6596/59/1/040
We searched by its title and found no matching paper.
- Not checked — no full text of the sourcecites [69] Intartaglia R. Bagga K. Brandi F. Study on the productivity of silicon nanoparticles by picosecond laser ablation in water: Towards gram per hour yield Opt. Express 2014 22 3117 3127 10.1364/OE.22.003117 24663602 source
- Not checked — no full text of the sourcecites [70] Kim J. Reddy D.A. Ma R. Kim T.K. The influence of laser wavelength and fluence on palladium nanoparticles produced by pulsed laser ablation in deionized water Solid State Sci. 2014 37 96 102 10.1016/j.solidstatesciences.2014.09.005 source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
179 more claims · 11 with their cited sources checked
Create a free account to see all 316 claims and to verify the 32 references still open.
- It may state two separate claims as one. 94
- The quote only partly states this claim. 5
- Probably not a substantial claim. 43
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 3. Promising Applications of LAL Nanostructures for Biotechnology Applications and for Organic Pollutants Degradation > 3.1. Plasmonic Properties of Metal Nanoparticles and Plasmon Sensitivity
“It has to be noted that Equation (1) is strictly valid only for spherical particles, while for particles with different shapes, the geometry must be taken into account and a plasmon resonance shift can be expected.”
§ Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications > 3. Promising Applications of LAL Nanostructures for Biotechnology Applications and for Organic Pollutants Degradation > 3.1. Plasmonic Properties of Metal Nanoparticles and Plasmon Sensitivity
“In this case the polarizability is expressed as:(11)α=4πε0R3ε−εmε+2εm where ε is the dielectric function [ε1(ω)+iε2(ω)] and R the radius of the NP.”
Cited works that were retracted
Works this paper cites that were later retracted, from the retraction notices publishers deposit. Major when the notice came out before this paper was published.
A note, not an issue: for example, a cited work that was retracted only after this paper was published, which its authors could not have known.
In the paper
“The availability of a consistent SERS enhancement in the deep-UV spectral region would therefore allow recording Raman spectra with very low excitation power [190,209], which would be beneficial to reduce photo-degradation issues.”
Cited work 10.1039/c8an00341f · retracted 2021-07-06 · notice 10.1039/d1an90061g · this paper published 2020-11-23
Citations
Cites
1 retracted
Das, R., & Soni, R. K. (2018) · The Analyst · doi:10.1039/c8an00341f · Cited by 11 · cited 1×
“The availability of a consistent SERS enhancement in the deep-UV spectral region would therefore allow recording Raman spectra with very low excitation power [190,209], which would be beneficial to reduce photo-degradation issues.”
BackgroundRetractedElectrochemical Photolysis of Water at a Semiconductor Electrode
FUJISHIMA, A., & HONDA, K. (1972) · Nature · doi:10.1038/238037a0 · Cited by 34,169 · cited 6×
“In the second part of ‘900, after Fujishima and Honda (1972) discussed the photocatalytic water splitting on a TiO2 electrode [242], environmental applications (energy production and degradation of organic pollutants) using solar light and semiconductor oxides became one of the attractive topics of photocatalysis.”
BackgroundInfluentialAbsorption and Scattering of Light by Small Particles
Bohren, C. F., & Huffman, D. R. (1998) · doi:10.1002/9783527618156 · Cited by 18,474
Biosensing with plasmonic nanosensors
Anker, J. N., Hall, W. P., Lyandres, O., Shah, N. C., Zhao, J., & Van Duyne, R. P. (2008) · Nature Materials · doi:10.1038/nmat2162 · Cited by 6,786
Plasmonics beyond the diffraction limit
Gramotnev, D. K., & Bozhevolnyi, S. I. (2010) · Nature Photonics · doi:10.1038/nphoton.2009.282 · Cited by 3,903 · cited 2×
“Much more complex is the situation in all those cases where the NP has a shape far from spherical-like and proper simulations about the plasmonic response should be conducted to interpret the response [142,144,145].”
BackgroundShell-isolated nanoparticle-enhanced Raman spectroscopy
Li, J. F., Huang, Y. F., Ding, Y., Yang, Z. L., Li, S. B., Zhou, X. S., Fan, F. R., Zhang, W., Zhou, Z. Y., Wu, D. Y., et al. (2010) · Nature · doi:10.1038/nature08907 · Cited by 3,559
TiO2 Photocatalysis: A Historical Overview and Future Prospects
Hashimoto, K., Irie, H., & Fujishima, A. (2005) · Japanese Journal of Applied Physics · doi:10.1143/jjap.44.8269 · Cited by 3,367 · cited 1×
“The discovery of photoinduced water splitting together with other results such as photoinduced redox reactions of adsorbed substances on TiO2 by UV irradiation [243] and the decomposition of CN− ions in UV-irradiated aqueous TiO2 suspensions [244] have significantly expanded the field of application of TiO2 based phot…”
BackgroundReview on nanoparticles and nanostructured materials: history, sources, toxicity and regulations
Jeevanandam, J., Barhoum, A., Chan, Y. S., Dufresne, A., & Danquah, M. K. (2018) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.9.98 · Cited by 3,297 · cited 1×
“, edible and nontoxic nano-delivery systems, or effective formulations that are safe for human consumption and drug treatments [22].”
BackgroundDecontamination and disinfection of water by solar photocatalysis: Recent overview and trends
Malato, S., Fernández-Ibáñez, P., Maldonado, M. I., Blanco, J., & Gernjak, W. (2009) · Catalysis Today · doi:10.1016/j.cattod.2009.06.018 · Cited by 3,004 · cited 3×
“The main redox reactions are summarized by Horikoshi and Malato [250,251] as follows: e− + O2 → O−·2 O−·2 (ads) + H + → HO·2(ads) h+ + H2O→ ·OH(ads) + H+ h+ + O−·2 (ads)→ 2O·(ads) h+ + P→ P·+ (14) Then, oxygen and pollutant radicals further react to give oxidation of organic products.”
BackgroundHeberer, T. (2002) · Toxicology Letters · doi:10.1016/s0378-4274(02)00041-3 · Cited by 2,995
Recent developments of zinc oxide based photocatalyst in water treatment technology: A review
Lee, K. M., Lai, C. W., Ngai, K. S., & Juan, J. C. (2016) · Water Research · doi:10.1016/j.watres.2015.09.045 · Cited by 2,341 · cited 1×
“With the characteristics of nontoxicity, good stability and a special ability to oxidize, decompose toxic organic pollutants, resist corrosion, low cost and durability, TiO2 and ZnO-based NPs are the most versatile semiconductor photocatalysts [225,226].”
BackgroundHaes, A. J., & Van Duyne, R. P. (2002) · Journal of the American Chemical Society · doi:10.1021/ja020393x · Cited by 2,057
Explaining the Enhanced Photocatalytic Activity of Degussa P25 Mixed-Phase TiO 2 Using EPR
Hurum, D. C., Agrios, A. G., Gray, K. A., Rajh, T., & Thurnauer, M. C. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp0273934 · Cited by 2,015
Solar photocatalytic degradation of azo dye: comparison of photocatalytic efficiency of ZnO and TiO2
Sakthivel, S., Neppolian, B., Shankar, M. V., Arabindoo, B., Palanichamy, M., & Murugesan, V. (2003) · Solar Energy Materials and Solar Cells · doi:10.1016/s0927-0248(02)00255-6 · Cited by 1,684 · cited 1×
“ZnO has been proposed as an alternative photocatalyst to TiO2 as it has the same band gap energy, but exhibits higher absorption efficiency across a large fraction of the solar spectrum as compared to TiO2 [227].”
BackgroundUltraviolet–visible absorption spectra of the colloidal metallic elements
Creighton, J. A., & Eadon, D. G. (1991) · J. Chem. Soc., Faraday Trans. · doi:10.1039/ft9918703881 · Cited by 1,625 · cited 2×
“given for NPs of nearly all metals at UV or Vis wavelengths compared to IR wavelengths [72].”
BackgroundPharmaceuticals as emerging contaminants and their removal from water. A review
Rivera-Utrilla, J., Sánchez-Polo, M., Ferro-García, M. Á., Prados-Joya, G., & Ocampo-Pérez, R. (2013) · Chemosphere · doi:10.1016/j.chemosphere.2013.07.059 · Cited by 1,486
Heterogeneous Photocatalysis: Recent Advances and Applications
Ibhadon, A., & Fitzpatrick, P. (2013) · Catalysts · doi:10.3390/catal3010189 · Cited by 1,409
Quantum Dots and Their Multimodal Applications: A Review
Bera, D., Qian, L., Tseng, T.-K., & Holloway, P. H. (2010) · Materials · doi:10.3390/ma3042260 · Cited by 1,365 · cited 3×
“Typical examples are the formation of quantum dots during epitaxial growth, or the production of NPs as colloidal dispersions by chemical approaches [6].”
BackgroundMethodPhotocatalytic degradation for environmental applications—A review
Bhatkhande, D. S., Pangarkar, V. G., & Beenackers, A. A. C. M. (2002) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.532 · Cited by 1,365 · cited 4×
“Since the 1980s, the overall, extensive effort has been conducted in the area of water treatment using TiO2, CeO2, ZnO, CdS, WO3, Fe2O3 NPs [242,245], carbon-based nanomaterials, zeolites and dendritic polymers [246] to detect and remove chemical and biological pollutants more efficiently, exploiting the high surface…”
BackgroundInfluentialUltrafast laser processing of materials: from science to industry
Malinauskas, M., Žukauskas, A., Hasegawa, S., Hayasaki, Y., Mizeikis, V., Buividas, R., & Juodkazis, S. (2016) · Light: Science & Applications · doi:10.1038/lsa.2016.133 · Cited by 1,364 · cited 1×
“There are many literature papers on laser interaction with hard, soft and smart materials, targeting future applications in the fields of energy production (nano-energy) and biomedicine [8], as well as recent progress in the understanding of the fundamental mechanisms involved in laser processing [9].”
BackgroundLaser Synthesis and Processing of Colloids: Fundamentals and Applications
Zhang, D., Gökce, B., & Barcikowski, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00468 · Cited by 1,344 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationKnight, M. W., King, N. S., Liu, L., Everitt, H. O., Nordlander, P., & Halas, N. J. (2014) · ACS Nano · doi:10.1021/nn405495q · Cited by 1,261 · cited 1×
“The most experimentally tested UV-SERS platforms are Al, Ga, In, Pb, Sn, Bi, Rh, Ru, Pt and Pd, owing to their availability and to the absence of interband transitions in the UV [192].”
BackgroundAblation of metals by ultrashort laser pulses
Nolte, S., Momma, C., Jacobs, H., Tünnermann, A., Chichkov, B. N., Wellegehausen, B., & Welling, H. (1997) · Journal of the Optical Society of America B · doi:10.1364/josab.14.002716 · Cited by 1,146 · cited 1×
“In addition, the ablation rate becomes independent from the optical penetration depths at these longer pulse durations due to the more thermal ablation mechanism [94].”
BackgroundNanoplasmonics: Past, present, and glimpse into future
Stockman, M. I. (2011) · Optics Express · doi:10.1364/oe.19.022029 · Cited by 1,109 · cited 2×
“Much more complex is the situation in all those cases where the NP has a shape far from spherical-like and proper simulations about the plasmonic response should be conducted to interpret the response [142,144,145].”
BackgroundSingle-bubble sonoluminescence
Brenner, M. P., Hilgenfeldt, S., & Lohse, D. (2002) · Reviews of Modern Physics · doi:10.1103/revmodphys.74.425 · Cited by 1,052
A review on the classification, characterisation, synthesis of nanoparticles and their application
Anu Mary Ealia, S., & Saravanakumar, M. P. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/263/3/032019 · Cited by 1,050 · cited 2×
“As the applied electric field became stronger, the growth of the {1011} plane would be elongated along the [1] direction, which results in the formation of spindle-like morphology.”
BackgroundLaser ablation synthesis in solution and size manipulation of noble metal nanoparticles
Amendola, V., & Meneghetti, M. (2009) · Physical Chemistry Chemical Physics · doi:10.1039/b900654k · Cited by 1,020 · cited 2×
“A full description of the LAL, at different experimental conditions, is beyond the scope of this paper and the interested reader can refer to the following review papers: [39,52,55], and references therein.”
BackgroundSelf-citationGomes Silva, C., Juárez, R., Marino, T., Molinari, R., & García, H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja1086358 · Cited by 1,003
Nanomaterials via Laser Ablation/Irradiation in Liquid: A Review
Zeng, H., Du, X., Singh, S. C., Kulinich, S. A., Yang, S., He, J., & Cai, W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102295 · Cited by 966 · cited 3×
“A full description of the LAL, at different experimental conditions, is beyond the scope of this paper and the interested reader can refer to the following review papers: [39,52,55], and references therein.”
Background(1974) · Journal of Experimental and Theoretical Physics · Cited by 905
Removal of Pharmaceuticals in Sewage Treatment Plants in Italy
Castiglioni, S., Bagnati, R., Fanelli, R., Pomati, F., Calamari, D., & Zuccato, E. (2006) · Environmental Science & Technology · doi:10.1021/es050991m · Cited by 841
MNPBEM—A Matlab toolbox for the simulation of plasmonic nanoparticles
Hohenester, U., & Trügler, A. (2012) · Computer Physics Communications · doi:10.1016/j.cpc.2011.09.009 · Cited by 798 · cited 1×
“However, in order to be able to tune the plasmon resonance of a metallic NP, playing with the size is not enough to explore a broad range [143,150].”
BackgroundPlasmonic photocatalysts: harvesting visible light with noble metal nanoparticles
Wang, P., Huang, B., Dai, Y., & Whangbo, M.-H. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40823f · Cited by 794 · cited 3×
“improvement of the photoefficiency is due to the presence of Au NPs [260,271,272], that, thanks to the SPR and high electron density, are able to enhance the electron transfer from the Au NPs to the catalyst [273,274].”
BackgroundWang, Z., Yang, C., Lin, T., Yin, H., Chen, P., Wan, D., Xu, F., Huang, F., Lin, J., Xie, X., et al. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201300486 · Cited by 719 · cited 1×
“Doping with atomic defects can be achieved by different routes, ranging from vacuum treatments, reducing thermal treatments [265,266] to hydrogen plasmas [267,268], yet one of the more convenient, flexible and environmentally friendly strategies is to use LAL of semiconductor oxide NPs dispersed in liquid (typically w…”
BackgroundPhotochemical Activity of Nitrogen-Doped Rutile TiO2(110) in Visible Light
Diwald, O., Thompson, T. L., Zubkov, T., Ed. G. Goralski, Walck, S. D., & Yates, J. T. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp031267y · Cited by 712 · cited 1×
“According to theoretical results [229,230], the extension into visible range should be also obtained by introducing anionic dopants such as nitrogen [231], sulfur, fluorine species which confer a greater stability to the catalyst with respect to the conventional transition-metal dopants, besides determining a signific…”
BackgroundPhotolysis of chloroform and other organic molecules in aqueous titanium dioxide suspensions
Kormann, C., Bahnemann, D. W., & Hoffmann, M. R. (1991) · Environmental Science & Technology · doi:10.1021/es00015a018 · Cited by 706
Calibration of the Raman spectrum to the oxygen stoichiometry of nanophase TiO2
Parker, J. C., & Siegel, R. W. (1990) · Applied Physics Letters · doi:10.1063/1.104274 · Cited by 684 · cited 1×
“The trend observed is analogous to that reported [283], in samples for which the calculated value of the O/Ti atomic ratio is reduced to 1.”
ResultFormation of Gold Nanoparticles by Laser Ablation in Aqueous Solution of Surfactant
Mafuné, Kohno, J.-Y., Takeda, Y., Kondow, T., & Sawabe, H. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0037091 · Cited by 630
Noack, J., & Vogel, A. (1999) · IEEE Journal of Quantum Electronics · doi:10.1109/3.777215 · Cited by 618 · cited 4×
“As described by Noack and Vogel [108], the laser-induced cascade of ionization must reach a specific density of free electrons to provoke the breakdown of the liquid in dependence on the pulse duration and wavelength.”
BackgroundInfluentialFrank, S. N., & Bard, A. J. (1977) · Journal of the American Chemical Society · doi:10.1021/ja00443a081 · Cited by 574
Tuning Size and Sensing Properties in Colloidal Gold Nanostars
Barbosa, S., Agrawal, A., Rodríguez-Lorenzo, L., Pastoriza-Santos, I., Alvarez-Puebla, R. A., Kornowski, A., Weller, H., & Liz-Marzán, L. M. (2010) · Langmuir · doi:10.1021/la102559e · Cited by 522 · cited 4×
“It is wor h to recall the protocol used for the TDM in the case of Erlotinib, a therapeutic d ug for cancer cells overexpressing EGFR [153].”
BackgroundMethodInfluentialNanomaterials-based advanced oxidation processes for wastewater treatment: A review
Bethi, B., Sonawane, S. H., Bhanvase, B. A., & Gumfekar, S. P. (2016) · Chemical Engineering and Processing - Process Intensification · doi:10.1016/j.cep.2016.08.016 · Cited by 517 · cited 2×
“dendritic polymers [246] to detect and remove chemical and biological pollutants more efficiently, exploiting the high surface area and the peculiar electronic and optical properties of materials with”
BackgroundEnhanced photocatalytic removal of phenol from aqueous solutions using ZnO modified with Ag
Vaiano, V., Matarangolo, M., Murcia, J. J., Rojas, H., Navío, J. A., & Hidalgo, M. C. (2018) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2017.11.075 · Cited by 512 · cited 1×
“Ultimately, photo-activated reactions as 2-propanol degradation, chemo-selective oxidation of alcohols, efficient phenol removal from aqueous solutions by Ag in photoactivated ZnO-Ag [281] are other reported examples of enhanced efficiency in modified catalysts.”
BackgroundThe role of twinning in shape evolution of anisotropic noble metal nanostructures
Elechiguerra, J. L., Reyes-Gasga, J., & Yacaman, M. J. (2006) · Journal of Materials Chemistry · doi:10.1039/b607128g · Cited by 491
Synthesis of Nanoparticles by Laser Ablation: A Review
Kim, M., Osone, S., Kim, T., Higashi, H., & Seto, T. (2017) · KONA Powder and Particle Journal · doi:10.14356/kona.2017009 · Cited by 480
Sub-picosecond UV laser ablation of metals
Preuss, S., Demchuk, A., & Stuke, M. (1995) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01538207 · Cited by 468 · cited 2×
“In addition, the type of the ablated material influences the onset of the saturation in the ablation rate [83,85,92] by different”
BackgroundDawson, A., & Kamat, P. V. (2001) · The Journal of Physical Chemistry B · doi:10.1021/jp0033263 · Cited by 463 · cited 1×
“Few researchers attempted wastewater treatment using nanocomposites made of carbon-based materials or metal/metal oxide NPs such as TiO2 [220], ZnO [221], Pd [222], Fe3O4 [223], cerium oxide and semiconductors–noble metals [224].”
BackgroundMetal Ablation with Short and Ultrashort Laser Pulses
Leitz, K.-H., Redlingshöfer, B., Reg, Y., Otto, A., & Schmidt, M. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.128 · Cited by 410
Colloidal silver nanoplates. State of the art and future challenges
Pastoriza-Santos, I., & Liz-Marzán, L. M. (2008) · Journal of Materials Chemistry · doi:10.1039/b716538b · Cited by 405 · cited 2×
“However, the use of LAL for the production of the seeds, coupled with light irradiation and H2O2 addition, has the great advantage of being an environment-friendly process that does not involve the use of strong reducing agents or harmful chemicals [156,161,162].”
BackgroundPlasmonics in the ultraviolet with the poor metals Al, Ga, In, Sn, Tl, Pb, and Bi
McMahon, J. M., Schatz, G. C., & Gray, S. K. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c3cp43856b · Cited by 371 · cited 4×
“The limited number of papers on UV-SERS is mainly because the application of deep-UV excitation very often leads to photo-degradation of the samples.”
BackgroundInfluentialShape‐Dependent Plasmon‐Resonant Gold Nanoparticles
Orendorff, C. J., Sau, T. K., & Murphy, C. J. (2006) · Small · doi:10.1002/smll.200500299 · Cited by 367 · cited 3×
“improvement of the photoefficiency is due to the presence of Au NPs [260,271,272], that, thanks to the SPR and high electron density, are able to enhance the electron transfer from the Au NPs to the catalyst [273,274].”
BackgroundSingle-Molecule Plasmon Sensing: Current Status and Future Prospects
Taylor, A. B., & Zijlstra, P. (2017) · ACS Sensors · doi:10.1021/acssensors.7b00382 · Cited by 366 · cited 2×
“medium can be exploited for optical sensing applications [163], even at a single molecule level [164,165], as it allows the detection of molecules dissolved in the colloidal phase or adsorbed on the surface, as long as they cause a variation of the refractive index of the medium [166,167].”
BackgroundAmendola, V., Amans, D., Ishikawa, Y., Koshizaki, N., Scirè, S., Compagnini, G., Reichenberger, S., & Barcikowski, S. (2020) · Chemistry – A European Journal · doi:10.1002/chem.202000686 · Cited by 354 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationXiao, J., Liu, P., Wang, C. X., & Yang, G. W. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.02.004 · Cited by 352 · cited 2×
“employed as unique liquids to synthesize nanocrystals and fabricate nanostructures [125].”
MethodPhotocatalytic reforming of biomass: A systematic study of hydrogen evolution from glucose solution
FU, X., LONG, J., WANG, X., LEUNG, D., DING, Z., WU, L., ZHANG, Z., LI, Z., & FU, X. (2008) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2008.07.068 · Cited by 342
Magnetically Recoverable Core–Shell Nanocomposites with Enhanced Photocatalytic Activity
Ye, M., Zhang, Q., Hu, Y., Ge, J., Lu, Z., He, L., Chen, Z., & Yin, Y. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200903516 · Cited by 335 · cited 1×
“Few researchers attempted wastewater treatment using nanocomposites made of carbon-based materials or metal/metal oxide NPs such as TiO2 [220], ZnO [221], Pd [222], Fe3O4 [223], cerium oxide and semiconductors–noble metals [224].”
BackgroundEnhanced TiO2 photocatalysis by Cu in hydrogen production from aqueous methanol solution
WU, N. (2004) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2004.02.013 · Cited by 334
LVIII. On the scattering of light by small particles
Strutt, J. W. (1871) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786447108640507 · Cited by 317
Synthesis, characterization and photocatalytic activity of different metal-doped titania systems
Colmenares, J. C., Aramendía, M. A., Marinas, A., Marinas, J. M., & Urbano, F. J. (2006) · Applied Catalysis A: General · doi:10.1016/j.apcata.2006.03.046 · Cited by 308
Henrich, V. E., & Kurtz, R. L. (1981) · Physical Review B · doi:10.1103/physrevb.23.6280 · Cited by 302 · cited 1×
“Doping with atomic defects can be achieved by different routes, ranging from vacuum treatments, reducing thermal treatments [265,266] to hydrogen plasmas [267,268], yet one of the more convenient, flexible and environmentally friendly strategies is to use LAL of semiconductor oxide NPs dispersed in liquid (typically w…”
BackgroundFemtosecond laser reshaping yields gold nanorods with ultranarrow surface plasmon resonances
González-Rubio, G., Díaz-Núñez, P., Rivera, A., Prada, A., Tardajos, G., González-Izquierdo, J., Bañares, L., Llombart, P., Macdowell, L. G., Alcolea Palafox, M., et al. (2017) · Science · doi:10.1126/science.aan8478 · Cited by 300 · cited 1×
“To explore the wide range of opportunities that LAL brings, the unique properties of femtosecond lasers is a further hot research topic, not only to increase NP production, but also to generate structural modifications and new material phases [46,47].”
BackgroundSafajou, H., Khojasteh, H., Salavati-Niasari, M., & Mortazavi-Derazkola, S. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.03.078 · Cited by 298 · cited 1×
“Few researchers attempted wastewater treatment using nanocomposites made of carbon-based materials or metal/metal oxide NPs such as TiO2 [220], ZnO [221], Pd [222], Fe3O4 [223], cerium oxide and semiconductors–noble metals [224].”
BackgroundMitsudome, T., Mikami, Y., Matoba, M., Mizugaki, T., Jitsukawa, K., & Kaneda, K. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201106244 · Cited by 298 · cited 1×
“Few researchers attempted wastewater treatment using nanocomposites made of carbon-based materials or metal/metal oxide NPs such as TiO2 [220], ZnO [221], Pd [222], Fe3O4 [223], cerium oxide and semiconductors–noble metals [224].”
BackgroundHydroxyl radical mediated degradation of azo dyes: evidence for benzene generation
Spadaro, J. T., Isabelle, L., & Renganathan, V. (1994) · Environmental Science & Technology · doi:10.1021/es00056a031 · Cited by 296
Photocatalytic degradation of methyl orange as a model compound
Al-Qaradawi, S., & Salman, S. R. (2002) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(02)00086-2 · Cited by 290 · cited 2×
“[254], Copyright (2002), with permission from Elsevier.”
BackgroundStreubel, R., Barcikowski, S., & Gökce, B. (2016) · Optics Letters · doi:10.1364/ol.41.001486 · Cited by 283 · cited 3×
“(b) Plasma temperature 2D map calculated as reported in [43] (Al target in MilliQ water, Elaser”
BackgroundMethodInfluentialSelf-citationVogel, A., Nahen, K., Theisen, D., & Noack, J. (1996) · IEEE Journal of Selected Topics in Quantum Electronics · doi:10.1109/2944.577307 · Cited by 275 · cited 2×
“For picosecond pulses, the intensity threshold for filamentation is generally much higher than for the optical breakdown of water and becomes comparable only at low focusing angles [107].”
BackgroundKinetically-controlled laser-synthesis of colloidal high-entropy alloy nanoparticles
Waag, F., Li, Y., Ziefuß, A. R., Bertin, E., Kamp, M., Duppel, V., Marzun, G., Kienle, L., Barcikowski, S., & Gökce, B. (2019) · RSC Advances · doi:10.1039/c9ra03254a · Cited by 273 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationBiosensing with plasmonic nanosensors
ANKER, J. N., HALL, W. P., LYANDRES, O., SHAH, N. C., ZHAO, J., & VAN DUYNE, R. P. (2009) · Nanoscience and Technology · doi:10.1142/9789814287005_0032 · Cited by 272
Preparation and photo-catalytic activity of Fe-TiO2 thin films prepared by sol-gel dip coating
Sonawane, R. S., Kale, B. B., & Dongare, M. K. (2004) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2003.12.007 · Cited by 269 · cited 1×
“75 eV), strongly limit a more economical application in the pollutant abatement [252,253] based on the solar irradiation (the”
BackgroundReshaping, Fragmentation, and Assembly of Gold Nanoparticles Assisted by Pulse Lasers
González-Rubio, G., Guerrero-Martínez, A., & Liz-Marzán, L. M. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00041 · Cited by 260 · cited 1×
“Despite some unsolved problems of a physical, chemical and technical nature, several strategies have been proposed to overcome the above issues, including the selection of the appropriate liquid or stabilizing agent, the optimization of the focusing conditions and liquid levels, as well as the adoption of scanning and…”
BackgroundShih, C.-Y., Streubel, R., Heberle, J., Letzel, A., Shugaev, M. V., Wu, C., Schmidt, M., Gökce, B., Barcikowski, S., & Zhigilei, L. V. (2018) · Nanoscale · doi:10.1039/c7nr08614h · Cited by 253 · cited 2×
“Ideally, with a laser pulse with a shorter duration than a few tens of fs, the effect of the interaction of the laser pulse with the ejected material can be neglected and the evolution of the ablated material can be investigated with atomistic models [56].”
BackgroundSelf-citationAl–Pd Nanodisk Heterodimers as Antenna–Reactor Photocatalysts
Zhang, C., Zhao, H., Zhou, L., Schlather, A. E., Dong, L., McClain, M. J., Swearer, D. F., Nordlander, P., & Halas, N. J. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03582 · Cited by 243 · cited 1×
“Nevertheless, UV nanoplasmonics may offer new opportunities in surface-enhanced Raman spectroscopy (SERS) [186], photocatalysis [187], biology [188] and public safety and security for the detection of organic molecules and hazardous organic compounds [189].”
BackgroundScalable production of graphene sheets by mechanical delamination
Knieke, C., Berger, A., Voigt, M., Taylor, R. N. K., Röhrl, J., & Peukert, W. (2010) · Carbon · doi:10.1016/j.carbon.2010.05.003 · Cited by 243 · cited 2×
“medium can be exploited for optical sensing applications [163], even at a single molecule level [164,165], as it allows the detection of molecules dissolved in the colloidal phase or adsorbed on the surface, as long as they cause a variation of the refractive index of the medium [166,167].”
BackgroundGeneration of nanoparticle colloids by picosecond and femtosecond laser ablations in liquid flow
Barcikowski, S., Menéndez-Manjón, A., Chichkov, B., Brikas, M., & Račiukaitis, G. (2007) · Applied Physics Letters · doi:10.1063/1.2773937 · Cited by 225 · cited 1×
“Liquid Environment: The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
BackgroundAblation threshold dependence on pulse duration for copper
Hashida, M., Semerok, A. F., Gobert, O., Petite, G., Izawa, Y., & Wagner, J. F. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00463-4 · Cited by 220 · cited 1×
“If the pulse duration is further increased from the picosecond to the few nanosecond time regime, the threshold fluence for ablation becomes constant [104].”
BackgroundSemerok, A., Chaléard, C., Detalle, V, Lacour, J.-L., Mauchien, P., Meynadier, P., Nouvellon, C., Sallé, B., Palianov, P., Perdrix, M., et al. (1999) · Applied Surface Science · doi:10.1016/s0169-4332(98)00411-5 · Cited by 218 · cited 2×
“[73] found higher ablation rates by using shorter wavelengths in the picosecond and nanosecond-pulsed laser ablation in air for several metals.”
BackgroundRen, B., Lin, X.-F., Yang, Z.-L., Liu, G.-K., Aroca, R. F., Mao, B.-W., & Tian, Z.-Q. (2003) · Journal of the American Chemical Society · doi:10.1021/ja035541d · Cited by 217
Plasmonics simulations with the MNPBEM toolbox: Consideration of substrates and layer structures
Waxenegger, J., Trügler, A., & Hohenester, U. (2015) · Computer Physics Communications · doi:10.1016/j.cpc.2015.03.023 · Cited by 205 · cited 1×
“We developed a methodology for detecting cancer cells based on sub-nanomolar concentration of nanocolloids functionalized with monoclonal antibodies [147,148] or with engineered targeting peptides [172,180–183].”
MethodPyatenko, A., Wang, H., Koshizaki, N., & Tsuji, T. (2013) · Laser & Photonics Reviews · doi:10.1002/lpor.201300013 · Cited by 202
Pulsed Laser Ablation of Solids: Basics, Theory and Applications
Stafe, M., Marcu, A., & Puşcaş, N. N. (2013) · Springer series in surface sciences · doi:10.1007/978-3-642-40978-3 · Cited by 202
Shiraishi, Y., Sakamoto, H., Sugano, Y., Ichikawa, S., & Hirai, T. (2013) · ACS Nano · doi:10.1021/nn403954p · Cited by 201 · cited 1×
“The improved photocatalytic performance in the entire frequency range of the solar spectrum attained by the so-called blue Titania, namely defective TiO2 (bearing oxygen vacancies and under-cordinated Ti+4) was demonstrated [261,262] not only towards pollutants but also in the water splitting processes [257].”
BackgroundSeed-mediated growth of noble metal nanocrystals: Crystal growth and shape control
Niu, W., Zhang, L., & Xu, G. (2013) · Nanoscale · doi:10.1039/c3nr00219e · Cited by 201 · cited 2×
“medium can be exploited for optical sensing applications [163], even at a single molecule level [164,165], as it allows the detection of molecules dissolved in the colloidal phase or adsorbed on the surface, as long as they cause a variation of the refractive index of the medium [166,167].”
BackgroundRefractive index of solutions at high concentrations
Yunus, W. M. B. M., & Rahman, A. B. A. (1988) · Applied Optics · doi:10.1364/ao.27.003341 · Cited by 197 · cited 2×
“S can be easily measured by performing a relatively simple experiment in which a small aliquot of colloid solution is mixed with a sucrose solution at a set concentration, in a 20–70% range, where a direct relationship between sucrose concentration and refractive index exists [168].”
BackgroundMethodKanitz, A., Kalus, M.-R., Gurevich, E. L., Ostendorf, A., Barcikowski, S., & Amans, D. (2019) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ab3dbe · Cited by 195 · cited 2×
“A full description of the LAL, at different experimental conditions, is beyond the scope of this paper and the interested reader can refer to the following review papers: [39,52,55], and references therein.”
BackgroundDegradation of 4-nitrophenol (4-NP) using Fe–TiO2 as a heterogeneous photo-Fenton catalyst
Zhao, B., Mele, G., Pio, I., Li, J., Palmisano, L., & Vasapollo, G. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.11.066 · Cited by 194
Surface Structuring with Ultra-short Laser Pulses: Basics, Limitations and Needs for High Throughput
Neuenschwander, B., Jaeggi, B., Schmid, M., & Hennig, G. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.017 · Cited by 194 · cited 1×
“[96] demonstrated theoretically and experimentally that a maximum energy efficiency of ultrashort-pulsed laser ablation is reached at an optimum fluence, which is the material-specific threshold fluence of laser ablation multiplied by e2.”
BackgroundProduction of Au–Ag alloy nanoparticles by laser ablation of bulk alloys
Lee, I., Han, S. W., & Kim, K. (2001) · Chemical Communications · doi:10.1039/b105437f · Cited by 192 · cited 1×
“One way to overcome the issue is by alloying [145,146].”
BackgroundMagnesium as Novel Material for Active Plasmonics in the Visible Wavelength Range
Sterl, F., Strohfeldt, N., Walter, R., Griessen, R., Tittl, A., & Giessen, H. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03029 · Cited by 188
Femtosecond laser pulse filamentation versus optical breakdown in H 2 O
Liu, W., Kosareva, O., Golubtsov, I. S., Iwasaki, A., Becker, A., Kandidov, V. P., & Chin, S. L. (2003) · Applied Physics B: Lasers and Optics · doi:10.1007/s00340-002-1087-1 · Cited by 188
De Giacomo, A., Dell'Aglio, M., Santagata, A., Gaudiuso, R., De Pascale, O., Wagener, P., Messina, G. C., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42649h · Cited by 181 · cited 1×
“[122] in a comparative study on bulk and wire ablation.”
BackgroundSelf-citationAmendola, V., Polizzi, S., & Meneghetti, M. (2007) · Langmuir · doi:10.1021/la0637061 · Cited by 180
Self-citationOn Nanoparticle Formation by Laser Ablation in Liquids
Itina, T. E. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1090944 · Cited by 179 · cited 2×
“Moreover, we aim to display a combined picture of the several processes implied by LAL [50,51], remarking, with respect to previous reviews [23,39,52–54], the high complexity and multiple time-”
ResultPerspective of Surfactant‐Free Colloidal Nanoparticles in Heterogeneous Catalysis
Reichenberger, S., Marzun, G., Muhler, M., & Barcikowski, S. (2019) · ChemCatChem · doi:10.1002/cctc.201900666 · Cited by 178 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundLaser ablation at solid–liquid interfaces: An approach from optical emission spectra
Sakka, T., Iwanaga, S., Ogata, Y. H., Matsunawa, A., & Takemoto, T. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481465 · Cited by 178
Kandavelu, V, Kastien, H., & Thampi, K. R. (2004) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2003.09.022 · Cited by 174 · cited 1×
“The effect of TiO2 and ZnO on the color fading under light irradiation was deeply discussed in the years highlighting the superior photocatalytic activity sometimes of ZnO and other times of the TiO2 [234,235].”
BackgroundKnight, M. W., Coenen, T., Yang, Y., Brenny, B. J. M., Losurdo, M., Brown, A. S., Everitt, H. O., & Polman, A. (2015) · ACS Nano · doi:10.1021/nn5072254 · Cited by 174 · cited 1×
“Ga is interesting for its self-terminating oxide monolayer, but it has an intrinsic low electrical conductivity besides the melting point near room temperature that hinders its manipulation [197,198].”
BackgroundDynamical study of bubble expansion following laser ablation in liquids
Lam, J., Lombard, J., Dujardin, C., Ledoux, G., Merabia, S., & Amans, D. (2016) · Applied Physics Letters · doi:10.1063/1.4942389 · Cited by 174 · cited 2×
“Moreover, we aim to display a combined picture of the several processes implied by LAL [50,51], remarking, with respect to previous reviews [23,39,52–54], the high complexity and multiple time-”
ResultHorikoshi, S., & Serpone, N. (2020) · Catalysis Today · doi:10.1016/j.cattod.2018.10.020 · Cited by 173 · cited 3×
“The main redox reactions are summarized by Horikoshi and Malato [250,251] as follows: e− + O2 → O−·2 O−·2 (ads) + H + → HO·2(ads) h+ + H2O→ ·OH(ads) + H+ h+ + O−·2 (ads)→ 2O·(ads) h+ + P→ P·+ (14) Then, oxygen and pollutant radicals further react to give oxidation of organic products.”
BackgroundGonzález-Rubio, G., Kumar, V., Llombart, P., Díaz-Núñez, P., Bladt, E., Altantzis, T., Bals, S., Peña-Rodríguez, O., Noya, E. G., MacDowell, L. G., et al. (2019) · ACS Nano · doi:10.1021/acsnano.8b09658 · Cited by 172 · cited 2×
“nanorods [151,152], gold nanostars [153] and silver nanoplates [154,155].”
BackgroundVersatile Solution Phase Triangular Silver Nanoplates for Highly Sensitive Plasmon Resonance Sensing
Charles, D. E., Aherne, D., Gara, M., Ledwith, D. M., Gun’ko, Y. K., Kelly, J. M., Blau, W. J., & Brennan-Fournet, M. E. (2010) · ACS Nano · doi:10.1021/nn9016235 · Cited by 164 · cited 2×
“medium can be exploited for optical sensing applications [163], even at a single molecule level [164,165], as it allows the detection of molecules dissolved in the colloidal phase or adsorbed on the surface, as long as they cause a variation of the refractive index of the medium [166,167].”
BackgroundEffects of dopant states on photoactivity in carbon-doped TiO2
Wang, H., & Lewis, J. P. (2005) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/17/21/l01 · Cited by 161
Xie, B., Wang, Y., Lai, W., Lin, W. J., Lin, Z., Zhang, Z., Zou, P., Xu, Y., Zhou, S., Yang, C., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.045 · Cited by 160 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundThe mechanism of photosensitisation by solids
Goodeve, C. F., & Kitchener, J. A. (1938) · Transactions of the Faraday Society · doi:10.1039/tf9383400902 · Cited by 159 · cited 2×
“In particular, in 1931, Rao et al. observed the decomposition under solar irradiation of ammonia salts-based fertilizers due to the presence in the soil of TiO2 and ZnO [236–238], while the mechanism of photogenerated electron/hole (e−/h+) generation and recombination at different irradiation frequency was first discu…”
BackgroundThermally stable coexistence of liquid and solid phases in gallium nanoparticles
Losurdo, M., Suvorova, A., Rubanov, S., Hingerl, K., & Brown, A. S. (2016) · Nature Materials · doi:10.1038/nmat4705 · Cited by 158 · cited 1×
“Ga is interesting for its self-terminating oxide monolayer, but it has an intrinsic low electrical conductivity besides the melting point near room temperature that hinders its manipulation [197,198].”
BackgroundZettsu, N., McLellan, J. M., Wiley, B., Yin, Y., Li, Z., & Xia, Y. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503174 · Cited by 153 · cited 1×
“[203] published high-quality UV-SERS spectra (under 325 nm excitation) of 4-mercaptopyridine attached to sub-10 nm tripod-shaped stars of Rh;”
BackgroundUltrafast laser based “green” synthesis of non-toxic nanoparticles in aqueous solutions
Besner, S., Kabashin, A. V., Winnik, F. M., & Meunier, M. (2008) · Applied Physics A · doi:10.1007/s00339-008-4773-y · Cited by 150
Pilot-scale synthesis of metal nanoparticles by high-speed pulsed laser ablation in liquids
Streubel, R., Bendt, G., & Gökce, B. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/20/205602 · Cited by 150 · cited 2×
“[48], low productivity shortcomings in LAL have been almost entirely remedied, reaching NP production rates of several grams per hour.”
BackgroundSelf-citationClarizia, L., Spasiano, D., Di Somma, I., Marotta, R., Andreozzi, R., & Dionysiou, D. D. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.08.037 · Cited by 149
Shock Wave Emission by Laser Generated Bubbles
Lauterborn, W., & Vogel, A. (2013) · Bubble Dynamics and Shock Waves · doi:10.1007/978-3-642-34297-4_3 · Cited by 147 · cited 1×
“Recently it has been shown, that the charging effect of the plasma is involved also in the subsequent steps of LAL process [62,63].”
BackgroundChen, X., Zhao, D., Liu, K., Wang, C., Liu, L., Li, B., Zhang, Z., & Shen, D. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04568 · Cited by 147 · cited 1×
“[269] demonstrated that the formation of Ti3+ species and a surface structural disorder can be induced in titania NPs by LAL: the resulting modified catalysts exhibit good photocatalytic performance under visible light towards the abatement of dyes.”
BackgroundYang, Y., Callahan, J. M., Kim, T.-H., Brown, A. S., & Everitt, H. O. (2013) · Nano Letters · doi:10.1021/nl401145j · Cited by 146 · cited 1×
“Nevertheless, UV nanoplasmonics may offer new opportunities in surface-enhanced Raman spectroscopy (SERS) [186], photocatalysis [187], biology [188] and public safety and security for the detection of organic molecules and hazardous organic compounds [189].”
BackgroundPotara, M., Gabudean, A.-M., & Astilean, S. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03329d · Cited by 143 · cited 2×
“are converted into nanoplates, the plasmon sensitivity shows a roughly threefold increase [161,169], as shown in Figure 16a.”
BackgroundDeep-UV surface-enhanced Raman scattering
Dörfer, T., Schmitt, M., & Popp, J. (2007) · Journal of Raman Spectroscopy · doi:10.1002/jrs.1831 · Cited by 141 · cited 2×
“108-fold enhancement of the Raman cross-section, allowing to detect ultralow molecular concentrations [190].”
BackgroundFluorine-doping in titanium dioxide by ion implantation technique
Yamaki, T., Umebayashi, T., Sumita, T., Yamamoto, S., Maekawa, M., Kawasuso, A., & Itoh, H. (2003) · Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms · doi:10.1016/s0168-583x(03)00735-3 · Cited by 139 · cited 1×
“According to theoretical results [229,230], the extension into visible range should be also obtained by introducing anionic dopants such as nitrogen [231], sulfur, fluorine species which confer a greater stability to the catalyst with respect to the conventional transition-metal dopants, besides determining a signific…”
BackgroundKuzmin, P. G., Shafeev, G. A., Bukin, V. V., Garnov, S. V., Farcau, C., Carles, R., Warot-Fontrose, B., Guieu, V., & Viau, G. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp102174y · Cited by 139 · cited 2×
“75 eV), strongly limit a r application in the pollutant abatem nt [252, 3] based on the solar irradiation (the fraction of ph ton energy in the UV is <5% in solar spectrum).”
BackgroundRhodium Nanoparticles for Ultraviolet Plasmonics
Watson, A. M., Zhang, X., Alcaraz de la Osa, R., Sanz, J. M., González, F., Moreno, F., Finkelstein, G., Liu, J., & Everitt, H. O. (2015) · Nano Letters · doi:10.1021/nl5040623 · Cited by 138 · cited 1×
“[204] reported a comparative study employing Rh tripod geometry by means of SERS, surface enhanced fluorescence (SEF) and photo-induced degradation of p-aminothiophenol (PATP) under UV and visible excitation; • Ren et al.”
ResultPhotocatalytic activity of TiO2, ZnO and Nb2O5 applied to degradation of textile wastewater
de Souza, R. P., Freitas, T. K. F. S., Domingues, F. S., Pezoti, O., Ambrósio, E., Ferrari, A. M., & Garcia, J. C. (2016) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/j.jphotochem.2016.06.013 · Cited by 138
Hanon, M. M., Akman, E., Genc Oztoprak, B., Gunes, M., Taha, Z. A., Hajim, K. I., Kacar, E., Gundogdu, O., & Demir, A. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2011.11.010 · Cited by 134 · cited 1×
“Heat losses get more dominant and the ablation rate is consequently reduced [105].”
BackgroundPulsed Laser Ablation of Zinc in Tetrahydrofuran: Bypassing the Cavitation Bubble
Wagener, P., Schwenke, A., Chichkov, B. N., & Barcikowski, S. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp911243a · Cited by 133 · cited 5×
“[91] also observed an optimal interpulse distance in the picosecond-pulsed, Vis laser ablation of zinc in tetrahydrofuran.”
BackgroundInfluentialInfluence of the pulse duration in the ps-regime on the ablation efficiency of metals
Jaeggi, B., Neuenschwander, B., Schmid, M., Muralt, M., Zuercher, J., & Hunziker, U. (2011) · Physics Procedia · doi:10.1016/j.phpro.2011.03.118 · Cited by 133
Zang, X., Jian, C., Zhu, T., Zheng, F., Wang, W., Wei, M., Li, B., Diaz, M. F., Ashby, P. D., Lu, Z., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-10999-z · Cited by 132 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundByskov-Nielsen, J., Savolainen, J.-M., Christensen, M. S., & Balling, P. (2011) · Applied Physics A · doi:10.1007/s00339-011-6363-7 · Cited by 128 · cited 2×
“of dielectrics [98] or of the low-fluence regime in the picosecond-pulsed laser ablation of metals [99].”
BackgroundPant, H. R., Pant, B., Kim, H. J., et al. (2012) · Ceramics International · doi:10.1016/j.ceramint.2012.12.003 · Cited by 127
Study of the interaction of light with rough metal surfaces. I. Experiment
Beaglehole, D., & Hunderi, O. (1970) · Physical Review B · doi:10.1103/physrevb.2.309 · Cited by 125 · cited 1×
“However, the optical properties of an irradiated surface significantly depend on its temperature [75], roughness [76,77] and oxidation state/degree [78].”
BackgroundRhodium Nanoparticles from Cluster Seeds: Control of Size and Shape by Precursor Addition Rate
Humphrey, S. M., Grass, M. E., Habas, S. E., Niesz, K., Somorjai, G. A., & Tilley, T. D. (2007) · Nano Letters · doi:10.1021/nl070035y · Cited by 125
Fornasaro, S., Alsamad, F., Baia, M., Batista de Carvalho, L. A. E., Beleites, C., Byrne, H. J., Chiadò, A., Chis, M., Chisanga, M., Daniel, A., et al. (2020) · Analytical Chemistry · doi:10.1021/acs.analchem.9b05658 · Cited by 124 · cited 4×
“appropriate reproducibility and trueness [179].”
BackgroundInfluentialSelf-citationVijayan, B., Dimitrijevic, N. M., Rajh, T., & Gray, K. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp104345h · Cited by 124 · cited 1×
“The enhanced performance was attributed to the charge injection/recombination dynamics [263,264].”
BackgroundPhotoelectrocatalytic degradation of 4-chlorophenol and oxalic acid on titanium dioxide electrodes
Waldner, G., Pourmodjib, M., Bauer, R., & Neumann-Spallart, M. (2003) · Chemosphere · doi:10.1016/s0045-6535(02)00612-4 · Cited by 123 · cited 2×
“75 eV), strongly limit a more economical application in the pollutant abatement [252,253] based on the solar irradiation (the”
BackgroundBärsch, N., Jakobi, J., Weiler, S., & Barcikowski, S. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/44/445603 · Cited by 122 · cited 6×
“In addition, the type of the ablated material influences the onset of the saturation in the ablation rate [83,85,92] by different laser fluence thresholds and penetration depths.”
BackgroundInfluentialGas-phase ethanol photocatalytic degradation study with TiO2 doped with Fe, Pd and Cu
Araña, J., Doña-Rodrı́guez, J. M., González-Dı́az, O., Tello Rendón, E., Herrera Melián, J. A., Colón, G., Navı́o, J. A., & Pérez Peña, J. (2004) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2004.01.020 · Cited by 120
Baladi, A., & Sarraf Mamoory, R. (2010) · Applied Surface Science · doi:10.1016/j.apsusc.2010.05.103 · Cited by 119 · cited 2×
“Baladi and Mamoory [121] investigated the ablation rate in the nanosecond-pulsed, IR laser ablation of aluminum in ethanol, acetone and EG (ethylene glycol) at comparable laser fluences.”
BackgroundBorodko, Y., Lee, H. S., Joo, S. H., Zhang, Y., & Somorjai, G. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp909008z · Cited by 113 · cited 1×
“The extinction spectra of the two colloids show the contribution associated to the SPR of the Rh NPs below 400 nm but, for the samples prepared in ethanol, an additional absorption feature is observed around 340 nm, which may be ascribed to Rh-C bonds [215].”
BackgroundExperimental investigation of ultrashort pulse laser-induced breakdown thresholds in aqueous media
Hammer, D. X., Thomas, R. J., Noojin, G. D., Rockwell, B. A., Kennedy, P. K., & Roach, W. P. (1996) · IEEE Journal of Quantum Electronics · doi:10.1109/3.488842 · Cited by 112 · cited 1×
“In addition, the presence of soluble species also significantly reduces the intensity threshold of a liquid for its breakdown [113,114].”
BackgroundJiang, L., & Tsai, H.-L. (2008) · Journal of Applied Physics · doi:10.1063/1.3006129 · Cited by 110
Kalus, M.-R., Bärsch, N., Streubel, R., Gökce, E., Barcikowski, S., & Gökce, B. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp07011f · Cited by 109 · cited 2×
“Liquid Environment: The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
BackgroundSelf-citationShape-controlled syntheses of rhodium nanocrystals for the enhancement of their catalytic properties
Xie, S., Liu, X. Y., & Xia, Y. (2015) · Nano Research · doi:10.1007/s12274-014-0674-x · Cited by 104 · cited 1×
“Among the transition metals, Rh has been recently discovered as a novel, nonoxidizing plasmonic contrast agent, exhibiting UV plasmonic behavior in the region between 3 eV and 7 eV, with the advantages of its oxide-free nature [200].”
BackgroundInfluences on Nanoparticle Production during Pulsed Laser Ablation
Hahn, A. (2008) · Journal of Laser Micro/Nanoengineering · doi:10.2961/jlmn.2008.02.0003 · Cited by 104 · cited 4×
“In addition, the type of the ablated material influences the onset of the saturation in the ablation rate [83,85,92] by different”
BackgroundInfluentialCasavola, A. R., Giacomo, A. D., Dell’Aglio, M., Taccogna, F., Colonna, G., Pascale, O. D., & Longo, S. (2005) · Spectrochimica Acta Part B Atomic Spectroscopy · doi:10.1016/j.sab.2005.05.034 · Cited by 103
Self-citationTian, N., Zhou, Z.-Y., Sun, S.-G., Cui, L., Ren, B., & Tian, Z.-Q. (2006) · Chemical Communications · doi:10.1039/b609164d · Cited by 102 · cited 1×
“To date, the Rh nanostructures investigated were grown by electrochemical roughening of Rh surfaces [207] or by chemical methods using different Rh precursors [208].”
MethodParnklang, T., Lertvachirapaiboon, C., Pienpinijtham, P., Wongravee, K., Thammacharoen, C., & Ekgasit, S. (2013) · RSC Advances · doi:10.1039/c3ra41486h · Cited by 100
Scaramuzza, S., Zerbetto, M., & Amendola, V. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b00161 · Cited by 100 · cited 2×
“[123] investigated the impact of the dimensional reduction of the ablation target on the productivity.”
BackgroundIntartaglia, R., Bagga, K., & Brandi, F. (2014) · Optics Express · doi:10.1364/oe.22.003117 · Cited by 99 · cited 2×
“is strongly indicated by the observed smaller NP diameters at shorter applied wavelengths [54,69,70],”
BackgroundDoñate-Buendía, C., Frömel, F., Wilms, M. B., Streubel, R., Tenkamp, J., Hupfeld, T., Nachev, M., Gökce, E., Weisheit, A., Barcikowski, S., et al. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.044 · Cited by 99 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationMenéndez-Manjón, A., Wagener, P., & Barcikowski, S. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp109370q · Cited by 97 · cited 7×
“[44] did not even observe a decrease in productivity at longer interpulse distances at”
BackgroundInfluentialShielding properties of laser-induced breakdown in water for pulse durations from 5 ns to 125 fs
Hammer, D. X., Jansen, E. D., Frenz, M., Noojin, G. D., Thomas, R. J., Noack, J., Vogel, A., Rockwell, B. A., & Welch, A. J. (1997) · Applied Optics · doi:10.1364/ao.36.005630 · Cited by 97 · cited 1×
“Due to higher electron densities, plasmas induced by nanosecond laser pulses more effectively shield later irradiation than plasmas induced by picosecond pulses or long femtosecond pulses [109].”
BackgroundLi, B., Zhao, Z., Zhou, Q., Meng, B., Meng, X., & Qiu, J. (2014) · Chemistry – A European Journal · doi:10.1002/chem.201402664 · Cited by 95
Optical Properties of Metallic Nanoparticles
Trügler, A. (2016) · Springer Series in Materials Science · doi:10.1007/978-3-319-25074-8 · Cited by 91
Tsuji, T., Yahata, T., Yasutomo, M., Igawa, K., Tsuji, M., Ishikawa, Y., & Koshizaki, N. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44159d · Cited by 90
Indium for Deep-Ultraviolet Surface-Enhanced Resonance Raman Scattering
Kumamoto, Y., Taguchi, A., Honda, M., Watanabe, K., Saito, Y., & Kawata, S. (2014) · ACS Photonics · doi:10.1021/ph500076k · Cited by 90 · cited 1×
“Nevertheless, UV nanoplasmonics may offer new opportunities in surface-enhanced Raman spectroscopy (SERS) [186], photocatalysis [187], biology [188] and public safety and security for the detection of organic molecules and hazardous organic compounds [189].”
BackgroundSpectral profile of atomic emission lines and effects of pulse duration on laser ablation in liquid
Sakka, T., Masai, S., Fukami, K., & Ogata, Y. H. (2009) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2009.07.018 · Cited by 88 · cited 1×
“[100] also observed a decreasing ablation rate at an increasing pulse duration during the nanosecond-pulsed laser ablation of copper in water, although this effect did not occur during laser ablation in air.”
BackgroundLiang, Y., Liu, P., Li, H. B., & Yang, G. W. (2012) · Crystal Growth & Design · doi:10.1021/cg3006629 · Cited by 86 · cited 6×
“Various field-assisted LAL techniques have been developed, such as temperature field-assisted LAL [126], electric field-assisted laser ablation in liquid (EFLAL) [127], Magnetic Field-assisted Laser Ablation in Liquid (MFLAL) [128] and electrochemistry-assisted laser ablation in liquid (ECLAL) [129].”
MethodInfluentialLiu, P., Liang, Y., Lin, X., Wang, C., & Yang, G. (2011) · ACS Nano · doi:10.1021/nn2007282 · Cited by 84 · cited 1×
“[131] first prepared POMs by a one-step route using molybdenum as a solid target, copper as electrodes, and deionized water as the solvent.”
MethodLaser synthesis of Au/Ag colloidal nano-alloys: Optical properties, structure and composition
Compagnini, G., Messina, E., Puglisi, O., & Nicolosi, V. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.07.177 · Cited by 84 · cited 3×
“We developed a methodology for detecting cancer cells based on sub-nanomolar concentration of nanocolloids functionalized with monoclonal antibodies [147,148] or with engineered targeting peptides [172,180–183].”
BackgroundMethodSelf-citationFazio, E., Santoro, M., Lentini, G., Franco, D., Guglielmino, S. P. P., & Neri, F. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2015.11.034 · Cited by 83
Self-citationSchwenke, A., Wagener, P., Nolte, S., & Barcikowski, S. (2011) · Applied Physics A · doi:10.1007/s00339-011-6398-9 · Cited by 83 · cited 5×
“Laser-matter interaction: The basic mechanisms inducing the laser ablation in liquid, as well as their dependence on laser pulse properties, do not differ notably, with respect of laser ablation in gaseous environment [54].”
BackgroundMethodInfluentialHigh yield production of reduced TiO2 with enhanced photocatalytic activity
Tian, J., Hu, X., Yang, H., Zhou, Y., Cui, H., & Liu, H. (2015) · Applied Surface Science · doi:10.1016/j.apsusc.2015.11.056 · Cited by 82 · cited 1×
“The improved photocatalytic performance in the entire frequency range of the solar spectrum attained by the so-called blue Titania, namely defective TiO2 (bearing oxygen vacancies and under-cordinated Ti+4) was demonstrated [261,262] not only towards pollutants but also in the water splitting processes [257].”
BackgroundPark, H., Reddy, D. A., Kim, Y., Lee, S., Ma, R., & Kim, T. K. (2017) · Chemistry – A European Journal · doi:10.1002/chem.201702304 · Cited by 81 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundCristoforetti, G., Pitzalis, E., Spiniello, R., Ishak, R., Giammanco, F., Muniz-Miranda, M., & Caporali, S. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2011.11.084 · Cited by 77 · cited 1×
“[87] observed comparable productivities in the nanosecond-pulsed, IR laser ablation of palladium in ethanol and 2-propanol, but a productivity reduction in acetone (by 15%), water (by 20%) and toluene and n-hexane (by 85%).”
BackgroundDependence of gold nanoparticle production on pulse duration by laser ablation in liquid media
Riabinina, D., Chaker, M., & Margot, J. (2012) · Nanotechnology · doi:10.1088/0957-4484/23/13/135603 · Cited by 77 · cited 4×
“[88] on the impact of the pulse duration on the productivity investigated only one material and liquid environment, and neither scanning of the laser beam nor a liquid flow were applied.”
BackgroundInfluentialRather, R. A., Singh, S., & Pal, B. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.11.017 · Cited by 74 · cited 3×
“improvement of the photoefficiency is due to the presence of Au NPs [260,271,272], that, thanks to the SPR and high electron density, are able to enhance the electron transfer from the Au NPs to the catalyst [273,274].”
BackgroundHow an oxide shell affects the ultraviolet plasmonic behavior of Ga, Mg, and Al nanostructures
Gutierrez, Y., Ortiz, D., Sanz, J. M., Saiz, J. M., Gonzalez, F., Everitt, H. O., & Moreno, F. (2016) · Optics Express · doi:10.1364/oe.24.020621 · Cited by 73
Surface-Enhanced Raman Spectroscopy on Amorphous Semiconducting Rhodium Sulfide Microbowl Substrates
Li, A., Lin, J., Huang, Z., et al. (2018) · iScience · doi:10.1016/j.isci.2018.11.017 · Cited by 72 · cited 3×
“[206] reported on amorphous rhodium sulfide microbowls, which were successfully designed and synthesized with the guidance of theoretical calculations and characterized by an excellent SERS performance.”
BackgroundMethodInfluentialFiorenza, R., Di Mauro, A., Cantarella, M., Gulino, A., Spitaleri, L., Privitera, V., & Impellizzeri, G. (2020) · Materials Science in Semiconductor Processing · doi:10.1016/j.mssp.2020.105019 · Cited by 68
Messina, G. C., Wagener, P., Streubel, R., De Giacomo, A., Santagata, A., Compagnini, G., & Barcikowski, S. (2013) · Phys. Chem. Chem. Phys. · doi:10.1039/c2cp42626a · Cited by 68 · cited 2×
“[124] achieved ablation rates, which were by a factor of 15 higher compared to a bulk target in the nanosecond-pulsed laser ablation of silver wires in water at a fluence of 1.”
Self-citationBismuth nanoparticles synthesized by laser ablation in lubricant oils for tribological tests
Flores-Castañeda, M., Camps, E., Camacho-López, M. A., Muhl, S., García, E., & Figueroa, M. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.12.054 · Cited by 68 · cited 1×
“In addition, NPs prepared by the Laser Ablation in Liquids (LAL) have been recently used for various and unique applications like friction reduction [34], solar nanofluids [35,36], optical limiting devices [37,38] and so on.”
MethodPredictions on the SERS enhancement factor of gold nanosphere aggregate samples
Litti, L., & Meneghetti, M. (2019) · Physical Chemistry Chemical Physics · doi:10.1039/c9cp02015b · Cited by 67 · cited 3×
“For the active targeting of prostatic cancer cells, nanostructures functionalized with antibodies for prostatic specific membrane antigen (PSMA) and prostate stem cell antigen (PSCA) antigens were considered [178,180].”
BackgroundSelf-citation(1999) · Journal of International Crisis and Risk Communication Research · Cited by 67
Acoustic Energy Storage in Single Bubble Sonoluminescence
Brenner, M. P., Hilgenfeldt, S., Lohse, D., et al. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3467 · Cited by 67
Kononenko, T. V., Garnov, S. V., Klimentov, S. M., Konov, V. I., Loubnin, E. N., Dausinger, F., Raiber, A., & Taut, C. (1997) · Applied Surface Science · doi:10.1016/s0169-4332(96)00905-1 · Cited by 65
Liu, P., Wang, C. X., Chen, X. Y., & Yang, G. W. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp802529r · Cited by 65 · cited 9×
“Various field-assisted LAL techniques have been developed, such as temperature field-assisted LAL [126], electric field-assisted laser ablation in liquid (EFLAL) [127], Magnetic Field-assisted Laser Ablation in Liquid (MFLAL) [128] and electrochemistry-assisted laser ablation in liquid (ECLAL) [129].”
MethodInfluentialFenoll, J., Hellín, P., Martínez, C. M., Flores, P., & Navarro, S. (2012) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2012.04.017 · Cited by 63 · cited 1×
“[228] analyzed the photo-degradation of fungicides in leaching water using the ZnO and TiO2 under solar irradiation: the introduction of atomic defects such as those present in a nonstoichiometric metal oxide makes ZnO a better photocatalyst than TiO2 under solar irradiation.”
BackgroundPhage–AgNPs complex as SERS probe for U937 cell identification
Lentini, G., Fazio, E., Calabrese, F., Plano, L. M. D., Puliafico, M., Franco, D., Nicolò, M. S., Carnazza, S., Trusso, S., Allegra, A., et al. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.05.073 · Cited by 63 · cited 1×
“Laser synthesis of colloids, powered by robust, high-power lasers, appears to be a key enabling process that is chemically clean and environmentally friendly, and appealing [23,24] for industrial manufacturing of functional nanomaterials while being useful in many different areas, such as: hydrogen generation [16], hy…”
BackgroundSelf-citationKohsakowski, S., Santagata, A., Dell’Aglio, M., de Giacomo, A., Barcikowski, S., Wagener, P., & Gökce, B. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.01.077 · Cited by 62 · cited 7×
“[90] investigated the NP productivity of the LAL of gold in an aqueous sodium citrate solution at different pulse durations between 40 fs and 200 ps but a constant fluence of 50 mJ/cm2.”
BackgroundInfluentialSelf-citationCavanagh, J. E., Weinberg, H. S., Gold, A. R., Sangaiah, R., Marbury, D., Glaze, W. H., Collette, T. W., Richardson, S. D., & Thruston, A. D. (1992) · Environmental Science & Technology · doi:10.1021/es00032a027 · Cited by 59
Enhanced EGFR Targeting Activity of Plasmonic Nanostructures with Engineered GE11 Peptide
Biscaglia, F., Rajendran, S., Conflitti, P., Benna, C., Sommaggio, R., Litti, L., Mocellin, S., Bocchinfuso, G., Rosato, A., Palleschi, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700596 · Cited by 59 · cited 3×
“Models for the arrangement of the targeting units on the Au NP surface, obtained with Molecular Dynamics calculations, show that the presence of the short lysine charged sequence is strategic for obtaining the appropriate exposition of the targeting peptide over the PEG chains, collapsed over the NP surface [172,182].”
BackgroundMethodSelf-citationSimultaneous photodegradation of VOC mixture by TiO2 powders
Stucchi, M., Galli, F., Bianchi, C. L., Pirola, C., Boffito, D. C., Biasioli, F., & Capucci, V. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.11.003 · Cited by 59 · cited 1×
“It seems [284] that benzene degrades less quickly when it is mixed with toluene.”
BackgroundFenoll, J., Ruiz, E., Hellín, P., et al. (2011) · Chemosphere · doi:10.1016/j.chemosphere.2011.07.022 · Cited by 57 · cited 1×
“The effect of TiO2 and ZnO on the color fading under light irradiation was deeply discussed in the years highlighting the superior photocatalytic activity sometimes of ZnO and other times of the TiO2 [234,235].”
BackgroundAssessing the Surface Oxidation State of Free-Standing Gold Nanoparticles Produced by Laser Ablation
Villa, M. D. A., Gaudin, J., Amans, D., Boudjada, F., Bozek, J. D., Grisenti, R. E., Lamour, E., Laurens, G., Macé, S., Nicolas, C., et al. (2019) · Langmuir · doi:10.1021/acs.langmuir.9b02159 · Cited by 57
Li, Y., Li, X., Li, J., & Yin, J. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.03.050 · Cited by 56 · cited 1×
“Doping with atomic defects can be achieved by different routes, ranging from vacuum treatments, reducing thermal treatments [265,266] to hydrogen plasmas [267,268], yet one of the more convenient, flexible and environmentally friendly strategies is to use LAL of semiconductor oxide NPs dispersed in liquid (typically w…”
BackgroundLiang, Y., Liu, P., Li, H. B., & Yang, G. W. (2012) · CrystEngComm · doi:10.1039/c2ce06347f · Cited by 55 · cited 1×
“So, Liang and co-workers used three different kinds of combinations, vanadium (target) + copper (electrode) [132], vanadium (target) + silver (electrode) [133] and molybdenum (target) + zinc (electrode) [6], to synthesize ZnMoO4 microand nanoplates and rods, Cu3(OH)2V2O7·2H2O flower-like nanostructures, and Ag2V4O11 b…”
MethodKim, J., Amaranatha Reddy, D., Ma, R., & Kim, T. K. (2014) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2014.09.005 · Cited by 55 · cited 2×
“is strongly indicated by the observed smaller NP diameters at shorter applied wavelengths [54,69,70],”
BackgroundTakeshi Tsuji, T. T., Kenzo Iryo, K. I., Hidefumi Ohta, H. O., & Yukio Nishimura, Y. N. (2000) · Japanese Journal of Applied Physics · doi:10.1143/jjap.39.l981 · Cited by 54 · cited 2×
“A variation of the laser fluence may be realized by either varying the pulse energy [67,70,71,82–90] or the spot area via the working distance [67,85,91].”
BackgroundWolfsteller, A., Geyer, N., Nguyen-Duc, T.-K., Das Kanungo, P., Zakharov, N. D., Reiche, M., Erfurth, W., Blumtritt, H., Kalem, S., Werner, P., et al. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2009.08.021 · Cited by 54 · cited 1×
“Bottom-up and top-down procedures are the two approaches used for the synthesis of nanomaterials [5].”
MethodBiscaglia, F., Ripani, G., Rajendran, S., Benna, C., Mocellin, S., Bocchinfuso, G., Meneghetti, M., Palleschi, A., & Gobbo, M. (2019) · ACS Applied Nano Materials · doi:10.1021/acsanm.9b01392 · Cited by 54
Self-citationDell'Aglio, M., & De Giacomo, A. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146031 · Cited by 54 · cited 6×
“The numb r of ejected AgNPs has been calculated as reported in [62].”
BackgroundMethodInfluentialSelf-citationDittrich, S., Streubel, R., McDonnell, C., Huber, H. P., Barcikowski, S., & Gökce, B. (2019) · Applied Physics A · doi:10.1007/s00339-019-2704-8 · Cited by 53 · cited 1×
“compared the absolute and power-specific productivity of LAL of gold in water for a compact, a middle class and a high-end laser system [101].”
BackgroundSelf-citationRhodium plasmonics for deep-ultraviolet bio-chemical sensing
Ahmadivand, A., Sinha, R., Kaya, S., & Pala, N. (2016) · Plasmonics · doi:10.1007/s11468-015-0117-x · Cited by 53 · cited 1×
“In the ultraviolet (UV) region the considerable damping due to interband transitions [185] make electromagnetic enhancements comparatively small.”
BackgroundLaser fragmentation of organic microparticles into colloidal nanoparticles in a free liquid jet
Wagener, P., & Barcikowski, S. (2010) · Applied Physics A · doi:10.1007/s00339-010-5814-x · Cited by 53 · cited 1×
“The emission spectrum of the Laser Induced Plasma (LIP) under water is characterized mainly by continuum radiation with possibly some resonance peaks of the element constituting the target [40].”
BackgroundLaser processing of TiO2 colloids for an enhanced photocatalytic water splitting activity
Filice, S., Compagnini, G., Fiorenza, R., Scirè, S., D’Urso, L., Fragalà, M. E., Russo, P., Fazio, E., & Scalese, S. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.08.013 · Cited by 51 · cited 2×
“[257] confirmed a long living and an extended catalytic efficiency in the visible spectrum for water photo-splitting by titania colloids, modified by nanosecond pulsed laser irradiation.”
BackgroundSelf-citationLaser generated nanoparticles based photovoltaics
Petridis, C., Savva, K., Kymakis, E., & Stratakis, E. I. (2016) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2016.09.065 · Cited by 50 · cited 1×
“Such laser techniques are interesting in many regards, as they enable the processing of photovoltaic cells [10], thermoelectric materials and devices [11], micro and nanosystems for energy storage and conversion [12,13], biodegradable and biocompatible NPs for food packaging [14] as well as vectors for drug and gene d…”
BackgroundNanotechnology, from quantum mechanical calculations up to drug delivery
Szefler, B. (2018) · International Journal of Nanomedicine · doi:10.2147/ijn.s172907 · Cited by 49 · cited 1×
“, size distribution, agglomeration state/dispersion, crystal structure, surface area and porosity, surface charge, shape/morphology, dissolution/solubility) make them a hot research topic in material science, with far-reaching applications, ranging from quantum computers to cures for cancer [3,4].”
BackgroundFiorenza, R., Bellardita, M., Scirè, S., & Palmisano, L. (2018) · Molecular Catalysis · doi:10.1016/j.mcat.2018.06.002 · Cited by 47
Ismail, R. A., & Fadhil, F. A. (2014) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-014-1747-z · Cited by 45 · cited 1×
“[134] reported the production of Bi2O3 NPs by the pulsed laser ablation in water under the effect of the electric field (EFLAL).”
BackgroundPromoting the yield of nanoparticles from laser ablation in liquid
Jiang, Y., Liu, P., Liang, Y., Li, H. B., & Yang, G. W. (2011) · Applied Physics A · doi:10.1007/s00339-011-6557-z · Cited by 45 · cited 1×
“Liquid Environment: The relative motion [117,118], layer height [86,119,120] and physicochemical nature [66,71,121] of the liquid environment influence the productivity in LAL, as explained in the following.”
BackgroundHigh aspect ratio β-MnO2 nanowires and sensor performance for explosive gases
Xiao, J., Liu, P., Liang, Y., Li, H. B., & Yang, G. W. (2013) · Journal of Applied Physics · doi:10.1063/1.4819218 · Cited by 45 · cited 2×
“Various field-assisted LAL techniques have been developed, such as temperature field-assisted LAL [126], electric field-assisted laser ablation in liquid (EFLAL) [127], Magnetic Field-assisted Laser Ablation in Liquid (MFLAL) [128] and electrochemistry-assisted laser ablation in liquid (ECLAL) [129].”
MethodAmadelli, R., Samiolo, L., Borsa, M., Bellardita, M., & Palmisano, L. (2013) · Catalysis Today · doi:10.1016/j.cattod.2011.11.031 · Cited by 45
Surface‐enhanced Raman spectroscopy with ultraviolet excitation
Lin, X., Ren, B. W., Yang, Z., Liu, G., & Tian, Z. (2005) · Journal of Raman Spectroscopy · doi:10.1002/jrs.1338 · Cited by 45 · cited 1×
“[202] reported UV-SERS on Rh nanostructured surfaces, and estimated the enhancement factor to be about 102; • Zettsu et al.”
BackgroundLaser light triggered smart release of silibinin from a PEGylated–PLGA gold nanocomposite
Fazio, E., Scala, A., Grimato, S., Ridolfo, A., Grassi, G., & Neri, F. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01076d · Cited by 45 · cited 1×
“There are many literature papers on laser interaction with hard, soft and smart materials, targeting future applications in the fields of energy production (nano-energy) and biomedicine [8], as well as recent progress in the understanding of the fundamental mechanisms involved in laser processing [9].”
BackgroundSelf-citationLetzel, A., Santoro, M., Frohleiks, J., Ziefuß, A. R., Reich, S., Plech, A., Fazio, E., Neri, F., Barcikowski, S., & Gökce, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.025 · Cited by 44 · cited 1×
“[79] recently observed a significant increase in the productivity of the laser ablation of silver in water during the first 250 laser pulses irradiating an initially smooth target surface.”
BackgroundSelf-citation
Research works printed but not linked: 10
- Stafe M. Negutu C. Puscas N.N. Popescu I. Pulsed laser ablation of solids Rom. Rep. Phys. 2010 62 758 770
- Nedialkov N.N. Atanasov P.A. Sawczak M. Sliwinski G. Ablation of ceramics with ultraviolet, visible, and infrared nanosecond laser pulses Proceedings of the XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers Wrocław, Poland 25–30 August 2002 703 709
- Al-Haddad R.M.S. Hamid M.K. Jumaa T. Electric field effect on the synthesis of nanogold particles by PLAL Int. J. Chem. Nat. Sci. 2015 3 269 274
- Santoro M. Fazio E. Trusso S. Ossi P.M. Tommasini M. Neri F. Rhodium nanoparticles synthesized by nanosecond and picosecond Pulsed Laser Ablation in Liquid. GISR2016 Proceedings of the Italian Meeting on Raman Spectroscopy and Non Linear Optic Effects Padova, Italy 14–16 September 2016
- Santoro M. Bertoncini A. Fazio E. Tommasini M. Neri F. Ossi P.M. Trusso S. Nanostructured Rhodium Thin Films Deposited by Pulsed Laser Deposition for SERS Detection. CNS2018—4° Proceedings of the Congresso Nazionale Sensori Catania, Italy 21–23 February 2018
- Eibner A. Action of Light on Pigments Chem. Ztg. 1911 35 753 775
- Keidel E. The Fading of Aniline Dyes in the Presence of Titanium White Farben Ztg. 1929 34 1242 1243
- Osugi M. Aoki S. On the photoxidation of ammonium compounds in solution and soil Jpn. J. Soil Manure. 1936 10 11 24
- Frenkel J. On the Absorption of Light and the Trapping of Electrons and Positive Holes in Crystalline Dielectrics Phys. Zs. Sowjetunion. 1936 9 158 186
- Negrea P. Sidea F. Negrea A. Lupa L. Ciopec M. Muntean C. Stuies regarding the Benzene, Toluene and o-Xylene Removal from Waste Water Politeh. Univ. 2008 53 1 2
Cited by
Fazio, E., Spadaro, S., Corsaro, C., Neri, G., Leonardi, S. G., Neri, F., Lavanya, N., Sekar, C., Donato, N., & Neri, G. (2021) · Sensors · doi:10.3390/s21072494 · Cited by 274
Self-citationZoubi, W. A., Putri, R. A. K., Abukhadra, M. R., & Ko, Y. G. (2023) · Nano Energy · doi:10.1016/j.nanoen.2023.108362 · Cited by 142
Yogesh, G. K., Shukla, S., Sastikumar, D., & Koinkar, P. (2021) · Applied Physics A · doi:10.1007/s00339-021-04951-6 · Cited by 149
Khairani, I. Y., Mínguez-Vega, G., Doñate-Buendía, C., & Gökce, B. (2023) · Physical Chemistry Chemical Physics · doi:10.1039/d3cp01214j · Cited by 130
Self-citationSynergistic antibacterial mechanism of silver-copper bimetallic nanoparticles
Hao, Z., Wang, M., Cheng, L., Si, M., Feng, Z., & Feng, Z. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2023.1337543 · Cited by 125
“Compared to several prevalent manufacturing techniques, PLAL offers faster production of BNPs and effective control over the size distribution, yield, and shape of nanoparticles (Fazio et al., 2020; Nyabadza et al., 2023).”
Method
Metadata
- Authors
- Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., Dell’Aglio, M., D’Urso, L., Condorelli, M., Scardaci, V., Biscaglia, F., Litti, L., Gobbo, M., Gallo, G., Santoro, M., Trusso, S., & Neri, F.
- Affiliations
- University of Messina (IT)
- University of Duisburg-Essen (DE)
- Department of Chemistry, University of Bari, Via Orabona 4, 70126 Bari, Italy
- University of Padua (IT)
- University of Catania (IT)
- Politecnico di Milano (IT)
- Istituto di Nanotecnologia (IT)
- STMicroelectronics (Italy) (IT)
- Institute for Chemical and Physical Processes (IT)
- Corresponding author
- Fazio, Enza
- ORCID
- Fazio, Enza
- Gökce, Bilal
- De Giacomo, Alessandro
- Meneghetti, Moreno
- Compagnini, Giuseppe
- Tommasini, Matteo
- Waag, Friedrich
- Lucotti, Andrea
- Zanchi, Chiara Giuseppina
- Ossi, Paolo Maria
- Dell’Aglio, Marcella
- D’Urso, Luisa
- Condorelli, Marcello
- Scardaci, Vittorio
- Litti, Lucio
- Gobbo, Marina
- Gallo, Giovanni
- Trusso, Sebastiano
- Neri, Fortunato
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2020-11-23
- Volume
- 10
- Issue
- 11
- Pages
- 2317
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC7700616
- OpenAlex
- W3108657096
- Cited by
- 346
- References
- 288
- Citations by year
- 2026: 62 · 2025: 83 · 2024: 65 · 2023: 66 · 2022: 45 · 2021: 24
- FWCI
- 2.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, other-oa)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- CINECA IRIS Institutional Research Information System (University of Bari Aldo Moro) (submittedVersion)
- Padua Research Archive (University of Padova) (submittedVersion, cc-by)
- Funders
- Università degli Studi di Padova (04SID2016, 08SID2017)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Laser-Ablation Synthesis of Nanoparticles
- Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Ultrasound and Cavitation Phenomena
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Gold and Silver Nanoparticles Synthesis and Applications
- Keywords
- pulsed laser ablation in liquid, laser synthesis, ligand-free nanoparticles, nanocolloids, functionalized nanomaterials, scalable nanoparticle synthesis, biomedical applications, catalysis, sensing, energy applications, environmental applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.