The DOI matches its Crossref record; 160 of the 160 references it cites were found in a registry or an index.
A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
Open accessAbstract
Compared with stainless steel and Co–Cr‐based alloys, Ti and its alloys are widely used as biomedical implants due to many fascinating properties, such as superior mechanical properties, strong corrosion resistance, and excellent biocompatibility. After briefly introducing several most commonly used biomedical materials, this article reviews the recent development in Ti alloys and their biomedical applications, especially the low‐modulus β‐type Ti alloys and their design methods. This review also systemically investigates the recently attractive progress in preparation of biomedical Ti alloys, including additive manufacturing, porous powder metallurgy, and severe plastic deformation, applied in the manufacturing and the influenced microstructures and properties. Nevertheless, there are still some problems with the long‐term performance of Ti alloys, and therefore several surface modification methods are reviewed to further improve their biological activity, wear resistance, and corrosion resistance. Finally, the biocompatibility of Ti and its alloys is concluded. Summarizing the findings from literature, future prediction is also conducted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Projections of Primary and Revision Hip and Knee Arthroplasty in the United States from 2005 to 2030
Kurtz, S., Ong, K., Lau, E., Mowat, F., & Halpern, M. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200704000-00012 · Cited by 8,698
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416
Physical metallurgy of Ti–Ni-based shape memory alloys
Otsuka, K., & Ren, X. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2004.10.001 · Cited by 4,610
Principles of equal-channel angular pressing as a processing tool for grain refinement
Valiev, R. Z., & Langdon, T. G. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.003 · Cited by 4,135
Titanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
LIU, X., CHU, P., & DING, C. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.11.001 · Cited by 3,487
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
Thijs, L., Verhaeghe, F., Craeghs, T., Humbeeck, J. V., & Kruth, J.-P. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.02.004 · Cited by 2,929
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
A review on fundamentals and applications of electrophoretic deposition (EPD)
BESRA, L., & LIU, M. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.07.001 · Cited by 2,258
Munir, Z. A., Anselmi-Tamburini, U., & Ohyanagi, M. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-6555-2 · Cited by 2,257
Mechanical properties of biomedical titanium alloys
Niinomi, M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00806-x · Cited by 2,157
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
Vrancken, B., Thijs, L., Kruth, J.-P., & Van Humbeeck, J. (2012) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2012.07.022 · Cited by 1,896
Development of new metallic alloys for biomedical applications
Niinomi, M., Nakai, M., & Hieda, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.06.037 · Cited by 1,623
Navarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Recent metallic materials for biomedical applications
Niinomi, M. (2002) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-002-0109-2 · Cited by 1,508
Physical approaches to biomaterial design
Mitragotri, S., & Lahann, J. (2009) · Nature Materials · doi:10.1038/nmat2344 · Cited by 1,445
Fabrication methods of porous metals for use in orthopaedic applications
Ryan, G., Pandit, A., & Apatsidis, D. P. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.002 · Cited by 1,391
Enhanced functions of osteoblasts on nanophase ceramics
Webster, T. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00075-2 · Cited by 1,324
Design and mechanical properties of new β type titanium alloys for implant materials
Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00808-3 · Cited by 1,323
Gu, D., Hagedorn, Y.-C., Meiners, W., Meng, G., Batista, R. J. S., Wissenbach, K., & Poprawe, R. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.04.006 · Cited by 1,089
Material fundamentals and clinical performance of plasma‐sprayed hydroxyapatite coatings: A review
Sun, L., Berndt, C. C., Gross, K. A., & Kucuk, A. (2001) · Journal of Biomedical Materials Research · doi:10.1002/jbm.1056 · Cited by 1,065
New Developments of Ti-Based Alloys for Biomedical Applications
Li, Y., Yang, C., Zhao, H., Qu, S., Li, X., & Li, Y. (2014) · Materials · doi:10.3390/ma7031709 · Cited by 1,048
Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation
Rho, J.-Y., Tsui, T. Y., & Pharr, G. M. (1997) · Biomaterials · doi:10.1016/s0142-9612(97)00073-2 · Cited by 924
Human Population: The Next Half Century
Cohen, J. E. (2003) · Science · doi:10.1126/science.1088665 · Cited by 870
Comparison of metal release from various metallic biomaterials in vitro
Okazaki, Y., & Gotoh, E. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.005 · Cited by 862
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
The use of titanium for medical applications in the USA
Wang, K. (1996) · Materials Science and Engineering A · doi:10.1016/0921-5093(96)10243-4 · Cited by 851
Porous Metals and Metallic Foams: Current Status and Recent Developments
Lefebvre, L. ‐., Banhart, J., & Dunand, D. C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800241 · Cited by 846
Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
Parthasarathy, J., Starly, B., Raman, S., & Christensen, A. (2010) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2009.10.006 · Cited by 816
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Zhilyaev, A. P., Nurislamova, G. V., Kim, B.-K., Baró, M. D., Szpunar, J. A., & Langdon, T. G. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00466-4 · Cited by 797
Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo
Webster, T. J., & Ejiofor, J. U. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.12.002 · Cited by 793
Van Bael, S., Chai, Y. C., Truscello, S., Moesen, M., Kerckhofs, G., Van Oosterwyck, H., Kruth, J.-P., & Schrooten, J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.04.001 · Cited by 766
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
Attar, H., Calin, M., Zhang, L. C., Scudino, S., & Eckert, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.11.038 · Cited by 744
Self-citationBiocompatibility of Advanced Manufactured Titanium Implants—A Review
Sidambe, A. (2014) · Materials · doi:10.3390/ma7128168 · Cited by 741
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
Self-citationTan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
A new look at biomedical Ti-based shape memory alloys
Biesiekierski, A., Wang, J., Gepreel, M. A.-H., & Wen, C. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.018 · Cited by 688
Improved biological performance of Ti implants due to surface modification by micro-arc oxidation
Li, L.-H., Kong, Y.-M., Kim, H.-W., Kim, Y.-W., Kim, H.-E., Heo, S.-J., & Koak, J.-Y. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.048 · Cited by 676
Raphel, J., Holodniy, M., Goodman, S. B., & Heilshorn, S. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.016 · Cited by 674
Paital, S. R., & Dahotre, N. B. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.05.001 · Cited by 673
Zhao, X., Li, S., Zhang, M., Liu, Y., Sercombe, T. B., Wang, S., Hao, Y., Yang, R., & Murr, L. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.135 · Cited by 673
Yang, Y., Kim, K.-H., & Ong, J. L. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.029 · Cited by 667
Processing of biocompatible porous Ti and Mg
Wen, C. E., Mabuchi, M., Yamada, Y., Shimojima, K., Chino, Y., & Asahina, T. (2001) · Scripta Materialia · doi:10.1016/s1359-6462(01)01132-0 · Cited by 665
Biology of implant osseointegration.
Mavrogenis, A., Dimitriou, R. I., Parvizi, J., & Babis, G. C. (2009) · PubMed · Cited by 639
A review of bioactive glasses: Their structure, properties, fabrication and apatite formation
Kaur, G., Pandey, O. P., Singh, K., Homa, D., Scott, B., & Pickrell, G. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34690 · Cited by 628
Aging of bone tissue: mechanical properties.
Burstein, A. H., Reilly, D. T., & Martens, M. A. (1976) · PubMed · Cited by 614
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti–24Nb–4Zr–8Sn alloy
Zhang, L., Klemm, D., Eckert, J., Hao, Y., & Sercombe, T. B. (2011) · Scripta Materialia · doi:10.1016/j.scriptamat.2011.03.024 · Cited by 597
Self-citationAttar, H., Bönisch, M., Calin, M., Zhang, L.-C., Scudino, S., & Eckert, J. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.05.022 · Cited by 585
Self-citationLiu, Y. J., Li, S. J., Wang, H. L., Hou, W. T., Hao, Y. L., Yang, R., Sercombe, T. B., & Zhang, L. C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.04.029 · Cited by 584
Self-citationFunctionally graded materials for biomedical applications
Pompe, W., Worch, H., Epple, M., Friess, W., Gelinsky, M., Greil, P., Hempel, U., Scharnweber, D., & Schulte, K. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(03)00580-x · Cited by 575
Porous NiTi for bone implants: A review
Bansiddhi, A., Sargeant, T. D., Stupp, S. I., & Dunand, D. C. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.02.009 · Cited by 572
Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution
Dai, N., Zhang, L.-C., Zhang, J., Chen, Q., & Wu, M. (2016) · Corrosion Science · doi:10.1016/j.corsci.2015.10.041 · Cited by 570
Self-citationAging of bone tissue: mechanical properties
Burstein, A., Reilly, D., & Martens, M. (1976) · The Journal of Bone & Joint Surgery · doi:10.2106/00004623-197658010-00015 · Cited by 569
Mechanical properties of porous titanium compacts prepared by powder sintering
Oh, I.-H., Nomura, N., Masahashi, N., & Hanada, S. (2003) · Scripta Materialia · doi:10.1016/j.scriptamat.2003.08.018 · Cited by 569
Murr, L. E., Esquivel, E. V., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Martinez, E. Y., Medina, F., Hernandez, D. H., Martinez, E., Martinez, J. L., et al. (2009) · Materials Characterization · doi:10.1016/j.matchar.2008.07.006 · Cited by 564
Bessa, P. C., Casal, M., & Reis, R. L. (2008) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.74 · Cited by 549
Murr, L. E., Gaytan, S. M., Ceylan, A., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., Medina, F., Collins, S., et al. (2010) · Acta Materialia · doi:10.1016/j.actamat.2009.11.032 · Cited by 526
Biomedical applications of diamond‐like carbon coatings: A review
Roy, R. K., & Lee, K. (2007) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30768 · Cited by 496
Additive Manufacturing of Titanium Alloys by Electron Beam Melting: A Review
Zhang, L., Liu, Y., Li, S., & Hao, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700842 · Cited by 486
Self-citationChua, P.-H., Neoh, K.-G., Kang, E.-T., & Wang, W. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.019 · Cited by 483
Future Clinical and Economic Impact of Revision Total Hip and Knee Arthroplasty
Kurtz, S. M., Ong, K. L., Schmier, J., Mowat, F., Saleh, K., Dybvik, E., Kŝrrholm, J., Garellick, G., Havelin, L. I., Furnes, O., et al. (2007) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200710001-00015 · Cited by 477
Processing and biocompatibility evaluation of laser processed porous titanium
Xue, W., Krishna, B. V., Bandyopadhyay, A., & Bose, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.05.009 · Cited by 471
The influence of nano-scale surface roughness on bacterial adhesion to ultrafine-grained titanium
Truong, V. K., Lapovok, R., Estrin, Y. S., Rundell, S., Wang, J. Y., Fluke, C. J., Crawford, R. J., & Ivanova, E. P. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.071 · Cited by 438
The role of nanometer and sub-micron surface features on vascular and bone cell adhesion on titanium
Khang, D., Lu, J., Yao, C., Haberstroh, K. M., & Webster, T. J. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.11.009 · Cited by 437
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
Chlebus, E., Kuźnicka, B., Kurzynowski, T., & Dybała, B. (2011) · Materials Characterization · doi:10.1016/j.matchar.2011.03.006 · Cited by 423
Jin, G., Qin, H., Cao, H., Qian, S., Zhao, Y., Peng, X., Zhang, X., Liu, X., & Chu, P. K. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.074 · Cited by 406
Hydroxyapatite coating on titanium substrate with titania buffer layer processed by sol–gel method
Kim, H.-W., Koh, Y.-H., Li, L.-H., Lee, S., & Kim, H.-E. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2003.09.041 · Cited by 404
Future Clinical and Economic Impact of Revision Total Hip and Knee Arthroplasty
Kurtz, S. M., Ong, K. L., Schmier, J. K., et al. (2007) · Journal of Bone and Joint Surgery · doi:10.2106/jbjs.g.00587 · Cited by 404
de Formanoir, C., Michotte, S., Rigo, O., Germain, L., & Godet, S. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.11.052 · Cited by 404
Assessing the biocompatibility of NiTi shape memory alloys used for medical applications
Es-Souni, M., Es-Souni, M., & Fischer-Brandies, H. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2888-3 · Cited by 403
Prospects of microwave processing: An overview
Das, S., Mukhopadhyay, A. K., Datta, S., & Basu, D. (2009) · Bulletin of Materials Science · doi:10.1007/s12034-009-0001-4 · Cited by 400
Biomaterials by freeze casting
Wegst, U. G. K., Schecter, M., Donius, A. E., & Hunger, P. M. (2010) · Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rsta.2010.0014 · Cited by 375
Mei, S., Wang, H., Wang, W., Tong, L., Pan, H., Ruan, C., Ma, Q., Liu, M., Yang, H., Zhang, L., et al. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.005 · Cited by 368
Self-citationLiu, Y. J., Wang, H. L., Li, S. J., Wang, S. G., Wang, W. J., Hou, W. T., Hao, Y. L., Yang, R., & Zhang, L. C. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.052 · Cited by 368
Self-citationLi, S. J., Xu, Q. S., Wang, Z., Hou, W. T., Hao, Y. L., Yang, R., & Murr, L. E. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.010 · Cited by 360
Fatigue behavior of porous biomaterials manufactured using selective laser melting
Amin Yavari, S., Wauthle, R., van der Stok, J., Riemslag, A. C., Janssen, M., Mulier, M., Kruth, J. P., Schrooten, J., Weinans, H., & Zadpoor, A. A. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2013.08.006 · Cited by 357
Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg
Liu, Y., Liu, Z., Jiang, Y., Wang, G. W., Yang, Y., & Zhang, L. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2017.11.020 · Cited by 352
Self-citationAntibacterial Surface Treatment for Orthopaedic Implants
Gallo, J., Holinka, M., & Moucha, C. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms150813849 · Cited by 344
Cheng, X. Y., Li, S. J., Murr, L. E., Zhang, Z. B., Hao, Y. L., Yang, R., Medina, F., & Wicker, R. B. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.10.005 · Cited by 329
Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting
Li, S. J., Murr, L. E., Cheng, X., Zhang, Z., Hao, Y., Yang, R., Medina, F. R., & Wicker, R. B. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.10.051 · Cited by 305
Yu, Y., Jin, G., Xue, Y., Wang, D., Liu, X., & Sun, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.11.067 · Cited by 301
Facchini, L., Magalini, E., Robotti, P., & Molinari, A. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910960262 · Cited by 290
Surface treatments and roughness properties of Ti-based biomaterials
Bagno, A., & Di Bello, C. (2004) · Journal of Materials Science: Materials in Medicine · doi:10.1023/b:jmsm.0000042679.28493.7f · Cited by 282
Porous Titanium Implants: A Review
Pałka, K., & Pokrowiecki, R. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700648 · Cited by 279
Surface nano-functionalization of biomaterials
Liu, X., Chu, P. K., & Ding, C. (2010) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2010.06.013 · Cited by 276
Properties of Ti–6Al–4V non-stochastic lattice structures fabricated via electron beam melting
Cansizoglu, O., Harrysson, O. L. A., Cormier, D., West, H., & Mahale, T. (2008) · Materials Science and Engineering A · doi:10.1016/j.msea.2008.04.002 · Cited by 267
Anisotropy of Young's modulus of bone
Katz, J. L. (1980) · Nature · doi:10.1038/283106a0 · Cited by 264
Zhao, S., Li, S. J., Hou, W. T., Hao, Y. L., Yang, R., & Misra, R. D. K. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.01.034 · Cited by 262
Murr, L. E., Gaytan, S. M., Medina, F., Martinez, E., Martinez, J. L., Hernandez, D. H., Machado, B. I., Ramirez, D. A., & Wicker, R. B. (2010) · Materials Science and Engineering: A · doi:10.1016/j.msea.2009.11.015 · Cited by 258
Corrosion fatigue of biomedical metallic alloys: Mechanisms and mitigation
Antunes, R. A., & de Oliveira, M. C. L. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.09.012 · Cited by 250
Cytokine-mediated regulation of CXCR4 expression in human neutrophils
Nagase, H., Miyamasu, M., Yamaguchi, M., Imanishi, M., Tsuno, N. H., Matsushima, K., Yamamoto, K., Morita, Y., & Hirai, K. (2002) · Journal of Leukocyte Biology · doi:10.1189/jlb.71.4.711 · Cited by 240
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Self-citationAdvanced metal powder based manufacturing of complex components by electron beam melting
Gaytan, S. M., Murr, L. E., Medina, F. R., Martinez, E., Lopez, M. I., & Wicker, R. B. (2009) · Materials Technology · doi:10.1179/106678509x12475882446133 · Cited by 235
Kirmanidou, Y., Sidira, M., Drosou, M.-E., Bennani, V., Bakopoulou, A., Tsouknidas, A., Michailidis, N., & Michalakis, K. (2016) · BioMed Research International · doi:10.1155/2016/2908570 · Cited by 231
Liu, X., Ding, C., & Wang, Z. (2001) · Biomaterials · doi:10.1016/s0142-9612(00)00386-0 · Cited by 226
Besse, M., Castany, P., & Gloriant, T. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.006 · Cited by 223
Immune Response to Synthetic Materials: Sensitization of Patients Receiving Orthopaedic Implants
Merritt, K., & Rodrigo, J. J. (1996) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199605000-00009 · Cited by 222
Yuan, J., Cui, L., Zhang, W. J., Liu, W., & Cao, Y. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.10.015 · Cited by 218
Gollwitzer, H. (2003) · Journal of Antimicrobial Chemotherapy · doi:10.1093/jac/dkg105 · Cited by 216
McGregor, D. B., Baan, R. A., Partensky, C., Rice, J. M., & Wilbourn, J. D. (2000) · European Journal of Cancer · doi:10.1016/s0959-8049(99)00312-3 · Cited by 215
Zhang, F., Zhang, Z., Zhu, X., Kang, E.-T., & Neoh, K.-G. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.08.043 · Cited by 212
Li, Y., Yang, W., Li, X., Zhang, X., Wang, C., Meng, X., Pei, Y., Fan, X., Lan, P., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00331 · Cited by 210
Corrosion Behaviour of Selective Laser Melted Ti-TiB Biocomposite in Simulated Body Fluid
Chen, Y., Zhang, J., Dai, N., Qin, P., Attar, H., & Zhang, L.-C. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.02.112 · Cited by 207
Self-citationVahabzadeh, S., Roy, M., Bandyopadhyay, A., & Bose, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.022 · Cited by 198
Zheng, Y. F., Zhang, B. B., Wang, B. L., Wang, Y. B., Li, L., Yang, Q. B., & Cui, L. S. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.02.010 · Cited by 197
Bordji, K., Jouzeau, J. Y., Mainard, D., Payan, E., Netter, P., Rie, K. T., Stucky, T., & Hage-Ali, M. (1996) · Biomaterials · doi:10.1016/0142-9612(96)83289-3 · Cited by 195
Review of wear mechanisms in hip implants: Paper I – General
Buford, A., & Goswami, T. (2004) · Materials & Design · doi:10.1016/j.matdes.2003.11.010 · Cited by 195
Mechanical Properties of Dried Defatted Spongy Bone
Lindahl, O. (1976) · Acta Orthopaedica Scandinavica · doi:10.3109/17453677608998966 · Cited by 194
A literature review of Ti-6Al-4V linear friction welding
McAndrew, A. R., Colegrove, P. A., Bühr, C., Flipo, B. C. D., & Vairis, A. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.003 · Cited by 190
Mechanical properties and histology of cortical bone from younger and older men
Evans, F. G. (1976) · The Anatomical Record · doi:10.1002/ar.1091850102 · Cited by 188
Evaluation of titanium alloy fabricated using electron beam melting system for dental applications
Koike, M., Martinez, K., Guo, L., Chahine, G., Kovacevic, R., & Okabe, T. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2011.03.013 · Cited by 182
Age variations in the properties of human tibial travecular bone
Ding, M. L., Dalstra, M., Danielsen, C. C., Kabel, J., Hvid, I., & Linde, F. (1997) · Journal of Bone and Joint Surgery - British Volume · doi:10.1302/0301-620x.79b6.7538 · Cited by 181
Development and mechanical characterization of porous titanium bone substitutes
Barbas, A., Bonnet, A.-S., Lipinski, P., Pesci, R., & Dubois, G. (2012) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.01.008 · Cited by 180
Shi, Z., Neoh, K. G., Kang, E. T., Poh, C. K., & Wang, W. (2009) · Biomacromolecules · doi:10.1021/bm900203w · Cited by 167
Ramarolahy, A., Castany, P., Prima, F., Laheurte, P., Péron, I., & Gloriant, T. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.01.017 · Cited by 165
Li, G., Cao, H., Zhang, W., Ding, X., Yang, G., Qiao, Y., Liu, X., & Jiang, X. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10633 · Cited by 162
Shi, Z., Neoh, K. G., Kang, E. T., Poh, C., & Wang, W. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31648 · Cited by 156
Gallardo-Moreno, A. M., Pacha‐Olivenza, M. A., Saldaña, L., Pérez-Giraldo, C., Bruque, J. M., Vilaboa, N. E., & González-Martín, M. L. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.07.028 · Cited by 148
Attar, H., Bönisch, M., Calin, M., Zhang, L., Zhuravleva, K., Funk, A., Scudino, S., Yang, C. Q., & Eckert, J. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.122 · Cited by 139
Self-citationFukuda, A., Takemoto, M., Saito, T., Fujibayashi, S., Neo, M., Yamaguchi, S., Kizuki, T., Matsushita, T., Niinomi, M., Kokubo, T., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.026 · Cited by 134
Carbon plasma immersion ion implantation of nickel–titanium shape memory alloys
Poon, R. W. Y., Yeung, K., Liu, X. Y., et al. (2004) · Biomaterials · doi:10.1016/j.biomaterials.2004.07.056 · Cited by 134
Thomsen, P., Malmström, J., Emanuelsson, L., René, M., & Snis, A. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31250 · Cited by 131
Piattelli, M., Scarano, A., Paolantonio, M., Iezzi, G., Petrone, G., & Piattelli, A. (2002) · Journal of Oral Implantology · Cited by 130
Yu, B., Qi, F., Chen, Y., Wang, X., Zheng, B., Zhang, W., Li, Y., & Zhang, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09108 · Cited by 128
Self-citationImproved Corrosion Resistance on Selective Laser Melting Produced Ti-5Cu Alloy after Heat Treatment
Qin, P., Liu, Y., Sercombe, T. B., Li, Y., Zhang, C., Cao, C., Sun, H., & Zhang, L. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00319 · Cited by 128
Self-citationOrdikhani, F., Tamjid, E., & Simchi, A. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.04.036 · Cited by 111
Fabrication of novel TiZr alloy foams for biomedical applications
Wen, C., Yamada, Y., & Hodgson, P. D. (2005) · Materials Science and Engineering C · doi:10.1016/j.msec.2005.08.006 · Cited by 110
Martin, J. Y., Dean, D. D., Cochran, D. L., Simpson, J., Boyan, B. D., & Schwartz, Z. (1996) · Clinical Oral Implants Research · doi:10.1034/j.1600-0501.1996.070104.x · Cited by 102
Khan, W., KAPOOR, M., & Kumar, N. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.01.006 · Cited by 101
Printing of Titanium implant prototype
Wiria, F. E., Shyan, J. Y. M., Lim, P. N., Wen, F. G. C., Yeo, J. F., & Cao, T. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2009.12.050 · Cited by 99
Liu, L. H., Yang, C. Q., Wang, F., Qu, S., Li, X., Zhang, W., Li, Y., & Zhang, L. (2015) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2015.04.032 · Cited by 99
Self-citationMontanaro, L., Arciola, C. R., Campoccia, D., & Cervellati, M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00098-4 · Cited by 98
Yamada, M., Shiota, M., Yamashita, Y., et al. (2006) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.30715 · Cited by 88
Investigations into Ti–(Nb,Ta)–Fe alloys for biomedical applications
Biesiekierski, A., Lin, J., Li, Y., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.010 · Cited by 83
Seol, Y., Park, Y., Lee, S., Kim, K.-H., Lee, J., Kim, T., Lee, Y., Ku, Y., Rhyu, I., Han, S., et al. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30639 · Cited by 82
A semi-empirical approach to the prediction of deformation behaviors of β-Ti alloys
Wang, C., Russell, A. M., & Cao, G. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.08.035 · Cited by 79
Zhang, L., Xu, J. Z., & Eckert, J. (2006) · Journal of Applied Physics · doi:10.1063/1.2234535 · Cited by 78
Self-citationZhang, C., Ding, Z., Xie, L., Zhang, L., Wu, L., Fu, Y., Wang, L., & Lü, W. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.06.141 · Cited by 77
Self-citationScharowsky, T., Juechter, V., Singer, R. F., & Körner, C. (2015) · Advanced Engineering Materials · doi:10.1002/adem.201400542 · Cited by 76
In vitro simulation of biocompatibility of Ti‐Al‐V
Bruneel, N., & Helsen, J. A. (1988) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820220305 · Cited by 67
An in vitro evaluation of novel NHA/zircon plasma coating on 316L stainless steel dental implant
Karamian, E., Motamedi, M. R. K., Khandan, A., Soltani, P., & Maghsoudi, S. (2014) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2014.04.001 · Cited by 62
Improved hMSC functions on titanium coatings by type I collagen immobilization
Ao, H., Xie, Y., Tan, H., Wu, X., Liu, G., Qin, A., Zheng, X., & Tang, T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34682 · Cited by 61
Characteristics and growth kinetics of plasma paste borided Cp–Ti and Ti6Al4V alloy
Ataibis, V., & Taktak, Ş. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.08.023 · Cited by 59
Dettin, M., Bagno, A., Gambaretto, R., Iucci, G., Conconi, M. T., Tuccitto, N., Menti, A. M., Grandi, C., Bello, C. D., Licciardello, A., et al. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32064 · Cited by 59
Long term tissue response to titanium coated with diamond like carbon
Mohanty, M., Anilkumar, T. V., Mohanan, P. V., Muraleedharan, C. V., Bhuvaneshwar, G. S., Derangère, F., Sampeur, Y., & Suryanarayanan, R. (2002) · Biomolecular Engineering · doi:10.1016/s1389-0344(02)00026-6 · Cited by 57
Wang, L., Qu, J., Chen, L., Meng, Q., Zhang, L., Qin, J., Zhang, D., & Lü, W. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-3089-8 · Cited by 56
Self-citationDing, Z., Zhang, C., Xie, L., Zhang, L., Wang, L., & Lü, W. (2016) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3809-8 · Cited by 54
Self-citationBronk, J., Russell, B. H., Rivera, J. J., Pasqualini, R., Arap, W., Höök, M., & Barbu, E. M. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.04.005 · Cited by 51
Yang, C. Q., Mo, D., Lu, H. Z., Li, X., Zhang, W. W., Fu, Z., Zhang, L., & Lavernia, E. J. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.03.005 · Cited by 51
Self-citationEnhancement of BMP-2 Induced Bone Regeneration by SDF-1α Mediated Stem Cell Recruitment
Zwingenberger, S., Yao, Z., Jacobi, A., Vater, C., Valladares, R. D., Li, C., Nich, C., Rao, A. J., Christman, J. E., Antonios, J. K., et al. (2013) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0222 · Cited by 49
Nie, F. L., Zheng, Y., Wei, S., Wang, D. S., Yu, Z., Salimgareeva, G., Polyakov, A. V., & Valiev, R. Z. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34472 · Cited by 48
Yuan, W., Hou, W., Li, S., Hao, Y., Yang, R., Zhang, L., & Zhu, Y. (2017) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2017.12.003 · Cited by 46
Self-citationXie, L., Wang, L., Wang, K., Yin, G., Fu, Y., Zhang, D., Lü, W., Hua, L., & Zhang, L. (2018) · Materialia · doi:10.1016/j.mtla.2018.08.007 · Cited by 38
Self-citationMorra, M., Cassinelli, C., Cascardo, G., Bollati, D., & y Baena, R. R. (2010) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.32702 · Cited by 33
Ceramic modifications of porous titanium: Effects on macrophage activation
Scislowska-Czarnecka, A., Menaszek, E., Szaraniec, B., & Kołaczkowska, E. (2012) · Tissue and Cell · doi:10.1016/j.tice.2012.08.002 · Cited by 30
Cytocompatibility of titanium metal injection molding with various anodic oxidation post-treatments
Demangel, C., Auzene, D., Vayssade, M., Duval, J.-L., Vigneron, P., Nagel, M. D., & Puippe, J. C. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.05.037 · Cited by 22
Ran, R., Liu, Y., Wang, L., Lu, E., Xie, L., Lü, W., Wang, K., & Zhang, L. (2018) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-018-4577-4 · Cited by 16
Self-citationLiu, L. H., Yang, C. Q., Liu, Z., et al. (2017) · Materials Characterization · doi:10.1016/j.matchar.2017.01.009 · Cited by 4
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationProgress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Biomedical Applications of Titanium Alloys: A Comprehensive Review
Marin, E., & Lanzutti, A. (2023) · Materials · doi:10.3390/ma17010114 · Cited by 489
Wang, J., Zhu, R., Liu, Y., & Zhang, L. (2023) · Advanced Powder Materials · doi:10.1016/j.apmate.2023.100137 · Cited by 484
Self-citationImproving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Metadata
- Authors
- Zhang, L., & Chen, L.
- Venue
- Advanced Engineering Materials
- Publisher
- Wiley
- Published
- 2019-03-20
- Volume
- 21
- Issue
- 4
- ISSN
- 1438-1656 (ISSN-L)
- 1527-2648
- OpenAlex
- W2922549505
- Cited by
- 1,100
- References
- 160
- FWCI
- 43.85
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.