The DOI matches its Crossref record; 68 of the 68 references it cites were found in a registry or an index.
Osteoimmunity‐Regulating Biomimetically Hierarchical Scaffold for Augmented Bone Regeneration
Abstract
Engineering a proper immune response following biomaterial implantation is essential to bone tissue regeneration. Herein, a biomimetically hierarchical scaffold composed of deferoxamine@poly(ε‐caprolactone) nanoparticles (DFO@PCL NPs), manganese carbonyl (MnCO) nanosheets, gelatin methacryloyl hydrogel, and a polylactide/hydroxyapatite (HA) matrix is fabricated to augment bone repair by facilitating the balance of the immune system and bone metabolism. First, a 3D printed stiff scaffold with a well‐organized gradient structure mimics the cortical and cancellous bone tissues; meanwhile, an inside infusion of a soft hydrogel further endows the scaffold with characteristics of the extracellular matrix. A Fenton‐like reaction between MnCO and endogenous hydrogen peroxide generated at the implant‐tissue site triggers continuous release of carbon monoxide and Mn 2+, thus significantly lessening inflammatory response by upregulating the M2 phenotype of macrophages, which also secretes vascular endothelial growth factor to induce vascular formation. Through activating the hypoxia‐inducible factor‐1α pathway, Mn 2+ and DFO@PCL NP further promote angiogenesis. Moreover, DFO inhibits osteoclast differentiation and synergistically collaborates with the osteoinductive activity of HA. Based on amounts of data in vitro and in vivo, strong immunomodulatory, intensive angiogenic, weak osteoclastogenic, and superior osteogenic abilities of such an osteoimmunity‐regulating scaffold present a profound effect on improving bone regeneration, which puts forward a worthy base and positive enlightenment for large‐scale bone defect repair.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Vascularized 3D printed scaffolds for promoting bone regeneration
Yan, Y., Chen, H., Zhang, H., Guo, C., Yang, K., Chen, K., Cheng, R., Qian, N., Sandler, N., Zhang, Y. S., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2018.10.033 · Cited by 475
Tu, Z., Chen, M., Wang, M., Shao, Z., Jiang, X., Wang, K., Yao, Z., Yang, S., Zhang, X., Gao, W., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100924 · Cited by 422
Zhu, Y., Liang, H., Liu, X., Wu, J., Yang, C., Wong, T. M., Kwan, K. Y. H., Cheung, K. M. C., Wu, S., & Yeung, K. W. K. (2021) · Science Advances · doi:10.1126/sciadv.abf6654 · Cited by 415
3D printing of Haversian bone–mimicking scaffolds for multicellular delivery in bone regeneration
Zhang, M., Lin, R., Wang, X., Xue, J., Deng, C., Feng, C., Zhuang, H., Ma, J., Qin, C., Wan, L., et al. (2020) · Science Advances · doi:10.1126/sciadv.aaz6725 · Cited by 387
Jin, S.-S., He, D.-Q., Luo, D., Wang, Y., Yu, M., Guan, B., Fu, Y., Li, Z.-X., Zhang, T., Zhou, Y.-H., et al. (2019) · ACS Nano · doi:10.1021/acsnano.9b00489 · Cited by 357
Chen, Z., Yan, X., Yin, S., Liu, L., Liu, X., Zhao, G., Ma, W., Qi, W., Ren, Z., Liao, H., et al. (2020) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.110289 · Cited by 324
Engineering vascularized and innervated bone biomaterials for improved skeletal tissue regeneration
Marrella, A., Lee, T. Y., Lee, D. H., Karuthedom, S., Syla, D., Chawla, A., Khademhosseini, A., & Jang, H. L. (2018) · Materials Today · doi:10.1016/j.mattod.2017.10.005 · Cited by 311
Liu, W., Li, J., Cheng, M., Wang, Q., Yeung, K. W. K., Chu, P. K., & Zhang, X. (2018) · Advanced Science · doi:10.1002/advs.201800749 · Cited by 301
Polymer Fiber Scaffolds for Bone and Cartilage Tissue Engineering
Zhang, Y., Liu, X., Zeng, L., Zhang, J., Zuo, J., Zou, J., Ding, J., & Chen, X. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903279 · Cited by 294
Self-citation3D printed scaffolds with gradient porosity based on a cellulose nanocrystal hydrogel
Sultan, S., & Mathew, A. P. (2018) · Nanoscale · doi:10.1039/c7nr08966j · Cited by 285
Zhao, F., Lei, B., Li, X., Mo, Y., Wang, R., Chen, D., & Chen, X. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.06.004 · Cited by 280
Functional Biomaterials for Bone Regeneration: A Lesson in Complex Biology
Armiento, A. R., Hatt, L. P., Sanchez Rosenberg, G., Thompson, K., & Stoddart, M. J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909874 · Cited by 273
Application of hydroxyapatite nanoparticles in tumor-associated bone segmental defect
Zhang, K., Zhou, Y., Xiao, C., Zhao, W., Wu, H., Tang, J., Li, Z., Yu, S., Li, X., Min, L., et al. (2019) · Science Advances · doi:10.1126/sciadv.aax6946 · Cited by 268
A novel high-strength poly(ionic liquid)/PVA hydrogel dressing for antibacterial applications
Fang, H., Wang, J., Li, L., Xu, L., Wu, Y., Wang, Y., Fei, X., Tian, J., & Li, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.030 · Cited by 261
Self-citationWang, X., Fang, J., Zhu, W., Zhong, C., Ye, D., Zhu, M., Lu, X., Zhao, Y., & Ren, F. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010068 · Cited by 251
Hou, Y., Xie, W., Yu, L., Camacho, L. C., Nie, C., Zhang, M., Haag, R., & Wei, Q. (2020) · Small · doi:10.1002/smll.201905422 · Cited by 247
Wu, D., Duan, X., Guan, Q., Liu, J., Yang, X., Zhang, F., Huang, P., Shen, J., Shuai, X., & Cao, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900095 · Cited by 246
Cui, L., Zhang, J., Zou, J., Yang, X., Guo, H., Tian, H., Zhang, P., Wang, Y., Zhang, N., Zhuang, X., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119617 · Cited by 228
Self-citationRen, B., Wan, Y., Liu, C., Wang, H., Yu, M., Zhang, X., & Huang, Y. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2020.111505 · Cited by 201
High‐Performance Nanocomposites Inspired by Nature
Peng, J., & Cheng, Q. (2017) · Advanced Materials · doi:10.1002/adma.201702959 · Cited by 192
Zhu, L., Tang, Y., Li, X.-Y., Keller, E. T., Yang, J., Cho, J.-S., Feinberg, T. Y., & Weiss, S. J. (2020) · Science Translational Medicine · doi:10.1126/scitranslmed.aaw6143 · Cited by 178
Cao, J., Li, J., Chen, Y., Zhang, L., & Zhou, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201800739 · Cited by 178
Immunopolarization-regulated 3D printed-electrospun fibrous scaffolds for bone regeneration
Liu, X., Chen, M., Luo, J., Zhao, H., Zhou, X., Gu, Q., Yang, H., Zhu, X., Cui, W., & Shi, Q. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121037 · Cited by 172
Self-citationChen, Q., Li, J., Han, F., Meng, Q., Wang, H., Wei, Q., Li, Z., Li, F., Xie, E., Qin, X., et al. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202201067 · Cited by 169
Yu, G., Li, Z., Li, S., Zhang, Q., Hua, Y., Liu, H., Zhao, X., Dhaidhai, D. T., Li, W., & Wang, X. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108754 · Cited by 165
Zhang, L., Song, B., Yang, L., & Shi, Y. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.05.038 · Cited by 164
Yang, C., Ma, H., Wang, Z., Younis, M. R., Liu, C., Wu, C., Luo, Y., & Huang, P. (2021) · Advanced Science · doi:10.1002/advs.202100894 · Cited by 163
Yu, Y., Dai, K., Gao, Z., Tang, W., Shen, T., Yuan, Y., Wang, J., & Liu, C. (2021) · Science Advances · doi:10.1126/sciadv.abd8217 · Cited by 162
Self-citationTrabecular bone organoid model for studying the regulation of localized bone remodeling
Park, Y., Cheong, E., Kwak, J., Carpenter, R., Shim, J., & Lee, J. (2021) · Science Advances · doi:10.1126/sciadv.abd6495 · Cited by 160
Bai, J., Wang, H., Chen, H., Ge, G., Wang, M., Gao, A., Tong, L., Xu, Y., Yang, H., Pan, G., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120197 · Cited by 159
Self-citationCui, H., Zhu, W., Holmes, B. B., & Zhang, L. G. (2016) · Advanced Science · doi:10.1002/advs.201600058 · Cited by 155
Engineered probiotics biofilm enhances osseointegration via immunoregulation and anti-infection
Tan, L., Fu, J., Feng, F., Liu, X., Cui, Z., Li, B., Han, Y. N., Zheng, Y., Yeung, K., Li, Z., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba5723 · Cited by 155
Lin, Z., Shen, D., Zhou, W., Zheng, Y., Kong, T., Liu, X., Wu, S., Chu, P. K., Zhao, Y., Wu, J., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.01.018 · Cited by 155
Lotus seedpod-inspired internal vascularized 3D printed scaffold for bone tissue repair
Han, X., Sun, M., Chen, B., Saiding, Q., Zhang, J., Song, H., Deng, L., Wang, P., Gong, W., & Cui, W. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.019 · Cited by 149
Self-citationJin, Z., Wen, Y., Xiong, L., Yang, T., Zhao, P., Tan, L., Wang, T., Qian, Z., Su, B., & He, Q. (2017) · Chemical Communications · doi:10.1039/c7cc01576c · Cited by 147
Chen, W., Sun, Y., Gu, X., Cai, J., Liu, X., Zhang, X., Chen, J., Hao, Y., & Chen, S. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120714 · Cited by 146
Self-citationSalt‐Assisted Toughening of Protein Hydrogel with Controlled Degradation for Bone Regeneration
Jiang, L., Su, D., Ding, S., Zhang, Q., Li, Z., Chen, F., Ding, W., Zhang, S., & Dong, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901314 · Cited by 142
Wu, R., Li, Y., Shen, M., Yang, X., Zhang, L., Ke, X., Yang, G., Gao, C., Gou, Z., & Xu, S. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.11.003 · Cited by 138
Hao, S., Meng, J., Zhang, Y., Liu, J., Nie, X., Wu, F., Yang, Y., Wang, C., Gu, N., & Xu, H. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.06.013 · Cited by 133
Ou, Q., Huang, K., Fu, C., Huang, C., Fang, Y., Gu, Z., Wu, J., & Wang, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123019 · Cited by 124
Zou, M., Sun, J., & Xiang, Z. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202001502 · Cited by 122
Three-Dimensional Printed Polylactic Acid Scaffolds Promote Bone-like Matrix Deposition in Vitro
Fairag, R., Rosenzweig, D. H., Ramírez-GarcíaLuna, J. L., Weber, M. H., & Haglund, L. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b02502 · Cited by 120
Ma, L., Wang, X., Ye, Z., Ji, X., Cheng, S., Bian, D., Zhou, L., Zhou, L., Ning, C., & Zhang, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.03.010 · Cited by 116
Bioactive Pore‐Forming Bone Adhesives Facilitating Cell Ingrowth for Fracture Healing
Xu, L., Gao, S., Zhou, R., Zhou, F., Qiao, Y., & Qiu, D. (2020) · Advanced Materials · doi:10.1002/adma.201907491 · Cited by 108
Cheng, L., Chen, Z., Cai, Z., Zhao, J., Lu, M., Liang, J., Wang, F., Qi, J., Cui, W., & Deng, L. (2020) · Small · doi:10.1002/smll.202005433 · Cited by 108
Zhu, D., Liu, Z., Li, Y., Huang, Q., Xia, L., & Li, K. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120894 · Cited by 108
Lin, Z., Wu, M., He, H., Liang, Q., Hu, C., Zeng, Z., Cheng, D., Wang, G., Chen, D., Pan, H., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808439 · Cited by 101
Jiang, L., Ding, S., Ding, W., Su, D., Zhang, F., Zhang, T., Yin, X., Xiao, L., Li, Y., Yuan, F., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.129323 · Cited by 99
Osteointegration of 3D-Printed Fully Porous Polyetheretherketone Scaffolds with Different Pore Sizes
Feng, X., Ma, L., Liang, H., Liu, X., Lei, J., Li, W., Wang, K., Song, Y., Wang, B., Li, G., et al. (2020) · ACS Omega · doi:10.1021/acsomega.0c03489 · Cited by 93
Alarçın, E., Lee, T. Y., Karuthedom, S., Mohammadi, M., Brennan, M. Á., Lee, D. H., Marrella, A., Zhang, J. C., Syla, D., Zhang, Y. S., et al. (2018) · Biomaterials Science · doi:10.1039/c8bm00293b · Cited by 87
Self-citationMiao, L., Qu, X., Liu, H., Liu, Y., Wang, S., Wu, S., Bentley, W. E., Payne, G. F., & Liu, C. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900065 · Cited by 86
Yang, J., Liang, J., Zhu, Y., Hu, M., Deng, L., Cui, W., & Xu, X. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.024 · Cited by 79
Zhang, J., Hu, W., Ding, C., Yao, G., Zhao, H., & Wu, S. (2019) · Toxicology Letters · doi:10.1016/j.toxlet.2019.06.007 · Cited by 75
Self-citationA self-healing coating containing curcumin for osteoimmunomodulation to ameliorate osseointegration
Li, B., Huang, R., Ye, J., Liu, L., Qin, L., Zhou, J., Zheng, Y., Wu, S., & Han, Y. N. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.126323 · Cited by 74
Chen, W., Nichols, L., Brinkley, F. M., Bohna, K., Tian, W., Priddy, M. W., & Priddy, L. B. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111686 · Cited by 72
Huo, S., Wang, F., Lyu, Z., Hong, Q., Nie, B., Wei, J., Wang, Y., Zhang, J., & Yue, B. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130806 · Cited by 70
Self-citationOptimization of transdermal deferoxamine leads to enhanced efficacy in healing skin wounds
Duscher, D., Trotsyuk, A. A., Maan, Z. N., Kwon, S. H., Rodrigues, M., Engel, K. W., Stern‐Buchbinder, Z. A., Bonham, C. A., Barrera, J. A., Whittam, A. J., et al. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.07.009 · Cited by 66
Song, B., Zhang, C., Hu, W., Guo, C., Xia, Z., Hu, W., Qin, M.-Q., Jiang, W., Lv, J.-W., Xu, D., et al. (2021) · Journal of Controlled Release · doi:10.1016/j.jconrel.2021.01.025 · Cited by 61
Ma, Y., Zhang, C., Wang, Y., Zhang, L., Zhang, J., Shi, J., Si, J., Yuan, Y., & Liu, C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.128541 · Cited by 56
Self-citationQuan, H., He, Y., Sun, J., Yang, W., Luo, W., Dou, C., Kang, F., Zhao, C., He, J., Yang, X., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09879 · Cited by 55
Biomimetic carbon monoxide nanogenerator ameliorates streptozotocin induced type 1 diabetes in mice
Zhang, C., Peng, S., Hong, S., Chen, Q., Zeng, X., Rong, L., Zhong, Z., & Zhang, X. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.119986 · Cited by 45
Robust Hydroxyapatite Coating by Laser‐Induced Hydrothermal Synthesis
Um, S., Chung, Y., Seo, Y., Seo, H., Ok, M., Kim, Y.-C., Han, H., Chung, J. J., Edwards, J., & Jeon, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005233 · Cited by 45
Wang, Z., Niu, Y., Tian, X., Yu, N. H., Yin, X., Xing, Z., Li, Y., Dong, L., & Wang, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202007408 · Cited by 43
Zhang, Y., Li, J., Soleimani, M., Giacomini, F., Friedrich, H., Truckenmüller, R. K., & Habibović, P. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102911 · Cited by 43
Esser, T. U., Roshanbinfar, K., & Engel, F. B. (2018) · Expert Opinion on Biological Therapy · doi:10.1080/14712598.2019.1561855 · Cited by 41
An immunomodulatory bioink with hollow manganese silicate nanospheres for angiogenesis
Wu, J., Chen, Q., Ma, J., Zhang, H., Chang, J., Mao, L., & Wu, C. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101015 · Cited by 37
Liu, H., Wen, W., Chen, S., Zhou, C., & Luo, B. (2018) · ACS Applied Bio Materials · doi:10.1021/acsabm.8b00129 · Cited by 25
Research works printed but not linked: 2
- 10.1016/j.isci.2020.101483 · doi:10.1016/j.isci.2020.101483
- 10.1002/adfm.202105383 · doi:10.1002/adfm.202105383
Cited by
Xu, Y., Luo, Y., Weng, Z., Xu, H., Zhang, W., Li, Q., Liu, H., Liu, L., Wang, Y., Liu, X., et al. (2023) · ACS Nano · doi:10.1021/acsnano.3c01940 · Cited by 393
Recent Advances in 3D Printing of Smart Scaffolds for Bone Tissue Engineering and Regeneration
Yuan, X., Zhu, W., Yang, Z., He, N., Chen, F., Han, X., & Zhou, K. (2024) · Advanced Materials · doi:10.1002/adma.202403641 · Cited by 339
Lv, Z., Hu, T., Bian, Y., Wang, G., Wu, Z., Li, H., Liu, X., Yang, S., Tan, C., Liang, R., et al. (2023) · Advanced Materials · doi:10.1002/adma.202206545 · Cited by 278
Wu, M., Liu, H., Li, D., Zhu, Y., Wu, P., Chen, Z., Chen, F., Chen, Y., Deng, Z., & Cai, L. (2024) · Advanced Science · doi:10.1002/advs.202304641 · Cited by 257
Wu, M., Liu, H., Zhu, Y., Wu, P., Chen, Y., Deng, Z., Zhu, X., & Cai, L. (2024) · Theranostics · doi:10.7150/thno.97335 · Cited by 189
Metadata
- Authors
- Zhang, J., Tong, D., Song, H., Ruan, R., Sun, Y., Lin, Y., Wang, J., Hou, L., Dai, J., Ding, J., & Yang, H.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2022-07-24
- Volume
- 34
- Issue
- 36
- Pages
- e2202044-e2202044
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W4283821125
- Cited by
- 349
- References
- 68
- FWCI
- 21.05
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- National Natural Science Foundation of China (U21A2099, 51903050, 21874024)
- Natural Science Foundation of Fujian Province (2019J01258)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.