Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction
Open accessThe DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index; 9 of the 42 sources its claims cite were checked for support.
Abstract
In the over 1,800 articles published since their inception in 2001, most deep eutectic solvents (DES) synthesized have been hydrophilic. The low cost, low toxicity, and bioavailability of DES make the solvent ‘green’ and sustainable for diverse applications. Conversely, the hydrophilicity of DES limits their practical application to only polar compounds, which is a major drawback of the solvent. For the past three years, hydrophobic deep eutectic solvents (HDES) have emerged as an alternative extractive media capable of extracting non-polar organic and inorganic molecules from aqueous environments. Due to the infancy of HDES, for the first time, this mini-review summarizes the recent developmental advances in HDES synthesis, applications, challenges, and future perspectives of the solvent. In the future, it is believed HDES will replace the majority of toxic organic solvents used for analytical purposes.
Overview
CoChat Summary
TL;DR
This mini-review summarizes the emergence and recent applications of hydrophobic deep eutectic solvents (HDES) for extracting non-polar organics and metals from aqueous environments. It argues HDES are promising greener alternatives to toxic organic solvents, while noting unresolved issues such as high viscosity, phase-separation difficulty, and limited toxicity data.
Key findings
- HDES were introduced in 2015 by van Osch and co-workers by combining quaternary ammonium salts with decanoic acid; the first application extracted volatile fatty acids, with N8881-Cl:DecA (1:2) extracting 38% acetic acid, 70.5% propionic acid, and 89.8% butyric acid.
- Reported HDES extraction examples include bisphenol A efficiencies of 76.04%, 88.32%, and 81.81% using C8-C12 (3:1), C9-C12 (3:1), and C10-C12 (2:1) HDES; synthetic pigments recovered at 74.5–102.5% with RSD <5.4%; phytocannabinoid yields of 118.6–132.6%; and polyprenyl acetate extraction of 13–23 mg/g from Ginkgo biloba leaves.
- The review reports that out of 1,860 Web of Science hits for “deep eutectic solvents,” over 88% of DES articles are from 2013–2018, and over 175 articles are DES reviews from the past 5 years; most DES remain hydrophilic.
- HDES have also been applied to metal extraction, CO2 solubility modeling, oil absorption (65–205 g/g, reusable for about 30 cycles), and electrochemical studies; water above 2% w/w in tetrabutylammonium chloride/decanoic acid HDES improved conductivity and mass transfer.
Methods
- Design: a mini-review of recent HDES synthesis, applications, challenges, and perspectives, focused on literature published mainly after the 2015 introduction of HDES.
- Data: narrative synthesis of prior studies, with tables summarizing HDES synthesis combinations and extraction applications; a Web of Science search for “deep eutectic solvents” is reported (1,860 hits).
- Analysis: qualitative overview and tabulation of reported HDES systems, analytes, separation/quantification techniques, and extraction outcomes; no primary experimental work is presented.
Limitations
- The paper states that notable HDES limitations include high viscosity, cloudiness, and difficulty in phase separation during liquid-liquid extraction.
- The paper states that little has been done to monitor HDES toxicity, vapor pressure, or bioavailability, and that the distinction between hydrophilic and hydrophobic DES is sometimes confusing because hydrophobicity is relative.
- The paper states that common long-alkyl-chain quaternary ammonium salts used for HDES are expensive, making industrial usage difficult; it also notes the field is in its infancy and that detailed discussion of synthesis, extraction techniques, and instrumental analysis is beyond the scope of the article. Evident from the text, this is a non-systematic mini-review rather than a primary study or systematic review.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
7 Valid · 5 Not valid · 24 Not checked · 20 Own results and interpretations
Every source the paper cites for this claim was checked and supports it.
In the paper
“The concept of DES in extraction is still in its infancy [20] compared to ionic liquids, nonetheless, the increasing number of yearly publications make the field very promising.”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 1. Introduction
What the sources say
- Supportedcites [20] Shishov, 2017, Application of deep eutectic solvents in analytical chemistry. A review, Microchem. J. source
The Introduction says DES use in analytical chemistry is still in its infancy and describes the growing number of papers on DES-based extraction. Section 2 describes ionic liquids as already successfully applied in extraction techniques, supporting the comparison. (LLM, conf=0.88)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
None of the sources cited for this claim have been checked yet.
In the paper
“In the over 1,800 articles published since their inception in 2001, most deep eutectic solvents (DES) synthesized have been hydrophilic.”
- Also stated in: § 1. Introduction · plain
“Despite the numerous publications about DES since their first inception in 2001 [12,15], most of the research work has concentrated mainly on hydrophilic DES, which limits the solvents utilization to polar environments [12,16].”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > Abstract
What the sources say
- Could not verifycites [12] Smith, 2014, Deep eutectic solvents (DESs) and their applications, Chem. Rev. sourceExperimental — accuracy not yet measured
Our copy confirms only the framing that DESs date from the 2001 Abbott et al. paper (Introduction/section 1.1, pp. 1-2) and that most DESs reviewed are choline chloride with amide, carboxylic acid or alcohol HBDs (CONTENTS, p. 2); nowhere does it state that most DESs synthesized have been hydrophilic. Its only water-related statements are that type III DESs are 'relatively unreactive with water' (p. 2) and that DESs 'are partly miscible with water' (2.6 Green Credentials, p. 8) — neither is a claim about the proportion of DESs that are hydrophilic. Searches for 'hydrophilic', 'water miscibility', 'hygroscopic' and 'most DESs' returned no such statement, so the point is not addressed by our copy (note also that the citing sentence's 'over 1,800 articles' does not match this review's figure of publications 'approaching 200' for 2001–early 2012, Introduction, p. 1). (LLM, conf=0.62)
- Not checked yetcites [15] Abbott, A.P., Capper, G., Davies, D.L., Munro, H.L., Rasheed, R.K., and Tambyrajah, V. (2001). Preparation of novel, moisture-stable, Lewis-acidic ionic liquids containing quaternary ammonium salts with functional side chains. Chem. Commun., 2010–2011. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 1. Introduction · plain
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Most of the synthesized DES reviewed [10,12,22] are hydrophilic.”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > General Formula Terms
What the sources say
- Supportedcites [10] 2012, Low melting mixtures in organic synthesis–an alternative to ionic liquids?, Green Chem. source
In “2 Reactions in low melting mixtures” (p. 6), the review says most components are water-soluble and that adding water dissolves the reaction medium. This supports the paraphrase that most of the DES discussed are hydrophilic, although the paper does not use that term. (LLM, conf=0.84)
- Partly supportedcites [12] Smith, 2014, Deep eutectic solvents (DESs) and their applications, Chem. Rev. sourceExperimental — accuracy not yet measured
Section 2.6 (p. 8) says DESs are partly miscible with water, which supports an affinity for water. The review does not establish that most of the DESs it covers are hydrophilic; its conclusion (p. 19) says only that a narrow range of DESs had been utilized. (LLM, conf=0.77)
- Not checked yetcites [22] Francisco, 2013, Low-transition-temperature mixtures (LTTMs): A new generation of designer solvents, Angew. Chem. Int. Ed. source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“In addition, the researchers showed that an aqueous solution containing a salt of metallic cation, Cr(VI), could be extracted by using a hydrophobic DES [73].”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 6. Challenges, Opportunities, and Perspectives
What the sources say
- Supportedcites [73] Ruggeri, S., Poletti, F., Zanardi, C., Pigani, L., Zanfrognini, B., Corsi, E., Dossi, N., Salomäki, M., Kivelä, H., and Lukkari, J. (2018). Chemical and electrochemical properties of a hydrophobic deep eutectic solvent. Electrochim. Acta. source
Section 2.5 describes mixing an aqueous solution of a metal salt with a hydrophobic DES for extraction. Section 3.2 reports that DES4 extracted Cr(VI) from aqueous solutions, with quantitative transfer under the stated conditions. (LLM, conf=0.93)
hedgedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
Every source the paper cites for this claim was checked and supports it.
In the paper
“Water content above 2% w/w in HDES enables effective mass transfer to and from the electrode surface [73].”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 6. Challenges, Opportunities, and Perspectives
What the sources say
- Supportedcites [73] Ruggeri, S., Poletti, F., Zanardi, C., Pigani, L., Zanfrognini, B., Corsi, E., Dossi, N., Salomäki, M., Kivelä, H., and Lukkari, J. (2018). Chemical and electrochemical properties of a hydrophobic deep eutectic solvent. Electrochim. Acta. source
Section 3.1 reports that DES samples below 2% w/w water had unsuitable conductivity and viscosity, while DES4 at 2.4% w/w allowed effective mass transfer to and from the electrode surface. The finding concerns the particular hydrophobic DES formulation tested, rather than every water content above 2%. (LLM, conf=0.91)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
19 more claims
Create a free account to see all 56 claims and to verify the 33 references still open.
- It may state two separate claims as one. 15
- Probably not a substantial claim. 24
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 5. Applications of HDES in Extraction
“Another liquid-liquid extraction of metal uranyl nitrate ([UO2] 2+ ) from aqueous acid using low viscous hydrophobic eutectic solvent from trioctylphosphine and phenol has been reported [65].”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > References
“65. Gilmore, M.; McCourt, E.; Connolly, F.; Nockemann, P.; Swadzba-Kwasny, M.; Holbrey, J.D. Hydrophobic deep eutectic solvents incorporating trioctylphosphine oxide: Advanced liquid extractants. ACS Sustain. Chem. Eng. 2018. [CrossRef]”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 5. Applications of HDES in Extraction
“Lastly, few reports on using HDES for In 3+ [69] and Co 3+ [70] extraction from aqueous solutions have been established.”
§ Recent Advances in Hydrophobic Deep Eutectic Solvents for Extraction > 5. Applications of HDES in Extraction
“For instance, the positive charged Co 2+ ion is able to exchange with the partially positive charged lidocaine ion during a LLE with a hydrophobic solvent comprising of DecA and lidocaine [70].”
Citations
Cites
Deep Eutectic Solvents (DESs) and Their Applications
Smith, E. L., Abbott, A. P., & Ryder, K. S. (2014) · Chemical Reviews · doi:10.1021/cr300162p · Cited by 7,378 · cited 5×
“Abbott and co-workers [12] found that choline chloride (mp = 302 ◦C) and urea (mp = 133 ◦C) interact to form a liquid at room temperature with a freezing point of 12 ◦C at 1:2 molar ratio.”
BackgroundInfluentialSolvents and Solvent Effects in Organic Chemistry
Reichardt, C. (2002) · Wiley eBooks · doi:10.1002/3527601791 · Cited by 5,789
Abbott, A. P., Capper, G., Davies, D. L., Rasheed, R. K., & Tambyrajah, V. (2003) · Chemical Communications · doi:10.1039/b210714g · Cited by 5,738
Deep eutectic solvents: syntheses, properties and applications
Zhang, Q., De Oliveira Vigier, K., Royer, S., & Jérôme, F. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35178a · Cited by 4,899 · cited 2×
“com/journal/Separations concentrated mainly on hydrophilic DES, which limits the solvents utilization to polar environments [12,16].”
BackgroundAbbott, A. P., Boothby, D., Capper, G., Davies, D. L., & Rasheed, R. K. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048266j · Cited by 4,340 · cited 1×
“The type III DES are categorized into low-transition-temperature mixtures (LTTMs), natural deep eutectic solvents (NADES), carboxylic acid-based deep eutectic solvents [5,13, 23], and therapeutic deep eutectic solvents (THEDES) [24,25].”
BackgroundSolvents and Solvent Effects in Organic Chemistry
Reichardt, C., & Welton, T. (2010) · Wiley eBooks · doi:10.1002/9783527632220 · Cited by 4,280
Ionic Liquids--Solvents of the Future?
Rogers, R. D., & Seddon, K. R. (2003) · Science · doi:10.1126/science.1090313 · Cited by 4,130
Natural deep eutectic solvents as new potential media for green technology
Dai, Y., van Spronsen, J., Witkamp, G.-J., Verpoorte, R., & Choi, Y. H. (2013) · Analytica Chimica Acta · doi:10.1016/j.aca.2012.12.019 · Cited by 2,694
Natural Deep Eutectic Solvents – Solvents for the 21st Century
Paiva, A., Craveiro, R., Aroso, I., Martins, M., Reis, R. L., & Duarte, A. R. C. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500096j · Cited by 2,458
Green solvents for sustainable organic synthesis: state of the art
Sheldon, R. A. (2005) · Green Chemistry · doi:10.1039/b418069k · Cited by 1,711
Low-transition-temperature mixtures (LTTMs): A new generation of designer solvents
Francisco, M., van den Bruinhorst, A., & Kroon, M. C. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201207548 · Cited by 1,378 · cited 2×
“Most of the synthesized DES reviewed [10, 12,22] are hydrophilic.”
BackgroundChoi, Y. H., van Spronsen, J., Dai, Y., Verberne, M., Hollmann, F., Arends, I. W. C. E., Witkamp, G.-J., & Verpoorte, R. (2011) · Plant Physiology · doi:10.1104/pp.111.178426 · Cited by 1,368 · cited 1×
“NADES were introduced when cellular constituents like fructose, glucose, citric acid, proline, and other metabolites formed a viscous liquid at defined molar ratios [41].”
BackgroundNatural deep eutectic solvents: Properties, applications, and perspectives
Liu, Y., Friesen, J. B., McAlpine, J. B., Lankin, D. C., Chen, S.-N., & Pauli, G. F. (2018) · Journal of Natural Products · doi:10.1021/acs.jnatprod.7b00945 · Cited by 1,304
Abbott, A. P., Capper, G., Davies, D. L., Munro, H. L., Rasheed, R. K., & Tambyrajah, V. (2001) · Chemical Communications · doi:10.1039/b106357j · Cited by 1,100 · cited 1×
“Despite the numerous publications about DES since their first inception in 2001 [12,15], most of the research work has concentrated mainly on hydrophilic DES, which limits the solvents utilization to polar environments [12,16].”
BackgroundJessop, P. G. (2011) · Green Chemistry · doi:10.1039/c0gc00797h · Cited by 1,060 · cited 2×
“The availability of greener solvents in all of the four solvent categories, high basicity-low polarity, low basicity-low polarity, high basicity-high polarity, and low basicity-high polarity, is pivotal to ensuring sustainability [17].”
Hydrophobic deep eutectic solvents as water-immiscible extractants
van Osch, D. J. G. P., Zubeir, L. F., van den Bruinhorst, A., Rocha, M. A. A., & Kroon, M. C. (2015) · Green Chemistry · doi:10.1039/c5gc01451d · Cited by 987 · cited 9×
“The concept of hydrophobic DES (HDES) was introduced by van Osch and co-workers [21] in 2015 when they combined diverse quaternary ammonium salts (QAS) with decanoic acid (DecA).”
BackgroundMethodInfluentialFlorindo, C., Oliveira, F. S., Rebelo, L. P. N., Fernandes, A. M., & Marrucho, I. M. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500439w · Cited by 977 · cited 2×
“The advantages of using DES for extraction goes beyond their simple preparation procedures, greener nature, and easy tunability [11,13,14], as they are bioavailable and have low toxicity.”
BackgroundPractical Approaches to Green Solvents
DeSimone, J. M. (2002) · Science · doi:10.1126/science.1069622 · Cited by 928 · cited 1×
“The challenge stems from the difficulty to acquire more sustainable and greener alternatives to toxic volatile organic chemicals with the desired chemical and physical properties [2].”
BackgroundFrancisco, M., van den Bruinhorst, A., & Kroon, M. C. (2012) · Green Chemistry · doi:10.1039/c2gc35660k · Cited by 814 · cited 1×
“The LTTMs are synthesized mostly by mixing natural high-melting-point starting materials, which form a liquid by hydrogen-bond interactions with notable applications in organic synthesis [26–28], biofuel processing [29,30], and catalysis [10,31].”
BackgroundDai, Y., Witkamp, G.-J., Verpoorte, R., & Choi, Y. H. (2013) · Analytical Chemistry · doi:10.1021/ac400432p · Cited by 678
Menthol-based Eutectic Mixtures: Hydrophobic Low Viscosity Solvents
Ribeiro, B. D., Florindo, C., Iff, L. C., Coelho, M. A. Z., & Marrucho, I. M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00532 · Cited by 672 · cited 2×
“heating at 50 ◦C for 15 min [58] lactic acid 1:2 lauric acid 2:1 pyruvic acid 1:2 choline chloride phenethyl alcohol 1:4 stirring at ambient temperature [50]”
MethodLow melting mixtures in organic synthesis–an alternative to ionic liquids?
Ruß, C., & König, B. (2012) · Green Chemistry · doi:10.1039/c2gc36005e · Cited by 654 · cited 2×
“The LTTMs are synthesized mostly by mixing natural high-melting-point starting materials, which form a liquid by hydrogen-bond interactions with notable applications in organic synthesis [26–28], biofuel processing [29,30], and catalysis [10,31].”
BackgroundZhao, B.-Y., Xu, P., Yang, F.-X., Wu, H., Zong, M.-H., & Lou, W.-Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00619 · Cited by 617 · cited 1×
“The advantages of using DES for extraction goes beyond their simple preparation procedures, greener nature, and easy tunability [11,13,14], as they are bioavailable and have low toxicity.”
BackgroundApplication of deep eutectic solvents in analytical chemistry. A review
Shishov, A., Bulatov, A., Locatelli, M., Carradori, S., & Andruch, V. (2017) · Microchemical Journal · doi:10.1016/j.microc.2017.07.015 · Cited by 617 · cited 1×
“The concept of DES in extraction is still in its infancy [20] compared to ionic liquids, nonetheless, the increasing number of yearly publications make the field very promising.”
BackgroundSatlewal, A., Agrawal, R., Bhagia, S., Sangoro, J., & Ragauskas, A. J. (2018) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.08.009 · Cited by 552
Morrison, H. G., Sun, C. C., & Neervannan, S. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.05.039 · Cited by 552 · cited 2×
“Compared to water, choline chloride‐urea and choline chloride‐malonic acid DES improved their solubility with benzoic acid, danazol, griseofulvin, AMG517, and itraconazole by 5 to 22,000 folds [49].”
BackgroundDesign of improved deep eutectic solvents using hole theory
Abbott, A. P., Capper, G., & Gray, S. (2006) · ChemPhysChem · doi:10.1002/cphc.200500489 · Cited by 545 · cited 1×
“The advantages of using DES for extraction goes beyond their simple preparation procedures, greener nature, and easy tunability [11,13,14], as they are bioavailable and have low toxicity.”
BackgroundTang, B., Zhang, H., & Row, K. H. (2015) · Journal of Separation Science · doi:10.1002/jssc.201401347 · Cited by 522
Green solvents from ionic liquids and deep eutectic solvents to natural deep eutectic solvents
Vanda, H., Dai, Y., Wilson, E. G., Verpoorte, R., & Choi, Y. H. (2018) · Comptes Rendus. Chimie · doi:10.1016/j.crci.2018.04.002 · Cited by 467 · cited 3×
“[48] looked into the evolution of NADES from ionic liquids and DES, and further expanded on the applications of NADES in pharmaceuticals, cosmetics, food, and agricultural settings.”
BackgroundInfluentialNam, M. W., Zhao, J., Lee, M. S., Jeong, J. H., & Lee, J. (2015) · Green Chemistry · doi:10.1039/c4gc01556h · Cited by 467
Florindo, C., Branco, L. C., & Marrucho, I. M. (2017) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2017.04.002 · Cited by 457 · cited 2×
“Low alkyl chain carboxylic acids like acetic acid, butyric acid, levulinic acid, hexanoic acid, and pyruvic acid have been used together with the DL-menthol or N4444-Cl for HDES synthesis [56].”
MethodIonic liquids and deep eutectic mixtures: Sustainable solvents for extraction processes
Pena‐Pereira, F., & Namieśnik, J. (2014) · ChemSusChem · doi:10.1002/cssc.201301192 · Cited by 432
Radošević, K., Ćurko, N., Gaurina Srček, V., Cvjetko Bubalo, M., Tomašević, M., Kovačević Ganić, K., & Radojčić Redovniković, I. (2016) · LWT · doi:10.1016/j.lwt.2016.05.037 · Cited by 404
Florindo, C., Romero, L., Rintoul, I., Branco, L. C., & Marrucho, I. M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b04235 · Cited by 389 · cited 4×
“DoDecA octanoic acid 1:3 heating at 40 ◦C [55] nonanoic acid 1:3 DecA 1:2 betaine HFI 1:2, 1:2.”
BackgroundMethodInfluentialLynam, J. G., Kumar, N., & Wong, M. J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.04.079 · Cited by 374
Tunable Hydrophobic Eutectic Solvents Based on Terpenes and Monocarboxylic Acids
Martins, M. A. R., Crespo, E. A., Pontes, P. V. A., Silva, L. P., Bülow, M., Maximo, G. J., Batista, E. A. C., Held, C., Pinho, S. P., & Coutinho, J. A. P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01203 · Cited by 359 · cited 3×
“As expected, despite the similarities between thymol and L (-) menthol, the physical and chemical properties of their resulting solvent differ with thymol having higher hydrogen bonding acidity character and menthol having higher basicity behavior [57].”
BackgroundInfluentialMakoś, P., Przyjazny, A., & Boczkaj, G. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.07.070 · Cited by 342 · cited 4×
“The physical and chemical properties of HDES were tailored for pyrethroids [53] and polycyclic aromatic hydrocarbons (PAH) [54] extraction by modifying the molar ratio of the constituents.”
BackgroundInfluentialA novel technique for separating glycerine from palm oil-based biodiesel using ionic liquids
Hayyan, M., Mjalli, F. S., Hashim, M. A., & AlNashef, I. M. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.09.002 · Cited by 326 · cited 1×
“The LTTMs are synthesized mostly by mixing natural high-melting-point starting materials, which form a liquid by hydrogen-bond interactions with notable applications in organic synthesis [26–28], biofuel processing [29,30], and catalysis [10,31].”
BackgroundIonic liquids and deep eutectic solvents for biodiesel synthesis: a review
Zhao, H., & Baker, G. A. (2013) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.3935 · Cited by 313 · cited 1×
“A review of the application of hydrophobic ILs in biodiesel synthesis is available [19].”
BackgroundElectrochemistry in Deep Eutectic Solvents
Nkuku, C. A., & LeSuer, R. J. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp075794j · Cited by 308 · cited 1×
“A comprehensive review of deep eutectic solvents and their application in modifying electrode surfaces for electrochemical sensing and biosensors has been published [38,39].”
BackgroundFernández, M. D. L. Á., Boiteux, J., Espino, M., Gomez, F. J. V., & Silva, M. F. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.07.059 · Cited by 307
Removal of alkali and transition metal ions from water with hydrophobic deep eutectic solvents
van Osch, D. J. G. P., Parmentier, D., Dietz, C. H. J. T., van den Bruinhorst, A., Tuinier, R., & Kroon, M. C. (2016) · Chemical Communications · doi:10.1039/c6cc06105b · Cited by 295 · cited 2×
“Lastly, few reports on using HDES for In3+ [69] and Co3+ [70] extraction from aqueous solutions have been established.”
BackgroundDissolution enhancement of active pharmaceutical ingredients by therapeutic deep eutectic systems
Aroso, I. M., Silva, J. C., Mano, F., Ferreira, A. S. D., Dionísio, M., Sá-Nogueira, I., Barreiros, S., Reis, R. L., Paiva, A., & Duarte, A. R. C. (2016) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2015.11.002 · Cited by 262 · cited 5×
“Commonly used API include acetylsalicylic acid, benzoic acid, ibuprofen, and phenylacetic acid [24,25].”
BackgroundMethodInfluentialSolvent Extraction: Classical and Novel Approaches
Kislik, V. S. (2011) · Cited by 252
Laitinen, O., Suopajärvi, T., Österberg, M., & Liimatainen, H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06304 · Cited by 241 · cited 2×
“Recently, a low cost, highly porous, ultralight and hydrophobic HDES was synthesized (combined techniques of nanofibrillation, silylation, and freeze-drying) and the aerosol was capable of squeezing oil (superabsorbing agents) with an absorption capacity of 65–205 (g/g) [66].”
MethodDurand, E., Lecomte, J., Baréa, B., Piombo, G., Dubreucq, E., & Villeneuve, P. (2012) · Process Biochemistry · doi:10.1016/j.procbio.2012.07.027 · Cited by 237 · cited 1×
“The use of DES as media for Candida antartica B lipase transesterification reactions is explained in detail [40].”
MethodCao, J., Yang, M., Cao, F., Wang, J., & Su, E. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03092 · Cited by 236 · cited 3×
“artemisinin HPLC/UV-Vis [51] polycyclic aromatic hydrocarbons GC-MS [54]”
BackgroundShahbaz, K., Mjalli, F. S., Hashim, M. A., & AlNashef, I. M. (2011) · Energy & Fuels · doi:10.1021/ef2004943 · Cited by 230 · cited 1×
“The LTTMs are synthesized mostly by mixing natural high-melting-point starting materials, which form a liquid by hydrogen-bond interactions with notable applications in organic synthesis [26–28], biofuel processing [29,30], and catalysis [10,31].”
BackgroundLow-melting sugar–urea–salt mixtures as solvents for Diels–Alder reactions
Imperato, G., Eibler, E., Niedermaier, J., & König, B. (2005) · Chem. Commun. · doi:10.1039/b414515a · Cited by 208
Aroso, I. M., Craveiro, R., Rocha, Â., Dionísio, M., Barreiros, S., Reis, R. L., Paiva, A., & Duarte, A. R. C. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.06.038 · Cited by 206 · cited 5×
“Commonly used API include acetylsalicylic acid, benzoic acid, ibuprofen, and phenylacetic acid [24,25].”
BackgroundMethodInfluentialTereshatov, E. E., Boltoeva, M. Y., & Folden, C. M. (2016) · Green Chemistry · doi:10.1039/c5gc03080c · Cited by 192 · cited 2×
“Lastly, few reports on using HDES for In3+ [69] and Co3+ [70] extraction from aqueous solutions have been established.”
BackgroundMethodCarbon Dioxide Solubilities in Decanoic Acid-Based Hydrophobic Deep Eutectic Solvents
Zubeir, L. F., van Osch, D. J. G. P., Rocha, M. A. A., Banat, F., & Kroon, M. C. (2018) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.7b00534 · Cited by 191 · cited 2×
“DecA 1:2 vortex mixing at room temperature and heating at 308 K in oil bath [60,61] N8881-Cl N8881-Br N8888-Cl N8888-Br”
MethodKřížek, T., Bursová, M., Horsley, R., Kuchař, M., Tůma, P., Čabala, R., & Hložek, T. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.05.080 · Cited by 189 · cited 4×
“Menthol with oxalic, malonic, tartaric, phthalic, glycolic, malic, hippuric, pyruvic, and aspartic acid (1:1) form a solid–liquid mixture even after heat treatment at 80–95 ◦C [67].”
BackgroundMethodInfluentialImperato, G., Höger, S., Lenoir, D., & König, B. (2006) · Green Chem. · doi:10.1039/b603660k · Cited by 186
Karimi, M., Dadfarnia, S., Shabani, A. M. H., Tamaddon, F., & Azadi, D. (2015) · Talanta · doi:10.1016/j.talanta.2015.07.021 · Cited by 182
Green Carboxylic Acid-Based Deep Eutectic Solvents as Solvents for Extractive Desulfurization
Li, J.-J., Xiao, H., Tang, X.-D., & Zhou, M. (2016) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b00471 · Cited by 181 · cited 1×
“The type III DES are categorized into low-transition-temperature mixtures (LTTMs), natural deep eutectic solvents (NADES), carboxylic acid-based deep eutectic solvents [5,13, 23], and therapeutic deep eutectic solvents (THEDES) [24,25].”
BackgroundDeep eutectic solvents and applications in electrochemical sensing
Brett, C. M. A. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.05.016 · Cited by 175 · cited 1×
“A comprehensive review of deep eutectic solvents and their application in modifying electrode surfaces for electrochemical sensing and biosensors has been published [38,39].”
BackgroundGilmore, M., McCourt, É. N., Connolly, F., Nockemann, P., Swadźba-Kwaśny, M., & Holbrey, J. D. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04843 · Cited by 169 · cited 2×
“The presence of phenol in the mixture was crucial for generating the eutectic mixture composition rather than having a role in the uranyl complexation and extraction [65].”
BackgroundDeng, W., Yu, L., Li, X., Chen, J., Wang, X., Deng, Z., & Xiao, Y. (2019) · Food Chemistry · doi:10.1016/j.foodchem.2018.09.048 · Cited by 168 · cited 4×
“The physical and chemical properties of HDES were tailored for pyrethroids [53] and polycyclic aromatic hydrocarbons (PAH) [54] extraction by modifying the molar ratio of the constituents.”
BackgroundMethodInfluentialZhu, S., Zhou, J., Jia, H., & Zhang, H. (2018) · Food Chemistry · doi:10.1016/j.foodchem.2017.09.141 · Cited by 166 · cited 1×
“The high extraction efficiency exhibited by tetrabutylammonium chloride and octanoic acid HDES is due to the low viscosity of the solvent which enhances its diffusivity [64].”
BackgroundCao, J., Yang, M., Cao, F., Wang, J., & Su, E. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.03.140 · Cited by 161 · cited 2×
“Irrespective of the extraction temperature used (25 ◦C or 60 ◦C), polyprenyl acetates extraction by stirring gave higher yield [68].”
BackgroundMethodVerma, R., & Banerjee, T. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b05270 · Cited by 159 · cited 3×
“5:1 reflux condensing for 1 h at 50 ◦C with stirring [62]”
BackgroundMethodGreener Media in Chemical Synthesis and Processing
Avalos, M., Babiano, R., Cintas, P., Jiménez, J. L., & Palacios, J. C. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200504285 · Cited by 158
Hizaddin, H. F., Ramalingam, A., Hashim, M. A., & Hadj-Kali, M. K. O. (2014) · Journal of Chemical & Engineering Data · doi:10.1021/je5004302 · Cited by 122 · cited 1×
“[37] screened 94 DES by applying a conductor-like screening model for realistic solvents (COSMO-RS) and evaluated their potential usage for extractive denitrification of diesel.”
MethodPhelps, T. E., Bhawawet, N., Jurisson, S. S., & Baker, G. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03950 · Cited by 122 · cited 3×
“pertechnetate (99mTcO4−) equilibration and TLC/NaI (Tl) well counter detector [52]”
BackgroundMethodChemical and electrochemical properties of a hydrophobic deep eutectic solvent
Ruggeri, S., Poletti, F., Zanardi, C., Pigani, L., Zanfrognini, B., Corsi, E., Dossi, N., Salomäki, M., Kivelä, H., Lukkari, J., et al. (2019) · Electrochimica Acta · doi:10.1016/j.electacta.2018.10.086 · Cited by 110
Safavi, A., Ahmadi, R., & Ramezani, A. M. (2018) · Microchemical Journal · doi:10.1016/j.microc.2018.07.036 · Cited by 101 · cited 2×
“5, 1:3 heating at 80 ◦C in screw-cap pressure tube [53] L-carnitine N8881-Br DecA 1:2 stirring and heating at 35 ◦C [59] N4444-Cl”
BackgroundMethodPC-SAFT modeling of CO 2 solubilities in hydrophobic deep eutectic solvents
Dietz, C. H. J. T., van Osch, D. J. G. P., Kroon, M. C., Sadowski, G., van Sint Annaland, M., Gallucci, F., Zubeir, L. F., & Held, C. (2017) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2017.03.028 · Cited by 97 · cited 1×
“For example, a PC-SAFT ‘pseudo-pure’ method was used for the modeling of CO2 solubilities in HDES [71], a potential application in CO2 capture.”
MethodLozano, P., Bernal, J. M., & Vaultier, M. (2011) · Fuel · doi:10.1016/j.fuel.2011.06.008 · Cited by 96 · cited 1×
“A hydrophobic ILs involving [NTf2] anion, ([Bmim][NTf2]), was reported to be more efficient in the enzymatic synthesis of biodiesel compared to the hydrophilic [PF6] and [BF4] anionic counterparts [18].”
BackgroundZubeir, L. F., Romanos, G. E., Weggemans, W. M. A., Iliev, B., Schubert, T. J. S., & Kroon, M. C. (2015) · Journal of Chemical & Engineering Data · doi:10.1021/je500765m · Cited by 87 · cited 2×
“DecA 1:2 vortex mixing at room temperature and heating at 308 K in oil bath [60,61] N8881-Cl N8881-Br N8888-Cl N8888-Br”
MethodRajabi, M., Ghassab, N., Hemmati, M., & Asghari, A. (2018) · Journal of Chromatography A · doi:10.1016/j.chroma.2018.07.040 · Cited by 76 · cited 4×
“A low limit of detection (LOD) for amphetamine and methamphetamine is between 2 ng/mL to 5 ng/mL [50].”
BackgroundMethodInfluentialDietz, C. H. J. T., Kroon, M. C., Di Stefano, M., van Sint Annaland, M., & Gallucci, F. (2018) · Faraday Discussions · doi:10.1039/c7fd00152e · Cited by 72 · cited 3×
“Opportunities in tunneling HDES viscosity for enhanced transport and yield is requested [72].”
BackgroundMethodInfluentialWang, L., Dai, D., Chen, Q., & He, M. (2013) · Asian Journal of Organic Chemistry · doi:10.1002/ajoc.201300192 · Cited by 29
One-Pot Synthesis of Nitriles from Aldehydes Catalyzed by Deep Eutectic Solvent
Nagarkar, J. M., Patil, U., & Shendage, S. S. (2013) · Synthesis · doi:10.1055/s-0033-1339904 · Cited by 25
Cited by
Deep eutectic solvents: A review of fundamentals and applications
Hansen, B. B., Spittle, S., Chen, B., Poe, D., Zhang, Y., Klein, J. M., Horton, A., Adhikari, L., Zelovich, T., Doherty, B. W., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00385 · Cited by 3,422
Sustainable synthesis of natural deep eutectic solvents (NADES) by different methods
Santana, A. P. R., Mora-Vargas, J. A., Guimarães, T. G. S., Amaral, C. D. B., Oliveira, A., & Gonzalez, M. H. (2019) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.111452 · Cited by 308
Deep eutectic solvents. The new generation of green solvents in analytical chemistry
Santana-Mayor, Á., Rodríguez-Ramos, R., Herrera-Herrera, A. V., Socas-Rodríguez, B., & Rodríguez-Delgado, M. Á. (2021) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2020.116108 · Cited by 298
Farooq, M. Q., Abbasi, N. M., & Anderson, J. L. (2020) · Journal of Chromatography A · doi:10.1016/j.chroma.2020.461613 · Cited by 222
Zhang, M., Zhang, X., Liu, Y., Wu, K., Zhu, Y., Lu, H., & Liang, B. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-14485-2 · Cited by 214
“Hydrophobic DESs not only have obvious advantages in extraction and separation, but also are carriers for drug solubilization, and can replace many toxic organic solvents in analysis (Dwamena 2019).”
Background
Metadata
- Authors
- Dwamena, A.
- Affiliations
- South Dakota State University (US)
- Corresponding author
- Dwamena, Amos
- ORCID
- Dwamena, Amos
- Venue
- Separations
- Publisher
- MDPI AG
- Published
- 2019-02-12
- Volume
- 6
- Issue
- 1
- Pages
- 9
- ISSN
- 2297-8739 (ISSN-L)
- OpenAlex
- W2913206390
- Cited by
- 294
- References
- 74
- Citations by year
- 2026: 33 · 2025: 50 · 2024: 42 · 2023: 53 · 2022: 42 · 2021: 35 · 2020: 34 · 2019: 5
- FWCI
- 6.07
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Separations (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Ionic liquids properties and applications
- Physical Sciences › Chemistry › Analytical Chemistry › Analytical chemistry methods development
- Physical Sciences › Chemical Engineering › Filtration and Separation › Chemical and Physical Properties in Aqueous Solutions
- Keywords
- hydrophobic deep eutectic solvents, deep eutectic solvents, solvent extraction, green solvents, aqueous-organic extraction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-09-30, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-09-30 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol and qwen3.8-omni-flash).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.