Soft, Formstable (Co)Polyester Blend Elastomers
Open accessThe DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Abstract
High crystallization rate and thermomechanical stability make polylactide stereocomplexes effective nanosized physical netpoints. Here, we address the need for soft, form-stable degradable elastomers for medical applications by designing such blends from (co)polyesters, whose mechanical properties are ruled by their nanodimensional architecture and which are applied as single components in implants. By careful controlling of the copolymer composition and sequence structure of poly[(L-lactide)-co-(ε-caprolactone)], it is possible to prepare hyperelastic polymer blends formed through stereocomplexation by adding poly(D-lactide) (PDLA). Low glass transition temperature Tg ≤ 0 °C of the mixed amorphous phase contributes to the low Young’s modulus E. The formation of stereocomplexes is shown in DSC by melting transitions Tm > 190 °C and in WAXS by distinct scattering maxima at 2θ = 12° and 21°. Tensile testing demonstrated that the blends are soft (E = 12–80 MPa) and show an excellent hyperelastic recovery Rrec = 66–85% while having high elongation at break εb up to >1000%. These properties of the blends are attained only when the copolymer has 56–62 wt% lactide content, a weight average molar mass >140 kg·mol−1, and number average lactide sequence length ≥4.8, while the blend is formed with a content of 5–10 wt% of PDLA. The devised strategy to identify a suitable copolymer for stereocomplexation and blend formation is transferable to further polymer systems and will support the development of thermoplastic elastomers suitable for medical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures





Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“To assess molar mass based on the obtained 1 H-NMR data, an estimated error of 12% was accounted for, considering factors such as saturation effects, intensity losses from isotropic sidebands, sample non-uniformity in the magnetic field, and line shape contributing to peak overlapping.34”
From Correlative characterization of stereocomplex formation in blends of aliphatic polyester P(PCL m - b -PLLA n ) multiblock-copolymers and PDLA (2026) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Sn(Oct)2 and other catalysts that allow rapid transesterifications between polyester chains can provide more randomized structures at long reaction times, but mostly with higher dispersities.64”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [64]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Alternative catalysts, such as Sn(Oct)2, produce much higher randomized structures than the Fe(OAc)2/DEAA catalyst via transesterification.64”
From Iron( ii ) carboxylates and simple carboxamides: an inexpensive and modular catalyst system for the synthesis of PLLA and PLLA-PCL block copolymers (2023) · cites this paper as [64]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707 · cited 1×
“A Tg of the copolymer ≤ 0 ◦C is theoretically reached at a weight fraction of ≤65 wt% of LA (Tg,PLA = 50 ◦C) [34] and ≥35 wt% of CL (Tg,PCL = −60 ◦C) [35].”
BackgroundSynthesis of polycaprolactone: A review
Labet, M., & Thielemans, W. (2009) · Chemical Society Reviews · doi:10.1039/b820162p · Cited by 1,673
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Biodegradable polymer matrix nanocomposites for tissue engineering: A review
Armentano, I., Dottori, M., Fortunati, E., Mattioli, S., & Kenny, J. M. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.007 · Cited by 999
Molecular model of drawing polyethylene and polypropylene
Peterlin, A. (1971) · Journal of Materials Science · doi:10.1007/bf00550305 · Cited by 987 · cited 1×
“Plastic deformation of the materials is likely to be observed at high applied strains ε, while the increase of the overall crystallinity φc decreases the ε threshold value, at which irreversible restructuring of crystallites starts [27].”
BackgroundPCL and PCL-based materials in biomedical applications
Malikmammadov, E., Tanir, T. E., Kiziltay, A., Hasirci, V., & Hasirci, N. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2017.1394711 · Cited by 894
Mohr, R., Kratz, K., Weigel, T., Lucka-Gabor, M., Moneke, M., & Lendlein, A. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0600079103 · Cited by 819 · cited 1×
“This is a bit higher than typically observed in physical networks such as multiblock copolymers (Rrec = 55–85%) [55], thermoplastic polyurethanes (Rrec ~ 70%) [56]; (Rrec = 47–80%) [57], poly(butylene 1,4-cyclohexanedicarboxylate) (Rrec = 11–64%) [58], or poly(butylene terephthalate)/ethylene rubber blends (Rrec ~ 60%…”
BackgroundSelf-citationPoly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Thermoplastic elastomers: fundamentals and applications
Spontak, R. J., & Patel, N. P. (2000) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(00)00070-4 · Cited by 408
Fernández, J., Etxeberria, A., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.003 · Cited by 217 · cited 1×
“The information on the relative dyad content together with the molar ratio of lactide and caprolactone can be used to determine the number average sequence length of lactide and caprolactone blocks as well as the randomness of the copolymer [43].”
MethodCrystallinity and mechanical properties of optically pure polylactides and their blends
Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering & Science · doi:10.1002/pen.20331 · Cited by 214 · cited 1×
“Generally, this is to be expected [52].”
Hong, K., Rastogi, A., & Strobl, G. (2004) · Macromolecules · doi:10.1021/ma049174h · Cited by 192
Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers
Watts, A., Kurokawa, N., & Hillmyer, M. A. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00283 · Cited by 188
de Jong, S. J., van Dijk-Wolthuis, W. N. E., Kettenes-van den Bosch, J. J., Schuyl, P. J. W., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980553i · Cited by 172
Chen, H.-Y., Huang, B.-H., & Lin, C.-C. (2005) · Macromolecules · doi:10.1021/ma050672f · Cited by 166 · cited 1×
“Due to the lower reactivity of CL in comparison to LA [39], copolymerization without transesterification, as can be received with other catalysts [40] or by adding a transesterification inhibitor [41], would give gradient or block copolymers.”
BackgroundPolymerization temperature effects on the properties of l-lactide and ?-caprolactone copolymers
Grijpma, D. W., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316903 · Cited by 165
Kasperczyk, J., & Bero, M. (1993) · Die Makromolekulare Chemie · doi:10.1002/macp.1993.021940315 · Cited by 150
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143 · cited 1×
“It is known that stereocomplexes also form outside this ratio [46], but for a qualitative understanding of our system, this approximation can be taken as valid.”
BackgroundBehl, M., Ridder, U., Feng, Y., Kelch, S., & Lendlein, A. (2009) · Soft Matter · doi:10.1039/b810583a · Cited by 125
Self-citationAnother approach to the Gibbs–Thomson equation and the melting point of polymers and oligomers
Höhne, G. W. H. (2002) · Polymer · doi:10.1016/s0032-3861(02)00305-1 · Cited by 121
Remarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Ma, P., Shen, T., Xu, P., Dong, W., Lemstra, P. J., & Chen, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00208 · Cited by 108
Ni(II) α-Diimine-Catalyzed α-Olefins Polymerization: Thermoplastic Elastomers of Block Copolymers
Leone, G., Mauri, M., Bertini, F., Canetti, M., Piovani, D., & Ricci, G. (2015) · Macromolecules · doi:10.1021/ma502427u · Cited by 107
Han, L., Shan, G., Bao, Y., & Pan, P. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06757 · Cited by 94
Huang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00855 · Cited by 87 · cited 2×
“Such behavior was also observed for other stereo-complex-based TPEs [30,31].”
BackgroundPurnama, P., Jung, Y., & Kim, S. H. (2012) · Macromolecules · doi:10.1021/ma202814c · Cited by 80
Molecular Recognition in Poly(ε-caprolactone)-Based Thermoplastic Elastomers
Wisse, E., Spiering, A. J. H., van Leeuwen, E. N. M., Renken, R. A. E., Dankers, P. Y. W., Brouwer, L. A., van Luyn, M. J. A., Harmsen, M. C., Sommerdijk, N. A. J. M., & Meijer, E. W. (2006) · Biomacromolecules · doi:10.1021/bm060688t · Cited by 75
Direct correlation between modulus and the crystalline structure in isotactic polypropylene
Menyhard, A., Suba, P., Laszlo, Z., Fekete, H. M., Mester, A. O., Horvath, Z., Voros, G., Varga, J., & Moczo, J. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.28 · Cited by 69
Micro‐ and nanostructures of polylactide stereocomplexes and their biomedical applications
Brzeziński, M., & Biela, T. (2015) · Polymer International · doi:10.1002/pi.4961 · Cited by 63
Lendlein, A., Neuenschwander, P., & Suter, U. W. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/1521-3935(20000701)201:11<1067::aid-macp1067>3.0.co;2-y · Cited by 63
Kurokawa, N., & Hotta, A. (2018) · Polymer · doi:10.1016/j.polymer.2018.08.018 · Cited by 63
Tsuji, H., & Bouapao, L. (2012) · Polymer International · doi:10.1002/pi.3219 · Cited by 59 · cited 1×
“It has been shown in the literature that the formation of stereocomplexes tends to be faster when one component has a disproportionally smaller molar mass than the other [37].”
BackgroundWang, H., Yu, J., Fang, H., Wei, H., Wang, X., & Ding, Y. (2018) · Polymer · doi:10.1016/j.polymer.2017.12.067 · Cited by 56
Soft segment free thermoplastic polyester elastomers with high performance
Liu, F., Zhang, J., Wang, J., Liu, X., Zhang, R., Hu, G., Na, H., & Zhu, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03325j · Cited by 52
Synthesis of biodegradable thermoplastic elastomers from ε‐caprolactone and lactide
Nakayama, Y., Aihara, K., Yamanishi, H., Fukuoka, H., Tanaka, R., Cai, Z., & Shiono, T. (2015) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27463 · Cited by 52
Park, Y. J., Cha, J. H., Bang, S. I., & Kim, S. Y. (2018) · Aesthetic Plastic Surgery · doi:10.1007/s00266-018-1280-1 · Cited by 52
Absorbable Implant to Treat Nasal Valve Collapse
Nicoló, M. S., Stelter, K., Sadick, H., Baş, M., & Berghaus, A. (2017) · Facial Plastic Surgery · doi:10.1055/s-0037-1598655 · Cited by 46
Shelke, N. B., Nagarale, R. K., & Kumbar, S. G. (2014) · Elsevier eBooks · doi:10.1016/b978-0-12-396983-5.00007-7 · Cited by 45
García-Valle, F. M., Cuenca, T., Mosquera, M. E. G., Milione, S., & Cano, J. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109527 · Cited by 41
Statistical analysis of copolymer sequence distribution
Herbert, I. R. (1993) · Springer eBooks · doi:10.1007/978-94-011-2150-7_2 · Cited by 40
Formation of Stereocomplex Crystal and Its Effect on the Morphology and Property of PDLA/PLLA Blends
Su, X., Feng, L., & Yu, D. (2020) · Polymers · doi:10.3390/polym12112515 · Cited by 39
Wei, Z., Liu, L., Qu, C. Y., & Qi, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.015 · Cited by 37
Strain recovery mechanism of PBT/rubber thermoplastic elastomer
Aoyama, T., Angola, J. C., Saito, H., Inoue, T., & Niitsu, Y. (1999) · Polymer · doi:10.1016/s0032-3861(98)00585-0 · Cited by 34
Ye, S., Xiang, X., Wang, S., Han, D., Xiao, M., & Meng, Y. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06294 · Cited by 34
Sartoneva, R., Nordback, P. H., Haimi, S., Grijpma, D. W., Lehto, K., Rooney, N., Seppänen-Kaijansinkko, R., Miettinen, S., & Lahdes-Vasama, T. (2018) · Tissue Engineering Part A · doi:10.1089/ten.tea.2016.0245 · Cited by 33
Poh, P. S. P., Hege, C. S., Chhaya, M. P., Balmayor, E. R., Foehr, P., Burgkart, R., Schantz, J., Schiller, S., Schilling, A. F., & Hutmacher, D. W. (2016) · Polymer International · doi:10.1002/pi.5181 · Cited by 31
Handling characteristics of poly(L-lactide-co-epsilon-caprolactone) monofilament suture.
Tomihata, K., Suzuki, M., & Tomita, N. (2005) · PubMed · Cited by 25
Izraylit, V., Gould, O. E. C., Rudolph, T., Kratz, K., & Lendlein, A. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01279 · Cited by 25
Self-citationBhutto, M. A., Zhang, J., Sun, B., El‐Hamshary, H., Al‐Deyab, S. S., & Mo, X. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2015.1099104 · Cited by 23
Izraylit, V., Heuchel, M., Gould, O. E. C., Kratz, K., & Lendlein, A. (2020) · Polymer · doi:10.1016/j.polymer.2020.122984 · Cited by 22
Self-citationFabbri, M., Soccio, M., Gigli, M., Guidotti, G., Gamberini, R., Gazzano, M., Siracusa, V., Rimini, B., Lotti, N., & Munari, A. (2015) · Polymer · doi:10.1016/j.polymer.2015.12.022 · Cited by 21
Rheological study of crystallization behavior of polylactide and its flax fiber composites
Arias, A., Sojoudiasli, H., Heuzey, M., Huneault, M. A., & Wood‐Adams, P. M. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1210-y · Cited by 19
Fernández, J., Etxeberria, A., & Sarasua, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42534 · Cited by 16
The Laryngoscope: Table of contents
Sidle, D. M., Stolovitzky, P., Ow, R. A., Silvers, S., Matheny, K. E., Bikhazi, N., Wani, M. K., Scurry, W., & Most, S. P. (2019) · The Laryngoscope · doi:10.1002/lary.28151 · Cited by 15
Study of partial shape memory effect of polymers by multicycle tests
Abdallah-Elhirtsi, S., Fitoussi, J., Rashmi, B. J., Prashantha, K., Farzaneh, S., Lacrampe, M., Krawczak, P., & Tcharkhtchi, A. (2015) · Polymer Composites · doi:10.1002/pc.23472 · Cited by 13
Lipik, V. T., & Abadie, M. J. M. (2012) · International Journal of Biomaterials · doi:10.1155/2012/390947 · Cited by 11 · cited 1×
“Due to the lower reactivity of CL in comparison to LA [39], copolymerization without transesterification, as can be received with other catalysts [40] or by adding a transesterification inhibitor [41], would give gradient or block copolymers.”
BackgroundTang, J. H., Hu, J.-F., Guo, W.-C., Yu, L., & Zhao, S.-H. (2013) · PubMed · Cited by 9
Izraylit, V., Hommes‐Schattmann, P. J., Neffe, A. T., Gould, O. E. C., & Lendlein, A. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109916 · Cited by 6
Self-citationErratum: Absorbable Implant to Treat Nasal Valve Collapse
Stelter, K., Sadick, H., Baş, M., Berghaus, A., & Nicoló, M. S. (2017) · Facial Plastic Surgery · doi:10.1055/s-0037-1603201 · Cited by 1
Schmidt (2001) · doi:10.1002/1099-0488(20010201)39:3<300::aid-polb1002>3.0.co;2-m
Cited by
Alkhamis, H., Saretia, S., Schwanz, S., Machatschek, R., Neffe, A. T., & Polak-Kraśna, K. (2025) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2025.111267 · Cited by 12
Self-citationKirchhecker, S., Nguyen, N., Reichert, S., Lützow, K., Eselem Bungu, P. S., Jacobi von Wangelin, A., Sandl, S., & Neffe, A. T. (2023) · RSC Advances · doi:10.1039/d3ra03112h · Cited by 6
Self-citationMandlule, A., Liu, Y., Schwanz, S., Pieper, Y., Scharf, H., Iskhakova, K., Conceição, A. L. C., Wieland, D. C. F., Zeller-Plumhoff, B., Toma, F. M., et al. (2026) · Materials Advances · doi:10.1039/d5ma00886g · Cited by 6
Self-citationChen, C.-M., Chang, H.-L., & Lee, C. (2022) · Polymers · doi:10.3390/polym14163319 · Cited by 5
Synthesis of Bio-Based Polyester from Microbial Lipidic Residue Intended for Biomedical Application
Capêto, A. P., Azevedo‐Silva, J., Sousa, S. C., Pintado, M., Guimarães, A. S., & Oliveira, A. L. S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24054419 · Cited by 4
Metadata
- Authors
- Neffe, A., Izraylit, V., Hommes-Schattmann, P., & Lendlein, A.
- Affiliations
- Helmholtz-Zentrum Hereon (DE)
- University of Potsdam (DE)
- Institute of Active Polymers, Helmholtz-Zentrum Hereon, 14513 Teltow, Germany
- Corresponding author
- Lendlein, Andreas
- Venue
- Nanomaterials
- Publisher
- MDPI AG
- Published
- 2021-06-01
- Volume
- 11
- Issue
- 6
- Pages
- 1472
- ISSN
- 2079-4991 (ISSN-L)
- PMC
- PMC8230036
- OpenAlex
- W3172778829
- Cited by
- 9
- References
- 61
- Citations by year
- 2026: 2 · 2025: 4 · 2023: 2 · 2022: 1
- FWCI
- 0.20
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Nanomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- publish.UP (University of Potsdam) (submittedVersion, cc-by)
- Funders
- Helmholtz-Gemeinschaft (programme-oriented funding)
- Seventh Framework Programme (604049)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- polyester blends, stereocomplexation, poly(L-lactide-co-ε-caprolactone), poly(D-lactide), degradable polymers, biomedical implants, crystallization, sequence structure, glass transition temperature, Young's modulus, thermoplastic elastomers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.