The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.
A review of materials, fabrication methods, and strategies used to enhance bone regeneration in engineered bone tissues
Abstract
Over the last decade, bone engineered tissues have been developed as alternatives to autografts and allografts to repair and reconstruct bone defects. This article provides a review of the current technologies in bone tissue engineering. Factors used for fabrication of three‐dimensional bone scaffolds such as materials, cells, and biomolecular signals, as well as required properties for ideal bone scaffolds, are reviewed. In addition, current fabrication techniques including rapid prototyping are elaborated upon. Finally, this review article further discusses some effective strategies to enhance cell ingrowth in bone engineered tissues; for example, nanotopography, biomimetic materials, embedded growth factors, mineralization, and bioreactors. In doing so, it suggests that there is a possibility to develop bone substitutes that can repair bone defects and promote new bone formation for orthopedic applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2008
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Chen, D., Zhao, M., & Mundy, G. R. (2004) · Growth Factors · doi:10.1080/08977190412331279890 · Cited by 1,915
Novel bioactive materials with different mechanical properties
Kokubo, T., Kim, H.-M., & Kawashita, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00044-9 · Cited by 1,914
Principles of Tissue Engineering
(2014) · Elsevier eBooks · doi:10.1016/c2011-0-07193-4 · Cited by 1,906
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Biomimetic materials for tissue engineering
Shin, H., Jo, S., & Mikos, A. G. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00339-9 · Cited by 1,612
Hutmacher, D. W., Schantz, T., Zein, I., Ng, K. W., Teoh, S. H., & Tan, K. C. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200105)55:2<203::aid-jbm1007>3.0.co;2-7 · Cited by 1,409
Department of Materials, U. O. O., Sachlos, E., & Czernuszka, J. (2003) · European Cells and Materials · doi:10.22203/ecm.v005a03 · Cited by 1,303
Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function
Ducheyne, P., & Qiu, Q. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00181-7 · Cited by 1,133
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Review: Mesenchymal Stem Cells: Cell–Based Reconstructive Therapy in Orthopedics
Caplan, A. I. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1198 · Cited by 822
Effect of Pore Size and Void Fraction on Cellular Adhesion, Proliferation, and Matrix Deposition
Zeltinger, J., Sherwood, J. K., Graham, D. A., Müeller, R., & Griffith, L. G. (2001) · Tissue Engineering · doi:10.1089/107632701753213183 · Cited by 794
Developing bioactive composite materials for tissue replacement
Wang, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00037-1 · Cited by 753
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Laurencin, C., Khan, Y., & El-Amin, S. F. (2006) · Expert Review of Medical Devices · doi:10.1586/17434440.3.1.49 · Cited by 716
Bone-Graft Substitutes: Facts, Fictions, and Applications
Greenwald, A. S., Boden, S. D., Goldberg, V. M., Khan, Y., Laurencin, C. T., & Rosier, R. N. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200100022-00007 · Cited by 703
In vitro and in vivo degradation of porous poly(dl-lactic-co-glycolic acid) foams
Lu, L., Peter, S. J., D. Lyman, M., Lai, H.-L., Leite, S. M., Tamada, J. A., Uyama, S., Vacanti, J. P., Langer, R., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00047-8 · Cited by 668
Laminated three-dimensional biodegradable foams for use in tissue engineering
Mikos, A. G., Sarakinos, G., Leite, S. M., Vacant, J. P., & Langer, R. (1993) · Biomaterials · doi:10.1016/0142-9612(93)90049-8 · Cited by 666
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Landers, R., Hübner, U., Schmelzeisen, R., & Mülhaupt, R. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00139-4 · Cited by 624
Bone Morphogenetic Protein and Bone Morphogenetic Protein Gene Family in Bone Formation and Repair
Wozney, J. M., & Rosen, V. (1998) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199801000-00006 · Cited by 611
Use of stereolithography to manufacture critical‐sized 3D biodegradable scaffolds for bone ingrowth
Cooke, M. N., Fisher, J. P., Dean, D., Rimnac, C., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.10485 · Cited by 571
Meinel, L., Karageorgiou, V., Fajardo, R., Snyder, B., Shinde-Patil, V., Zichner, L., Kaplan, D., Langer, R., & Vunjak-Novakovic, G. (2004) · Annals of Biomedical Engineering · doi:10.1023/b:abme.0000007796.48329.b4 · Cited by 561
Injectable biodegradable materials for orthopedic tissue engineering
Temenoff, J. S., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00108-3 · Cited by 554
Biomaterials and bone mechanotransduction
Sikavitsas, V. I., Temenoff, J. S., & Mikos, A. G. (2001) · Biomaterials · doi:10.1016/s0142-9612(01)00002-3 · Cited by 519
Mastrogiacomo, M., Scaglione, S., Martinetti, R., Dolcini, L., Beltrame, F., Cancedda, R., & Quarto, R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.031 · Cited by 509
Shahdadfar, A., Frønsdal, K., Haug, T., Reinholt, F. P., & Brinchmann, J. E. (2005) · STEM CELLS · doi:10.1634/stemcells.2005-0094 · Cited by 501
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Orthopaedic applications for PLA‐PGA biodegradable polymers
Athanasiou, K., Agrawal, C., Barber, F., & Burkhart, S. (1998) · Arthroscopy · doi:10.1016/s0749-8063(98)70099-4 · Cited by 487
Sikavitsas, V. I., Bancroft, G. N., Holtorf, H. L., Jansen, J. A., & Mikos, A. G. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2434367100 · Cited by 472
Injectable gels for tissue engineering
Gutowska, A., Jeong, B., & Jasionowski, M. (2001) · The Anatomical Record · doi:10.1002/ar.1115 · Cited by 441
Rapid Prototyping: Principles and Applications (with Companion CD-ROM)
Chua, C. K., Leong, K. F., & Lim, C. S. (2003) · WORLD SCIENTIFIC eBooks · doi:10.1142/5064 · Cited by 413
Datta, N., P. Pham, Q., Sharma, U., Sikavitsas, V. I., Jansen, J. A., & Mikos, A. G. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0505661103 · Cited by 411
Gomes, M. E., Sikavitsas, V. I., Behravesh, E., Reis, R. L., & Mikos, A. G. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10075 · Cited by 376
Nanobiomaterial applications in orthopedics
Christenson, E. M., Anseth, K. S., van den Beucken, J. J. J. P., Chan, C. K., Ercan, B., Jansen, J. A., Laurencin, C. T., Li, W., Murugan, R., Nair, L. S., et al. (2007) · Journal of Orthopaedic Research · doi:10.1002/jor.20305 · Cited by 354
Integrins as linker proteins between osteoblasts and bone replacing materials. A critical review
Siebers, M. C., ter Brugge, P. J., Walboomers, X. F., & Jansen, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.02.021 · Cited by 352
Novel collagen scaffolds with predefined internal morphology made by solid freeform fabrication
Sachlos, E. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00528-8 · Cited by 350
Micro and nano-fabrication of biodegradable polymers for drug delivery
Lu, Y., & Chen, S. C. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.05.002 · Cited by 340
Osteoprogenitor response to defined topographies with nanoscale depths
Dalby, M. J., McCloy, D., Robertson, M., Wilkinson, C. D. W., & Oreffo, R. O. C. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.08.028 · Cited by 319
Extracellular Matrix Cell Adhesion Peptides: Functional Applications in Orthopedic Materials
LeBaron, R. G., & Athanasiou, K. A. (2000) · Tissue Engineering · doi:10.1089/107632700320720 · Cited by 306
Yu, X., Botchwey, E. A., Levine, E. M., Pollack, S. R., & Laurencin, C. T. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0402532101 · Cited by 296
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique
Yan, Y., Wang, X., Pan, Y., Liu, H., Cheng, J., Xiong, Z., Lin, F., Wu, R., Zhang, R., & Lu, Q. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.027 · Cited by 284
Liao, C., Chen, C., Chen, J., Chiang, S., Lin, Y., & Chang, K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10030 · Cited by 283
Fabrication of 3D chitosan–hydroxyapatite scaffolds using a robotic dispensing system
Ang, T. H., Sultana, F. S. A., Hutmacher, D. W., Wong, Y. S., Fuh, J. Y. H., Mo, X. M., Loh, H. T., Burdet, E., & Teoh, S. H. (2002) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(02)00010-3 · Cited by 278
Scaffold fabrication by indirect three-dimensional printing
Lee, M., Dunn, J. C. Y., & Wu, B. M. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.10.040 · Cited by 267
Osteoblast function on synthetic biodegradable polymers
Ishaug, S. L., Yaszemski, M. J., Bizios, R., & Mikos, A. G. (1994) · Journal of Biomedical Materials Research · doi:10.1002/jbm.820281210 · Cited by 252
Wang, M. (1998) · Biomaterials · doi:10.1016/s0142-9612(98)00154-9 · Cited by 240
Integrated microsystems for controlled drug delivery
Zafar Razzacki, S. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2003.08.012 · Cited by 224
Vermes, C., Chandrasekaran, R., Jacobs, J. J., Galante, J. O., Roebuck, K. A., & Glant, T. T. (2001) · The Journal of Bone and Joint Surgery-American Volume · doi:10.2106/00004623-200102000-00007 · Cited by 220
In vitro degradation of porous poly(l-lactic acid) foams
Lu, L., Peter, S. J., Lyman, M. D., Lai, H.-L., Leite, S. M., A. Tamada, J., Vacanti, J. P., Langer, R., & Mikos, A. G. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00048-x · Cited by 218
Mendes, S. C., Tibbe, J. M., Veenhof, M., Bakker, K., Both, S., Platenburg, P. P., Oner, F. C., de Bruijn, J. D., & van Blitterswijk, C. A. (2002) · Tissue Engineering · doi:10.1089/107632702320934010 · Cited by 215
Selective laser sintering of biocompatible polymers for applications in tissue engineering
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Gui, W. S., Tan, W. S., & Wiria, F. E. (2005) · Bio-Medical Materials and Engineering · doi:10.1177/0959298920050151-2012 · Cited by 207
Shin, H., Quinten Ruhé, P., Mikos, A. G., & Jansen, J. A. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00168-6 · Cited by 204
Enhancement of in vitro osteogenesis on titanium by chemically produced nanotopography
de Oliveira, P. T., Zalzal, S. F., Beloti, M. M., Rosa, A. L., & Nanci, A. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30955 · Cited by 203
Holtorf, H. L., Jansen, J. A., & Mikos, A. G. (2005) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30251 · Cited by 197
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
Human foetal osteoblastic cell response to polymer-demixed nanotopographic interfaces
Lim, J. Y., Hansen, J. C., Siedlecki, C. A., Runt, J., & Donahue, H. J. (2005) · Journal of The Royal Society Interface · doi:10.1098/rsif.2004.0019 · Cited by 191
Curodeau, A., Sachs, E., & Caldarise, S. (2000) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(200009)53:5<525::aid-jbm12>3.0.co;2-1 · Cited by 173
Tissue engineered bone-regeneration using degradable polymers: The formation of mineralized matrices
Laurencin, C. T., Attawia, M. A., Elgendy, H. E., & Herbert, K. M. (1996) · Bone · doi:10.1016/s8756-3282(96)00132-9 · Cited by 168
New synthetic biodegradable polymers as BMP carriers for bone tissue engineering
Saito, N., & Takaoka, K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00040-1 · Cited by 153
Peter, S. J., Liang, C. R., Kim, D. J., Widmer, M. S., & Mikos, A. G. (1998) · Journal of Cellular Biochemistry · Cited by 138
Flow Perfusion Improves Seeding of Tissue Engineering Scaffolds with Different Architectures
Álvarez-Barreto, J. F., Linehan, S. M., Shambaugh, R. L., & Sikavitsas, V. I. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-006-9244-z · Cited by 124
Effects of orthopaedic wear particles on osteoprogenitor cells
Goodman, S. B., Ma, T., Chiu, R., Ramachandran, R., & Smith, R. L. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.08.023 · Cited by 124
Delivery systems for bone growth factors — the new players in skeletal regeneration
Rose, F. R. A. J., Hou, Q., & Oreffo, R. O. C. (2004) · Journal of Pharmacy and Pharmacology · doi:10.1211/0022357023312 · Cited by 115
Potential Role of Fibroblast Growth Factor in Enhancement of Fracture Healing
Radomsky, M. L., Thompson, A. Y., Spiro, R. C., & Poser, J. W. (1998) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199810001-00029 · Cited by 113
Mehlhorn, A. T., Niemeyer, P., Kaiser, S., Finkenzeller, G., Stark, G. B., Südkamp, N. P., & Schmal, H. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.2853 · Cited by 111
Characterization of microfeatures in selective laser sintered drug delivery devices
Cheah, C. M., Leong, K. F., Chua, C. K., Low, K. H., & Quek, H. S. (2002) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1243/095441102321032166 · Cited by 108
Composition Options for Tissue-Engineered Bone
Orban, J. M., Marra, K. G., & Hollinger, J. O. (2002) · Tissue Engineering · doi:10.1089/107632702760240454 · Cited by 108
Nanotopography: Cellular Responses to Nanostructured Materials
Kriparamanan, R., Aswath, P. B., Zhou, A., Tang, L., & Nguyen, K. T. (2006) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2006.330 · Cited by 108
Self-citationFreeform fabrication of Nylon‐6 tissue engineering scaffolds
Das, S., Hollister, S. J., Flanagan, C. L., Adewunmi, A., Bark, K., Chen, C. S., Ramaswamy, K., Rose, D., & Widjaja, E. (2003) · Rapid Prototyping Journal · doi:10.1108/13552540310455656 · Cited by 99
Porter, N. L., Pilliar, R. M., & Grynpas, M. D. (2001) · Journal of Biomedical Materials Research · doi:10.1002/1097-4636(20010915)56:4<504::aid-jbm1122>3.0.co;2-j · Cited by 95
Mesenchymal Stem Cells for Bone Repair: Preclinical Studies and Potential Orthopedic Applications
Arinzeh, T. L. (2005) · Foot and Ankle Clinics · doi:10.1016/j.fcl.2005.06.004 · Cited by 95
Evaluation of Ad‐BMP‐2 for enhancing fracture healing in an infected defect fracture rabbit model
Southwood, L. L., Frisbie, D. D., Kawcak, C. E., Ghivizzani, S. C., Evans, C. H., & McIlwraith, C. W. (2003) · Journal of Orthopaedic Research® · doi:10.1016/s0736-0266(03)00129-3 · Cited by 94
Customization of Load‐Bearing Hydroxyapatite Lattice Scaffolds
Cesarano, J., Dellinger, J. G., Saavedra, M. P., Gill, D., Jamison, R. D., Grosser, B., Sinn-Hanlon, J., & Goldwasser, M. S. (2005) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2005.02026.x · Cited by 87
Tissue engineering: TGF-β superfamily members and delivery systems in bone regeneration
Ramoshebi, L. N., Matsaba, T., Teare, J., Renton, L. F., Patton, J. C., & Ripamonti, U. (2002) · Expert Reviews in Molecular Medicine · doi:10.1017/s1462399402004969 · Cited by 87
The effect of nanotopography on calcium and phosphorus deposition on metallic materials in vitro
Ward, B. C., & Webster, T. J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.12.027 · Cited by 83
Immunolocalization of alkaline phosphatase in osteoblasts and matrix vesicles of human fetal bone
Morris, D. C., Masuhara, K., Takaoka, K., Ono, K., & Anderson, H. C. (1992) · Bone and Mineral · doi:10.1016/0169-6009(92)90877-g · Cited by 80
Bone engineering by controlled delivery of osteoinductive molecules and cells
Leach, J. K., & Mooney, D. J. (2004) · Expert Opinion on Biological Therapy · doi:10.1517/14712598.4.7.1015 · Cited by 71
Delivery of Growth Factors Using Gene Therapy to Enhance Bone Healing
Southwood, L. L., Frisbie, D. D., Kawcak, C. E., & McIlwraith, C. W. (2004) · Veterinary Surgery · doi:10.1111/j.1532-950x.2004.04080.x · Cited by 69
Vermes, C., Glant, T., Hallab, N., Fritz, E. A., Roebuck, K., & Jacobs, J. (2001) · Journal of Arthroplasty · doi:10.1054/arth.2001.28719 · Cited by 68
Payne, R. G., McGonigle, J. S., Yaszemski, M. J., Yasko, A. W., & Mikos, A. G. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00185-0 · Cited by 62
Quantitative analysis of three‐dimensional fluid flow in rotating bioreactors for tissue engineering
Botchwey, E. A., Pollack, S. R., Levine, E. M., Johnston, E. D., & Laurencin, C. T. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10163 · Cited by 54
Stem cells: the next therapeutic frontier.
Humes, H. D. (2005) · PubMed · Cited by 26
Cell and tissue engineering and clinical applications: An overview
Stoltz, J. F., Bensoussan, D., Decot, V., Netter, P., Ciree, A., & Gillet, P. (2006) · Bio-Medical Materials and Engineering · doi:10.1177/09592989200601600401001 · Cited by 20
Cited by
Wang, X., Xu, S., Zhou, S., Xu, W., Leary, M., Choong, P., Qian, M., Brandt, M., & Xie, Y. M. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.012 · Cited by 2,121
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Polycaprolactone as biomaterial for bone scaffolds: Review of literature
Dwivedi, R., Kumar, S., Pandey, R., Mahajan, A., Nandana, D., Katti, D. S., & Mehrotra, D. (2020) · Journal of Oral Biology and Craniofacial Research · doi:10.1016/j.jobcr.2019.10.003 · Cited by 717
Strategies for controlled delivery of growth factors and cells for bone regeneration
Vo, T. N., Kasper, F. K., & Mikos, A. G. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.01.016 · Cited by 666
Medical 3D Printing for the Radiologist
Mitsouras, D., Liacouras, P., Imanzadeh, A., Giannopoulos, A. A., Cai, T., Kumamaru, K. K., George, E., Wake, N., Caterson, E. J., Pomahac, B., et al. (2015) · RadioGraphics · doi:10.1148/rg.2015140320 · Cited by 619
Metadata
- Authors
- Stevens, B., Yang, Y., Mohandas, A., Stucker, B., & Nguyen, K. T.
- Venue
- Journal of Biomedical Materials Research Part B: Applied Biomaterials
- Publisher
- Wiley
- Published
- 2007-10-15
- Volume
- 85B
- Issue
- 2
- Pages
- 573-582
- ISSN
- 1552-4973 (ISSN-L)
- 1552-4981
- OpenAlex
- W2121718687
- Cited by
- 326
- References
- 85
- FWCI
- 7.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.