The DOI matches its Crossref record; 187 of the 187 references it cites were found in a registry or an index.
Multifunctional Micro/Nanoscale Fibers Based on Microfluidic Spinning Technology
Abstract
Superfine multifunctional micro/nanoscale fibrous materials with high surface area and ordered structure have attracted intensive attention for widespread applications in recent years. Microfluidic spinning technology (MST) has emerged as a powerful and versatile platform because of its various advantages such as high surface‐area‐to‐volume ratio, effective heat transfer, and enhanced reaction rate. The resultant well‐defined micro/nanoscale fibers exhibit controllable compositions, advanced structures, and new physical/chemical properties. The latest developments and achievements in microfluidic spun fiber materials are summarized in terms of the underlying preparation principles, geometric configurations, and functionalization. Variously architected structures and shapes by MST, including cylindrical, grooved, flat, anisotropic, hollow, core–shell, Janus, heterogeneous, helical, and knotted fibers, are emphasized. In particular, fiber‐spinning chemistry in MST for achieving functionalization of fiber materials by in situ chemical reactions inside fibers is introduced. Additionally, the applications of the fabricated functional fibers are highlighted in sensors, microactuators, photoelectric devices, flexible electronics, tissue engineering, drug delivery, and water collection. Finally, recent progress, challenges, and future perspectives are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
Emerging applications of stimuli-responsive polymer materials
Stuart, M. A. C., Huck, W. T. S., Genzer, J., Müller, M., Ober, C., Stamm, M., Sukhorukov, G. B., Szleifer, I., Tsukruk, V. V., Urban, M., et al. (2010) · Nature Materials · doi:10.1038/nmat2614 · Cited by 5,707
Tissue Engineering--Current Challenges and Expanding Opportunities
Griffith, L. G., & Naughton, G. (2002) · Science · doi:10.1126/science.1069210 · Cited by 2,343
Directional water collection on wetted spider silk
Zheng, Y., Bai, H., Huang, Z., Tian, X., Nie, F.-Q., Zhao, Y., Zhai, J., & Jiang, L. (2010) · Nature · doi:10.1038/nature08729 · Cited by 2,197
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
The enteric nervous system and neurogastroenterology
Furness, J. B. (2012) · Nature Reviews Gastroenterology & Hepatology · doi:10.1038/nrgastro.2012.32 · Cited by 1,619
Yu, D., Goh, K., Wang, H., Wei, L., Jiang, W., Zhang, Q., Dai, L., & Chen, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.93 · Cited by 1,436
Continuous directional water transport on the peristome surface of Nepenthes alata
Chen, H., Zhang, P., Zhang, L., Liu, H., Jiang, Y., Zhang, D., Han, Z., & Jiang, L. (2016) · Nature · doi:10.1038/nature17189 · Cited by 1,261
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Metre-long cell-laden microfibres exhibit tissue morphologies and functions
Onoe, H., Okitsu, T., Itou, A., Kato-Negishi, M., Gojo, R., Kiriya, D., Sato, K., Miura, S., Iwanaga, S., Kuribayashi-Shigetomi, K., et al. (2013) · Nature Materials · doi:10.1038/nmat3606 · Cited by 860
Pu, X., Li, L., Liu, M., Jiang, C., Du, C., Zhao, Z., Hu, W., & Wang, Z. L. (2016) · Advanced Materials · doi:10.1002/adma.201504403 · Cited by 820
Cheng, Y., Wang, R., Sun, J., & Gao, L. (2015) · Advanced Materials · doi:10.1002/adma.201503558 · Cited by 796
Wang, J., Wang, C., & Chen, S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204381 · Cited by 751
Self-citationFabrication of Micro/Nanoscale Motors
Wang, H., & Pumera, M. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00047 · Cited by 738
Liu, L., Yu, Y., Yan, C., Li, K., & Zheng, Z. (2015) · Nature Communications · doi:10.1038/ncomms8260 · Cited by 671
In situ Polymerization Approach to Graphene-Reinforced Nylon-6 Composites
Xu, Z., & Gao, C. (2010) · Macromolecules · doi:10.1021/ma1009337 · Cited by 667
Soft micromachines with programmable motility and morphology
Huang, H.-W., Sakar, M. S., Petruska, A. J., Pané, S., & Nelson, B. J. (2016) · Nature Communications · doi:10.1038/ncomms12263 · Cited by 649
Micromotor-enabled active drug delivery for in vivo treatment of stomach infection
de Ávila, B. E.-F., Angsantikul, P., Li, J., Angel Lopez-Ramirez, M., Ramírez-Herrera, D. E., Thamphiwatana, S., Chen, C., Delezuk, J., Samakapiruk, R., Ramez, V., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00309-w · Cited by 638
Weng, W., Chen, P., He, S., Sun, X., & Peng, H. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201507333 · Cited by 577
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Ultrafast charge and discharge biscrolled yarn supercapacitors for textiles and microdevices
Lee, J. A., Shin, M. K., Kim, S. H., Cho, H. U., Spinks, G. M., Wallace, G. G., Lima, M. D., Lepró, X., Kozlov, M. E., Baughman, R. H., et al. (2013) · Nature Communications · doi:10.1038/ncomms2970 · Cited by 535
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Progress in the Field of Electrospinning for Tissue Engineering Applications
Agarwal, S., Wendorff, J. H., & Greiner, A. (2009) · Advanced Materials · doi:10.1002/adma.200803092 · Cited by 523
Sridhar, R., Lakshminarayanan, R., Madhaiyan, K., Amutha Barathi, V., Lim, K. H. C., & Ramakrishna, S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00226a · Cited by 519
Carbonized Cotton Fabric for High‐Performance Wearable Strain Sensors
Zhang, M., Wang, C., Wang, H., Jian, M., Hao, X., & Zhang, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604795 · Cited by 515
Facile access to versatile fluorescent carbon dots toward light-emitting diodes
Guo, X., Wang, C.-F., Yu, Z.-Y., Chen, L., & Chen, S. (2012) · Chemical Communications · doi:10.1039/c2cc17769b · Cited by 504
Self-citationKang, E., Jeong, G. S., Choi, Y. Y., Lee, K. H., Khademhosseini, A., & Lee, S.-H. (2011) · Nature Materials · doi:10.1038/nmat3108 · Cited by 465
Koo, W.-T., Choi, S.-J., Kim, S.-J., Jang, J.-S., Tuller, H. L., & Kim, I.-D. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09167 · Cited by 424
Reconstructing web evolution and spider diversification in the molecular era
Blackledge, T. A., Scharff, N., Coddington, J. A., Szüts, T., Wenzel, J. W., Hayashi, C. Y., & Agnarsson, I. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0901377106 · Cited by 386
Optical fibre nanowires and microwires: a review
Brambilla, G. (2010) · Journal of Optics · doi:10.1088/2040-8978/12/4/043001 · Cited by 370
Electrospinning versus microfluidic spinning of functional fibers for biomedical applications
Cheng, J., Jun, Y., Qin, J., & Lee, S.-H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2016.10.040 · Cited by 370
A Highly Stretchable Fiber‐Based Triboelectric Nanogenerator for Self‐Powered Wearable Electronics
He, X., Zi, Y., Guo, H., Zheng, H., Xi, Y., Wu, C., Wang, J., Zhang, W., Lu, C., & Wang, Z. L. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201604378 · Cited by 357
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Costantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
Direction Controlled Driving of Tiny Water Drops on Bioinspired Artificial Spider Silks
Bai, H., Tian, X., Zheng, Y., Ju, J., Zhao, Y., & Jiang, L. (2010) · Advanced Materials · doi:10.1002/adma.201003169 · Cited by 322
Zhou, J., Xu, X., Xin, Y., & Lubineau, G. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705591 · Cited by 301
Bioinspired One-Dimensional Materials for Directional Liquid Transport
Ju, J., Zheng, Y., & Jiang, L. (2014) · Accounts of Chemical Research · doi:10.1021/ar5000693 · Cited by 294
Bioinspired Helical Microfibers from Microfluidics
Yu, Y., Fu, F., Shang, L., Cheng, Y., Gu, Z., & Zhao, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605765 · Cited by 291
Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications
Ghosh, S., Parker, S. T., Wang, X., Kaplan, D. L., & Lewis, J. A. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200800040 · Cited by 287
Liu, W., Zhong, Z., Hu, N., Zhou, Y., Maggio, L., Miri, A. K., Fragasso, A., Jin, X., Khademhosseini, A., & Zhang, Y. S. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9d44 · Cited by 280
Kim, J., Yoon, J., & Hayward, R. C. (2010) · Nature Materials · doi:10.1038/nmat2606 · Cited by 277
3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels
Gao, Q., Liu, Z., Lin, Z., Qiu, J., Liu, Y., Liu, A., Wang, Y., Xiang, M., Chen, B., Fu, J., et al. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00643 · Cited by 267
Flexible pH‐Sensing Hydrogel Fibers for Epidermal Applications
Tamayol, A., Akbari, M., Zilberman, Y., Comotto, M., Lesha, E., Serex, L., Bagherifard, S., Chen, Y., Fu, G., Ameri, S. K., et al. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500553 · Cited by 262
Liu, Z., Qi, D., Hu, G., Wang, H., Jiang, Y., Chen, G., Luo, Y., Loh, X. J., Liedberg, B., & Chen, X. (2018) · Advanced Materials · doi:10.1002/adma.201704229 · Cited by 260
Hydrodynamic microfabrication via “on the fly” photopolymerization of microscale fibers and tubes
Jeong, W., Kim, J., Kim, S., Lee, S., Mensing, G. A., & Beebe, D. J. (2004) · Lab on a Chip · doi:10.1039/b411249k · Cited by 256
Bioinspired Multicompartmental Microfibers from Microfluidics
Cheng, Y., Zheng, F., Lu, J., Shang, L., Xie, Z., Zhao, Y., Chen, Y., & Gu, Z. (2014) · Advanced Materials · doi:10.1002/adma.201400798 · Cited by 253
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Yamada, M., Utoh, R., Ohashi, K., Tatsumi, K., Yamato, M., Okano, T., & Seki, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.07.068 · Cited by 247
Microfluidic Spinning of Flat Alginate Fibers with Grooves for Cell‐Aligning Scaffolds
Kang, E., Choi, Y. Y., Chae, S., Moon, J., Chang, J., & Lee, S. (2012) · Advanced Materials · doi:10.1002/adma.201201232 · Cited by 245
“On the Fly” Continuous Generation of Alginate Fibers Using a Microfluidic Device
Shin, S.-J., Park, J.-Y., Lee, J.-Y., Park, H., Park, Y.-D., Lee, K.-B., Whang, C.-M., & Lee, S.-H. (2007) · Langmuir · doi:10.1021/la700818q · Cited by 239
Functionalized polymer nanofibers: a versatile platform for manipulating light at the nanoscale
Wang, P., Wang, Y., & Tong, L. (2013) · Light: Science & Applications · doi:10.1038/lsa.2013.58 · Cited by 237
Microfluidic Chip-Based Fabrication of PLGA Microfiber Scaffolds for Tissue Engineering
Hwang, C. M., Khademhosseini, A., Park, Y., Sun, K., & Lee, S.-H. (2008) · Langmuir · doi:10.1021/la800253b · Cited by 223
Lee, K. H., Shin, S. J., Park, Y., & Lee, S. (2009) · Small · doi:10.1002/smll.200801667 · Cited by 223
Design of capillary microfluidics for spinning cell-laden microfibers
Yu, Y., Shang, L., Guo, J., Wang, J., & Zhao, Y. (2018) · Nature Protocols · doi:10.1038/s41596-018-0051-4 · Cited by 218
Bioinspired nanofibers support chondrogenesis for articular cartilage repair
Coburn, J. M., Gibson, M., Monagle, S., Patterson, Z., & Elisseeff, J. H. (2012) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1121605109 · Cited by 217
Wu, G., Tan, P., Wu, X., Peng, L., Cheng, H., Wang, C., Chen, W., Yu, Z., & Chen, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702493 · Cited by 174
Self-citationYamada, M., Sugaya, S., Naganuma, Y., & Seki, M. (2012) · Soft Matter · doi:10.1039/c2sm07263g · Cited by 173
Flexible Fabrication of Biomimetic Bamboo‐Like Hybrid Microfibers
Yu, Y., Wen, H., Ma, J., Lykkemark, S., Xu, H., & Qin, J. (2014) · Advanced Materials · doi:10.1002/adma.201304974 · Cited by 172
Hair-derived carbon dots toward versatile multidimensional fluorescent materials
Liu, S.-S., Wang, C.-F., Li, C.-X., Wang, J., Mao, L.-H., & Chen, S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00636d · Cited by 164
Self-citationRapid 3D Extrusion of Synthetic Tumor Microenvironments
Grolman, J. M., Zhang, D., Smith, A. M., Moore, J. S., & Kilian, K. A. (2015) · Advanced Materials · doi:10.1002/adma.201501729 · Cited by 162
Microfluidic Spinning of Cell‐Responsive Grooved Microfibers
Shi, X., Ostrovidov, S., Zhao, Y., Liang, X., Kasuya, M., Kurihara, K., Nakajima, K., Bae, H., Wu, H., & Khademhosseini, A. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201404531 · Cited by 162
Tunable Silk: Using Microfluidics to Fabricate Silk Fibers with Controllable Properties
Kinahan, M. E., Filippidi, E., Köster, S., Hu, X., Evans, H. M., Pfohl, T., Kaplan, D. L., & Wong, J. (2011) · Biomacromolecules · doi:10.1021/bm1014624 · Cited by 159
Forterre, Y., & Dumais, J. (2011) · Science · doi:10.1126/science.1210734 · Cited by 159
Yeo, M., Lee, J.-S., Chun, W., & Kim, G. H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
Cheng, Y., Yu, Y., Fu, F., Wang, J., Shang, L., Gu, Z., & Zhao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11445 · Cited by 158
Vitamin metal–organic framework-laden microfibers from microfluidics for wound healing
Yu, Y., Chen, G., Guo, J., Liu, Y., Ren, J., Kong, T., & Zhao, Y. (2018) · Materials Horizons · doi:10.1039/c8mh00647d · Cited by 158
Large‐Scale Fabrication of Bioinspired Fibers for Directional Water Collection
Bai, H., Sun, R., Ju, J., Yao, X., Zheng, Y., & Jiang, L. (2011) · Small · doi:10.1002/smll.201101408 · Cited by 149
Hydrogel Templates for Rapid Manufacturing of Bioactive Fibers and 3D Constructs
Tamayol, A., Najafabadi, A. H., Aliakbarian, B., Arab‐Tehrany, E., Akbari, M., Annabi, N., Juncker, D., & Khademhosseini, A. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500492 · Cited by 147
Luo, Y., Lode, A., & Gelinsky, M. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200303 · Cited by 147
Microfluidic Lithography of Bioinspired Helical Micromotors
Yu, Y., Shang, L., Gao, W. M., Zhao, Z., Wang, H., & Zhao, Y. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705667 · Cited by 146
Microfluidic synthesis of pure chitosan microfibers for bio-artificial liver chip
Lee, K. H., Shin, S. J., Kim, C.-B., Kim, J. K., Cho, Y. W., Chung, B. G., & Lee, S. (2010) · Lab on a Chip · doi:10.1039/b924987g · Cited by 145
Microfluidics-Produced Collagen Fibers Show Extraordinary Mechanical Properties
Haynl, C., Hofmann, E., Pawar, K., Förster, S., & Scheibel, T. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02828 · Cited by 145
Bioinspired Microfibers with Embedded Perfusable Helical Channels
Xu, P., Xie, R., Liu, Y., Luo, G., Ding, M., & Liang, Q. (2017) · Advanced Materials · doi:10.1002/adma.201701664 · Cited by 145
Hydrodynamic spinning of hydrogel fibers
Hu, M., Deng, R., Schumacher, K. M., Kurisawa, M., Ye, H., Purnamawati, K., & Ying, J. Y. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.10.002 · Cited by 143
Bioinspired supramolecular fibers drawn from a multiphase self-assembled hydrogel
Wu, Y., Shah, D. U., Liu, C., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1705380114 · Cited by 142
Sultana, N., & Wang, M. (2012) · Biofabrication · doi:10.1088/1758-5082/4/1/015003 · Cited by 137
Bioinspired Multifunctional Spindle‐Knotted Microfibers from Microfluidics
Shang, L., Fu, F., Cheng, Y., Yu, Y., Wang, J., Gu, Z., & Zhao, Y. (2016) · Small · doi:10.1002/smll.201600286 · Cited by 137
Brougham, C., Levingstone, T. J., Shen, N., Cooney, G. M., Jockenhoevel, S., Flanagan, T. C., & O’Brien, F. J. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700598 · Cited by 135
Ma, K., Du, X., Zhang, Y., & Chen, S. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc02847d · Cited by 135
Self-citationMicrofluidics-generated pancreatic islet microfibers for enhanced immunoprotection
Jun, Y., Kim, M. J., Hwang, Y. H., Jeon, E. A., Kang, A. R., Lee, S., & Lee, D. Y. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.07.079 · Cited by 133
Lee, B. R., Lee, K. H., Kang, E., Kim, D., & Lee, S. (2011) · Biomicrofluidics · doi:10.1063/1.3576903 · Cited by 133
Cell immobilization in gelatin–hydroxyphenylpropionic acid hydrogel fibers
Hu, M., Kurisawa, M., Deng, R., et al. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.03.004 · Cited by 131
Mosaic Hydrogels: One‐Step Formation of Multiscale Soft Materials
Leng, L., McAllister, A., Zhang, B., Radisic, M., & Günther, A. (2012) · Advanced Materials · doi:10.1002/adma.201201442 · Cited by 128
Liu, Y., Zhang, K., Ma, J., & Vancso, G. J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13097 · Cited by 127
Kang, E., Shin, S.-J., Lee, K. H., & Lee, S. (2010) · Lab on a Chip · doi:10.1039/c002695f · Cited by 121
Enriched carbon dots/graphene microfibers towards high-performance micro-supercapacitors
Li, Q. F., Cheng, H., Wu, X., Wang, C., Wu, G., & Chen, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02124d · Cited by 112
Self-citation3D‐Printing of Functionally Graded Porous Materials Using On‐Demand Reconfigurable Microfluidics
Costantini, M., Jaroszewicz, J., Kozoń, Ł., Szlązak, K., Święszkowski, W., Garstecki, P., Stubenrauch, C., Barbetta, A., & Guzowski, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900530 · Cited by 111
Recombinant spider silk from aqueous solutions via a bio-inspired microfluidic chip
Peng, Q., Zhang, Y., Li, L., Shao, H., Qin, K., Hu, X., & Xia, X. (2016) · Scientific Reports · doi:10.1038/srep36473 · Cited by 110
Wu, X., Wu, G., Tan, P., Cheng, H., Hong, R., Wang, F., & Chen, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11135e · Cited by 109
Self-citationSimple Spinning of Heterogeneous Hollow Microfibers on Chip
Yu, Y., Wei, W., Wang, Y., Xu, C., Guo, Y., & Qin, J. (2016) · Advanced Materials · doi:10.1002/adma.201601504 · Cited by 107
Xie, R., Xu, P., Liu, Y., Li, L., Luo, G., Ding, M., & Liang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201705082 · Cited by 106
Chae, S., Kang, E., Khademhosseini, A., & Lee, S. (2013) · Advanced Materials · doi:10.1002/adma.201300837 · Cited by 105
Polymer nanofibre junctions of attolitre volume serve as zeptomole-scale chemical reactors
Anzenbacher, P., & Palacios, M. A. (2009) · Nature Chemistry · doi:10.1038/nchem.125 · Cited by 90
Zhao, X., Yuan, Z., Yildirimer, L., Zhao, J., Lin, Z. Y., Cao, Z. Q., Pan, G., & Cui, W. (2015) · Small · doi:10.1002/smll.201500985 · Cited by 90
Microfluidic-based generation of functional microfibers for biomimetic complex tissue construction
Zuo, Y., He, X., Yang, Y., Wei, D., Sun, J., Zhong, M., Xie, R., Fan, H., & Zhang, X. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.04.036 · Cited by 90
Large-Scale Spinning of Silver Nanofibers as Flexible and Reliable Conductors
Huang, Y., Bai, X., Zhou, M., Liao, S., Yu, Z., Wang, Y., & Wu, H. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b02654 · Cited by 90
Tough silk fibers prepared in air using a biomimetic microfluidic chip
Luo, J., Zhang, L., Peng, Q., Sun, M., Zhang, Y., Shao, H., & Hu, X. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.02.049 · Cited by 88
Lin, Y., Huang, K., Yang, C., Wang, C., Yang, Y., Hsu, H., Liao, Y.-J., & Tsai, C. (2012) · PLoS ONE · doi:10.1371/journal.pone.0033184 · Cited by 87
Polymer–Magnetic Composite Fibers for Remote-Controlled Drug Release
Perera, A. S., Zhang, S., Homer‐Vanniasinkam, S., Coppens, M., & Edirisinghe, M. J. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04774 · Cited by 86
Conductive Polymer Hydrogel Microfibers from Multiflow Microfluidics
Guo, J., Yu, Y., Wang, H., et al. (2019) · Small · doi:10.1002/smll.201805162 · Cited by 85
Controlled polymer synthesis—from biomimicry towards synthetic biology
Pasparakis, G., Krasnogor, N., Cronin, L., Davis, B. G., & Alexander, C. (2009) · Chemical Society Reviews · doi:10.1039/b809333b · Cited by 83
Barnes, G. B., & Woodcock, R. (1958) · American Journal of Physics · doi:10.1119/1.1996110 · Cited by 82
Electrically-responsive core-shell hybrid microfibers for controlled drug release and cell culture
Chen, C., Chen, X., Zhang, H., Zhang, Q., Wang, L., Li, C., Dai, B., Yang, J., Liu, J., & Sun, D. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.04.005 · Cited by 82
Microfluidic synthesis of a cell adhesive Janus polyurethane microfiber
Jung, J.-H., Choi, C., Chung, S. H., Chung, Y., & Lee, C. (2009) · Lab on a Chip · doi:10.1039/b901308c · Cited by 81
Wei, D., Sun, J., Bolderson, J., Zhong, M., Dalby, M. J., Cusack, M., Yin, H., Fan, H., & Zhang, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00078 · Cited by 81
Kobayashi, A., Yamakoshi, K., Yajima, Y., Utoh, R., Yamada, M., & Seki, M. (2013) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2013.05.034 · Cited by 78
Nechyporchuk, O., Håkansson, K. M. O., Gowda.V, K., Lundell, F., Hagström, B., & Köhnke, T. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800557 · Cited by 76
Qin, C.-C., Duan, X.-P., Wang, L., et al. (2015) · Nanoscale · doi:10.1039/c5nr05367f · Cited by 75
Polycaprolactone Microfibrous Scaffolds to Navigate Neural Stem Cells
Sharifi, F. J., Patel, B. B., Dzuilko, A. K., Montazami, R., Sakaguchi, D. S., & Hashemi, N. N. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b01028 · Cited by 75
Ebrahimi, M., Ostrovidov, S., Salehi, S., Kim, S. B., Bae, H., & Khademhosseini, A. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2738 · Cited by 75
Lölsberg, J., Linkhorst, J., Cinar, A., Jans, A., Kuehne, A. J. C., & Wessling, M. (2018) · Lab on a Chip · doi:10.1039/c7lc01366c · Cited by 74
Ghorbanian, S., Qasaimeh, M. A., Akbari, M., Tamayol, A., & Juncker, D. (2014) · Biomedical Microdevices · doi:10.1007/s10544-014-9842-8 · Cited by 73
Flow-induced gelation of microfiber suspensions
Perazzo, A., Nunes, J. K., Guido, S., & Stone, H. A. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1710927114 · Cited by 72
Nakajima, S., Kawano, R., & Onoe, H. (2017) · Soft Matter · doi:10.1039/c7sm00279c · Cited by 70
Microfluidic generation of hollow Ca-alginate microfibers
Meng, Z., Wang, W., Xie, R., Ju, X., Liu, Z., & Chu, L. (2016) · Lab on a Chip · doi:10.1039/c6lc00640j · Cited by 68
He, X., Wang, W., Deng, K., Xie, R., Ju, X., Liu, Z., & Chu, L. (2014) · RSC Advances · doi:10.1039/c4ra10696b · Cited by 66
Generation of alginate microfibers with a roller-assisted microfluidic system
Su, J., Zheng, Y., & Wu, H. (2008) · Lab on a Chip · doi:10.1039/b813518e · Cited by 66
Interfacial Fabrication of Single-Crystalline ZnTe Nanorods with High Blue Fluorescence
Hou, L., Zhang, Q., Ling, L., Li, C., Chen, L., & Chen, S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4047476 · Cited by 66
Self-citationCosta‐Almeida, R., Gasperini, L., Borges, J., Babo, P. S., Rodrigues, M. T., Mano, J. F., Reis, R. L., & Gomes, M. E. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00331 · Cited by 65
Ahn, S. Y., Mun, C. H., & Lee, S. (2015) · RSC Advances · doi:10.1039/c4ra11438h · Cited by 64
One-Step Synthesis of FA-Directing FAPbBr3 Perovskite Nanocrystals toward High-Performance Display
Tong, Y.-L., Zhang, Y., Ma, K., Cheng, R., Wang, F., & Chen, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b10366 · Cited by 64
Self-citationThree-dimensional cell culture device utilizing thin membrane deformation by decompression
Anada, T., Masuda, T., Honda, Y., Fukuda, J., Arai, F., Fukuda, T., & Suzuki, O. (2010) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2010.01.065 · Cited by 58
Microfluidic generation of Buddha beads-like microcarriers for cell culture
Wang, J., Zou, M., Sun, L., Cheng, Y., Shang, L., Fu, F., & Zhao, Y. (2017) · Science China Materials · doi:10.1007/s40843-017-9081-5 · Cited by 57
Kitagawa, Y., Naganuma, Y., Yajima, Y., Yamada, M., & Seki, M. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035011 · Cited by 56
Microfluidic Control of the Internal Morphology in Nanofiber‐Based Macroscopic Cables
Kiriya, D., Kawano, R., Onoe, H., & Takeuchi, S. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201202078 · Cited by 56
A hollow fiber system for simple generation of human brain organoids
Zhu, Y., Wang, L., Yin, F., Yu, Y., Wang, Y., Liu, H., Wang, H., Sun, N., Liu, H., & Qin, J. (2017) · Integr. Biol. · doi:10.1039/c7ib00080d · Cited by 55
Microfluidic-Directed Hydrogel Fabrics Based on Interfibrillar Self-Healing Effects
Li, Q. F., Xu, Z. P., Du, X., et al. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03579 · Cited by 55
Self-citationJia, C., Yu, D., Lamarre, M., Leopold, P. L., Teng, Y. D., & Wang, H. (2014) · Advanced Materials · doi:10.1002/adma.201403509 · Cited by 53
Microfluidic fabrication of cell adhesive chitosan microtubes
Oh, J., Kim, K., Won, S. W., Cha, C., Gaharwar, A. K., Selimović, Š., Bae, H., Lee, K. H., Lee, D. H., Lee, S., et al. (2013) · Biomedical Microdevices · doi:10.1007/s10544-013-9746-z · Cited by 51
Hou, K., Wang, H., Lin, Y., Chen, S., Yang, S., Cheng, Y., Hsiao, B. S., & Zhu, M. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201600430 · Cited by 49
Self-citationFunctionalized core-shell hydrogel microsprings by anisotropic gelation with bevel-tip capillary
Yoshida, K., & Onoe, H. (2017) · Scientific Reports · doi:10.1038/srep45987 · Cited by 48
Microfluidic nozzle device for ultrafine fiber solution blow spinning with precise diameter control
Hofmann, E., Krüger, K., Haynl, C., Scheibel, T., Trebbin, M., & Förster, S. (2018) · Lab on a Chip · doi:10.1039/c8lc00304a · Cited by 48
Microfluidic wet-spinning of alginate microfibers: a theoretical analysis of fiber formation
Bonhomme, O., Leng, J., & Colin, A. (2012) · Soft Matter · doi:10.1039/c2sm25552a · Cited by 47
Angelozzi, M., Miotto, M., Penolazzi, L., Mazzitelli, S., Keane, T. J., Badylak, S. F., Piva, R., & Nastruzzi, C. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.06.004 · Cited by 46
Microarrays Formed by Microfluidic Spinning as Multidimensional Microreactors
Xu, L., Wang, C., & Chen, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310977 · Cited by 46
Self-citationSharifi, F. J., Bai, Z., Montazami, R., & Hashemi, N. N. (2016) · RSC Advances · doi:10.1039/c6ra09519d · Cited by 46
Yajima, Y., Lee, C. N., Yamada, M., Utoh, R., & Seki, M. (2018) · Journal of Bioscience and Bioengineering · doi:10.1016/j.jbiosc.2018.01.022 · Cited by 45
Nguyen, T. P. T., Tran, B. M., & Lee, N. Y. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb02031k · Cited by 45
Wen, G.-Q., Xie, R., Liang, W., He, X., Wang, W., Ju, X., & Chu, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.05.036 · Cited by 44
Park, D. Y., Mun, C. H., Kang, E., No, D. Y., Ju, J., & Lee, S. H. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024108 · Cited by 44
High-Performance Microsupercapacitors Based on Bioinspired Graphene Microfibers
Pan, H., Wang, D., Peng, Q., Ma, J., Meng, X., Zhang, Y., Ma, Y., Zhu, S., & Zhang, D. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01128 · Cited by 44
3D‐Printed Microfluidic Devices for Materials Science
Alizadehgiashi, M., Gevorkian, A., Tebbe, M., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800068 · Cited by 44
Kinetics of fiber solidification
Mercader, C., Lucas, A., Derré, A., Zakri, C., Moisan, S., Maugey, M., & Poulin, P. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003302107 · Cited by 42
Role of humidity on the structures and properties of regenerated silk fibers
Peng, Q., Shao, H., Hu, X., & Zhang, Y. (2015) · Progress in Natural Science Materials International · doi:10.1016/j.pnsc.2015.09.006 · Cited by 42
Rod‐Shaped Neural Units for Aligned 3D Neural Network Connection
Kato‐Negishi, M., Onoe, H., Ito, A., & Takeuchi, S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700143 · Cited by 41
Cui, T., Zhu, Z., Cheng, R., Tong, Y.-L., Peng, G., Wang, C., & Chen, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b11926 · Cited by 41
Self-citationTang, M.-J., Wang, W., Li, Z., Liu, Z., Guo, Z.-Y., Hua-yu, T., Liu, Z., Ju, X., Xie, R., & Chu, L. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b01755 · Cited by 40
Onoe, H., Kato‐Negishi, M., Itou, A., & Takeuchi, S. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500903 · Cited by 39
Zhang, X., Huang, C., Zhao, Y. Y., & Jin, X. (2017) · RSC Advances · doi:10.1039/c7ra06103j · Cited by 38
Microfluidic Spun Alginate Hydrogel Microfibers and Their Application in Tissue Engineering
Sun, T., Li, X., Shi, Q., Wang, H., Huang, Q., & Fukuda, T. (2018) · Gels · doi:10.3390/gels4020038 · Cited by 38
Sun, T., Huang, Q., Shi, Q., Wang, H., Liu, X., Seki, M., Nakajima, M., & Fukuda, T. (2015) · Microfluidics and Nanofluidics · doi:10.1007/s10404-015-1633-x · Cited by 37
Microfluidic fabrication of multiaxial microvessels via hydrodynamic shaping
Daniele, M. A.-A., Radom, K., Ligler, F. S., & Adams, A. A. (2014) · RSC Advances · doi:10.1039/c4ra03667k · Cited by 35
Electrospinning of functional materials for biomedicine and tissue engineering
Inozemtseva, O. A., Salkovskiy, Y., Severyukhina, A. N., Vidyasheva, I. V., Petrova, N. V., Metwally, H. A., Stetciura, I. Y., & Gorin, D. A. (2014) · Russian Chemical Reviews · doi:10.1070/rcr4435 · Cited by 34
Assembly of emulsion droplets into fibers by microfluidic wet spinning
Bell, R. V., Parkins, C. C., Young, R. A., Preuss, C. M., Stevens, M. M., & Bon, S. A. F. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08917d · Cited by 34
Peng, Q., Shao, H., Hu, X., & Zhang, Y. (2017) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700102 · Cited by 34
Sugimoto, M., Kitagawa, Y., Yamada, M., Yajima, Y., Utoh, R., & Seki, M. (2018) · Lab on a Chip · doi:10.1039/c7lc01280b · Cited by 34
Ozawa, F., Okitsu, T., & Takeuchi, S. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00619 · Cited by 33
Microfluidic Controlled Mass-Transfer and Buckling for Easy Fabrication of Polymeric Helical Fibers
Zhu, A., & Guo, M. (2016) · Macromolecular Rapid Communications · doi:10.1002/marc.201500632 · Cited by 29
Flexible Asymmetric Encapsulation for Dehydration‐Responsive Hybrid Microfibers
Chaurasia, A. S., & Sajjadi, S. (2016) · Small · doi:10.1002/smll.201600465 · Cited by 29
Fabrication of ordered konjac glucomannan microfiber arrays via facile microfluidic spinning method
Mu, R., Ni, Y., Wang, L., Yuan, Y., Yan, Z., Pang, J., & Chen, S. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.03.033 · Cited by 28
Self-citationZhang, X., Xie, R., Hu, W., Faraj, Y., Zhao, Q., Fan, X., Wang, W., Ju, X., Liu, Z., & Chu, L. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2677-6 · Cited by 28
Designing highly structured polycaprolactone fibers using microfluidics
Sharifi, F. J., Kurteshi, D., & Hashemi, N. N. (2016) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2016.04.005 · Cited by 27
Microchip-based 3D-cell culture using polymer nanofibers generated by solution blow spinning
Chen, C., Townsend, A. D., Sell, S. A., & Martin, R. S. (2017) · Analytical Methods · doi:10.1039/c7ay00756f · Cited by 27
Liu, M., Zhou, Z., Chai, Y., Zhang, S., Wu, X., Huang, S., Su, J., & Jiang, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa71da · Cited by 26
Fabrication of amphiphilic quantum dots towards high-colour-quality light-emitting devices
Cheng, R., Li, F., Zhang, J., She, X.-J., Zhang, Y., Shao, K., Lin, Y., Wang, C., & Chen, S. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc00113a · Cited by 25
Self-citationPham, U. H. T., Hanif, M., Asthana, A., & Iqbal, S. M. (2015) · Journal of Applied Physics · doi:10.1063/1.4919361 · Cited by 24
Microfluidic Generation of Bioinspired Spindle‐knotted Graphene Microfibers for Oil Absorption
Wu, Z., Wang, J., Zhao, Z., Yu, Y., Shang, L., & Zhao, Y. (2017) · ChemPhysChem · doi:10.1002/cphc.201700939 · Cited by 24
Jiang, M., Ju, X., Deng, K., Fan, X., He, X., Wu, F., He, F., Liu, Z., Wang, W., Xie, R., et al. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb00333h · Cited by 23
Microfluidic production of hyaluronic acid derivative microfibers to control drug release
Agnello, S., Gasperini, L., Reis, R. L., Mano, J. F., Pitarresi, G. L., Palumbo, F. S., & Giammona, G. (2016) · Materials Letters · doi:10.1016/j.matlet.2016.07.014 · Cited by 23
Um, E., Nunes, J. K., Pico, T., & Stone, H. A. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01666a · Cited by 22
Hydrogel microfibers with perfusable folded channels for tissue constructs with folded morphology
Liu, Y., Xu, P., Liang, Z., Xie, R., Ding, M., Liu, H., & Liang, Q. (2018) · RSC Advances · doi:10.1039/c8ra04192j · Cited by 21
Rapid prototyping of microchannels with surface patterns for fabrication of polymer fibers
Goodrich, P. J., Sharifi, F. J., & Hashemi, N. N. (2015) · RSC Advances · doi:10.1039/c5ra15154f · Cited by 19
Liu, W., Zhang, Y., Wang, C., & Chen, S. (2015) · RSC Advances · doi:10.1039/c5ra21095j · Cited by 19
Self-citationSun, T., Huang, Q., Shi, Q., Wang, H., Hu, C., Li, P., Nakajima, M., & Fukuda, T. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/10/105017 · Cited by 17
Continuous Jetting of Alginate Microfiber in Atmosphere Based on a Microfluidic Chip
Zhao, J.-Y., Xiong, W., Yu, N., & Yang, X. (2017) · Micromachines · doi:10.3390/mi8010008 · Cited by 17
Park, D., Park, J., Jang, H., Cheng, J., Kim, S. H., & Lee, S. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7307 · Cited by 17
Microfluidic spinning of the fibrous alginate scaffolds for modulation of the degradation profile
Mun, C. H., Hwang, J., & Lee, S. (2016) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-016-9048-7 · Cited by 16
Flexible Microfluidic Fabrication of Anisotropic Polymer Microfibers
Lan, W., Du, Y., Guo, X., Liu, A., Jing, S., & Li, S. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03745 · Cited by 16
Yoon, D. H., KOBAYASHI, K.-I., Tanaka, D., Sekiguchi, T., & Shoji, S. (2017) · Lab on a Chip · doi:10.1039/c7lc00157f · Cited by 15
Yoon, D. H., Tanaka, D., Sekiguchi, T., & Shoji, S. (2018) · Macromolecular Materials and Engineering · doi:10.1002/mame.201700516 · Cited by 8
Preparation and characterization of tunable oil-encapsulated alginate microfibers
Chaurasia, A. S., Jahanzad, F., & Sajjadi, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.04.069 · Cited by 6
Li, X., Shi, Q., Wang, H., Sun, T., Huang, Q., & Fukuda, T. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa92a1 · Cited by 5
Cited by
Bio-inspired hydrogels with fibrous structure: a review on design and biomedical applications
Chen, Y., Hao, Y., Mensah, A., Lv, P., & Wei, Q. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212799 · Cited by 46
Metadata
- Authors
- Du, X., Li, Q., Wu, G., & Chen, S.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2019-10
- Volume
- 31
- Issue
- 52
- Pages
- e1903733-e1903733
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2977980460
- Cited by
- 262
- References
- 187
- FWCI
- 6.89
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.