The DOI matches its Crossref record.
Quantitative assessment of scaffold and growth factor‐mediated repair of critically sized bone defects
Abstract
An 8‐mm rat segmental defect model was used to evaluate quantitatively the ability of longitudinally oriented poly(L‐lactide‐co‐D,L‐lactide) scaffolds with or without growth factors to promote bone healing. BMP‐2 and TGF‐β3, combined with RGD‐alginate hydrogel, were co‐delivered to femoral defects within the polymer scaffolds at a dose previously shown to synergistically induce ectopic mineralization. A novel modular composite implant design was used to achieve reproducible stable fixation, provide a window for longitudinal in vivo micro‐CT monitoring of 3D bone ingrowth, and allow torsional biomechanical testing of functional integration. Sequential micro‐CT analysis showed that bone ingrowth increased significantly between 4 and 16 weeks for the scaffold‐treated defects with or without growth factors, but no increase with time was observed in empty defect controls. Treatment with scaffold alone improved defect stability at 16 weeks compared to nontreatment, but did not achieve bone union or restoration of mechanical function. Augmentation of scaffolds with BMP‐2 and TGF‐β3 significantly increased bone formation at both 4 and 16 weeks compared to nontreatment, but only produced bone bridging of the defect region in two of six cases. Histological evaluation indicated that bone formed first at the periphery of the scaffolds, followed by more limited mineral deposition within the scaffold interior, suggesting that the cells participating in the initial healing response were primarily derived from periosteum. This study introduces a challenging segmental defect model that facilitates quantitative evaluation of strategies to repair critically sized bone defects. Healing of the defect region was improved by implanting structural polymeric scaffolds infused with growth factors incorporated within RGD‐alginate. However, functional integration of the constructs appeared limited by continued presence of slow‐degrading scaffolds and suboptimal dose or delivery of osteoinductive signals. © 2007 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 25:941–950, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Osteogenesis and angiogenesis: The potential for engineering bone
Bone & Joint Research Group, C. F. H. D., Kanczler, J., & Oreffo, R. (2008) · European Cells and Materials · doi:10.22203/ecm.v015a08 · Cited by 987
Strategies for controlled delivery of growth factors and cells for bone regeneration
Vo, T. N., Kasper, F. K., & Mikos, A. G. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.01.016 · Cited by 666
Toward delivery of multiple growth factors in tissue engineering
Chen, F.-M., Zhang, M., & Wu, Z.-F. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.053 · Cited by 649
Patel, Z. S., Young, S., Tabata, Y., Jansen, J. A., Wong, M. E. K., & Mikos, A. G. (2008) · Bone · doi:10.1016/j.bone.2008.06.019 · Cited by 580
Kolambkar, Y. M., Dupont, K. M., Boerckel, J. D., Huebsch, N., Mooney, D. J., Hutmacher, D. W., & Guldberg, R. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.08.074 · Cited by 500
Self-citationThe challenge of establishing preclinical models for segmental bone defect research
Reichert, J. C., Saifzadeh, S., Wullschleger, M. E., Epari, D. R., Schütz, M. A., Duda, G. N., Schell, H., van Griensven, M., Redl, H., & Hutmacher, D. W. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2008.12.050 · Cited by 433
Bone defect animal models for testing efficacy of bone substitute biomaterials
Li, Y., Chen, S.-K., Li, L., Qin, L., Wang, X.-L., & Lai, Y.-X. (2015) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2015.05.002 · Cited by 430
Engineering anatomically shaped human bone grafts
Grayson, W. L., Fröhlich, M., Yeager, K., Bhumiratana, S., Chan, M. E., Cannizzaro, C., Wan, L. Q., Liu, X. S., Guo, X. E., & Vunjak-Novakovic, G. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0905439106 · Cited by 425
Biomimetic Materials and Fabrication Approaches for Bone Tissue Engineering
Kim, H. D., Amirthalingam, S., Kim, S. L., Lee, S. S., Rangasamy, J., & Hwang, N. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700612 · Cited by 392
Role of angiogenesis in bone repair
Saran, U., Gemini Piperni, S., & Chatterjee, S. (2014) · Archives of Biochemistry and Biophysics · doi:10.1016/j.abb.2014.07.006 · Cited by 362
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
Effects of protein dose and delivery system on BMP-mediated bone regeneration
Boerckel, J. D., Kolambkar, Y. M., Dupont, K. M., Uhrig, B. A., Phelps, E. A., Stevens, H. Y., García, A. J., & Guldberg, R. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.03.063 · Cited by 323
Self-citationAdvanced smart biomaterials and constructs for hard tissue engineering and regeneration
Zhang, K., Wang, S., Zhou, C., Cheng, L., Gao, X., Xie, X., Sun, J., Wang, H., Weir, M. D., Reynolds, M. A., et al. (2018) · Bone Research · doi:10.1038/s41413-018-0032-9 · Cited by 317
Design and Fabrication of Tubular Scaffolds via Direct Writing in a Melt Electrospinning Mode
Brown, T. D., Slotosch, A., Thibaudeau, L., Taubenberger, A., Loessner, D., Vaquette, C., Dalton, P. D., & Hutmacher, D. W. (2012) · Biointerphases · doi:10.1007/s13758-011-0013-7 · Cited by 299
Cell-free and cell-based approaches for bone regeneration
Bueno, E. M., & Glowacki, J. (2009) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2009.228 · Cited by 279
Imaging challenges in biomaterials and tissue engineering
Appel, A. A., Anastasio, M. A., Larson, J. C., & Brey, E. M. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2013.05.033 · Cited by 273
Bioactive Materials for Bone Regeneration: Biomolecules and Delivery Systems
Szwed-Georgiou, A., Płociński, P., Kupikowska-Stobba, B., Urbaniak, M. M., Rusek-Wala, P., Szustakiewicz, K., Piszko, P., Krupa, A., Biernat, M., Gazińska, M., et al. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00609 · Cited by 269
Lee, S. S., Huang, B. J., Kaltz, S. R., Sur, S., Newcomb, C. J., Stock, S. R., Shah, R. N., & Stupp, S. I. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.10.005 · Cited by 267
Bone regeneration mediated by biomimetic mineralization of a nanofiber matrix
Mata, A., Geng, Y., Henrikson, K. J., Aparicio, C., Stock, S. R., Satcher, R. L., & Stupp, S. I. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.013 · Cited by 260
Young, S., Patel, Z. S., Kretlow, J. D., Murphy, M. B., Mountziaris, P. M., Baggett, L. S., Ueda, H., Tabata, Y., Jansen, J. A., Wong, M., et al. (2009) · Tissue Engineering Part A · doi:10.1089/ten.tea.2008.0510 · Cited by 255
Comparative stability studies of poly(2-methyl-2-oxazoline) and poly(ethylene glycol) brush coatings
Pidhatika, B., Rodenstein, M., Chen, Y., Rakhmatullina, E., Mühlebach, A., Acikgöz, C., Textor, M., & Konradi, R. (2012) · Biointerphases · doi:10.1007/s13758-011-0001-y · Cited by 251
Bone regeneration with BMP-2 delivered from keratose scaffolds
de Guzman, R. C., Saul, J. M., Ellenburg, M. D., Merrill, M. R., Coan, H. B., Smith, T. L., & Van Dyke, M. E. (2013) · Biomaterials · doi:10.1016/j.biomaterials.2012.11.002 · Cited by 147
Kim, T.-H., Yun, Y.-P., Park, Y.-E., Lee, S.-H., Yong, W., Kundu, J., Jung, J. W., Shim, J.-H., Cho, D.-W., Kim, S. E., et al. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/2/025008 · Cited by 42
Ehlen, Q. T., Costello, J. P., Mirsky, N. A., Slavin, B. V., Parra, M., Ptashnik, A., Nayak, V. V., Coelho, P. G., & Witek, L. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01279 · Cited by 29
Saul, J. M., Bohnert, J. S., O’Brien, M., Alnuaimi, S., Carnwath, T. P., Dunivan, Q., Coffin, D. W., & Smith, T. L. (2025) · Tissue Engineering and Regenerative Medicine · doi:10.1007/s13770-025-00747-4 · Cited by 3
“A custom-built internal fixator device was designed and implanted as described previously [16, 17].”
Metadata
- Authors
- Oest, M. E., Dupont, K. M., Kong, H., Mooney, D. J., & Guldberg, R. E.
- Venue
- Journal of Orthopaedic Research
- Publisher
- Wiley
- Published
- 2007-04-05
- Volume
- 25
- Issue
- 7
- Pages
- 941-950
- ISSN
- 0736-0266 (ISSN-L)
- 1554-527X
- OpenAlex
- W2061024977
- Cited by
- 249
- References
- 0
- FWCI
- 12.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.