The DOI matches its Crossref record; 110 of the 110 references it cites were found in a registry or an index.
MXene Printing and Patterned Coating for Device Applications
Abstract
As a thriving member of the 2D nanomaterials family, MXenes, i.e., transition metal carbides, nitrides, and carbonitrides, exhibit outstanding electrochemical, electronic, optical, and mechanical properties. They have been exploited in many applications including energy storage, electronics, optoelectronics, biomedicine, sensors, and catalysis. Compared to other 2D materials, MXenes possess a unique set of properties such as high metallic conductivity, excellent dispersion quality, negative surface charge, and hydrophilicity, making them particularly suitable as inks for printing applications. Printing and pre/post‐patterned coating methods represent a whole range of simple, economically efficient, versatile, and eco‐friendly manufacturing techniques for devices based on MXenes. Moreover, printing can allow for complex 3D architectures and multifunctionality that are highly required in various applications. By means of printing and patterned coating, the performance and application range of MXenes can be dramatically increased through careful patterning in three dimensions; thus, printing/coating is not only a device fabrication tool but also an enabling tool for new applications as well as for industrialization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
2D materials and van der Waals heterostructures
Novoselov, K. S., Mishchenko, A., Carvalho, A., & Castro Neto, A. H. (2016) · Science · doi:10.1126/science.aac9439 · Cited by 7,434
25th Anniversary Article: MXenes: A New Family of Two‐Dimensional Materials
Naguib, M., Mochalin, V. N., Barsoum, M. W., & Gogotsi, Y. (2014) · Advanced Materials · doi:10.1002/adma.201304138 · Cited by 6,414
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
Tan, C., Cao, X., Wu, X.-J., He, Q., Yang, J., Zhang, X., Chen, J., Zhao, W., Han, S., Nam, G.-H., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00558 · Cited by 5,100
Guidelines for Synthesis and Processing of Two-Dimensional Titanium Carbide (Ti3C2Tx MXene)
Alhabeb, M., Maleski, K., Anasori, B., Lelyukh, P., Clark, L., Sin, S., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b02847 · Cited by 5,045
Two-Dimensional Transition Metal Carbides
Naguib, M., Mashtalir, O., Carle, J., Presser, V., Lu, J., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2012) · ACS Nano · doi:10.1021/nn204153h · Cited by 4,769
Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes
Lipomi, D. J., Vosgueritchian, M., Tee, B. C.-K., Hellstrom, S. L., Lee, J. A., Fox, C. H., & Bao, Z. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.184 · Cited by 3,188
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Ultrathin Two-Dimensional Nanomaterials
Zhang, H. (2015) · ACS Nano · doi:10.1021/acsnano.5b05040 · Cited by 2,167
Two-Dimensional, Ordered, Double Transition Metals Carbides (MXenes)
Anasori, B., Xie, Y., Beidaghi, M., Lu, J., Hosler, B. C., Hultman, L., Kent, P. R. C., Gogotsi, Y., & Barsoum, M. W. (2015) · ACS Nano · doi:10.1021/acsnano.5b03591 · Cited by 2,110
Novel Electronic and Magnetic Properties of Two‐Dimensional Transition Metal Carbides and Nitrides
Khazaei, M., Arai, M., Sasaki, T., Chung, C., Venkataramanan, N. S., Estili, M., Sakka, Y., & Kawazoe, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202502 · Cited by 1,998
Applications of 2D MXenes in energy conversion and storage systems
Pang, J., Mendes, R. G., Bachmatiuk, A., Zhao, L., Ta, H. Q., Gemming, T., Liu, H., Liu, Z., & Rummeli, M. H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00324f · Cited by 1,951
MXene Ti3C2: An Effective 2D Light-to-Heat Conversion Material
Li, R., Zhang, L., Shi, L., & Wang, P. (2017) · ACS Nano · doi:10.1021/acsnano.6b08415 · Cited by 1,798
Lipatov, A., Alhabeb, M., Lukatskaya, M. R., Boson, A., Gogotsi, Y., & Sinitskii, A. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201600255 · Cited by 1,751
Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Transparent Conductive Two-Dimensional Titanium Carbide Epitaxial Thin Films
Halim, J., Lukatskaya, M. R., Cook, K. M., Lu, J., Smith, C. R., Näslund, L.-Å., May, S. J., Hultman, L., Gogotsi, Y., Eklund, P., et al. (2014) · Chemistry of Materials · doi:10.1021/cm500641a · Cited by 1,698
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Fluorine‐Free Synthesis of High‐Purity Ti3C2Tx (T=OH, O) via Alkali Treatment
Li, T., Yao, L., Liu, Q., Gu, J., Luo, R., Li, J., Yan, X., Wang, W., Liu, P., Chen, B., et al. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800887 · Cited by 1,457
Synthesis and Characterization of 2D Molybdenum Carbide (MXene)
Halim, J., Kota, S., Lukatskaya, M. R., Naguib, M., Zhao, M., Moon, E. J., Pitock, J., Nanda, J., May, S. J., Gogotsi, Y., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505328 · Cited by 1,432
Control of MXenes’ electronic properties through termination and intercalation
Hart, J. L., Hantanasirisakul, K., Lang, A. C., Anasori, B., Pinto, D., Pivak, Y., van Omme, J. T., May, S. J., Gogotsi, Y., & Taheri, M. L. (2019) · Nature Communications · doi:10.1038/s41467-018-08169-8 · Cited by 1,342
Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)
Hantanasirisakul, K., & Gogotsi, Y. (2018) · Advanced Materials · doi:10.1002/adma.201804779 · Cited by 1,325
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
Highly conductive paper for energy-storage devices
Hu, L., Choi, J. W., Yang, Y., Jeong, S., La Mantia, F., Cui, L.-F., & Cui, Y. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0908858106 · Cited by 1,224
Inkjet-Printed Graphene Electronics
Torrisi, F., Hasan, T., Wu, W., Sun, Z., Lombardo, A., Kulmala, T. S., Hsieh, G.-W., Jung, S., Bonaccorso, F., Paul, P. J., et al. (2012) · ACS Nano · doi:10.1021/nn2044609 · Cited by 1,195
Dispersions of Two-Dimensional Titanium Carbide MXene in Organic Solvents
Maleski, K., Mochalin, V. N., & Gogotsi, Y. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04830 · Cited by 1,033
Cai, Y., Shen, J., Ge, G., Zhang, Y., Jin, W., Huang, W., Shao, J., Yang, J., & Dong, X. (2018) · ACS Nano · doi:10.1021/acsnano.7b06251 · Cited by 929
Self-citationDye adsorption and decomposition on two-dimensional titanium carbide in aqueous media
Mashtalir, O., Cook, K. M., Mochalin, V. N., Crowe, M., Barsoum, M. W., & Gogotsi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02638a · Cited by 806
MXenes stretch hydrogel sensor performance to new limits
Zhang, Y.-Z., Lee, K. H., Anjum, D. H., Sougrat, R., Jiang, Q., Kim, H., & Alshareef, H. N. (2018) · Science Advances · doi:10.1126/sciadv.aat0098 · Cited by 783
Self-citationRecent Progress in Materials and Devices toward Printable and Flexible Sensors
Rim, Y. S., Bae, S., Chen, H., De Marco, N., & Yang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505118 · Cited by 771
Antioxidants Unlock Shelf-Stable Ti3C2T (MXene) Nanosheet Dispersions
Zhao, X., Vashisth, A., Prehn, E., Sun, W., Shah, S. A., Habib, T., Chen, Y., Tan, Z., Lutkenhaus, J. L., Radovic, M., et al. (2019) · Matter · doi:10.1016/j.matt.2019.05.020 · Cited by 747
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
MXene: An emerging material for sensing and biosensing
Sinha, A., Dhanjai, Zhao, H., Huang, Y., Lu, X., Chen, J., & Jain, R. (2018) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2018.05.021 · Cited by 721
Printable Transparent Conductive Films for Flexible Electronics
Li, D., Lai, W., Zhang, Y., & Huang, W. (2018) · Advanced Materials · doi:10.1002/adma.201704738 · Cited by 714
Self-citationLian, P., Dong, Y., Wu, Z.-S., Zheng, S., Wang, X., Wang, S., Sun, C., Qin, J., Shi, X., & Bao, X. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.002 · Cited by 712
MoS2‐on‐MXene Heterostructures as Highly Reversible Anode Materials for Lithium‐Ion Batteries
Chen, C., Xie, X., Anasori, B., Sarycheva, A., Makaryan, T., Zhao, M., Urbankowski, P., Miao, L., Jiang, J., & Gogotsi, Y. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201710616 · Cited by 710
All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage
Peng, Y.-Y., Akuzum, B., Kurra, N., Zhao, M.-Q., Alhabeb, M., Anasori, B., Kumbur, E. C., Alshareef, H. N., Ger, M.-D., & Gogotsi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01717g · Cited by 697
Self-citationPen‐on‐Paper Flexible Electronics
Russo, A., Ahn, B. Y., Adams, J. J., Duoss, E. B., Bernhard, J. T., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201101328 · Cited by 696
Preparation of 2D material dispersions and their applications
Cai, X., Luo, Y., Liu, B., & Cheng, H.-M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00254a · Cited by 665
Organic materials for printed electronics
Berggren, M., Nilsson, D., & Robinson, N. D. (2007) · Nature Materials · doi:10.1038/nmat1817 · Cited by 663
Synthesis and characterization of two-dimensional Nb4C3 (MXene)
Ghidiu, M., Naguib, M., Shi, C., Mashtalir, O., Pan, L. M., Zhang, B., Yang, J., Gogotsi, Y., Billinge, S. J. L., & Barsoum, M. W. (2014) · Chem. Commun. · doi:10.1039/c4cc03366c · Cited by 657
Flexible supercapacitors based on paper substrates: a new paradigm for low-cost energy storage
Zhang, Y.-Z., Wang, Y., Cheng, T., Lai, W.-Y., Pang, H., & Huang, W. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00174a · Cited by 638
Self-citationStamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
Oxidation stability of Ti3C2Tx MXene nanosheets in solvents and composite films
Habib, T., Zhao, X., Shah, S. A., Chen, Y., Sun, W., An, H., Lutkenhaus, J. L., Radović, M., & Green, M. J. (2019) · npj 2D Materials and Applications · doi:10.1038/s41699-019-0089-3 · Cited by 629
Ultrathin MXene‐Micropattern‐Based Field‐Effect Transistor for Probing Neural Activity
Xu, B., Zhu, M., Zhang, W., Zhen, X., Pei, Z., Xue, Q., Zhi, C., & Shi, P. (2016) · Advanced Materials · doi:10.1002/adma.201504657 · Cited by 593
Ge, G., Zhang, Y., Shao, J., Wang, W., Si, W., Huang, W., & Dong, X. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201802576 · Cited by 579
Self-citationWater-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2016.281 · Cited by 577
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
2D titanium carbide (MXene) for wireless communication
Sarycheva, A., Polemi, A., Liu, Y., Dandekar, K., Anasori, B., & Gogotsi, Y. (2018) · Science Advances · doi:10.1126/sciadv.aau0920 · Cited by 542
All-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Kelly, A. G., Hallam, T., Backes, C., Harvey, A., Esmaeily, A. S., Godwin, I., Coelho, J., Nicolosi, V., Lauth, J., Kulkarni, A., et al. (2017) · Science · doi:10.1126/science.aal4062 · Cited by 501
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
Self-citation3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Haraguchi, K., Farnworth, R., Ohbayashi, A., & Takehisa, T. (2003) · Macromolecules · doi:10.1021/ma034366i · Cited by 488
Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
Yu, L., Fan, Z., Shao, Y., Tian, Z., Sun, J., & Liu, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901839 · Cited by 487
MXene‐on‐Paper Coplanar Microsupercapacitors
Kurra, N., Ahmed, B., Gogotsi, Y., & Alshareef, H. N. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601372 · Cited by 480
Self-citationConductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
Size-Dependent Physical and Electrochemical Properties of Two-Dimensional MXene Flakes
Maleski, K., Ren, C. E., Zhao, M.-Q., Anasori, B., & Gogotsi, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04662 · Cited by 461
3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
Yang, W., Yang, J., Byun, J. J., Moissinac, F. P., Xu, J., Haigh, S. J., Domingos, M., Bissett, M. A., Dryfe, R. A. W., & Barg, S. (2019) · Advanced Materials · doi:10.1002/adma.201902725 · Cited by 460
Shi, X., Wang, H., Xie, X., Xue, Q., Zhang, J., Kang, S., Wang, C., Liang, J., & Chen, Y. (2019) · ACS Nano · doi:10.1021/acsnano.8b07805 · Cited by 453
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
A MXene‐Based Wearable Biosensor System for High‐Performance In Vitro Perspiration Analysis
Lei, Y., Zhao, W., Zhang, Y., Jiang, Q., He, J., Baeumner, A. J., Wolfbeis, O. S., Wang, Z. L., Salama, K. N., & Alshareef, H. N. (2019) · Small · doi:10.1002/smll.201901190 · Cited by 441
Self-citationCarey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
Highly Broadband Absorber Using Plasmonic Titanium Carbide (MXene)
Chaudhuri, K., Alhabeb, M., Wang, Z., Shalaev, V. M., Gogotsi, Y., & Boltasseva, A. (2018) · ACS Photonics · doi:10.1021/acsphotonics.7b01439 · Cited by 428
Zhao, D., Zhao, R., Dong, S., Miao, X., Zhang, Z., Wang, C., & Yin, L. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00308h · Cited by 418
All‐Printed Flexible and Stretchable Electronics
Mohammed, M. G., & Kramer, R. (2017) · Advanced Materials · doi:10.1002/adma.201604965 · Cited by 410
Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics
Hu, G., Albrow-Owen, T., Jin, X., Ali, A., Hu, Y., Howe, R. C. T., Shehzad, K., Yang, Z., Zhu, X., Woodward, R. I., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00358-1 · Cited by 400
Natu, V., Hart, J. L., Sokol, M., Chiang, H., Taheri, M. L., & Barsoum, M. W. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201906138 · Cited by 379
MXetronics: Electronic and photonic applications of MXenes
Kim, H., Wang, Z., & Alshareef, H. N. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.03.020 · Cited by 372
Self-citationJiao, S., Zhou, A., Wu, M., & Hu, H. (2019) · Advanced Science · doi:10.1002/advs.201900529 · Cited by 366
High capacity silicon anodes enabled by MXene viscous aqueous ink
Zhang, C., Park, S.-H., Seral‐Ascaso, A., Barwich, S., McEvoy, N., Boland, C. S., Coleman, J. N., Gogotsi, Y., & Nicolosi, V. (2019) · Nature Communications · doi:10.1038/s41467-019-08383-y · Cited by 365
Excellent oxidation resistive MXene aqueous ink for micro-supercapacitor application
Wu, C.-W., Unnikrishnan, B., Chen, I.-W. P., Harroun, S. G., Chang, H.-T., & Huang, C.-C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.026 · Cited by 364
Transfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
Leaf-inspired multiresponsive MXene-based actuator for programmable smart devices
Cai, G., Ciou, J.-H., Liu, Y., Jiang, Y., & Lee, P. S. (2019) · Science Advances · doi:10.1126/sciadv.aaw7956 · Cited by 341
Fluorine‐Free Synthesis of High‐Purity Ti3C2Tx (T=OH, O) via Alkali Treatment
Li, T., Yao, L., Liu, Q., Gu, J., Luo, R., Li, J., Yan, X., Wang, W., Liu, P., Chen, B., et al. (2018) · Angewandte Chemie · doi:10.1002/ange.201800887 · Cited by 338
Ge, G., Cai, Y., Dong, Q., Zhang, Y., Shao, J., Huang, W., & Dong, X. (2018) · Nanoscale · doi:10.1039/c8nr02813c · Cited by 332
Self-citationRoll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.04.020 · Cited by 312
Tunable Multipolar Surface Plasmons in 2D Ti3C2Tx MXene Flakes
El-Demellawi, J. K., Lopatin, S., Yin, J., Mohammed, O. F., & Alshareef, H. N. (2018) · ACS Nano · doi:10.1021/acsnano.8b04029 · Cited by 309
Self-citationMXenes for Plasmonic Photodetection
Velusamy, D. B., El‐Demellawi, J. K., El‐Zohry, A. M., Giugni, A., Lopatin, S., Hedhili, M. N., Mansour, A. E., Fabrizio, E. D., Mohammed, O. F., & Alshareef, H. N. (2019) · Advanced Materials · doi:10.1002/adma.201807658 · Cited by 287
Self-citationPredicted Surface Composition and Thermodynamic Stability of MXenes in Solution
Ashton, M., Mathew, K., Hennig, R. G., & Sinnott, S. B. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11887 · Cited by 279
Zhang, Y., Cheng, T., Wang, Y., Lai, W., Pang, H., & Huang, W. (2016) · Advanced Materials · doi:10.1002/adma.201600319 · Cited by 269
Self-citationLi, H., & Liang, J. (2020) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 263
Li, H., Li, X., Liang, J., & Chen, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803987 · Cited by 256
Umrao, S., Tabassian, R., Kim, J., Nguyen, V. H., Zhou, Q., Nam, S., & Oh, I.-K. (2019) · Science Robotics · doi:10.1126/scirobotics.aaw7797 · Cited by 251
Additive Manufacturing as a Method to Design and Optimize Bioinspired Structures
Velasco‐Hogan, A., Xu, J., & Meyers, M. A. (2018) · Advanced Materials · doi:10.1002/adma.201800940 · Cited by 247
Oxide Thin‐Film Electronics using All‐MXene Electrical Contacts
Wang, Z., Kim, H., & Alshareef, H. N. (2018) · Advanced Materials · doi:10.1002/adma.201706656 · Cited by 237
Self-citationSolution-Based Processing of Monodisperse Two-Dimensional Nanomaterials
Kang, J., Sangwan, V. K., Wood, J. D., & Hersam, M. C. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00643 · Cited by 229
Controlling the actuation properties of MXene paper electrodes upon cation intercalation
Come, J., Black, J. M., Lukatskaya, M. R., Naguib, M., Beidaghi, M., Rondinone, A. J., Kalinin, S. V., Wesolowski, D. J., Gogotsi, Y., & Balke, N. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.07.028 · Cited by 224
Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices
Garlapati, S. K., Divya, M., Breitung, B., Kruk, R., Hahn, H., & Dasgupta, S. (2018) · Advanced Materials · doi:10.1002/adma.201707600 · Cited by 202
Vural, M., Pena‐Francesch, A., Bars‐Pomes, J., Jung, H., Gudapati, H., Hatter, C. B., Allen, B. D., Anasori, B., Ozbolat, I. T., Gogotsi, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801972 · Cited by 199
Hu, L., Wu, H., & Cui, Y. (2010) · Applied Physics Letters · doi:10.1063/1.3425767 · Cited by 196
Pang, H., Zhang, Y., Lai, W.-Y., Hu, Z., & Huang, W. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.034 · Cited by 188
Self-citationCheng, T., Zhang, Y.-Z., Yi, J.-P., Yang, L., Zhang, J.-D., Lai, W.-Y., & Huang, W. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05319j · Cited by 186
Self-citationChoi, K.-H., Ahn, D. B., & Lee, S.-Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01086 · Cited by 179
Printed Solar Cells and Energy Storage Devices on Paper Substrates
Brunetti, F., Operamolla, A., Castro‐Hermosa, S., Lucarelli, G., Manca, V., Farinola, G. M., & Brown, T. M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806798 · Cited by 171
Controlling the Dimensions of 2D MXenes for Ultrahigh-Rate Pseudocapacitive Energy Storage
Kayali, E., VahidMohammadi, A., Orangi, J., & Beidaghi, M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07397 · Cited by 167
On‐Chip MXene Microsupercapacitors for AC‐Line Filtering Applications
Jiang, Q., Kurra, N., Maleski, K., Lei, Y., Liang, H., Zhang, Y., Gogotsi, Y., & Alshareef, H. N. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901061 · Cited by 162
Self-citationWang, Y., Zhang, Y., Gao, Y., Sheng, G., & ten Elshof, J. E. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.104306 · Cited by 158
Self-citationRecent advances in clay mineral-containing nanocomposite hydrogels
Zhao, L. Z., Zhou, C. H., Wang, J., Tong, D. S., Yu, W. H., & Wang, H. (2015) · Soft Matter · doi:10.1039/c5sm01277e · Cited by 154
High-Resolution Transfer Printing of Graphene Lines for Fully Printed, Flexible Electronics
Song, D., Mahajan, A., Secor, E. B., Hersam, M. C., Francis, L. F., & Frisbie, C. D. (2017) · ACS Nano · doi:10.1021/acsnano.7b03795 · Cited by 145
Partially Reduced Holey Graphene Oxide as High Performance Anode for Sodium‐Ion Batteries
Zhao, J. W., Zhang, Y., Zhang, F., Liang, H., Ming, F., Alshareef, H. N., & Gao, Z. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201803215 · Cited by 126
Self-citation3D printing dendrite-free lithium anodes based on the nucleated MXene arrays
Shen, K. B., Li, B., & Yang, S. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.08.015 · Cited by 124
Li, N., Jiang, Y., Xiao, Y., Meng, B., Xing, C., Zhang, H., & Peng, Z. (2019) · Nanoscale · doi:10.1039/c9nr06751e · Cited by 99
Environmental Stability of MXenes as Energy Storage Materials
Li, X.-L., Huang, Z.-D., & Zhi, C.-Y. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00312 · Cited by 94
Li, G., Kushnir, K., Dong, Y., Chertopalov, S., Rao, A. M., Mochalin, V. N., Podila, R., & Titova, L. V. (2018) · 2D Materials · doi:10.1088/2053-1583/aacb9e · Cited by 92
Laser‐Cutting Fabrication of Mxene‐Based Flexible Micro‐Supercapacitors with High Areal Capacitance
Wang, N., Liu, J., Zhao, Y., Hu, M., Qin, R., & Shan, G. (2019) · ChemNanoMat · doi:10.1002/cnma.201800674 · Cited by 65
Cited by
Advances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216
MXene hydrogels: fundamentals and applications
Zhang, Y.-Z., El-Demellawi, J. K., Jiang, Q., Ge, G., Liang, H., Lee, K., Dong, X., & Alshareef, H. N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00022a · Cited by 743
Self-citationLiu, C., Bai, Y., Li, W., Yang, F., Zhang, G., & Pang, H. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202116282 · Cited by 468
Bai, Y., Liu, C., Chen, T., Li, W., Zheng, S., Pi, Y., Luo, Y., & Pang, H. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202112381 · Cited by 455
Flexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
Metadata
- Authors
- Zhang, Y., Wang, Y., Jiang, Q., El‐Demellawi, J. K., Kim, H., & Alshareef, H. N.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2020-04-02
- Volume
- 32
- Issue
- 21
- Pages
- e1908486-e1908486
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3014911051
- Cited by
- 449
- References
- 110
- FWCI
- 23.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.