The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Advanced Flame‐Retardant Methods for Polymeric Materials
Abstract
Most organic polymeric materials have high flammability, for which the large amounts of smoke, toxic gases, heat, and melt drips produced during their burning cause immeasurable damages to human life and property every year. Despite some desirable results having been achieved by conventional flame‐retardant methods, their application is encountering more and more difficulties with the ever‐increasing high flame‐retardant requirements such as high flame‐retardant efficiency, great persistence, low release of heat, smoke, and toxic gases, and more importantly not deteriorating or even enhancing the overall properties of polymers. Under such condition, some advanced flame‐retardant methods have been developed in the past years based on “all‐in‐one” intumescence, nanotechnology, in situ reinforcement, intrinsic char formation, plasma treatment, biomimetic coatings, etc., which have provided potential solutions to the dilemma of conventional flame‐retardant methods. This review briefly outlines the development, application, and problems of conventional flame‐retardant methods, including bulk‐additive, bulk‐copolymerization, and surface treatment, and focuses on the raise, development, and potential application of advanced flame‐retardant methods. The future development of flame‐retardant methods is further discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Mussel-inspired surface chemistry for multifunctional coatings
Lee, H., Dellatore, S. M., Miller, W. M., & Messersmith, P. B. (2007) · Science · doi:10.1126/science.1147241 · Cited by 10,965
Black phosphorus field-effect transistors
Li, L., Yu, Y., Ye, G. J., Ge, Q., Ou, X., Wu, H., Feng, D., Chen, X. H., & Zhang, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.35 · Cited by 8,413
Cellulose: Fascinating Biopolymer and Sustainable Raw Material
Klemm, D., Heublein, B., Fink, H., & Bohn, A. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200460587 · Cited by 7,551
Phosphorene: An Unexplored 2D Semiconductor with a High Hole Mobility
Liu, H., Neal, A. T., Zhu, Z., Luo, Z., Xu, X., Tománek, D., & Ye, P. D. (2014) · ACS Nano · doi:10.1021/nn501226z · Cited by 6,480
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
Selective binding and removal of guests in a microporous metal–organic framework
Yaghi, O. M., Li, G., & Li, H. (1995) · Nature · doi:10.1038/378703a0 · Cited by 3,081
Sustainable polymers from renewable resources
Zhu, Y., Romain, C., & Williams, C. K. (2016) · Nature · doi:10.1038/nature21001 · Cited by 2,762
New prospects in flame retardant polymer materials: From fundamentals to nanocomposites
Laoutid, F., Bonnaud, L., Alexandre, M., Lopez-Cuesta, J.-M., & Dubois, P. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2008.09.002 · Cited by 1,690
Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites
Gilman, J. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00019-8 · Cited by 1,655
Recent developments in the chemistry of halogen-free flame retardant polymers
Lu, S.-Y., & Hamerton, I. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00018-7 · Cited by 1,581
Gilman, J. W., Jackson, C. L., Morgan, A. B., Harris, R. H. J., Manias, E., Giannelis, E. P., Wuthenow, M., Hilton, D., & Phillips, S. H. (2000) · Chemistry of Materials · doi:10.1021/cm0001760 · Cited by 1,498
Multilayers of colloidal particles
Iler, R. K. (1966) · Journal of Colloid and Interface Science · doi:10.1016/0095-8522(66)90018-3 · Cited by 1,261
POSS related polymer nanocomposites
Kuo, S.-W., & Chang, F.-C. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.05.002 · Cited by 1,035
Nanoparticle networks reduce the flammability of polymer nanocomposites
Kashiwagi, T., Du, F., Douglas, J. F., Winey, K. I., Harris, R. H., & Shields, J. R. (2005) · Nature Materials · doi:10.1038/nmat1502 · Cited by 996
A new multiplet-cluster model for the morphology of random ionomers
Eisenberg, A., Hird, B., & Moore, R. B. (1990) · Macromolecules · doi:10.1021/ma00220a012 · Cited by 953
Preparation of two dimensional layered double hydroxide nanosheets and their applications
Yu, J., Wang, Q., O'Hare, D., & Sun, L. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00318h · Cited by 924
Velencoso, M. M., Battig, A., Markwart, J. C., Schartel, B., & Wurm, F. R. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711735 · Cited by 868
Phosphorus-based Flame Retardancy Mechanisms—Old Hat or a Starting Point for Future Development?
Schartel, B. (2010) · Materials · doi:10.3390/ma3104710 · Cited by 701
Bio-based flame retardants: When nature meets fire protection
Costes, L., Laoutid, F., Brohez, S., & Dubois, P. (2017) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2017.04.001 · Cited by 688
Flame-retardant surface treatments
Lazar, S. T., Kolibaba, T. J., & Grunlan, J. C. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0164-6 · Cited by 643
Morgan, A. B., & Gilman, J. W. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.11884 · Cited by 626
Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites
Kashiwagi, T., Grulke, E., Hilding, J., Groth, K., Harris, R., Butler, K., Shields, J., Kharchenko, S., & Douglas, J. (2004) · Polymer · doi:10.1016/j.polymer.2004.03.088 · Cited by 618
Fire Properties of Polystyrene−Clay Nanocomposites
Zhu, J., Morgan, A. B., Lamelas, F. J., & Wilkie, C. A. (2001) · Chemistry of Materials · doi:10.1021/cm000984r · Cited by 603
Carbon-family materials for flame retardant polymeric materials
Wang, X., Kalali, E. N., Wan, J.-T., & Wang, D.-Y. (2017) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.02.001 · Cited by 569
Intumescent Flame-Retardant and Self-Healing Superhydrophobic Coatings on Cotton Fabric
Chen, S., Li, X., Li, Y., & Sun, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b00121 · Cited by 532
Sain, M. M., Sung Heum, P. A. R. K., Suhara, F., & Law, S. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00280-5 · Cited by 522
Vitruvius: ten books of architecture
(2000) · Choice Reviews Online · doi:10.5860/choice.37-4917 · Cited by 502
Flame Retardant Behavior of Polyelectrolyte−Clay Thin Film Assemblies on Cotton Fabric
Li, Y., Schulz, J., Mannen, S., Delhom, C. D., Condon, B., Chang, S., Zammarano, M., & Grunlan, J. C. (2010) · ACS Nano · doi:10.1021/nn100467e · Cited by 441
Yu, B., Shi, Y., Yuan, B., Qiu, S., Xing, W., Hu, W., Song, L., Lo, S., & Hu, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06613h · Cited by 415
Bao, C., Guo, Y., Song, L., Kan, Y., Qian, X., & Hu, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11434d · Cited by 412
Bao, C., Song, L., Xing, W., Yuan, B., Wilkie, C. A., Huang, J., Guo, Y., & Hu, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm16203b · Cited by 406
Flame retardant coatings prepared using layer by layer assembly: A review
Qiu, X., Li, Z., Li, X., & Zhang, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.09.194 · Cited by 403
Bao, C., Guo, Y., Song, L., & Hu, Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11662b · Cited by 399
Gu, J., Liang, C., Zhao, X., Gan, B., Qiu, H., Guo, Y., Yang, X., Zhang, Q., & Wang, D.-Y. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.12.015 · Cited by 397
Recent developments in flame retardant polymeric coatings
Liang, S., Neisius, N. M., & Gaan, S. (2013) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2013.07.014 · Cited by 392
Wang, X., Hu, Y., Song, L., Yang, H., Xing, W., & Lu, H. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03710a · Cited by 391
Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation
Fina, A., Tabuani, D., Carniato, F., Frache, A., Boccaleri, E., & Camino, G. (2006) · Thermochimica Acta · doi:10.1016/j.tca.2005.10.006 · Cited by 389
Intumescent Multilayer Nanocoating, Made with Renewable Polyelectrolytes, for Flame-Retardant Cotton
Laufer, G., Kirkland, C., Morgan, A. B., & Grunlan, J. C. (2012) · Biomacromolecules · doi:10.1021/bm300873b · Cited by 370
Clay–Chitosan Nanobrick Walls: Completely Renewable Gas Barrier and Flame-Retardant Nanocoatings
Laufer, G., Kirkland, C., Cain, A. A., & Grunlan, J. C. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2017915 · Cited by 367
Novel DOPO-based flame retardants in high-performance carbon fibre epoxy composites for aviation
Perret, B., Schartel, B., Stöß, K., Ciesielski, M., Diederichs, J., Döring, M., Krämer, J., & Altstädt, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.008 · Cited by 360
Wu, J., Chen, L., Fu, T., Zhao, H., Guo, D., Wang, X., & Wang, Y. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.12.047 · Cited by 353
Self-citationDittrich, B., Wartig, K.-A., Hofmann, D., Mülhaupt, R., & Schartel, B. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.04.009 · Cited by 349
Flammability properties of intumescent PLA including starch and lignin
Réti, C., Casetta, M., Duquesne, S., Bourbigot, S., & Delobel, R. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1130 · Cited by 348
Fire retardant action of mineral fillers
Hull, T. R., Witkowski, A., & Hollingbery, L. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.05.006 · Cited by 339
Flame retardancy of thermoplastic polyesters—a review of the recent literature
Levchik, S. V., & Weil, E. D. (2005) · Polymer International · doi:10.1002/pi.1663 · Cited by 332
Flame retardant effects of magnesium hydroxide
Rothon, R. N., & Hornsby, P. R. (1996) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(96)00067-5 · Cited by 325
PA-6 clay nanocomposite hybrid as char forming agent in intumescent formulations
Bourbigot, S., Bras, M. L., Dabrowski, F., Gilman, J. W., & Kashiwagi, T. (2000) · Fire and Materials · doi:10.1002/1099-1018(200007/08)24:4<201::aid-fam739>3.0.co;2-d · Cited by 324
Fire behaviour of polyamide 6/multiwall carbon nanotube nanocomposites
Schartel, B., Pötschke, P., Knoll, U., & Abdel‐Goad, M. A. ‐. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2004.11.023 · Cited by 308
Hapuarachchi, T. D., & Peijs, T. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.03.004 · Cited by 290
Guo, K.-Y., Wu, Q., Mao, M., Chen, H., Zhang, G.-D., Zhao, L., Gao, J.-F., Song, P., & Tang, L.-C. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108017 · Cited by 281
Guo, W., Wang, X., Huang, J., Zhou, Y., Cai, W., Wang, J., Song, L., & Hu, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125661 · Cited by 277
Mao, M., Yu, K.-X., Cao, C.-F., Gong, L.-X., Zhang, G.-D., Zhao, L., Song, P., Gao, J.-F., & Tang, L.-C. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131615 · Cited by 276
Ding, F., Liu, J., Zeng, S., Xia, Y., Wells, K. M., Nieh, M.-P., & Sun, L. (2017) · Science Advances · doi:10.1126/sciadv.1701212 · Cited by 274
Layer-by-layer assembly of silica-based flame retardant thin film on PET fabric
Carosio, F., Laufer, G., Alongi, J., Camino, G., & Grunlan, J. C. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.02.019 · Cited by 257
Wang, X., Song, L., Yang, H., Xing, W., Kandola, B., & Hu, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm35479a · Cited by 255
Brehme, S., Schartel, B., Goebbels, J., Fischer, O., Pospiech, D., Bykov, Y., & Döring, M. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.01.035 · Cited by 254
Ma, H., Tong, L., Xu, Z., & Fang, Z. (2008) · Advanced Functional Materials · doi:10.1002/adfm.200700677 · Cited by 252
Zhao, C., Liu, Y., Wang, D., Wang, D., & Wang, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.04.002 · Cited by 251
Self-citationKalali, E. N., Wang, X., & Wang, D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00010f · Cited by 248
Fire Retardant Halogen−Antimony−Clay Synergism in Polypropylene Layered Silicate Nanocomposites
Zanetti, M., Camino, G., Canavese, D., Morgan, A. B., Lamelas, F. J., & Wilkie, C. A. (2002) · Chemistry of Materials · doi:10.1021/cm011124t · Cited by 247
Cao, M., Liu, B., Zhang, L., Peng, Z., Zhang, Y., Wang, H., Zhao, H., & Wang, Y. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109309 · Cited by 246
Self-citationSome comments on the main fire retardancy mechanisms in polymer nanocomposites
Schartel, B., Bartholmai, M., & Knoll, U. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.792 · Cited by 241
Yu, B., Wang, X., Qian, X., Xing, W., Yang, H., Ma, L., Lin, Y., Jiang, S., Song, L., Hu, Y., et al. (2014) · RSC Advances · doi:10.1039/c3ra45945d · Cited by 238
Nyambo, C., Songtipya, P., Manias, E., Jimenez-Gasco, M. M., & Wilkie, C. A. (2008) · Journal of Materials Chemistry · doi:10.1039/b806531d · Cited by 225
Kinetic analysis of the thermal decomposition of cellulose: The main step of mass loss
Mamleev, V., Bourbigot, S., & Yvon, J. (2007) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2007.01.013 · Cited by 224
Liao, S.-H., Liu, P.-L., Hsiao, M.-C., Teng, C.-C., Wang, C.-A., Ger, M.-D., & Chiang, C.-L. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2026647 · Cited by 215
Bioinspired Catecholic Flame Retardant Nanocoating for Flexible Polyurethane Foams
Cho, J. H., Vasagar, V., Shanmuganathan, K., Jones, A. R., Nazarenko, S., & Ellison, C. J. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b03013 · Cited by 213
A review of flame retardant nanocoatings prepared using layer-by-layer assembly of polyelectrolytes
Holder, K. M., Smith, R. J., & Grunlan, J. C. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1390-1 · Cited by 202
Huang, G., Wang, S., Song, P., Wu, C., Chen, S., & Wang, X. (2013) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.12.010 · Cited by 195
Wang, X., Hu, Y., Song, L., Xuan, S., Xing, W., Bai, Z., & Lu, H. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie1017157 · Cited by 194
LDPE/Mg–Al layered double hydroxide nanocomposite: Thermal and flammability properties
Costa, F. R., Wagenknecht, U., & Heinrich, G. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.07.009 · Cited by 191
Yu, Z.-R., Mao, M., Li, S.-N., Xia, Q.-Q., Cao, C.-F., Zhao, L., Zhang, G.-D., Zheng, Z.-J., Gao, J.-F., & Tang, L.-C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126620 · Cited by 189
Relation between the viscoelastic and flammability properties of polymer nanocomposites
Kashiwagi, T., Mu, M., Winey, K., Cipriano, B., Raghavan, S. R., Pack, S., Rafailovich, M., Yang, Y., Grulke, E., Shields, J., et al. (2008) · Polymer · doi:10.1016/j.polymer.2008.07.054 · Cited by 186
Qian, X., Song, L., Yu, B., Wang, B., Yuan, B., Shi, Y., Hu, Y., & Yuen, R. K. K. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10416h · Cited by 185
Kim, H., Kim, D. W., Vasagar, V., Ha, H., Nazarenko, S., & Ellison, C. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803172 · Cited by 183
Materials engineering for surface-confined flame retardancy
Malucelli, G., Carosio, F., Alongi, J., Fina, A., Frache, A., & Camino, G. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.001 · Cited by 178
Biomacromolecules as novel green flame retardant systems for textiles: an overview
Malucelli, G., Bosco, F., Alongi, J., Carosio, F., Blasio, A. D., Mollea, C., Cuttica, F., & Casale, A. (2014) · RSC Advances · doi:10.1039/c4ra06771a · Cited by 173
Ion-containing polymers: Physical properties and structure
Hornsby, P. R. (1978) · Polymer · doi:10.1016/0032-3861(78)90134-9 · Cited by 172
Layered Double Hydroxide Based Polymer Nanocomposites
Costa, F. R., Saphiannikova, M., Wagenknecht, U., & Heinrich, G. (2007) · Advances in Polymer Science · doi:10.1007/12_2007_123 · Cited by 170
Chen, D.-Q., Wang, Y., Hu, X.-P., Wang, D., Qu, M., & Yang, B. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.11.010 · Cited by 168
Self-citationFlame retardant and hydrophobic coatings on cotton fabrics via sol-gel and self-assembly techniques
Zhang, D., Williams, B. L., Shrestha, S. B., Nasir, Z., Becher, E. M., Lofink, B. J., Santos, V. H., Patel, H., Peng, X., & Sun, L. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.06.087 · Cited by 167
A thermal analysis investigation of partially hydrolyzed starch
Aggarwal, P., & Dollimore, D. (1998) · Thermochimica Acta · doi:10.1016/s0040-6031(98)00355-4 · Cited by 163
Surface functionalization of few-layer black phosphorene and its flame retardancy in epoxy resin
Qu, Z., Wu, K., Jiao, E., Chen, W., Hu, Z., Xu, C., Shi, J., Wang, S., & Tan, Z. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122991 · Cited by 162
Castellano, A., Colleoni, C., Iacono, G., Mezzi, A., Plutino, M. R., Malucelli, G., & Rosace, G. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.02.006 · Cited by 156
Combustion behaviour of EVA/fluorohectorite nanocomposites
Zanetti, M., Camino, G., & Mülhaupt, R. (2001) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(01)00178-1 · Cited by 155
Introducing ecodesign in silica sol–gel materials
Baccile, N., Babonneau, F., Thomas, B., & Coradin, T. (2009) · Journal of Materials Chemistry · doi:10.1039/b911123a · Cited by 155
Progress in Sol-Gel Technology for the Coatings of Fabrics
Periyasamy, A. P., Venkataraman, M., Křemenáková, D., Militký, J., & Zhou, Y. (2020) · Materials · doi:10.3390/ma13081838 · Cited by 155
Gavgani, J. N., Adelnia, H., & Gudarzi, M. M. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7698-6 · Cited by 153
Chen, M., Chen, C.-R., Tan, Y. L., Huang, J.-Q., Wang, X., Chen, L., & Wang, Y. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4036753 · Cited by 151
Self-citationPan, Y., Zhan, J., Pan, H., Wang, W., Tang, G., Song, L., & Hu, Y. Z. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b01423 · Cited by 150
Permanent Flame Retardant Finishing of Textiles by Allyl-Functionalized Polyphosphazenes
Mayer‐Gall, T., Knittel, D., Gutmann, J. S., & Opwis, K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02141 · Cited by 147
Shi, Y., Yu, B., Zhou, K., Yuen, R. K. K., Gui, Z., Hu, Y. Z., & Jiang, S. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.03.041 · Cited by 147
Triple shape memory effect in multiple crystalline polyurethanes
Chen, S., Hu, J., Yuen, C., Chan, L., & Zhuo, H. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1523 · Cited by 144
Design and Synthesis of PET‐Based Copolyesters with Flame‐Retardant and Antidripping Performance
Zhao, H., & Wang, Y. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700451 · Cited by 143
Self-citationManzi-Nshuti, C., Songtipya, P., Manias, E., Jiménez-Gasco, M. D. M., Hossenlopp, J. M., & Wilkie, C. A. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.014 · Cited by 140
Graphite oxide, graphene, and metal-loaded graphene for fire safety applications of polystyrene
Bao, C., Song, L., Wilkie, C. A., Yuan, B., Guo, Y., Hu, Y. Z., & Gong, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32500d · Cited by 139
Wang, X., Song, L., Yang, H., Xing, W., Lu, H., & Hu, Y. Z. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15637g · Cited by 129
Metallic phytates as efficient bio-based phosphorous flame retardant additives for poly(lactic acid)
Costes, L., Laoutid, F., Dumazert, L., Lopez‐Cuesta, J., Brohez, S., Delvosalle, C., & Dúbois, P. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.05.014 · Cited by 128
Li, M.-E., Yan, Y.-W., Zhao, H., Jian, R., & Wang, Y. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107797 · Cited by 120
Self-citationFire‐Safe Polyesters Enabled by End‐Group Capturing Chemistry
Liu, B., Chen, L., Guo, D., et al. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900356 · Cited by 117
Self-citationChen, L., Zhao, H., Ni, Y., Fu, T., Wu, W., Wang, X., & Wang, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta04187g · Cited by 117
Self-citationZhang, T., Yan, H., Shen, L. H., Fang, Z., Zhang, X., Wang, J., & Zhang, B. (2014) · RSC Advances · doi:10.1039/c4ra09243k · Cited by 109
Tang, T., Chen, X., Chen, H., et al. (2005) · Chemistry of Materials · doi:10.1021/cm047771c · Cited by 108
Cellulose/phosphorus combinations for sustainable fire retarded polylactide
Costes, L., Laoutid, F., Khelifa, F., Rose, G., Brohez, S., Delvosalle, C., & Dúbois, P. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.11.030 · Cited by 104
Wang, D., Wang, Y., Wang, J., et al. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.08.004 · Cited by 103
Self-citationGashti, M. P., & Almasian, A. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.07.052 · Cited by 101
Phosphorus-based and Intumescent Flame Retardants
Hörold, S. (2014) · Elsevier eBooks · doi:10.1016/b978-0-444-53808-6.00006-8 · Cited by 99
Alongi, J., Carosio, F., Frache, A., & Malucelli, G. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.08.086 · Cited by 99
Fox, D. M., Lee, J., Citro, C. J., & Novy, M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.11.016 · Cited by 97
Qu, Z., Wu, K., Meng, W., Nan, B., Hu, Z., Xu, C., Tan, Z., Zhang, Q., Meng, H., & Shi, J. Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125416 · Cited by 95
He, F.-M., Liu, B., Chen, L., et al. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106423 · Cited by 93
Self-citationXu, L., Wang, W., & Yu, D. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.05.054 · Cited by 91
Wen, X., Gong, J., Yu, H., Liu, Z., Wan, D., Liu, J., Jiang, Z., & Tang, T. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33689h · Cited by 89
Ranganathan, T., Zilberman, J., Farris, R. J., Coughlin, E. B., & Emrick, T. S. (2006) · Macromolecules · doi:10.1021/ma0614693 · Cited by 87
Dittrich, B., Wartig, K., Hofmann, D., Mülhaupt, R., & Schartel, B. (2014) · Polymer Composites · doi:10.1002/pc.23027 · Cited by 87
Study of the decomposition of kraft lignin impregnated with orthophosphoric acid
Fierro, V., Torné-Fernández, V., Montané, D., & Celzard, A. (2005) · Thermochimica Acta · doi:10.1016/j.tca.2005.02.026 · Cited by 84
Dong, X., Chen, L., Duan, R.-T., & Wang, Y. (2016) · Polymer Chemistry · doi:10.1039/c6py00183a · Cited by 83
Self-citationWei, Y.-X., Deng, C., Chen, H., Wan, L., Wei, W., & Wang, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07629 · Cited by 83
Self-citationCain, A. A., Plummer, M. G., Murray, S. E., Bolling, L., Regev, O., & Grunlan, J. C. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta03541k · Cited by 82
Zhao, B., Hu, Z., Chen, L., Liu, Y., Liu, Y., & Wang, Y. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.32860 · Cited by 80
Self-citationZhang, R., Xiao, X., Tai, Q., Huang, H., Yang, J., & Hu, Y. Z. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38095 · Cited by 80
Flame retardant mechanism of organo-bentonite in polypropylene
Du, B., Guo, Z., Song, P., Liu, H., Fang, Z., & Wu, Y. S. (2009) · Applied Clay Science · doi:10.1016/j.clay.2009.05.003 · Cited by 78
Li, K.-Y., Kuan, C., Kuan, H., Chen, C., Shen, M., Yang, J., & Chiang, C. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.03.037 · Cited by 77
Hu, W., Zhan, J., Wang, X., Hong, N., Wang, B., Song, L., Stec, A. A., Hull, T. R., Wang, J., & Hu, Y. Z. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4026743 · Cited by 75
Lam, Y.-L., Kan, C. W., & Yuen, C.-W. M. (2012) · Textile Progress · doi:10.1080/00405167.2012.735517 · Cited by 74
Shi, X., Yang, P., Peng, X., Huang, C., Qian, Q., Wang, B., He, J., Liu, X., Li, Y., & Kuang, T. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.008 · Cited by 70
Basic magnesium carbonate flame retardants for polypropylene
Rigolo, M., & Woodhams, R. T. (1992) · Polymer Engineering and Science · doi:10.1002/pen.760320505 · Cited by 68
Apaydin, K., Laachachi, A., Ball, V., Jimenez, M., Bourbigot, S., & Ruch, D. (2015) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.12.021 · Cited by 64
Morgan, A. B., Cogen, J. M., Opperman, R. S., & Harris, J. D. (2007) · Fire and Materials · doi:10.1002/fam.950 · Cited by 62
Decomposition and combustion of EVA and LDPE alone and when fire retarded with ATH
McGarry, K., Zilberman, J., Hull, T. R., et al. (2000) · Polymer International · doi:10.1002/1097-0126(200010)49:10<1158::aid-pi505>3.0.co;2-g · Cited by 61
DNA as a flame retardant additive for low-density polyethylene
Isarov, S. A., Lee, P. W., Towslee, J. H., Hoffman, K. M., Davis, R. D., Maia, J. M., & Pokorski, J. K. (2016) · Polymer · doi:10.1016/j.polymer.2016.05.060 · Cited by 60
Horrocks, A. R. (2020) · Polymers · doi:10.3390/polym12092160 · Cited by 58
New UV-curable cyclotriphosphazenes as fire-retardant coating materials for wood
Chen-Yang, Y. W., Chuang, J. R., Yang, Y.-A., Li, C. Y., & Chiu, Y. S. (1998) · Journal of Applied Polymer Science · Cited by 57
Yu, H., Jiang, Z., Gilman, J. W., et al. (2009) · Polymer · doi:10.1016/j.polymer.2009.10.068 · Cited by 56
Fu, T., Guo, D., Chen, L., Wu, W., Wang, X., & Wang, Y. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122040 · Cited by 53
Self-citationSynergistic effect of fumed silica with Ni2O3 on improving flame retardancy of poly(lactic acid)
Gong, J., Tian, N., Wen, X., Chen, X., Liu, J., Jiang, Z., Mijowska, E., & Tang, T. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.030 · Cited by 47
Vahabi, H., Shabanian, M., Aryanasab, F., Laoutid, F., Benali, S., Saeb, M. R., Seidi, F., & Kandola, B. K. (2018) · Fire and Materials · doi:10.1002/fam.2513 · Cited by 46
Kolibaba, T. J., & Grunlan, J. C. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900179 · Cited by 42
Jian, R., Chen, L., Zhao, B., Yan, Y.-W., Li, X.-F., & Wang, Y. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie403726m · Cited by 39
Self-citationCarosio, F., & Fina, A. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00020 · Cited by 38
Halogen-free, low flammability polyurethanes derived from deoxybenzoin-based monomers
Ranganathan, T., Cossette, P., & Emrick, T. S. (2010) · Journal of Materials Chemistry · doi:10.1039/b924034a · Cited by 29
Preparation of a Novel Flame Retardant Formulation for Cotton Fabric
Nguyen, H. K., Sakai, W., & Nguyen, C. (2019) · Materials · doi:10.3390/ma13010054 · Cited by 27
Liu, B., Lei, Y., Liu, X., et al. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109109 · Cited by 25
Self-citationLiu, B., Lei, Y., Liu, X., et al. (2021) · Polymer · doi:10.1016/j.polymer.2021.123430 · Cited by 24
Self-citationDing, H., & Liu, D. (2019) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2019.1695270 · Cited by 3
Cited by
Wen, Y., Chen, C., Ye, Y., Xue, Z., Liu, H., Zhou, X., Zhang, Y., Li, D., Xie, X., & Mai, Y. (2022) · Advanced Materials · doi:10.1002/adma.202201023 · Cited by 367
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Bioinspired polydopamine hydrogels: Strategies and applications
Xu, Y., Hu, J., Hu, J., Cheng, Y., Chen, X., Gu, Z., & Li, Y. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101740 · Cited by 285
Smart fire-warning materials and sensors: Design principle, performances, and applications
Lv, L.-Y., Cao, C.-F., Qu, Y.-X., Zhang, G.-D., Zhao, L., Cao, K., Song, P., & Tang, L.-C. (2022) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2022.100690 · Cited by 266
Controllable micro cross-linking towards multifunctional flame-retardant aliphatic polyamide
Zhang, Q., Zhu, G.-R., Xiao, X.-X., Liu, Q.-S., Jiang, M., Guo, D.-M., Zhao, H.-B., Li, W.-D., Chen, L., Liu, B.-W., et al. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.144983 · Cited by 37
Self-citation
Metadata
- Authors
- Liu, B., Zhao, H., & Wang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-02-27
- Volume
- 34
- Issue
- 46
- Pages
- e2107905-e2107905
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W3216657429
- Cited by
- 887
- References
- 148
- FWCI
- 41.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.