CoChat

Cell Disruption and Pressurized Liquid Extraction of Carotenoids from Microalgae

Taucher, Josef, Baer, Sascha · 2016 · Journal of Thermodynamics & Catalysis
Cited by 47

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Abstract

Microalgae are very promising organisms for the production of high-value compounds such as carotenoids. Nevertheless, their commercial use is so far hampered by the lack of efficient processes and currently feasible for very few strains. One of the most relevant factors is the high effort for downstream processing, e.g., cell disruption and extraction. Thus, the presented studies were dedicated to investigate and optimize these two steps for carotenoid production with microalgae. Six different cell disruption techniques (high pressure homogenizer, ball mill, Ultra Turrax, repeated freeze and thaw, freeze-drying, ultra-sonication) were compared in lab scale for three species: Haemotococcus pluvialis, Chromochloris zofingiensis and Chlorella sorokiniana. The carotenoid recovery was determined via HPLC-UV/Vis after pressurized solvent extraction. Furthermore, factors influencing the applied extraction methods such as solvent, temperature, duration and number of cycles were optimized in order to reach highest recovery rates. While rough mechanical methods such as ball mill and high pressure homogenizer showed the highest effectivity for cell disruption of all three investigated strains, the influence of non-mechanical methods - i.e., repeated freeze and thaw cycles - on the efficiency of the extraction of astaxanthin, lutein and β carotene increased reversely proportional to cell size and cell wall rigidity. For H. pluvialis repeated freezing and thawing resulted in a factor 240 times lower extraction yield compared to high pressure homogenizer, while both methods were comparable for C. sorokiniana. From six tested solvents, dichloromethane resulted in the highest carotene recovery yield, three times higher in comparison to n-hexane. Variation of the extraction temperature from room temperature to 120°C showed an optimum at 60°C. Nearly complete extraction was reached after one cycle of 10 minutes. The data presented here demonstrate the necessity of lab scale optimization of cell disruption and extraction process for future upscaling

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.4172/2157-7544.1000158

Cites

15 of 15 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 15 references

Cited by

Metadata

Authors
Taucher, J., & Baer, S.
Venue
Journal of Thermodynamics & Catalysis
Published
2016
Volume
07
Issue
01
ISSN
2157-7544 (ISSN-L)
OpenAlex
W2347032566
Cited by
47
References
15
FWCI
1.07
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.