2D Transition‐Metal‐Dichalcogenide‐Nanosheet‐Based Composites for Photocatalytic and Electrocatalytic Hydrogen Evolution Reactions
The DOI matches its Crossref record; 187 of the 190 references it cites were found in a registry or an index; 19 of the 161 sources its claims cite were checked for support.
Abstract
Hydrogen (H2) is one of the most important clean and renewable energy sources for future energy sustainability. Nowadays, photocatalytic and electrocatalytic hydrogen evolution reactions (HERs) from water splitting are considered as two of the most efficient methods to convert sustainable energy to the clean energy carrier, H2. Catalysts based on transition metal dichalcogenides (TMDs) are recognized as greatly promising substitutes for noble‐metal‐based catalysts for HER. The photocatalytic and electrocatalytic activities of TMD nanosheets for the HER can be further improved after hybridization with many kinds of nanomaterials, such as metals, oxides, sulfides, and carbon materials, through different methods including the in situ reduction method, the hot‐injection method, the heating‐up method, the hydro(solvo)thermal method, chemical vapor deposition (CVD), and thermal annealing. Here, recent progress in photocatalytic and electrocatalytic HERs using 2D TMD‐based composites as catalysts is discussed.
Overview
CoChat Summary
TL;DR
This review summarizes recent progress in 2D transition-metal-dichalcogenide (TMD)-based composites for photocatalytic and electrocatalytic hydrogen evolution reactions (HERs), focusing on synthesis methods, composite architectures, and performance. It argues that TMD nanosheets hybridized with metals, oxides, sulfides, and carbon materials can improve HER activity and may offer low-cost alternatives to noble-metal catalysts.
Key findings
- TMD-based composites can enhance photocatalytic HER by improving charge separation and providing active edge sites; for example, CdS activity (150 µmol g⁻¹ h⁻¹) increased up to 28 times with 1 wt% WS₂ (4200 µmol h⁻¹ g⁻¹) and 36 times with 0.2 wt% MoS₂ (ca. 5400 µmol h⁻¹ g⁻¹).
- Optimized MoS₂/CdS photocatalysts reached 13,150 µmol h⁻¹ g⁻¹ versus 850 µmol h⁻¹ g⁻¹ for pure CdS, while MoS₂-g-C₃N₄ (0.5 wt%) reached 230.1 µmol h⁻¹ g⁻¹ versus 20.3 µmol h⁻¹ g⁻¹ for unmodified g-C₃N₄.
- In electrocatalytic HER, TMD-metal hybrids such as Pt-MoS₂ showed near-zero overpotential and a Tafel slope of 40 mV per decade, comparable to commercial Pt-C; Pt on TiS₂/TaS₂ showed a Tafel slope of 41 mV per decade.
- TMD-carbon and TMD-metal-oxide composites also improved activity: MoS₂/RGO gave a Tafel slope of 41 mV per decade and overpotential of ca. 100 mV; MoO₃@MoS₂ core-shell nanowires gave overpotential of 150–200 mV and Tafel slope of 50–60 mV per decade.
Methods
- Design: a review/progress report, not a primary experimental study; it synthesizes recent literature on preparation and catalytic HER performance of 2D TMD-based composites.
- Data/sample: cited studies covering TMD composites with semiconductors, metals, carbon materials, and metal oxides, including MoS₂, WS₂, TiS₂, TaS₂, MoSe₂, and WSe₂.
- Main analysis: narrative comparison of synthetic methods (in situ reduction, hot-injection, heating-up, hydro(solvo)thermal, CVD, thermal annealing) and photocatalytic/electrocatalytic HER metrics such as H₂ evolution rates, overpotentials, Tafel slopes, and quantum yields.
Limitations
- The paper states that practical application is limited by aggregation of TMD-based composites under light irradiation, heat, or electrocatalytic testing, which decreases active sites.
- The paper states that the catalysis mechanism of TMD-based composites for HER is not well revealed; most mechanistic work focuses on single-component TMD nanosheets, while composite studies often only report activity effects.
- The paper states that most research has focused on MoS₂ and WS₂, and that other TMDs need further study; it also notes that some preparation methods struggle with precise control of layer number, morphology, or composite formation mechanism.
- Evident from the text: as a review, it reports no new experimental data, and the tabulated performance comparisons come from studies using different light sources, reaction solutions, catalyst loadings, and measurement conditions, which limits direct cross-study comparison.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
14 Valid · 7 Not valid · 69 Not checked · 16 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Recently, our group has demonstrated that a series of noble metal nanocrystals (Au, Ag, Pt, and Pd) could grow on the surface of single-layer MoS 2 nanosheets by using reduction agents (e.g., ascorbic acid) or the photochemical reduction method. [ 56 ]”
What the sources say
- Partly supportedcites [56] matched to “Solution-phase epitaxial growth of noble metal nanostructures on dispersible single-layer molybdenum disulfide nanosheets” (2013) sourceExperimental — accuracy not yet measured
The introduction and the section “Epitaxial growth of Pd, Pt and Ag NSs on MoS₂ nanosheets” report growth of Au, Ag, Pt and Pd nanostructures on single-layer MoS₂. That section lists chemical and photochemical reduction among the methods used, but says Au deposited spontaneously without an added reducing agent; the claim omits this third route. Page numbers are not provided in our copy. (LLM, conf=0.88)
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“graphene (G), a single-layer of graphite, is considered to be an excellent supporting matrix for semiconductor nanoparticles, because of its superior electron mobility (ca. 4000 cm 2 V -1 s -1 ) and high specifi c surface area (ca. 2600 m 2 g -1 ). [ 116-121 ]”
What the sources say
- Not checked — no full text of the sourcecites [116] matched to “Graphene-based composite materials” (2006) source
- Not checked — no full text of the sourcecites [117] matched to “Anchoring Semiconductor and Metal Nanoparticles on a Two-Dimensional Catalyst Mat. Storing and Shuttling Electrons with Reduced Graphene Oxide” (2010) source
- Not checked — no full text of the sourcecites [118] matched to “Graphene-based semiconductor photocatalysts” (2012) source
- Partly supportedcites [119] matched to “Synthesis and applications of graphene-based noble metal nanostructures” (2013) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) says that inorganic nanostructures have been prepared on graphene oxide or reduced graphene oxide sheets. The Applications section attributes improved performance of graphene-supported noble metal catalysts to graphene’s large surface area and high conductivity. Our copy does not give the claimed mobility or surface-area values, or specifically establish the claim for semiconductor nanoparticles. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [120] matched to “Graphene and Graphene‐Based Materials for Energy Storage Applications” (2014) source
- Not checked — no full text of the sourcecites [121] matched to “Graphene-based materials: Fabrication and application for adsorption in analytical chemistry” (2014) source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“CVD is an ideal method to prepare high-quality, few-defect MoS 2 nanosheets with controllable layer numbers on different substrates. [ 77-80 ]”
What the sources say
- Not checked — no full text of the sourcecites [77] matched to “Recent advances in controlled synthesis of two-dimensional transition metal dichalcogenides via vapour deposition techniques” (2015) source
- Supportedcites [78] matched to “Layer-Dependent Electrocatalysis of MoS2 for Hydrogen Evolution” (2014) source
The passage labeled Abstract (p. 2) describes CVD-grown MoS₂ films on glassy carbon with precursor-controlled layer numbers, high crystalline quality, and similar films previously grown on sapphire. Another passage labeled Abstract (p. 2) reports no substantial voids, steps, or edges. These findings support the citing sentence’s characterization of CVD as a method for making high-quality, few-defect films on different substrates. (LLM, conf=0.88)
- Partly supportedcites [79] matched to “Controlled Scalable Synthesis of Uniform, High-Quality Monolayer and Few-layer MoS2 Films” (2013) sourceExperimental — accuracy not yet measured
The Abstract and Results (pages unavailable) report a self-limiting CVD approach that grows high-quality monolayer and few-layer MoS2 films on silicon oxide, sapphire, and graphite with precisely controlled layer numbers. The Results describe good crystalline quality, but do not establish that the films have few defects; the paper demonstrates this particular CVD approach rather than CVD methods generally. (LLM, conf=0.84)
- Partly supportedcites [80] matched to “Synthesis of Large‐Area MoS2 Atomic Layers with Chemical Vapor Deposition” (2012) sourceExperimental — accuracy not yet measured
The conclusion (p. 3) reports CVD-grown monolayer, bilayer and few-layer MoS₂ on SiO₂/Si, notes growth on sapphire, and describes the monolayer as highly crystalline. But observing different layer thicknesses does not establish control over layer number; the paper also does not establish that the sheets have few defects. (LLM, conf=0.86)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Carbon materials, such as porous carbon, [ 158-161 ] carbon nanofi bers, [ 162 ] carbon nanotubes [ 163-167 ] and graphene, [ 42,43,168-175 ] have shown great potential applications as electrocatalyst supports owing to their high conductivity and stability.”
What the sources say
- Not checked — no full text of the sourcecites [158] matched to “Synthesis of MoS2-carbon composites with different morphologies and their application in hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [159] matched to “Ultrathin MoS2 nanosheets growing within an in-situ-formed template as efficient electrocatalysts for hydrogen evolution” (2015) source
- Partly supportedcites [160] matched to “Nanocomposite of MoS2 on ordered mesoporous carbon nanospheres: A highly active catalyst for electrochemical hydrogen evolution” (2012) sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) calls carbon materials good catalyst supports, and Section 3.2 describes the mesoporous carbon nanospheres as highly conductive. Section 3.2 reports stability for the MoS₂/carbon composite electrode, not for carbon supports themselves; the claim that carbon materials are suitable because of their stability is therefore not established by this paper. (LLM, conf=0.83)
- Not checked — no full text of the sourcecites [161] matched to “A high-porosity carbon molybdenum sulphide composite with enhanced electrochemical hydrogen evolution and stability” (2013) source
- Not checked — no full text of the sourcecites [162] matched to “S-rich single-layered MoS 2 nanoplates embedded in N-doped carbon nanofibers: efficient co-electrocatalysts for the hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [163] matched to “Highly active and stable hydrogen evolution electrocatalysts based on molybdenum compounds on carbon nanotube−graphene hybrid support” (2014) source
- Partly supportedcites [164] matched to “Facile Synthesis of MoS 2 @CNT as an Effective Catalyst for Hydrogen Production in Microbial Electrolysis Cells” (2014) sourceExperimental — accuracy not yet measured
The paper describes highly conductive carbon nanotubes as a support for a MoS₂ electrocatalyst and links increased CNT content to improved hydrogen-evolution activity (opening summary; Heyrovsky reaction section, page unavailable). It does not establish stability as a reason for using CNTs; its conclusion says catalyst durability remains to be investigated. This citation supports the nanotube and conductivity portion of the citing sentence, but not its stability rationale. (LLM, conf=0.87)
- Not checked — no full text of the sourcecites [165] matched to “Facile synthesis of low crystalline MoS2 nanosheet-coated CNTs for enhanced hydrogen evolution reaction” (2013) source
- Not checked — no full text of the sourcecites [166] matched to “Molybdenum sulfide/N-doped CNT forest hybrid catalysts for high-performance hydrogen evolution reaction” (2014) source
- Not checked — no full text of the sourcecites [167] matched to “Easy incorporation of single-walled carbon nanotubes into two-dimensional MoS2 for high-performance hydrogen evolution” (2014) source
plainstates an association- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
Every source the paper cites for this claim was checked and supports it.
In the paper
“each layer of graphene can absorb ca. 2.3% of incident light. [ 123 ]”
What the sources say
- Supportedcites [123] matched to “Fine Structure Constant Defines Visual Transparency of Graphene” (2008) source
The Optical measurements section (p. 2) reports that each additional graphene layer adds approximately 2.3% to white-light opacity. The Absorption of light by 2D Dirac fermions section (p. 4) explains that graphene reflects very little light, so its opacity is dominated by absorption. (LLM, conf=0.94)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
41 more claims
Create a free account to see all 106 claims and every source verdict.
- It may state two separate claims as one. 43
- Probably not a substantial claim. 18
- The quote only partly states this claim. 1
Citations
Cites
Electrochemical Photolysis of Water at a Semiconductor Electrode
FUJISHIMA, A., & HONDA, K. (1972) · Nature · doi:10.1038/238037a0 · Cited by 34,169
Atomically Thin MoS 2 : A New Direct-Gap Semiconductor
Mak, K. F., Lee, C., Hone, J., Shan, J., & Heinz, T. F. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.136805 · Cited by 15,586
Graphene-based composite materials
Stankovich, S., Dikin, D. A., Dommett, G. H. B., Kohlhaas, K. M., Zimney, E. J., Stach, E. A., Piner, R. D., Nguyen, S. T., & Ruoff, R. S. (2006) · Nature · doi:10.1038/nature04969 · Cited by 12,922
Grätzel, M. (2001) · Nature · doi:10.1038/35104607 · Cited by 12,687
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Self-citationWalter, M. G., Warren, E. L., McKone, J. R., Boettcher, S. W., Mi, Q., Santori, E. A., & Lewis, N. S. (2010) · Chemical Reviews · doi:10.1021/cr1002326 · Cited by 9,388
Fine Structure Constant Defines Visual Transparency of Graphene
Nair, R. R., Blake, P., Grigorenko, A. N., Novoselov, K. S., Booth, T. J., Stauber, T., Peres, N. M. R., & Geim, A. K. (2008) · Science · doi:10.1126/science.1156965 · Cited by 9,084
Hydrogen-storage materials for mobile applications
Schlapbach, L., & Züttel, A. (2001) · Nature · doi:10.1038/35104634 · Cited by 8,865
Semiconductor-based Photocatalytic Hydrogen Generation
Chen, X., Shen, S., Guo, L., & Mao, S. S. (2010) · Chemical Reviews · doi:10.1021/cr1001645 · Cited by 7,876
Research works printed but not linked: 5
- Liu Y., 2013, Int. J. Photoenergy, 2013, 247516
- Min S., 2012, J. Phys. Chem. B, 116, 25415
- Troostwijk A. P. v., 1789, Obs. Phys., 35, 369
- 10.1021/ja404523s · DOI · Paper page
- 10.1039/C3TA13584E · DOI · Paper page
Cited by
Items 401–500 of 1,459
Bahadur, A., Hussain, W., Iqbal, S., Ullah, F., Shoaib, M., Liu, G., & Feng, K. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09430g · Cited by 76
Ai, Z., Zhang, K., Shi, D., Chang, B., Shao, Y., Zhang, L., Wu, Y., & Hao, X. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104408 · Cited by 78
Cai, Z., Wu, A., Yan, H., Xiao, Y., Chen, C., Tian, C., Wang, L., Wang, R., & Fu, H. (2018) · Nanoscale · doi:10.1039/c8nr01057a · Cited by 77
Excited State Energy Transfer in Metal‐Organic Frameworks
Wang, Z., & Wang, C. (2021) · Advanced Materials · doi:10.1002/adma.202005819 · Cited by 76
Rich surface hydroxyl design for nanostructured TiO2 and its hole-trapping effect
Xiao, S., Wu, S., Dong, Y., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125909 · Cited by 76
Yamaguchi, Y., Aono, R., Hayashi, E., Kamata, K., & Hara, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c08043 · Cited by 77
ZnO nanosheets with atomically thin ZnS overlayers for photocatalytic water splitting
Zhang, X., Zhou, Y., Wu, D., Liu, X., Zhang, R., Liu, H., Dong, C., Yang, J. L., Kulinich, S. A., & Du, X. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01846d · Cited by 74
Energy-efficient transistors: suppressing the subthreshold swing below the physical limit
Zhai, Y., Feng, Z., Zhou, Y., & Han, S. (2021) · Materials Horizons · doi:10.1039/d0mh02029j · Cited by 79
Hu, J., Chen, D., Mo, Z., Li, N., Xu, Q., Li, H., He, J., Xu, H. F., & Lu, J. (2019) · Angewandte Chemie · doi:10.1002/ange.201813417 · Cited by 76
Xu, J., Li, D., Chen, Y., Tan, L., Kou, B., Wan, F., Jiang, W., & Li, F. (2017) · Nanomaterials · doi:10.3390/nano7120450 · Cited by 78
“Recently, two-dimensional (2D) nanosheets have drawn increasing attention due to their special optical and electronic properties, as 2D nanosheets often show outstanding performance in catalysis [1], sensing [2], nanoelectronic devices [3] and so on.”
BackgroundHuang, L., Han, B., Huang, X., Liang, S., Deng, Z., Chen, W., Peng, M., & Deng, H. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.05.162 · Cited by 74
Wang, X., Wang, X., Yang, H., Meng, A., Li, Z., Yang, L., Wang, L., Li, S., Li, G., & Huang, J. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.134000 · Cited by 70
Park, H., Zhang, Y., Lee, E., Shankhari, P., & Fokwa, B. P. T. (2019) · ChemSusChem · doi:10.1002/cssc.201901301 · Cited by 75
Li, J., Xia, Z., Zhou, X., Qin, Y., Ma, Y., & Qu, Y. (2017) · Nano Research · doi:10.1007/s12274-016-1335-z · Cited by 74
Yang, Z., Chen, H., Wu, F., Hou, Y., Qiao, J., Ma, X., Bai, H., Ma, B., & Li, J. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.07.048 · Cited by 81
Li, Y., Zhu, S., Xu, Y., Ge, R., Qu, J., Zhu, M., Liu, Y., Cairney, J. M., Zheng, R., Li, S., et al. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127804 · Cited by 72
An overview of co‐catalysts on metal oxides for photocatalytic water splitting
Rosman, N. N., Yunus, R. M., Shah, N. R. A. M., Shah, R. M., Arifin, K. B., Minggu, L. J., & Ludin, N. A. (2022) · International Journal of Energy Research · doi:10.1002/er.8001 · Cited by 77
Gao, F., Lei, R., Huang, X., et al. (2021) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2021.120187 · Cited by 74
Qian, X., Ding, J., Zhang, J., Zhang, Y., Wang, Y., Kan, E., Wang, X., & Zhu, J. (2018) · Nanoscale · doi:10.1039/c7nr07213a · Cited by 74
Recent Advances in WS2 and Its Based Heterostructures for Water-Splitting Applications
Thiehmed, Z., Shakoor, A., & Altahtamouni, T. (2021) · Catalysts · doi:10.3390/catal11111283 · Cited by 79
Research progress and prospects in antifouling performance of photocatalytic sterilization: A review
Zhang, X., Zhang, S., Mathivanan, K., Zhang, R., Zhang, J., Jiang, Q., Sand, W., Duan, J., & Hou, B. (2024) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2024.04.052 · Cited by 78
Metal Chalcogenides on Silicon Photocathodes for Efficient Water Splitting: A Mini Overview
Joe, J., Yang, H., Bae, C., & Shin, H. (2019) · Catalysts · doi:10.3390/catal9020149 · Cited by 80
Vikraman, D., Hussain, S., Akbar, K., Karuppasamy, K., Chun, S., Jung, J., & Kim, H. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03921 · Cited by 75
Yu, J., Seo, S., Luo, Y., Sun, Y. L., Oh, S., Nguyen, C. T. K., Seo, C., Kim, J., Kim, J., & Lee, H. (2020) · ACS Nano · doi:10.1021/acsnano.9b07366 · Cited by 73
Water-Soluble Defect-Rich MoS2 Ultrathin Nanosheets for Enhanced Hydrogen Evolution
Zhang, J., Wang, Y., Cui, J., Wu, J., Li, Y., Zhu, T., Kang, H., Yang, J., Sun, J., Qin, Y., et al. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b01121 · Cited by 73
Li, T., Jin, H., Liang, Z., Huang, L., Lu, Y., Yu, H., Hu, Z., Wu, J., Xia, B. Y., Feng, G., et al. (2018) · Nanoscale · doi:10.1039/c8nr01556b · Cited by 72
Ma, Z., Meng, H., Wang, M., Tang, B., Li, J., & Wang, X. (2018) · ChemElectroChem · doi:10.1002/celc.201700965 · Cited by 72
Kwon, I. S., Kwak, I. H., Abbas, H. G., Jung, G., Lee, Y., Park, J., Yoo, S. J., Kim, J.-G., & Kang, H. S. (2018) · Nanoscale · doi:10.1039/c8nr02365d · Cited by 77
Ye, C., Wang, M. Q., Chen, G., Deng, Y. H., Li, L. J., Luo, H. Q., & Li, N. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00592j · Cited by 72
Enhanced oxygen evolution reaction of metallic nickel phosphide nanosheets by surface modification
Li, Z., Dou, X., Zhao, Y., & Wu, C. (2016) · Inorganic Chemistry Frontiers · doi:10.1039/c6qi00078a · Cited by 72
Guo, C., Zhang, Y., Zhang, Y., et al. (2018) · CrystEngComm · doi:10.1039/c8ce00954f · Cited by 72
Improving alkaline hydrogen evolution reaction kinetics on molybdenum carbide: Introducing Ru dopant
Chen, J., Chen, C., Chen, Y., Wang, H., Mao, S., & Wang, Y. (2020) · Journal of Catalysis · doi:10.1016/j.jcat.2020.10.020 · Cited by 68
Liu, Y., Shi, Y., Yin, H., & Yang, C. (2020) · Applied Physics Letters · doi:10.1063/5.0014867 · Cited by 70
Nguyen, V.-T., Le, P., Hsu, Y.-C., & Wei, K. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20902 · Cited by 71
Advances in MoS2-based nanomaterials for supercapacitors, batteries and photovoltaics applications
Bello, I. T., Tsotetsi, D., Shaku, B., Adedokun, O., Chen, D., & Dhlamini, M. S. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.114355 · Cited by 77
Pan, U. N., Singh, T. I., Paudel, D. R., Gudal, C. C., Kim, N. H., & Lee, J. H. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05865c · Cited by 71
Zhou, Y., Luo, M., Zhang, W., Zhang, Z., Meng, X., Shen, X., Liu, H., Zhou, M., & Zeng, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03686 · Cited by 70
Chen, J., Ma, Q., Wu, X., Li, L., Liu, J., & Zhang, H. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0317-6 · Cited by 75
Self-citationSolar-driven tandem photoredox nickel-catalysed cross-coupling using modified carbon nitride
Qin, Y., Martindale, B., Sun, R., Rieth, A. J., & Nocera, D. G. (2020) · Chemical Science · doi:10.1039/d0sc02131h · Cited by 74
Catalysis for solar-driven chemistry: The role of electrocatalysis
Perathoner, S., & Centi, G. (2018) · Catalysis Today · doi:10.1016/j.cattod.2018.03.005 · Cited by 75
Colloidal Single‐Layer Photocatalysts for Methanol‐Storable Solar H2 Fuel
Pang, Y., Uddin, M. N., Chen, W., Javaid, S., Barker, E., Li, Y., Suvorova, A. A., Saunders, M., Yin, Z., & Jia, G. (2019) · Advanced Materials · doi:10.1002/adma.201905540 · Cited by 70
Patra, B. K., Khilari, S., Pradhan, D., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01357 · Cited by 70
Karuppasamy, K., Jothi, V. R., Vikraman, D., Prasanna, K., Maiyalagan, T., Sang, B., Yi, S., & Kim, H. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.02.042 · Cited by 70
Huang, J., Fang, G., Liu, K., Zhou, J., Tang, X., Cai, K., & Liang, S. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.136 · Cited by 68
Wang, M.-Q., Tang, C., Ye, C., Duan, J., Li, C., Chen, Y., Bao, S.-J., & Xu, M. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta04684k · Cited by 69
Zhang, S., Zhang, B., Jiang, Y., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148618 · Cited by 70
A review of graphene-based 3D van der Waals hybrids and their energy applications
Wang, H., Tang, C., & Zhang, Q. (2019) · Nano Today · doi:10.1016/j.nantod.2019.02.006 · Cited by 70
Yang, J., Zhang, C., Niu, Y., Huang, J., Qian, X., & Wong, K. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.128293 · Cited by 70
Ranjith, R., Karmegam, N., Alsawalha, M., Hu, X., & Jothimani, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2022.117132 · Cited by 71
Bimetallic MnCo selenide yolk shell structures for efficient overall water splitting
Mei, G., Liang, H., Wei, B., Shi, H., Ming, F., Xu, X., & Wang, Z. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.09.062 · Cited by 68
Two-Dimensional Nanomaterials for Photoinduced Antibacterial Applications
Zhao, J., Huang, S., Ravisankar, P., & Zhu, H. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00950 · Cited by 75
Sukanya, R., Alves, D. C. D. S., & Breslin, C. B. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac7172 · Cited by 71
Chen, L. X., Chen, Z., Jiang, M. Z., Lu, Z., Gao, C., Cai, G., & Singh, C. V. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta08649e · Cited by 65
Selenium‐Enriched Nickel Selenide Nanosheets as a Robust Electrocatalyst for Hydrogen Generation
Wang, F., Li, Y., Shifa, T. A., Liu, K., Wang, F., Wang, Z., Xu, P., Wang, Q., & He, J. (2016) · Angewandte Chemie · doi:10.1002/ange.201602802 · Cited by 68
Feng, W., Liu, C., Zhang, G., Yang, H. Y., Su, Y., Sun, Y., & Pang, H. (2024) · EnergyChem · doi:10.1016/j.enchem.2024.100119 · Cited by 69
Ning, L., Jiang, T., Shao, Z., Ding, K., Zhang, X., & Jie, J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02139b · Cited by 65
Lee, E., Park, H., Joo, H., & Fokwa, B. P. T. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202000154 · Cited by 67
Layered Noble Metal Dichalcogenides: Tailoring Electrochemical and Catalytic Properties
Chia, X., Sofer, Z., Luxa, J., & Pumera, M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05083 · Cited by 70
Zhao, F., Li, J., Chen, Y., Zhang, M., & Zhang, H. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148741 · Cited by 64
Self-citationSun, K., Liu, Y., Pan, Y., Zhu, H., Zhao, J., Zeng, L., Liu, Z., & Liu, C. (2018) · Nano Research · doi:10.1007/s12274-018-2026-8 · Cited by 68
“The latter has emerged as a promising clean technology to produce hydrogen, as an alternative energy source to fossil fuels [2, 3].”
BackgroundVattikuti, S. V. P., Shim, J., & Byon, C. (2017) · Journal of Solid State Chemistry · doi:10.1016/j.jssc.2017.11.017 · Cited by 66
Solar‐Driven Biomass Reforming for Hydrogen Generation: Principles, Advances, and Challenges
Pan, H., Li, J., Wang, Y., Xia, Q., Qiu, L., & Zhou, B. (2024) · Advanced Science · doi:10.1002/advs.202402651 · Cited by 67
Photocatalytic reduction of CO 2 by halide perovskites: recent advances and future perspectives
Raza, M. A., Li, F., Que, M., Zhu, L., & Chen, X. (2021) · Materials Advances · doi:10.1039/d1ma00703c · Cited by 67
Lu, Y., Ma, B., Yang, Y., Huang, E., Ge, Z., Zhang, T., Zhang, S., Li, L., Guan, N., Ma, Y., et al. (2017) · Nano Research · doi:10.1007/s12274-016-1390-5 · Cited by 67
“Over the past 40 years, many metal-based semiconductor photocatalysts [8, 9], including metal oxides [10, 11], metal sulfides [12] or selenides [13], metal oxynitrides [14], and perovskite oxide [15], have been investigated for photocatalytic water splitting processes.”
BackgroundZhai, L., Gebre, S. T., Chen, B., Xu, D., Chen, J., Li, Z., Liu, Y., Yang, H., Ling, C., Ge, Y., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-38237-7 · Cited by 67
“The precise control over their nanoscale structures is essential to understand the structure-property correlation and enhance their performance invarious applications, such aselectronics 9,10 , catalysis 11,12 , solar energy conversion 13,14 , etc.”
Self-citationHuang, H., Fan, X., Singh, D. J., & Zheng, W. (2018) · ACS Omega · doi:10.1021/acsomega.8b01414 · Cited by 62
Tungsten disulfide: synthesis and applications in electrochemical energy storage and conversion
Lei, W., Xiao, J., Liu, H.-P., Jia, Q., & Zhang, H. (2020) · Tungsten · doi:10.1007/s42864-020-00054-6 · Cited by 71
Self-citationLiu, Z., Tee, S. Y., Guan, G., & Han, M. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01315-y · Cited by 79
“Alternatively, nanostructured hybridization is realized via surface adsorption of 2D nanomaterials or covalent linkage with other nanostructures to form hetero-junction for more or better functionalities [19, 26, 27].”
BackgroundJabar, B., Li, F., Zheng, Z., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-27564-2 · Cited by 64
Chemical Stability and Transformation of Molybdenum Disulfide Nanosheets in Environmental Media
Lee, T.-W., Chen, C.-C., & Chen, C. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.9b00318 · Cited by 64
Tunable Pt–MoSx Hybrid Catalysts for Hydrogen Evolution
Chia, X., Sutrisnoh, N. A. A., & Pumera, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19346 · Cited by 64
Hassan, M. A., Kim, M., Johar, M. A., Waseem, A., Kwon, M., & Ryu, S. (2019) · Scientific Reports · doi:10.1038/s41598-019-56807-y · Cited by 66
Schwarzer Phosphor neu entdeckt: vom Volumenmaterial zu Monoschichten
Gusmão, R., Sofer, Z., & Pumera, M. (2017) · Angewandte Chemie · doi:10.1002/ange.201610512 · Cited by 64
High-entropy phosphate/C hybrid nanosheets for efficient acidic hydrogen evolution reaction
Wang, Z., Zhang, X., Wu, X., Pan, Y., Li, H., Han, Y., Xu, G., Chi, J., Lai, J., & Wang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.135375 · Cited by 67
Recent developments of electrospun nanofibers for electrochemical energy storage and conversion
Zhu, J., Yan, C., Li, G., Cheng, H., Ya, L., Liu, T., Mao, Q. J., Cho, H., Gao, Q., Gao, C., et al. (2023) · Energy storage materials · doi:10.1016/j.ensm.2023.103111 · Cited by 94
Wang, X., Li, Q., Zhou, C., Cao, Z., & Zhang, R. (2019) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2019.07.014 · Cited by 65
Dou, Y., Zhang, L., Xu, J., He, C., Xu, X., Sun, Z., Liao, T., Nagy, B., Liu, P., & Dou, S. X. (2018) · ACS Nano · doi:10.1021/acsnano.7b08691 · Cited by 65
Template‐Assisted Synthesis of Metallic 1T′‐Sn0.3W0.7S2 Nanosheets for Hydrogen Evolution Reaction
Shao, G., Xue, X., Wu, B., Lin, Y., Ouzounian, M., Hu, T. S., Xu, Y., Liu, X., Li, S., Suenaga, K., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906069 · Cited by 63
Sumesh, C. K. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.10.235 · Cited by 63
Kim, T. I., Kim, J., Park, I.-J., Cho, K.-O., & Choi, S. (2019) · 2D Materials · doi:10.1088/2053-1583/ab070e · Cited by 63
Zhao, P., Wang, L., Wu, Y., Yang, T., Ding, Y., Yang, H. G., & Hu, A. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00551 · Cited by 61
Yu, Z., Deng, Z., Li, Y., & Wang, X. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403435 · Cited by 86
Rahmanian, E., Malekfar, R., & Pumera, M. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201703434 · Cited by 63
Huu, H., Le, Q. V., Tekalgne, M. A., Tran, V. A., Lee, T. H., Hong, S. H., Han, S.-M., Ahn, . H., Kim, Y. J., Jang, H. W., et al. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.156952 · Cited by 60
Gan, X., & Lei, D. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2022.214665 · Cited by 67
Karmakar, S., Ghosh, S., & Kumbhakar, P. (2020) · Journal of Nanoparticle Research · doi:10.1007/s11051-019-4710-3 · Cited by 63
“…(Sethia and Sakthive 2017; Xing et al. 2018), to introduce the visible light response, a p-type lower bandgap semiconductor of ZnO and a narrow bandgap (~ 1.30 eV) semiconductor of transition metal dichalcogenides (TMDCs) are required for efficient coupling (Lu et al. 2016; Tan and Zhang 2015).”
BackgroundInfluentialWang, J., Sun, H., Liu, H., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02111 · Cited by 62
2D material based heterostructures for solar light driven photocatalytic H 2 production
Wang, Y., Ding, Z., Arif, N., Jiang, W., & Zeng, Y. J. (2022) · Materials Advances · doi:10.1039/d2ma00191h · Cited by 70
Hu, M., Chen, H., Liu, B., Xu, X., Cao, B., Jing, P., Zhang, J., Gao, R., & Zhang, J. (2022) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2022.121774 · Cited by 62
Semiconductors as Effective Electrodes for Dye Sensitized Solar Cell Applications
Moharam, M. M., Shazly, A. N. E., Anand, K. V., et al. (2021) · Topics in Current Chemistry · doi:10.1007/s41061-021-00334-w · Cited by 62
Chen, Z., Wu, H., Li, J., Wang, Y., Guo, W., Cao, C., & Chen, Z. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.118576 · Cited by 62
Tong, X., Qi, Y., Chen, J., Wang, N., & Xu, Q. J. (2017) · ChemNanoMat · doi:10.1002/cnma.201700011 · Cited by 64
Gu, Q., Jia, Q., Long, J., et al. (2018) · ChemCatChem · doi:10.1002/cctc.201801616 · Cited by 61
Tan, M., Yu, C., Luan, Q., et al. (2022) · Journal of Materials Chemistry A · doi:10.1039/d2ta05932k · Cited by 61
Self-citationDegradation behaviors and mechanisms of MoS2 crystals relevant to bioabsorbable electronics
Chen, X., Shinde, S. M., Dhakal, K. P., Lee, S. W., Kim, H., Lee, Z., & Ahn, J. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0078-6 · Cited by 63
Zeng, P. F., Ji, X., Su, Z., et al. (2018) · RSC Advances · doi:10.1039/c8ra02807a · Cited by 61
Huy, V. P. H., Ahn, Y., & Hur, J. (2021) · Nanomaterials · doi:10.3390/nano11061517 · Cited by 66
Lv, W., Wang, H., Jia, L., Tang, X., Lin, C. W., Yuwen, L., Wang, L., Huang, W., & Chen, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16878 · Cited by 62
Zhang, T., Meng, F., Gao, M., Ong, W. L., Haw, K., Ding, T., Ho, G. W., & Kawi, S. (2021) · EcoMat · doi:10.1002/eom2.12152 · Cited by 59
Askari, M. B., Banizi, Z. T., Soltani, S., & Seifi, M. (2017) · Optik · doi:10.1016/j.ijleo.2017.11.080 · Cited by 62
Metadata
- Authors
- Lu, Q., Yu, Y., Ma, Q., Chen, B., & Zhang, H.
- Affiliations
- Nanyang Technological University (SG)
- Corresponding author
- Zhang, Hua
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2015-12-16
- Volume
- 28
- Issue
- 10
- Pages
- 1917-1933
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2214476518
- Semantic Scholar
- ddba352ca303d4f19381c3bacbb320e50b21f891
- Cited by
- 1,447
- References
- 190
- Citations by year
- 2026: 46 · 2025: 85 · 2024: 105 · 2023: 113 · 2022: 150 · 2021: 161 · 2020: 195 · 2019: 181 · 2018: 186 · 2017: 157 · 2016: 67
- FWCI
- 40.42
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Advanced Materials (publishedVersion)
- PubMed (publishedVersion)
- DR-NTU (Nanyang Technological University) (submittedVersion)
- Funders
- NTU (M4081296.070.500000)
- iFood Research (M4081458.070.500000)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Advanced Photocatalysis Techniques
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Keywords
- hydrogen evolution reaction, transition metal dichalcogenides, photocatalytic hydrogen evolution, electrocatalytic hydrogen evolution, water splitting, noble metal-free catalysts, hybrid nanostructures, synthesis methods
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-11, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-11 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.