The DOI matches its Crossref record; 191 of the 191 references it cites were found in a registry or an index.
Recent Advances on High‐Entropy Alloys for 3D Printing
Open accessAbstract
Boosted by the success of high‐entropy alloys (HEAs) manufactured by conventional processes in various applications, the development of HEAs for 3D printing has been advancing rapidly in recent years. 3D printing of HEAs gives rise to a great potential for manufacturing geometrically complex HEA products with desirable performances, thereby inspiring their increased appearance in industrial applications. Herein, a comprehensive review of the recent achievements of 3D printing of HEAs is provided, in the aspects of their powder development, printing processes, microstructures, properties, and potential applications. It begins with the introduction of the fundamentals of 3D printing and HEAs, as well as the unique properties of 3D‐printed HEA products. The processes for the development of HEA powders, including atomization and mechanical alloying, and the powder properties, are then presented. Thereafter, typical processes for printing HEA products from powders, namely, directed energy deposition, selective laser melting, and electron beam melting, are discussed with regard to the phases, crystal features, mechanical properties, functionalities, and potential applications of these products (particularly in the aerospace, energy, molding, and tooling industries). Finally, perspectives are outlined to provide guidance for future research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Mechanical alloying and milling
Suryanarayana, C. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00010-9 · Cited by 8,075
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
A fracture-resistant high-entropy alloy for cryogenic applications
Gludovatz, B., Hohenwarter, A., Catoor, D., Chang, E. H., George, E. P., & Ritchie, R. O. (2014) · Science · doi:10.1126/science.1254581 · Cited by 5,714
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
Li, Z., Pradeep, K. G., Deng, Y., Raabe, D., & Tasan, C. C. (2016) · Nature · doi:10.1038/nature17981 · Cited by 4,071
Hall–Petch relation and boundary strengthening
Hansen, N. (2004) · Scripta Materialia · doi:10.1016/j.scriptamat.2004.06.002 · Cited by 3,799
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
Senkov, O. N., Wilks, G. B., Scott, J. M., & Miracle, D. B. (2011) · Intermetallics · doi:10.1016/j.intermet.2011.01.004 · Cited by 3,239
Laser additive manufacturing of metallic components: materials, processes and mechanisms
Gu, D. D., Meiners, W., Wissenbach, K., & Poprawe, R. (2012) · International Materials Reviews · doi:10.1179/1743280411y.0000000014 · Cited by 3,197
High-entropy alloy: challenges and prospects
Ye, Y. F., Wang, Q., Lu, J., Liu, C. T., & Yang, Y. (2016) · Materials Today · doi:10.1016/j.mattod.2015.11.026 · Cited by 3,016
3D printing of high-strength aluminium alloys
Martin, J. H., Yahata, B. D., Hundley, J. M., Mayer, J. A., Schaedler, T. A., & Pollock, T. M. (2017) · Nature · doi:10.1038/nature23894 · Cited by 2,950
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Khairallah, S. A., Anderson, A. T., Rubenchik, A., & King, W. E. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.02.014 · Cited by 2,766
Additively manufactured hierarchical stainless steels with high strength and ductility
Wang, Y. M., Voisin, T., McKeown, J. T., Ye, J., Calta, N. P., Li, Z., Zeng, Z., Zhang, Y., Chen, W., Roehling, T. T., et al. (2018) · Nature Materials · doi:10.1038/nmat5021 · Cited by 2,613
The metallurgy and processing science of metal additive manufacturing
Sames, W. J., List, F. A., Pannala, S., Dehoff, R. R., & Babu, S. S. (2016) · International Materials Reviews · doi:10.1080/09506608.2015.1116649 · Cited by 2,529
Additive manufacturing of Ti6Al4V alloy: A review
Liu, S., & Shin, Y. C. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107552 · Cited by 2,472
Review of selective laser melting: Materials and applications
Yap, C. Y., Chua, C. K., Dong, Z. L., Liu, Z. H., Zhang, D. Q., Loh, L. E., & Sing, S. L. (2015) · Applied Physics Reviews · doi:10.1063/1.4935926 · Cited by 2,353
Self-citationPrinting ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Recent progress in high-entropy alloys
Yeh, J.-W. (2006) · Annales de Chimie Science des Matériaux · doi:10.3166/acsm.31.633-648 · Cited by 2,117
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
Lei, Z., Liu, X., Wu, Y., Wang, H., Jiang, S., Wang, S., Hui, X., Wu, Y., Gault, B., Kontis, P., et al. (2018) · Nature · doi:10.1038/s41586-018-0685-y · Cited by 1,764
Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies
Murr, L. E., Gaytan, S. M., Ramirez, D. A., Martinez, E., Hernandez, J., Amato, K. N., Shindo, P. W., Medina, F. R., & Wicker, R. B. (2012) · Journal of Materials Science & Technology · doi:10.1016/s1005-0302(12)60016-4 · Cited by 1,686
He, J. Y., Liu, W. H., Wang, H., Wu, Y., Liu, X. J., Nieh, T. G., & Lu, Z. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.09.037 · Cited by 1,529
Wang, W.-R., Wang, W.-L., Wang, S.-C., Tsai, Y.-C., Lai, C.-H., & Yeh, J.-W. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.03.005 · Cited by 1,517
Carroll, B. E., Palmer, T. A., & Beese, A. M. (2015) · Acta Materialia · doi:10.1016/j.actamat.2014.12.054 · Cited by 1,507
Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys
Chuang, M.-H., Tsai, M.-H., Wang, W.-R., Lin, S.-J., & Yeh, J.-W. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.06.041 · Cited by 1,481
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Self-citationScience and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,131
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
Liu, L., Ding, Q., Zhong, Y., Zou, J., Wu, J., Chiu, Y.-L., Li, J., Zhang, Z., Yu, Q., & Shen, Z. (2018) · Materials Today · doi:10.1016/j.mattod.2017.11.004 · Cited by 1,127
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
Zhou, Y. J., Zhang, Y., Wang, Y. L., & Chen, G. L. (2007) · Applied Physics Letters · doi:10.1063/1.2734517 · Cited by 1,079
Materials for additive manufacturing
Bourell, D., Kruth, J. P., Leu, M., Levy, G., Rosen, D., Beese, A. M., & Clare, A. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.05.009 · Cited by 1,034
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
A review on fundamental of high entropy alloys with promising high–temperature properties
Chen, J., Zhou, X., Wang, W., Liu, B., Lv, Y., Yang, W., Xu, D., & Liu, Y. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.067 · Cited by 919
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
Self-citationGao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
Al-Bermani, S. S., Blackmore, M., Zhang, W., & Todd, I. (2010) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-010-0397-x · Cited by 860
(2016) · Springer eBooks · doi:10.1007/978-3-319-27013-5 · Cited by 759
Tan, X., Kok, Y., Tan, Y. J., Descoins, M., Mangelinck, D., Tor, S. B., Leong, K. F., & Chua, C. K. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.06.036 · Cited by 718
Self-citationNovel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
Wang, X. F., Zhang, Y., Qiao, Y., & Chen, G. L. (2007) · Intermetallics · doi:10.1016/j.intermet.2006.08.005 · Cited by 717
High-entropy Alloys with High Saturation Magnetization, Electrical Resistivity and Malleability
Zhang, Y., Zuo, T., Cheng, Y., & Liaw, P. K. (2013) · Scientific Reports · doi:10.1038/srep01455 · Cited by 690
Outstanding radiation resistance of tungsten-based high-entropy alloys
El-Atwani, O., Li, N., Li, M., Devaraj, A., Baldwin, J. K. S., Schneider, M. M., Sobieraj, D., Wróbel, J. S., Nguyen-Manh, D., Maloy, S. A., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav2002 · Cited by 658
Zhu, Z. G., Nguyen, Q. B., Ng, F. L., An, X. H., Liao, X. Z., Liaw, P. K., Nai, S. M. L., & Wei, J. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.05.015 · Cited by 653
Wu, S. W., Wang, G., Wang, Q., Jia, Y. D., Yi, J., Zhai, Q. J., Liu, J. B., Sun, B. A., Chu, H. J., Shen, J., et al. (2019) · Acta Materialia · doi:10.1016/j.actamat.2018.12.012 · Cited by 640
Kumar, N. A. P. K., Li, C., Leonard, K. J., Bei, H., & Zinkle, S. J. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.007 · Cited by 627
Sun, Z., Tan, X., Tor, S. B., & Chua, C. K. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0018-5 · Cited by 627
Self-citationZhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
Yu, W. H., Sing, S. L., Chua, C. K., Kuo, C. N., & Tian, X. L. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.04.006 · Cited by 586
Self-citationRaghavan, N., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., Carlson, N., & Babu, S. S. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.03.063 · Cited by 573
Li, R., Niu, P., Yuan, T., Cao, P., Chen, C., & Zhou, K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.02.298 · Cited by 572
Self-citationDiscovery of a Superconducting High-Entropy Alloy
Koželj, P., Vrtnik, S., Jelen, A., Jazbec, S., Jagličić, Z., Maiti, S., Feuerbacher, M., Steurer, W., & Dolinšek, J. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.107001 · Cited by 552
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
High‐Entropy Alloys: Potential Candidates for High‐Temperature Applications – An Overview
Praveen, S., & Kim, H. S. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700645 · Cited by 526
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Self-citationHydrogen absorption by Laves phase related BCC solid solution
Akiba, E., & Iba, H. (1998) · Intermetallics · doi:10.1016/s0966-9795(97)00088-5 · Cited by 504
Superior hydrogen storage in high entropy alloys
Sahlberg, M., Karlsson, D., Zlotea, C., & Jansson, U. (2016) · Scientific Reports · doi:10.1038/srep36770 · Cited by 504
High-entropy alloys by mechanical alloying: A review
Vaidya, M., Muralikrishna, G. M., & Murty, B. S. (2019) · Journal of Materials Research · doi:10.1557/jmr.2019.37 · Cited by 492
Song, B., Zhao, X., Li, S., Han, C., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2015) · Frontiers of Mechanical Engineering · doi:10.1007/s11465-015-0341-2 · Cited by 427
Self-citationOlakanmi, E. O. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.03.009 · Cited by 418
Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys
Sathiyamoorthi, P., Murty, B. S., & Kottada, R. S. (2011) · Materials Science and Engineering A · doi:10.1016/j.msea.2011.11.044 · Cited by 411
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
Self-citationBermingham, M. J., Kent, D., Zhan, H., et al. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.03.035 · Cited by 398
Saedi, S., Moghaddam, N. S., Amerinatanzi, A., Elahinia, M., & Karaca, H. E. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.10.072 · Cited by 391
3D‐Printed Mechanical Metamaterials with High Energy Absorption
Yuan, S., Chua, C. K., & Zhou, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800419 · Cited by 380
Self-citationVaralakshmi, S., Kamaraj, M., & Murty, B. S. (2008) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2007.05.104 · Cited by 366
Hrabe, N., Gnäupel-Herold, T., & Quinn, T. (2017) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2016.04.022 · Cited by 355
Joseph, J., Jarvis, T., Wu, X., Stanford, N., Hodgson, P., & Fabijanic, D. M. (2015) · Materials Science and Engineering: A · doi:10.1016/j.msea.2015.02.072 · Cited by 343
Simonelli, M., Tuck, C., Aboulkhair, N. T., Maskery, I., Ashcroft, I., Wildman, R. D., & Hague, R. (2015) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-015-2882-8 · Cited by 342
Two-Way 4D Printing: A Review on the Reversibility of 3D-Printed Shape Memory Materials
Lee, A. Y., An, J., & Chua, C. K. (2017) · Engineering · doi:10.1016/j.eng.2017.05.014 · Cited by 326
Self-citationBorkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
Design of D022 superlattice with superior strengthening effect in high entropy alloys
He, F., Chen, D., Han, B., Wu, Q., Wang, Z., Wei, S., Wei, D., Wang, J., Liu, C. T., & Kai, J.-J. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.01.048 · Cited by 322
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Hydrogen storage properties of multi-principal-component CoFeMnTixVyZrz alloys
Kao, Y.-F., Chen, S.-K., Sheu, J.-H., Lin, J.-T., Lin, W.-E., Yeh, J.-W., Lin, S.-J., Liou, T.-H., & Wang, C.-W. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.012 · Cited by 304
Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.01.213 · Cited by 304
Yu, W., Sing, S. L., Chua, C. K., & Tian, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.04.017 · Cited by 303
Self-citationA literature review of powder-based electron beam melting focusing on numerical simulations
Galati, M., & Iuliano, L. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.11.001 · Cited by 300
Chua, C. K., & Leong, K. F. (2017) · WORLD SCIENTIFIC eBooks · doi:10.1142/10200 · Cited by 294
Self-citationKang, B., Lee, J., Ryu, H. J., & Hong, S. H. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.12.021 · Cited by 292
Ji, W., Fu, Z., Wang, W., Wang, H., Zhang, J., Wang, Y., & Zhang, F. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.11.146 · Cited by 290
Print Me An Organ! Why We Are Not There Yet
Ng, W. L., Chua, C. K., & Shen, Y.-F. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101145 · Cited by 287
Self-citationMetallic Nanoparticle Inks for 3D Printing of Electronics
Tan, H. W., An, J., Chua, C. K., & Tran, T. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800831 · Cited by 286
Self-citationZhang, A., Han, J., Su, B., Li, P., & Meng, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.11.072 · Cited by 285
Chou, Y. L., Wang, Y. C., Yeh, J. W., & Shih, H. C. (2010) · Corrosion Science · doi:10.1016/j.corsci.2010.06.025 · Cited by 284
The potential to enhance membrane module design with 3D printing technology
Lee, J.-Y., Tan, W. S., An, J., Chua, C. K., Tang, C. Y., Fane, A. G., & Chong, T. H. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.11.008 · Cited by 283
Self-citationKunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement
Zhao, Y., Lee, D.-H., Seok, M.-Y., Lee, J.-A., Phaniraj, M. P., Suh, J.-Y., Ha, H.-Y., Kim, J.-Y., Ramamurty, U., & Jang, J.-I. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.03.029 · Cited by 267
Chen, Y., Hu, Y.-H., Hsieh, C., Yeh, J., & Chen, S.-K. (2009) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2009.03.087 · Cited by 257
Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy
Luo, H., Li, Z., & Raabe, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-10774-4 · Cited by 257
Additive Manufacturing of High-Entropy Alloys: A Review
Chen, S., Tong, Y., & Liaw, P. K. (2018) · Entropy · doi:10.3390/e20120937 · Cited by 257
Hydrogen sorption in TiZrNbHfTa high entropy alloy
Zlotea, C., Sow, M. A., Ek, G., Couzinié, J.-P., Perrière, L., Guillot, I., Bourgon, J., Møller, K. T., Jensen, T. R., Akiba, E., et al. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.108 · Cited by 252
Rare-earth high-entropy alloys with giant magnetocaloric effect
Yuan, Y., Wu, Y., Tong, X., Zhang, H., Wang, H., Liu, X. J., Ma, L., Suo, H. L., & Lu, Z. P. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.12.021 · Cited by 251
Chew, Y., Bi, G. J., Zhu, Z. G., Ng, F. L., Weng, F., Liu, S. B., Nai, S. M. L., & Lee, B. Y. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.12.005 · Cited by 249
Niu, P. D., Li, R. D., Yuan, T. C., Zhu, S. Y., Chen, C., Wang, M. B., & Huang, L. (2019) · Intermetallics · doi:10.1016/j.intermet.2018.10.018 · Cited by 247
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Laser processing of SiC-particle-reinforced coating on titanium
Das, M., Balla, V. K., Basu, D., Bose, S., & Bandyopadhyay, A. (2010) · Scripta Materialia · doi:10.1016/j.scriptamat.2010.04.044 · Cited by 233
Joo, S.-H., Kato, H., Jang, M. J., Moon, J., Kim, E. B., Hong, S.-J., & Kim, H. S. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.010 · Cited by 227
Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder
Wang, P., Huang, P., Ng, F. L., Sin, W. J., Lu, S., Nai, M. L. S., Dong, Z., & Wei, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2018.107576 · Cited by 215
Luo, H., Lu, W., Fang, X., Ponge, D., Li, Z., & Raabe, D. (2018) · Materials Today · doi:10.1016/j.mattod.2018.07.015 · Cited by 212
Kunce, I., Polański, M., Karczewski, K., Płociński, T., & Kurzydłowski, K. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.144 · Cited by 206
Karthik, G. M., Panikar, S., Ram, G. D. J., & Kottada, R. S. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.10.038 · Cited by 205
Sharma, A. S., Yadav, S., Biswas, K., & Basu, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.003 · Cited by 205
Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., Kuwabara, K., Kato, T., & Chiba, A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.019 · Cited by 203
Haase, C., Tang, F., Wilms, M. B., Weisheit, A., & Hallstedt, B. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.01.099 · Cited by 200
Zhou, R., Liu, Y., Zhou, C., Li, S., Wu, W., Song, M. J., Liu, B., Liang, X., & Liaw, P. K. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.002 · Cited by 199
Irradiation Behavior in High Entropy Alloys
Xia, S.-Q., Wang, Z., Yang, T.-F., & Zhang, Y. (2015) · Journal of Iron and Steel Research International · doi:10.1016/s1006-706x(15)30084-4 · Cited by 198
Dehoff, R. R., & Babu, S. S. (2010) · Acta Materialia · doi:10.1016/j.actamat.2010.03.006 · Cited by 197
Kim, Y.-K., Choe, J., & Lee, K.-A. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.07.106 · Cited by 197
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Self-citationFujieda, T., Shiratori, H., Kuwabara, K., Kato, T., Yamanaka, K., Koizumi, Y., & Chiba, A. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.06.046 · Cited by 194
An Insight into Evolution of Light Weight High Entropy Alloys: A Review
Kumar, A., & Gupta, M. (2016) · Metals · doi:10.3390/met6090199 · Cited by 188
Joseph, J., Hodgson, P., Jarvis, T., Wu, X., Stanford, N., & Fabijanic, D. M. (2018) · Materials Science and Engineering: A · doi:10.1016/j.msea.2018.07.036 · Cited by 188
Short communication: ‘Low activation, refractory, high entropy alloys for nuclear applications’
Kareer, A., Waite, J. C., Li, B., Couet, A., Armstrong, D. E. J., & Wilkinson, A. J. (2019) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2019.151744 · Cited by 187
Additive Manufacturing of Metals
Milewski, J. O. (2017) · Springer series in materials science · doi:10.1007/978-3-319-58205-4 · Cited by 186
Wolff, S. J., Lin, S., Faierson, E. J., Liu, W. K., Wagner, G. J., & Cao, J. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.027 · Cited by 185
Weldability of a high entropy CrMnFeCoNi alloy
Wu, Z., David, S. A., Feng, Z., & Bei, H. (2016) · Scripta Materialia · doi:10.1016/j.scriptamat.2016.06.046 · Cited by 183
3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
Kenel, C., Casati, N. P. M., & Dunand, D. C. (2019) · Nature Communications · doi:10.1038/s41467-019-08763-4 · Cited by 183
Development of a novel high-entropy alloy with eminent efficiency of degrading azo dye solutions
Lv, Z. Y., Liu, X. J., Jia, B., Wang, H., Wu, Y., & Lu, Z. P. (2016) · Scientific Reports · doi:10.1038/srep34213 · Cited by 182
Dobbelstein, H., Gurevich, E. L., George, E. P., Ostendorf, A., & Laplanche, G. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.042 · Cited by 179
Liu, B., Wang, J., Liu, Y., Fang, Q., Wu, Y., Chen, S., & Liu, C. T. (2016) · Intermetallics · doi:10.1016/j.intermet.2016.05.006 · Cited by 177
Self-citationWu, W., Zhou, R., Wei, B., Ni, S., Liu, Y., & Song, M. J. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.08.019 · Cited by 177
A review of printed passive electronic components through fully additive manufacturing methods
Tan, H., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1217586 · Cited by 175
Self-citationSun, Z., Tan, X. P., Descoins, M., Mangelinck, D., Tor, S. B., & Lim, C. S. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.04.036 · Cited by 173
Self-citationKuwabara, K., Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., & Chiba, A. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.06.006 · Cited by 170
Luo, S., Gao, P., Yu, H., Yang, J., Wang, Z., & Zeng, X. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.290 · Cited by 170
Mostafaei, A., Toman, J., Stevens, E. L., Hughes, E. T., Krimer, Y. L., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.021 · Cited by 169
Additive Manufacturing of High-Entropy Alloys by Laser Processing
Ocelík, V., Janssen, N., Smith, S. N., & De Hosson, J. T. M. (2016) · JOM · doi:10.1007/s11837-016-1888-z · Cited by 166
On the machining of selective laser melting CoCrFeMnNi high-entropy alloy
Guo, J., Goh, M., Zhu, Z., Lee, X., Nai, M. L. S., & Wei, J. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.012 · Cited by 165
Phase stability and microstructures of high entropy alloys ion irradiated to high doses
Xia, S., Gao, M. C., Yang, T., Liaw, P. K., & Zhang, Y. (2016) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2016.08.017 · Cited by 164
High-entropy alloys as high-temperature thermoelectric materials
Shafeie, S., Guo, S., Hu, Q., Fahlquist, H., Erhart, P., & Palmqvist, A. (2015) · Journal of Applied Physics · doi:10.1063/1.4935489 · Cited by 162
Thermoelectric high-entropy alloys with low lattice thermal conductivity
Fan, Z., Wang, H., Wu, Y., Liu, X., & Lü, Z. (2016) · RSC Advances · doi:10.1039/c5ra28088e · Cited by 152
Li, X. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700874 · Cited by 151
Gu, D., Wang, Z., Shen, Y., Li, Q., & Li, Y. (2009) · Applied Surface Science · doi:10.1016/j.apsusc.2009.07.008 · Cited by 150
Moravčík, I., Čížek, J., Zapletal, J., Kováčová, Z., Veselý, J., Minárik, P., Kitzmantel, M., Neubauer, E., & Dlouhý, I. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.036 · Cited by 149
Mostafaei, A., Kimes, K. A., Stevens, E. L., Toman, J., Krimer, Y. L., Ullakko, K., & Chmielus, M. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.04.010 · Cited by 149
Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., Alam, T., Ramanujan, R. V., & Banerjee, R. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700048 · Cited by 148
Kuo, C. N., Chua, C. K., Peng, P. C., Chen, Y.-W., Sing, S. L., Huang, S., & Su, Y. L. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2019.1698967 · Cited by 146
Self-citationEffects of temperature on the irradiation responses of Al0.1CoCrFeNi high entropy alloy
Yang, T., Xia, S., Guo, W. H., Hu, R., Poplawsky, J. D., Sha, G., Fang, Y., Yan, Z., Wang, C., Li, C., et al. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.09.025 · Cited by 144
Hu, C., Chen, W., Liu, X., Tang, Q., Xie, Y., & Dai, P. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.02.040 · Cited by 142
Li, J., Xiang, S., Luan, H., Amar, A., Liu, X., Lu, S., Zeng, Y., Le, G., Wang, X., Qu, F., et al. (2019) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2019.05.062 · Cited by 142
Structure and properties of lightweight high entropy alloys: a brief review
Maulik, O., Kumar, D., Kumar, S., Dewangan, S. K., & Kumar, V. (2018) · Materials Research Express · doi:10.1088/2053-1591/aabbca · Cited by 139
Mechano-chemical synthesis, thermal stability and phase evolution in AlCoCrFeNiMn high entropy alloy
Shivam, V., Basu, J., Shadangi, Y., Singh, M. K., & Mukhopadhyay, N. K. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.057 · Cited by 136
Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder
Liu, Y., Wang, J., Fang, Q., Liu, B., Wu, Y., & Chen, S. (2015) · Intermetallics · doi:10.1016/j.intermet.2015.08.012 · Cited by 133
Self-citationYang, P., Liu, Y., Zhao, X., Cheng, J., & Li, H. (2016) · Advanced Powder Technology · doi:10.1016/j.apt.2016.03.023 · Cited by 113
Lu, T., Scudino, S., Chen, W., Wang, P., Li, D., Mao, M., Kang, L., Liu, Y., & Fu, Z. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.04.080 · Cited by 109
Zhong, Y., Rännar, L., Wikman, S., Koptyug, A. V., Liu, L., Cui, D., & Shen, Z. J. (2017) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2017.01.032 · Cited by 105
Xiang, C., Han, E., Zhang, Z. M., Fu, H., Wang, J. Q., Zhang, H., & Hu, G. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.11.001 · Cited by 104
Mohanty, A., Sampreeth, J. K., Bembalge, O. B., Hascoët, J.-Y., Marya, S. K., Immanuel, R. J., & Panigrahi, S. K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125028 · Cited by 104
Mahshid, R., Hansen, H. N., & Højbjerre, K. L. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.05.020 · Cited by 102
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., & Banerjee, R. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.01.009 · Cited by 101
Han, C., Wang, Q., Song, B., Li, W., Wei, Q., Wen, S., Liu, J., & Shi, Y. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.02.021 · Cited by 100
Self-citationMicrostructures and hydrogen storage properties of La Ni Fe V Mn alloys
Kunce, I., Polański, M., & Czujko, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.039 · Cited by 99
Yang, C., Zhang, C., & Liu, L. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07973k · Cited by 99
Li, T., Liu, Y., Liu, B., Guo, W., & Xu, L. (2017) · Coatings · doi:10.3390/coatings7090151 · Cited by 96
Mishra, R. K., & Shahi, R. R. (2017) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2017.06.124 · Cited by 92
Zhang, B., Duan, Y., Cui, Y., Ma, G., Wang, T., & Dong, X. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.04.018 · Cited by 91
Han, C., Yao, Y., Cheng, X., Luo, J., Luo, P., Wang, Q., Yang, F., Wei, Q., & Zhang, Z. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b01091 · Cited by 88
Self-citationBinder jetting of the AlCoCrFeNi alloy
Karlsson, D., Lindwall, G., Lundbäck, A., Amnebrink, M., Boström, M., Riekehr, L., Schuisky, M., Sahlberg, M., & Jansson, U. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.010 · Cited by 87
Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend
Popov, V. V., Katz‐Demyanetz, A., Koptyug, A. V., & Bamberger, M. (2019) · Heliyon · doi:10.1016/j.heliyon.2019.e01188 · Cited by 86
Han, C., Yan, C., Wen, S., Xu, T. N., Li, S., Liu, J., Wei, Q., & Shi, Y. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2015-0114 · Cited by 83
Self-citationTian, L., Fu, M. W., & Xiong, W. (2018) · Materials · doi:10.3390/ma11020320 · Cited by 82
Enhanced Strength of a Mechanical Alloyed NbMoTaWVTi Refractory High Entropy Alloy
Long, Y., Su, K., Zhang, J., Liang, X., Peng, H., & Li, X. (2018) · Materials · doi:10.3390/ma11050669 · Cited by 82
Additive manufactured new hybrid high entropy alloys derived from the AlCoFeNiSmTiVZr system
Sarswat, P. K., Sarkar, S., Murali, A., Huang, W., Tan, W., & Free, M. L. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.12.300 · Cited by 81
Electron-irradiation-induced structural change in Zr–Hf–Nb alloy
Nagase, T., Anada, S., Rack, P. D., Noh, J. H., Yasuda, H., Mori, H., & Egami, T. (2012) · Intermetallics · doi:10.1016/j.intermet.2012.02.015 · Cited by 79
High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties
Gao, L., Song, J. Y., Jiao, Z., Liao, W., Luan, J., Surjadi, J. U., Li, J., Zhang, H., Sun, D. B., Liu, C. T., et al. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700625 · Cited by 79
Salemi, F., Abbasi, M. H., & Karimzadeh, F. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.05.274 · Cited by 76
Yang, X., Zhou, Y. J., Xi, S., Chen, Z., Wei, P., He, C., Li, T., Gao, Y., & Wu, H. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138394 · Cited by 75
Zhao, R., Ren, B., Zhang, G., Liu, Z., & Zhang, J. (2018) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2018.07.072 · Cited by 73
Ewald, S., Kies, F., Hermsen, S., Voshage, M., Haase, C., & Schleifenbaum, J. H. (2019) · Materials · doi:10.3390/ma12101706 · Cited by 73
Compositionally graded high entropy alloy with a strong front and ductile back
Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., & Banerjee, R. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100602 · Cited by 68
Corrosion Behavior of Selectively Laser Melted CoCrFeMnNi High Entropy Alloy
Ren, J., Mahajan, C., Liu, L., Follette, D., Chen, W., & Mukherjee, S. (2019) · Metals · doi:10.3390/met9101029 · Cited by 68
Ge, W., Wu, B., Wang, S., Xu, S., Shang, C., Zhang, Z., & Wang, Y. (2017) · Advanced Powder Technology · doi:10.1016/j.apt.2017.07.006 · Cited by 62
Alcalá, M. D., Real, C., Fombella, I., Trigo, I., & Córdoba, J. M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.03.358 · Cited by 57
Wear behavior of high entropy alloys containing soft dispersoids (Pb, Bi)
Yadav, S., Kumar, A., & Biswas, K. (2017) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2017.06.020 · Cited by 56
Different-Shaped Ultrafine MoNbTaW HEA Powders Prepared via Mechanical Alloying
Tong, Y., Qi, P., Liang, X., Chen, Y., Hu, Y., & Hu, Z. (2018) · Materials · doi:10.3390/ma11071250 · Cited by 56
Nanomechanical studies of high-entropy alloys
Zou, Y. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.155 · Cited by 49
Xu, J. H., Axinte, E. M., Zhao, Z., & Wang, Y. (2016) · Journal of Magnetism and Magnetic Materials · doi:10.1016/j.jmmm.2016.04.067 · Cited by 48
Sun, C., Li, P., Xi, S., Zhou, Y. J., Li, S., & Yang, X. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.05.022 · Cited by 48
Nam, S., Kim, M. J., Hwang, J. Y., & Choi, H. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.05.180 · Cited by 47
High entropy multicomponent WMoNbZrV alloy processed by mechanical alloying
Oleszak, D., Antolak‐Dudka, A., & Kulik, T. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.08.060 · Cited by 44
Zhang, B., Duan, Y., Cui, Y., Ma, G., Wang, T., & Dong, X. (2018) · RSC Advances · doi:10.1039/c8ra01762j · Cited by 43
Raza, A., Kang, B., Lee, J.-H., Ryu, H. J., & Hong, S. H. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.036 · Cited by 40
Shafeie, S., Guo, S. L., Erhart, P., Hu, Q., & Palmqvist, A. E. C. (2018) · Advanced Materials · doi:10.1002/adma.201805392 · Cited by 40
Gómez-Esparza, C. D., Baldenebro-López, F. J., González-Rodelas, L., Baldenebro-López, J., & Martínez-Sánchez, R. (2016) · Materials Research · doi:10.1590/1980-5373-mr-2015-0668 · Cited by 32
Kumar, D., Maulik, O., Bagri, A. S., Prasad, Y. V. S. S., & Kumar, V. (2016) · Materials Today Proceedings · doi:10.1016/j.matpr.2016.09.005 · Cited by 31
Wang, W., Li, B., Zhai, S., Xu, J., Niu, Z., Xu, J. H., & Wang, Y. (2018) · Metals and Materials International · doi:10.1007/s12540-018-0047-1 · Cited by 30
Kaplanskii, Y. Y., Korotitskiy, A., Levashov, E. A., et al. (2018) · Materials Science and Engineering A · doi:10.1016/j.msea.2018.05.087 · Cited by 30
Karg, M. C. H., Munk, A., Ahuja, B., Backer, M. V., Schmitt, J. P., Stengel, C., Kuryntsev, S. V., & Schmidt, M. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.08.045 · Cited by 28
Garechana, G., Belver, R. M. R., Bildosola, I., & Carrasco, E. C. (2019) · PLoS ONE · doi:10.1371/journal.pone.0210441 · Cited by 18
Cited by
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Mallakpour, S., Azadi, E., & Hussain, C. M. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102436 · Cited by 178
Kim, J. H., Hidayati, R., Jung, S.-G., Salawu, Y. A., Kim, H.-J., Yun, J. H., & Rhyee, J.-S. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.117971 · Cited by 38
Metadata
- Authors
- Han, C., Fang, Q., Shi, Y., Tor, S. B., Chua, C. K., & Zhou, K.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-05-20
- Volume
- 32
- Issue
- 26
- Pages
- e1903855-e1903855
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3026701187
- Cited by
- 486
- References
- 191
- FWCI
- 33.67
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.