Poly(Lactic Acid)
The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid) (PLA) is a bio-based biodegradable polymer that can be produced from renewable resources including starch from corn and potatoes, sugar from beets and sugar cane, and so forth. The carbon in PLA originates from atmospheric carbon dioxide, which is immobilized in glucose by photosynthesis; therefore, the carbon dioxide formed by its disposal, incineration, or biodegradation does not increase the total amount of atmospheric carbon dioxide. Poly(lactic acid) and its copolymers have attracted significant attention in environmental, biomedical, and pharmaceutical applications and as alternatives to petro-based polymers. Among their applications as alternatives to petro-based polymers, packing applications are the primary one. Most commercially available poly(L-lactic acid) (PLLA) is used for packaging, automobile interiors, electronics chassis and other consumer products. However, some applications require a higher mechanical performance and resistance to hydrolytic/thermal degradation. In addition to composite or fiber-reinforced plastic formation, stereocomplexation between enantiomeric PLLA and poly(D-lactic acid) is a promising method for producing high-performance PLA-based materials because it has been shown to enhance the mechanical performance and resistance to hydrolytic/thermal degradation of PLA-based materials. The physical properties, hydrolytic degradation, and biodegradation of PLA can be controlled by altering, for instance, their molecular and higher ordered structures. This chapter outlines the basic aspects of synthesis, processing, structures, physical properties, degradation and applications of PLA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
Jamshidian, M., Tehrany, E. A., Imran, M., Jacquot, M., & Desobry, S. (2010) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2010.00126.x · Cited by 1,557
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Self-citationPoly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Biodegradable polymers for use in surgery—polyglycolic/poly(actic acid) homo- and copolymers: 1
Gilding, D. K., & Reed, A. M. (1979) · Polymer · doi:10.1016/0032-3861(79)90009-0 · Cited by 1,345
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Self-citationMathew, A. P., Oksman, K., & Sain, M. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.21779 · Cited by 851
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Biodegradability and biodegradation of poly(lactide)
Tokiwa, Y., & Calabia, B. P. (2006) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-006-0488-1 · Cited by 665
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Structure and thermal properties of poly(lactic acid)/cellulose whiskers nanocomposite materials
Petersson, L., Kvien, I., & Oksman, K. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.12.012 · Cited by 576
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite
Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90035-7 · Cited by 404
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Self-citationTsuji, H., & Ikada, Y. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(99)00111-1 · Cited by 329
Self-citationAjioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322
Helix Distortion and Crystal Structure of the α-Form of Poly(l-lactide)
Sasaki, S., & Asakura, T. (2003) · Macromolecules · doi:10.1021/ma0348674 · Cited by 296
Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)
Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296
Crystallization behavior of poly(l-lactic acid)
Di Lorenzo, M. L. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.10.020 · Cited by 295
Copinet, A., Bertrand, C., Govindin, S., Coma, V., & Couturier, Y. (2004) · Chemosphere · doi:10.1016/j.chemosphere.2003.11.038 · Cited by 288
Water vapor permeability of biodegradable polymers
Shogren, R. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763592 · Cited by 287
Enthalpy Relaxation and Embrittlement of Poly( l -lactide) during Physical Aging
Pan, P., Zhu, B., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071737c · Cited by 282
Effect of the addition of poly (D-lactic acid) on the thermal property of poly (L-lactic acid)
Yamane, H., & Sasai, K. (2003) · Polymer · doi:10.1016/s0032-3861(03)00092-2 · Cited by 266
Tsuji, H., & Suzuyoshi, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00240-3 · Cited by 260
Self-citationWasanasuk, K., Tashiro, K., Hanesaka, M., Ohhara, T., Kurihara, K., Kuroki, R., Tamada, T., Ozeki, T., & Kanamoto, T. (2011) · Macromolecules · doi:10.1021/ma2006624 · Cited by 257
Pluta, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.09.057 · Cited by 247
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245
Synthesis of polylactides with different molecular weights
Hyon, S.-H., Jamshidi, K., & Ikada, Y. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00076-8 · Cited by 237
Tsuji, H., & Suzuyoshi, K. (2002) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00239-7 · Cited by 232
Self-citationStereocomplex formation between enantiomeric poly(lactic acid)s. 6. Binary blends from copolymers
Tsuji, H., & Ikada, Y. (1992) · Macromolecules · doi:10.1021/ma00047a024 · Cited by 228
Self-citationTsuji, H., & Miyauchi, S. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00191-9 · Cited by 204
Self-citationMelting behavior and crystallization kinetics of starch and poly(lactic acid) composites
Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200
Acid- and base-catalyzed hydrolyses of aliphatic polycarbonates and polyesters
Jung, J. H., Ree, M., & Kim, H. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.060 · Cited by 194
Biodegradable Poly(Lactic Acid): Synthesis, Modification, Processing and Applications
Ren, J. (2010) · doi:10.1007/978-3-642-17596-1 · Cited by 190
Chain-end scission in acid catalyzed hydrolysis of poly (d,l-lactide) in solution
Shih, C. (1995) · Journal of Controlled Release · doi:10.1016/0168-3659(94)00100-9 · Cited by 159
Spinu, M., Jackson, C., Keating, M. Y., & Gardner, K. H. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608014922 · Cited by 158
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
Hydrolytic degradation of oligo(lactic acid): a kinetic and mechanistic study
van Nostrum, C. F., Veldhuis, T. F. J., Bos, G. W., & Hennink, W. E. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.001 · Cited by 150
Physical Properties, Crystallization, and Spherulite Growth of Linear and 3-Arm Poly(l-lactide)s
Tsuji, H., Miyase, T., Tezuka, Y., & Saha, S. K. (2005) · Biomacromolecules · doi:10.1021/bm049552q · Cited by 148
Self-citationTsuji, H. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00365-4 · Cited by 145
Self-citationYe, W. P., Du, F. S., Jin, W. H., Yang, J. Y., & Xu, Y. (1997) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(96)00081-8 · Cited by 142
Water vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity
Tsuji, H., Okino, R., Daimon, H., & Fujie, K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22698 · Cited by 136
Self-citationBouapao, L., Tsuji, H., Tashiro, K., Zhang, J., & Hanesaka, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.040 · Cited by 131
Self-citationRoles of Physical Aging on Crystallization Kinetics and Induction Period of Poly(l-lactide)
Pan, P., Liang, Z., Zhu, B., Dong, T., & Inoue, Y. (2008) · Macromolecules · doi:10.1021/ma801436f · Cited by 128
NODA, M., & OKUYAMA, H. (1999) · Chemical and Pharmaceutical Bulletin · doi:10.1248/cpb.47.467 · Cited by 121
Biodegradable PLA-PGA Polymers for Tissue Engineering in Orthopaedics
Agrawal, C. M., Athanasiou, K. A., & Heckman, J. D. (1997) · Materials Science Forum · doi:10.4028/www.scientific.net/msf.250.115 · Cited by 111
Synthesis of ABA triblock copolymers of iε-caprolactone and DL-lactide
Song, C. X., & Feng, X. D. (1984) · Macromolecules · doi:10.1021/ma00142a057 · Cited by 88
Morphological study of biodegradable PEO/PLA block copolymers
Younes, H., & Cohn, D. (1987) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820211103 · Cited by 82
Effects of chain end structures on pyrolysis of poly(-lactic acid) containing tin atoms
MORI, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.11.008 · Cited by 76
Tsuji, H., & Suzuki, M. (2001) · Sen'i Gakkaishi · doi:10.2115/fiber.57.198 · Cited by 46
Self-citation
Cited by
Properties and medical applications of polylactic acid: A review
Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.42 · Cited by 722
Weng, Y.-X., Jin, Y.-J., Meng, Q.-Y., Wang, L., Zhang, M., & Wang, Y.-Z. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.05.001 · Cited by 596
Elastomeric biomaterials for tissue engineering
Chen, Q., Liang, S., & Thouas, G. A. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.05.003 · Cited by 564
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Poly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Self-citation
Metadata
- Authors
- Tsuji, H.
- Venue
- Bio‐Based Plastics
- Publisher
- Wiley
- Published
- 2013-10-04
- Pages
- 171-239
- OpenAlex
- W1499104247
- Cited by
- 142
- References
- 63
- Type
- other
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.