The DOI matches its Crossref record; 91 of the 91 references it cites were found in a registry or an index.
Zinc-based alloys for degradable vascular stent applications
Open accessAbstract
The search for biodegradable metals with mechanical properties equal or higher to those of currently used permanent biomaterials, such as stainless steels, cobalt chromium and titanium alloys, desirable in vivo degradation rate and uniform corrosion is still an open challenge. Magnesium (Mg), iron (Fe) and zinc (Zn)-based alloys have been proposed as biodegradable metals for medical applications. Over the last two decades, extensive research has been done on Mg and Fe. Fe-based alloys show appropriate mechanical properties, but their degradation rate is an order of magnitude below the benchmark value. In comparison, alongside the insufficient mechanical performance of most of its alloys, Mg degradation rate has proven to be too high in a physiological environment and corrosion is rarely uniform. During the last few years, Zn alloys have been explored by the biomedical community as potential materials for bioabsorbable vascular stents due to their tolerable corrosion rates and tunable mechanical properties. This review summarizes recent progress made in developing Zn alloys for vascular stenting application. Novel Zn alloys are discussed regarding their microstructural characteristics, mechanical properties, corrosion behavior and in vivo performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trumbo, P., Schlicker, S., Yates, A. A., & Poos, M. (2002) · Journal of the American Dietetic Association · doi:10.1016/s0002-8223(02)90346-9 · Cited by 5,993
Materials science and engineering: An introduction
Clayton, C. R. (1987) · Materials Science and Engineering · doi:10.1016/0025-5416(87)90343-0 · Cited by 5,925
Materials Science and Engineering: An Introduction
Callister, W. D. (1985) · Cited by 5,351
Zheng, Y. F., Gu, X. N., & Witte, F. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.01.001 · Cited by 2,436
Chen, Q., & Thouas, G. A. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.10.001 · Cited by 2,398
Silver as Antibacterial Agent: Ion, Nanoparticle, and Metal
Chernousova, S., & Epple, M. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201205923 · Cited by 2,264
Treatment of Infections Associated with Surgical Implants
Darouiche, R. O. (2004) · New England Journal of Medicine · doi:10.1056/nejmra035415 · Cited by 2,257
The development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593
Saris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366
Research on an Mg–Zn alloy as a degradable biomaterial
Zhang, S., Zhang, X., Zhao, C., Li, J., Song, Y., Xie, C., Tao, H., Zhang, Y., He, Y., Jiang, Y., et al. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.028 · Cited by 1,336
Trace elements in human physiology and pathology: zinc and metallothioneins
Tapiero, H., & Tew, K. D. (2003) · Biomedicine & Pharmacotherapy · doi:10.1016/s0753-3322(03)00081-7 · Cited by 1,298
Copper, oxidative stress, and human health
Uriu-Adams, J. Y., & Keen, C. L. (2005) · Molecular Aspects of Medicine · doi:10.1016/j.mam.2005.07.015 · Cited by 975
Zinc Exhibits Ideal Physiological Corrosion Behavior for Bioabsorbable Stents
Bowen, P. K., Drelich, J., & Goldman, J. (2013) · Advanced Materials · doi:10.1002/adma.201300226 · Cited by 928
Self-citationBiocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?
Heublein, B., Rohde, R., Kaese, V, Niemeyer, M., Hartung, W., & Haverich, A. (2003) · Heart · doi:10.1136/heart.89.6.651 · Cited by 806
Hambidge, M. (2000) · The Journal of Nutrition · doi:10.1093/jn/130.5.1344s · Cited by 773
Dietary copper and human health: Current evidence and unresolved issues
Bost, M., Houdart, S., Oberli, M., Kalonji, E., Huneau, J.-F., & Margaritis, I. (2016) · Journal of Trace Elements in Medicine and Biology · doi:10.1016/j.jtemb.2016.02.006 · Cited by 756
Vojtěch, D., Kubásek, J., Šerák, J., & Novák, P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.05.008 · Cited by 708
Late Angiographic Stent Thrombosis (LAST) Events With Drug-Eluting Stents
Ong, A. T. L., McFadden, E. P., Regar, E., de Jaegere, P. P. T., van Domburg, R. T., & Serruys, P. W. (2005) · Journal of the American College of Cardiology · doi:10.1016/j.jacc.2005.02.086 · Cited by 663
Developments in metallic biodegradable stents☆
Hermawan, H., Dubé, D., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.10.006 · Cited by 604
Incorporation and distribution of strontium in bone
Dahl, S. G., Allain, P., Marie, P. J., Mauras, Y., Boivin, G., Ammann, P., Tsouderos, Y., Delmas, P. D., & Christiansen, C. (2001) · Bone · doi:10.1016/s8756-3282(01)00419-7 · Cited by 590
Rink, L. (2000) · Proceedings of the Nutrition Society · doi:10.1017/s0029665100000781 · Cited by 581
Peuster, M., Wohlsein, P., Brügmann, M., Ehlerding, M., Seidler, K., Fink, C., Brauer, H., Fischer, A., & Hausdorf, G. (2001) · Heart · doi:10.1136/heart.86.5.563 · Cited by 569
Long-term biocompatibility of a corrodible peripheral iron stent in the porcine descending aorta
Peuster, M., Hesse, C., Schloo, T., Fink, C., Beerbaum, P., & von Schnakenburg, C. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.05.029 · Cited by 558
Toxicity of lithium to humans and the environment—A literature review
Aral, H., & Vecchio-Sadus, A. (2008) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2008.02.026 · Cited by 546
Biodegradable Metals for Cardiovascular Stents: from Clinical Concerns to Recent Zn‐Alloys
Bowen, P. K., Shearier, E. R., Zhao, S., Guillory, R. J., Zhao, F., Goldman, J., & Drelich, J. W. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201501019 · Cited by 544
Self-citationDing, Y., Wen, C., Hodgson, P., & Li, Y. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21746a · Cited by 531
Oral toxicity of silver ions, silver nanoparticles and colloidal silver – A review
Hadrup, N., & Lam, H. R. (2014) · Regulatory Toxicology and Pharmacology · doi:10.1016/j.yrtph.2013.11.002 · Cited by 530
Corrosion and electrochemistry of zinc
(1997) · Choice Reviews Online · doi:10.5860/choice.34-5118 · Cited by 525
Development of biodegradable Zn-1X binary alloys with nutrient alloying elements Mg, Ca and Sr
Li, H. F., Xie, X. H., Zheng, Y. F., Cong, Y., Zhou, F. Y., Qiu, K. J., Wang, X., Chen, S. H., Huang, L., Tian, L., et al. (2015) · Scientific Reports · doi:10.1038/srep10719 · Cited by 515
Kawahara, M., & Kato-Negishi, M. (2011) · International Journal of Alzheimer’s Disease · doi:10.4061/2011/276393 · Cited by 509
Nutrition in Bone Health Revisited: A Story Beyond Calcium
Ilich, J. Z., & Kerstetter, J. E. (2000) · Journal of the American College of Nutrition · doi:10.1080/07315724.2000.10718070 · Cited by 509
Wang, J., Witte, F., Xi, T., Zheng, Y., Yang, K., Yang, Y., Zhao, D., Meng, J., Li, Y., Li, W., et al. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.011 · Cited by 493
Mostaed, E., Sikora-Jasinska, M., Mostaed, A., Loffredo, S., Demir, A. G., Previtali, B., Mantovani, D., Beanland, R., & Vedani, M. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.03.018 · Cited by 475
Self-citationLi, L., Gao, J., & Wang, Y. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2004.01.004 · Cited by 441
Corrosion of, and cellular responses to Mg–Zn–Ca bulk metallic glasses
Gu, X., Zheng, Y., Zhong, S., Xi, T., Wang, J., & Wang, W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2009.11.015 · Cited by 413
Simchi, A., Tamjid, E., Pishbin, F., & Boccaccini, A. R. (2011) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2010.10.005 · Cited by 404
Yang, H., Wang, C., Liu, C., Chen, H., Wu, Y., Han, J., Jia, Z., Lin, W., Zhang, D., Li, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.08.022 · Cited by 399
Aluminium Toxicokinetics: An Updated MiniReview
Yokel, R. A., & McNamara, P. J. (2001) · Pharmacology and Toxicology · doi:10.1034/j.1600-0773.2001.d01-98.x · Cited by 373
Zeng, R.-C., Sun, L., Zheng, Y.-F., Cui, H.-Z., & Han, E.-H. (2014) · Corrosion Science · doi:10.1016/j.corsci.2013.10.028 · Cited by 369
Potential biodegradable Zn-Cu binary alloys developed for cardiovascular implant applications
Tang, Z., Niu, J., Huang, H., Zhang, H., Pei, J., Ou, J., & Yuan, G. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.05.013 · Cited by 361
Kubásek, J., Vojtěch, D., Jablonská, E., Pospíšilová, I., Lipov, J., & Ruml, T. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.08.015 · Cited by 360
COPPER AND ANGIOGENESIS: UNRAVELLING A RELATIONSHIP KEY TO CANCER PROGRESSION
Finney, L., Vogt, S., Fukai, T., & Glesne, D. (2009) · Clinical and Experimental Pharmacology and Physiology · doi:10.1111/j.1440-1681.2008.04969.x · Cited by 315
Li, H., Yang, H., Zheng, Y., Zhou, F., Qiu, K., & Wang, X. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.05.089 · Cited by 296
Micro-alloying with Mn in Zn–Mg alloy for future biodegradable metals application
Liu, X., Sun, J., Zhou, F., Yang, Y., Chang, R., Qiu, K., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials & Design · doi:10.1016/j.matdes.2015.12.128 · Cited by 292
Review of Lithium Effects on Brain and Blood
Young, W. (2009) · Cell Transplantation · doi:10.3727/096368909x471251 · Cited by 287
Research on a Zn-Cu alloy as a biodegradable material for potential vascular stents application
Niu, J., Tang, Z., Huang, H., Pei, J., Zhang, H., Yuan, G., & Ding, W. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.06.082 · Cited by 280
Endothelial Cellular Responses to Biodegradable Metal Zinc
Ma, J., Zhao, N., & Zhu, D. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00319 · Cited by 275
Novel high-strength, low-alloys Zn-Mg (< 0.1 wt% Mg) and their arterial biodegradation
Jin, H., Zhao, S., Guillory, R., Bowen, P. K., Yin, Z., Griebel, A., Schaffer, J., Earley, E. J., Goldman, J., & Drelich, J. W. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.11.021 · Cited by 271
Self-citationGong, H., Wang, K., Strich, R., & Zhou, J. G. (2015) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.33341 · Cited by 264
Metallic zinc exhibits optimal biocompatibility for bioabsorbable endovascular stents
Bowen, P. K., Guillory, R. J., Shearier, E. R., Seitz, J.-M., Drelich, J., Bocks, M., Zhao, F., & Goldman, J. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.07.022 · Cited by 261
Self-citationZhao, S., Seitz, J.-M., Eifler, R., Maier, H. J., Guillory, R. J., Earley, E. J., Drelich, A., Goldman, J., & Drelich, J. W. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.02.167 · Cited by 251
Self-citationAntibacterial biodegradable Mg-Ag alloys
Institute for Material Research, H.-Z. G., Tie, D., Feyerabend, F., Müller, W.-D., Schade, R., Liefeith, K., Kainer, K., & Willumeit, R. (2013) · European Cells and Materials · doi:10.22203/ecm.v025a20 · Cited by 250
Recent Advances in Biodegradable Metals for Medical Sutures: A Critical Review
Seitz, J., Durisin, M., Goldman, J., & Drelich, J. W. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500189 · Cited by 243
Self-citationLiu, X., Sun, J., Qiu, K., Yang, Y., Pu, Z., Li, L., & Zheng, Y. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.10.116 · Cited by 233
Tang, Z., Huang, H., Niu, J., Zhang, L., Zhang, H., Pei, J., Tan, J., & Yuan, G. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.12.075 · Cited by 230
Interactions between excessive manganese exposures and dietary iron-deficiency in neurodegeneration
Erikson, K. M., Syversen, T., Aschner, J. L., & Aschner, M. (2005) · Environmental Toxicology and Pharmacology · doi:10.1016/j.etap.2004.12.053 · Cited by 227
Zhu, D., Su, Y., Young, M. L., Ma, J., Zheng, Y., & Tang, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06654 · Cited by 227
Cytotoxicity evaluation of biodegradable Zn–3Mg alloy toward normal human osteoblast cells
Murni, N. S., Dambatta, M. S., Yeap, S. K., Froemming, G. R. A., & Hermawan, H. (2015) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.01.056 · Cited by 218
In Vitro Cytotoxicity, Adhesion, and Proliferation of Human Vascular Cells Exposed to Zinc
Shearier, E. R., Bowen, P. K., He, W., Drelich, A., Drelich, J., Goldman, J., & Zhao, F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00035 · Cited by 209
Self-citationZhao, S., McNamara, C. T., Bowen, P. K., Verhun, N., Braykovich, J. P., Goldman, J., & Drelich, J. W. (2017) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-016-3901-0 · Cited by 201
Self-citationBakhsheshi-Rad, H. R., Hamzah, E., Low, H. T., Kasiri-Asgarani, M., Farahany, S., Akbari, E., & Cho, M. H. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2016.11.138 · Cited by 198
A simplified in vivo approach for evaluating the bioabsorbable behavior of candidate stent materials
Pierson, D., Edick, J., Tauscher, A., Pokorney, E., Bowen, P., Gelbaugh, J., Stinson, J., Getty, H., Lee, C. H., Drelich, J., et al. (2012) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31922 · Cited by 195
Self-citationLong-term surveillance of zinc implant in murine artery: Surprisingly steady biocorrosion rate
Drelich, A. J., Zhao, S., Guillory, R. J., Drelich, J. W., & Goldman, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.05.045 · Cited by 188
Self-citationMoravej, M., Purnama, A., Fiset, M., Couet, J., & Mantovani, D. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.008 · Cited by 184
Effects of Mg on microstructure and corrosion properties of Zn–Mg alloy
Yao, C., Wang, Z., Tay, S. L., Zhu, T., & Gao, W. (2014) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.03.025 · Cited by 183
Liu, X., Sun, J., Yang, Y., Zhou, F., Pu, Z., Li, L., & Zheng, Y. (2016) · Materials Letters · doi:10.1016/j.matlet.2015.07.151 · Cited by 172
Im, S. H., Jung, Y., & Kim, S. H. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.019 · Cited by 171
A requirement for copper in angiogenesis
Harris, E. D. (2004) · Nutrition Reviews · doi:10.1111/j.1753-4887.2004.tb00025.x · Cited by 165
Shen, C., Liu, X., Fan, B., et al. (2016) · RSC Advances · doi:10.1039/c6ra14300h · Cited by 151
Bowen, P. K., Seitz, J., Guillory, R. J., Braykovich, J. P., Zhao, S., Goldman, J., & Drelich, J. W. (2017) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33850 · Cited by 139
Self-citationThe protective nature of passivation films on zinc: surface charge
Muster, T. H., & Cole, I. S. (2004) · Corrosion Science · doi:10.1016/j.corsci.2004.01.002 · Cited by 137
Degradation of zinc in saline solutions, plasma, and whole blood
Törne, K. B., Larsson, M., Norlin, A., & Weissenrieder, J. (2015) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.33458 · Cited by 134
‘Corrosion and electrochemistry of zinc’;
Porter, F. C. (1997) · British Corrosion Journal · doi:10.1179/000705997798115075 · Cited by 130
Wang, L., He, Y., Zhao, H., Xie, H., Li, S., Ren, Y., & Qin, G. W. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.01.059 · Cited by 108
In vitro investigation of ultra-pure Zn and its mini-tube as potential bioabsorbable stent material
Liu, X., Sun, J., Yang, Y., et al. (2015) · Materials Letters · doi:10.1016/j.matlet.2015.06.107 · Cited by 107
Microstructure, Mechanical Properties and Fracture Behavior of As-Extruded Zn–Mg Binary Alloys
Wang, L., Ren, Y., Sun, S., et al. (2017) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-017-0585-4 · Cited by 105
Grabow, N., Bünger, C. M., Schultze, C., Schmohl, K., Martin, D. P., Williams, S. F., Sternberg, K., & Schmitz, K. (2007) · Annals of Biomedical Engineering · doi:10.1007/s10439-007-9376-9 · Cited by 96
Guillory, R. J., Bowen, P. K., Hopkins, S. P., Shearier, E. R., Earley, E. J., Gillette, A. A., Aghion, E., Bocks, M. L., Drelich, J. W., & Goldman, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00591 · Cited by 92
Self-citationApelian, D., Paliwal, M., & Herrschaft, D. C. (1981) · JOM · doi:10.1007/bf03339527 · Cited by 81
Could chronic wounds not heal due to too low local copper levels?
Borkow, G., Gabbay, J., & Zatcoff, R. C. (2008) · Medical Hypotheses · doi:10.1016/j.mehy.2007.06.006 · Cited by 81
Zhang, L.-N., Hou, Z., Ye, X., Xu, Z., Bai, X., & Shang, P. (2013) · Frontiers of Materials Science · doi:10.1007/s11706-013-0210-z · Cited by 80
Copper deficiency and cardiovascular disease: role of peroxidation, glycation, and nitration
Saari, J. T. (2000) · Canadian Journal of Physiology and Pharmacology · doi:10.1139/cjpp-78-10-848 · Cited by 71
Influence of surface pre-treatment on the cytocompatibility of a novel biodegradable ZnMg alloy
Jablonská, E., Vojtěch, D., Roudnická, M., et al. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.114 · Cited by 70
Update on In-stent Restenosis.
El‐Omar, M., Dangas, G., Iakovou, I. P., & Mehran, R. (2001) · PubMed · Cited by 67
Dietary and Other Sources of Aluminium Intake
Greger, J. L. (2007) · Novartis Foundation symposium · doi:10.1002/9780470514306.ch3 · Cited by 65
Importance of oxide film in endovascular biodegradable zinc stents
Drelich, A. J., Bowen, P. K., LaLonde, L., Goldman, J., & Drelich, J. W. (2016) · Surface Innovations · doi:10.1680/jsuin.16.00014 · Cited by 59
Self-citationSilver as a Bactericidal Coating for Biomedical Implants
Fordham, W. R., Redmond, S., Westerland, A., Cortés, E., Walker, C., Gallagher, C. A., Medina, C. J., Waecther, F., Lunk, C., Ostrum, R. F., et al. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.05.013 · Cited by 57
Processing Aspects of Magnesium Alloy Stent Tube
Werkhoven, R. J., Sillekens, W. H., & van Lieshout, J. B. J. M. (2011) · doi:10.1002/9781118062029.ch79 · Cited by 47
Biosilver nanoparticle interface offers improved cell viability
VanOosten, S. K., Yuca, E., Karaca, B. T., Boone, K., Snead, M. L., Spencer, P., & Tamerler, C. (2016) · Surface Innovations · doi:10.1680/jsuin.16.00010 · Cited by 18
Ferner, R. E., Smith, J. M., & Koren, G. (1992) · The Lancet · doi:10.1016/0140-6736(92)90311-p · Cited by 16
Drelich, A. J., Miller, J., Donofrio, R. S., & Drelich, J. W. (2017) · Materials · doi:10.3390/ma10070775 · Cited by 12
Self-citation
Cited by
Design of biodegradable, implantable devices towards clinical translation
Li, C., Guo, C., Fitzpatrick, V., Ibrahim, A., Zwierstra, M. J., Hanna, P., Lechtig, A., Nazarian, A., Lin, S. J., & Kaplan, D. L. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0150-z · Cited by 808
Alloying design of biodegradable zinc as promising bone implants for load-bearing applications
Yang, H., Jia, B., Zhang, Z., Qu, X., Li, G., Lin, W., Zhu, D., Dai, K., & Zheng, Y. (2020) · Nature Communications · doi:10.1038/s41467-019-14153-7 · Cited by 756
Biodegradable Mg alloys for orthopedic implants – A review
Tsakiris, V., Tardei, C., & Clicinschi, F. M. (2021) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.06.024 · Cited by 612
Venezuela, J., & Dargusch, M. S. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.01.035 · Cited by 588
Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
Liu, Y., Zheng, Y., Chen, X., Yang, J., Pan, H., Chen, D., Wang, L., Zhang, J., Zhu, D., Wu, S., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805402 · Cited by 519
Metadata
- Authors
- Mostaed, E., Sikora-Jasinska, M., Drelich, J. W., & Vedani, M.
- Venue
- Acta Biomaterialia
- Publisher
- Elsevier BV
- Published
- 2018-04
- Volume
- 71
- Pages
- 1-23
- ISSN
- 1742-7061 (ISSN-L)
- OpenAlex
- W2790284808
- Cited by
- 565
- References
- 91
- FWCI
- 12.56
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.