The DOI matches its Crossref record; 169 of the 169 references it cites were found in a registry or an index.
Natural-Fiber-Reinforced Chitosan, Chitosan Blends and Their Nanocomposites for Various Advanced Applications
Open accessAbstract
There has been much effort to provide eco-friendly and biodegradable materials for the next generation of composite products owing to global environmental concerns and increased awareness of renewable green resources. This review article uniquely highlights the use of green composites from natural fiber, particularly with regard to the development and characterization of chitosan, natural-fiber-reinforced chitosan biopolymer, chitosan blends, and chitosan nanocomposites. Natural fiber composites have a number of advantages such as durability, low cost, low weight, high specific strength, non-abrasiveness, equitably good mechanical properties, environmental friendliness, and biodegradability. Findings revealed that chitosan is a natural fiber that falls to the animal fiber category. As it has a biomaterial form, chitosan can be presented as hydrogels, sponges, film, and porous membrane. There are different processing methods in the preparation of chitosan composites such as solution and solvent casting, dipping and spray coating, freeze casting and drying, layer-by-layer preparation, and extrusion. It was also reported that the developed chitosan-based composites possess high thermal stability, as well as good chemical and physical properties. In these regards, chitosan-based “green” composites have wide applicability and potential in the industry of biomedicine, cosmetology, papermaking, wastewater treatment, agriculture, and pharmaceuticals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitin and chitosan: Properties and applications
Rinaudo, M. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.06.001 · Cited by 8,259
A review of chitin and chitosan applications
Ravi Kumar, M. N. V. (2000) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(00)00038-9 · Cited by 6,009
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Biocomposites reinforced with natural fibers: 2000–2010
Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.04.003 · Cited by 4,262
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149
Biomaterials based on chitin and chitosan in wound dressing applications
Jayakumar, R., Prabaharan, M., Sudheesh Kumar, P. T., Nair, S. V., & Tamura, H. (2011) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.01.005 · Cited by 1,924
Dhivya, S., Padma, V. V., & Santhini, E. (2015) · BioMedicine · doi:10.7603/s40681-015-0022-9 · Cited by 1,526
Physical approaches to biomaterial design
Mitragotri, S., & Lahann, J. (2009) · Nature Materials · doi:10.1038/nmat2344 · Cited by 1,445
Chitin/chitosan: modifications and their unlimited application potential—an overview
Harish Prashanth, K. V., & Tharanathan, R. N. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.10.022 · Cited by 1,147
A review on chitosan and its nanocomposites in drug delivery
Ali, A., & Ahmed, S. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.078 · Cited by 1,127
Green composites: A brief review
La Mantia, F. P., & Morreale, M. (2011) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.01.017 · Cited by 1,125
Siripatrawan, U., & Harte, B. R. (2010) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2010.04.003 · Cited by 1,125
Chitosan as a bioactive polymer: Processing, properties and applications
Muxika, A., Etxabide, A., Uranga, J., Guerrero, P., & de la Caba, K. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.087 · Cited by 1,113
Gholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Native Cellulose: Structure, Characterization and Thermal Properties
Poletto, M., Ornaghi, H., & Zattera, A. (2014) · Materials · doi:10.3390/ma7096105 · Cited by 1,038
Chitosan as an environment friendly biomaterial – a review on recent modifications and applications
Bakshi, P. S., Selvakumar, D., Kadirvelu, K., & Kumar, N. S. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.10.113 · Cited by 1,016
Thyavihalli Girijappa, Y. G., Mavinkere Rangappa, S., Parameswaranpillai, J., & Siengchin, S. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00226 · Cited by 1,011
Chitosan-based drug delivery systems
Bernkop-Schnürch, A., & Dünnhaupt, S. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.04.007 · Cited by 991
Edible films and coatings: Structures, active functions and trends in their use
Falguera, V., Quintero, J. P., Jiménez, A., Muñoz, J. A., & Ibarz, A. (2011) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2011.02.004 · Cited by 939
A review on wound dressings with an emphasis on electrospun nanofibrous polymeric bandages
Zahedi, P., Rezaeian, I., Ranaei‐Siadat, S., Jafari, S., & Supaphol, P. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1625 · Cited by 906
Aider, M. (2010) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2010.01.021 · Cited by 881
Emerging Chitosan-Based Films for Food Packaging Applications
Wang, H., Qian, J., & Ding, F. (2018) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.7b04528 · Cited by 859
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Chitosan as a Wound Dressing Starting Material: Antimicrobial Properties and Mode of Action
Matica, M. A., Aachmann, F. L., Tøndervik, A., Sletta, H., & Ostafe, V. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20235889 · Cited by 818
A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers
Ramamoorthy, S. K., Skrifvars, M., & Persson, A. (2015) · Polymer Reviews · doi:10.1080/15583724.2014.971124 · Cited by 801
Chitosan: some pharmaceutical and biological aspects - an update
Singla, A. K., & Chawla, M. (2001) · Journal of Pharmacy and Pharmacology · doi:10.1211/0022357011776441 · Cited by 784
Karimah, A., Ridho, M. R., Munawar, S. S., Adi, D. S., Ismadi, Damayanti, R., Subiyanto, B., Fatriasari, W., & Fudholi, A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.06.014 · Cited by 771
Chitosan Composites for Bone Tissue Engineering—An Overview
Venkatesan, J., & Kim, S.-K. (2010) · Marine Drugs · doi:10.3390/md8082252 · Cited by 705
Moeini, A., Pedram, P., Makvandi, P., Malinconico, M., & Gomez d'Ayala, G. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115839 · Cited by 691
Chitosan as biomaterial in drug delivery and tissue engineering
Ahsan, S. M., Thomas, M., Reddy, K. K., Sooraparaju, S. G., Asthana, A., & Bhatnagar, I. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.140 · Cited by 684
Catechol-functionalized chitosan/pluronic hydrogels for tissue adhesives and hemostatic materials
Ryu, J. H., Lee, Y., Kong, W. H., Kim, T. G., Park, T. G., & Lee, H. (2011) · Biomacromolecules · doi:10.1021/bm200464x · Cited by 677
Preparation and characterization of chitosan/gelatin/PVA hydrogel for wound dressings
Fan, L., Yang, H., Yang, J., Peng, M., & Hu, J. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.03.002 · Cited by 651
Pharmaceutical applications of chitosan
Shariatinia, Z. (2019) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2018.11.008 · Cited by 642
Film formation and deposition methods of edible coating on food products: A review
Suhag, R., Kumar, N., Petkoska, A. T., & Upadhyay, A. (2020) · Food Research International · doi:10.1016/j.foodres.2020.109582 · Cited by 613
Norizan, M. N., Asyraf, M. R. M., Rayung, M., Norrrahim, M. N. F., Shazleen, S. S., Rani, M. S. A., Shafi, A. R., Aisyah, H. A., Radzi, M. H. M., Sabaruddin, F. A., et al. (2021) · Polymers · doi:10.3390/polym13162710 · Cited by 612
Self-citationCopper adsorption on chitosan–cellulose hydrogel beads: behaviors and mechanisms
Li, N., & Bai, R. (2005) · Separation and Purification Technology · doi:10.1016/j.seppur.2004.08.002 · Cited by 540
Physical, structural and antimicrobial properties of poly vinyl alcohol–chitosan biodegradable films
Bonilla, J., Fortunati, E., Atarés, L., Chiralt, A., & Kenny, J. M. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.07.002 · Cited by 518
Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications
Ilyas, R. A., Sapuan, S. M., Harussani, M. M., Hakimi, M. Y. A. Y., Haziq, M. Z. M., Atikah, M. S. N., Asyraf, M. R. M., Ishak, M. R., Razman, M. R., Nurazzi, N. M., et al. (2021) · Polymers · doi:10.3390/polym13081326 · Cited by 513
Self-citationEffects of edible chitosan coating on quality and shelf life of sliced mango fruit
Chien, P.-J., Sheu, F., & Yang, F.-H. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2005.09.022 · Cited by 504
Novel biodegradable electrospun membrane: scaffold for tissue engineering
Bhattarai, S. R., Bhattarai, N., Yi, H. K., Hwang, P. H., Cha, D. I., & Kim, H. Y. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.043 · Cited by 480
Nurazzi, N. M., Asyraf, M. R. M., Fatimah Athiyah, S., Shazleen, S. S., Rafiqah, S. A., Harussani, M. M., Kamarudin, S. H., Razman, M. R., Rahmah, M., Zainudin, E. S., et al. (2021) · Polymers · doi:10.3390/polym13132170 · Cited by 462
Self-citationVásconez, M. B., Flores, S. K., Campos, C. A., Alvarado, J., & Gerschenson, L. N. (2009) · Food Research International · doi:10.1016/j.foodres.2009.02.026 · Cited by 454
Effect of alkali treatment on interfacial bonding in abaca fiber-reinforced composites
Cai, M., Takagi, H., Nakagaito, A. N., Li, Y., & Waterhouse, G. I. N. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.025 · Cited by 414
Chemical Composition of Natural Fibers and its Influence on their Mechanical Properties
Komuraiah, A., Kumar, N. S., & Prasad, B. D. (2014) · Mechanics of Composite Materials · doi:10.1007/s11029-014-9422-2 · Cited by 399
Micro- and Nanocellulose in Polymer Composite Materials: A Review
Omran, A. A. B., Mohammed, A. A. B. A., Sapuan, S. M., Ilyas, R. A., Asyraf, M. R. M., Rahimian Koloor, S. S., & Petrů, M. (2021) · Polymers · doi:10.3390/polym13020231 · Cited by 398
Self-citationA Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Self-citationHOSSEINI, M. H., RAZAVI, S. H., & MOUSAVI, M. A. (2009) · Journal of Food Processing and Preservation · doi:10.1111/j.1745-4549.2008.00307.x · Cited by 396
Freeze-Casting Produces a Graphene Oxide Aerogel with a Radial and Centrosymmetric Structure
Wang, C., Chen, X., Wang, B., Huang, M., Wang, B., Jiang, Y., & Ruoff, R. S. (2018) · ACS Nano · doi:10.1021/acsnano.8b01747 · Cited by 392
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
Self-citationLee, C. H., Abdan, K., & Lee, S. H. (2021) · Polymers · doi:10.3390/polym13030438 · Cited by 345
Physical properties of chitosan films incorporated with natural antioxidants
Souza, V. G. L., Fernando, A. L., Pires, J. R. A., Rodrigues, P. F., Lopes, A. A. S., & Fernandes, F. M. B. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.04.056 · Cited by 344
Noshirvani, N., Ghanbarzadeh, B., Gardrat, C., Rezaei, M. R., Hashemi, M., Le Coz, C., & Coma, V. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.03.015 · Cited by 343
Retting process of some bast plant fibers and its effect on fibre quality: A review
Md. Tahir, P., Ahmed, A. B., SaifulAzry, S. O. A., & Ahmed, Z. (2011) · BioResources · doi:10.15376/biores.6.4.5260-5281 · Cited by 340
Zhang, X., Ismail, B. B., Cheng, H., Jin, T. Z., Qian, M., Arabi, S. A., Liu, D., & Guo, M. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118616 · Cited by 303
Zhou, Y., Fu, S., Zhang, L., Zhan, H., & Levit, M. V. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.08.055 · Cited by 300
Polyelectrolyte multilayered assemblies in biomedical technologies
Costa, R. R., & Mano, J. F. (2014) · Chemical Society Reviews · doi:10.1039/c3cs60393h · Cited by 296
Citrus essential oils: Extraction, authentication and application in food preservation
Mahato, N., Sharma, K., Koteswararao, R., Sinha, M., Baral, E., & Cho, M. H. (2019) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2017.1384716 · Cited by 294
Liu, Z., Wang, H., Liu, C., Jiang, Y., Yu, G., Mu, X., & Wang, X. (2012) · Chemical Communications · doi:10.1039/c2cc17795a · Cited by 291
Alsubari, S., Zuhri, M. Y. M., Sapuan, S. M., Ishak, M. R., Ilyas, R. A., & Asyraf, M. R. M. (2021) · Polymers · doi:10.3390/polym13030423 · Cited by 290
Self-citationSharma, S., Sudhakara, P., Singh, J., Ilyas, R. A., Asyraf, M. R. M., & Razman, M. R. (2021) · Polymers · doi:10.3390/polym13162623 · Cited by 288
Self-citationWu, Y.-B., Yu, S.-H., Mi, F.-L., Wu, C.-W., Shyu, S.-S., Peng, C.-K., & Chao, A.-C. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.05.013 · Cited by 269
Ilyas, R., Zuhri, M., Norrrahim, M., Misenan, M., Jenol, M., Samsudin, S., Nurazzi, N., Asyraf, M., Supian, A., Bangar, S., et al. (2022) · Polymers · doi:10.3390/polym14010182 · Cited by 268
Self-citationA Comprehensive Review on Advanced Sustainable Woven Natural Fibre Polymer Composites
Aisyah, H. A., Paridah, M. T., Sapuan, S. M., Ilyas, R. A., Khalina, A., Nurazzi, N. M., Lee, S. H., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13030471 · Cited by 263
Self-citationA review on mechanical behavior of natural fiber reinforced polymer composites and its applications
Jariwala, H., & Jain, P. (2019) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684419828524 · Cited by 258
Xue, Y., Mou, Z., & Xiao, H. (2017) · Nanoscale · doi:10.1039/c7nr04994c · Cited by 251
Comprehensive review on plant fiber-reinforced polymeric biocomposites
Mahmud, S., Hasan, K. M. F., Jahid, M. A., Mohiuddin, K., Zhang, R., & Zhu, J. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-05774-9 · Cited by 245
Lopattananon, N., Panawarangkul, K., Sahakaro, K., & Ellis, B. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24584 · Cited by 242
Natural Fiber Reinforced Composite Material for Product Design: A Short Review
Azman, M. A., Asyraf, M. R. M., Khalina, A., Petrů, M., Ruzaidi, C. M., Sapuan, S. M., Wan Nik, W. B., Ishak, M. R., Ilyas, R. A., & Suriani, M. J. (2021) · Polymers · doi:10.3390/polym13121917 · Cited by 233
Self-citationEffect of chitosan on a periodontal pathogen Porphyromonas gingivalis
İkinci, G., Şenel, S., Akıncıbay, H., Kaş, S., Erciş, S., Wilson, C. G., & Hıncal, A. A. (2002) · International Journal of Pharmaceutics · doi:10.1016/s0378-5173(01)00974-7 · Cited by 231
Kakaei, S., & Shahbazi, Y. (2016) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2016.05.021 · Cited by 228
Influence of grape pomace extract incorporation on chitosan films properties
Ferreira, A. S., Nunes, C., Castro, A., Ferreira, P., & Coimbra, M. A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.07.032 · Cited by 210
Variability of mechanical properties of flax fibres for composite reinforcement. A review
Baley, C., Gomina, M., Breard, J., Bourmaud, A., & Davies, P. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2019.111984 · Cited by 210
Effect of ultrasonication duration of polyvinyl alcohol (PVA) gel on characterizations of PVA film
Abral, H., Atmajaya, A., Mahardika, M., Hafizulhaq, F., Kadriadi, Handayani, D., Sapuan, S. M., & Ilyas, R. A. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.12.078 · Cited by 209
Self-citationUnprecedented Chitin and Chitosan: A Chemical Overview
Yeul, V. S., & Rayalu, S. S. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0458-x · Cited by 201
Shoueir, K. R., El-Desouky, N., Rashad, M. M., Ahmed, M. K., Janowska, I., & El-Kemary, M. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.072 · Cited by 198
Pilehvar-Soltanahmadi, Y., Dadashpour, M., Mohajeri, A., Fattahi, A., Sheervalilou, R., & Zarghami, N. (2018) · Mini-Reviews in Medicinal Chemistry · doi:10.2174/1389557517666170308112147 · Cited by 196
A kinetic study of the thermal degradation of chitosan and a mercaptan derivative of chitosan
Peniche-Covas, C., Argüelles-Monal, W. M., & Román, J. S. (1993) · Polymer Degradation and Stability · doi:10.1016/0141-3910(93)90120-8 · Cited by 191
Mechanical properties of oil palm fibre-reinforced polymer composites: a review
Asyraf, M. R. M., Ishak, M. R., Syamsir, A., Nurazzi, N. M., Sabaruddin, F. A., Shazleen, S. S., Norrrahim, M. N. F., Rafidah, M., Ilyas, R. A., Rashid, M. Z. A., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.12.122 · Cited by 191
Self-citationEffects of processing on the properties of chitosan/cellulose nanocrystal films
Celebi, H., & Kurt, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.07.007 · Cited by 186
Luo, Q., Wang, Y., Han, Q., Ji, L., Zhang, H., Fei, Z., & Wang, Y. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.030 · Cited by 185
Rodrigues, C., de Mello, J. M. M., Dalcanton, F., Macuvele, D. L. P., Padoin, N., Fiori, M. A., Soares, C., & Riella, H. G. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01678-y · Cited by 179
Avelelas, F., Horta, A., Pinto, L. F. V., Cotrim Marques, S., Marques Nunes, P., Pedrosa, R., & Leandro, S. M. (2019) · Marine Drugs · doi:10.3390/md17040239 · Cited by 176
Cellulose Nanocrystal Reinforced Chitosan Based UV Barrier Composite Films for Sustainable Packaging
Yadav, M., Behera, K., Chang, Y.-H., & Chiu, F.-C. (2020) · Polymers · doi:10.3390/polym12010202 · Cited by 175
Innovative thermoplastic chitosan obtained by thermo-mechanical mixing with polyol plasticizers
Matet, M., Heuzey, M.-C., Pollet, E., Ajji, A., & Avérous, L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.052 · Cited by 172
Conversion of Chitin to Defined Chitosan Oligomers: Current Status and Future Prospects
Schmitz, C., González Auza, L., Koberidze, D., Rasche, S., Fischer, R., & Bortesi, L. (2019) · Marine Drugs · doi:10.3390/md17080452 · Cited by 172
Sapuan, S. M., Aulia, H. S., Ilyas, R. A., Atiqah, A., Dele-Afolabi, T. T., Nurazzi, M. N., Supian, A. B. M., & Atikah, M. S. N. (2020) · Polymers · doi:10.3390/polym12102211 · Cited by 172
Self-citationArabpoor, B., Yousefi, S., Weisany, W., & Ghasemlou, M. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106394 · Cited by 172
Polymer Composites Filled with Metal Derivatives: A Review of Flame Retardants
Ilyas, R. A., Sapuan, S. M., Asyraf, M. R. M., Dayana, D. A. Z. N., Amelia, J. J. N., Rani, M. S. A., Norrrahim, M. N. F., Norizan, M. N., Aisyah, H. A., Sharma, S. K., et al. (2021) · Polymers · doi:10.3390/polym13111701 · Cited by 171
Self-citationGraphene Oxide–Chitosan Composite Material for Treatment of a Model Dye Effluent
Sabzevari, M., Cree, D. E., & Wilson, L. D. (2018) · ACS Omega · doi:10.1021/acsomega.8b01871 · Cited by 168
Ahmed, J., Mulla, M., Arfat, Y. A., & Thai T, L. A. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.05.013 · Cited by 167
Xing, Y., Xu, Q., Li, X., Chen, C., Ma, L., Li, S., Che, Z., & Lin, H. (2016) · International Journal of Polymer Science · doi:10.1155/2016/4851730 · Cited by 166
Mohammadi, A., Hashemi, M., & Hosseini, S. M. (2016) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2015.10.015 · Cited by 162
Riaz, A., Aadil, R. M., Abdou, M. A., Bashari, M., Abid, M., & Hashim, M. M. (2020) · Journal of Food Processing and Preservation · doi:10.1111/jfpp.15018 · Cited by 162
Recent Advances in the Development of Fire-Resistant Biocomposites—A Review
Madyaratri, E. W., Ridho, M. A. R., Aristri, M. A., Lubis, M. A. R., Iswanto, A. H., Nawawi, D. S., Antov, P., Krišťák, Ľ., Majlingová, A., & Fatrıasarı, W. (2022) · Polymers · doi:10.3390/polym14030362 · Cited by 160
Mechanical properties of natural fibre polymer composites
Sinha, A. K., Narang, H. K., & Bhattacharya, S. (2017) · Journal of Polymer Engineering · doi:10.1515/polyeng-2016-0362 · Cited by 154
Asyraf, M. R. M., Rafidah, M., Azrina, A., & Razman, M. R. (2021) · Cellulose · doi:10.1007/s10570-021-03710-3 · Cited by 154
Self-citationThermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
Aisyah, H. A., Tahir, P. M., Sapuan, S. M., Abdan, K., Berkalp, Ö. B., Lee, S. H., Lee, C. H., Norizan, M. N., Ramli, N., Wahab, M. S., et al. (2019) · International Journal of Polymer Science · doi:10.1155/2019/5258621 · Cited by 153
Self-citationAmor, G., Sabbah, M., Caputo, L., Idbella, M., Feo, V. D., Porta, R., Fechtali, T., & Mauriello, G. (2021) · Foods · doi:10.3390/foods10010121 · Cited by 152
Moreira, M. D. R., Roura, S. I., & Ponce, A. G. (2011) · LWT · doi:10.1016/j.lwt.2011.04.009 · Cited by 151
Mechanical and physical performance of date palm/bamboo fibre reinforced epoxy hybrid composites
Bakar, M. S. A., Jawaid, M., Rashid, B., Fouad, H., Saba, N., Dhakal, H. N., & Khiari, R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.08.115 · Cited by 145
Biocomposite films prepared from ionic liquid solutions of chitosan and cellulose
Stefanescu, C., Daly, W. H., & Negulescu, I. I. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.003 · Cited by 143
Jamal, T., Sapuan, S. M., Khalina, A., Sherwani, S. F. K., Yusuf, J., & Ilyas, R. A. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.05.047 · Cited by 143
Self-citationKadier, A., Ilyas, R. A., Huzaifah, M. R. M., Harihastuti, N., Sapuan, S. M., Harussani, M. M., Azlin, M. N. M., Yuliasni, R., Ibrahim, R., Atikah, M. S. N., et al. (2021) · Polymers · doi:10.3390/polym13193365 · Cited by 140
Self-citationChakraborty, S., Kundu, S. P., Roy, A., Basak, R. K., Adhikari, B., & Majumder, S. B. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.09.067 · Cited by 140
Roy, S., & Singha, N. R. (2017) · Membranes · doi:10.3390/membranes7030053 · Cited by 139
Rozilah, A., Jaafar, C. N. A., Sapuan, S. M., Zainol, I., & Ilyas, R. A. (2020) · Polymers · doi:10.3390/polym12112605 · Cited by 137
Self-citationBiopolymers and Biocomposites: Chemistry and Technology
Ilyas, R. A., & Sapuan, S. M. (2020) · Current Analytical Chemistry · doi:10.2174/157341101605200603095311 · Cited by 129
Self-citationPreparation and sorption activity of chitosan/cellulose blend beads
Twu, Y.-K., Huang, H.-I., Chang, S.-Y., & Wang, S. (2003) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2003.03.001 · Cited by 127
Sadeghianmaryan, A., Naghieh, S., Sardroud, H. A., Yazdanpanah, Z., Soltani, Y. A., Sernaglia, J., & Chen, D. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.180 · Cited by 126
Alias, A. H., Norizan, M. N., Sabaruddin, F. A., Asyraf, M. R. M., Norrrahim, M. N. F., Ilyas, R. A., Kuzmin, A. M., Rayung, M., Shazleen, S. S., Nazrin, A., et al. (2021) · Coatings · doi:10.3390/coatings11111355 · Cited by 125
Self-citationPourshahrestani, S., Zeimaran, E., Kadri, N. A., Gargiulo, N., Jindal, H. M., Naveen, S. V., Sekaran, S. D., Kamarul, T., & Towler, M. R. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07769 · Cited by 124
Asyraf, M. R. M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., Rafidah, M., & Razman, M. R. (2020) · International Journal of Polymer Science · doi:10.1155/2020/8878300 · Cited by 124
Self-citationSari, N. H., Pruncu, C. I., Sapuan, S. M., Ilyas, R. A., Catur, A. D., Suteja, S., Sutaryono, Y. A., & Pullen, G. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106751 · Cited by 119
Self-citationGrząbka‐Zasadzińska, A., Amietszajew, T., & Borysiak, S. (2017) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-017-6295-3 · Cited by 117
Yu, S.-H., Hsieh, H., Pang, J.-C., Tang, D.-W., Shih, C.-M., Tsai, M., Tsai, Y.-C., & Mi, F. (2012) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2012.11.036 · Cited by 116
Processing and antibacterial properties of chitosan-coated alginate fibers
Dumont, M., Villet, R. A., Guirand, M., Montembault, A., Delair, T., Lack, S., Barikosky, M., Crépet, A., Alcouffe, P., Laurent, F. J., et al. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.11.088 · Cited by 115
Asrofi, M., Sapuan, S. M., Ilyas, R. A., & Ramesh, M. (2020) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.07.254 · Cited by 115
Self-citationHarkins, A. L., Duri, S., Kloth, L. C., & Tran, C. D. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33103 · Cited by 110
Asyraf, M. R. M., Rafidah, M., Ishak, M. R., Sapuan, S. M., Yidris, N., Ilyas, R. A., & Razman, M. R. (2020) · Polymer Composites · doi:10.1002/pc.25587 · Cited by 109
Self-citationBalti, R., Mansour, M. B., Sayari, N., Yacoubi, L., Rabaoui, L. J., Brodu, N., & Massé, A. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.07.046 · Cited by 106
Critical Determinants of Household Electricity Consumption in a Rapidly Growing City
Ali, S. S. S., Razman, M. R., Awang, A., Asyraf, M. R. M., Ishak, M. R., Ilyas, R. A., & Lawrence, R. J. (2021) · Sustainability · doi:10.3390/su13084441 · Cited by 106
Self-citationAzizi, S., Ahmad, M. B., Hussein, M. Z., Ibrahim, N. A., & Namvar, F. (2014) · International Journal of Nanomedicine · doi:10.2147/ijn.s60274 · Cited by 102
Guo, Y., Guan, J., Yang, J., Wang, Y., Zhang, C., & Ke, Q. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00175g · Cited by 98
Asyraf, M. R. M., Ishak, M. R., Norrrahim, M. N. F., Nurazzi, N. M., Shazleen, S. S., Ilyas, R. A., Rafidah, M., & Razman, M. R. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.221 · Cited by 93
Self-citationArumugam, S., Kandasamy, J., Shah, A. U. M., Sultan, M. T. H., Safri, S. N. A., Majid, M. S. A., Basri, A. A., & Mustapha, F. B. (2020) · Polymers · doi:10.3390/polym12071501 · Cited by 90
Zakaria, Z., Islam, M. S., Hassan, A., Mohamad Haafiz, M. K., Arjmandi, R., Inuwa, I. M., & Hasan, M. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/629092 · Cited by 89
Chitosan nanocomposites based on distinct inorganic fillers for biomedical applications
Moura, D., Mano, J. F., Paiva, M. C., & Alves, N. M. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1229104 · Cited by 85
Pourhaghgouy, M., Zamanian, A., Shahrezaee, M., & Masouleh, M. P. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.065 · Cited by 84
Abou‐Zeid, N. Y., Waly, A. I., Kandile, N. G., Rushdy, A. A., El-Sheikh, M. A., & Ibrahim, H. M. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.11.026 · Cited by 84
Quality attributes of map packaged ready-to-eat baby carrots by using chitosan-based coatings
Leceta, I., Molinaro, S., Guerrero, P., Kerry, J. P., & de la Caba, K. (2014) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2014.09.022 · Cited by 84
Deng, X., Gould, M. L., & Ali, M. A. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111696 · Cited by 82
Thakhiew, W., Devahastin, S., & Soponronnarit, S. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.05.020 · Cited by 81
Farhangdoust, S., Zamanian, A., Yasaei, M., & Khorami, M. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.09.013 · Cited by 80
Liaw, B.-S., Chang, T.-T., Chang, H.-K., Liu, W.-K., & Chen, P. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.121082 · Cited by 78
Cobos, M., González, B., Fernández, M. J., & Fernández, M. D. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.129 · Cited by 77
Taheri, A., Behnamian, M., Dezhsetan, S., & Karimirad, R. (2020) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2020.111313 · Cited by 77
Norizan, M. N., Shazleen, S. S., Aisyah, H. A., Asyraf, M. R. M., Sabaruddin, F. A., Mohidem, N. A., Norrrahim, M. N. F., Kamarudin, S. H., Ilyas, R. A., Ishak, M. R., et al. (2021) · Functional Composites and Structures · doi:10.1088/2631-6331/ac351b · Cited by 76
Self-citationJi, Q. X., Zhong, D. Y., Lü, R., Zhang, W. Q., Deng, J., & Chen, X. G. (2009) · Carbohydrate Research · doi:10.1016/j.carres.2009.05.014 · Cited by 75
Liu, F., Chang, W. S., Chen, M., Xu, F., Ma, J., & Zhong, F. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.02.019 · Cited by 70
Sakulwech, S., Lourith, N., Ruktanonchai, U., & Kanlayavattanakul, M. (2018) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2018.05.006 · Cited by 69
Liu, X., Chen, C., Xu, H., Zhang, Y., Zhong, L. X., Hu, N., Jia, X., Wang, Y., Zhong, K., Liu, C., et al. (2021) · Regenerative Biomaterials · doi:10.1093/rb/rbab047 · Cited by 66
Cleymand, F., Poerio, A., Mamanov, A., Elkhoury, K., Ikhelf, L., Jehl, J.-P., Kahn, C. J. F., Ponçot, M., Arab‐Tehrany, E., & Mano, J. F. (2020) · Bioprinting · doi:10.1016/j.bprint.2020.e00122 · Cited by 59
Skin cancer treatment by albumin/5-Fu loaded magnetic nanocomposite spheres in a mouse model
Misak, H. E., Zacharias, N., Song, Z., et al. (2013) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2013.01.003 · Cited by 58
Wang, D., Dong, Y., Chen, X., Liu, Y., Wang, J., Wang, X., Wang, C., & Song, H. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.220 · Cited by 58
Amir, A. L., Ishak, M. R., Yidris, N., Zuhri, M. Y. M., & Asyraf, M. R. M. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.05.040 · Cited by 55
Self-citationDelavar, Z. F., & Shojaei, A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.03.048 · Cited by 54
Brás, T., Rosa, D., Gonçalves, A. C., Gomes, A. C., Alves, V. D., Crespo, J. G., Duarte, M. F., & Neves, L. A. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.09.109 · Cited by 51
Valencia‐Sullca, C., Atarés, L., Vargas, M., & Chiralt, A. (2018) · Food and Bioprocess Technology · doi:10.1007/s11947-018-2094-5 · Cited by 49
Tran, C. D., Duri, S., & Harkins, A. L. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34520 · Cited by 48
Hazrol, M. D., Sapuan, S. M., Ilyas, R. A., Othman, M. L., & Sherwani, S. F. K. (2020) · Polimery · doi:10.14314/polimery.2020.5.4 · Cited by 47
Self-citationGenipin crosslinked ethyl cellulose–chitosan complex microspheres for anti-tuberculosis delivery
Feng, H., Zhang, L., & Zhu, C. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.11.007 · Cited by 46
Preparation and evaluation of squid ink polysaccharide-chitosan as a wound-healing sponge
Huang, N., Lin, J., Li, S., Deng, Y., Kong, S., Hong, P., Yang, P., Liao, M., & Hu, Z. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.08.068 · Cited by 44
Moghadas, B., Solouk, A., & Sadeghi, D. (2020) · Polymer Bulletin · doi:10.1007/s00289-020-03352-8 · Cited by 43
Characterization of chitosan composites with synthetic polymers and inorganic additives
Lewandowska, K. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.08.003 · Cited by 41
Trigueiro, J. P. C., Silva, G. G., Pereira, F. V., & Lavall, R. L. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.07.001 · Cited by 41
de Azevedo, E. P., Retarekar, R., Raghavan, M. L., & Kumar, V. (2012) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2012.690273 · Cited by 41
Thermal and mechanical properties of chitosan reinforced polyhydroxybutyrate composites
Rajan, R., Sreekumar, P. A., Joseph, K., & Skrifvars, M. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35341 · Cited by 40
Optimized synthesis of O-carboxymethyl-N,N,N-trimethyl chitosan
Patrulea, V., Applegate, L. A., Ostafe, V., Jordan, O., & Borchard, G. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.014 · Cited by 39
Preparation of Chitosan-Based Hemostatic Sponges by Supercritical Fluid Technology
Song, H.-F., Chen, A., Wang, S., Kang, Y., Ye, S.-F., Liu, Y., & Wu, W. (2014) · Materials · doi:10.3390/ma7042459 · Cited by 36
Manufacture and properties of cellulose/O-hydroxyethyl chitosan blend fibers
Xu, X., Zhuang, X., Cheng, B., Xu, J. J., Long, G., & Zhang, H. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.03.011 · Cited by 35
He, J. M., Wu, Y. D., Wang, F. W., Cheng, W., Huang, Y. D., & Fu, B. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-0504-5 · Cited by 35
Rogovina, S. Z., Akopova, T. A., Vikhoreva, G. A., & Gorbacheva, I. N. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00141-0 · Cited by 32
Protein and Polysaccharide-Based Electroactive and Conductive Materials for Biomedical Applications
Hu, X., Ricci, S. L., Naranjo, S., Hill, Z., & Gawason, P. (2021) · Molecules · doi:10.3390/molecules26154499 · Cited by 31
Kaur, P., Sandhu, K. S., Bangar, S. P., Purewal, S. S., Kaur, M., Ilyas, R. A., Asyraf, M. R. M., & Razman, M. R. (2021) · Antioxidants · doi:10.3390/antiox10081214 · Cited by 30
Self-citationA review of chitosan's effect on oral biofilms: Perspectives from the tube to the mouth
Costa, E. M., Silva, S., Veiga, M., Tavaria, F. K., & Pintado, M. (2017) · Journal of Oral Biosciences · doi:10.1016/j.job.2017.07.001 · Cited by 25
Ασσάντη, Ε., Karabagias, V. K., Karabagias, I. K., Badeka, A. V., & Kontominas, M. G. (2021) · Journal of Food Science and Technology · doi:10.1007/s13197-020-04601-4 · Cited by 25
Seon, G. M., Lee, M. H., Kwon, B., Kim, M. S., Koo, M.-A., Seomun, Y., Kim, J.-T., Kim, T. H., & Park, J. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.03.017 · Cited by 23
Chitosan nanofibers fabricated by combined ultrasonic atomization and freeze casting
Wang, Y., & Wakisaka, M. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.080 · Cited by 21
Preparation and Characterization of Chitosan/viscose Rayon Filament Biocomposite
Gorade, V. G., Chaudhary, B. U., Parmaj, O., & Kale, R. D. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1764442 · Cited by 20
Cited by
Ranakoti, L., Gangil, B., Mishra, S. K., Singh, T., Sharma, S., Ilyas, R. A., & El-Khatib, S. (2022) · Materials · doi:10.3390/ma15124312 · Cited by 311
Self-citation
Metadata
- Authors
- Ilyas, R., Aisyah, H., Nordin, A., Ngadi, N., Zuhri, M., Asyraf, M., Sapuan, S., Zainudin, E., Sharma, S., Abral, H., Asrofi, M., Syafri, E., Sari, N., Rafidah, M., Zakaria, S., Razman, M., Majid, N., Ramli, Z., Azmi, A., Bangar, S., & Ibrahim, R.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2022-02-23
- Volume
- 14
- Issue
- 5
- Pages
- 874
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4213445396
- Cited by
- 258
- References
- 169
- FWCI
- 16.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.