The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Abstract
It has long been a global imperative to develop high‐energy‐density lithium‐ion batteries (LIBs) to meet the ever‐growing electric vehicle market. One of the most effective strategies for boosting the energy density of LIBs is to increase the output voltage, which largely depends upon the cathode materials. As the most‐promising cathodes for high‐voltage LIBs (>4 V vs Li/Li+), four major categories of cathodes including lithium‐rich layered oxides, nickel‐rich layered oxides, spinel oxides, and high‐voltage polyanionic compounds still encounter severe challenges to realize the improvement of output voltage while maintaining high capacity, fast rate capability, and long service life. This review focuses on the key links in the development of high‐voltage cathode materials from the lab to industrialization. First, the failure mechanisms of the four kinds of materials are clarified, and the optimization strategies, particularly solutions that are easy for large‐scale production, are considered. Then, to bridge the gap between lab and industry, the cost management, safety assessment, practical battery‐performance evaluation, and sustainability of the battery technologies, are discussed. Finally, tough challenges and promising strategies for the commercialization of high‐voltage cathode materials are summarized to promote the large‐scale application of LIBs with high energy densities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Pathways for practical high-energy long-cycling lithium metal batteries
Liu, J., Bao, Z., Cui, Y., Dufek, E. J., Goodenough, J. B., Khalifah, P., Li, Q., Liaw, B. Y., Liu, P., Manthiram, A., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0338-x · Cited by 3,412
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
High-nickel layered oxide cathodes for lithium-based automotive batteries
Li, W., Erickson, E. M., & Manthiram, A. (2020) · Nature Energy · doi:10.1038/s41560-019-0513-0 · Cited by 1,754
Materials for lithium-ion battery safety
Liu, K., Liu, Y., Lin, D., Pei, A., & Cui, Y. (2018) · Science Advances · doi:10.1126/sciadv.aas9820 · Cited by 1,625
Seo, D.-H., Lee, J., Urban, A., Malik, R., Kang, S., & Ceder, G. (2016) · Nature Chemistry · doi:10.1038/nchem.2524 · Cited by 1,561
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Jung, R., Metzger, M., Maglia, F., Stinner, C., & Gasteiger, H. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021707jes · Cited by 1,350
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Stable cycling of high-voltage lithium metal batteries in ether electrolytes
Jiao, S., Ren, X., Cao, R., Engelhard, M. H., Liu, Y., Hu, D., Mei, D., Zheng, J., Zhao, W., Li, Q., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0199-8 · Cited by 1,149
Toward sustainable and systematic recycling of spent rechargeable batteries
Zhang, X., Li, L., Fan, E., Xue, Q., Bian, Y., Wu, F., & Chen, R. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00297e · Cited by 1,038
Electrode–Electrolyte Interface in Li-Ion Batteries: Current Understanding and New Insights
Gauthier, M., Carney, T. J., Grimaud, A., Giordano, L., Pour, N., Chang, H.-H., Fenning, D. P., Lux, S. F., Paschos, O., Bauer, C., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01727 · Cited by 1,028
Yan, P., Zheng, J., Gu, M., Xiao, J., Zhang, J.-G., & Wang, C.-M. (2017) · Nature Communications · doi:10.1038/ncomms14101 · Cited by 1,010
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Xu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
Anionic redox processes for electrochemical devices
Grimaud, A., Hong, W. T., Shao-Horn, Y., & Tarascon, J.-M. (2016) · Nature Materials · doi:10.1038/nmat4551 · Cited by 822
Recent progress in high-voltage lithium ion batteries
Hu, M., Pang, X., & Zhou, Z. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.024 · Cited by 776
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Xue, W., Huang, M., Li, Y., Zhu, Y. G., Gao, R., Xiao, X., Zhang, W., Li, S., Xu, G., Yu, Y., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00792-y · Cited by 673
A review of the state of health for lithium-ion batteries: Research status and suggestions
Tian, H., Qin, P., Li, K., & Zhao, Z. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120813 · Cited by 651
Pieczonka, N. P. W., Liu, Z., Lu, P., Olson, K. L., Moote, J., Powell, B. R., & Kim, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp405158m · Cited by 629
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
A review of safety strategies of a Li-ion battery
Chombo, P. V., & Laoonual, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228649 · Cited by 596
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Diagnosing and correcting anode-free cell failure via electrolyte and morphological analysis
Louli, A. J., Eldesoky, A., Weber, R., Genovese, M., Coon, M., deGooyer, J., Deng, Z., White, R. T., Lee, J., Rodgers, T., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0668-8 · Cited by 570
Aurbach, D., Gamolsky, K., Markovsky, B., Salitra, G., Gofer, Y., Heider, U., Oesten, R., & Schmidt, M. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393357 · Cited by 553
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Self-citationResearch progress in high voltage spinel LiNi0.5Mn1.5O4 material
Santhanam, R., & Rambabu, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.03.067 · Cited by 540
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Park, K., Jung, H., Kuo, L., Kaghazchi, P., Yoon, C. S., & Sun, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801202 · Cited by 502
Battery cost forecasting: a review of methods and results with an outlook to 2050
Mauler, L., Duffner, F., Zeier, W. G., & Leker, J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01530c · Cited by 499
Wandt, J., Freiberg, A. T. S., Ogrodnik, A., & Gasteiger, H. A. (2018) · Materials Today · doi:10.1016/j.mattod.2018.03.037 · Cited by 496
Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300269 · Cited by 495
Li, W., Dolocan, A., Oh, P., Celio, H., Park, S., Cho, J., & Manthiram, A. (2017) · Nature Communications · doi:10.1038/ncomms14589 · Cited by 466
A Review of the Design of Advanced Binders for High‐Performance Batteries
Zou, F., & Manthiram, A. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002508 · Cited by 465
Transition metal-doped Ni-rich layered cathode materials for durable Li-ion batteries
Sun, H. H., Kim, U.-H., Park, J.-H., Park, S.-W., Seo, D.-H., Heller, A., Mullins, C. B., Yoon, C. S., & Sun, Y.-K. (2021) · Nature Communications · doi:10.1038/s41467-021-26815-6 · Cited by 457
Zhang, Y., Katayama, Y., Tatara, R., Giordano, L., Yu, Y., Fraggedakis, D., Sun, J. G., Maglia, F., Jung, R., Bazant, M. Z., et al. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02543j · Cited by 452
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Dong, K., Dong, X., & Jiang, Q. (2020) · The World Economy · doi:10.1111/twec.12898 · Cited by 436
Phase Behavior during Electrochemical Cycling of Ni‐Rich Cathode Materials for Li‐Ion Batteries
Xu, C., Reeves, P. J., Jacquet, Q., & Grey, C. P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003404 · Cited by 429
Practical Evaluation of Li-Ion Batteries
Li, H. (2019) · Joule · doi:10.1016/j.joule.2019.03.028 · Cited by 420
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Ultrasonic Scanning to Observe Wetting and “Unwetting” in Li-Ion Pouch Cells
Deng, Z., Huang, Z., Shen, Y., Huang, Y., Ding, H., Luscombe, A., Johnson, M., Harlow, J. E., Gauthier, R., & Dahn, J. R. (2020) · Joule · doi:10.1016/j.joule.2020.07.014 · Cited by 383
Self-citationAn overview of global power lithium-ion batteries and associated critical metal recycling
Miao, Y., Liu, L., Zhang, Y., Tan, Q., & Li, J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.127900 · Cited by 379
Ma, J., Hu, P., Cui, G., & Chen, L. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00948 · Cited by 352
Wang, Y., Zhang, Q., Xue, Z., Yang, L., Wang, J., Meng, F., Li, Q., Pan, H., Zhang, J., Jiang, Z., et al. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001413 · Cited by 342
Mao, Y., Wang, X., Xia, S., Zhang, K., Wei, C., Bak, S., Shadike, Z., Liu, X., Yang, Y., Xu, R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900247 · Cited by 339
Self-citationOxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Hydrolysis of LiPF6-Containing Electrolyte at High Voltage
Liu, M., Vatamanu, J., Chen, X., Xing, L., Xu, K., & Li, W. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00707 · Cited by 334
Alkali-Metal Anodes: From Lab to Market
Xiang, J., Yang, L., Yuan, L., Yuan, K., Zhang, Y., Huang, Y., Lin, J., Pan, F., & Huang, Y. (2019) · Joule · doi:10.1016/j.joule.2019.07.027 · Cited by 333
Self-citationEstimation of Battery State of Health Using Probabilistic Neural Network
Lin, H.-T., Liang, T.-J., & Chen, S.-M. (2013) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2012.2222650 · Cited by 327
Aligning academia and industry for unified battery performance metrics
Lin, Z., Liu, T., Ai, X., & Liang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-07599-8 · Cited by 325
Gas generation mechanism due to electrolyte decomposition in commercial lithium-ion cell
Kumai, K., Miyashiro, H., Kobayashi, Y., Takei, K., & Ishikawa, R. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00234-1 · Cited by 317
Recycling of spent lithium-ion batteries in view of green chemistry
Li, Y., Lv, W., Huang, H., Yan, W., Li, X., Ning, P., Cao, H., & Sun, Z. (2021) · Green Chemistry · doi:10.1039/d1gc01639c · Cited by 300
Comparison of Several Methods for Determining the Internal Resistance of Lithium Ion Cells
Schweiger, H.-G., Obeidi, O., Komesker, O., Raschke, A., Schiemann, M., Zehner, C., Gehnen, M., Keller, M., & Birke, P. (2010) · Sensors · doi:10.3390/s100605604 · Cited by 297
Practical assessment of the performance of aluminium battery technologies
Faegh, E., Ng, B., Hayman, D., & Mustain, W. E. (2020) · Nature Energy · doi:10.1038/s41560-020-00728-y · Cited by 290
Moshkovich, M., Cojocaru, M., Gottlieb, H. E., & Aurbach, D. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(00)00457-5 · Cited by 271
Deng, T., Fan, X., Cao, L., Chen, J., Hou, S., Ji, X., Chen, L., Li, S., Zhou, X., Hu, E., et al. (2019) · Joule · doi:10.1016/j.joule.2019.08.004 · Cited by 266
Pieczonka, N. P. W., Borgel, V., Ziv, B., Leifer, N., Dargel, V., Aurbach, D., Kim, J., Liu, Z., Huang, X., Krachkovskiy, S. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501008 · Cited by 262
Chen, L., Fan, X., Hu, E., Ji, X., Chen, J., Hou, S., Deng, T., Li, J., Su, D., Yang, X., et al. (2019) · Chem · doi:10.1016/j.chempr.2019.02.003 · Cited by 227
Joshi, T., Eom, K., Yushin, G., & Fuller, T. F. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0861412jes · Cited by 224
Zhou, K. L., Xie, Q., Li, B., & Manthiram, A. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.09.015 · Cited by 210
Liang, G., Wu, Z., Didier, C., Zhang, W., Cuan, J., Li, B., Ko, K., Hung, P., Lu, C., Chen, Y., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202001454 · Cited by 202
Bryantsev, V. S., & Blanco, M. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1016526 · Cited by 200
Li, W., Kim, U.-H., Dolocan, A., Sun, Y.-K., & Manthiram, A. (2017) · ACS Nano · doi:10.1021/acsnano.7b01494 · Cited by 197
Dextran Sulfate Lithium as Versatile Binder to Stabilize High‐Voltage LiCoO2 to 4.6 V
Huang, H., Li, Z., Gu, S., Bian, J., Li, Y., Chen, J., Liao, K., Gan, Q., Wang, Y., Wu, S., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101864 · Cited by 186
Zhao, J., Zhang, X., Liang, Y., Han, Z., Liu, S., Chu, W., & Yu, H. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00750 · Cited by 180
In Situ Construction of Uniform and Robust Cathode–Electrolyte Interphase for Li‐Rich Layered Oxides
Zhao, J., Liang, Y., Zhang, X., Zhang, Z., Wang, E., He, S., Wang, B., Han, Z., Lu, J., Amine, K., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202009192 · Cited by 175
Ma, Y., Chen, K., Ma, J., Xu, G. J., Dong, S., Chen, B., Li, J., Chen, Z., Zhou, X., & Cui, G. (2018) · Energy & Environmental Science · doi:10.1039/c8ee02555j · Cited by 151
High‐Voltage Electrolyte Chemistry for Lithium Batteries
Guo, K., Qi, S., Wang, H., Huang, J., Wu, M., Yang, Y., Li, X., Ren, Y., & Ma, J. (2022) · Small Science · doi:10.1002/smsc.202100107 · Cited by 143
Self-citationEliminating the Detrimental Effects of Conductive Agents in Sulfide-Based Solid-State Batteries
Deng, S., Sun, Y., Li, X., Ren, Z., Liang, J., Doyle‐Davis, K., Liang, J., Li, W., Banis, M. N., Sun, Q., et al. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00256 · Cited by 142
Tebbe, J. L., Fuerst, T. F., & Musgrave, C. B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b06157 · Cited by 128
Campbell, G. A. (2019) · Mineral Economics · doi:10.1007/s13563-019-00173-8 · Cited by 107
Evolution and expansion of Li concentration gradient during charge–discharge cycling
Chae, B.-G., Park, S. Y., Song, J. H., Lee, E., & Jeon, W. S. (2021) · Nature Communications · doi:10.1038/s41467-021-24120-w · Cited by 95
Xue, Q., Li, J., Xu, G., Zhou, H., Wang, X., & Kang, F. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04024d · Cited by 88
Recent progress of asymmetric solid-state electrolytes for lithium/sodium-metal batteries
Jiang, B., Wei, Y. J., Wu, J., Hang, C. W., Yuan, L., Li, Z., Xu, H., & Huang, Y. (2021) · EnergyChem · doi:10.1016/j.enchem.2021.100058 · Cited by 84
Self-citationChu, C.-T., Mondal, A., Kosova, N. V., & Lin, J. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147169 · Cited by 82
Kasnatscheew, J., Evertz, M., Streipert, B., Wagner, R., Nowak, S., Cekić-Lasković, I., & Winter, M. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.05.092 · Cited by 76
Mukherjee, P., Faenza, N. V., Pereira, N., Ciston, J., Piper, L. F. J., Amatucci, G. G., & Cosandey, F. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b05305 · Cited by 70
Qi, X., Blizanac, B. B., Pasquier, A. D., Lal, A., Niehoff, P., Placke, T., Oljaca, M., Li, J., & Winter, M. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0401503jes · Cited by 57
Fang, X., Lin, F., Nordlund, D. L., Mecklenburg, M. H., Ge, M., Rong, J., Zhang, A., Shen, C., Liu, Y., Cao, Y. K., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201602873 · Cited by 48
Xiong, D. J., Ellis, L. D., Li, J., Li, H., Hynes, T., Allen, J. P., Xia, J., Hall, D. S., Hill, I. G., & Dahn, J. R. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0291713jes · Cited by 46
The Functions and Applications of Fluorinated Interface Engineering in Li‐Based Secondary Batteries
Qi, M., Xu, Y., Guo, S., Zhang, S., Li, J., Sun, Y., Jiang, K., Cao, A., & Wan, L. (2021) · Small Science · doi:10.1002/smsc.202100066 · Cited by 43
Ivanishchev, A. V., Gridina, N. A., Сергеевич, Р. К., Ivanishchev, A. V., & Dixit, A. (2020) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2020.113894 · Cited by 30
Functionalization of the carbon additive of a high-voltage Li-ion cathode
Saneifar, H., Delaporte, N. D., Zaghib, K., & Bélanger, D. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta07236a · Cited by 27
Degradation Diagnostics from the Subsurface of Lithium‐Ion Battery Electrodes
Yao, X., Šamořil, T., Dluhoš, J., Watts, J. F., Du, Z., Song, B., Silva, S. R. P., Sui, T., & Zhao, Y. (2021) · Energy & environment materials · doi:10.1002/eem2.12221 · Cited by 20
Cited by
Strategies toward the development of high-energy-density lithium batteries
Niu, H., Zhang, N., Lu, Y., Zhang, Z., Li, M., Liu, J., Zhang, N., Song, W., Zhao, Y., & Miao, Z. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111666 · Cited by 327
Metadata
- Authors
- Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-08-05
- Volume
- 34
- Issue
- 52
- Pages
- e2200912-e2200912
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4220757481
- Cited by
- 394
- References
- 94
- FWCI
- 22.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.