The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
The Road to Bioabsorbable Stents: Reaching Clinical Reality?
Abstract
This article provides an overview of the evolution of revascularization devices since Grüntzig's initial introduction of balloon angioplasty in 1977. In-stent restenosis (ISR) is the major shortcoming of conventional (permanent-implant) stent therapy; even with the innovation and promising benefits of drug-eluting stents, management of ISR is very difficult. ISR is mainly caused by the interaction between the blood and the stent surface and a permanent mechanical irritation of the vascular tissue. Thus stenting technology has moved toward the development of temporary implants composed of biocompatible materials which mechanically support the vessel during the period of high risk for recoil and then completely biodegrade in the long term. Preclinical and first clinical experiences with bioabsorbable magnesium stents are discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Intravascular Stents to Prevent Occlusion and Re-Stenosis after Transluminal Angioplasty
Sigwart, U., Puel, J., Mirkovitch, V., Joffre, F., & Kappenberger, L. (1987) · New England Journal of Medicine · doi:10.1056/nejm198703193161201 · Cited by 1,892
Intracoronary Stenting Without Anticoagulation Accomplished With Intravascular Ultrasound Guidance
Colombo, A., Hall, P., Nakamura, S., Almagor, Y., Maiello, L., Martini, G., Gaglione, A., Goldberg, S. L., & Tobis, J. M. (1995) · Circulation · doi:10.1161/01.cir.91.6.1676 · Cited by 1,428
Angiographic Patterns of In-Stent Restenosis: Classification and Implications for Long-Term Outcome
Mehran, R., Dangas, G., Abizaid, A. S., Mintz, G. S., Lansky, A. J., Satler, L. F., Pichard, A. D., Kent, K. M., Stone, G. W., & Leon, M. B. (1999) · Circulation · doi:10.1161/01.cir.100.18.1872 · Cited by 1,258
Patterns and Mechanisms of In-Stent Restenosis: A Serial Intravascular Ultrasound Study
Hoffmann, R., Mintz, G. S., Dussaillant, G. R., Popma, J. J., Pichard, A. D., Satler, L. F., Kent, K. M., Griffin, J., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.6.1247 · Cited by 1,247
Catheter-Based Radiotherapy to Inhibit Restenosis after Coronary Stenting
Teirstein, P. S., Massullo, V., Jani, S., Popma, J. J., Mintz, G. S., Russo, R. J., Schatz, R. A., Guarneri, E. M., Steuterman, S., Morris, N. B., et al. (1997) · New England Journal of Medicine · doi:10.1056/nejm199706123362402 · Cited by 942
Arterial Remodeling After Coronary Angioplasty: A Serial Intravascular Ultrasound Study
Mintz, G. S., Popma, J. J., Pichard, A. D., Kent, K. M., Satler, L. F., Chiu Wong, S., Hong, M. K., Kovach, J. A., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.1.35 · Cited by 889
van der Giessen, W. J., Lincoff, A. M., Schwartz, R. S., van Beusekom, H. M. M., Serruys, P. W., Holmes, D. R., Ellis, S. G., & Topol, E. J. (1996) · Circulation · doi:10.1161/01.cir.94.7.1690 · Cited by 852
Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
Heublein, B., Rohde, R., Kaese, V, Niemeyer, M., Hartung, W., & Haverich, A. (2003) · Heart · doi:10.1136/heart.89.6.651 · Cited by 806
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
Textbook of interventional cardiology
Topol, E. J. (1994) · Cited by 710
Research works printed but not linked: 2
- Duda SH, Pusich B, Richter G, et al. (2002) Sirolimus-eluting stents for the treatment of obstructive superficial femoral arte\rventions in iliac and infrainguinal occlusive artery disease. J Interv Cardiol 17:427–435
- Sawyer P, Brattain W, Boddy P (1965) Electrochemical criteria in the choice of materials used in vascular prosthesis. In: Sawyer P (ed) Biophysical mechanism in vascular hemostasis and intravascular thrombosis. Appleton-Century-Crofts, New York, pp 337–348
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants
Zberg, B., Uggowitzer, P. J., & Löffler, J. F. (2009) · Nature Materials · doi:10.1038/nmat2542 · Cited by 899
Progress and Challenge for Magnesium Alloys as Biomaterials
Zeng, R., Dietzel, W., Witte, F., Hort, N., & Blawert, C. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200800035 · Cited by 680
Rajeshkumar, G., Arvindh Seshadri, S., Devnani, G. L., Sanjay, M. R., Siengchin, S., Prakash Maran, J., Al-Dhabi, N. A., Karuppiah, P., Mariadhas, V. A., Sivarajasekar, N., et al. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.127483 · Cited by 640
Sankara Narayanan, T. S. N., Park, I. S., & Lee, M. H. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.08.002 · Cited by 639
Biodegradable Metals for Cardiovascular Stent Application: Interests and New Opportunities
Moravej, M., & Mantovani, D. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12074250 · Cited by 600
Feyerabend, F., Fischer, J., Holtz, J., Witte, F., Willumeit, R., Drücker, H., Vogt, C., & Hort, N. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.09.024 · Cited by 598
Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn‐Alloys
Bowen, P. K., Shearier, E. R., Zhao, S., Guillory, R. J., Zhao, F., Goldman, J., & Drelich, J. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501019 · Cited by 544
Improving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Biodegradable Mg and Mg alloys: Corrosion and biocompatibility
Virtanen, S. (2011) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2011.05.028 · Cited by 423
Biodegradable magnesium scaffolds: Part 1: Appropriate inflammatory response
Witte, F., Ulrich, H., Rudert, M., & Willbold, E. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31170 · Cited by 409
Liu, B., & Zheng, Y. F. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.11.001 · Cited by 396
Hänzi, A. C., Gerber, I., Schinhammer, M., Löffler, J. F., & Uggowitzer, P. J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.008 · Cited by 365
Bornapour, M., Muja, N., Shum-Tim, D., Cerruti, M., & Pekguleryuz, M. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.07.045 · Cited by 287
Magnesium Implants: Prospects and Challenges
Chakraborty Banerjee, P., Al-Saadi, S., Choudhary, L., Harandi, S. E., & Singh, R. (2019) · Materials · doi:10.3390/ma12010136 · Cited by 280
Bergström, J. S., & Hayman, D. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-015-1455-8 · Cited by 266
Jamesh, M., Kumar, S., & Sankara Narayanan, T. S. N. (2011) · Corrosion Science · doi:10.1016/j.corsci.2010.10.011 · Cited by 262
Ascencio, M., Pekguleryuz, M., & Omanovic, S. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.07.015 · Cited by 255
A fundamental review on composite materials and some of their applications in biomedical engineering
Egbo, M. K. (2021) · Journal of King Saud University - Engineering Sciences · doi:10.1016/j.jksues.2020.07.007 · Cited by 252
Zhao, S., Seitz, J.-M., Eifler, R., Maier, H. J., Guillory, R. J., Earley, E. J., Drelich, A., Goldman, J., & Drelich, J. W. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.167 · Cited by 251
The current trends of Mg alloys in biomedical applications—A review
Riaz, U., Shabib, I., & Haider, W. (2018) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.34290 · Cited by 213
Zhao, S., McNamara, C. T., Bowen, P. K., Verhun, N., Braykovich, J. P., Goldman, J., & Drelich, J. W. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3901-0 · Cited by 201
A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials
Pierson, D., Edick, J., Tauscher, A., Pokorney, E., Bowen, P., Gelbaugh, J., Stinson, J., Getty, H., Lee, C. H., Drelich, J., et al. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31922 · Cited by 195
Moravej, M., Prima, F., Fiset, M., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.010 · Cited by 194
Effect of surface pre-treatments on biocompatibility of magnesium
Lorenz, C., Brunner, J. G., Kollmannsberger, P., Jaafar, L., Fabry, B., & Virtanen, S. (2009) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.04.018 · Cited by 187
Dziuba, D., Meyer-Lindenberg, A., Seitz, J. M., Waizy, H., Angrisani, N., & Reifenrath, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.028 · Cited by 179
Recent advances in drug eluting stents
Puranik, A. S., Dawson, E. R., & Peppas, N. A. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2012.10.029 · Cited by 176
Advances in coatings on magnesium alloys for cardiovascular stents – A review
Zhang, Z.-Q., Yang, Y.-X., Li, J.-A., Zeng, R.-C., & Guan, S.-K. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.04.044 · Cited by 173
Continuum damage model for bioresorbable magnesium alloy devices — Application to coronary stents
Gastaldi, D., Sassi, V., Petrini, L., Vedani, M., Trasatti, S., & Migliavacca, F. (2011) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2010.11.003 · Cited by 173
Electrodeposition of hydroxyapatite coating on magnesium for biomedical applications
Jamesh, M.-I., Kumar, S., & Narayanan, T. S. N. S. (2011) · Journal of Coatings Technology and Research · doi:10.1007/s11998-011-9382-6 · Cited by 173
Bosiers, M., & On Behalf of the AMS INSIGHT Investigators (2008) · CardioVascular and Interventional Radiology · doi:10.1007/s00270-008-9472-8 · Cited by 173
Biomaterials in Cardiovascular Research: Applications and Clinical Implications
Jaganathan, S. K., Supriyanto, E., Murugesan, S., Balaji, A., & Asokan, M. K. (2014) · BioMed Research International · doi:10.1155/2014/459465 · Cited by 170
Biodegradable stents for coronary artery disease treatment: Recent advances and future perspectives
Hu, T., Yang, C., Lin, S., Yu, Q., & Wang, G. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.04.100 · Cited by 163
Wang, J., He, Y., Maitz, M. F., Collins, B., Xiong, K., Guo, L., Yun, Y., Wan, G., & Huang, N. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.041 · Cited by 160
Advances in the development of biodegradable coronary stents: A translational perspective
Zong, J., He, Q., Liu, Y., Qiu, M., Wu, J., & Hu, B. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100368 · Cited by 158
Additive Manufacturing of Biomaterials—Design Principles and Their Implementation
Mirzaali, M. J., Moosabeiki, V., Rajaai, S. M., Zhou, J., & ZADPOOR, A. A. (2022) · Materials · doi:10.3390/ma15155457 · Cited by 154
Recent Advances in Manufacturing Innovative Stents
Beshchasna, N., Saqib, M., Kraśkiewicz, H., Wasyluk, Ł., Kuzmin, O. S., Duta, O. C., Ficai, D., Ghizdavet, Z. D., Marin, A., Ficai, A., et al. (2020) · Pharmaceutics · doi:10.3390/pharmaceutics12040349 · Cited by 149
Biodegradable Mg corrosion and osteoblast cell culture studies
Yun, Y., Dong, Z., Yang, D., Schulz, M. J., Shanov, V. N., Yarmolenko, S. N., Xu, Z., Kumta, P. N., & Sfeir, C. S. (2009) · Materials Science and Engineering C · doi:10.1016/j.msec.2009.02.008 · Cited by 146
Magnesium-based implants: a mini-review
Luthringer-Feyerabend, B., Feyerabend, F., & Willumeit‐Römer, R. (2014) · Magnesium Research · doi:10.1684/mrh.2015.0375 · Cited by 143
On the cytocompatibility of biodegradable Fe-based alloys
Schinhammer, M., Gerber, I., Hänzi, A. C., & Uggowitzer, P. J. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.11.002 · Cited by 140
Lee, S. J., Jo, H. H., Lim, K. S., Lim, D., Lee, S., Lee, J. H., Kim, W. D., Jeong, M. H., Lim, J. Y., Kwon, I. K., et al. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122116 · Cited by 138
Biomaterials: A primer for surgeons
Binyamin, G. N., Shafi, B. M., & Mery, C. M. (2006) · Seminars in Pediatric Surgery · doi:10.1053/j.sempedsurg.2006.07.007 · Cited by 138
Mostaed, E., Vedani, M., Hashempour, M., & Bestetti, M. (2014) · Biomatter · doi:10.4161/biom.28283 · Cited by 116
Computational analysis of the radial mechanical performance of PLLA coronary artery stents
Pauck, R. G., & Reddy, B. D. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.09.014 · Cited by 112
Feyerabend, F., Witte, F., Kammal, M., & Willumeit‐Römer, R. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.3545 · Cited by 110
Lu, P., Cao, L., Liu, Y., Xu, X., & Wu, X. (2010) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31744 · Cited by 110
Zhang, Z., Jia, B., Yang, H., Yu, H., Wu, Q., Dai, K., & Zheng, Y. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.120905 · Cited by 108
Ahadi, F., Azadi, M., Biglari, M., Bodaghi, M., & Khaleghian, A. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e13575 · Cited by 105
Grabow, N., Bünger, C. M., Schultze, C., Schmohl, K., Martin, D. P., Williams, S. F., Sternberg, K., & Schmitz, K. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-007-9376-9 · Cited by 103
Rahim, M. I., Ullah, S., & Mueller, P. P. (2018) · Metals · doi:10.3390/met8070532 · Cited by 102
A review on design characteristics and fabrication methods of metallic cardiovascular stents
Korei, N., Solouk, A., Nazarpak, M. H., & Nouri, A. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103467 · Cited by 101
Fully Biodegradable Coronary Stents: Progress to Date
Ramcharitar, S., & Serruys, P. W. J. C. (2008) · American Journal of Cardiovascular Drugs · doi:10.2165/00129784-200808050-00003 · Cited by 101
A review of effective strides in amelioration of the biocompatibility of PEO coatings on Mg alloys
Fattah‐alhosseini, A., Chaharmahali, R., Babaei, K., Nouri, M., Keshavarz, M. K., & Kaseem, M. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.09.002 · Cited by 100
Materials and Manufacturing Technologies Available for Production of a Pediatric Bioabsorbable Stent
Alexy, R., & Levi, D. S. (2013) · BioMed Research International · doi:10.1155/2013/137985 · Cited by 99
Wittchow, E., Adden, N., Riedmüller, J., Savard, C., Waksman, R., & Braune, M. (2013) · EuroIntervention · doi:10.4244/eijv8i12a218 · Cited by 99
Electrochemical deposition of conducting polymer coatings on magnesium surfaces in ionic liquid
Luo, X., & Cui, X. T. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.006 · Cited by 98
Dargusch, M. S., Dehghan‐Manshadi, A., Shahbazi, M., Venezuela, J., Tran, X. Q., Song, J., Liu, N., Xu, C., Ye, Q., & Wen, C. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01497 · Cited by 97
In vitro degradation behavior of M1A magnesium alloy in protein-containing simulated body fluid
Wang, Y., Lim, C. S., Lim, C. V. S., Yong, M. S., Teo, E. K., & Moh, L. N. (2010) · Materials Science and Engineering C · doi:10.1016/j.msec.2010.11.017 · Cited by 94
Development of Degradable Fe-35Mn Alloy for Biomedical Application
Hermawan, H., Dube, D., & Mantovani, D. (2006) · Advanced materials research · doi:10.4028/www.scientific.net/amr.15-17.107 · Cited by 94
Lin, J., Tong, X., Wang, K., Shi, Z., Li, Y., Dargusch, M. S., & Wen, C. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.06.052 · Cited by 93
Effects of grain refinement on the biocorrosion and in vitro bioactivity of magnesium
Saha, P., Roy, M., Datta, M. K., Lee, B., & Kumta, P. N. (2015) · Materials Science and Engineering C · doi:10.1016/j.msec.2015.07.033 · Cited by 93
Tan, C. Y., Wen, C., & Ang, H. Q. (2024) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2023.12.008 · Cited by 92
Bioresorbable Metals for Biomedical Applications: From Mechanical Components to Electronic Devices
Ryu, H., Seo, M., & Rogers, J. A. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202002236 · Cited by 84
Ductile Biodegradable Mg‐Based Metallic Glasses with Excellent Biocompatibility
Yu, H., Wang, J., Shi, X., Louzguine, D. V., Wu, H., & Perepezko, J. H. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203738 · Cited by 84
Lu, P., Fan, H., Liu, Y., Cao, L., Wu, X., & Xu, X. (2010) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2010.10.038 · Cited by 83
Corrosion behaviour of biodegradable magnesium alloys with hydroxyapatite coatings
Dunne, C. F., Levy, G. K., Hakimi, O., Aghion, E., Twomey, B., & Stanton, K. T. (2016) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2016.01.045 · Cited by 80
Piro, B., Tran, H. V., & Thu, V. T. (2020) · Sensors · doi:10.3390/s20205898 · Cited by 78
Fabrication of a polymer-based biodegradable stent using a CO2 laser
Stepak, B. D., Antończak, A. J., Bartkowiak-Jowsa, M., Filipiak, J., Pezowicz, C. A., & Abramski, K. M. (2013) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2013.08.005 · Cited by 78
Huehnerschulte, T. A., Reifenrath, J., von Rechenberg, B., Dziuba, D., Seitz, J. M., Bormann, D., Windhagen, H. J., & Meyer‐Lindenberg, A. (2012) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-11-14 · Cited by 77
Xie, J., Zhang, T., Jiang, J., Xue, W., Wang, W., Ni, J., Zhang, X., & Liu, X. (2025) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2025.05.009 · Cited by 75
Moravej, M., Amira, S., Prima, F., Rahem, A., Fiset, M., & Mantovani, D. (2011) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.02.031 · Cited by 75
Biodegradable Mg-based alloys: biological implications and restorative opportunities
Lin, X. Y., Saijilafu, Wu, X., Wu, K., Chen, J., Tan, L., Witte, F., Yang, H., Mantovani, D., Zhou, H., et al. (2022) · International Materials Reviews · doi:10.1080/09506608.2022.2079367 · Cited by 74
Liu, P., Zhang, D., Dai, Y., Lin, J., Li, Y., & Wen, C. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.07.048 · Cited by 72
Huehnerschulte, T. A., Angrisani, N., Rittershaus, D., Bormann, D., Windhagen, H. J., & Meyer‐Lindenberg, A. (2011) · Materials · doi:10.3390/ma4061144 · Cited by 71
Mueller, P. P., Arnold, S., Badar, M., Bormann, D., Bach, F., Drynda, A., Meyer‐Lindenberg, A., Häuser, H., & Peuster, M. (2012) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34223 · Cited by 70
Absorbable polymer stent technologies for vascular regeneration
Grabow, N., Martin, D. P., Schmitz, K., & Sternberg, K. (2009) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.2282 · Cited by 69
Are there sufficient standards for the in vitro hemocompatibility testing of biomaterials?
Braune, S., Grunze, M., Straub, A., & Jung, F. (2013) · Biointerphases · doi:10.1186/1559-4106-8-33 · Cited by 68
Anticorrosion and cytocompatibility behavior of MAO/PLLA modified magnesium alloy WE42
Guo, M., Cao, L., Lu, P., Liu, Y., & Xu, X. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4354-z · Cited by 64
Johnston, S., Dargusch, M. S., & Atrens, A. (2017) · Science China Materials · doi:10.1007/s40843-017-9173-7 · Cited by 64
High Performance Fine-Grained Biodegradable Mg-Zn-Ca Alloys Processed by Severe Plastic Deformation
Vinogradov, A., Vasilev, E., Копылов, В. И., Linderov, M., Brilevsky, A., & Мерсон, Д. Л. (2019) · Metals · doi:10.3390/met9020186 · Cited by 64
A comparative study of powder metallurgical (PM) and wrought Fe–Mn–Si alloys
Xu, Z., Hodgson, M. A., & Cao, P. (2015) · Materials Science and Engineering A · doi:10.1016/j.msea.2015.02.021 · Cited by 62
Comparison of different in vitro tests for biocompatibility screening of Mg alloys
Scheideler, L., Füger, C., Schille, C., Rupp, F., Wendel, H. P., Hort, N., Reichel, H.-P., & Geis‐Gerstorfer, J. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.02.020 · Cited by 62
Сергеевич, Г. А., Mei, D., Lamaka, S. V., Sinebryukhov, S. L., Mashtalyar, D. V., Vyaliy, I. E., Zheludkevich, M. L., & Gnedenkov, S. V. (2020) · Corrosion Science · doi:10.1016/j.corsci.2020.108689 · Cited by 62
Lin, W., Zhang, G., Cao, P., Zhang, D., Zheng, Y., Wu, R., Qin, L., Wang, G., & Wen, T. (2014) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33246 · Cited by 60
Bünger, C. M., Grabow, N., Sternberg, K., Goosmann, M., Schmitz, K., Kreutzer, H. J., İnce, H., Kische, S., Nienaber, C. A., Martin, D. P., et al. (2007) · Journal of Endovascular Therapy · doi:10.1177/152660280701400518 · Cited by 60
Effect of PLLA coating on corrosion and biocompatibility of zinc in vascular environment
Shomali, A. A., Guillory, R. J., Seguin, D. J., Goldman, J., & Drelich, J. W. (2017) · Surface Innovations · doi:10.1680/jsuin.17.00011 · Cited by 59
Ion release from magnesium materials in physiological solutions under different oxygen tensions
Feyerabend, F., Drücker, H., Laipple, D., Vogt, C., Stekker, M., Hort, N., & Willumeit‐Römer, R. (2011) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-011-4490-5 · Cited by 54
Fibre Laser Cutting and Chemical Etching of AZ31 for Manufacturing Biodegradable Stents
Demir, A. G., Previtali, B., & Biffi, C. A. (2013) · Advances in Materials Science and Engineering · doi:10.1155/2013/692635 · Cited by 53
Bornapour, M., Mahjoubi, H., Vali, H., Shum‐Tim, D., Cerruti, M., & Pekguleryuz, M. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.04.108 · Cited by 53
Srivastava, A., Bhati, P., Singh, S., Agrawal, M., Kumari, N., Vashisth, P., Chauhan, P., & Bhatnagar, N. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26626 · Cited by 52
Brown, D. A., Lee, E. W., Loh, C. T., & Kee, S. T. (2009) · Journal of Vascular and Interventional Radiology · doi:10.1016/j.jvir.2008.11.007 · Cited by 52
Yasmin, F., Vafadar, A., & Tolouei‐Rad, M. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400210 · Cited by 51
Biodegradable zinc-based metallic materials: Mechanisms, properties, and applications
Yang, H., Huang, H., Li, S., Qin, Y., Wen, P., Qu, X., Jia, B., & Zheng, Y. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101584 · Cited by 51
Kitabata, H., Waksman, R., & Warnack, B. (2014) · Cardiovascular revascularization medicine · doi:10.1016/j.carrev.2014.01.011 · Cited by 51
Liu, D., Ding, Y., Guo, T., Qin, X., Guo, C. G., Yu, S.-C., & Lin, S. (2014) · Biomedical Materials · doi:10.1088/1748-6041/9/1/015014 · Cited by 51
Wang, J., Smith, C. E., Sankar, J., Yun, Y., & Huang, N. (2015) · Regenerative Biomaterials · doi:10.1093/rb/rbu015 · Cited by 50
Lewis, G. (2008) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.31028 · Cited by 50
Sui, T., Salvati, E., Zhang, H., Nyaza, K. V., Senatov, F. S., Salimon, A. I., & Korsunsky, A. M. (2018) · Journal of Advanced Research · doi:10.1016/j.jare.2018.11.002 · Cited by 49
Kieke, M., Feyerabend, F., Lemaître, J., Behrens, P. J., & Willumeit‐Römer, R. (2016) · BioNanoMaterials · doi:10.1515/bnm-2015-0020 · Cited by 49
Metadata
- Authors
- Erne, P., Schier, M., & Resink, T. J.
- Affiliations
- Biotronik (Germany) (DE)
- Venue
- CardioVascular and Interventional Radiology
- Published
- 2005-09-29
- Volume
- 29
- Issue
- 1
- Pages
- 11-16
- ISSN
- 0174-1551 (ISSN-L)
- 1432-086X
- OpenAlex
- W1985328726
- Cited by
- 249
- References
- 59
- Citations by year
- 2026: 5 · 2025: 10 · 2024: 11 · 2023: 9 · 2022: 12 · 2021: 12 · 2020: 12 · 2019: 12 · 2018: 10 · 2017: 19 · 2016: 13 · 2015: 19 · 2014: 20 · 2013: 19 · 2012: 14
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- CardioVascular and Interventional Radiology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Coronary Interventions and Diagnostics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Cardiac Imaging and Diagnostics
- Keywords
- biodegradable stents, in-stent restenosis, drug-eluting stents, magnesium stents, coronary revascularization, balloon angioplasty, biodegradable implants, biomaterials, stent recoil, vascular injury
- MeSH terms
- Coronary Artery Disease, Humans, Iron, Magnesium, Polymers, Stents, Drug Delivery Systems, Absorbable Implants, Coronary Restenosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.