Three dimensional electrospun PCL/PLA blend nanofibrous scaffolds with significantly improved stem cells osteogenic differentiation and cranial bone formation
Open accessThe DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index.
Abstract
Nanofibrous scaffolds that are morphologically/structurally similar to natural ECM are highly interested for tissue engineering; however, the electrospinning technique has the difficulty in directly producing clinically relevant 3D nanofibrous scaffolds with desired structural properties. To address this challenge, we have developed an innovative technique of thermally induced nanofiber self-agglomeration (TISA) recently. The aim of this work was to prepare (via the TISA technique) and evaluate 3D electrospun PCL/PLA blend (mass ratio: 4/1) nanofibrous scaffolds having high porosity of ~95.8% as well as interconnected and hierarchically structured pores with sizes from sub-micrometers to ~300 µm for bone tissue engineering. The hypothesis was that the incorporation of PLA (with higher mechanical stiffness/modulus and bioactivity) into PCL nanofibers would significantly improve human mesenchymal stem cells (hMSCs) osteogenic differentiation in vitro and bone formation in vivo. Compared to neat PCL-3D scaffolds, PCL/PLA-3D blend scaffolds had higher mechanical properties and in vitro bioactivity; as a result, they not only enhanced the cell viability of hMSCs but also promoted the osteogenic differentiation. Furthermore, our in vivo studies revealed that PCL/PLA-3D scaffolds considerably facilitated new bone formation in a critical-sized cranial bone defect mouse model. In summary, both in vitro and in vivo results indicated that novel 3D electrospun PCL/PLA blend nanofibrous scaffolds would be strongly favorable/desired for hMSCs osteogenic differentiation and cranial bone formation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Electrospinning: A fascinating fiber fabrication technique
Bhardwaj, N., & Kundu, S. C. (2010) · Biotechnology Advances · doi:10.1016/j.biotechadv.2010.01.004 · Cited by 5,028
Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering
Rezwan, K., Chen, Q. Z., Blaker, J. J., & Boccaccini, A. R. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.039 · Cited by 3,839
Synthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Three-Dimensional Scaffolds for Tissue Engineering Applications: Role of Porosity and Pore Size
Loh, Q. L., & Choong, C. (2013) · Tissue Engineering Part B: Reviews · doi:10.1089/ten.teb.2012.0437 · Cited by 2,668 · cited 1×
“Previous research endeavors suggested th at the higher mechanical strength might potentially provide better mechanical support for c ell growth by providing enough oxygen and nutrient exchanges, which is known as a major c hallenge for cell culture in thick 3D scaffolds [46, 47].”
Electrospun nanofibrous structure: A novel scaffold for tissue engineering
Li, W., Laurencin, C. T., Caterson, E. J., Tuan, R. S., & Ko, F. K. (2002) · Journal of Biomedical Materials Research · doi:10.1002/jbm.10167 · Cited by 2,427
Recent advances in bone tissue engineering scaffolds
Bose, S., Roy, M., & Bandyopadhyay, A. (2012) · Trends in Biotechnology · doi:10.1016/j.tibtech.2012.07.005 · Cited by 2,206
Polymeric Scaffolds in Tissue Engineering Application: A Review
Dhandayuthapani, B., Yoshida, Y., Maekawa, T., & Kumar, D. S. (2011) · International Journal of Polymer Science · doi:10.1155/2011/290602 · Cited by 1,773 · cited 1×
“A scaffold can act as an engineered three dimensional (3D) microenvironment for cell adhesion, proliferation, differentiation, and extracellular matrix (ECM) formation [8-10].”
Bioactive glass ceramics: properties and applications
Kokubo, T. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90194-f · Cited by 1,202
Cited by
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
Xue, J., Wu, T., Dai, Y., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00593 · Cited by 5,015
Materials design for bone-tissue engineering
Koons, G. L., Diba, M., & Mikos, A. G. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0204-2 · Cited by 1,699
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
“proposed the production of scaffolds using thermally-induced selfagglomeration of short individual electrospun nanofibres and tiny nanofibre pieces in ethanol/water/gelatin (4/2/1) solution followed by freeze-drying [26].”
MethodElectrospun polymer biomaterials
Ding, J., Zhang, J., Li, J., Li, D., Xiao, C., Xiao, H., Yang, H., Zhuang, X., & Chen, X. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.002 · Cited by 605
Electrospun nanofiber reinforced composites: a review
Jiang, S., Chen, Y., Duan, G., Mei, C., Greiner, A., & Agarwal, S. (2018) · Polymer Chemistry · doi:10.1039/c8py00378e · Cited by 560
PCL-Based Composite Scaffold Matrices for Tissue Engineering Applications
Siddiqui, N., Asawa, S., Birru, B., Baadhe, R., & Rao, S. (2018) · Molecular Biotechnology · doi:10.1007/s12033-018-0084-5 · Cited by 461
Effect of the nano/microscale structure of biomaterial scaffolds on bone regeneration
Zhu, L., Luo, D., & Liu, Y. (2020) · International Journal of Oral Science · doi:10.1038/s41368-020-0073-y · Cited by 458
Amani, H., Arzaghi, H., Bayandori, M., Dezfuli, A. S., Pazoki‐Toroudi, H., Shafiee, A., & Moradi, L. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900572 · Cited by 436
Recent Advances in Bioplastics: Application and Biodegradation
Narancic, T., Cerrone, F., Beagan, N., & O’Connor, K. E. (2020) · Polymers · doi:10.3390/polym12040920 · Cited by 421
Electrospinning: An enabling nanotechnology platform for drug delivery and regenerative medicine
Chen, S., Li, R., Li, X., & Xie, J. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.05.001 · Cited by 383
Scaffolds for bone-tissue engineering
Lee, S. S., Du, X., Kim, I., & Ferguson, S. J. (2022) · Matter · doi:10.1016/j.matt.2022.06.003 · Cited by 375
Articular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges
Wei, W., & Dai, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.011 · Cited by 327
Natural and Synthetic Polymers for Bone Scaffolds Optimization
Donnaloja, F., Jacchetti, E., Soncini, M., & Raimondi, M. T. (2020) · Polymers · doi:10.3390/polym12040905 · Cited by 324
Electrospun polymer micro/nanofibers as pharmaceutical repositories for healthcare
Feng, X., Li, J., Zhang, X., Liu, T., Ding, J., & Chen, X. (2019) · Journal of Controlled Release · doi:10.1016/j.jconrel.2019.03.020 · Cited by 322
Biomedical applications of gelatin methacryloyl hydrogels
Piao, Y., You, H., Xu, T., Bei, H.-P., Piwko, I. Z., Kwan, Y. Y., & Zhao, X. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2021.03.002 · Cited by 295
Self-citationPoly(Vinyl Alcohol)-Based Nanofibrous Electrospun Scaffolds for Tissue Engineering Applications
Teixeira, M. A., Amorim, M. T. P., & Felgueiras, H. P. (2019) · Polymers · doi:10.3390/polym12010007 · Cited by 287
4D‐Printed Biodegradable and Remotely Controllable Shape Memory Occlusion Devices
Lin, C., Lv, J., Li, Y., Zhang, F., Li, J., Liu, Y., Liu, L., & Leng, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906569 · Cited by 272
Bhattarai, D. P., Aguilar, L. E., Park, C. H., & Kim, C. S. (2018) · Membranes · doi:10.3390/membranes8030062 · Cited by 261
Qian, Y., Zhou, X., Zhang, F., Diekwisch, T. G. H., Luan, X., & Yang, J. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07053 · Cited by 235
Low‐Density Open Cellular Sponges as Functional Materials
Jiang, S., Agarwal, S., & Greiner, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700684 · Cited by 217
Melt electrowriting of PLA, PCL, and composite PLA/PCL scaffolds for tissue engineering application
Shahverdi, M., Seifi, S., Akbari, A., Mohammadi, K., Shamloo, A., & Movahhedy, M. R. (2022) · Scientific Reports · doi:10.1038/s41598-022-24275-6 · Cited by 154
Three-dimensional printed electrospun fiber-based scaffold for cartilage regeneration
Chen, W., Xu, Y., Liu, Y., Wang, Z., Li, Y., Jiang, G., Mo, X., & Zhou, G. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107886 · Cited by 136
Zhao, H., Tang, J., Zhou, D., Weng, Y., Qin, W., Liu, C., Lv, S., Wang, W., & Zhao, X. (2020) · International Journal of Nanomedicine · doi:10.2147/ijn.s238800 · Cited by 51
Lee, S. H., Jeon, S., Qu, X., Kang, M. S., Lee, J. H., Han, D.-W., & Hong, S. W. (2022) · Nano Convergence · doi:10.1186/s40580-022-00329-3 · Cited by 39
Cao, Y., Jiang, J., Jiang, Y., Li, Z., Hou, J., & Li, Q. (2022) · Polymers for Advanced Technologies · doi:10.1002/pat.5528 · Cited by 25
Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration
Sakarya, D., Zorlu, T., Yücel, S., Sahin, Y. M., & Özarslan, A. C. (2024) · Polymers · doi:10.3390/polym16040534 · Cited by 10
Metadata
- Authors
- Yao, Q., Cosme, J. G. L., Xu, T., Miszuk, J. M., Picciani, P. H. S., Fong, H., & Sun, H.
- Venue
- Biomaterials
- Publisher
- Elsevier BV
- Published
- 2017-01
- Volume
- 115
- Pages
- 115-127
- ISSN
- 0142-9612 (ISSN-L)
- OpenAlex
- W2549169970
- Cited by
- 543
- References
- 53
- FWCI
- 24.62
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.