The DOI matches its Crossref record; 101 of the 101 references it cites were found in a registry or an index.
Surface modification of biomaterials and biomedical devices using additive manufacturing
Open accessAbstract
The demand for synthetic biomaterials in medical devices, pharmaceutical products and, tissue replacement applications are growing steadily due to ageing population worldwide. The use for patient matched devices is also increasing due to availability and integration of new technologies. Applications of additive manufacturing (AM) or 3D printing (3DP) in biomaterials have also increased significantly over the past decade towards traditional as well as innovative next generation Class I, II and III devices. In this review, we have focused our attention towards the use of AM in surface modified biomaterials to enhance their in vitro and in vivo performances. Specifically, we have discussed the use of AM to deliberately modify the surfaces of different classes of biomaterials with spatial specificity in a single manufacturing process as well as commented on the future outlook towards surface modification using AM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Xia, Y., & Whitesides, G. M. (1998) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.28.1.153 · Cited by 4,611
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
A review on stereolithography and its applications in biomedical engineering
Melchels, F. P. W., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.050 · Cited by 2,457
PEEK biomaterials in trauma, orthopedic, and spinal implants
Kurtz, S. M., & Devine, J. N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.013 · Cited by 2,388
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Mediation of biomaterial-cell interactions by adsorbed proteins: a review
Wilson, C. J., Clegg, R. E., Leavesley, D. I., & Pearcy, M. J. (2005) · Tissue Engineering · doi:10.1089/ten.2005.11.1 · Cited by 1,696
Effects of synthetic micro- and nano-structured surfaces on cell behavior
Flemming, R. G., Murphy, C. J., Abrams, G. A., Goodman, S. L., & Nealey, P. F. (1999) · Biomaterials · doi:10.1016/s0142-9612(98)00209-9 · Cited by 1,450
Understanding and controlling the bone–implant interface
Puleo, D. (1999) · Biomaterials · doi:10.1016/s0142-9612(99)00160-x · Cited by 1,342
Role of material surfaces in regulating bone and cartilage cell response
Boyan, B. D., Hummert, T. W., Dean, D. D., & Schwartz, Z. (1996) · Biomaterials · doi:10.1016/0142-9612(96)85758-9 · Cited by 1,331
Scaffolds for tissue fabrication
Ma, P. X. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00233-0 · Cited by 1,077
Siow, K. S., Britcher, L., Kumar, S., & Griesser, H. J. (2006) · Plasma Processes and Polymers · doi:10.1002/ppap.200600021 · Cited by 972
Polymeric materials for bone and cartilage repair
Puppi, D., Chiellini, F., Piras, A. M., & Chiellini, E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.006 · Cited by 913
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
Self-citationMultiple Functionalities of Polyelectrolyte Multilayer Films: New Biomedical Applications
Boudou, T., Crouzier, T., Ren, K., Blin, G., & Picart, C. (2010) · Advanced Materials · doi:10.1002/adma.200901327 · Cited by 736
Human microvasculature fabrication using thermal inkjet printing technology
Cui, X., & Boland, T. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.07.056 · Cited by 704
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
Riemer, A., Leuders, S., Thöne, M., Richard, H. A., Tröster, T., & Niendorf, T. (2014) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2014.03.008 · Cited by 669
The role of macrophages in osteolysis of total joint replacement
Ingham, E., & Fisher, J. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.035 · Cited by 667
Song, S.-W., Hidajat, K., & Kawi, S. (2005) · Langmuir · doi:10.1021/la051167e · Cited by 659
Strengthening Alginate/Polyacrylamide Hydrogels Using Various Multivalent Cations
Yang, C. H., Wang, M. X., Haider, H., Yang, J. H., Sun, J.-Y., Chen, Y. M., Zhou, J., & Suo, Z. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403966x · Cited by 649
Nanopattern-induced changes in morphology and motility of smooth muscle cells
Yim, E. K. F., Reano, R. M., Pang, S. W., Yee, A. F., Chen, C. S., & Leong, K. W. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.01.058 · Cited by 628
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.09.028 · Cited by 606
Influence of engineered titania nanotubular surfaces on bone cells
Popat, K. C., Leoni, L., Grimes, C. A., & Desai, T. A. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.03.020 · Cited by 598
Medical device‐induced thrombosis: what causes it and how can we prevent it?
Jaffer, I. H., Fredenburgh, J. C., Hirsh, J., & Weitz, J. I. (2015) · Journal of Thrombosis and Haemostasis · doi:10.1111/jth.12961 · Cited by 557
Endothelial Progenitor Cell Capture by Stents Coated With Antibody Against CD34
Aoki, J., Serruys, P. W., van Beusekom, H., Ong, A. T. L., McFadden, E. P., Sianos, G., van der Giessen, W. J., Regar, E., de Feyter, P. J., Davis, H. R., et al. (2005) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2005.01.048 · Cited by 545
Understanding of dopant-induced osteogenesis and angiogenesis in calcium phosphate ceramics
Bose, S., Fielding, G., Tarafder, S., & Bandyopadhyay, A. (2013) · Trends in Biotechnology · doi:10.1016/j.tibtech.2013.06.005 · Cited by 536
Self-citationLim, J. Y., & Donahue, H. J. (2007) · Tissue Engineering · doi:10.1089/ten.2006.0154 · Cited by 534
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Effects of Defects in Laser Additive Manufactured Ti-6Al-4V on Fatigue Properties
Wycisk, E., Solbach, A., Siddique, S., Herzog, D., Walther, F., & Emmelmann, C. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.120 · Cited by 509
3D printing of tablets containing multiple drugs with defined release profiles
Khaled, S. A., Burley, J. C., Alexander, M. R., Yang, J., & Roberts, C. J. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.07.067 · Cited by 508
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494
Wei, J., Igarashi, T., Okumori, N., Igarashi, T., Maetani, T., Liu, B., & Yoshinari, M. (2009) · Biomedical Materials · doi:10.1088/1748-6041/4/4/045002 · Cited by 492
Hollander, D. A., von Walter, M., Wirtz, T., Sellei, R., Schmidt-Rohlfing, B., Paar, O., & Erli, H.-J. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2005.07.041 · Cited by 482
Tarafder, S., Balla, V. K., Davies, N. M., Bandyopadhyay, A., & Bose, S. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.555 · Cited by 364
Self-citationPatterning human stem cells and endothelial cells with laser printing for cardiac regeneration
Gaebel, R., Ma, N., Liu, J., Guan, J., Koch, L., Klopsch, C., Gruene, M., Toelk, A., Wang, W., Mark, P., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.08.071 · Cited by 351
Freeform inkjet printing of cellular structures with bifurcations
Christensen, K., Xu, C., Chai, W., Zhang, Z., Fu, J., & Huang, Y. (2015) · Biotechnology and Bioengineering · doi:10.1002/bit.25501 · Cited by 351
Microstructure and mechanical behavior of porous Ti–6Al–4V parts obtained by selective laser melting
Sallica-Leva, E., Jardini, A. L., & Fogagnolo, J. B. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2013.05.011 · Cited by 340
Bioprinting: inkjet printing proteins and hybrid cell-containing materials and structures
Derby, B. (2008) · Journal of Materials Chemistry · doi:10.1039/b807560c · Cited by 339
Additive Processing of Polymers
Wendel, B., Rietzel, D., Kühnlein, F., Feulner, R., Hülder, G., & Schmachtenberg, E. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800121 · Cited by 314
Review on powder-based electron beam additive manufacturing technology
Gong, X., Anderson, T., & Chou, K. (2014) · Manufacturing Review · doi:10.1051/mfreview/2014001 · Cited by 290
Toward 3D Printing of Pure Metals by Laser‐Induced Forward Transfer
Visser, C. W., Pohl, R., Sun, C., Römer, G., Huis in ‘t Veld, B., & Lohse, D. (2015) · Advanced Materials · doi:10.1002/adma.201501058 · Cited by 282
Roy, M., Bandyopadhyay, A. K., & Bose, S. (2010) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2010.10.042 · Cited by 262
Self-citationCurrent strategies towards hemocompatible coatings
Werner, C., Maitz, M. F., & Sperling, C. (2007) · Journal of Materials Chemistry · doi:10.1039/b703416b · Cited by 258
Jet‐based methods to print living cells
Ringeisen, B. R., Othon, C. M., Barron, J. A., Young, D., & Spargo, B. J. (2006) · Biotechnology Journal · doi:10.1002/biot.200600058 · Cited by 249
Inkjet printing of macromolecules on hydrogels to steer neural stem cell differentiation
Ilkhanizadeh, S., Teixeira, A. I., & Hermanson, O. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.05.018 · Cited by 246
Evolving the use of peptides as components of biomaterials
Collier, J. H., & Segura, T. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.02.030 · Cited by 238
An amperometric glucose biosensor prototype fabricated by thermal inkjet printing
Setti, L., Fraleoni-Morgera, A., Ballarin, B., Filippini, A., Frascaro, D., & Piana, C. (2005) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2004.09.022 · Cited by 231
The influence of biomaterials on endothelial cell thrombogenicity
McGuigan, A. P., & Sefton, M. V. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.01.039 · Cited by 229
Woo, K. M., Seo, J., Zhang, R., & Ma, P. X. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.02.004 · Cited by 218
Fielding, G., & Bose, S. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.07.009 · Cited by 211
Self-citationLi, Y., Yang, W., Li, X., Zhang, X., Wang, C., Meng, X., Pei, Y., Fan, X., Lan, P., Wang, C., et al. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00331 · Cited by 210
Wang, J. (1996) · Biomaterials · doi:10.1016/0142-9612(96)00072-5 · Cited by 210
Tarafder, S., & Bose, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501048n · Cited by 204
Self-citationEnhancement of in vitro osteogenesis on titanium by chemically produced nanotopography
de Oliveira, P. T., Zalzal, S. F., Beloti, M. M., Rosa, A. L., & Nanci, A. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30955 · Cited by 203
The Use of Micro- and Nanospheres as Functional Components for Bone Tissue Regeneration
Wang, H., Leeuwenburgh, S. C. G., Li, Y., & Jansen, J. A. (2012) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2011.0184 · Cited by 201
Roy, M., Fielding, G. A., Beyenal, H., Bandyopadhyay, A., & Bose, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201610q · Cited by 199
Self-citationEngineering materials layer‐by‐layer: Challenges and opportunities in multilayer assembly
Hammond, P. T. (2011) · AIChE Journal · doi:10.1002/aic.12769 · Cited by 199
Vahabzadeh, S., Roy, M., Bandyopadhyay, A., & Bose, S. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.022 · Cited by 198
Self-citationBandyopadhyay, A., Bose, S., & Das, S. (2015) · MRS Bulletin · doi:10.1557/mrs.2015.3 · Cited by 198
Self-citationTsai, W., Grunkemeier, J. M., McFarland, C. D., & Horbett, T. A. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10048 · Cited by 197
Shirota, T., He, H., Yasui, H., & Matsuda, T. (2003) · Tissue Engineering · doi:10.1089/107632703762687609 · Cited by 196
Central nervous system toxicity of metallic nanoparticles
Wei, L., shao, L., Feng, X., Chen, A., Zhang, Y., & Wang, J. (2015) · International Journal of Nanomedicine · doi:10.2147/ijn.s78308 · Cited by 184
Blindt, R., Vogt, F., Astafieva, I., Fach, C., Hristov, M., Krott, N., Seitz, B., Kapurniotu, A., Kwok, C., Dewor, M., et al. (2006) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2005.11.081 · Cited by 181
Migration, Particles, and Fluid Pressure: A Discussion of Causes of Prosthetic Loosening
Aspenberg, P., & der Vis, H. V. (1998) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199807000-00010 · Cited by 179
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Yu, D.-G., Branford-White, C., Ma, Z.-H., Zhu, L.-M., Li, X.-Y., & Yang, X.-L. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2008.12.008 · Cited by 170
Water, J. J., Bohr, A., Boetker, J., Aho, J., Sandler, N., Nielsen, H. M., & Rantanen, J. (2015) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.24305 · Cited by 159
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Attachment of glycosaminoglycans to collagenous matrices modulates the tissue response in rats
Pieper, J., van Wachem, P. B., van Luyn, M. J. A., Brouwer, L., Hafmans, T. G. M., Veerkamp, J. H., & Kuppevelt, T. H. V. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00052-1 · Cited by 157
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Feng, W., Zhu, S., Ishihara, K., & Brash, J. L. (2006) · Biointerphases · doi:10.1116/1.2187495 · Cited by 155
Shah, F. A., Omar, O., Suska, F., Snis, A., Matic, A., Emanuelsson, L., Norlindh, B., Lausmaa, J., Thomsen, P., & Palmquist, A. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.03.033 · Cited by 150
Zhu, M. C., Li, K., Zhu, Y., Zhang, J., & Ye, X. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.01.034 · Cited by 148
Bose, S., Tarafder, S., & Bandyopadhyay, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1646-y · Cited by 142
Self-citationPark, S. A., Lee, S. J., Lim, K. S., Bae, I., Lee, J. H., Kim, W. D., Jeong, M. H., & Park, J. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.11.119 · Cited by 138
Peptide and Protein Presenting Materials for Tissue Engineering
Hirano, Y., & Mooney, D. J. (2004) · Advanced Materials · doi:10.1002/adma.200300383 · Cited by 137
Fluid Pressure Causes Bone Resorption in a Rabbit Model of Prosthetic Loosening
van der Vis, H. M., Aspenberg, P., Marti, R. K., Tigchelaar, W., & Noorden, C. J. F. V. (1998) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-199805000-00028 · Cited by 128
Human Serum Albumin Adsorption on TiO2 from Single Protein Solutions and from Plasma
Sousa, S. R., Moradas‐Ferreira, P., Saramago, B., Melo, L. V., & Barbosa, M. A. (2004) · Langmuir · doi:10.1021/la049158d · Cited by 127
Skeletal stem cell physiology on functionally distinct titania nanotopographies
McNamara, L. E., Sjöström, T., Burgess, K. E., Kim, J. J., Liu, E., Gordonov, S., Moghe, P. V., Meek, R. M. D., Oreffo, R. O. C., Su, B., et al. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.063 · Cited by 124
Lee, K., Wang, S., Yaszemski, M. J., & Lu, L. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.030 · Cited by 121
Polyurethane-based scaffolds for myocardial tissue engineering
Chiono, V., Mozetic, P., Boffito, M., Sartori, S., Gioffredi, E., Silvestri, A., Rainer, A., Giannitelli, S. M., Trombetta, M., Nurzyńska, D., et al. (2013) · Interface Focus · doi:10.1098/rsfs.2013.0045 · Cited by 121
The antithrombotic and antimicrobial properties of PEG-protected silver nanoparticle coated surfaces
Unnithan, R. V. M., Unnikrishnan, S., Krishnan, V. K., & Krishnan, L. K. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.01.005 · Cited by 119
Biggs, M. J. P., Richards, R. G., Gadegaard, N., Wilkinson, C. D. W., & Dalby, M. J. (2006) · Journal of Orthopaedic Research® · doi:10.1002/jor.20319 · Cited by 119
Dixon, C., Ng, A. H. C., Fobel, R., Miltenburg, M. B., & Wheeler, A. R. (2016) · Lab on a Chip · doi:10.1039/c6lc01064d · Cited by 115
Gloria, A., Causa, F., Russo, T., Battista, E., Moglie, R. D., Zeppetelli, S., Santis, R. D., Netti, P. A., & Ambrosio, L. (2012) · Biomacromolecules · doi:10.1021/bm300818y · Cited by 102
Fraioli, R., Rechenmacher, F., Neubauer, S., Manero, J. M., Gil, J., Kessler, H., & Mas‐Moruno, C. (2015) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2014.12.057 · Cited by 101
Dawson, J. I., Wahl, D. A., Lanham, S. A., Kanczler, J. M., Czernuszka, J. T., & Oreffo, R. O. C. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.03.040 · Cited by 101
Schmidt, J., Sachs, M., Blümel, C., Winzer, B., Toni, F., Wirth, K., & Peukert, W. (2014) · Powder Technology · doi:10.1016/j.powtec.2014.04.003 · Cited by 100
In Vivo Response of Laser Processed Porous Titanium Implants for Load-Bearing Implants
Bandyopadhyay, A. K., Shivaram, A., Tarafder, S., Sahasrabudhe, H., Banerjee, D., & Bose, S. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1673-8 · Cited by 88
Self-citationCreation of a 3D printed temporal bone model from clinical CT data
Cohen, J., & Reyes, S. A. (2015) · American Journal of Otolaryngology · doi:10.1016/j.amjoto.2015.02.012 · Cited by 78
Chen, C. Y., Barron, J. A., & Ringeisen, B. R. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2005.11.088 · Cited by 75
Mevoy, A., Jeyam, M., Ferrier, G., Evans, C. E., & Andrew, J. G. (2002) · Bone · doi:10.1016/s8756-3282(01)00658-5 · Cited by 71
MgO-Doped Tantalum Coating on Ti: Microstructural Study and Biocompatibility Evaluation
Roy, M., Balla, V. K., Bandyopadhyay, A. K., & Bose, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201365e · Cited by 61
Self-citationThe nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR
Elfick, A. P. D., Green, S., Krikler, S., & Unsworth, A. (2003) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.10455 · Cited by 58
A hierarchically graded bioactive scaffold bonded to titanium substrates for attachment to bone
Fu, Q., Hong, Y., Liu, X., Fan, H., & Zhang, X. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.051 · Cited by 52
Lin, Q., Xu, X., Wang, B., Shen, C., Tang, J., Han, Y., & Chen, H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb00111k · Cited by 52
Direct Covalent Biomolecule Immobilization on Plasma-Nanotextured Chemically Stable Substrates
Tsougeni, K., Petrou, P. S., Awsiuk, K., Marzec, M. M., Ioannidis, N. E., Petrouleas, V., Tserepi, A. D., Kakabakos, S. E., & Gogolides, Ε. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01754 · Cited by 47
Deposition of Non-Fouling PEO-Like Coatings Using a Low Temperature Atmospheric Pressure Plasma Jet
Stallard, C. P., Solař, P., Biederman, H., & Dowling, D. P. (2015) · Plasma Processes and Polymers · doi:10.1002/ppap.201500034 · Cited by 22
Cited by
Svetlizky, D., Das, M., Zheng, B., Vyatskikh, A. L., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.020 · Cited by 1,371
Self-citationImproving biocompatibility for next generation of metallic implants
Bandyopadhyay, A., Mitra, I., Goodman, S. B., Kumar, M., & Bose, S. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101053 · Cited by 463
Self-citationRecent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
On the road to smart biomaterials for bone research: definitions, concepts, advances, and outlook
Montoya, C., Du, Y., Gianforcaro, A. L., Orrego, S., Yang, M., & Lelkes, P. I. (2021) · Bone Research · doi:10.1038/s41413-020-00131-z · Cited by 298
Stimuli-Responsive Materials for Tissue Engineering and Drug Delivery
Municoy, S., Álvarez Echazú, M. I., Antezana, P. E., Galdopórpora, J. M., Olivetti, C., Mebert, A. M., Foglia, M. L., Tuttolomondo, M. V., Alvarez, G. S., Hardy, J. G., et al. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21134724 · Cited by 289
Metadata
- Authors
- Bose, S., Robertson, S. F., & Bandyopadhyay, A.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-01
- Volume
- 66
- Pages
- 6-22
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2765656753
- Cited by
- 305
- References
- 101
- FWCI
- 12.08
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.