The DOI matches its Crossref record; 73 of the 73 references it cites were found in a registry or an index.
A Review of Stereolithography: Processes and Systems
Open accessAbstract
Being the earliest form of additive manufacturing, stereolithography (SLA) fabricates 3D objects by selectively solidifying the liquid resin through a photopolymerization reaction. The ability to fabricate objects with high accuracy as well as a wide variety of materials brings much attention to stereolithography. Since its invention in the 1980s, SLA underwent four generations of major technological innovation over the past 40 years. These innovations have thus resulted in a diversified range of stereolithography systems with dramatically improved resolution, throughput, and materials selection for creating complex 3D objects and devices. In this paper, we review the four generations of stereolithography processes, which are scanning, projection, continuous and volumetric stereolithography. For each generation, representative stereolithography system configurations are also discussed in detail. In addition, other derivative technologies, such as scanning–projection, multi-material, and magnetically assisted stereolithography processes, are also included in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Principles of Computerized Tomographic Imaging
Kak, A. C., & Slaney, M. (2001) · doi:10.1137/1.9780898719277 · Cited by 5,809
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Principles of Computerized Tomographic Imaging
Kak, A. C., Slaney, M., & Wang, G. (2002) · Medical Physics · doi:10.1118/1.1455742 · Cited by 1,877
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Volumetric additive manufacturing via tomographic reconstruction
Kelly, B. E., Bhattacharya, I., Heidari, H., Shusteff, M., Spadaccini, C. M., & Taylor, H. K. (2019) · Science · doi:10.1126/science.aau7114 · Cited by 1,025
3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Projection micro-stereolithography using digital micro-mirror dynamic mask
Sun, C., Fang, N., Wu, D. M., & Zhang, X. (2005) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.12.011 · Cited by 880
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Multimaterial magnetically assisted 3D printing of composite materials
Kokkinis, D., Schaffner, M., & Studart, A. R. (2015) · Nature Communications · doi:10.1038/ncomms9643 · Cited by 848
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Relationship between viscoelastic properties and gelation in thermosetting systems
Tung, C. M., & Dynes, P. J. (1982) · Journal of Applied Polymer Science · doi:10.1002/app.1982.070270220 · Cited by 545
3D printing of robotic soft actuators with programmable bioinspired architectures
Schaffner, M., Faber, J. A., Pianegonda, L., Rühs, P. A., Coulter, F., & Studart, A. R. (2018) · Nature Communications · doi:10.1038/s41467-018-03216-w · Cited by 518
Designing bioinspired composite reinforcement architectures via 3D magnetic printing
Martin, J. J., Fiore, B. E., & Erb, R. M. (2015) · Nature Communications · doi:10.1038/ncomms9641 · Cited by 515
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Farsari, M., & Chichkov, B. N. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.131 · Cited by 466
High-resolution tomographic volumetric additive manufacturing
Loterie, D., Delrot, P., & Moser, C. (2020) · Nature Communications · doi:10.1038/s41467-020-14630-4 · Cited by 461
Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface
Walker, D. A., Hedrick, J. L., & Mirkin, C. A. (2019) · Science · doi:10.1126/science.aax1562 · Cited by 459
Micro-stereolithography of polymeric and ceramic microstructures
Zhang, X., Jiang, X. N., & Sun, C. (1999) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(99)00189-2 · Cited by 450
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
One-step volumetric additive manufacturing of complex polymer structures
Shusteff, M., Browar, A. E. M., Kelly, B. E., Henriksson, J., Weisgraber, T. H., Panas, R. M., Fang, N. X., & Spadaccini, C. M. (2017) · Science Advances · doi:10.1126/sciadv.aao5496 · Cited by 375
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Mueller, B. (2012) · Assembly Automation · doi:10.1108/aa.2012.03332baa.010 · Cited by 359
Slicing procedures for layered manufacturing techniques
Dolenc, A., & Mäkelä, I. (1994) · Computer-Aided Design · doi:10.1016/0010-4485(94)90032-9 · Cited by 341
Layerless fabrication with continuous liquid interface production
Janusziewicz, R., Tumbleston, J. R., Quintanilla, A. L., Mecham, S. J., & DeSimone, J. M. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1605271113 · Cited by 332
Yang, Y., Chen, Z., Song, X., Zhang, Z., Zhang, J., Shung, K. K., Zhou, Q., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605750 · Cited by 316
Developments of 3D Printing Microfluidics and Applications in Chemistry and Biology: a Review
He, Y., Wu, Y., Fu, J., Gao, Q., & Qiu, J. (2016) · Electroanalysis · doi:10.1002/elan.201600043 · Cited by 313
Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability
Yang, Y., Li, X., Chu, M., Sun, H., Jin, J., Yu, K., Wang, Q., Zhou, Q., & Chen, Y. (2019) · Science Advances · doi:10.1126/sciadv.aau9490 · Cited by 310
Serbin, J., Ovsianikov, A., & Chichkov, B. (2004) · Optics Express · doi:10.1364/opex.12.005221 · Cited by 305
Multi-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
Lee, K.-W., Wang, S., Fox, B. C., Ritman, E. L., Yaszemski, M. J., & Lu, L. (2007) · Biomacromolecules · doi:10.1021/bm060834v · Cited by 292
3D printing antagonistic systems of artificial muscle using projection stereolithography
Peele, B. N., Wallin, T. J., Zhao, H., & Shepherd, R. F. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/5/055003 · Cited by 265
Rapid, continuous additive manufacturing by volumetric polymerization inhibition patterning
de Beer, M. P., van der Laan, H. L., Cole, M. A., Whelan, R. J., Burns, M. A., & Scott, T. F. (2019) · Science Advances · doi:10.1126/sciadv.aau8723 · Cited by 261
Two-photon absorption cross-sections of common photoinitiators
Schafer, K. J., Hales, J. M., Balu, M., Belfield, K. D., Van Stryland, E. W., & Hagan, D. J. (2004) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(03)00394-0 · Cited by 247
Real three dimensional micro fabrication using stereo lithography and metal molding
Ikuta, K., & Hirowatari, K. (2002) · Proceedings, IEEE micro electro mechanical systems · doi:10.1109/memsys.1993.296949 · Cited by 244
Recent developments in the use of two‐photon polymerization in precise 2D and 3D microfabrications
Lee, K., Yang, D., Park, S. H., & Kim, R. H. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.664 · Cited by 242
Szilvśi-Nagy, M., & Mátyási, G. (2003) · Mathematical and Computer Modelling · doi:10.1016/s0895-7177(03)90079-3 · Cited by 238
Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices
Park, S. ‐., Yang, D. ‐., & Lee, K. ‐. (2009) · Laser & Photonics Reviews · doi:10.1002/lpor.200810027 · Cited by 233
Two-photon polymerisation for three-dimensional micro-fabrication
Wu, S., Serbin, J., & Gu, M. (2006) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/j.jphotochem.2006.03.004 · Cited by 222
Han, D., Yang, C., Fang, N. X., & Lee, H. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.031 · Cited by 216
Development of a 3D printer using scanning projection stereolithography
Lee, M. P., Cooper, G. J. T., Hinkley, T., Gibson, G. M., Padgett, M. J., & Cronin, L. (2015) · Scientific Reports · doi:10.1038/srep09875 · Cited by 209
Stereolithography of spatially controlled multi-material bioactive poly(ethylene glycol) scaffolds
Arcaute, K., Mann, B., & Wicker, R. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.08.017 · Cited by 205
Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors
Yin, M., Yao, M., Gao, S., Zhang, A. P., Tam, H., & Wai, P. A. (2016) · Advanced Materials · doi:10.1002/adma.201504021 · Cited by 190
Microstereophotolithography using a liquid crystal display as dynamic mask-generator
Bertsch, A., Zissi, S., Jézéquel, J. Y., Corbel, S., & André, J. C. (1997) · Microsystem Technologies · doi:10.1007/s005420050053 · Cited by 186
Chen, X., Liu, W., Dong, B., Lee, J., Ware, H. O. T., Zhang, H. F., & Sun, C. (2018) · Advanced Materials · doi:10.1002/adma.201705683 · Cited by 160
A review of 3D-printed sensors
Ni, Y., Ji, R., Long, K., Bu, T., Chen, K., & Zhuang, S. (2017) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2017.1287082 · Cited by 158
Ge, L., Dong, L., Wang, D., Ge, Q., & Gu, G. (2018) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2018.02.041 · Cited by 153
Laser-based micro/nanoengineering for biological applications
Stratakis, E. I., Ranella, A., Farsari, M., & Fotakis, C. (2009) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2009.06.001 · Cited by 115
Projection-Based 3D Printing of Cell Patterning Scaffolds with Multiscale Channels
Xue, D., Wang, Y., Zhang, J., Mei, D., Wang, Y., & Chen, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b03867 · Cited by 113
Lu, L., Guo, P. Y., & Pan, Y. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4035964 · Cited by 105
Leigh, S. J., Purssell, C. P., Bowen, J., Hutchins, D. A., Covington, J. A., & Billson, D. R. (2011) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2011.03.058 · Cited by 104
Bertsch, A., Jézéquel, J. Y., & André, J. (1997) · Journal of Photochemistry and Photobiology A Chemistry · doi:10.1016/s1010-6030(96)04585-6 · Cited by 100
Metal filled resin for stereolithography metal part
Bártolo, P., & Gaspar, J. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.03.124 · Cited by 98
Multi-material, multi-technology stereolithography
Wicker, R. B., & MacDonald, E. W. (2012) · Virtual and Physical Prototyping · doi:10.1080/17452759.2012.721119 · Cited by 93
van der Laan, H. L., Burns, M. A., & Scott, T. F. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00412 · Cited by 93
Scanning-projection based stereolithography: Method and structure
Emami, M. M., Barazandeh, F., & Yaghmaie, F. (2014) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2014.08.002 · Cited by 90
3D Printing Customized Optical Lens in Minutes
Shao, G., Hai, R., & Sun, C. (2019) · Advanced Optical Materials · doi:10.1002/adom.201901646 · Cited by 88
3D scaffold fabrication with PPF/DEF using micro-stereolithography
Lee, J., Lan, P. X., Kim, B. G., Lim, G., & Cho, D. (2007) · Microelectronic Engineering · doi:10.1016/j.mee.2007.01.267 · Cited by 77
A novel high-accuracy microstereolithography method employing an adaptive electro-optic mask
Farsari, M., Claret-Tournier, F., Huang, S., Chatwin, C. R., Budgett, D., Birch, P. M., Young, R. C. D., & Richardson, J. D. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00672-5 · Cited by 72
Lu, L., Tang, X., Hu, S., & Pan, Y. (2018) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2017.0157 · Cited by 65
Microstereolithography: a new process to build complex 3D objects
Beluze, L., Bertsch, A., & Renaud, P. (1999) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.341277 · Cited by 60
Two-photon photopolymerization as a tool for making micro-devices
Kawata, S., & Sun, H. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01358-2 · Cited by 60
UV microstereolithography system that uses spatial light modulator technology
Chatwin, C. R., Farsari, M., Huang, S., Heywood, M. I., Birch, P. M., Young, R. C. D., & Richardson, J. D. (1998) · Applied Optics · doi:10.1364/ao.37.007514 · Cited by 56
Chemorheological study of the curing kinetics of a phenolic resol resin gelled
Domínguez, J. C., Alonso, M. V., Oliet, M., & Rodríguez, F. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.09.004 · Cited by 52
Microfabrication by use of a spatial light modulator in the ultraviolet:?experimental results
Farsari, M., Huang, S., Birch, P. M., et al. (1999) · Optics Letters · doi:10.1364/ol.24.000549 · Cited by 45
Photochemical and Thermal Crosslinking of Polymers
Olayan, H. B., Hami, H. S., & Owen, E. D. (1996) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15321799608014858 · Cited by 44
Consideration on the producing of high aspect ratio micro parts using UV sensitive photopolymer
NAKAMOTO, T., Yamaguchi, K., & A., P. A. (2002) · doi:10.1109/mhs.1996.563401 · Cited by 26
Application of Stereolithography to Subperiosteal Implant Manufacture
McAllister, M. L. M. (1998) · Journal of Oral Implantology · Cited by 23
Ware, H. O. T., & Sun, C. (2019) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4044128 · Cited by 21
Additive Fabrication of 3D Structures by Holographic Lithography
Shusteff, M., Panas, R. M., Henriksson, J., Kelly, B. E., Browar, A. E. M., Fang, N. X., & Spadaccini, C. M. (2016) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 6
Cited by
Kafle, A., Luis, E., Silwal, R., Pan, H. M., Shrestha, P. L., & Bastola, A. K. (2021) · Polymers · doi:10.3390/polym13183101 · Cited by 587
Review of High-Performance Sustainable Polymers in Additive Manufacturing
Chyr, G., & DeSimone, J. M. (2023) · Green Chemistry · doi:10.1039/d2gc03474c · Cited by 136
Karamikamkar, S., Yalcintas, E. P., Haghniaz, R., de Barros, N. R., Mecwan, M., Nasiri, R., Davoodi, E., Nasrollahi, F., Erdem, A., Kang, H., et al. (2023) · Advanced Science · doi:10.1002/advs.202204681 · Cited by 109
A comprehensive review of lunar-based manufacturing and construction
Azami, M., Kazemi, Z., Moazen, S., Dubé, M., Potvin, M.-J., & Skonieczny, K. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101045 · Cited by 57
Metadata
- Authors
- Huang, J., Qin, Q., & Wang, J.
- Venue
- Processes
- Publisher
- MDPI AG
- Published
- 2020-09-11
- Volume
- 8
- Issue
- 9
- Pages
- 1138
- ISSN
- 2227-9717 (ISSN-L)
- OpenAlex
- W3086315669
- Cited by
- 597
- References
- 73
- FWCI
- 18.91
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.