CoChat

Discrimination of effects leading to gas formation during pulsed laser ablation in liquids

Kalus, Mark-Robert, Reimer, Viktor, Barcikowski, Stephan, Gökce, Bilal · 2019 · Applied Surface Science
Cited by 41

The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.

Abstract

Abstract Pulsed laser ablation of a bulk target in liquid induces the formation of cavitation bubbles and persistent gas bubbles, which both shield subsequent laser pulses leading to a decrease in nanoparticle productivity. A further shielding entity and a source for gas formation when post-irradiated are the synthesized nanoparticles. In this study, an experimental setup is developed, which allows quantitative measurement of the gas volume produced by these shielding entities. It can be shown that 1 cm3 gas is produced in 10 min ablation time when 8 W picosecond-laser power is applied. By a combined experimental and mathematical approach, the gas volumes induced by silver bulk ablation and post-irradiation effects of the produced colloids are discriminated. It is shown that a characteristic nanoparticle mass concentration threshold exists, where post-irradiation effects mostly dominate gas formation. In a synergistic process, the effective laser fluence available for bulk ablation decreases with increasing nanoparticle mass concentration and up to 80% of the laser power is coupled into the nanoparticles. At the same time, the interparticle distance between the nanoparticles decreases favoring the laser-induced breakdown of the liquid.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.apsusc.2018.09.224

Cites

17 of 17 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 42

  1. Zhu, 2013, Amplified spontaneous emission and lasing from lanthanide-doped up-conversion nanocrystals, ACS Nano, 7, 11420, 10.1021/nn405387t · DOI
  2. Lu, 2014, Tunable lifetime multiplexing using luminescent nanocrystals, Nat. Photon., 8, 32, 10.1038/nphoton.2013.322 · DOI · Paper page
  3. Tsunoyama, 2004, Colloidal gold nanoparticles as catalyst for carbon−carbon bond formation: application to aerobic homocoupling of phenylboronic acid in water, Langmuir, 20, 11293, 10.1021/la0478189 · DOI · Paper page
  4. Dreaden, 2012, The golden age: gold nanoparticles for biomedicine, Chem. Soc. Rev., 41, 2740, 10.1039/C1CS15237H · DOI · Paper page
  5. Idris, 2012, In vivo photodynamic therapy using upconversion nanoparticles as remote-controlled nanotransducers, Nat. Med., 18, 1580, 10.1038/nm.2933 · DOI · Paper page
  6. Lademann, 1999, Penetration of titanium dioxide microparticles in a sunscreen formulation into the horny layer and the follicular orifice, Skin Pharmacol. Appl. Skin Physiol., 12, 247, 10.1159/000066249 · DOI · Paper page
  7. Newman, 2009, The safety of nanosized particles in titanium dioxide– and zinc oxide–based sunscreens, J. Am. Acad. Dermatol., 61, 685, 10.1016/j.jaad.2009.02.051 · DOI · Paper page
  8. Riche, 2016, Flow invariant droplet formation for stable parallel microreactors, Nat. Commun., 7, 1, 10.1038/ncomms10780 · DOI · Paper page
  9. Zhang, 2013, Gold nanoparticle decorated ceria nanotubes with significantly high catalytic activity for the reduction of nitrophenol and mechanism study, Appl. Catal., B, 132, 107, 10.1016/j.apcatb.2012.11.030 · DOI · Paper page
  10. Mafuné, 2001, Formation of gold nanoparticles by laser ablation in aqueous solution of surfactant, J. Phys. Chem. B, 105, 5114, 10.1021/jp0037091 · DOI · Paper page
  11. Gökce, 2015, Ripening kinetics of laser-generated plasmonic nanoparticles in different solvents, Chem. Phys. Lett., 626, 96, 10.1016/j.cplett.2015.03.010 · DOI · Paper page
  12. Rehbock, 2014, Current state of laser synthesis of metal and alloy nanoparticles as ligand-free reference materials for nano-toxicological assays, Beilstein J. Nanotechnol., 5, 1523, 10.3762/bjnano.5.165 · DOI · Paper page
  13. Barcikowski, 2015, Solid solution magnetic FeNi nanostrand–polymer composites by connecting-coarsening assembly, J. Mater. Chem. C, 10699, 10.1039/C5TC02160J · DOI · Paper page
  14. Lam, 2014, γ-Al2O3 nanoparticles synthesised by pulsed laser ablation in liquids: a plasma analysis, PCCP, 16, 963, 10.1039/C3CP53748J · DOI · Paper page
  15. Petersen, 2009, Conjugation efficiency of laser-based bioconjugation of gold nanoparticles with nucleic acids, J. Phys. Chem. C, 113, 19830, 10.1021/jp905962f · DOI · Paper page
  16. Streich, 2015, Influence of ligands in metal nanoparticle electrophoresis for the fabrication of biofunctional coatings, Appl. Surf. Sci., 348, 92, 10.1016/j.apsusc.2014.12.159 · DOI
  17. Zhang, 2017, Colloidal metal nanoparticles prepared by laser ablation and their applications, ChemPhysChem, 18, 986, 10.1002/cphc.201601220 · DOI · Paper page
  18. Zhang, 2017, Recent advances in surfactant-free surface-charged, and defect-rich catalysts developed by laser ablation and processing in liquids, ChemNanoMat, 3, 512, 10.1002/cnma.201700079 · DOI · Paper page
  19. Davodi, 2018, Catalyst support effect on the activity and durability of magnetic nanoparticles as an advanced electrocatalyst for full water splitting, ACS Appl. Mater. Interfaces, 10.1021/acsami.8b08830 · DOI · Paper page
  20. Doñate-Buendía, 2018, Oxide dispersion-strengthened alloys generated by laser metal deposition of laser-generated nanoparticle-metal powder composites, Mater. Des., 154, 360, 10.1016/j.matdes.2018.05.044 · DOI · Paper page
  21. Hupfeld, 2018, A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering, Procedia CIRP, 74C, 244, 10.1016/j.procir.2018.08.103 · DOI · Paper page
  22. Streubel, 2016, Pilot-scale synthesis of metal nanoparticles by high-speed pulsed laser ablation in liquids, Nanotechnology, 27, 205602, 10.1088/0957-4484/27/20/205602 · DOI · Paper page
  23. Baladi, 2010, Investigation of different liquid media and ablation times on pulsed laser ablation synthesis of aluminum nanoparticles, Appl. Surf. Sci., 256, 7559, 10.1016/j.apsusc.2010.05.103 · DOI · Paper page
  24. Letzel, 2017, Size quenching during laser synthesis of colloids happens already in the vapor phase of the cavitation bubble, J. Phys. Chem. C, 121, 5356, 10.1021/acs.jpcc.6b12554 · DOI · Paper page
  25. Plech, 2004, Laser-induced heating and melting of gold nanoparticles studied by time-resolved x-ray scattering, Phys. Rev. B, 70, 195423, 10.1103/PhysRevB.70.195423 · DOI · Paper page
  26. Lombard, 2014, Kinetics of nanobubble generation around overheated nanoparticles, Phys. Rev. Lett., 112, 105701, 10.1103/PhysRevLett.112.105701 · DOI
  27. Akimoto, 2013, Hydrogen generation by laser irradiation of carbon powder in water, J. Phys. Chem. C, 117, 18281, 10.1021/jp4012558 · DOI
  28. Barmina, 2016, Hydrogen emission under laser exposure of colloidal solutions of nanoparticles, Chem. Phys. Lett., 655–656, 35, 10.1016/j.cplett.2016.05.020 · DOI · Paper page
  29. Barmina, 2017, Stable products of laser-induced breakdown of aqueous colloidal solutions of nanoparticles, JLMN, 12, 254
  30. Siems, 2011, Thermodynamics of nanosecond nanobubble formation at laser-excited metal nanoparticles, New J. Phys., 13, 043018, 10.1088/1367-2630/13/4/043018 · DOI · Paper page
  31. Maatz, 2000, Chemical and physical side effects at application of ultrashort laser pulses for intrastromal refractive surgery, J. Opt. A: Pure Appl. Opt., 2, 59, 10.1088/1464-4258/2/1/311 · DOI · Paper page
  32. Bauer, 2015, Heat accumulation in ultra-short pulsed scanning laser ablation of metals, Opt. Express, 23, 1035, 10.1364/OE.23.001035 · DOI · Paper page
  33. Luk’yanchuk, 2012, Paradoxes in laser heating of plasmonic nanoparticles, New J. Phys., 14, 093022, 10.1088/1367-2630/14/9/093022 · DOI
  34. Starinskiy, 2017, Laser-induced damage thresholds of gold, silver and their alloys in air and water, Appl. Surf. Sci., 396, 1765, 10.1016/j.apsusc.2016.11.221 · DOI
  35. Sakka, 2000, Laser ablation at solid–liquid interfaces: an approach from optical emission spectra, J. Chem. Phys., 112, 8645, 10.1063/1.481465 · DOI · Paper page
  36. Tamura, 2015, Simultaneous observation of nascent plasma and bubble induced by laser ablation in water with various pulse durations, J. Appl. Phys., 117, 173304, 10.1063/1.4919729 · DOI · Paper page
  37. Reich, 2017, Pulsed laser ablation in liquids: impact of the bubble dynamics on particle formation, J. Colloid Interface Sci., 489, 106, 10.1016/j.jcis.2016.08.030 · DOI · Paper page
  38. Ibrahimkutty, 2015, A hierarchical view on material formation during pulsed-laser synthesis of nanoparticles in liquid, Sci. Rep., 5, 16313, 10.1038/srep16313 · DOI · Paper page
  39. Plech, 2017, Thermal dynamics of pulsed-laser excited gold nanorods in suspension, Nanoscale, 9, 17284, 10.1039/C7NR06125K · DOI
  40. Hashimoto, 2012, Studies on the interaction of pulsed lasers with plasmonic gold nanoparticles toward light manipulation, heat management, and nanofabrication, J. Photochem. Photobiol, 13, 28, 10.1016/j.jphotochemrev.2012.01.001 · DOI · Paper page
  41. Metwally, 2015, Fluence threshold for photothermal bubble generation using plasmonic nanoparticles, J. Phys. Chem. C, 119, 28586, 10.1021/acs.jpcc.5b09903 · DOI · Paper page
  42. Nakajima, 2016, Observation of number-density-dependent growth of plasmonic nanobubbles, Sci. Rep., 6, 28667, 10.1038/srep28667 · DOI

Cited by

See all 41

Metadata

Authors
Kalus, M.-R., Reimer, V., Barcikowski, S., & Gökce, B.
Venue
Applied Surface Science
Publisher
Elsevier BV
Published
2019-01
Volume
465
Pages
1096-1102
ISSN
0169-4332 (ISSN-L)
OpenAlex
W2894280118
Cited by
41
References
17
FWCI
1.79
Type
journal article
Language
en
Open access
closed
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Funders
ZIM AIF (ZF4044504RE)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.