The Road to Bioabsorbable Stents: Reaching Clinical Reality?
The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Abstract
This article provides an overview of the evolution of revascularization devices since Grüntzig's initial introduction of balloon angioplasty in 1977. In-stent restenosis (ISR) is the major shortcoming of conventional (permanent-implant) stent therapy; even with the innovation and promising benefits of drug-eluting stents, management of ISR is very difficult. ISR is mainly caused by the interaction between the blood and the stent surface and a permanent mechanical irritation of the vascular tissue. Thus stenting technology has moved toward the development of temporary implants composed of biocompatible materials which mechanically support the vessel during the period of high risk for recoil and then completely biodegrade in the long term. Preclinical and first clinical experiences with bioabsorbable magnesium stents are discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Intravascular Stents to Prevent Occlusion and Re-Stenosis after Transluminal Angioplasty
Sigwart, U., Puel, J., Mirkovitch, V., Joffre, F., & Kappenberger, L. (1987) · New England Journal of Medicine · doi:10.1056/nejm198703193161201 · Cited by 1,892
Intracoronary Stenting Without Anticoagulation Accomplished With Intravascular Ultrasound Guidance
Colombo, A., Hall, P., Nakamura, S., Almagor, Y., Maiello, L., Martini, G., Gaglione, A., Goldberg, S. L., & Tobis, J. M. (1995) · Circulation · doi:10.1161/01.cir.91.6.1676 · Cited by 1,428
Angiographic Patterns of In-Stent Restenosis: Classification and Implications for Long-Term Outcome
Mehran, R., Dangas, G., Abizaid, A. S., Mintz, G. S., Lansky, A. J., Satler, L. F., Pichard, A. D., Kent, K. M., Stone, G. W., & Leon, M. B. (1999) · Circulation · doi:10.1161/01.cir.100.18.1872 · Cited by 1,258
Patterns and Mechanisms of In-Stent Restenosis: A Serial Intravascular Ultrasound Study
Hoffmann, R., Mintz, G. S., Dussaillant, G. R., Popma, J. J., Pichard, A. D., Satler, L. F., Kent, K. M., Griffin, J., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.6.1247 · Cited by 1,247
Catheter-Based Radiotherapy to Inhibit Restenosis after Coronary Stenting
Teirstein, P. S., Massullo, V., Jani, S., Popma, J. J., Mintz, G. S., Russo, R. J., Schatz, R. A., Guarneri, E. M., Steuterman, S., Morris, N. B., et al. (1997) · New England Journal of Medicine · doi:10.1056/nejm199706123362402 · Cited by 942
Arterial Remodeling After Coronary Angioplasty: A Serial Intravascular Ultrasound Study
Mintz, G. S., Popma, J. J., Pichard, A. D., Kent, K. M., Satler, L. F., Chiu Wong, S., Hong, M. K., Kovach, J. A., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.1.35 · Cited by 889
van der Giessen, W. J., Lincoff, A. M., Schwartz, R. S., van Beusekom, H. M. M., Serruys, P. W., Holmes, D. R., Ellis, S. G., & Topol, E. J. (1996) · Circulation · doi:10.1161/01.cir.94.7.1690 · Cited by 852
Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
Heublein, B., Rohde, R., Kaese, V, Niemeyer, M., Hartung, W., & Haverich, A. (2003) · Heart · doi:10.1136/heart.89.6.651 · Cited by 806
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
Textbook of interventional cardiology
Topol, E. J. (1994) · Cited by 710
Research works printed but not linked: 2
- Duda SH, Pusich B, Richter G, et al. (2002) Sirolimus-eluting stents for the treatment of obstructive superficial femoral arte\rventions in iliac and infrainguinal occlusive artery disease. J Interv Cardiol 17:427–435
- Sawyer P, Brattain W, Boddy P (1965) Electrochemical criteria in the choice of materials used in vascular prosthesis. In: Sawyer P (ed) Biophysical mechanism in vascular hemostasis and intravascular thrombosis. Appleton-Century-Crofts, New York, pp 337–348
Cited by
Items 101–200 of 276
Qian, J., Qin, H., Zeng, P., Hou, J., Mo, X., Shen, G., Zeng, H., Zhang, W., Chen, Y., & Wan, G. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.05.020 · Cited by 48
Dargusch, M. S., Venezuela, J., Dehghan‐Manshadi, A., Johnston, S., Yang, N., Mardon, K., Lau, C., & Allavena, R. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000667 · Cited by 48
A Critical Review of Biodegradable Zinc Alloys toward Clinical Applications
Rao, J., Gao, H., Sun, J., Yu, R., Zhao, D., & Ding, Y. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00210 · Cited by 48
Wang, B., Huang, P. J., Ou, C., Li, K., Yan, B., & Lü, W. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms141223614 · Cited by 47
Biodegradable magnesium coronary stents: material, design and fabrication
Demir, A. G., Previtali, B., Ge, Q., Vedani, M., Wu, W. G., Migliavacca, F., Petrini, L., Biffi, C. A., & Bestetti, M. (2013) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2013.834475 · Cited by 47
Nano-biomaterials for cardiovascular applications: Clinical perspective
Cicha, I., Singh, R., Garlichs, C. D., & Alexiou, C. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.03.015 · Cited by 48
The Prospects of Carrying and Releasing Drugs Via Biodegradable Magnesium Foam
Aghion, E., Yered, T., Perez, Y., & Gueta, Y. (2010) · Advanced Engineering Materials · doi:10.1002/adem.200980044 · Cited by 46
Formation and electrochemical behavior of Al and O plasma-implanted biodegradable Mg-Y-RE alloy
Zhao, Y., Wu, G., Pan, H., Yeung, K., & Chu, P. K.-H. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.11.028 · Cited by 46
The Functional Properties of Mg–Zn–X Biodegradable Magnesium Alloys
Мерсон, Д. Л., Brilevsky, A., Myagkikh, P. N., Tarkova, A. R., Prokhorikhin, A. A., Kretov, E. I., Frolova, T. S., & Vinogradov, A. (2020) · Materials · doi:10.3390/ma13030544 · Cited by 45
Short-term safety and efficacy of the biodegradable iron stent in mini-swine coronary arteries
Wu, C., Qiu, H., Hu, X., Ruan, Y.-M., Tian, Y., Chu, Y., Xu, X., Xu, L., Tang, Y., & Run-lin, G. A. O. (2013) · Chinese Medical Journal · doi:10.3760/cma.j.issn.0366-6999.20131120 · Cited by 43
Shi, Y., Jia, P., Zhang, L., Lee, B. K., Yun, Y., Zhang, J., Li, Z., Gu, S., Park, K., & Yuan, G. (2017) · Corrosion Science · doi:10.1016/j.corsci.2017.04.016 · Cited by 43
Corrosion and drug release properties of EN-plating/PLGA composite coating on MAO film
Lu, P., Liu, Y., Guo, M., Fang, H., & Xu, X. (2011) · Materials Science and Engineering C · doi:10.1016/j.msec.2011.04.005 · Cited by 42
Chichareon, P., Katagiri, Y., Asano, T., Takahashi, K., Kogame, N., Modolo, R., Tenekecioğlu, E., Chang, C., Tomaniak, M., Kukreja, N., et al. (2019) · Expert Review of Medical Devices · doi:10.1080/17434440.2019.1573142 · Cited by 41
Lindtner, R. A., Castellani, C., Tangl, S., Zanoni, G., Hausbrandt, P. A., Tschegg, E. K., Stanzl‐Tschegg, S. E., & Weinberg, A. (2013) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2013.08.008 · Cited by 41
Current Status and Outlook of Temporary Implants (Magnesium/Zinc) in Cardiovascular Applications
Prasadh, S., Raguraman, S., Wong, R. C. W., & Gupta, M. K. (2022) · Metals · doi:10.3390/met12060999 · Cited by 40
Chagnon, M., Guy, L.-G., & Jackson, N. D. (2019) · Toxicologic Pathology · doi:10.1177/0192623318816936 · Cited by 39
Degradable synthetische Implantatmaterialien: Klinische Applikationen und immunologische Aspekte
Witte, F., Calließ, T., & Windhagen, H. J. (2008) · Der Orthopäde · doi:10.1007/s00132-008-1193-9 · Cited by 39
Study on the biodegradability and biocompatibility of WE magnesium alloys
Wang, G., Ge, S., Shen, Y., Wang, H., Dong, Q., Zhang, Q., Gao, J., & Wang, Y. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.05.050 · Cited by 37
Grabow, N., Bünger, C. M., Sternberg, K., Mews, S., Schmohl, K., & Schmitz, K. (2006) · Journal of Medical Devices · doi:10.1115/1.2355683 · Cited by 37
Linderov, M., Brilevsky, A., Мерсон, Д. Л., Danyuk, A. V., & Vinogradov, A. (2022) · Materials · doi:10.3390/ma15020567 · Cited by 36
Development of high performance MgFe alloy as potential biodegradable materials
Xie, G., Takada, H., & Kanetaka, H. (2016) · Materials Science and Engineering A · doi:10.1016/j.msea.2016.06.051 · Cited by 36
In vitro and in vivo cytocompatibility evaluation of biodegradable magnesium-based stents: a review
Li, P., Zhou, N., Qiu, H., Maitz, M. F., Wang, J., & Huang, N. (2018) · Science China Materials · doi:10.1007/s40843-017-9194-y · Cited by 36
Infrapopliteal Stents: Overview and Unresolved Issues
Karnabatidis, D., Katsanos, K. H., & Siablis, D. (2009) · Journal of Endovascular Therapy · doi:10.1583/08-2593.1 · Cited by 34
Electrochemical Corrosion Behavior of as-cast Zn-rich Zn-Mg Alloys in a 0.06M NaCl Solution
Vida, T. A., Freitas, E. S., Cheung, N., Garcia, A., & Osório, W. R. (2017) · International Journal of Electrochemical Science · doi:10.20964/2017.06.37 · Cited by 34
Development and Future Trends of Protective Strategies for Magnesium Alloy Vascular Stents
Liu, D., Yang, K., & Chen, S. (2023) · Materials · doi:10.3390/ma17010068 · Cited by 34
A study of cytocompatibility and degradation of iron-based biodegradable materials
Oriňáková, R., Oriňák, A., Giretová, M., Medvecký, Ľ., Kupková, M., Hrubovčáková, M., Maskaľová, I., Macko, J., & Kaľavský, F. (2015) · Journal of Biomaterials Applications · doi:10.1177/0885328215615459 · Cited by 34
Jaguszewski, M. J., Ghadri, J. R., Zipponi, M., Bataiosu, R. D., Diekmann, J., Geyer, V., Neumann, C. A., Huber, M. A., Hagl, C. M., Erné, P., et al. (2014) · Clinical Research in Cardiology · doi:10.1007/s00392-014-0757-4 · Cited by 33
Cytotoxic Effects of Biodegradation of Pure Mg and MAO-Mg on Tumor Cells of MG63 and KB
Wang, Q., Jin, S., Lin, X. Y., Zhang, Y., Ren, L., & Yang, K. (2014) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2014.03.004 · Cited by 33
Moulton, S. E., Imisides, M. D., Shepherd, R., & Wallace, G. G. (2008) · Journal of Materials Chemistry · doi:10.1039/b805481a · Cited by 33
Meng, L., Liu, X., Liu, L., Hong, Q., Cheng, Y., Gao, F., Chen, J., Zhang, Q., & Pan, C. (2022) · Metals · doi:10.3390/met12101644 · Cited by 32
Frontiers for Bulk Nanostructured Metals in Biomedical Applications
Lowe, T. C., & Valiev, R. Z. (2014) · Wiley eBooks · doi:10.1002/9781118774052.ch1 · Cited by 32
Characterization of the protective layer formed on zinc in whole blood
Törne, K. B., Örnberg, A., & Weissenrieder, J. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.12.018 · Cited by 31
Debusschere, N., Segers, P., Dubruel, P., Verhegghe, B., & Beule, M. D. (2015) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1530-1 · Cited by 29
Li, H.-Z., Zhao, X., & Xu, J. Z. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.06.027 · Cited by 29
Role of Zinc in Enhancing the Corrosion Resistance of Mg-5Ca Alloys
Nam, N. Đ. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0281603jes · Cited by 29
Liu, L., Koo, Y., Collins, B., Xu, Z., Sankar, J., & Yun, Y. (2017) · PLoS ONE · doi:10.1371/journal.pone.0182914 · Cited by 28
Rare Earth Metals as Alloying Components in Magnesium Implants for Orthopaedic Applications
Angrisani, N., Seitz, J., Meyer‐Lindenberg, A., & Reifenrath, J. (2012) · InTech eBooks · doi:10.5772/48335 · Cited by 28
1.4.7 The baryon decuplet except (Omega-) (3/2+ states)
Das, D., Zhang, Z., Winkler, T., Mour, M., Günter, C. I., Morlock, M. M., Machens, H., & Schilling, A. F. (2005) · Advances in biochemical engineering, biotechnology · doi:10.1007/10201111_9 · Cited by 28
The influence of buffer system and biological fluids on the degradation of magnesium
Törne, K. B., Örnberg, A., & Weissenrieder, J. (2016) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33685 · Cited by 27
Frizziero, L., Santi, G. M., Leon-Cardenas, C., Ferretti, P., Sali, M., Gianese, F., Crescentini, N., Donnici, G., Liverani, A., Trisolino, G., et al. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb12040063 · Cited by 26
Expandable Mg-based Helical Stent Assessment using Static, Dynamic, and Porcine Ex Vivo Models
Koo, Y., Tiasha, T., Shanov, V. N., & Yun, Y. (2017) · Scientific Reports · doi:10.1038/s41598-017-01214-4 · Cited by 26
Shahar, I. A., Hosaka, T., Yoshihara, S., & MacDonald, B. (2017) · Procedia Engineering · doi:10.1016/j.proeng.2017.04.113 · Cited by 26
Srivastava, A., Ahuja, R., Bhati, P., Singh, S., Chauhan, P., Vashisth, P., Kumar, A., & Bhatnagar, N. (2020) · Materialia · doi:10.1016/j.mtla.2020.100661 · Cited by 25
Subramanian, A. K., Sivashanmugam, P., & Devarakonda, S. (2024) · World Journal of Dentistry · doi:10.5005/jp-journals-10015-2385 · Cited by 24
Bio-functionalization of micro-arc oxidized magnesium alloys via thiol-ene photochemistry
Chen, Y., Yan, G., Wang, X., Qian, H., Yi, J., Huang, L., & Liu, P. (2015) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2015.02.005 · Cited by 24
Physical and Chemical Stability of PLA in Food Packaging
Gerometta, M., Rocca-Smith, J. R., Domenek, S., & Karbowiak, T. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-100596-5.22471-2 · Cited by 24
OrbusNeich fully absorbable coronary stent platform incorporating dual partitioned coatings
Cottone, R., Thatcher, G. L., Parker, S., Hanks, L., Kujawa, D., Rowland, S., Costa, M. A., Schwartz, R. S., & Onuma, Y. (2009) · EuroIntervention · doi:10.4244/eijv5ifa11 · Cited by 24
FIB-TEM Study of Magnesium Corrosion Products after 14 Days in the Murine Artery
Bowen, P. K., McNamara, C. T., Mills, O. P., Drelich, J. W., & Goldman, J. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00044 · Cited by 24
Barungi, S., Hernández-Camarero, P., Terribas, G. M., Villalba-Montoro, R., Marchal, J. A., López‐Ruiz, E., & Perán, M. (2023) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2023.1148768 · Cited by 21
Niederlaender, J., Walter, M. J., Krajewski, S., Schweizer, E., Post, M., Schille, C., Geis‐Gerstorfer, J., & Wendel, H. P. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5119-7 · Cited by 21
The Mechanisms of Antibacterial Activity of Magnesium Alloys with Extreme Wettability
Emelyanenko, A. M., Domantovsky, A. G., Kaminsky, V. V., Пыцкий, И. С., Emelyanenko, K. A., & Boinovich, L. B. (2021) · Materials · doi:10.3390/ma14185454 · Cited by 21
The Development of Carotid Stent Material
He, D., Liu, W., & Zhang, T. (2014) · Interventional Neurology · doi:10.1159/000369480 · Cited by 20
A Review based on Biodegradable and Bioabsorbable Stents for Coronary Artery Disease
Alam, S. T., Ansari, A. Q., Urooj, S., & Aldobali, M. (2019) · Procedia Computer Science · doi:10.1016/j.procs.2019.05.006 · Cited by 20
Microscopic bio‐corrosion evaluations of magnesium surfaces in static and dynamic conditions
Bontrager, J. S., Mahapatro, A., & Gomes, A. S. (2014) · Journal of Microscopy · doi:10.1111/jmi.12142 · Cited by 19
Bioresorbable Materials and Their Application in Electronics
Huang, X. L. (2017) · Cambridge University Press eBooks · doi:10.1017/9781108290685 · Cited by 19
Degradable metallic biomaterials for cardiovascular applications
Sangeetha, K., Kumari, A. V. J., Venkatesan, J., Sukumaran, A., Aisverya, S., & Sudha, P. N. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102205-4.00013-1 · Cited by 19
Sun, J., Sun, K., Bai, K., Chen, S., Wang, F., Zhao, F., Hong, N., & Hu, H. (2019) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36682 · Cited by 19
Partially biodegradable Ti Mg composites prepared by microwave sintering for biomedical application
Lai, T., Xu, J. L., Huang, J., Wang, Q., Zhang, J. P., & Luo, J. (2022) · Materials Characterization · doi:10.1016/j.matchar.2022.111748 · Cited by 19
Surface Modification of Absorbable Magnesium Stents by Reactive Ion Etching
Galvin, E., Morshed, M. M., Cummins, C., Daniels, S. M., Lally, C., & MacDonald, B. (2013) · Plasma Chemistry and Plasma Processing · doi:10.1007/s11090-013-9477-1 · Cited by 19
Qi, L., Zhang, Z., Iqbal, M., Wang, F., Li, J., & Guan, S. (2025) · Rare Metals · doi:10.1007/s12598-024-03159-w · Cited by 18
Review on Zn-Based Alloys as Potential Biodegradable Medical Devices Materials
Dambatta, M. S., Kurniawan, D., Izman, S., Yahaya, B., & Hermawan, H. (2015) · Applied Mechanics and Materials · doi:10.4028/www.scientific.net/amm.776.277 · Cited by 18
Bioabsorbable Stent Quo Vadis: A Case for Nano-Theranostics
Gundogan, B., Tan, A., Farhatnia, Y., Alavijeh, M. S., Cui, Z., & Seifalian, A. M. (2014) · Theranostics · doi:10.7150/thno.8137 · Cited by 18
Yin, Z. (2017) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/553 · Cited by 18
Meng, L., Liu, X., Hong, Q., Ji, Y., Wang, L., Zhang, Q., Chen, J., & Pan, C. (2023) · Coatings · doi:10.3390/coatings13061079 · Cited by 17
Polymeric Biodegradable Stent Insertion in the Esophagus
Yang, K., Ling, C., Yuan, T., Zhu, Y., Cheng, Y.-S., & Cui, W. (2016) · Polymers · doi:10.3390/polym8050158 · Cited by 17
In Vitro Degradation and Cytotoxicity Evaluation of Iron Biomaterials with Hydroxyapatite Film
Oriňáková, R., Oriňák, A., Kupková, M., Hrubovčáková, M., Bučková, L. M., Giretová, M., Medvecky, B., Dobročka, E., Petruš, O., & Kaľavský, F. (2015) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)11084-4 · Cited by 17
Fabrication and Optimal Design of Biodegradable Polymeric Stents for Aneurysms Treatments
Han, X., Xia, W., Kelly, M., & Chen, D. (2017) · Journal of Functional Biomaterials · doi:10.3390/jfb8010008 · Cited by 16
Development and application of metal materials in terms of vascular stents
Wu, T., Chen, X., Fan, D.-Z., & Pang, X. (2015) · Bio-Medical Materials and Engineering · doi:10.3233/bme-151542 · Cited by 16
Zhao, F., Xue, W. L., Wang, F., Liu, L., Shi, H., & Wang, L. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.05.009 · Cited by 15
Bioceramic Coatings on Magnesium Alloys
Mahapatro, A., & Arshanapalli, S. A. (2017) · Journal of Bio- and Tribo-Corrosion · doi:10.1007/s40735-017-0099-7 · Cited by 14
An in vitro model for preclinical testing of thrombogenicity of resorbable metallic stents
Walker, E., Nauman, E. A., Allain, J. P., & Stanciu, L. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35348 · Cited by 14
Wang, C., Liu, Y., Xu, X., Zini, Y., Feng, B., Chen, Y., Chen, Y., Zhou, C., Ying, T., Yang, C., et al. (2026) · Corrosion Communications · doi:10.1016/j.corcom.2026.03.006 · Cited by 13
van Alst, M., Eenink, M. J. D., Kruft, M.-A. B., & van Tuil, R. (2009) · EuroIntervention · doi:10.4244/eijv5ifa4 · Cited by 13
Choudhary, L., Banerjee, P. C., Raman, R. K. S., Lobo, D. E., Easton, C. D., Majumder, M., Witte, F., & Löffler, J. F. (2024) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2023.12.012 · Cited by 13
Magnesium Alloys for Bioabsorbable Stents: A Feasibility Assessment
Deng, C. Z., Radhakrishnan, R., Larsen, S. R., Boismer, D. A., Stinson, J. S., Hotchkiss, A. K., Petersen, E. M., Weber, J., & Scheuermann, T. (2011) · Springer eBooks · doi:10.1007/978-3-319-48223-1_78 · Cited by 13
Youn, S. W., Kim, M. J., Yi, S., Ahn, H. J., Park, K. K., Lee, J., & Lee, Y. C. (2015) · Investigative Magnetic Resonance Imaging · doi:10.13104/imri.2015.19.2.76 · Cited by 13
Liu, S., Li, W., Li, Z. Y., Liu, H. R., Qiu, S., Yu, L., & Chen, M. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.11.287 · Cited by 12
Continuous Based Direct Ink Write for Tubular Cardiovascular Medical Devices
Casanova-Batlle, E., Guerra, A. J., & Ciurana, J. (2020) · Polymers · doi:10.3390/polym13010077 · Cited by 12
Cytocompatibility assessment of MgZnCa alloys
Smith, C. E., Xu, Z., Waterman, J. T., & Sankar, J. (2013) · Emerging Materials Research · doi:10.1680/emr.13.00026 · Cited by 12
Assessment of Biodegradable Magnesium Alloys for Enhanced Mechanical and Biocompatible Properties
Gill, P. (2012) · FIU - Digital Commons (Florida International University) · doi:10.25148/etd.fi12080610 · Cited by 8
Persaud-Sharma, D., Budiansky, N. D., & McGoron, A. J. (2012) · Metals · doi:10.3390/met3010023 · Cited by 11
A Review on Biodegradable and Bioabsorbable Stents for Coronary Artery Disease
Ramadugu, P., & Alikatte, K. L. (2016) · Journal of Bioequivalence & Bioavailability · doi:10.4172/jbb.1000269 · Cited by 11
An in vitro study on the biocompatibility of WE magnesium alloys
Ge, S., Wang, Y., Tian, J. M., Lei, D., Yu, Q., & Wang, G. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33388 · Cited by 11
Sun, J. P., Sun, K., Bai, K., Chen, S., Zhao, F., Wang, F., Hong, N., & Hu, H. (2020) · Biomaterials Science · doi:10.1039/d0bm00567c · Cited by 10
Zheng, Q., Sun, Z., Wang, Z., Duan, T., Xu, K., Cai, M., & Wang, B. (2021) · RSC Advances · doi:10.1039/d0ra09275d · Cited by 10
Channi, A. S., Bains, H. S., Grewal, J. S., Kumar, R., & Buddhi, D. (2022) · International Journal on Interactive Design and Manufacturing (IJIDeM) · doi:10.1007/s12008-022-01060-3 · Cited by 10
Min, D.-W., Kim, Y. H., Kwon, J., Kim, J.-K., Choi, C., Yun, E., Cha, C., Choi, S. H., Park, H. S., Lee, J. G., et al. (2025) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2025.07.007 · Cited by 9
Finite element analysis of stent expansion: Influence of stent geometry on performance parameters
Gomes, I. V., Puga, H., Alves, J. L., & Claro, J. C. P. (2017) · IEEE Portuguese Meeting on Bioengineering · doi:10.1109/enbeng.2017.7889433 · Cited by 9
Neutron and X‐Ray Techniques for Biological and Biomaterials Studies
Willumeit‐Römer, R. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201000326 · Cited by 10
Gassama, B., & Öteyaka, M. Ö. (2019) · Materials Testing · doi:10.3139/120.111420 · Cited by 9
Effects of Cu on the corrosion behavior and microstructure of Mg–Zn–Ca bulk metallic glass
Xu, S., Hu, Y. M., Yang, W., & Liu, B. (2021) · Materials and Corrosion · doi:10.1002/maco.202112415 · Cited by 9
Magnesium Alloys For Bioabsorbable Stents: A Feasibility Assessment
Deng, C. Z., Radhakrishnan, R., Larsen, S. R., Boismer, D. A., Stinson, J. S., Hotchkiss, A. K., Petersen, E. M., Weber, J., & Scheuermann, T. (2011) · Wiley eBooks · doi:10.1002/9781118062029.ch78 · Cited by 9
Feyerabend, F., Witte, F., Kammal, M., & Willumeit‐Römer, R. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.ft-272 · Cited by 9
Additive Manufacturing from a Biomedical Perspective
Pinto, B. M., Marques, M., Ferreira, I., Machado, M., Caldas, G. A. R., Belinha, J., Alves, J. L., & Jorge, R. N. (2019) · IEEE Portuguese Meeting on Bioengineering · doi:10.1109/enbeng.2019.8692538 · Cited by 8
Wolf, F., Feuchtner, G. M., Homolka, P., Langenberger, H., Stadler, A., Bader, T. R., Weber, M., Lämmer, J., & Loewe, C. (2007) · European Journal of Radiology · doi:10.1016/j.ejrad.2007.08.032 · Cited by 8
Fabrication and characterization of PLLA / PCL / Mg‐Zn‐Y alloy composite stent
Srivastava, A., Singh, S., Agrawal, M., Bhati, P., Kumari, N., Pandya, M., Vashisth, P., Chauhan, P., & Bhatnagar, N. (2023) · Polymer Engineering and Science · doi:10.1002/pen.26543 · Cited by 7
Liu, D., Yin, X., Pang, X., Hu, S., & Ding, Y. (2017) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-017-2850-0 · Cited by 6
Bioresorbable Scaffolds for Below-the-Knee Arterial Disease: A Literature Review of New Developments
Cui, H.-J., & Wu, Y. (2024) · Reviews in Cardiovascular Medicine · doi:10.31083/j.rcm2504133 · Cited by 6
3D Printing of Bioplastics for Medical Applications
Patel, P. K., Sonagara, C., Kumar, S., Meena, K., & Banerjee, S. S. (2025) · Polymer Engineering and Science · doi:10.1002/pen.27266 · Cited by 7
Metadata
- Authors
- Erne, P., Schier, M., & Resink, T. J.
- Affiliations
- Biotronik (Germany) (DE)
- Venue
- CardioVascular and Interventional Radiology
- Published
- 2005-09-29
- Volume
- 29
- Issue
- 1
- Pages
- 11-16
- ISSN
- 0174-1551 (ISSN-L)
- 1432-086X
- OpenAlex
- W1985328726
- Cited by
- 249
- References
- 59
- Citations by year
- 2026: 5 · 2025: 10 · 2024: 11 · 2023: 9 · 2022: 12 · 2021: 12 · 2020: 12 · 2019: 12 · 2018: 10 · 2017: 19 · 2016: 13 · 2015: 19 · 2014: 20 · 2013: 19 · 2012: 14
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- CardioVascular and Interventional Radiology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Coronary Interventions and Diagnostics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Cardiac Imaging and Diagnostics
- Keywords
- biodegradable stents, in-stent restenosis, drug-eluting stents, magnesium stents, coronary revascularization, balloon angioplasty, biodegradable implants, biomaterials, stent recoil, vascular injury
- MeSH terms
- Coronary Artery Disease, Humans, Iron, Magnesium, Polymers, Stents, Drug Delivery Systems, Absorbable Implants, Coronary Restenosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.