The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Bioresorbable nanofiber‐based systems for wound healing and drug delivery: Optimization of fabrication parameters
Abstract
Wound healing is a complex process that often requires treatment with antibiotics. This article reports the initial development of a biodegradable polymeric nanofiber‐based antibiotic delivery system. The functions of such a system would be (a) to serve as a biodegradable gauze, and (b) to serve as an antibiotic delivery system. The polymer used in this study was poly(lactide‐co‐glycolide) (PLAGA), and nanofibers of PLAGA were fabricated with the use of the electrospinning process. The objective of this study was to determine the effect of fabrication parameters: orifice diameter (needle gauge), polymer solution concentration, and voltage per unit length, on the morphology and diameter of electrospun nanofibers. The needle gauges studied were 16 (1.19 mm), 18 (0.84 mm), and 20 (0.58 mm), and the range of polymer solution concentration studied was from 0.10 g/mL to 0.30 g/mL. The effect of voltage was determined by varying the voltage per unit electrospinning distance, and the range studied was from 0.375 kV/cm to 1.5 kV/cm. In addition, the mass per unit area of the electrospun nanofibers as a function of time was determined and the feasibility of antibiotic (cefazolin) loading into the nanofibers was also studied. The results indicate that the diameter of nanofibers decreased with an increase in needle gauge (decrease in orifice diameter), and increased with an increase in the concentration of the polymer solution. The voltage study demonstrated that the average diameter of the nanofibers decreased with an increase in voltage. However, the effect of voltage on fiber diameter was less pronounced as compared to polymer solution concentration. The results of the areal density study indicated that the mass per unit area of the electrospun nanofibers increased linearly with time. Feasibility of drug incorporation into the nanofibers was demonstrated with the use of cefazolin, a broad‐spectrum antibiotic. Overall, these studies demonstrated that PLAGA nanofibers can be tailored to desired diameters through modifications in processing parameters, and that antibiotics such as cefazolin can be incorporated into these nanofibers. Therefore, PLAGA nanofibers show potential as antibiotic delivery systems for the treatment of wounds. © 2004 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 70B: 286–296, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nanometre diameter fibres of polymer, produced by electrospinning
Reneker, D. H., & Chun, I. (1996) · Nanotechnology · doi:10.1088/0957-4484/7/3/009 · Cited by 3,520
Electrospinning process and applications of electrospun fibers
Doshi, J., & Reneker, D. H. (1995) · Journal of Electrostatics · doi:10.1016/0304-3886(95)00041-8 · Cited by 3,209
Beaded nanofibers formed during electrospinning
Fong, H., Chun, I., & Reneker, D. H. (1999) · Polymer · doi:10.1016/s0032-3861(99)00068-3 · Cited by 2,553
Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
Reneker, D. H., Yarin, A. L., Fong, H., & Koombhongse, S. (2000) · Journal of Applied Physics · doi:10.1063/1.373532 · Cited by 2,462
Jain, R. A. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00115-0 · Cited by 2,214
XX. On the equilibrium of liquid conducting masses charged with electricity
Rayleigh, L. (1882) · The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science · doi:10.1080/14786448208628425 · Cited by 1,825
Polymeric Materials Encyclopedia
(1996) · Polymers and Polymer Composites · doi:10.1177/147823919600400209 · Cited by 1,678
The effective period of preventive antibiotic action in experimental incisions and dermal lesions.
Burke, J. F. (1961) · PubMed · Cited by 1,420
Experimental characterization of electrospinning: the electrically forced jet and instabilities
Shin, Y. M., Hohman, M. M., Brenner, M. P., & Rutledge, G. C. (2001) · Polymer · doi:10.1016/s0032-3861(01)00540-7 · Cited by 1,070
Taylor cone and jetting from liquid droplets in electrospinning of nanofibers
Yarin, A. L., Koombhongse, S., & Reneker, D. H. (2001) · Journal of Applied Physics · doi:10.1063/1.1408260 · Cited by 894
Cited by
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Biodegradable polymers as biomaterials
Nair, L. S., & Laurencin, C. T. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.017 · Cited by 4,416
Self-citationElectrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Wound Healing Dressings and Drug Delivery Systems: A Review
Boateng, J. S., Matthews, K. H., Stevens, H. N. E., & Eccleston, G. M. (2008) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.21210 · Cited by 3,049
Electrospinning of Polymeric Nanofibers for Tissue Engineering Applications: A Review
Pham, Q. P., Sharma, U., & Mikos, A. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.1197 · Cited by 2,256
Haider, A., Haider, S., & Kang, I.-K. (2018) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2015.11.015 · Cited by 1,861
Nanofiber technology: Designing the next generation of tissue engineering scaffolds
Barnes, C. P., Sell, S. A., Boland, E. D., Simpson, D. G., & Bowlin, G. L. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.022 · Cited by 1,141
Nanofibers and their applications in tissue engineering
Vasita, R., & Katti, D. S. (2006) · International Journal of Nanomedicine · doi:10.2147/nano.2006.1.1.15 · Cited by 988
Self-citationFunctional electrospun nanofibrous scaffolds for biomedical applications
Liang, D., Hsiao, B. S., & Chu, B. (2007) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2007.04.021 · Cited by 972
Functional materials by electrospinning of polymers
Agarwal, S., Greiner, A., & Wendorff, J. H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.001 · Cited by 925
Effects of parameters on nanofiber diameter determined from electrospinning model
Thompson, C. J., Chase, G. G., Yarin, A. L., & Reneker, D. H. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.017 · Cited by 838
Electrospun protein fibers as matrices for tissue engineering
Li, M., Mondrinos, M. J., Gandhi, M. R., Ko, F. K., Weiss, A. S., & Lelkes, P. I. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.03.030 · Cited by 792
Self-citationAdvances in three-dimensional nanofibrous macrostructures via electrospinning
Sun, B., Long, Y. Z., Zhang, H. D., Li, M. M., Duvail, J. L., Jiang, X. Y., & Yin, H. L. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.06.002 · Cited by 792
Liao, Y., Loh, C.-H., Tian, M., Wang, R., & Fane, A. G. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2017.10.003 · Cited by 791
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Systematic parameter study for ultra-fine fiber fabrication via electrospinning process
Tan, S.-H., Inai, R., Kotaki, M., & Ramakrishna, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.068 · Cited by 766
Tissue scaffolds for skin wound healing and dermal reconstruction
Zhong, S. P., Zhang, Y. Z., & Lim, C. T. (2010) · WIREs Nanomedicine and Nanobiotechnology · doi:10.1002/wnan.100 · Cited by 687
Abrigo, M., McArthur, S. L., & Kingshott, P. (2014) · Macromolecular Bioscience · doi:10.1002/mabi.201300561 · Cited by 622
Antibiotic-eluting medical devices for various applications
ZILBERMAN, M., & ELSNER, J. (2008) · Journal of Controlled Release · doi:10.1016/j.jconrel.2008.05.020 · Cited by 610
Electrospun nanofiber scaffolds: engineering soft tissues
Kumbar, S. G., James, R., Nukavarapu, S. P., & Laurencin, C. T. (2008) · Biomedical Materials · doi:10.1088/1748-6041/3/3/034002 · Cited by 598
Self-citationNanoparticles and nanofibers for topical drug delivery
Goyal, R., Macri, L. K., Kaplan, H. M., & Kohn, J. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.10.049 · Cited by 590
Electrohydrodynamics: A facile technique to fabricate drug delivery systems
Chakraborty, S., Liao, I.-C., Adler, A., & Leong, K. W. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.013 · Cited by 549
Yoon, K., Kim, K., Wang, X., Fang, D., Hsiao, B. S., & Chu, B. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.042 · Cited by 544
Jiang, H., Hu, Y., Li, Y., Zhao, P., Zhu, K., & Chen, W. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.08.006 · Cited by 533
Antibacterial surfaces for biomedical devices
Vasilev, K., Cook, J., & Griesser, H. J. (2009) · Expert Review of Medical Devices · doi:10.1586/erd.09.36 · Cited by 504
Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering
Narayanan, G., Vernekar, V. N., Kuyinu, E. L., & Laurencin, C. T. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.015 · Cited by 484
Self-citationCancer Nanomedicine: From Drug Delivery to Imaging
Chow, E. K.-H., & Ho, D. (2013) · Science Translational Medicine · doi:10.1126/scitranslmed.3005872 · Cited by 491
Polymer nanofibrous structures: Fabrication, biofunctionalization, and cell interactions
Beachley, V., & Wen, X. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.03.003 · Cited by 490
Electrospinning of polymer nanofibers for tissue regeneration
Jiang, T., Carbone, E. J., Lo, K. W.-H., & Laurencin, C. T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.12.001 · Cited by 487
Self-citationDesigning electrospun nanofiber mats to promote wound healing – a review
Rieger, K. A., Birch, N. P., & Schiffman, J. D. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20795a · Cited by 479
Effects of Humidity and Solution Viscosity on Electrospun Fiber Morphology
Nezarati, R. M., Eifert, M. B., & Cosgriff-Hernandez, E. (2013) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2012.0671 · Cited by 459
Wang, X.-X., Yu, G.-F., Zhang, J., Yu, M., Ramakrishna, S., & Long, Y.-Z. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100704 · Cited by 447
Three-dimensional electrospun ECM-based hybrid scaffolds for cardiovascular tissue engineering
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R. E., & MacLellan, W. R. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.034 · Cited by 445
Controlled release of heparin from poly(ε-caprolactone) electrospun fibers
Luong-Van, E., Grøndahl, L., Chua, K. N., Leong, K. W., Nurcombe, V., & Cool, S. M. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.10.028 · Cited by 445
Electrospinning materials for energy-related applications and devices
Dong, Z., Kennedy, S. J., & Wu, Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.090 · Cited by 437
Electrospun silk biomaterial scaffolds for regenerative medicine
Zhang, X., Reagan, M. R., & Kaplan, D. L. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.07.005 · Cited by 432
Dual growth factor releasing multi-functional nanofibers for wound healing
Xie, Z., Paras, C. B., Weng, H., Punnakitikashem, P., Su, L.-C., Vu, K., Tang, L., Yang, J., & Nguyen, K. T. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.07.030 · Cited by 425
A review on electrospun polymeric nanofibers: Production parameters and potential applications
Ibrahim, H. M., & Klingner, A. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106647 · Cited by 402
Biodegradable polymers for electrospinning: Towards biomedical applications
Kai, D., Liow, S. S., & Loh, X. J. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.04.051 · Cited by 396
Delivery of bone morphogenetic proteins for orthopedic tissue regeneration
Seeherman, H., & Wozney, J. M. (2005) · Cytokine & Growth Factor Reviews · doi:10.1016/j.cytogfr.2005.05.001 · Cited by 389
Xin, X., Hussain, M., & Mao, J. J. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.042 · Cited by 377
Encapsulating drugs in biodegradable ultrafine fibers through co‐axial electrospinning
Huang, Z., He, C., Yang, A., Zhang, Y., Han, X., Yin, J., & Wu, Q. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30564 · Cited by 370
Electrospun polymeric nanofibres as wound dressings: A review
Miguel, S. P., Figueira, D. R., Simões, D., Ribeiro, M. P., Coutinho, P., Ferreira, P., & Correia, I. J. (2018) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2018.05.011 · Cited by 362
Li, M., Mondrinos, M. J., Chen, X., Gandhi, M. R., Ko, F. K., & Lelkes, P. I. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30833 · Cited by 358
Self-citationPillai, C. K. S., & Sharma, C. P. (2010) · Journal of Biomaterials Applications · doi:10.1177/0885328210384890 · Cited by 353
Biological efficacy of silk fibroin nanofiber membranes for guided bone regeneration
Kim, K.-H., Jeong, L., Park, H.-N., Shin, S.-Y., Park, W.-H., Lee, S.-C., Kim, T.-I., Park, Y.-J., Seol, Y.-J., Lee, Y.-M., et al. (2005) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2005.06.033 · Cited by 341
Alavarse, A. C., de Oliveira Silva, F. W., Colque, J. T., da Silva, V. M., Prieto, T., Venancio, E. C., & Bonvent, J.-J. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.03.199 · Cited by 340
Yördem, O. S., Papila, M., & Menceloğlu, Y. Z. (2008) · Materials & Design · doi:10.1016/j.matdes.2006.12.013 · Cited by 336
Chen, M., Patra, P. K., Warner, S. B., & Bhowmick, S. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0205 · Cited by 319
Challenges in Healing Wound: Role of Complementary and Alternative Medicine
Monika, P., Chandraprabha, M. N., Rangarajan, A., Waiker, P. V., & Chidambara Murthy, K. N. (2022) · Frontiers in Nutrition · doi:10.3389/fnut.2021.791899 · Cited by 306
Alginate Nanoparticles for Drug Delivery and Targeting
Severino, P., da Silva, C. F., Andrade, L. N., de Lima Oliveira, D., Campos, J., & Souto, E. B. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190425163424 · Cited by 304
Biopolymer-based biomaterials for accelerated diabetic wound healing: A critical review
Shah, S. A., Sohail, M., Khan, S., Minhas, M. U., de Matas, M., Sikstone, V., Hussain, Z., Abbasi, M., & Kousar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.007 · Cited by 288
Advances in Skin Regeneration: Application of Electrospun Scaffolds
Norouzi, M., Boroujeni, S. M., Omidvarkordshouli, N., & Soleimani, M. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500001 · Cited by 282
The Role of Electrospinning in the Emerging Field of Nanomedicine
Chew, S., Wen, Y., Dzenis, Y., & Leong, K. (2006) · Current Pharmaceutical Design · doi:10.2174/138161206779026326 · Cited by 277
Kim, T. G., & Park, T. G. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.221 · Cited by 272
Ito, Y., Hasuda, H., Kamitakahara, M., Ohtsuki, C., Tanihara, M., Kang, I.-K., & Kwon, O. H. (2005) · Journal of Bioscience and Bioengineering · doi:10.1263/jbb.100.43 · Cited by 272
Electrospun cellular microenvironments: Understanding controlled release and scaffold structure
Szentivanyi, A., Chakradeo, T., Zernetsch, H., & Glasmacher, B. (2011) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2010.12.002 · Cited by 271
Meinel, A. J., Germershaus, O., Luhmann, T., Merkle, H. P., & Meinel, L. (2012) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2012.01.016 · Cited by 270
Fabrication and characterization of chitosan‐gelatin blend nanofibers for skin tissue engineering
Dhandayuthapani, B., Krishnan, U. M., & Sethuraman, S. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31651 · Cited by 261
Recent advancements in electrospinning design for tissue engineering applications: A review
Kishan, A. P., & Cosgriff‐Hernandez, E. M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36124 · Cited by 261
Multiple-jet electrospinning methods for nanofiber processing: A review
SalehHudin, H. S., Mohamad, E. N., Mahadi, W. N. L., & Muhammad Afifi, A. (2018) · Materials and Manufacturing Processes · doi:10.1080/10426914.2017.1388523 · Cited by 255
Development of Filter Media by Electrospinning for Air Filtration of Nanoparticles from PET Bottles
Bonfim, D. P. F., Cruz, F. G. S., Guerra, V. G., & Aguiar, M. L. (2021) · Membranes · doi:10.3390/membranes11040293 · Cited by 60
“fluence of needle diameter on fibers resulting from electrospinning and concluded that reducing the needle diameter resulted in thinner fibers [33].”
BackgroundCarney, B. C., Oliver, M. A., Erdi, M., Kirkpatrick, L. D., Tranchina, S. P., Rozyyev, S., Keyloun, J. W., Saruwatari, M. S., Daristotle, J. L., Moffatt, L. T., et al. (2022) · Burns · doi:10.1016/j.burns.2022.01.012 · Cited by 15
Metadata
- Authors
- Katti, D. S., Robinson, K. W., Ko, F. K., & Laurencin, C. T.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2004-05-10
- Volume
- 70B
- Issue
- 2
- Pages
- 286-296
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2158363156
- Cited by
- 693
- References
- 20
- FWCI
- 10.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.