The DOI matches its Crossref record; 105 of the 105 references it cites were found in a registry or an index.
Evaluation of the BET Theory for the Characterization of Meso and Microporous MOFs
Open accessAbstract
Surface area determination with the Brunauer–Emmett–Teller (BET) method is a widely used characterization technique for metal–organic frameworks (MOFs). Since these materials are highly porous, the use of the BET theory can be problematic. Several researchers have evaluated the BET method to gain insights into the usefulness of the obtained results and interestingly, their findings are not always consistent. In this review, the suitability of the BET method is discussed for MOFs that have a diverse range of pore widths below the diameters of N 2 or Ar and above 20 Å. In addition, the surface area of MOFs that are obtained by implementing different approaches, such as grand canonical Monte Carlo simulations, calculations from the crystal structures or based on experimental N 2, Ar, or CO 2 adsorption isotherms, are compared and evaluated. Inconsistencies in the state‐of‐the‐art are also noted. Based on the current literature, an overview is provided of how the BET method can give useful estimations of the surface areas for the majority of MOFs, but there are some crucial and specific exceptions which are highlighted in this review.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
The Chemistry and Applications of Metal-Organic Frameworks
Furukawa, H., Cordova, K. E., O’Keeffe, M., & Yaghi, O. M. (2013) · Science · doi:10.1126/science.1230444 · Cited by 16,945
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
Luminescent metal–organic frameworks
Allendorf, M. D., Bauer, C. A., Bhakta, R. K., & Houk, R. J. T. (2009) · Chemical Society Reviews · doi:10.1039/b802352m · Cited by 4,960
Horcajada, P., Chalati, T., Serre, C., Gillet, B., Sebrie, C., Baati, T., Eubank, J. F., Heurtaux, D., Clayette, P., Kreuz, C., et al. (2010) · Nature Materials · doi:10.1038/nmat2608 · Cited by 4,260
A homochiral metal–organic porous material for enantioselective separation and catalysis
Seo, J. S., Whang, D., Lee, H., Jun, S. I., Oh, J., Jeon, Y. J., & Kim, K. (2000) · Nature · doi:10.1038/35010088 · Cited by 3,924
Ultrahigh Porosity in Metal-Organic Frameworks
Furukawa, H., Ko, N., Go, Y. B., Aratani, N., Choi, S. B., Choi, E., Yazaydin, A. Ö., Snurr, R. Q., O’Keeffe, M., Kim, J., et al. (2010) · Science · doi:10.1126/science.1192160 · Cited by 3,904
James, S. L. (2003) · Chemical Society Reviews · doi:10.1039/b200393g · Cited by 3,580
Applications of metal–organic frameworks in heterogeneous supramolecular catalysis
Liu, J., Chen, L., Cui, H., Zhang, J., Zhang, L., & Su, C.-Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00094c · Cited by 2,894
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Principles of colloid and surface chemistry
Matijević, E. (1979) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(79)90045-6 · Cited by 2,781
Strategies for Hydrogen Storage in Metal–Organic Frameworks
Rowsell, J. L. C., & Yaghi, O. M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462786 · Cited by 2,463
ENCYCLOPEDIA OF Surface and Colloid Science
Somasundaran, P., & Hubbard, A. T. (2021) · CRC Press eBooks · doi:10.1201/9780367813437 · Cited by 2,104
Metal–Organic Framework Materials with Ultrahigh Surface Areas: Is the Sky the Limit?
Farha, O. K., Eryazici, I., Jeong, N. C., Hauser, B. G., Wilmer, C. E., Sarjeant, A. A., Snurr, R. Q., Nguyen, S. T., Yazaydın, A. Ö., & Hupp, J. T. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3055639 · Cited by 1,958
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Characterization of Porous Solids and Powders: Surface Area, Pore Size and Density
Lowell, S., Shields, J. E., Thomas, M. A., & Thommes, M. (2004) · Particle Technology Series · doi:10.1007/978-1-4020-2303-3 · Cited by 1,824
Principles of Adsorption and Reaction on Solid Surfaces
Masel, R. I. (1996) · Cited by 1,528
Gugale, G. S., Pujari‐Palmer, S., Basutkar, P. H., Jadhav, S., Shinde, V., & Ubale, V. P. (2019) · Cited by 1,281
Wu, H. B., & Lou, X. W. (. (2017) · Science Advances · doi:10.1126/sciadv.aap9252 · Cited by 1,103
Recent advances in the textural characterization of hierarchically structured nanoporous materials
Cychosz, K. A., Guillet-Nicolas, R., García-Martínez, J., & Thommes, M. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00391e · Cited by 1,060
Walton, K. S., & Snurr, R. Q. (2007) · Journal of the American Chemical Society · doi:10.1021/ja071174k · Cited by 1,029
Semiconductor Behavior of a Metal‐Organic Framework (MOF)
Alvaro, M., Carbonell, E., Ferrer, B., Llabrés i Xamena, F. X., & Garcia, H. (2007) · Chemistry – A European Journal · doi:10.1002/chem.200601003 · Cited by 949
The use of nitrogen adsorption for the characterisation of porous materials
Sing, K. (2001) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(01)00612-4 · Cited by 923
The Adsorption of Gases and Vapours
ADAM, N. K. (1945) · Nature · doi:10.1038/155154a0 · Cited by 907
Principles and Practice of Heterogeneous Catalysis
(2015) · Focus on Catalysts · doi:10.1016/j.focat.2015.08.046 · Cited by 905
Postsynthetic Tuning of Metal–Organic Frameworks for Targeted Applications
Islamoglu, T., Goswami, S., Li, Z., Howarth, A. J., Farha, O. K., & Hupp, J. T. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00577 · Cited by 796
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Physical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Heterogeneous Catalysis in Zeolites, Mesoporous Silica, and Metal–Organic Frameworks
Liang, J., Liang, Z., Zou, R., & Zhao, Y. (2017) · Advanced Materials · doi:10.1002/adma.201701139 · Cited by 752
Best Practices for the Synthesis, Activation, and Characterization of Metal–Organic Frameworks
Howarth, A. J., Peters, A. W., Vermeulen, N. A., Wang, T. C., Hupp, J. T., & Farha, O. K. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02626 · Cited by 746
Guan, B. Y., Yu, X. Y., Wu, H. B., & Lou, X. W. (. (2017) · Advanced Materials · doi:10.1002/adma.201703614 · Cited by 733
(1996) · The Kluwer International Series in Engineering and Computer Science · doi:10.1007/978-1-4613-1375-5 · Cited by 703
Fan, L., & Zhu, C. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511530142 · Cited by 656
Frost, H., Düren, T., & Snurr, R. Q. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp060433+ · Cited by 595
Calculating Geometric Surface Areas as a Characterization Tool for Metal−Organic Frameworks
Düren, T., Millange, F., Férey, G., Walton, K. S., & Snurr, R. Q. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp074723h · Cited by 556
A sol–gel monolithic metal–organic framework with enhanced methane uptake
Tian, T., Zeng, Z., Vulpe, D., Casco, M. E., Divitini, G., Midgley, P. A., Silvestre-Albero, J., Tan, J.-C., Moghadam, P. Z., & Fairen-Jimenez, D. (2018) · Nature Materials · doi:10.1038/nmat5050 · Cited by 549
Powder Surface Area and Porosity
Lowell, S., & Shields, J. E. (1984) · Springer eBooks · doi:10.1007/978-94-009-5562-2 · Cited by 549
Cerium Metal–Organic Framework for Photocatalysis
Wu, X.-P., Gagliardi, L., & Truhlar, D. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03613 · Cited by 525
Millange, F., Serre, C., & Férey, G. (2002) · Chemical Communications · doi:10.1039/b201381a · Cited by 505
Karagiaridi, O., Lalonde, M. B., Bury, W., Sarjeant, A. A., Farha, O. K., & Hupp, J. T. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308786r · Cited by 473
Recent advances in zeolite chemistry and catalysis
Weckhuysen, B. M., & Yu, J. (2015) · Chemical Society Reviews · doi:10.1039/c5cs90100f · Cited by 465
Adsorption technology and design
Thomas, W. J., & Crittenden, B. D. (1998) · Cited by 441
Gelb, L. D., & Gubbins, K. E. (1998) · Langmuir · doi:10.1021/la9710379 · Cited by 432
Ultrahigh Surface Area Zirconium MOFs and Insights into the Applicability of the BET Theory
Wang, T. C., Bury, W., Gómez-Gualdrón, D. A., Vermeulen, N. A., Mondloch, J. E., Deria, P., Zhang, K., Moghadam, P. Z., Sarjeant, A. A., Snurr, R. Q., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512973b · Cited by 425
Fundamentals of interface and colloid science, volume II. Solid-liquid interfaces
Parsons, R. (1997) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(97)80106-4 · Cited by 422
Galarneau, A., Cambon, H., Di Renzo, F., & Fajula, F. (2001) · Langmuir · doi:10.1021/la0105477 · Cited by 422
Adsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Usefulness of CO2 adsorption at 273 K for the characterization of porous carbons
Lozano-Castelló, D., Cazorla-Amorós, D., & Linares-Solano, A. (2004) · Carbon · doi:10.1016/j.carbon.2004.01.037 · Cited by 399
Titanium-based metal–organic frameworks for photocatalytic applications
Zhu, J., Li, P.-Z., Guo, W., Zhao, Y., & Zou, R. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.12.013 · Cited by 347
Bae, Y.-S., Yazaydın, A. Ö., & Snurr, R. Q. (2010) · Langmuir · doi:10.1021/la100449z · Cited by 342
Engineering nanostructures of PGM-free oxygen-reduction catalysts using metal-organic frameworks
Zhang, H., Osgood, H., Xie, X., Shao, Y., & Wu, G. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.033 · Cited by 336
A new MOF-505@GO composite with high selectivity for CO2/CH4 and CO2/N2 separation
Chen, Y., Lv, D., Wu, J., Xiao, J., Xi, H., Xia, Q., & Li, Z. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.138 · Cited by 325
Zhao, H., Chen, Y., Peng, Q., Wang, Q., & Zhao, G. (2017) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.09.074 · Cited by 325
Quantum-Chemical Characterization of the Properties and Reactivities of Metal–Organic Frameworks
Odoh, S. O., Cramer, C. J., Truhlar, D. G., & Gagliardi, L. (2015) · Chemical Reviews · doi:10.1021/cr500551h · Cited by 306
Studies in Surface Science and Catalysis
(2006) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(06)89002-6 · Cited by 302
Gómez-Gualdrón, D. A., Moghadam, P. Z., Hupp, J. T., Farha, O. K., & Snurr, R. Q. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10266 · Cited by 297
Inverted metal–organic frameworks: solid-state hosts with modular functionality
Papaefstathiou, G. S., & MacGillivray, L. R. (2003) · Coordination Chemistry Reviews · doi:10.1016/s0010-8545(03)00122-x · Cited by 294
Rowsell, J. L. C., Eckert, J., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0542690 · Cited by 294
Superhigh surface area determination of microporous solids
Kaneko, K., & Ishii, C. (1992) · Colloids and Surfaces · doi:10.1016/0166-6622(92)80299-h · Cited by 282
Leng, F., Liu, H., Ding, M., Lin, Q.-P., & Jiang, H.-L. (2018) · ACS Catalysis · doi:10.1021/acscatal.8b00764 · Cited by 266
Trends in Aluminium‐Based Intercalation Batteries
Ambroz, F., Macdonald, T. J., & Nann, T. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602093 · Cited by 253
Self-citationFlexibility in Metal–Organic Frameworks: A fundamental understanding
Elsaidi, S. K., Mohamed, M. H., Banerjee, D., & Thallapally, P. K. (2018) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2017.11.022 · Cited by 242
Dollimore, D., Spooner, P., & Turner, A. (1976) · Surface Technology · doi:10.1016/0376-4583(76)90024-8 · Cited by 235
Moreau, F., da Silva, I., Al Smail, N. H., Easun, T. L., Savage, M., Godfrey, H. G. W., Parker, S. F., Manuel, P., Yang, S., & Schröder, M. (2017) · Nature Communications · doi:10.1038/ncomms14085 · Cited by 235
He, T., Ni, B., Zhang, S., Gong, Y., Wang, H., Gu, L., Zhuang, J., Hu, W., & Wang, X. (2018) · Small · doi:10.1002/smll.201703929 · Cited by 231
Retrosynthesis of multi-component metal−organic frameworks
Yuan, S., Qin, J.-S., Li, J., Huang, L., Feng, L., Fang, Y., Lollar, C., Pang, J., Zhang, L., Sun, D., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03102-5 · Cited by 215
Principles and practice of heterogeneous catalysis
(2015) · Focus on Catalysts · doi:10.1016/s1351-4180(15)70037-1 · Cited by 205
Li, Y., Pang, A., Wang, C., & Wei, M. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12754c · Cited by 190
Luo, Y., Fan, S., Yu, W., Wu, Z., Cullen, D. A., Liang, C., Shi, J., & Su, C. (2018) · Advanced Materials · doi:10.1002/adma.201704576 · Cited by 190
Understanding Volumetric and Gravimetric Hydrogen Adsorption Trade-off in Metal–Organic Frameworks
Gómez-Gualdrón, D. A., Wang, T. C., García-Holley, P., Sawelewa, R. M., Argueta, E., Snurr, R. Q., Hupp, J. T., Yildirim, T., & Farha, O. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b01190 · Cited by 180
Kim, K. C., Yoon, T.-U., & Bae, Y.-S. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.01.003 · Cited by 177
Orellana-Tavra, C., Marshall, R. J., Baxter, E. F., Lázaro, I. A., Tao, A., Cheetham, A. K., Forgan, R. S., & Fairen-Jimenez, D. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb02025a · Cited by 172
Irreproducibility in hydrogen storage material research
Broom, D. P., & Hirscher, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01435f · Cited by 147
MOF Derived Nonstoichiometric NixCo3−xO4−y Nanocage for Superior Electrocatalytic Oxygen Evolution
Antony, R. P., Satpati, A. K., Bhattacharyya, K., & Jagatap, B. N. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201600632 · Cited by 131
Surface and Nanomolecular Catalysis
(2006) · CRC Press eBooks · doi:10.1201/9781420015751 · Cited by 127
Liu, X., Zhang, F., Goh, T. W., Li, Y., Shao, Y., Luo, L., Huang, W., Long, Y., Chou, L., & Tsung, C. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201711600 · Cited by 124
A comprehensive analysis of the BET area for nanoporous materials
Tian, Y., & Wu, J. (2017) · AIChE Journal · doi:10.1002/aic.15880 · Cited by 122
Zettlemoyer, A. C. (1977) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(77)90032-7 · Cited by 119
Dou, Y., Zhou, J., Zhou, A., Li, J., & Nie, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06443h · Cited by 117
Insight into seed-assisted template free synthesis of ZSM-5 zeolites
Nada, M. H., & Larsen, S. C. (2016) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2016.10.040 · Cited by 112
Witman, M. D., Ling, S., Gładysiak, A., Stylianou, K. C., Smit, B., Slater, B., & Harańczyk, M. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b10363 · Cited by 112
Das, A. K., Vemuri, R. S., Kutnyakov, I. V., McGrail, B. P., & Motkuri, R. K. (2016) · Scientific Reports · doi:10.1038/srep28050 · Cited by 108
Gu, S., He, J., Zhu, Y., Wang, Z., Chen, D., Yu, G., Pan, C., Guan, J., & Tao, K. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05170 · Cited by 103
Carbon Nanotubes in TiO2 Nanofiber Photoelectrodes for High‐Performance Perovskite Solar Cells
Batmunkh, M., Macdonald, T. J., Shearer, C. J., Bat‐Erdene, M., Wang, Y., Biggs, M. J., Parkin, I. P., Nann, T., & Shapter, J. G. (2017) · Advanced Science · doi:10.1002/advs.201600504 · Cited by 98
Self-citationA Stimuli‐Responsive Zirconium Metal–Organic Framework Based on Supermolecular Design
Krause, S., Bon, V., Stoeck, U., Senkovska, I., Többens, D. M., Wallacher, D., & Kaskel, S. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702357 · Cited by 90
Lyth, S. M., Ogura, T., Yamabe, J., Hayashi, A., Li, H.-W., & Sasaki, K. (2016) · Green energy and technology · doi:10.1007/978-4-431-56042-5 · Cited by 88
Racleş, C., Zaltariov, M., Iacob, M., Silion, M., Avădanei, M., & Bargan, A. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2016.12.034 · Cited by 73
The Assumptions of the B.E.T. Theory.
McMillan, W. G., & Teller, E. (1951) · The Journal of Physical Chemistry · doi:10.1021/j150484a003 · Cited by 72
Jurcic, M., Peveler, W. J., Savory, C. N., Scanlon, D. O., Kenyon, A. J., & Parkin, I. P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05638h · Cited by 72
Self-citationYot, P. G., Yang, K., Guillerm, V., Ragon, F., Dmitriev, V., Parisiades, P., Elkaïm, E., Devic, T., Horcajada, P., Serre, C., et al. (2016) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201600263 · Cited by 71
Exploring frontiers of high surface area metal–organic frameworks
Martin, R. L., & Harańczyk, M. (2013) · Chemical Science · doi:10.1039/c3sc00033h · Cited by 64
Gao, W., Zhou, T., Louis, B., & Wang, Q. (2017) · Catalysts · doi:10.3390/catal7040116 · Cited by 58
Li, Y., Zhao, L., Du, Z., Du, J., Wang, W., Wang, Y., Zhao, L., Cao, X., & Zhong, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta09976b · Cited by 51
BET specific surface area and pore structure of MOFs determined by hydrogen adsorption at 20 K
Streppel, B., & Hirscher, M. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01873b · Cited by 48
Meng, Z., Lu, R., Rao, D., Kan, E., Xiao, C., & Deng, K. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.140 · Cited by 48
Spanopoulos, I., Bratsos, I., Tampaxis, C., Vourloumis, D., Klontzas, E., Froudakis, G. E., Charalambopoulou, G., Steriotis, T., & Trikalitis, P. N. (2016) · Chemical Communications · doi:10.1039/c6cc04790d · Cited by 44
Effect of hierarchical porosity in Beta zeolites on the Beckmann rearrangement of oximes
Linares, M., Vargas, C., García, A., Ochoa‐Hernández, C., Čejka, J., García‐Muñoz, R. A., & Serrano, D. P. (2016) · Catalysis Science & Technology · doi:10.1039/c6cy01895e · Cited by 42
Homogenized electrospun nanofiber reinforced microporous polymer sponge
Kim, J. G., Choi, T. J., & Chang, J. Y. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.07.055 · Cited by 36
Trepte, K., Schaber, J., Schwalbe, S., Drache, F., Senkovska, I., Kaskel, S., Kortus, J., Brunner, E., & Seifert, G. (2017) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp00852j · Cited by 32
Cited by
Sinha, P., Datar, A., Jeong, C., Deng, X., Chung, Y. G., & Lin, L.-C. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.9b02116 · Cited by 360
Materials Informatics with PoreBlazer v4.0 and the CSD MOF Database
Sarkisov, L., Bueno-Perez, R., Sutharson, M., & Fairen-Jimenez, D. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c03575 · Cited by 352
How Reproducible are Surface Areas Calculated from the BET Equation?
Osterrieth, J. W. M., Rampersad, J., Madden, D., Rampal, N., Skoric, L., Connolly, B., Allendorf, M. D., Stavila, V., Snider, J. L., Ameloot, R., et al. (2022) · Advanced Materials · doi:10.1002/adma.202201502 · Cited by 315
Zhang, C., Ji, Y., Li, C., Zhang, Y., Sun, S., Xu, Y., Jiang, L., & Wu, C. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c00445 · Cited by 138
A review on the applicability of adsorption techniques for remediation of recalcitrant pesticides
Bose, S., Senthil Kumar, P., Rangasamy, G., Prasannamedha, G., & Kanmani, S. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2022.137481 · Cited by 72
Metadata
- Authors
- Ambroz, F., Macdonald, T. J., Martis, V., & Parkin, I. P.
- Venue
- Small Methods
- Publisher
- Wiley
- Published
- 2018-08-16
- Volume
- 2
- Issue
- 11
- ISSN
- 2366-9608 (ISSN-L)
- OpenAlex
- W2886243696
- Cited by
- 748
- References
- 105
- FWCI
- 8.67
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.