The DOI matches its Crossref record; 241 of the 241 references it cites were found in a registry or an index.
Recent Advances in the Investigation of Poly(lactic acid) (PLA) Nanocomposites: Incorporation of Various Nanofillers and their Properties and Applications
Open accessAbstract
Poly(lactic acid) (PLA) is considered the most promising biobased substitute for fossil-derived polymers due to its compostability, biocompatibility, renewability, and good thermomechanical properties. However, PLA suffers from several shortcomings, such as low heat distortion temperature, thermal resistance, and rate of crystallization, whereas some other specific properties, i.e., flame retardancy, anti-UV, antibacterial or barrier properties, antistatic to conductive electrical characteristics, etc., are required by different end-use sectors. The addition of different nanofillers represents an attractive way to develop and enhance the properties of neat PLA. Numerous nanofillers with different architectures and properties have been investigated, with satisfactory achievements, in the design of PLA nanocomposites. This review paper overviews the current advances in the synthetic routes of PLA nanocomposites, the imparted properties of each nano-additive, as well as the numerous applications of PLA nanocomposites in various industrial fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
1 retracted
Rahimzadeh, C. Y., Barzinjy, A. A., Mohammed, A. S., & Hamad, S. M. (2022) · PLoS ONE · doi:10.1371/journal.pone.0268184 · Cited by 135
RetractedProduction, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Antimicrobial effects of silver nanoparticles
Kim, J. S., Kuk, E., Yu, K. N., Kim, J.-H., Park, S. J., Lee, H. J., Kim, S. H., Park, Y. K., Park, Y. H., Hwang, C.-Y., et al. (2007) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2006.12.001 · Cited by 4,918
Recent advances in ZnO materials and devices
Look, D. C. (2001) · Materials Science and Engineering: B · doi:10.1016/s0921-5107(00)00604-8 · Cited by 2,831
Singh, J., Dutta, T., Kim, K.-H., Rawat, M., Samddar, P., & Kumar, P. (2018) · Journal of Nanobiotechnology · doi:10.1186/s12951-018-0408-4 · Cited by 2,700
Preparation, modification and environmental application of biochar: A review
Wang, J., & Wang, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.282 · Cited by 2,345
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Weber, K., & Quicker, P. (2018) · Fuel · doi:10.1016/j.fuel.2017.12.054 · Cited by 1,522
Progress in the functional modification of graphene/graphene oxide: a review
Yu, W., Sisi, L., Haiyan, Y., & Jie, L. (2020) · RSC Advances · doi:10.1039/d0ra01068e · Cited by 1,387
Nanocellulose: From Fundamentals to Advanced Applications
Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00392 · Cited by 1,309
Barsoum, M. W. (2019) · CRC Press eBooks · doi:10.1201/9781498708166 · Cited by 1,275
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Photocatalytic disinfection using titanium dioxide: spectrum and mechanism of antimicrobial activity
Foster, H. A., Ditta, I. B., Varghese, S., & Steele, A. (2011) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-011-3213-7 · Cited by 1,164
Biochar in climate change mitigation
Lehmann, J., Cowie, A., Masiello, C. A., Kammann, C., Woolf, D., Amonette, J. E., Cayuela, M. L., Camps-Arbestain, M., & Whitman, T. (2021) · Nature Geoscience · doi:10.1038/s41561-021-00852-8 · Cited by 970
Overview of known plastic packaging-associated chemicals and their hazards
Groh, K. J., Backhaus, T., Carney-Almroth, B., Geueke, B., Inostroza, P. A., Lennquist, A., Leslie, H. A., Maffini, M., Slunge, D., Trasande, L., et al. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.10.015 · Cited by 913
Active Packaging Technologies with an Emphasis on Antimicrobial Packaging and its Applications
Suppakul, P., Miltz, J., Sonneveld, K., & Bigger, S. W. (2003) · Journal of Food Science · doi:10.1111/j.1365-2621.2003.tb05687.x · Cited by 882
Oxidation and Photo-Oxidation of Water on TiO2Surface
Valdés, Á., Qu, Z.-W., Kroes, G.-J., Rossmeisl, J., & Nørskov, J. K. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp711929d · Cited by 750
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Synthesis of hydroxyapatite for biomedical applications
Szcześ, A., Hołysz, L., & Chibowski, E. (2017) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2017.04.007 · Cited by 719
Advanced Nanocellulose‐Based Composites for Flexible Functional Energy Storage Devices
Xu, T., Du, H., Liu, H., Liu, W., Zhang, X., Si, C., Liu, P., & Zhang, K. (2021) · Advanced Materials · doi:10.1002/adma.202101368 · Cited by 696
Proanthocyanidins and hydrolysable tannins: occurrence, dietary intake and pharmacological effects
Smeriglio, A., Barreca, D., Bellocco, E., & Trombetta, D. (2017) · British Journal of Pharmacology · doi:10.1111/bph.13630 · Cited by 688
Synthesis, Characterization, and Spectroscopic Properties of ZnO Nanoparticles
Talam, S., Karumuri, S. R., & Gunnam, N. (2012) · ISRN Nanotechnology · doi:10.5402/2012/372505 · Cited by 681
Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films
Rhim, J.-W., Hong, S.-I., & Ha, C.-S. (2009) · LWT - Food Science and Technology · doi:10.1016/j.lwt.2008.02.015 · Cited by 679
Balla, E., Daniilidis, V., Karlioti, G., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Vlachopoulos, A., Koumentakou, I., & Bikiaris, D. N. (2021) · Polymers · doi:10.3390/polym13111822 · Cited by 655
Self-citationA Mini Review of Antibacterial Properties of ZnO Nanoparticles
Gudkov, S. V., Burmistrov, D. E., Serov, D. A., Rebezov, M. B., Semenova, A. A., & Lisitsyn, A. B. (2021) · Frontiers in Physics · doi:10.3389/fphy.2021.641481 · Cited by 589
Zhang, M., Song, G., Gelardi, D. L., Huang, L., Khan, E., Mašek, O., Parikh, S. J., & Ok, Y. S. (2020) · Water Research · doi:10.1016/j.watres.2020.116303 · Cited by 586
Carbon nanotubes: functionalisation and their application in chemical sensors
Norizan, M. N., Moklis, M. H., Ngah Demon, S. Z., Halim, N. A., Samsuri, A., Mohamad, I. S., Knight, V. F., & Abdullah, N. (2020) · RSC Advances · doi:10.1039/d0ra09438b · Cited by 578
Leung, Y. H., Ng, A. M. C., Xu, X., Shen, Z., Gethings, L. A., Wong, M. T., Chan, C. M. N., Guo, M. Y., Ng, Y. H., Djurišić, A. B., et al. (2014) · Small · doi:10.1002/smll.201302434 · Cited by 566
Nagajyothi, P. C., Cha, S. J., Yang, I. J., Sreekanth, T. V. M., Kim, K. J., & Shin, H. M. (2015) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/j.jphotobiol.2015.02.008 · Cited by 529
Microplastics and nanoplastics in the environment: Macroscopic transport and effects on creatures
Huang, D., Tao, J., Cheng, M., Deng, R., Chen, S., Yin, L., & Li, R. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.124399 · Cited by 494
Fatigue Properties of Highly Oriented Polypropylene Tapes and All-Polypropylene Composites
Barkoula, N.-M., Alcock, B., Cabrera, N. O., & Peijs, T. (2008) · Polymers and Polymer Composites · doi:10.1177/096739110801600203 · Cited by 465
A Review of the Synthesis and Applications of Polymer–Nanoclay Composites
Guo, F., Aryana, S., Han, Y., & Jiao, Y. (2018) · Applied Sciences · doi:10.3390/app8091696 · Cited by 445
Kim, I., Viswanathan, K., Kasi, G., Thanakkasaranee, S., Sadeghi, K., & Seo, J. (2022) · Food Reviews International · doi:10.1080/87559129.2020.1737709 · Cited by 441
Review on tannins: Extraction processes, applications and possibilities
Das, A. K., Islam, M. N., Faruk, M. O., Ashaduzzaman, M., & Dungani, R. (2020) · South African Journal of Botany · doi:10.1016/j.sajb.2020.08.008 · Cited by 432
Li, J.-H., Miao, J., Wu, J.-L., Chen, S.-F., & Zhang, Q.-Q. (2014) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.10.015 · Cited by 373
Nanocellulose in food packaging: A review
Ahankari, S. S., Subhedar, A. R., Bhadauria, S. S., & Dufresne, A. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117479 · Cited by 371
Wang, W., Zhang, B., Li, M., Li, J., Zhang, C., Han, Y., Wang, L., Wang, K., Zhou, C., Liu, L., et al. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109192 · Cited by 369
Pluta, M., Galeski, A., Alexandre, M., Paul, M. ‐., & Dubois, P. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11309 · Cited by 367
Li, M., Mondrinos, M. J., Chen, X., Gandhi, M. R., Ko, F. K., & Lelkes, P. I. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30833 · Cited by 358
Occurrence of microplastics and its pollution in the environment: A review
Jiang, J.-Q. (2018) · Sustainable Production and Consumption · doi:10.1016/j.spc.2017.11.003 · Cited by 344
Yuvakkumar, R., Suresh, J., Nathanael, A. J., Sundrarajan, M., & Hong, S. I. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.04.025 · Cited by 343
Yang, W., Fortunati, E., Bertoglio, F., Owczarek, J. S., Bruni, G., Kozanecki, M., Kenny, J. M., Torre, L., Visai, L., & Puglia, D. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.084 · Cited by 341
Bhagia, S., Bornani, K., Agrawal, R., Satlewal, A., Ďurkovič, J., Lagaňa, R., Bhagia, M., Yoo, C. G., Zhao, X., Kunc, V., et al. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101078 · Cited by 337
Biodegradation rate of biodegradable plastics at molecular level
Chinaglia, S., Tosin, M., & Degli-Innocenti, F. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.12.011 · Cited by 332
Caminero, M. Á., Chacón, J. M., Plaza, E. G., López, P. J. N., Reverte, J. M., & Bécar, J. P. (2019) · Polymers · doi:10.3390/polym11050799 · Cited by 319
Wang, G., Wang, L., Mark, L. H., Shaayegan, V., Wang, G., Li, H., Zhao, G., & Park, C. B. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14111 · Cited by 315
Tannins: Prospectives and Actual Industrial Applications
Pizzi, A. (2019) · Biomolecules · doi:10.3390/biom9080344 · Cited by 300
Liu, G., Zheng, H., Jiang, Z., Zhao, J., Wang, Z., Pan, B., & Xing, B. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01481 · Cited by 295
The production and properties of polylactide composites filled with expanded graphite
Murariu, M., Dechief, A. L., Bonnaud, L., Paint, Y., Gallos, A., Fontaine, G., Bourbigot, S., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.12.019 · Cited by 286
Vlachopoulos, A., Karlioti, G., Balla, E., Daniilidis, V., Kalamas, T., Stefanidou, M., Bikiaris, N. D., Christodoulou, E., Koumentakou, I., Karavas, E., et al. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14020359 · Cited by 277
Self-citationArya, S., Mahajan, P., Mahajan, S., Khosla, A., Datt, R., Gupta, V., Young, S.-J., & Oruganti, S. K. (2021) · ECS Journal of Solid State Science and Technology · doi:10.1149/2162-8777/abe095 · Cited by 275
Mechanical properties of PLA-graphene filament for FDM 3D printing
Camargo, J. C., Machado, Á. R., Almeida, E. C., & Silva, E. F. M. S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03532-5 · Cited by 270
Dash, K. K., Ali, N. A., Das, D., & Mohanta, D. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.07.193 · Cited by 269
Du, M., Chen, J., Liu, K., Xing, H., & Song, C. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.108790 · Cited by 268
Nano-magnesium oxide reinforced polylactic acid biofilms for food packaging applications
Swaroop, C., & Shukla, M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.156 · Cited by 265
Role of Polymer Structures in Catalysis by Transition Metal and Metal Oxide Nanoparticle Composites
Shifrina, Z. B., Matveeva, V. G., & Bronstein, L. M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00137 · Cited by 261
Jayaseelan, C., Rahuman, A. A., Roopan, S. M., Kirthi, A. V., Venkatesan, J., Kim, S.-K., Iyappan, M., & Siva, C. (2013) · Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy · doi:10.1016/j.saa.2012.12.083 · Cited by 253
A green method for production of nanobiochar by ball milling- optimization and characterization
Naghdi, M., Taheran, M., Brar, S. K., Rouissi, T., Verma, M., Surampalli, R. Y., & Valero, J. R. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.084 · Cited by 253
Technological Application of Tannin-Based Extracts
Fraga-Corral, M., García-Oliveira, P., Pereira, A. G., Lourenço-Lopes, C., Jimenez-Lopez, C., Prieto, M. A., & Simal-Gandara, J. (2020) · Molecules · doi:10.3390/molecules25030614 · Cited by 249
Thermal degradation of polylactic acid (PLA)/polyhydroxybutyrate (PHB) blends: A systematic review
Kervran, M., Vagner, C., Cochez, M., Ponçot, M., Saeb, M. R., & Vahabi, H. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109995 · Cited by 239
Ivanov, E., Kotsilkova, R., Xia, H., Chen, Y., Donato, R. K., Donato, K., Godoy, A. P., Di Maio, R., Silvestre, C., Cimmino, S., et al. (2019) · Applied Sciences · doi:10.3390/app9061209 · Cited by 233
Shi, Q., Zhou, C., Yue, Y., Guo, W., Wu, Y., & Wu, Q. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.042 · Cited by 229
Stability analysis for multi-jets electrospinning process modified with a cylindrical electrode
Kim, G., Cho, Y.-S., & Kim, W. D. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.01.026 · Cited by 225
Najafi, N., Heuzey, M. C., & Carreau, P. J. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.01.005 · Cited by 223
Alam, F., Shukla, V. R., Varadarajan, K. M., & Kumar, S. (2020) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2019.103576 · Cited by 212
Lingaraju, K., Raja Naika, H., Manjunath, K., Basavaraj, R. B., Nagabhushana, H., Nagaraju, G., & Suresh, D. (2016) · Applied Nanoscience · doi:10.1007/s13204-015-0487-6 · Cited by 206
PLA nanocomposites: Effect of filler type on non-isothermal crystallization
Papageorgiou, G. Z., Achilias, D. S., Nanaki, S., Beslikas, T., & Bikiaris, D. (2010) · Thermochimica Acta · doi:10.1016/j.tca.2010.08.004 · Cited by 204
Self-citationAinali, N. M., Kalaronis, D., Evgenidou, E., Kyzas, G. Z., Bobori, D. C., Kaloyianni, M., Yang, X., Bikiaris, D. N., & Lambropoulou, D. A. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155014 · Cited by 204
Mondal, S., Nguyen, T. P., Pham, V. H., Hoang, G., Manivasagan, P., Kim, M. H., Nam, S. Y., & Oh, J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2019.10.057 · Cited by 202
Yang, W., Fortunati, E., Dominici, F., Kenny, J. M., & Puglia, D. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.07.051 · Cited by 200
Lian, F., Yu, W., Zhou, Q., Gu, S., Wang, Z., & Xing, B. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c02227 · Cited by 198
Carbon Nanotube-Based Chemiresistive Sensors
Tang, R., Shi, Y., Hou, Z., & Wei, L. (2017) · Sensors · doi:10.3390/s17040882 · Cited by 196
Biochar composites: Emerging trends, field successes and sustainability implications
Wang, L., Ok, Y. S., Tsang, D. C. W., Alessi, D. S., Rinklebe, J., Mašek, O., Bolan, N. S., & Hou, D. (2022) · Soil Use and Management · doi:10.1111/sum.12731 · Cited by 195
Control of Biodegradability of Polylactide via Nanocomposite Technology
Ray, S. S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200390013 · Cited by 189
Sharma, D., Sabela, M. I., Kanchi, S., Mdluli, P. S., Singh, G., Stenström, T. A., & Bisetty, K. (2016) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/j.jphotobiol.2016.06.043 · Cited by 182
Yang, L., Li, S., Zhou, X., Liu, J., Li, Y., Yang, M., Yuan, Q., & Zhang, W. (2019) · Synthetic Metals · doi:10.1016/j.synthmet.2019.05.008 · Cited by 179
Kian, L. K., Saba, N., Jawaid, M., & Sultan, M. T. H. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.040 · Cited by 174
Nassar, M. Y., Mohamed, T. Y., Ahmed, I. S., & Samir, I. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2016.10.135 · Cited by 163
Bustillos, J., Montero, D., Nautiyal, P., Loganathan, A., Boesl, B., & Agarwal, A. (2018) · Polymer Composites · doi:10.1002/pc.24422 · Cited by 160
Luo, Y., Lin, Z., & Guo, G. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-2891-4 · Cited by 159
Papon, E. A., & Haque, A. (2018) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684417750477 · Cited by 154
Renu, S., Rizwana, K., Shivashangari, K. S., & Ravikumar, V. (2014) · Applied Nanoscience · doi:10.1007/s13204-014-0369-3 · Cited by 153
Arshad, A. N., Wahid, M. H. M., RUSOP, M., Majid, W. H. A., Subban, R. Y., & Dahan, R. M. (2019) · Journal of Nanomaterials · doi:10.1155/2019/5961563 · Cited by 142
Polylactic Acid Based Nanocomposites: Promising Safe and Biodegradable Materials in Biomedical Field
Sha, L., Chen, Z., Chen, Z., Zhang, A., & Yang, Z. (2016) · International Journal of Polymer Science · doi:10.1155/2016/6869154 · Cited by 141
Chong, W. J., Shen, S., Li, Y., Trinchi, A., Simunec, D. P., Kyratzis, I. L., Sola, A., & Wen, C. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.09.039 · Cited by 138
Mechanical Properties of Nanoclay and Nanoclay Reinforced Polymers: A Review
Rafiee, R., & Shahzadi, R. (2018) · Polymer Composites · doi:10.1002/pc.24725 · Cited by 135
Das, B., Moumita, S., Ghosh, S., Khan, M. I., Indira, D., Jayabalan, R., Tripathy, S. K., Mishra, A., & Balasubramanian, P. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.05.059 · Cited by 132
A facile approach to covalently functionalized carbon nanotubes with biocompatible polymer
Song, W., Zheng, Z., Tang, W., & Wang, X. (2007) · Polymer · doi:10.1016/j.polymer.2007.04.071 · Cited by 131
Cavallo, E., He, X., Luzi, F., Dominici, F., Cerrutti, P., Bernal, C., Foresti, M. L., Torre, L., & Puglia, D. (2020) · Molecules · doi:10.3390/molecules26010126 · Cited by 126
Polylactic acid based biocomposite films reinforced with silanized nanocrystalline cellulose
Jin, K., Tang, Y., Zhu, X., & Zhou, Y. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.06.201 · Cited by 125
Recent progress in graphene based polymer nanocomposites
Lawal, A. T. (2020) · Cogent Chemistry · doi:10.1080/23312009.2020.1833476 · Cited by 125
Nanoclay Reinforced Polymer Composites
Jawaid, M., Qaiss, A. E. K., & Bouhfid, R. (2016) · Engineering materials · doi:10.1007/978-981-10-0950-1 · Cited by 123
Development of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)
Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F. (2017) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705717734600 · Cited by 123
Graphene and its application in thermoplastic polymers as nano-filler- A review
Trivedi, D. N., & Rachchh, N. V. (2021) · Polymer · doi:10.1016/j.polymer.2021.124486 · Cited by 123
Liu, C., Wong, H., Yeung, K., & Tjong, S. C. (2016) · Polymers · doi:10.3390/polym8080287 · Cited by 120
Bobori, D., Dimitriadi, A., Feidantsis, K. G., Samiotaki, A., Fafouti, D., Sampsonidis, I., Kalogiannis, S., Kastrinaki, G., Lambropoulou, D. A., Kyzas, G. Z., et al. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.154603 · Cited by 118
Feng, S., Zhang, F., Ahmed, S., & Liu, Y. (2019) · Coatings · doi:10.3390/coatings9080525 · Cited by 117
Gulzar, S., Tagrida, M., Nilsuwan, K., Prodpran, T., & Benjakul, S. (2022) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2022.107916 · Cited by 117
Karunarathna, M. S., & Smith, R. C. (2020) · Sustainability · doi:10.3390/su12020734 · Cited by 116
Zhang, R., Lan, W., Ji, T., Sameen, D. E., Ahmed, S., Qin, W., & Liu, Y. (2020) · LWT · doi:10.1016/j.lwt.2020.110072 · Cited by 116
Reprocessing of PLA/Graphene Nanoplatelets Nanocomposites
Botta, L., Scaffaro, R., Sutera, F., & Mistretta, M. C. (2017) · Polymers · doi:10.3390/polym10010018 · Cited by 112
Graphene modifications in polylactic acid nanocomposites: a review
Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 108
PLA-TiO2 nanocomposites: Thermal, morphological, structural, and humidity sensing properties
Mallick, S., Ahmad, Z., Touati, F., Bhadra, J., Shakoor, A., & Al-Thani, N. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.06.068 · Cited by 107
Vidakis, N., Petousis, M., Kourinou, M., Velidakis, E., Mountakis, N., Fischer-Griffiths, P. E., Grammatikos, S., & Tzounis, L. (2021) · Nanocomposites · doi:10.1080/20550324.2021.2000231 · Cited by 103
An overview of the recent advances in polylactide‐based sustainable nanocomposites
Banerjee, R., & Ray, S. S. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25623 · Cited by 102
Kaloyianni, M. G., Bobori, D., Xanthopoulou, D., Malioufa, G., Sampsonidis, I., Kalogiannis, S., Feidantsis, K. G., Kastrinaki, G., Dimitriadi, A., Koumoundouros, G., et al. (2021) · Toxics · doi:10.3390/toxics9110289 · Cited by 101
Synthesis of Titanium Dioxide Nanoparticles Using Echinacea purpurea Herba.
Dobrucka, R. (2017) · PubMed · Cited by 100
UV-A activated TiO2 embedded biodegradable polymer film for antimicrobial food packaging application
Xie, J., & Hung, Y. (2018) · LWT · doi:10.1016/j.lwt.2018.05.050 · Cited by 100
Development of blown polylactic acid-MgO nanocomposite films for food packaging
Swaroop, C., & Shukla, M. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105482 · Cited by 100
3D printed polylactic acid nanocomposite scaffolds for tissue engineering applications
Alam, F., Varadarajan, K. M., & Kumar, S. (2019) · Polymer Testing · doi:10.1016/j.polymertesting.2019.106203 · Cited by 100
Zare, Y., & Rhee, K. Y. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107132 · Cited by 97
Preparation of nano-biochar from conventional biorefineries for high-value applications
Song, B., Cao, X., Gao, W., Aziz, S., Gao, S., Lam, C.-H., & Lin, R. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.112057 · Cited by 97
González, E. A. S., Olmos, D., Lorente, M. Á., Vélaz, I., & González-Benito, J. (2018) · Polymers · doi:10.3390/polym10121365 · Cited by 96
Yu, M., Sun, C., Xue, Y., Liu, C., Qiu, D., Cui, B., Zhang, Y., Cui, H., & Zeng, Z. (2019) · RSC Advances · doi:10.1039/c9ra05843e · Cited by 95
Anupama, & Khare, P. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.128759 · Cited by 95
Montava-Jordà, S., Chacon, V., Lascano, D., Sánchez‐Nacher, L., & Muñoz, N. M. (2019) · Polymers · doi:10.3390/polym11081314 · Cited by 93
Li, Y., Yin, D., Liu, W., Zhou, H., Zhang, Y., & Wang, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.094 · Cited by 91
Electrospun PLA/MWCNTs composite nanofibers for combined chemo- and photothermal therapy
Zhang, Z., Liu, S., Xiong, H., Jing, X., Xie, Z., Chen, X., & Huang, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.08.003 · Cited by 89
Wang, Z., Pan, Z., Wang, J., & Zhao, R. (2016) · Journal of Nanomaterials · doi:10.1155/2016/6272983 · Cited by 87
Bortoli, L. S. D., Farias, R. D., Mezalira, D. Z., Schabbach, L. M., & Fredel, M. C. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103402 · Cited by 85
Study on the properties of PLA/PBAT composite modified by nanohydroxyapatite
Yan, D., Wang, Z., Guo, Z., Ma, Y., Wang, C., Tan, H., & Zhang, Y. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.08.062 · Cited by 83
Diez-Pascual, A. M. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms221910511 · Cited by 82
Yang, J.-H., Lin, S., & Lee, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm31312j · Cited by 81
Klonos, P. Α., Terzopoulou, Z. N., Koutsoumpis, S., Zidropoulos, S., Kripotou, S., Papageorgiou, G. Z., Bikiaris, D. Ν., Kyritsis, A., & Pissis, P. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.07.002 · Cited by 81
Self-citationLignin Nanoparticles as A Promising Way for Enhancing Lignin Flame Retardant Effect in Polylactide
Chollet, B., Lopez‐Cuesta, J., Laoutid, F., & Ferry, L. (2019) · Materials · doi:10.3390/ma12132132 · Cited by 81
Belgacem, C., Tarrés, Q., Delgado‐Aguilar, M., Mutjé, P., & Boufi, S. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.114287 · Cited by 81
Baek, N., Kim, Y. T., Marcy, J. E., Duncan, S. E., & O’Keefe, S. F. (2018) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2018.05.004 · Cited by 78
Shanmugam, K., Doosthosseini, H., Varanasi, S., Garnier, G., & Batchelor, W. (2019) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2019.e00115 · Cited by 78
Recent Trends and Future Outlooks in the Field of Clay‐Containing Polymer Nanocomposites
Ray, S. S. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400069 · Cited by 77
Papageorgiou, G. Z., Terzopoulou, Z. N., Bikiaris, D. Ν., Triantafyllidis, K. S., Diamanti, E. K., Gournis, D., Klonos, P. Α., Giannoulidis, E., & Pissis, P. (2014) · Thermochimica Acta · doi:10.1016/j.tca.2014.10.007 · Cited by 77
Self-citationPeponi, L., Sessini, V., Arrieta, M. P., Navarro-Baena, I., Sonseca, Á., Dominici, F., Giménez, E., Torre, L., Tercjak, A., López, D., et al. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.02.019 · Cited by 77
Li, L., Chen, Y., Yu, T., Wang, N., Wang, C., & Wang, H. (2019) · Composites Communications · doi:10.1016/j.coco.2019.10.004 · Cited by 77
Sanusi, O. M., Benelfellah, A., Bikiaris, D. Ν., & Hocine, N. A. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5104 · Cited by 77
Ramesh, P., Prasad, B. D., & Narayana, K. L. (2020) · Silicon · doi:10.1007/s12633-020-00401-9 · Cited by 76
Dose-Dependent Cytotoxicity of Polypropylene Microplastics (PP-MPs) in Two Freshwater Fishes
Bobori, D., Feidantsis, K. G., Dimitriadi, A., Datsi, N., Ripis, P., Kalogiannis, S., Sampsonidis, I., Kastrinaki, G., Ainali, N. M., Lambropoulou, D. A., et al. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232213878 · Cited by 75
Ramesh, P., Prasad, B. D., & Narayana, K. L. (2019) · Silicon · doi:10.1007/s12633-019-00275-6 · Cited by 74
Masarra, N.-A., Batistella, M., Quantin, J.-C., Regazzi, A., Pucci, M. F., Hage, R. E., & Lopez‐Cuesta, J. (2022) · Materials · doi:10.3390/ma15030762 · Cited by 73
Zhai, Y., Wang, J., Wang, H., Song, T., Hu, W., & Li, S. (2018) · Molecules · doi:10.3390/molecules23082073 · Cited by 71
92 years of zinc oxide: has been studied by the scientific community since the 1930s- An overview
Sharma, P., Hasan, M. R., Mehto, N. K., Deepak, D., Bishoyi, A., & Narang, J. (2022) · Sensors International · doi:10.1016/j.sintl.2022.100182 · Cited by 71
Ductile PLA nanocomposites with improved thermal stability
Chen, B., Shih, C., & Chen, A. F. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2012.08.007 · Cited by 70
Polylactic Acid (PLA)-Based Nanocomposites: Processing and Properties
Sharif, A., Mondal, S., & Hoque, M. E. (2019) · Springer eBooks · doi:10.1007/978-3-030-05825-8_11 · Cited by 70
Črešnar, K. P., Aulova, A., Bikiaris, D. Ν., Lambropoulou, D. A., Kuzmič, K., & Zemljič, L. F. (2021) · Molecules · doi:10.3390/molecules26144161 · Cited by 70
Effect of electrospinning parameters on the characterization of PLA/HNT nanocomposite fibers
Touny, A. H., Lawrence, J. G., Jones, A. D., & Bhaduri, S. B. (2010) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2010.0122 · Cited by 67
Elavarasan, N., Kokila, K., Inbasekar, G., & Sujatha, V. (2016) · Research on Chemical Intermediates · doi:10.1007/s11164-016-2830-2 · Cited by 67
Iglesias-Montes, M. L., Luzi, F., Dominici, F., Torre, L., Cyras, V. P., Manfredi, L. B., & Puglia, D. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00157 · Cited by 67
García, E., López, P. J. N., Chacón, J. M., Caminero, M. Á., & Kamarthi, S. V. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106860 · Cited by 66
Makri, S. P., Xanthopoulou, E., Klonos, P. Α., Grigoropoulos, A., Kyritsis, A., Tsachouridis, K., Anastasiou, A. D., Deligkiozi, I., Nikolaidis, N., & Bikiaris, D. Ν. (2022) · Polymers · doi:10.3390/polym14235274 · Cited by 66
Stereocomplexed PLA nanocomposites: From in situ polymerization to materials properties
Re, G. L., Benali, S., Habibi, Y., Raquez, J., & Dúbois, P. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.03.004 · Cited by 65
Nanocomposite Fibers Electrospun from Poly(lactic acid)/Cellulose Nanocrystals
Xiang, C., Joo, Y. L., & Frey, M. W. (2009) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2009.1016 · Cited by 63
Cerro, D., Bustos, G. A., Villegas, C., Buendia, N., Truffa, G., Godoy, M. P., Rodríguez, F. J., Rojas, A., Galotto, M. J., Constandil, L., et al. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.11.140 · Cited by 63
Ainali, N. M., Kalaronis, D., Εvgenidou, Ε., Bikiaris, D. Ν., & Lambropoulou, D. A. (2021) · Macromol—A Journal of Macromolecular Research · doi:10.3390/macromol1030015 · Cited by 63
Crystallization Study and Comparative in Vitro–in Vivo Hydrolysis of PLA Reinforcement Ligament
Beslikas, T., Gigis, I., Goulios, V., Christoforides, J. E., Papageorgiou, G. Z., & Bikiaris, D. Ν. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12106597 · Cited by 62
Self-citationThermal Stability and Decomposition Mechanism of PLA Nanocomposites with Kraft Lignin and Tannin
Ainali, N. M., Tarani, E., Zamboulis, A., Črešnar, K. P., Zemljič, L. F., Chrissafis, K., Lambropoulou, D. A., & Bikiaris, D. Ν. (2021) · Polymers · doi:10.3390/polym13162818 · Cited by 61
Paydayesh, A., Mousavi, S. R., Estaji, S., Khonakdar, H. A., & Nozarinya, M. A. (2021) · Polymer Composites · doi:10.1002/pc.26385 · Cited by 61
Influence of the graphite type on the synthesis of polypropylene/graphene nanocomposites
Milani, M. A., Quijada, R., Basso, N. R. D. S., Graebin, A. P., & Galland, G. B. (2012) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26149 · Cited by 58
A Comprehensive Review of the Structure Elucidation of Tannins from Terminalia Linn.
Chang, Z., Zhang, Q., Liang, W., et al. (2019) · Evidence-based Complementary and Alternative Medicine · doi:10.1155/2019/8623909 · Cited by 57
Glass transition and segmental dynamics in poly(l-lactic acid)/graphene oxide nanocomposites
Klonos, P. Α., Kripotou, S., Kyritsis, A., Papageorgiou, G. Z., Bikiaris, D. Ν., Gournis, D., & Pissis, P. (2015) · Thermochimica Acta · doi:10.1016/j.tca.2015.08.020 · Cited by 56
Self-citationCharacterization and 3D printability of poly (lactic acid)/acetylated tannin composites
Liao, J., Brosse, N., Pizzi, A., Hoppe, S., Zhou, X., & Du, G. (2020) · Industrial Crops and Products · doi:10.1016/j.indcrop.2020.112320 · Cited by 56
Magri, A. E., Vanaei, S., Shirinbayan, M., Vaudreuil, S., & Tcharkhtchi, A. (2021) · Polymers · doi:10.3390/polym13193218 · Cited by 56
Polypropylene nanocomposite fibers: A review of current trends and new developments
Tsioptsias, C., Leontiadis, K., Tzimpilis, E., et al. (2020) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087920972146 · Cited by 55
Rahman, M. M., Shahruzzaman, M., Islam, M. S., Khan, M. N., & Haque, P. (2018) · Journal of Polymer Engineering · doi:10.1515/polyeng-2018-0103 · Cited by 52
Petousis, M., Vidakis, N., Mountakis, N., Papadakis, V. M., & Tzounis, L. (2022) · Nanomaterials · doi:10.3390/nano12234292 · Cited by 52
da Silva, A. P., Montagna, L. S., Passador, F. R., Rezende, M. C., & Lemes, A. P. (2021) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2021.79 · Cited by 51
Polymeric flavonoids processed with co-polymers as UV and thermal stabilisers for polyethylene films
Bridson, J. H., Kaur, J., Zhang, Z., Donaldson, L. A., & Fernyhough, A. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.10.002 · Cited by 50
Morsi, M. A., & Hezma, A. M. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.01.017 · Cited by 50
Wang, B., Ye, X., Wang, B., Li, X., Xiao, S., & Liu, H. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109326 · Cited by 50
Study of silane treatment on poly‐lactic acid(PLA)/sepiolite nanocomposite thin films
Moazeni, N., Mohamad, Z., & Dehbari, N. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41428 · Cited by 49
Rasheed, M., Jawaid, M., & Parveez, B. (2021) · Polymers · doi:10.3390/polym13071076 · Cited by 48
Guo, F., Liao, X., Li, S., Yan, Z., Tang, W., & Li, G. (2021) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2021.105344 · Cited by 48
Fu, L., Wu, F., Xu, C., Cao, T.-H., Wang, R., & Guo, S. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b00602 · Cited by 47
Dynamically Cross-Linked Tannin as a Reinforcement of Polypropylene and UV Protection Properties
Liao, J., Brosse, N., Pizzi, A., & Hoppe, S. (2019) · Polymers · doi:10.3390/polym11010102 · Cited by 47
Alikarami, N., Abrisham, M., Huang, X., Panahi‐Sarmad, M., Zhang, K., Dong, K., & Xiao, X. (2022) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2022.2051639 · Cited by 47
Geng, S., Yao, K., Zhou, Q., & Oksman, K. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b01086 · Cited by 46
PLA/MMT and PLA/Halloysite Bio-Nanocomposite Films: Mechanical, Barrier, and Transparency
Othman, S. H., Ling, H. N., Talib, R. A., Naim, M. N., Risyon, N. P., & Saifullah, M. (2019) · Journal of nano research · doi:10.4028/www.scientific.net/jnanor.59.77 · Cited by 46
Pathway-Driven Peptide–Bioglass Nanocomposites as the Dynamic and Self-Healable Matrix
Gupta, N., Singh, A., Dey, N., Chattopadhyay, S., Joseph, J. P., Gupta, D., Ganguli, M., & Pal, A. (2021) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c03757 · Cited by 46
Papadopoulos, L., Klonos, P. Α., Terzopoulou, Z. N., Psochia, E. A., Sanusi, O. M., Hocine, N. A., Benelfellah, A., Giliopoulos, D. J., Triantafyllidis, K. S., Kyritsis, A., et al. (2021) · Polymer · doi:10.1016/j.polymer.2021.123457 · Cited by 46
Enhancement of mechanical properties of PLA/PCL (80/20) blend by reinforcing with MMT nanoclay
Umamaheswara Rao, R., Venkatanarayana, B., & Suman, K. N. S. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.280 · Cited by 45
Demchenko, V. L., Kobylinskyi, S., Iurzhenko, M. V., Riabov, S. V., Vashchuk, A., Rybalchenko, N., Zahorodnia, S., Naumenko, K., Demchenko, O. M., Adamus, G., et al. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.105096 · Cited by 44
Biocompatibility of a new biodegradable polymer-hydroxyapatite composite for biomedical applications
Macha, I. J., Ben‐Nissan, B., Santos, J., Cazalbou, S., Stamboulis, A. G., Grossin, D., & Giordano, G. (2017) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2017.01.008 · Cited by 42
Shazleen, S. S., Ng, L. Y. F., Ibrahim, N. A., Hassan, M. A., & Ariffin, H. (2021) · Polymers · doi:10.3390/polym13193226 · Cited by 42
Klonos, P. Α., Peoglos, V., Bikiaris, D. Ν., & Kyritsis, A. (2020) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b11843 · Cited by 41
Effect of Nano-Clay and Surfactant on the Biodegradation of Poly(Lactic Acid) Films
Mayekar, P. C., Castro‐Aguirre, E., Auras, R. A., Selke, S. E. M., & Narayan, R. (2020) · Polymers · doi:10.3390/polym12020311 · Cited by 40
Shebi, A., & Sreejith, L. (2019) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2019.03.045 · Cited by 39
Li, S., Chen, G., Qiang, S., et al. (2020) · International Journal of Food Microbiology · doi:10.1016/j.ijfoodmicro.2020.108763 · Cited by 39
Bobirică, C., Bobirică, L., Râpă, M., Matei, E., Predescu, A. M., & Orbeci, C. (2020) · Water · doi:10.3390/w12010176 · Cited by 38
Grande‐Tovar, C. D., Castro, J. I., Valencia-Llano, C. H., Tenorio, D. L., Saavedra, M., Zapata, P. A., & Chaur, M. N. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics15010043 · Cited by 38
Bužarovska, A., Dinescu, S., Chiţoiu, L., & Costache, M. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2415-0 · Cited by 37
Sanusi, O. M., Benelfellah, A., Papadopoulos, L., Terzopoulou, Z. N., Bikiaris, D. Ν., & Hocine, N. A. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06378-z · Cited by 37
Rigotti, D., Checchetto, R., Tarter, S., Caretti, D., Rizzuto, M., Fambri, L., & Pegoretti, A. (2019) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2019.75 · Cited by 35
Swetha, S., Balagangadharan, K., Lavanya, K., & Selvamurugan, N. (2021) · Biotechnology Journal · doi:10.1002/biot.202100282 · Cited by 35
Ghassemi, B., Estaji, S., Mousavi, S. R., Mahand, S. N., Shojaei, S., Mostafaiyan, M., Arjmand, M., & Khonakdar, H. A. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-07129-4 · Cited by 35
Effect of bioglass nanoparticles on the properties and bioactivity of poly(lactic acid) films
Canales, D. A., Saavedra, M., Flores, M. T., Bejarano, J., Ortiz, J. A., Orihuela, P. A., Alfaro, A., Pabón, E., Palza, H., & Zapata, P. A. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36963 · Cited by 34
Batool, M., Abid, A., Khurshid, S., Bashir, T., Ismail, M. A., Razaq, M. A., & jamil, M. (2021) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-021-05361-9 · Cited by 34
Jain, S., & Tadesse, Y. T. (2018) · International Journal of Nanoscience · doi:10.1142/s0219581x18500266 · Cited by 33
Nonato, R. C., Mei, L. H. I., Bonse, B. C., Leal, C. V., Levy, C. E., Oliveira, F. A., Delarmelina, C., Duarte, M. C. T., & Morales, A. R. (2022) · Polymer Engineering and Science · doi:10.1002/pen.25913 · Cited by 33
Črešnar, K. P., Zamboulis, A., Bikiaris, D. Ν., Aulova, A., & Zemljič, L. F. (2022) · Polymers · doi:10.3390/polym14081532 · Cited by 33
Improvement Thermomechanical Properties of Polylactic Acid via Titania Nanofillers Reinforcement
Zorah, M., Mustapa, I. R., Daud, N., Nahida, J. H., Sudin, N. A. S., Majhool, A. A., & Mahmoudi, E. (2020) · Journal of Advanced Research in Fluid Mechanics and Thermal Sciences · doi:10.37934/arfmts.70.1.97111 · Cited by 32
Črešnar, K. P., Klonos, P. Α., Zamboulis, A., Terzopoulou, Z. N., Xanthopoulou, E., Papadopoulos, L., Kyritsis, A., Kuzmič, K., Zemljič, L. F., & Bikiaris, D. Ν. (2021) · Thermochimica Acta · doi:10.1016/j.tca.2021.178998 · Cited by 32
Cited by
Polylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications
Islam, M. S., Elahee, G. M. F., Fang, Y., Yu, X. (., Advincula, R. C., & Cao, C. (. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112842 · Cited by 86
Metadata
- Authors
- Bikiaris, N. D., Koumentakou, I., Samiotaki, C., Meimaroglou, D., Varytimidou, D., Karatza, A., Kalantzis, Z., Roussou, M., Bikiaris, R. D., & Papageorgiou, G. Z.
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2023-02-27
- Volume
- 15
- Issue
- 5
- Pages
- 1196
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W4323317569
- Cited by
- 279
- References
- 241
- FWCI
- 20.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.