The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion Batteries
Abstract
Recently, lithium‐ion batteries have been attracting more interest for use in automotive applications. Lithium resources are confirmed to be unevenly distributed in South America, and the cost of the lithium raw materials has roughly doubled from the first practical application in 1991 to the present and is increasing due to global demand for lithium‐ion accumulators. Since the electrochemical equivalent and standard potential of sodium are the most advantageous after lithium, sodium based energy storage is of great interest to realize lithium‐free high energy and high voltage batteries. However, to the best of our knowledge, there have been no successful reports on electrochemical sodium insertion materials for battery applications; the major challenge is the negative electrode and its passivation. In this study, we achieve high capacity and excellent reversibility sodium‐insertion performance of hard‐carbon and layered NaNi 0.5 Mn 0.5 O 2 electrodes in propylene carbonate electrolyte solutions. The structural change and passivation for hard‐carbon are investigated to study the reversible sodium insertion. The 3‐volt secondary Na‐ion battery possessing environmental and cost friendliness, Na+‐shuttlecock hard‐carbon/NaNi 0.5 Mn 0.5 O 2 cell, demonstrates steady cycling performance as next generation secondary batteries and an alternative to Li‐ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Peled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
Advanced Model for Solid Electrolyte Interphase Electrodes in Liquid and Polymer Electrolytes
Peled, E., Golodnitsky, D., & Ardel, G. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837858 · Cited by 1,205
Ohzuku, T., Iwakoshi, Y., & Sawai, K. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2220849 · Cited by 1,089
Aurbach, D., Markovsky, B., Weissman, I., Levi, E., & Ein-Eli, Y. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00194-2 · Cited by 969
Electrochemical intercalation of sodium in NaxCoO2 bronzes
DELMAS, C., BRACONNIER, J., FOUASSIER, C., & HAGENMULLER, P. (1981) · Solid State Ionics · doi:10.1016/0167-2738(81)90076-x · Cited by 903
Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO2
Komaba, S., Takei, C., Nakayama, T., Ogata, A., & Yabuuchi, N. (2010) · Electrochemistry Communications · doi:10.1016/j.elecom.2009.12.033 · Cited by 579
Self-citationElectrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201691g · Cited by 405
Self-citationA Sodium-Ion Cell Based on the Fluorophosphate Compound NaVPO[sub 4]F
Barker, J., Saidi, M. Y., & Swoyer, J. L. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1523691 · Cited by 370
Cited by
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Self-citationElectrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Sodium-ion batteries: present and future
Hwang, J.-Y., Myung, S.-T., & Sun, Y.-K. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00776g · Cited by 5,305
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
From Lithium‐Ion to Sodium‐Ion Batteries: Advantages, Challenges, and Surprises
Nayak, P. K., Yang, L., Brehm, W., & Adelhelm, P. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703772 · Cited by 2,674
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Self-citationReview—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
Sodium Ion Insertion in Hollow Carbon Nanowires for Battery Applications
Cao, Y., Xiao, L., Sushko, M. L., Wang, W., Schwenzer, B., Xiao, J., Nie, Z., Saraf, L. V., Yang, Z., & Liu, J. (2012) · Nano Letters · doi:10.1021/nl3016957 · Cited by 1,929
Advances and issues in developing salt-concentrated battery electrolytes
Yamada, Y., Wang, J., Ko, S., Watanabe, E., & Yamada, A. (2019) · Nature Energy · doi:10.1038/s41560-019-0336-z · Cited by 1,788
A phosphorene–graphene hybrid material as a high-capacity anode for sodium-ion batteries
Sun, J., Lee, H.-W., Pasta, M., Yuan, H., Zheng, G., Sun, Y., Li, Y., & Cui, Y. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.194 · Cited by 1,480
A comprehensive review of sodium layered oxides: powerful cathodes for Na-ion batteries
Han, M. H., Gonzalo, E., Singh, G., & Rojo, T. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03192j · Cited by 1,380
Hou, H., Banks, C. E., Jing, M., Zhang, Y., & Ji, X. (2015) · Advanced Materials · doi:10.1002/adma.201503816 · Cited by 1,214
MoS2/Graphene Composite Paper for Sodium-Ion Battery Electrodes
David, L., Bhandavat, R., & Singh, G. (2014) · ACS Nano · doi:10.1021/nn406156b · Cited by 1,212
Komaba, S., Hasegawa, T., Dahbi, M., & Kubota, K. (2015) · Electrochemistry Communications · doi:10.1016/j.elecom.2015.09.002 · Cited by 1,104
Self-citationHollow Carbon Nanospheres with Superior Rate Capability for Sodium‐Based Batteries
Tang, K., Fu, L., White, R. J., Yu, L., Titirici, M., Antonietti, M., & Maier, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100691 · Cited by 1,104
Na-Ion Battery Anodes: Materials and Electrochemistry
Luo, W., Shen, F., Bommier, C., Zhu, H., Ji, X., & Hu, L. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00482 · Cited by 1,081
Hard carbons for sodium-ion batteries: Structure, analysis, sustainability, and electrochemistry
Dou, X., Hasa, I., Saurel, D., Vaalma, C., Wu, L., Buchholz, D., Bresser, D., Komaba, S., & Passerini, S. (2019) · Materials Today · doi:10.1016/j.mattod.2018.12.040 · Cited by 1,062
Self-citationAn Initial Review of the Status of Electrode Materials for Potassium‐Ion Batteries
Pramudita, J. C., Sehrawat, D., Goonetilleke, D., & Sharma, N. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602911 · Cited by 1,045
Towards K‐Ion and Na‐Ion Batteries as “Beyond Li‐Ion”
Kubota, K., Dahbi, M., Hosaka, T., Kumakura, S., & Komaba, S. (2018) · The Chemical Record · doi:10.1002/tcr.201700057 · Cited by 1,015
Self-citationUpdate on Na-based battery materials. A growing research path
Palomares, V., Casas-Cabanas, M., Castillo-Martínez, E., Han, M. H., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41031e · Cited by 992
Carbon Nanosheet Frameworks Derived from Peat Moss as High Performance Sodium Ion Battery Anodes
Ding, J., Wang, H., Li, Z., Kohandehghan, A., Cui, K., Xu, Z., Zahiri, B., Tan, X., Lotfabad, E. M., Olsen, B. C., et al. (2013) · ACS Nano · doi:10.1021/nn404640c · Cited by 979
Jian, Z., Han, W., Lu, X., Yang, H., Hu, Y., Zhou, J., Zhou, Z., Li, J., Chen, W., Chen, D., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200558 · Cited by 970
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
In search of an optimized electrolyte for Na-ion batteries
Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M., & Palacín, M. R. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22258b · Cited by 968
High-Density Sodium and Lithium Ion Battery Anodes from Banana Peels
Lotfabad, E. M., Ding, J., Cui, K., Kohandehghan, A., Kalisvaart, W. P., Hazelton, M., & Mitlin, D. (2014) · ACS Nano · doi:10.1021/nn502045y · Cited by 907
Fire-extinguishing organic electrolytes for safe batteries
Wang, J., Yamada, Y., Sodeyama, K., Watanabe, E., Takada, K., Tateyama, Y., & Yamada, A. (2017) · Nature Energy · doi:10.1038/s41560-017-0033-8 · Cited by 907
Intercalation chemistry of graphite: alkali metal ions and beyond
Li, Y., Lu, Y., Adelhelm, P., Titirici, M.-M., & Hu, Y.-S. (2019) · Chemical Society Reviews · doi:10.1039/c9cs00162j · Cited by 903
High‐Performance Sodium Ion Batteries Based on a 3D Anode from Nitrogen‐Doped Graphene Foams
Xu, J., Wang, M., Wickramaratne, N. P., Jaroniec, M., Dou, S., & Dai, L. (2015) · Advanced Materials · doi:10.1002/adma.201405370 · Cited by 901
A 3.8-V earth-abundant sodium battery electrode
Barpanda, P., Oyama, G., Nishimura, S.-I., Chung, S.-C., & Yamada, A. (2014) · Nature Communications · doi:10.1038/ncomms5358 · Cited by 873
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Charge carriers in rechargeable batteries: Na ions vs. Li ions
Hong, S. Y., Kim, Y., Park, Y., Choi, A., Choi, N.-S., & Lee, K. T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40811f · Cited by 830
Komaba, S., Yabuuchi, N., Nakayama, T., Ogata, A., Ishikawa, T., & Nakai, I. (2012) · Inorganic Chemistry · doi:10.1021/ic300357d · Cited by 822
Self-citationSaravanan, K., Mason, C. W., Rudola, A., Wong, K. H., & Balaya, P. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200803 · Cited by 810
Carbon coated Na3V2(PO4)3 as novel electrode material for sodium ion batteries
Jian, Z., Zhao, L., Pan, H., Hu, Y.-S., Li, H., Chen, W., & Chen, L. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.11.009 · Cited by 804
Wei, Q., Xiong, F., Tan, S., Huang, L., Lan, E. H., Dunn, B., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201602300 · Cited by 802
Review—Practical Issues and Future Perspective for Na-Ion Batteries
Kubota, K., & Komaba, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151514jes · Cited by 775
Self-citationSodium‐Ion Batteries: From Academic Research to Practical Commercialization
Deng, J., Luo, W., Chou, S., Liu, H., & Dou, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701428 · Cited by 770
Sodium Storage Behavior in Natural Graphite using Ether‐based Electrolyte Systems
Kim, H., Hong, J., Park, Y., Kim, J., Hwang, I., & Kang, K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402984 · Cited by 767
Xie, X., Ao, Z., Su, D., Zhang, J., & Wang, G. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404078 · Cited by 743
Recent progress on sodium ion batteries: potential high-performance anodes
Li, L., Zheng, Y., Zhang, S., Yang, J., Shao, Z., & Guo, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01023d · Cited by 740
Sodium‐Ion Battery Materials and Electrochemical Properties Reviewed
Chayambuka, K., Mulder, G., Danilov, D. L., & Notten, P. H. L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800079 · Cited by 733
Non-aqueous electrolytes for sodium-ion batteries
Ponrouch, A., Monti, D., Boschin, A., Steen, B., Johansson, P., & Palacín, M. R. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04428b · Cited by 731
Fluorinated Ethylene Carbonate as Electrolyte Additive for Rechargeable Na Batteries
Komaba, S., Ishikawa, T., Yabuuchi, N., Murata, W., Ito, A., & Ohsawa, Y. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200973k · Cited by 713
Self-citationHigh Capacity and Rate Capability of Amorphous Phosphorus for Sodium Ion Batteries
Qian, J., Wu, X., Cao, Y., Ai, X., & Yang, H. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209689 · Cited by 696
Sun, Y., Zhao, L., Pan, H., Lu, X., Gu, L., Hu, Y.-S., Li, H., Armand, M., Ikuhara, Y., Chen, L., et al. (2013) · Nature Communications · doi:10.1038/ncomms2878 · Cited by 683
Electrolyte design strategies and research progress for room-temperature sodium-ion batteries
Che, H., Chen, S., Xie, Y., Wang, H., Amine, K., Liao, X.-Z., & Ma, Z.-F. (2017) · Energy & Environmental Science · doi:10.1039/c7ee00524e · Cited by 676
A review of carbon materials and their composites with alloy metals for sodium ion battery anodes
Balogun, M.-S., Luo, Y., Qiu, W., Liu, P., & Tong, Y. (2016) · Carbon · doi:10.1016/j.carbon.2015.09.091 · Cited by 671
Saurel, D., Orayech, B., Xiao, B., Carriazo, D., Li, X., & Rojo, T. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703268 · Cited by 668
Sodium‐Ion Batteries Paving the Way for Grid Energy Storage
Hirsh, H. S., Li, Y., Tan, D. H. S., Zhang, M., Zhao, E., & Meng, Y. S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001274 · Cited by 668
Porous Carbons: Structure‐Oriented Design and Versatile Applications
Tian, W., Zhang, H., Duan, X., Sun, H., Shao, G., & Wang, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909265 · Cited by 657
Biomass-derived porous carbon materials with sulfur and nitrogen dual-doping for energy storage
Xu, G., Han, J., Ding, B., Nie, P., Pan, J., Dou, H., Li, H., & Zhang, X. (2015) · Green Chemistry · doi:10.1039/c4gc02185a · Cited by 649
Electrochemical Intercalation of Potassium into Graphite
Zhao, J., Zou, X., Zhu, Y., Xu, Y., & Wang, C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602248 · Cited by 647
Li, Y., Lu, Y., Zhao, C., Hu, Y.-S., Titirici, M.-M., Li, H., Huang, X., & Chen, L. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2017.01.002 · Cited by 642
Wang, H., Wu, Z., Meng, F., Ma, D., Huang, X., Wang, L., & Zhang, X. (2013) · ChemSusChem · doi:10.1002/cssc.201200680 · Cited by 639
Review—Hard Carbon Negative Electrode Materials for Sodium-Ion Batteries
Irisarri, E., Ponrouch, A., & Palacin, M. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0091514jes · Cited by 629
Negative electrodes for Na-ion batteries
Dahbi, M., Yabuuchi, N., Kubota, K., Tokiwa, K., & Komaba, S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00826j · Cited by 623
Self-citationHeteroatom Doping: An Effective Way to Boost Sodium Ion Storage
Li, Y., Chen, M., Liu, B., Zhang, Y., Liang, X., & Xia, X. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000927 · Cited by 621
A zero-strain layered metal oxide as the negative electrode for long-life sodium-ion batteries
Wang, Y., Yu, X., Xu, S., Bai, J., Xiao, R., Hu, Y.-S., Li, H., Yang, X.-Q., Chen, L., & Huang, X. (2013) · Nature Communications · doi:10.1038/ncomms3365 · Cited by 616
Zhu, H., Jia, Z., Chen, Y., Weadock, N., Wan, J., Vaaland, O., Han, X., Li, T., & Hu, L. (2013) · Nano Letters · doi:10.1021/nl400998t · Cited by 612
Sodium-Ion Intercalation Mechanism in MXene Nanosheets
Kajiyama, S., Szabova, L., Sodeyama, K., Iinuma, H., Morita, R., Gotoh, K., Tateyama, Y., Okubo, M., & Yamada, A. (2016) · ACS Nano · doi:10.1021/acsnano.5b06958 · Cited by 602
Self-citationPolyanion‐Type Electrode Materials for Sodium‐Ion Batteries
Ni, Q., Bai, Y., Wu, F., & Wu, C. (2017) · Advanced Science · doi:10.1002/advs.201600275 · Cited by 586
MgO‐Template Synthesis of Extremely High Capacity Hard Carbon for Na‐Ion Battery
Kamiyama, A., Kubota, K., Igarashi, D., Youn, Y., Tateyama, Y., Ando, H., Gotoh, K., & Komaba, S. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202013951 · Cited by 586
Self-citationUltrasmall Sn Nanoparticles Embedded in Carbon as High‐Performance Anode for Sodium‐Ion Batteries
Liu, Y., Zhang, N., Jiao, L., Tao, Z., & Chen, J. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402943 · Cited by 581
Progress in electrolytes for rechargeable Li-based batteries and beyond
Li, Q., Chen, J., Fan, L., Kong, X., & Lu, Y. (2016) · Green Energy & Environment · doi:10.1016/j.gee.2016.04.006 · Cited by 569
Zhao, L., Zhao, J., Hu, Y., Li, H., Zhou, Z., Armand, M., & Chen, L. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200166 · Cited by 568
Hou, H., Shao, L., Zhang, Y., Zou, G., Chen, J., & Ji, X. (2017) · Advanced Science · doi:10.1002/advs.201600243 · Cited by 566
Li, Y., Xu, S., Wu, X., Yu, J., Wang, Y., Hu, Y.-S., Li, H., Chen, L., & Huang, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05451b · Cited by 533
Liu, Z., Lu, T., Song, T., Yu, X.-Y., Lou, X. W. (., & Paik, U. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01100h · Cited by 532
Understanding of the sodium storage mechanism in hard carbon anodes
Chen, X., Liu, C., Fang, Y., Ai, X., Zhong, F., Yang, H., & Cao, Y. (2022) · Carbon Energy · doi:10.1002/cey2.196 · Cited by 527
Li, S., Dong, Y., Xu, L., Xu, X., He, L., & Mai, L. (2014) · Advanced Materials · doi:10.1002/adma.201305522 · Cited by 526
Towards high energy density sodium ion batteries through electrolyte optimization
Ponrouch, A., Dedryvère, R., Monti, D., Demet, A. E., Ateba Mba, J. M., Croguennec, L., Masquelier, C., Johansson, P., & Palacín, M. R. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41379a · Cited by 520
Pan, H., Lu, X., Yu, X., Hu, Y., Li, H., Yang, X., & Chen, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300139 · Cited by 516
Choi, S. H., Ko, Y. N., Lee, J., & Kang, Y. C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201402428 · Cited by 515
Xie, X., Makaryan, T., Zhao, M., Van Aken, K. L., Gogotsi, Y., & Wang, G. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502161 · Cited by 509
Zhang, J., Wang, D.-W., Lv, W., Zhang, S., Liang, Q., Zheng, D., Kang, F., & Yang, Q.-H. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03367a · Cited by 508
Prussian Blue Analogs for Rechargeable Batteries
Wang, B., Han, Y., Wang, X., Bahlawane, N., Pan, H., Yan, M., & Jiang, Y. (2018) · iScience · doi:10.1016/j.isci.2018.04.008 · Cited by 499
Huang, Y., Zhao, L., Li, L., Xie, M., Wu, F., & Chen, R. (2019) · Advanced Materials · doi:10.1002/adma.201808393 · Cited by 495
Rice husk-derived hard carbons as high-performance anode materials for sodium-ion batteries
Wang, Q., Zhu, X., Liu, Y., Fang, Y., Zhou, X., & Bao, J. (2018) · Carbon · doi:10.1016/j.carbon.2017.11.054 · Cited by 492
Origin of fast charging in hard carbon anodes
Li, Y., Vasileiadis, A., Zhou, Q., Lu, Y., Meng, Q., Li, Y., Ombrini, P., Zhao, J., Chen, Z., Niu, Y., et al. (2024) · Nature Energy · doi:10.1038/s41560-023-01414-5 · Cited by 490
Controlling SEI Formation on SnSb‐Porous Carbon Nanofibers for Improved Na Ion Storage
Ji, L., Gu, M., Shao, Y., Li, X., Engelhard, M. H., Arey, B. W., Wang, W., Nie, Z., Xiao, J., Wang, C., et al. (2014) · Advanced Materials · doi:10.1002/adma.201304962 · Cited by 489
Effective Liquid-Phase Exfoliation and Sodium Ion Battery Application of MoS2 Nanosheets
Bang, G. S., Nam, K. W., Kim, J. Y., Shin, J., Choi, J. W., & Choi, S.-Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am4060222 · Cited by 484
High capacity hard carbon anodes for sodium ion batteries in additive free electrolyte
Ponrouch, A., Goñi, A. R., & Palacín, M. R. (2013) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.10.038 · Cited by 475
Understanding of Sodium Storage Mechanism in Hard Carbons: Ongoing Development under Debate
Sun, N., Qiu, J., & Xu, B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200715 · Cited by 474
Liu, J., Zhang, Y., Zhang, L., Xie, F., Vasileff, A., & Qiao, S. (2019) · Advanced Materials · doi:10.1002/adma.201901261 · Cited by 472
Eshetu, G. G., Elia, G. A., Armand, M., Forsyth, M., Komaba, S., Rojo, T., & Passerini, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000093 · Cited by 470
Self-citationSolubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries
Mogensen, R., Brandell, D., & Younesi, R. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00491 · Cited by 464
Cao, B., Liu, H., Xu, B., Lei, Y., Chen, X., & Song, H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00950f · Cited by 457
Heteroatom-doped carbon-based materials for lithium and sodium ion batteries
Yuan, Y., Chen, Z., Yu, H., Zhang, X., Liu, T., Xia, M., Zheng, R., Shui, M., & Shu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.027 · Cited by 455
Recent advances in titanium-based electrode materials for stationary sodium-ion batteries
Guo, S., Yi, J., Sun, Y., & Zhou, H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01807f · Cited by 453
Revealing the Intercalation Mechanisms of Lithium, Sodium, and Potassium in Hard Carbon
Alvin, S., Cahyadi, H. S., Hwang, J., Chang, W., Kwak, S. K., & Kim, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000283 · Cited by 452
Recent Progress of Layered Transition Metal Oxide Cathodes for Sodium‐Ion Batteries
Liu, Q., Hu, Z., Chen, M., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S. (2019) · Small · doi:10.1002/smll.201805381 · Cited by 447
Yang, T., Qian, T., Wang, M., Shen, X., Xu, N., Sun, Z., & Yan, C. (2016) · Advanced Materials · doi:10.1002/adma.201503221 · Cited by 444
All Organic Sodium‐Ion Batteries with Na4C8H2O6
Wang, S., Wang, L., Zhu, Z., Hu, Z., Zhao, Q., & Chen, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400032 · Cited by 440
Graphene-based materials for electrochemical energy storage devices: Opportunities and challenges
Lv, W., Li, Z., Deng, Y., Yang, Q.-H., & Kang, F. (2016) · Energy Storage Materials · doi:10.1016/j.ensm.2015.10.002 · Cited by 433
Hard Carbon as Sodium‐Ion Battery Anodes: Progress and Challenges
Xiao, B., Rojo, T., & Li, X. (2019) · ChemSusChem · doi:10.1002/cssc.201801879 · Cited by 432
Yabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301453 · Cited by 432
Self-citation
Metadata
- Authors
- Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K.
- Venue
- Advanced Functional Materials
- Publisher
- Wiley
- Published
- 2011-08-11
- Volume
- 21
- Issue
- 20
- Pages
- 3859-3867
- ISSN
- 1616-301X (ISSN-L)
- 1616-3028
- OpenAlex
- W1996597102
- Cited by
- 2,116
- References
- 19
- FWCI
- 58.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.