The Road to Bioabsorbable Stents: Reaching Clinical Reality?
The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Abstract
This article provides an overview of the evolution of revascularization devices since Grüntzig's initial introduction of balloon angioplasty in 1977. In-stent restenosis (ISR) is the major shortcoming of conventional (permanent-implant) stent therapy; even with the innovation and promising benefits of drug-eluting stents, management of ISR is very difficult. ISR is mainly caused by the interaction between the blood and the stent surface and a permanent mechanical irritation of the vascular tissue. Thus stenting technology has moved toward the development of temporary implants composed of biocompatible materials which mechanically support the vessel during the period of high risk for recoil and then completely biodegrade in the long term. Preclinical and first clinical experiences with bioabsorbable magnesium stents are discussed.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Intravascular Stents to Prevent Occlusion and Re-Stenosis after Transluminal Angioplasty
Sigwart, U., Puel, J., Mirkovitch, V., Joffre, F., & Kappenberger, L. (1987) · New England Journal of Medicine · doi:10.1056/nejm198703193161201 · Cited by 1,892
Intracoronary Stenting Without Anticoagulation Accomplished With Intravascular Ultrasound Guidance
Colombo, A., Hall, P., Nakamura, S., Almagor, Y., Maiello, L., Martini, G., Gaglione, A., Goldberg, S. L., & Tobis, J. M. (1995) · Circulation · doi:10.1161/01.cir.91.6.1676 · Cited by 1,428
Angiographic Patterns of In-Stent Restenosis: Classification and Implications for Long-Term Outcome
Mehran, R., Dangas, G., Abizaid, A. S., Mintz, G. S., Lansky, A. J., Satler, L. F., Pichard, A. D., Kent, K. M., Stone, G. W., & Leon, M. B. (1999) · Circulation · doi:10.1161/01.cir.100.18.1872 · Cited by 1,258
Patterns and Mechanisms of In-Stent Restenosis: A Serial Intravascular Ultrasound Study
Hoffmann, R., Mintz, G. S., Dussaillant, G. R., Popma, J. J., Pichard, A. D., Satler, L. F., Kent, K. M., Griffin, J., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.6.1247 · Cited by 1,247
Catheter-Based Radiotherapy to Inhibit Restenosis after Coronary Stenting
Teirstein, P. S., Massullo, V., Jani, S., Popma, J. J., Mintz, G. S., Russo, R. J., Schatz, R. A., Guarneri, E. M., Steuterman, S., Morris, N. B., et al. (1997) · New England Journal of Medicine · doi:10.1056/nejm199706123362402 · Cited by 942
Arterial Remodeling After Coronary Angioplasty: A Serial Intravascular Ultrasound Study
Mintz, G. S., Popma, J. J., Pichard, A. D., Kent, K. M., Satler, L. F., Chiu Wong, S., Hong, M. K., Kovach, J. A., & Leon, M. B. (1996) · Circulation · doi:10.1161/01.cir.94.1.35 · Cited by 889
van der Giessen, W. J., Lincoff, A. M., Schwartz, R. S., van Beusekom, H. M. M., Serruys, P. W., Holmes, D. R., Ellis, S. G., & Topol, E. J. (1996) · Circulation · doi:10.1161/01.cir.94.7.1690 · Cited by 852
Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
Heublein, B., Rohde, R., Kaese, V, Niemeyer, M., Hartung, W., & Haverich, A. (2003) · Heart · doi:10.1136/heart.89.6.651 · Cited by 806
Initial and 6-Month Results of Biodegradable Poly- l -Lactic Acid Coronary Stents in Humans
Tamai, H., Igaki, K., Kyo, E., Kosuga, K., Kawashima, A., Matsui, S., Komori, H., Tsuji, T., Motohara, S., & Uehata, H. (2000) · Circulation · doi:10.1161/01.cir.102.4.399 · Cited by 806
Textbook of interventional cardiology
Topol, E. J. (1994) · Cited by 710
Research works printed but not linked: 2
- Duda SH, Pusich B, Richter G, et al. (2002) Sirolimus-eluting stents for the treatment of obstructive superficial femoral arte\rventions in iliac and infrainguinal occlusive artery disease. J Interv Cardiol 17:427–435
- Sawyer P, Brattain W, Boddy P (1965) Electrochemical criteria in the choice of materials used in vascular prosthesis. In: Sawyer P (ed) Biophysical mechanism in vascular hemostasis and intravascular thrombosis. Appleton-Century-Crofts, New York, pp 337–348
Cited by
Items 201–276 of 276
Cytocompatibility of magnesium alloys with adult human endothelial cells
Niederlaender, J., Rudi, P. G., Schweizer, E., Post, M., Schille, C., Krajewski, S., Wendel, H. P., & Geis‐Gerstorfer, J. (2013) · Emerging Materials Research · doi:10.1680/emr.13.00014 · Cited by 6
Biodegradable materials for medical applications
Stanciu, L., & Díaz‐Amaya, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-809263-7.00012-3 · Cited by 5
Potential of Biodegradable Stents in Congenital Heart Disease
Hatayama, N., Watanabe, T., Yuhara, S., Blais, B. A., Armstrong, A. K., & Shinoka, T. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00200-5 · Cited by 5
Bioabsorbable behaviour of magnesium alloys – an in vivo approach
Ďurišin, M. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-077-4.00004-8 · Cited by 5
MAGNESIUM-TITANIUM ALLOYS FOR BIOMEDICAL APPLICATIONS
Hoffmann, I. (2014) · UKnowledge (University of Kentucky) · Cited by 5
Love, B. J. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-809478-5.00013-4 · Cited by 5
Depukat, R., & Dudek, D. (2009) · Jagiellonian University Repository (Jagiellonian University) · Cited by 4
Corrosion behavior of MgZnFeCuCo alloys in the presence of coumarin
Thaha, Y. N., Kartika, I., Lestari, F. P., Syahid, A. N., Asmaria, T., Ashari, A. M., & Basuki, E. A. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102922 · Cited by 4
Corrosion control of magnesium for stent applications
Elmrabet, N. (2017) · Nottingham ePrints (University of Nottingham) · Cited by 4
Moravej, M. (2011) · Cited by 4
Ehterami, A., Motta, S. E., Generali, M., Coulter, F. B., Dreger, H., Falk, V., Hoerstrup, S. P., & Emmert, M. Y. (2026) · Nature Reviews Cardiology · doi:10.1038/s41569-026-01275-x · Cited by 3
Investigation of the cytotoxic effects of magnesium alloys on cell cultures
Frolova, T. S., Boykov, A., Tarkova, A. R., Orishchenko, К. E., Prokhorikhin, A. A., Malaev, D. U., Sinicyna, O., Baystrukov, V., Kretov, E. I., Pryamov, M., et al. (2019) · Patologiya krovoobrashcheniya i kardiokhirurgiya · doi:10.21688/1681-3472-2019-3-22-29 · Cited by 3
Schematic review of plasma arc oxidation process for Mg Alloy Bio Implants
Jadhav, P., Bongale, A. M., & Kumar, S. (2021) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1017/1/012011 · Cited by 3
A Review of Magnesium Alloys for Use in Biodegradable Cardiovascular Stents
Permana, K. D., Shuib, A. S., Ariwahjoedi, B., & Perak, M. (2013) · Cited by 3
Stents: Functions, Characteristics, and Materials
Tsuchiya, K., & Yamamoto, A. (2015) · Springer series in biomaterials science and engineering · doi:10.1007/978-3-662-46842-5_11 · Cited by 3
The controlled release of dexamethasone from polyterthiophene-based conducting polymers
Stevenson, G. (2010) · Research Online (University of Wollongong) · Cited by 3
Shomali, A. A. (2017) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/314 · Cited by 3
Characteristics and biocompatibility of magnesium-strontium (Mg-Sr) based alloys
Top, M. (2017) · eScholarship@McGill (McGill) · doi:10.82308/44336 · Cited by 3
Interdiffusion des Aluminium-Magnesium-Systems - Quantitative Analyse und numerische Modellierung
Seperant, F. (2012) · OPUS FAU (Kooperativer Bibliotheksverbund Berlin-Brandenburg (KOBV), on behalf of the Universitätsbibliothek Erlangen-Nürnberg) · Cited by 3
Li, H., Ma, L., & Li, Y. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb00111k · Cited by 2
Parametric Analysis and Optimization on Fiber Laser Micro-Milling on AZ31 Magnesium Alloy
Kibria, G., Aktar, M., Sekh, M., & Haque, R. (2024) · Journal of Advanced Manufacturing Systems · doi:10.1142/s0219686724500409 · Cited by 2
Advances in magnesium alloys and coatings for biomedical applications: A comprehensive review
Gholap, S. S., & Kale, K. B. (2024) · AIP conference proceedings · doi:10.1063/5.0216028 · Cited by 2
Metalik Biyo-Uyumlu Stentlerin Gelişim Süreci
İyibilgin, O., & Fındık, F. (2018) · Düzce Üniversitesi Bilim ve Teknoloji Dergisi · doi:10.29130/dubited.319891 · Cited by 2
Jiang, S., Ye, J., Wáng, H., Wang, J., Chen, S., Zhang, Y., Du, Q., Yang, L., Wang, L., & Sun, K. (2023) · Cardiology Discovery · doi:10.1097/cd9.0000000000000089 · Cited by 2
Temporäre Implantate für die endovaskuläre Applikation: Biodegradierbarer Polylactidstent
Bünger, C. M., Grabow, N., Sternberg, K., Ketner, L., Kröger, C., Goosmann, M., Kreutzer, H. J., Lorenzen, B., Hauenstein, K., Schmitz, K., et al. (2008) · Gefässchirurgie · doi:10.1007/s00772-008-0586-8 · Cited by 2
Thin hydroxyapatite coating on AZ91D magnesium alloy fabricated via RF-magnetron sputtering
Mukhametkaliyev, T. M., Surmeneva, M. A., Mueller, M., Prymak, O., Epple, M., & Анатольевич, С. Р. (2015) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/98/1/012027 · Cited by 2
Bioabsorbable Stents : Reaching Clinical Reality
Chowdhury, A. W. (2014) · Cardiovascular Journal · doi:10.3329/cardio.v6i2.18346 · Cited by 2
Leon-Cardenas, C., Ferretti, P., Sali, M., Santi, G. M., Gianese, F., Crescentini, N., Frizziero, L., Donnici, G., Liverani, A., Trisolino, G., et al. (2021) · International Conference on Industrial Engineering and Operations Management (IEOM) · doi:10.46254/eu04.20210391 · Cited by 1
Li, Z., Yu, L., Qiu, S., Zhou, B., Lyu, S., Li, W., & Chen, M. (2025) · Materialia · doi:10.1016/j.mtla.2025.102460 · Cited by 1
Mousavizadeh, S. M., Adelinia, A., Crowley, F. D., Zanjani, J. S. M., Mulvihill, J. J., Yu, M., Rezvani, E., Rooij, M. B. D., Gilchrist, M. D., & Zhang, N. (2025) · Advanced Engineering Materials · doi:10.1002/adem.202501354 · Cited by 1
Guo, X. (2012) · OhioLink ETD Center (Ohio Library and Information Network) · Cited by 1
Principles of Clinical and Engineering Integration in Hemocompatibility
Rosen, Y., & Elman, N. M. (2012) · CRC Press eBooks · doi:10.1201/b12303-6 · Cited by 1
Role of Magnesium on Mineralization and Periosteal Differentiation
Hong, D. (2019) · D-Scholarship@Pitt (University of Pittsburgh) · Cited by 1
Biomedical materials for cardiovascular stents
Al-Lamee, K. G., & Al-Lamee, R. K. (2014) · doi:10.4155/ebo.13.386 · Cited by 1
Aghion, E. (2018) · MDPI eBooks · doi:10.3390/books978-3-03897-387-4 · Cited by 1
Magnesium-Zinc-Calcium Alloys Suitable for Biomedical and Lightweight Electrical Applications
Zavala-Serrat, M., Genani, G., Flores, J. D., Kotiadis, S., & Elsayed, A. (2023) · Springer eBooks · doi:10.1007/978-3-031-38141-6_35 · Cited by 1
Design and Development of Polymeric Ink Material for a Solvent-Cast Direct-Write 3D Printer
Naim, W. N. W. A., Junid, R., Mokhtarudin, M. J. M., & Mohamed, N. A. N. (2024) · Lecture notes in bioengineering · doi:10.1007/978-981-97-1920-4_28 · Cited by 1
Hetterich, H. (2010) · Electronic Theses of LMU Munich (Ludwig-Maximilians-Universität München) · doi:10.5282/edoc.11611 · Cited by 1
Zhao, S. (2017) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/396 · Cited by 1
Corrosion Behaviour of a Biodegradable Rare-earth Magnesium Alloy in Modified Simulated Body Fluid
Imani, A. (2024) · cIRcle (University of British Columbia) · doi:10.26180/29818781 · Cited by 1
Oberflächenfunktionalisierung einer degradierbaren Magnesiumlegierung
Hausbeck, T. S. (2012) · OPUS FAU (Kooperativer Bibliotheksverbund Berlin-Brandenburg (KOBV), on behalf of the Universitätsbibliothek Erlangen-Nürnberg) · Cited by 1
An Assessment of Novel Biodegradable Magnesium Alloys for Endovascular Biomaterial Applications
Persaud-Sharma, D. (2013) · FIU - Digital Commons (Florida International University) · doi:10.25148/etd.fi13080712
BIOCORROSION RATE AND MECHANISM OF METALLIC MAGNESIUM IN MODEL ARTERIAL ENVIRONMENTS
Bowen, P. K. (2015) · Digital Commons - Michigan Tech (Michigan Technological University) · doi:10.37099/mtu.dc.etdr/7
München, K. D. L.-M.-U., & Reincke, M. (2010)
Designing Biomedical Stents for Vascular Therapy: Current Perspectives and Future Promises
Paul, A. (2014) · IGI Global eBooks · doi:10.4018/978-1-4666-5125-8.ch044
Pan, C., Hou, Y., Wang, Y.-N., Liu, T., Gong, T., Lin, Y., Wang, L., & Ye, W. (2016) · Bioinspired Biomimetic and Nanobiomaterials · doi:10.1680/jbibn.16.00027
Controlled release of an antiproliferative drug from coronary stents
Renke-Gluszko, M. (2008) · mediaTUM (Technical University of Munich)
Scalable Manufacturing of Metal Micro/Nanowires and Applications by Thermal Fiber Drawing Method
Hwang, I. (2017) · eScholarship (California Digital Library)
Bukała, J., Damaziak, K., Małąchowski, J., & Mazurkiewicz, Ł. (2018) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-97286-2_7
Micro and nano analysis of a novel polymeric bioresorbable scaffold and its drug release
Mahmood, T. (2018) · Nottingham ePrints (University of Nottingham)
Xu, L. (2019) · MACAU: Open Access Repository of Kiel University
Development of Investment Casting Method for Production of Metal Foams for Tissue Engineering
Womack, J. A. (2019) · UWM Digital Commons (University of Wisconsin–Milwaukee)
Magri, G. (2019) · Archivio Istituzionale della Ricerca (Universita Degli Studi Di Milano) · doi:10.13130/magri-giulia_phd2019-01-29
Tillmann, K. D. (2014) · OPUS FAU (Kooperativer Bibliotheksverbund Berlin-Brandenburg (KOBV), on behalf of the Universitätsbibliothek Erlangen-Nürnberg)
Polymers in Cardiovascular Implants
Bajpai, A., Bajpai, J., Saini, R. K., Agrawal, P., & Tiwari, A. K. (2016) · doi:10.1201/9781315371559-14
Polymers in Cardiovascular Implants
Bajpai, A. K., Bajpai, J., Saini, R. K., Agrawal, P., & Tiwari, A. (2016) · CRC Press eBooks · doi:10.1201/9781315371559-9
Environmental Infrastructure for Cardiac Health Care
Alam, M. S. T., Urooj, S., & Ansari, A. Q. (2020) · Lecture notes in civil engineering · doi:10.1007/978-981-15-2545-2_37
Designing Biomedical Stents for Vascular Therapy: Current Perspectives and Future Promises
Paul, A. (2012) · Advances in medical technologies and clinical practice book series · doi:10.4018/978-1-4666-2506-8.ch010
Principles of Clinical and Engineering Integration in Hemocompatibility
Elman, N. M. (2012) · CRC Press eBooks · doi:10.1201/b12303-3
Devarakonda, S., & Subramanian, A. K. (2025) · BULLETIN OF STOMATOLOGY AND MAXILLOFACIAL SURGERY · doi:10.58240/1829006x-2025.21.6-13
Imondi, C., Bartoli, M. E., Torroni, F., Faraci, S., Caldaro, T., Angelis, P. D., & Balassone, V. (2025) · World Journal of Gastrointestinal Endoscopy · doi:10.4253/wjge.v17.i8.104238
Kalb, H. (2012) · OPUS FAU (Kooperativer Bibliotheksverbund Berlin-Brandenburg (KOBV), on behalf of the Universitätsbibliothek Erlangen-Nürnberg)
Altevogt, J. A., Joner, M., & München, T. U. (2025) · mediaTUM (Technical University of Munich)
Subramanian, A. K., & Devarakonda, S. (2026) · Journal of Contemporary Orthodontics · doi:10.18231/j.jco.10084.1767255442
de Paula, M. P. M. (2024) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Biohajoavat metallistentit sepelvaltimoissa
Peromaa, S. (2025) · Tampere University Institutional Repository (Tampere University)
Modeling and numerical simulation for the planning of percutaneous transluminal angioplasty
Helou, B. (2021) · theses.fr (ABES) · doi:10.70675/d6ae8750z24bbz4c52z8b4dz1526f0544166
Today and the Future of Bioimplants
Sáez, J. S. D. R., Díaz, Á. G. D. L. C., Moraleda, L., Mora, M. V., & Sánchez, A. L. (2026) · Series in bioengineering · doi:10.1007/978-981-95-7557-2_8
Devarakonda, S., & Subramanian, A. K. (2026) · World Journal of Dentistry · doi:10.5005/jp-journals-10015-2737
Zhang, H., Chen, J., Shen, X., Han, J., Wang, B., Tan, X., An, Y., Ma, L., Luo, R., & Wang, Y. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag170
Production and investigation of biodegradable implant by powder metallurgy method
Demir, G. (2021) · Bilecik Şeyh Edebali University Institutional Repository
Xiao, Z. (2026) · International Conference on Biomedical and Intelligent Systems (IC-BIS) · doi:10.1145/3841905.3841990
Metadata
- Authors
- Erne, P., Schier, M., & Resink, T. J.
- Affiliations
- Biotronik (Germany) (DE)
- Venue
- CardioVascular and Interventional Radiology
- Published
- 2005-09-29
- Volume
- 29
- Issue
- 1
- Pages
- 11-16
- ISSN
- 0174-1551 (ISSN-L)
- 1432-086X
- OpenAlex
- W1985328726
- Cited by
- 249
- References
- 59
- Citations by year
- 2026: 5 · 2025: 10 · 2024: 11 · 2023: 9 · 2022: 12 · 2021: 12 · 2020: 12 · 2019: 12 · 2018: 10 · 2017: 19 · 2016: 13 · 2015: 19 · 2014: 20 · 2013: 19 · 2012: 14
- FWCI
- 5.71
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- CardioVascular and Interventional Radiology (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Coronary Interventions and Diagnostics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Cardiac Imaging and Diagnostics
- Keywords
- biodegradable stents, in-stent restenosis, drug-eluting stents, magnesium stents, coronary revascularization, balloon angioplasty, biodegradable implants, biomaterials, stent recoil, vascular injury
- MeSH terms
- Coronary Artery Disease, Humans, Iron, Magnesium, Polymers, Stents, Drug Delivery Systems, Absorbable Implants, Coronary Restenosis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.