The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Additive manufacturing: Technology, applications, markets, and opportunities for the built environment
Open accessAbstract
Additive manufacturing (AM) technologies (also known as 3D printing - 3DP) have been rapidly advancing into various industrial sectors, including aerospace, automotive, medical, architecture, arts and design, food, and construction. Transitioning from the visualization and prototyping stages into functional and actual part replacement opens further design possibilities. Among the diverse applications of AM, construction applications have not yet seen a commercially available and widely used product in the market. Nevertheless, it has been a subject of interest to researchers in recent decades. There are evident challenges and risks for the integration of AM towards large-scale construction. Therefore, progress in their commercialization seems to proceed at a slow pace, as only a few 3DP trials for large-scale construction can be found in the literature. This paper aims to provide a comprehensive and evidence-based baseline along with progresses in relevant disciplines related to 3DP in construction, which will provide an opportunity to experts in all domains to understand the multi-dimensional constraints and to specify the future research directions in these sectors. The distinct merit of this article is that it provides, for the first time, a diverse review on literature in the field of construction 3D printing. It offers up-to-date and in-depth information of hindrances (from processes, materials, structural design and standards) which add up towards low pace of automation in construction sector, identify deficiencies in the current research and provides future research trends for researchers. The findings from intensive literature review will guide engineers, designers and investors from construction sector to grab research gaps and business opportunities. First of all, the development of different 3DP processes in built environment are presented to highlight the process constraints along with the commercial applications of these processes for industrialists and investors to identify the business opportunities. Secondly, process parameters and difficulties in optimization of material mixtures are presented as a guide to civil engineers following the discussion on materials urging the need for development of eco-efficient and environment friendly materials. Conclusions drawn from discussion in individual sections along with issues/constraints and challenges involved are explained separately.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
A review on basalt fibre and its composites
Fiore, V., Scalici, T., Di Bella, G., & Valenza, A. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2014.12.034 · Cited by 1,336
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Vision of 3D printing with concrete — Technical, economic and environmental potentials
De Schutter, G., Lesage, K., Mechtcherine, V., Nerella, V. N., Habert, G., & Agusti-Juan, I. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.06.001 · Cited by 1,072
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Functionally graded materials: A review of fabrication and properties
Naebe, M., & Shirvanimoghaddam, K. (2016) · Applied Materials Today · doi:10.1016/j.apmt.2016.10.001 · Cited by 986
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
3D printing trends in building and construction industry: a review
Tay, Y. W. D., Panda, B., Paul, S. C., Noor Mohamed, N. A., Tan, M. J., & Leong, K. F. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1326724 · Cited by 868
Buchanan, C., & Gardner, L. (2019) · Engineering Structures · doi:10.1016/j.engstruct.2018.11.045 · Cited by 826
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
A review of the use of recycled solid waste materials in asphalt pavements
Huang, Y. F., Bird, R. N., & Heidrich, O. (2007) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2007.02.002 · Cited by 757
Paolini, A., Kollmannsberger, S., & Rank, E. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.100894 · Cited by 673
Fresh and hardened properties of 3D printable cementitious materials for building and construction
Paul, S. C., Tay, Y. W. D., Panda, B., & Tan, M. J. (2018) · Archives of Civil and Mechanical Engineering · doi:10.1016/j.acme.2017.02.008 · Cited by 633
A review of the current progress and application of 3D printed concrete
Zhang, J., Wang, J., Dong, S., Yu, X., & Han, B. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105533 · Cited by 629
Ma, G., Li, Z., & Wang, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.051 · Cited by 616
Darko, A., Chan, A. P. C., Adabre, M. A., Edwards, D. J., Hosseini, M. R., & Ameyaw, E. E. (2020) · Automation in Construction · doi:10.1016/j.autcon.2020.103081 · Cited by 603
Mechtcherine, V., Bos, F. P., Perrot, A., da Silva, W. R. L., Nerella, V. N., Fataei, S., Wolfs, R. J. M., Sonebi, M., & Roussel, N. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106037 · Cited by 598
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Applications of additive manufacturing in the construction industry – A forward-looking review
Delgado Camacho, D., Clayton, P., O'Brien, W. J., Seepersad, C., Juenger, M., Ferron, R., & Salamone, S. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.12.031 · Cited by 538
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Additive manufacturing of geopolymer for sustainable built environment
Panda, B., Paul, S. C., Hui, L. J., Tay, Y. W. D., & Tan, M. J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.08.165 · Cited by 516
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Rakha, T., & Gorodetsky, A. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.002 · Cited by 470
Craveiro, F., Duarte, J. P., Bartolo, H., & Bartolo, P. J. (2019) · Automation in Construction · doi:10.1016/j.autcon.2019.03.011 · Cited by 455
Particle-bed 3D printing in concrete construction – Possibilities and challenges
Lowke, D., Dini, E., Perrot, A., Weger, D., Gehlen, C., & Dillenburger, B. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.018 · Cited by 447
Use of macro plastic fibres in concrete: A review
Yin, S., Tuladhar, R., Shi, F., Combe, M., Collister, T., & Sivakugan, N. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.105 · Cited by 417
3D printing of reinforced concrete elements: Technology and design approach
Asprone, D., Auricchio, F., Menna, C., & Mercuri, V. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.018 · Cited by 413
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Joe Lopes, A., MacDonald, E., & Wicker, R. B. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211212113 · Cited by 399
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Ghaffar, S. H., Corker, J., & Fan, M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.05.005 · Cited by 358
Exploratory investigation of solid freeform construction
Pegna, J. (1997) · Automation in Construction · doi:10.1016/s0926-5805(96)00166-5 · Cited by 355
On the emergence of 3D printable Engineered, Strain Hardening Cementitious Composites (ECC/SHCC)
Li, V. C., Bos, F. P., Yu, K., McGee, W., Ng, T. Y., Figueiredo, S. C., Nefs, K., Mechtcherine, V., Nerella, V. N., Pan, J., et al. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106038 · Cited by 342
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Panda, B., Lim, J. H., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.02.040 · Cited by 312
Lloret, E., Shahab, A. R., Linus, M., Flatt, R. J., Gramazio, F., Kohler, M., & Langenberg, S. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2014.02.011 · Cited by 311
Binder jetting of ceramics: Powders, binders, printing parameters, equipment, and post-treatment
Lv, X., Ye, F., Cheng, L., Fan, S., & Liu, Y. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.012 · Cited by 302
Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B. (2019) · Materials · doi:10.3390/ma12132149 · Cited by 301
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.06.013 · Cited by 288
A systematical review of 3D printable cementitious materials
Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.144 · Cited by 288
4D printing of materials for the future: Opportunities and challenges
Joshi, S., Rawat, K., C, K., Rajamohan, V., Mathew, A. T., Koziol, K., Kumar Thakur, V., & A.S.S, B. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100490 · Cited by 288
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Kellens, K., Mertens, R., Paraskevas, D., Dewulf, W., & Duflou, J. R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.153 · Cited by 282
Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Classification of building systems for concrete 3D printing
Duballet, R., Baverel, O., & Dirrenberger, J. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.018 · Cited by 238
Three-dimensional printing in the construction industry: A review
Perkins, I., & Skitmore, M. (2015) · International Journal of Construction Management · doi:10.1080/15623599.2015.1012136 · Cited by 225
Ductility of 3D printed concrete reinforced with short straight steel fibers
Bos, F. P., Bosco, E., & Salet, T. A. M. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1548069 · Cited by 222
Rane, K., & Strano, M. (2019) · Advances in Manufacturing · doi:10.1007/s40436-019-00253-6 · Cited by 219
An approach to develop printable strain hardening cementitious composites
Chaves Figueiredo, S., Romero Rodríguez, C., Ahmed, Z. Y., Bos, D. H., Xu, Y., Salet, T. M., Çopuroğlu, O., Schlangen, E., & Bos, F. P. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107651 · Cited by 211
Digital reproduction of historical building ornamental components: From 3D scanning to 3D printing
Xu, J., Ding, L., & Love, P. E. D. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.01.010 · Cited by 208
Experimental study of fibers in stabilizing and reinforcing asphalt binder
Chen, H., & Xu, Q. (2009) · Fuel · doi:10.1016/j.fuel.2009.08.020 · Cited by 202
A practical proposal for solving the world’s cigarette butt problem: Recycling in fired clay bricks
Mohajerani, A., Kadir, A. A., & Larobina, L. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.012 · Cited by 200
Cai, S., Ma, Z., Skibniewski, M. J., & Bao, S. (2019) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.100989 · Cited by 197
Multi-Material Additive Manufacturing of Sustainable Innovative Materials and Structures
Singh, R., Kumar, R., Farina, I., Colangelo, F., Feo, L., & Fraternali, F. (2019) · Polymers · doi:10.3390/polym11010062 · Cited by 194
Development of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107826 · Cited by 192
Additive manufacturing of cementitious composites: Materials, methods, potentials, and challenges
Hamidi, F., & Aslani, F. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.140 · Cited by 191
AIAA SPACE 2015 Conference and Exposition
(2015) · doi:10.2514/mspace15 · Cited by 184
Use of glass and nylon fibers in concrete for controlling early age micro cracking in bridge decks
Khan, M., & Ali, M. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.08.111 · Cited by 183
A robotic cell for performing sheet lamination-based additive manufacturing
Bhatt, P. M., Kabir, A. M., Peralta, M., Bruck, H. A., & Gupta, S. K. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.02.002 · Cited by 171
Optimal machine operation planning for construction by Contour Crafting
Zhang, J., & Khoshnevis, B. (2012) · Automation in Construction · doi:10.1016/j.autcon.2012.08.006 · Cited by 144
Amazing Types, Properties, and Applications of Fibres in Construction Materials
Mohajerani, A., Hui, S.-Q., Mirzababaei, M., Arulrajah, A., Horpibulsuk, S., Kadir, A. B. A., Rahman, M. T., & Maghool, F. (2019) · Materials · doi:10.3390/ma12162513 · Cited by 143
Robotic Fabrication in Architecture, Art and Design 2014
McGee, W., de Leon, M. P., Robeller, C., Nabaei, S. S., & Weinand, Y. (2014) · Springer eBooks · doi:10.1007/978-3-319-04663-1 · Cited by 141
Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Feasibility study for drone-based masonry construction of real-scale structures
Goessens, S., Mueller, C., & Latteur, P. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.06.015 · Cited by 131
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure
Costanzi, C. B., Ahmed, Z., Schipper, H. R., Bos, F. P., Knaack, U., & Wolfs, R. J. M. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.06.013 · Cited by 118
Construction by contour crafting using sulfur concrete with planetary applications
Khoshnevis, B., Yuan, X., Zahiri, B., Zhang, J., & Xia, B. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2015-0165 · Cited by 115
Weng, Y., Li, M., Liu, Z., Lao, W., Lu, B. H., Zhang, D., & Tan, M. J. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1555046 · Cited by 100
Physico-mechanical properties of asphalt concrete incorporated with encapsulated cigarette butts
Mohajerani, A., Tanriverdi, Y., Nguyen, B. T., Wong, K. K., Dissanayake, H. N., Johnson, L., Whitfield, D., Thomson, G., Alqattan, E., & Rezaei, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.07.091 · Cited by 99
Concrete Wall Fabrication by Contour Crafting
Hwang, D., & Khoshnevis, B. (2004) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2004/0057 · Cited by 98
Additive manufacturing for a Moon village
Labeaga-Martínez, N., Sanjurjo-Rivo, M., Díaz‐Álvarez, J., & Martínez‐Frías, J. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.09.186 · Cited by 95
Additive Manufacturing Processes for Infrastructure Construction: A Review
Bhardwaj, A., Jones, S. Z., Kalantar, N., Pei, Z., Vickers, J., Wangler, T. P., Zavattieri, P. D., & Zou, N. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4044106 · Cited by 76
Craveiro, F. G. D. S., Bártolo, H. M. C. D. R. T. G., Gale, A. W., Duarte, J. P., & Bártolo, P. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.05.006 · Cited by 69
Automated Construction Using Contour Crafting -- Applications on Earth and Beyond
Khoshnevis, B., & Bekey, G. A. (2002) · International Symposium on Automation and Robotics in Construction (ISARC) · doi:10.22260/isarc2002/0076 · Cited by 61
A new photopolymer extrusion 5-axis 3D printer
Asif, M. T., Lee, J. H., Lin-Yip, M. J., Chiang, S., Levaslot, A., Giffney, T., Ramezani, M., & Aw, K. C. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.026 · Cited by 57
Roadmap to sustainable plastic additive manufacturing
Kumar, S., & Czekanski, A. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.006 · Cited by 51
Advances in Contour Crafting Technology for Extraterrestrial Settlement Infrastructure Buildup
Khoshnevis, B., Thangavelu, M., Yuan, X., & Zhang, J. (2013) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2013-5438 · Cited by 44
Effects of orifice shape in contour crafting of ceramic materials
Kwon, H., Bukkapatnam, S., Khoshnevis, B., & Saito, J. (2002) · Rapid Prototyping Journal · doi:10.1108/13552540210430988 · Cited by 37
Space Truss Masonry Walls With Robotic Mortar Extrusion
Duballet, R., Baverel, O., & Dirrenberger, J. (2018) · Structures · doi:10.1016/j.istruc.2018.11.003 · Cited by 36
Keating, S. J., Spielberg, N. A., Klein, J., & Oxman, N. (2014) · Springer eBooks · doi:10.1007/978-3-319-04663-1_7 · Cited by 35
Felbrich, B., Wulle, F., Allgaier, C., Menges, A., Verl, A. W., Wurst, K.-H., & Nebelsick, J. H. (2018) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/aaa50d · Cited by 23
Additive Manufacturing Processes for Infrastructure Construction: A Review
Bhardwaj, A., Jones, S. Z., Kalantar, N., Pei, Z., Vickers, J., Wangler, T. P., Zavattieri, P. D., & Zou, N. (2019) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2019-2988 · Cited by 18
Deformation Analysis of Sulfur Concrete Structures Made by Contour Crafting
Khoshnevis, B., Xiao, Y. U. A. N., Zahiri, B., Zhang, J., & Xia, B. (2015) · AIAA SPACE Conference & Exposition · doi:10.2514/6.2015-4452 · Cited by 16
Toward Total Automation of On-Site Construction - An Integrated Approach Based on Contour Crafting
Khoshnevis, B. (2003) · Proceedings of the ... ISARC · doi:10.22260/isarc2003/0001 · Cited by 15
Cited by
Vat photopolymerization of polymers and polymer composites: Processes and applications
Al Rashid, A., Ahmed, W., Khalid, M. Y., & Koç, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 326
Self-citationRecent advancements of robotics in construction
Xiao, B., Chen, C., & Yin, X. (2022) · Automation in Construction · doi:10.1016/j.autcon.2022.104591 · Cited by 204
Additive Manufacturing of Carbon Using Commodity Polypropylene
Smith, P., Obando, A. G., Griffin, A., Robertson, M., Bounds, E., & Qiang, Z. (2023) · Advanced Materials · doi:10.1002/adma.202208029 · Cited by 42
Metadata
- Authors
- Al Rashid, A., Khan, S. A., G. Al-Ghamdi, S., & Koç, M.
- Venue
- Automation in Construction
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 118
- Pages
- 103268
- ISSN
- 0926-5805 (ISSN-L)
- OpenAlex
- W3037610145
- Cited by
- 257
- References
- 94
- FWCI
- 15.36
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.