Cited by 294biodegradable polymer synthesis and propertiesPolymer crystallization and propertiesWaste Management and Recycling

The DOI matches its Crossref record; 148 of the 150 references it cites were found in a registry or an index.

The Chemical Recycling of PLA: A Review

Open access

McKeown, Paul, Jones, Matthew D.·2020·Sustainable Chemistry

DOI 10.3390/suschem1010001

Open this paper in CoChat — free account Open PDF

Abstract

Plastics are an indispensable material with numerous benefits and advantages compared to traditional materials, such as glass and paper. However, their widespread use has caused significant environmental pollution and most plastics are currently nonrenewable. Biobased polymers represent an important step for tackling these issues, however, the end-of-life disposal of such materials needs to be critically considered to allow for a transition to a circular economy for plastics. Poly(lactic acid) (PLA) is an important example of a biobased polymer, which is also biodegradable. However, industrial composting of PLA affords water and carbon dioxide only and in the natural environment, PLA has a slow biodegradation rate. Therefore, recycling processes are important for PLA, particularly chemical recycling, which affords monomers and useful platform chemicals, maintaining the usefulness and value of the material. This review covers the different methods of PLA chemical recycling, highlighting recent trends and advances in the area.

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Integrity signals

Registry

Crossref · 10.3390/suschem1010001

Cites

148 of 148 references verified0 citation errors · 0 not checkable

Statistics

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Plastic waste inputs from land into the ocean
Jambeck, J. R., Geyer, R., Wilcox, C., Siegler, T. R., Perryman, M., Andrady, A., Narayan, R., & Law, K. L. (2015) · Science · doi:10.1126/science.1260352 · Cited by 13,163
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Applications and societal benefits of plastics
Andrady, A. L., & Neal, M. A. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0304 · Cited by 2,464
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Future Scenarios of Global Plastic Waste Generation and Disposal
Lebreton, L., & Andrady, A. (2019) · Palgrave Communications · doi:10.1057/s41599-018-0212-7 · Cited by 2,327
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
When will fossil fuel reserves be diminished?
Shafiee, S., & Topal, E. (2008) · Energy Policy · doi:10.1016/j.enpol.2008.08.016 · Cited by 2,164
Evidence that the Great Pacific Garbage Patch is rapidly accumulating plastic
Lebreton, L., Slat, B., Ferrari, F., Sainte-Rose, B., Aitken, J., Marthouse, R., Hajbane, S., Cunsolo, S., Schwarz, A., Levivier, A., et al. (2018) · Scientific Reports · doi:10.1038/s41598-018-22939-w · Cited by 1,839
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
Haider, T. P., Völker, C., Kramm, J., Landfester, K., & Wurm, F. R. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201805766 · Cited by 1,658
Poly(lactic acid)—Mass production, processing, industrial applications, and end of life
Castro‐Aguirre, E., Iñiguez‐Franco, F., Samsudin, H., Fang, X., & Auras, R. A. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.010 · Cited by 1,391
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Our plastic age
Thompson, R. C., Swan, S. H., Moore, C. J., & vom Saal, F. S. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2009.0054 · Cited by 1,294
Biodegradation of bioplastics in natural environments
Emadian, S. M., Onay, T. T., & Demirel, B. (2016) · Waste Management · doi:10.1016/j.wasman.2016.10.006 · Cited by 1,249
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Why degradable polymers undergo surface erosion or bulk erosion
Burkersroda, F. V., Schedl, L., & Göpferich, A. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00170-9 · Cited by 1,146
Recent advances in lactic acid production by microbial fermentation processes
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2013) · Biotechnology Advances · doi:10.1016/j.biotechadv.2013.04.002 · Cited by 1,022
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700275 · Cited by 1,021
Stereocontrolled ring-opening polymerisation of lactide
Stanford, M. J., & Dove, A. P. (2009) · Chemical Society Reviews · doi:10.1039/b815104k · Cited by 891
Polylactic acid: Synthesis and biomedical applications
Singhvi, M. S., Zinjarde, S. S., & Gokhale, D. V. (2019) · Journal of Applied Microbiology · doi:10.1111/jam.14290 · Cited by 883
Chemically recyclable polymers: a circular economy approach to sustainability
Hong, M., & Chen, E. Y.-X. (2017) · Green Chemistry · doi:10.1039/c7gc01496a · Cited by 876
Stereocontrolled ring-opening polymerization of cyclic esters: synthesis of new polyester microstructures
Thomas, C. M. (2010) · Chem. Soc. Rev. · doi:10.1039/b810065a · Cited by 853
Lactic acid as a platform chemical in the biobased economy: the role of chemocatalysis
Dusselier, M., Wouwe, P. V., Dewaele, A., Makshina, E. V., & Sels, B. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00069a · Cited by 841
Biocompatible Initiators for Lactide Polymerization
Platel, R., Hodgson, L., & Williams, C. (2008) · Polymer Reviews · doi:10.1080/15583720701834166 · Cited by 706
Compostability of bioplastic packaging materials: An overview
Kale, G., Kijchavengkul, T., Auras, R., Rubino, M., Selke, S. E., & Singh, S. P. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600168 · Cited by 618
Thermal decomposition of biodegradable polyesters—II. Poly(lactic acid)
Kopinke, F.-D., Remmler, M., Mackenzie, K., Möder, M., & Wachsen, O. (1996) · Polymer Degradation and Stability · doi:10.1016/0141-3910(96)00102-4 · Cited by 614
Lactic acid production from lignocellulose-derived sugars using lactic acid bacteria: Overview and limits
Abdel-Rahman, M. A., Tashiro, Y., & Sonomoto, K. (2011) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2011.06.017 · Cited by 596
Ethyl lactate as a solvent: Properties, applications and production processes – a review
Pereira, C. S. M., Silva, V. M. T. M., & Rodrigues, A. E. (2011) · Green Chemistry · doi:10.1039/c1gc15523g · Cited by 544
Polylactides—Chemistry, Properties and Green Packaging Technology: A Review
Ahmed, J., & Varshney, S. K. (2010) · International Journal of Food Properties · doi:10.1080/10942910903125284 · Cited by 475
A roadmap towards green packaging: the current status and future outlook for polyesters in the packaging industry
Rabnawaz, M., Wyman, I., Auras, R. A., & Cheng, S. (2017) · Green Chemistry · doi:10.1039/c7gc02521a · Cited by 422
Biodegradability of polylactide bottles in real and simulated composting conditions
Kale, G., Auras, R., Singh, S. P., & Narayan, R. (2007) · Polymer Testing · doi:10.1016/j.polymertesting.2007.07.006 · Cited by 421
Performance indicators for a circular economy: A case study on post-industrial plastic waste
Huysman, S., Schaepmeester, J. D., Ragaert, K., Dewulf, J. P., & Meester, S. D. (2017) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2017.01.013 · Cited by 421
Present and future development in plastics from biomass
Shen, L., Worrell, E., & Patel, M. K. (2009) · Biofuels Bioproducts and Biorefining · doi:10.1002/bbb.189 · Cited by 418
New insights into the hydrolytic degradation of poly(lactic acid): participation of the alcohol terminus
de Jong, S. J., Arias, E. R., Rijkers, D. T. S., van Nostrum, C. F., den Bosch, J. J. K.-V., & Hennink, W. E. (2001) · Polymer · doi:10.1016/s0032-3861(00)00646-7 · Cited by 414
Fate of So‐Called Biodegradable Polymers in Seawater and Freshwater
Bagheri, A. R., Laforsch, C., Greiner, A., & Agarwal, S. (2017) · Global Challenges · doi:10.1002/gch2.201700048 · Cited by 411
Degradation studies of some polyesters and polycarbonates—2. Polylactide: Degradation under isothermal conditions, thermal degradation mechanism and photolysis of the polymer
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90035-7 · Cited by 404
A circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
Self-citation
Shape-selective zeolite catalysis for bioplastics production
Dusselier, M., Van Wouwe, P., Dewaele, A., Jacobs, P. A., & Sels, B. F. (2015) · Science · doi:10.1126/science.aaa7169 · Cited by 376
Molecular catalyst systems as key enablers for tailored polyesters and polycarbonate recycling concepts
Westhues, S., Idel, J., & Klankermayer, J. (2018) · Science Advances · doi:10.1126/sciadv.aat9669 · Cited by 348
Organocatalysis for depolymerisation
Jehanno, C., Pérez‐Madrigal, M. M., Demarteau, J., Sardón, H., & Dove, A. P. (2018) · Polymer Chemistry · doi:10.1039/c8py01284a · Cited by 337
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
Pillin, I., Montrelay, N., Bourmaud, A., & Grohens, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.12.005 · Cited by 289
Degradation behaviour of poly(lactic acid) films and fibres in soil under Mediterranean field conditions and laboratory simulations testing
Rudnik, E., & Briassoulis, D. (2011) · Industrial Crops and Products · doi:10.1016/j.indcrop.2010.12.031 · Cited by 272
Environmental degradation of biodegradable polyesters 1. Poly(ε-caprolactone), poly[(R)-3-hydroxybutyrate], and poly(L-lactide) films in controlled static seawater
Tsuji, H., & Suzuyoshi, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00240-3 · Cited by 260
Life Cycle Inventory and Impact Assessment Data for 2014 Ingeo ™ Polylactide Production
Vink, E. T. H., & Davies, S. (2015) · Industrial Biotechnology · doi:10.1089/ind.2015.0003 · Cited by 259
Biomedical Applications of Poly(Lactic Acid)
Pawar, R. P., Tekale, S. U., Shisodia, S. U., Totre, J. T., & Domb, A. J. (2014) · Recent Patents on Regenerative Medicine · doi:10.2174/2210296504666140402235024 · Cited by 252
Kinetics and Time−Temperature Equivalence of Polymer Degradation
Lyu, Schley, J., Loy, B., Lind, D., Hobot, C., Sparer, R., & Untereker, D. (2007) · Biomacromolecules · doi:10.1021/bm070313n · Cited by 237
Environmental degradation of biodegradable polyesters 2. Poly(ε-caprolactone), poly[(R)-3-hydroxybutyrate], and poly(L-lactide) films in natural dynamic seawater
Tsuji, H., & Suzuyoshi, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00239-7 · Cited by 232
The green solventethyl lactate: an experimental and theoretical characterization
Aparício, S., & Alcalde, R. (2008) · Green Chemistry · doi:10.1039/b811909k · Cited by 229
Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment
Zhao, P., Rao, C., Гу, Ф., Sharmin, N., & Fu, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.275 · Cited by 227
Controlled hydrogenative depolymerization of polyesters and polycarbonates catalyzed by ruthenium(ii) PNN pincer complexes
Krall, E. M., Klein, T. W., Andersen, R. J., Nett, A. J., Glasgow, R. W., Reader, D. S., Dauphinais, B. C., Mc Ilrath, S. P., Fischer, A. A., Carney, M. J., et al. (2014) · Chemical Communications · doi:10.1039/c4cc00541d · Cited by 224
Degradation studies of some polyesters and polycarbonates—1. Polylactide: General features of the degradation under programmed heating conditions
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90050-3 · Cited by 215
Impact of Bio-Based Plastics on Current Recycling of Plastics
Alaerts, L., Augustinus, M., & Acker, K. V. (2018) · Sustainability · doi:10.3390/su10051487 · Cited by 209
Recycling of biopolymers – The patent perspective
Niaounakis, M. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.02.027 · Cited by 208
Chemical Recycling of PLA: A Great Opportunity Towards the Sustainable Development?
Piemonte, V., Sabatini, S., & Gironi, F. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0608-9 · Cited by 204
Glycolysis of Poly(ethylene terephthalate) Catalyzed by the Lewis Base Ionic Liquid [Bmim][OAc]
Al-Sabagh, A. M., Yehia, F. Z., Eissa, A.-M. M. F., Moustafa, M. E., Eshaq, G., Rabie, A. M., & ElMetwally, A. E. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503677w · Cited by 204
Assessment of anaerobic degradation of Ingeo™ polylactides under accelerated landfill conditions
Kolstad, J. J., Vink, E. T. H., Wilde, B. D., & Debeer, L. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.003 · Cited by 200
Thermal degradation behaviour of poly(lactic acid) stereocomplex
Fan, Y., Nishida, H., Shirai, Y., Tokiwa, Y., & Endo, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.03.001 · Cited by 199
Acid- and base-catalyzed hydrolyses of aliphatic polycarbonates and polyesters
Jung, J. H., Ree, M., & Kim, H. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.060 · Cited by 194
Influence of residual monomers and metals on poly (l-lactide) thermal stability
Cam, D., & Marucci, M. (1997) · Polymer · doi:10.1016/s0032-3861(96)00711-2 · Cited by 191
Kinetics of the hydrolytic degradation of poly(lactic acid)
Codari, F., Lazzari, S., Soos, M., Storti, G., Morbidelli, M., & Moscatelli, D. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.026 · Cited by 184
Lactide Synthesis and Chirality Control for Polylactic acid Production
Wouwe, P. V., Dusselier, M., Vanleeuw, E., & Sels, B. F. (2016) · ChemSusChem · doi:10.1002/cssc.201501695 · Cited by 184
Solvothermal Alcoholysis Routes for Recycling Polylactide Waste as Lactic Acid Esters
Petrus, R., Bykowski, D., & Sobota, P. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01009 · Cited by 181
Effect of tin on poly(l-lactic acid) pyrolysis
Nishida, H., Mori, T., Hoshihara, S., Fan, Y., Shirai, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00152-6 · Cited by 176
A New Strategy for Recycling and Preparation of Poly( l -lactic acid): Hydrolysis in the Melt
Tsuji, H., Daimon, H., & Fujie, K. (2003) · Biomacromolecules · doi:10.1021/bm034060j · Cited by 174
Recent Trends in Green and Sustainable Chemistry & Waste Valorisation: Rethinking Plastics in a circular economy
Kaur, G., Uisan, K., Ong, K. L., & Lin, C. S. K. (2017) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2017.11.003 · Cited by 173
Commercial plastics claiming biodegradable status: Is this also accurate for marine environments?
Nazareth, M. C., Marques, M. R. D. C., Leite, M. C. A. M., & Castro, Í. B. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.12.052 · Cited by 170
Depolymerization of Waste Plastics to Monomers and Chemicals Using a Hydrosilylation Strategy Facilitated by Brookhart’s Iridium(III) Catalyst
Monsigny, L., Berthet, J. ‐., & Cantat, T. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01842 · Cited by 169
The selective recycling of mixed plastic waste of polylactic acid and polyethylene terephthalate by control of process conditions
Carné‐Sánchez, A., & Collinson, S. R. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.07.013 · Cited by 168
Thermal degradation of poly(l-lactide): effect of alkali earth metal oxides for selective l,l-lactide formation
Fan, Y., Nishida, H., Mori, T., Shirai, Y., & Endo, T. (2004) · Polymer · doi:10.1016/j.polymer.2003.12.058 · Cited by 168
Poly(lactic acid) Degradation into Methyl Lactate Catalyzed by a Well-Defined Zn(II) Complex
Román‐Ramírez, L. A., McKeown, P., Jones, M. D., & Wood, J. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b04863 · Cited by 168
Self-citation
Mechanical recycling of polylactide, upgrading trends and combination of valorization techniques
Badia-Valiente, J. D., & Ribes-Greus, A. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.09.005 · Cited by 161
Chain-end scission in acid catalyzed hydrolysis of poly (d,l-lactide) in solution
Shih, C. (1995) · Journal of Controlled Release · doi:10.1016/0168-3659(94)00100-9 · Cited by 159
Concurrent solvent induced crystallization and hydrolytic degradation of PLA by water-ethanol solutions
Iñiguez-Franco, F., Auras, R., Burgess, G., Holmes, D., Fang, X., Rubino, M., & Soto-Valdez, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.018 · Cited by 159
Thermal degradation of poly-l-lactide—studies on kinetics, modelling and melt stabilisation
Wachsen, O., Platkowski, K., & Reichert, K.-H. (1997) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00226-1 · Cited by 158
Kinetics of Hydrolytic Degradation of PLA
Piemonte, V., & Gironi, F. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0547-x · Cited by 152
Hydrolytic degradation of oligo(lactic acid): a kinetic and mechanistic study
van Nostrum, C. F., Veldhuis, T. F. J., Bos, G. W., & Hennink, W. E. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.001 · Cited by 150
Transforming polylactide into value‐added materials
Leibfarth, F. A., Moreno, N., Hawker, A. P., & Shand, J. D. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26303 · Cited by 139
Room Temperature Organocatalyzed Reductive Depolymerization of Waste Polyethers, Polyesters, and Polycarbonates
Féghali, E., & Cantat, T. (2015) · ChemSusChem · doi:10.1002/cssc.201500054 · Cited by 139
Group 4 salalen complexes for the production and degradation of polylactide
Whitelaw, E. L., Davidson, M. G., & Jones, M. D. (2011) · Chemical Communications · doi:10.1039/c1cc13910j · Cited by 128
Self-citation
Pyrolysis kinetics of poly(l-lactide) with carboxyl and calcium salt end structures
Fan, Y., Nishida, H., Hoshihara, S., Shirai, Y., Tokiwa, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00374-9 · Cited by 124
Dioxomolybdenum complex as an efficient and cheap catalyst for the reductive depolymerization of plastic waste into value-added compounds and fuels
Nunes, B. F. S., Oliveira, M. C., & Fernandes, A. C. (2020) · Green Chemistry · doi:10.1039/c9gc04206g · Cited by 121
Effect of small amounts of poly(lactic acid) on the recycling of poly(ethylene terephthalate) bottles
La Mantia, F. P., Botta, L., Morreale, M., & Scaffaro, R. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.10.017 · Cited by 118
Effect of simulated mechanical recycling processes on the structure and properties of poly(lactic acid)
Beltrán, F. R., Lorenzo, V., Acosta, J., de la Orden, M. U., & Urreaga, J. M. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.05.020 · Cited by 115
Hydrolysis of polylactide in aqueous media
Rodriguez, E. J., Marcos, B., & Huneault, M. A. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44152 · Cited by 110
On replacing single-use plastic with so-called biodegradable ones: The case with straws
Viera, J. S. C., Marques, M. R. D. C., Nazareth, M. C., Jimenez, P. C., & Castro, Í. B. (2020) · Environmental Science & Policy · doi:10.1016/j.envsci.2020.02.007 · Cited by 110
Thermal Degradation Processes of End-Capped Poly( l -lactide)s in the Presence and Absence of Residual Zinc Catalyst
Abe, H., Takahashi, N., Kim, K. J., Mochizuki, M., & Doi, Y. (2004) · Biomacromolecules · doi:10.1021/bm0497872 · Cited by 106
Methanolysis of poly(lactic acid) (PLA) catalyzed by ionic liquids
Song, X., Zhang, X., Wang, H., Liu, F., Yu, S., & Liu, S. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.10.012 · Cited by 105
Versatile Imidazole-Anion-Derived Ionic Liquids with Unparalleled Activity for Alcoholysis of Polyester Wastes under Mild and Green Conditions
Liu, M., Guo, J., Gu, Y., Gao, J., & Liu, F. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03591 · Cited by 104
Organocatalytic chain scission of poly(lactides): a general route to controlled molecular weight, functionality and macromolecular architecture.
Nederberg, F., Connor, E. F., Glausser, T., & Hedrick, J. L. (2001) · Chemical Communications · doi:10.1039/b106125a · Cited by 102
Catalytic Gas‐Phase Production of Lactide from Renewable Alkyl Lactates
Clercq, R. D., Dusselier, M., Makshina, E. V., & Sels, B. F. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711446 · Cited by 102
Biodegradability of injection molded bioplastic pots containing polylactic acid and poultry feather fiber
Ahn, H., Huda, M. S., Smith, M. C., Mulbry, W. W., Schmidt, W., & Reeves, J. B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.01.042 · Cited by 101
Efficient chemometric strategies for PET–PLA discrimination in recycling plants using hyperspectral imaging
Ulrici, A., Serranti, S., Ferrari, C., Cesare, D., Foca, G., & Bonifazi, G. (2013) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2013.01.001 · Cited by 100
Synthesis of Lactide from Alkyl Lactate via a Prepolymer Route
Upare, P. P., Hwang, Y. K., Chang, J.-S., & Hwang, D. W. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202714n · Cited by 99
The ecotoxicity and the biodegradability of lactic acid, alkyl lactate esters and lactate salts
Bowmer, C. T., Hooftman, R. N., Hanstveit, A. O., Venderbosch, P. W. M., & van der Hoeven, N. (1998) · Chemosphere · doi:10.1016/s0045-6535(98)00116-7 · Cited by 97
Comparative study on hydrolytic degradation and monomer recovery of poly(l-lactic acid) in the solid and in the melt
Tsuji, H., Saeki, T., Tsukegi, T., Daimon, H., & Fujie, K. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.06.009 · Cited by 96
Biodegradable poly(lactic acid)-based scaffolds: synthesis and biomedical applications
Ghalia, M. A., & Dahman, Y. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1227-2 · Cited by 96
Titania-Silica Catalysts for Lactide Production from Renewable Alkyl Lactates: Structure–Activity Relations
Clercq, R. D., Dusselier, M., Poleunis, C., Debecker, D. P., Giebeler, L., Oswald, S., Makshina, E. V., & Sels, B. F. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b02216 · Cited by 96
Dinuclear Zinc–N-Heterocyclic Carbene Complexes for Either the Controlled Ring-Opening Polymerization of Lactide or the Controlled Degradation of Polylactide Under Mild Conditions
Fliedel, C., Vila‐Viçosa, D., Calhorda, M. J., Dagorne, S., & Avilés, T. (2014) · ChemCatChem · doi:10.1002/cctc.201301015 · Cited by 95
Feedstock Recycling of Flame-Resisting Poly(lactic acid)/Aluminum Hydroxide Composite to l , l -lactide
Nishida, H., Fan, Y., Mori, T., Oyagi, N., Shirai, Y., & Endo, T. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie049208+ · Cited by 94
Beyond Biodegradability of Poly(lactic acid): Physical and Chemical Stability in Humid Environments
Rocca-Smith, J. R., Whyte, O., Brachais, C., Champion, D., Piasente, F., Marcuzzo, E., Sensidoni, A., Debeaufort, F., & Karbowiak, T. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b03088 · Cited by 93
Towards green membranes: preparation of cellulose acetate ultrafiltration membranes using methyl lactate as a biosolvent
Medina‐González, Y., Aimar, P., Lahitte, J., & Remigy, J. (2010) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2010.497230 · Cited by 88
Green preparation process using methyl lactate for cellulose-acetate-based nanofiltration membranes
Rasool, M. A., Goethem, C. V., & Vankelecom, I. F. J. (2019) · Separation and Purification Technology · doi:10.1016/j.seppur.2019.115903 · Cited by 85
Evaluation of kinetics parameters for poly(l-lactic acid) hydrolysis under high-pressure steam
Adnan, A. F. M., Nishida, H., & Shirai, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.022 · Cited by 82
Zinc Complexes for PLA Formation and Chemical Recycling: Towards a Circular Economy
McKeown, P., Román‐Ramírez, L. A., Bates, S., Wood, J., & Jones, M. D. (2019) · ChemSusChem · doi:10.1002/cssc.201902755 · Cited by 82
Self-citation
Highly active Mg( ii ) and Zn( ii ) complexes for the ring opening polymerisation of lactide
McKeown, P., McCormick, S. N., Mahon, M. F., & Jones, M. D. (2018) · Polymer Chemistry · doi:10.1039/c8py01369a · Cited by 81
Self-citation
Ten inconvenient questions about plastics in the sea
Bonanno, G., & Orlando‐Bonaca, M. (2018) · Environmental Science & Policy · doi:10.1016/j.envsci.2018.04.005 · Cited by 79
Effects of chain end structures on pyrolysis of poly(-lactic acid) containing tin atoms
MORI, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.11.008 · Cited by 76
Biopolymers in the Existing Postconsumer Plastics Recycling Stream
Cornell, D. D. (2007) · Journal of Polymers and the Environment · doi:10.1007/s10924-007-0077-0 · Cited by 73
Chemical recycling of poly(lactic acid) by water-ethanol solutions
Iñiguez‐Franco, F., Auras, R. A., Dolan, K. D., Selke, S. E. M., Holmes, D., Rubino, M. I., & Soto‐Valdez, H. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.01.016 · Cited by 72
Control of racemization for feedstock recycling of PLLA
Fan, Y., Nishida, H., Shirai, Y., & Endo, T. (2003) · Green Chemistry · doi:10.1039/b304792j · Cited by 71
Mono- and dimeric zinc( ii ) complexes for PLA production and degradation into methyl lactate – a chemical recycling method
Payne, J., McKeown, P., Mahon, M. F., Emanuelsson, E. A. C., & Jones, M. D. (2020) · Polymer Chemistry · doi:10.1039/d0py00192a · Cited by 70
Self-citation
Inside Back Cover: Dinuclear Zinc–N‐Heterocyclic Carbene Complexes for Either the Controlled Ring‐Opening Polymerization of Lactide or the Controlled Degradation of Polylactide Under Mild Conditions (ChemCatChem 5/2014)
Fliedel, C., Vila‐Viçosa, D., Calhorda, M. J., Dagorne, S., & Avilés, T. (2014) · ChemCatChem · doi:10.1002/cctc.201490032 · Cited by 69
Depolymerization of End‐of‐Life Poly(lactide) via 4‐Dimethylaminopyridine‐Catalyzed Methanolysis
Alberti, C., Damps, N., Meißner, R. R. R., & Enthaler, S. (2019) · ChemistrySelect · doi:10.1002/slct.201901316 · Cited by 67
Hydrolysis of poly(lactic acid) into calcium lactate using ionic liquid [Bmim][OAc] for chemical recycling
Song, X., Wang, H., Xuequn, Y., Liu, F., Yu, S., & Liu, S. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.020 · Cited by 66
Lewis Acidic Ionic Liquid [Bmim]FeCl4 as a High Efficient Catalyst for Methanolysis of Poly (lactic acid)
Liu, H., Zhao, R., Song, X., Liu, F., Yu, S., Liu, S., & Ge, X. (2017) · Catalysis Letters · doi:10.1007/s10562-017-2138-x · Cited by 66
The Nature of Plastics and Their Societal Usage
Millet, H., Vangheluwe, P., Block, C., Sevenster, A., Garcia, L., & Antonopoulos, R. (2018) · Royal Society of Chemistry eBooks · doi:10.1039/9781788013314-00001 · Cited by 65
Hydrolytic Degradation
Tsuji, H. (2010) · Wiley eBooks · doi:10.1002/9780470649848.ch21 · Cited by 65
Enzymatic, Alkaline, and Autocatalytic Degradation of Poly( l -lactic acid): Effects of Biaxial Orientation
Tsuji, H., Ogiwara, M., Saha, S. K., & Sakaki, T. (2005) · Biomacromolecules · doi:10.1021/bm0507453 · Cited by 62
Modeling the pH-dependent PLA oligomer degradation kinetics
Lazzari, S., Codari, F., Storti, G., Morbidelli, M., & Moscatelli, D. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.08.012 · Cited by 61
Pyrolysis mechanism of Poly(lactic acid) for giving lactide under the catalysis of tin
Feng, L., Feng, S., Bian, X., Li, G., & Chen, X. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.10.008 · Cited by 61
Kinetics of Methyl Lactate Formation from the Transesterification of Polylactic Acid Catalyzed by Zn(II) Complexes
Román‐Ramírez, L. A., McKeown, P., Jones, M. D., & Wood, J. (2020) · ACS Omega · doi:10.1021/acsomega.0c00291 · Cited by 61
Self-citation
Ferric chloride as an efficient and reusable catalyst for methanolysis of poly(lactic acid) waste
Liu, H., Song, X., Liu, F., Liu, S., & Yu, S. (2015) · Journal of Polymer Research · doi:10.1007/s10965-015-0783-6 · Cited by 58
Lactic Acid Production by Hydrolysis of Poly(Lactic Acid) in Aqueous Solutions: An Experimental and Kinetic Study
Piemonte, V., & Gironi, F. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0468-8 · Cited by 58
Zn-Acetate-Containing ionic liquid as highly active catalyst for fast and mild methanolysis of Poly(lactic acid)
Song, X., Bian, Z., Hui, Y., Wang, H., Liu, F., & Yu, S. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.108937 · Cited by 58
Alcoholysis of Poly(l-lactic acid) under microwave irradiation
Hirao, K., Nakatsuchi, Y., & Ohara, H. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.03.027 · Cited by 57
Design of a heterogeneous catalytic process for the continuous and direct synthesis of lactide from lactic acid
Upare, P. P., Yoon, J. W., Hwang, D. W., Lee, U., Hwang, Y. K., Hong, D., Kim, J. C., Lee, J. H., Kwak, S. K., Shin, H., et al. (2016) · Green Chemistry · doi:10.1039/c6gc02405j · Cited by 54
Chemical recycling of poly(lactic acid) via controlled degradation with protic (macro)molecules
Plichta, A., Lisowska, P., Kundys, A., Zychewicz, A., Dębowski, M., & Florjańczyk, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.006 · Cited by 53
Tin( ii ) 2-ethylhexanoate catalysed methanolysis of end-of-life poly(lactide)
Hofmann, M., Alberti, C., Scheliga, F., Meißner, R. R. R., & Enthaler, S. (2020) · Polymer Chemistry · doi:10.1039/d0py00292e · Cited by 51
Facile synthesis of DBU-based protic ionic liquid for efficient alcoholysis of waste poly(lactic acid) to lactate esters
Liu, F., Guo, J., Zhao, P., Gu, Y., Gao, J., & Liu, M. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.06.028 · Cited by 50
One-step synthesis of stereo-pure l,l lactide from l-lactic acid
Ghadamyari, M., Chaemchuen, S., Zhou, K., Dusselier, M., Sels, B. F., Mousavi, B., & Verpoort, F. (2018) · Catalysis Communications · doi:10.1016/j.catcom.2018.06.003 · Cited by 49
Hydrolytic degradation behavior of stereo multiblock and diblock poly(lactic acid)s: Effects of block lengths
Rahaman, M. H., & Tsuji, H. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.025 · Cited by 48
Selective Degradation of End‐of‐Life Poly(lactide) via Alkali‐Metal‐Halide Catalysis
Alberti, C., Damps, N., Meißner, R. R. R., Hofmann, M., Rijono, D., & Enthaler, S. (2019) · Advanced Sustainable Systems · doi:10.1002/adsu.201900081 · Cited by 47
Synthesis and Characterization of Yttrium and Ytterbium Complexes Supported by Salen Ligands and Their Catalytic Properties for rac-Lactide Polymerization
Gu, W., Xu, P., Wang, Y., Yao, Y., Yuan, D., & Shen, Q. (2015) · Organometallics · doi:10.1021/acs.organomet.5b00223 · Cited by 46
Thermal degradation of poly(l-lactide): Accelerating effect of residual DBU-based organic catalysts
Coulembier, O., Moins, S., Raquez, J., Meyer, F., Mespouille, L., Duquesne, E., & Dúbois, P. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.02.014 · Cited by 45
Ethyl Lactate: A Green Solvent for Olefin Metathesis
Planer, S., Jana, A., & Grela, K. (2019) · ChemSusChem · doi:10.1002/cssc.201901735 · Cited by 41
PLA Chemical Recycling Process Optimization: PLA Solubilization in Organic Solvents
Gironi, F., Frattari, S., & Piemonte, V. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0777-4 · Cited by 38
Design and Evaluation of Sustainable Lactide Production Process with an One-Step Gas Phase Synthesis Route
Heo, S., Park, H. W., Lee, J. H., & Chang, Y. K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06383 · Cited by 34
Degradation of Post-consumer PLA: Hydrolysis of Polymeric Matrix and Oligomers Stabilization in Aqueous Phase
Annesini, M. C., Frattari, S., Gironi, F., Piemonte, V., Sabia, R., & Claudio, V. (2018) · Journal of Polymers and the Environment · doi:10.1007/s10924-018-1312-6 · Cited by 33
Ligands and complexes based on piperidine and their exploitation of the ring opening polymerisation of rac-lactide
McKeown, P., Brown-Humes, J., Davidson, M. G., Mahon, M. F., Woodman, T. J., & Jones, M. D. (2017) · Dalton Transactions · doi:10.1039/c7dt00751e · Cited by 32
Self-citation
Well-controlled, zinc-catalyzed synthesis of low molecular weight oligolactides by ring opening reaction
Jędrzkiewicz, D., Czeluśniak, I., Wierzejewska, M., Szafert, S., & Ejfler, J. (2014) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2014.10.007 · Cited by 30
Ruthenium‐Catalyzed Hydrogenative Degradation of End‐of‐Life Poly(lactide) to Produce 1,2‐Propanediol as Platform Chemical
Kindler, T., Alberti, C., Fedorenko, E., Santangelo, N., & Enthaler, S. (2020) · ChemistryOpen · doi:10.1002/open.202000050 · Cited by 29
Hydrolysis of poly(l-lactic acid) using microwave irradiation
Hirao, K., Shimamoto, Y., Nakatsuchi, Y., & Ohara, H. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.10.003 · Cited by 27
Computational Study on the Properties and Structure of Methyl Lactate
Aparício, S. (2007) · The Journal of Physical Chemistry A · doi:10.1021/jp070841t · Cited by 26
Optimization of electrically conductive films: Poly(3-methylthiophene) or polypyrrole in Kapton
Meador, M. A. B., Hardy-Green, D., Auping, J. V., Gaier, J. R., Ferrara, L. A., Papadopoulos, D. S., Smith, J. W., & Keller, D. J. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970214)63:7 · Cited by 21
Industrial Composting of Poly(Lactic Acid) Bottles
Danyluk, C., Erickson, R., Burrows, S., & Auras, R. A. (2010) · Journal of Testing and Evaluation · doi:10.1520/jte102685 · Cited by 19
Preparation of Methyl Lactate.
Filachione, E. M., Lengel, J. H., & Fisher, C. H. (1945) · Industrial & Engineering Chemistry · doi:10.1021/ie50424a024 · Cited by 19
Propane‐1,2‐diols from Dilactides, Oligolactides, or Poly‐ L ‐lactic Acid (PLLA): From Plastic Waste to Chiral Bulk Chemicals
Shuklov, I. A., Dubrovina, N. V., Schulze, J., Tietz, W., Kühlein, K., & Börner, A. (2014) · Chemistry - A European Journal · doi:10.1002/chem.201302004 · Cited by 8

Research works printed but not linked: 2

Ho, 1999, Field exposure study of polylactic acid (PLA) plastic films in the banana fields of Costa Rica, J. Environ. Polym. Degrad., 7, 167, 10.1023/A:1022849813748 · DOI
Siparsky, 1998, Hydrolysis of polylactic acid (PLA) and polycaprolactone (PCL) in aqueous acetonitrile solutions: Autocatalysis, J. Environ. Polym. Degrad., 6, 31, 10.1023/A:1022826528673 · DOI

Sorted by citations

The Chemical Recycling of Polyesters for a Circular Plastics Economy: Challenges and Emerging Opportunities
Payne, J., & Jones, M. D. (2021) · ChemSusChem · doi:10.1002/cssc.202100400 · Cited by 439
Self-citation
Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy
Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y. ‐. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 429
Recent advances in biodegradable polymers – Properties, applications and future prospects
Mukherjee, C., Varghese, D., Krishna, J. S., Boominathan, T., Rakeshkumar, R., Dineshkumar, S., Rao, C. V. S. B., & Sivaramakrishna, A. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112068 · Cited by 341
Marine Environmental Plastic Pollution: Mitigation by Microorganism Degradation and Recycling Valorization
Oliveira, J., Belchior, A., da Silva, V. D., Rotter, A., Petrovski, Ž., Almeida, P. L., Lourenço, N. D., & Gaudêncio, S. P. (2020) · Frontiers in Marine Science · doi:10.3389/fmars.2020.567126 · Cited by 262
Mechanical, chemical, and bio-recycling of biodegradable plastics: A review
Kumar, R., Sadeghi, K., Jang, J., & Seo, J. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.163446 · Cited by 239

See all 294

Authors: McKeown, P., & Jones, M. D.
Affiliations: University of Bath (GB)
Corresponding author: McKeown, Paul
Jones, Matthew D.
ORCID: McKeown, Paul
Jones, Matthew D.
Venue: Sustainable Chemistry
Publisher: MDPI AG
Published: 2020-05-02
Volume: 1
Issue: 1
Pages: 1-22
ISSN: 2673-4079 (ISSN-L)
DOI: 10.3390/suschem1010001
OpenAlex: W3021978864
Cited by: 294
References: 150
Citations by year: 2026: 41 · 2025: 66 · 2024: 49 · 2023: 67 · 2022: 49 · 2021: 19 · 2020: 3
FWCI: 2.31
Type: journal article
Language: en
Open access: gold
dx.doi.org
Licence: cc-by
creativecommons.org/licenses/by/4.0/ (vor)
Locations: Sustainable Chemistry (publishedVersion, cc-by)
Funders: Engineering and Physical Sciences Research Council (EP/P016405/1)
Topics: Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Physical Sciences › Environmental Science › Waste Management and Disposal › Waste Management and Recycling
Keywords: polylactic acid, chemical recycling, bio-based polymers, biodegradable plastics, monomer recovery, circular economy, plastic waste, end-of-life plastics, composting, biodegradation

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

The Chemical Recycling of PLA: A Review

Abstract

Overview

Integrity signals

Verification

Claims the paper makes

Claims other papers make about this one

Self-check

Citations

Cites

Cited by

Related

Metadata

Record

About these checks