Cited by 437Arsenic contamination and mitigationAdsorption and biosorption for pollutant removalEnvironmental remediation with nanomaterials

Biochar pyrolytically produced from municipal solid wastes for aqueous As(V) removal: Adsorption property and its improvement with KOH activation

Jin, Hongmei, Capareda, Sergio, Chang, Zhizhou, Gao, Jun, Xu, Yueding, Zhang, Jianying·2014·Bioresource Technology

Abstract

Biochar converted from waste products is being considered as an alternative adsorbent for removal of aqueous heavy metal(loid)s. In this work, experimental and modeling investigations were conducted to examine the effect of biochars pyrolytically produced from municipal solid wastes on removing aqueous As(V) before and after activated by 2M KOH solution. Results showed that the highest adsorption capacity of pristine biochars was 24.49 mg/g. The pseudo-second-order model and Langmuir adsorption isotherm model can preferably describe the adsorption process. The activated biochar showed enhanced As(V) adsorption ability with an adsorption capacity of 30.98 mg/g, which was more than 1.3 times of pristine biochars, and 2-10 times of modified biochars reported by other literatures. Increase of surface area and changes of porous texture, especially the functional groups on the surface of activated biochars are the major contributors to its more efficient adsorption of As(V).

Integrity signals

Registry

Crossref · 10.1016/j.biortech.2014.06.103

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Potassium hydroxide modification increases the surface area of biochar prepared by pyrolysis from 14.4 to 49.1 m2/g, and increases oxygen-containing functional groups, thus enhancing the sorption capacity of As(V) from 24.49 mg/g for the original biochar to 30.98 mg/g.

    “Potassium hydroxide modification increases the surface area of biochar prepared by pyrolysis from 14.4 to 49.1 m 2 · g -1 , and increases the oxygen-containing functional groups, thus enhancing the sorption capacity of As(V) from 24.49 mg · g -1 for the original biochar to 30.98 mg · g -1 (Jin et al. 2014).”

Cites

Flagged first, then by citations

Cited by

Sorted by citations

Authors
Jin, H., Capareda, S., Chang, Z., Gao, J., Xu, Y., & Zhang, J.
Affiliations
  • Jiangsu Academy of Agricultural Sciences (CN)
  • Texas A&M University (US)
  • Ministry of Ecology and Environment (CN)
Corresponding author
Chang, Zhizhou
Venue
Bioresource Technology
Publisher
Elsevier BV
Published
2014-10
Volume
169
Pages
622-629
ISSN
0960-8524 (ISSN-L)
OpenAlex
W2056698497
Cited by
437
References
36
Citations by year
2026: 21 · 2025: 41 · 2024: 49 · 2023: 45 · 2022: 72 · 2021: 54 · 2020: 49 · 2019: 33 · 2018: 31 · 2017: 27 · 2016: 11 · 2015: 4
FWCI
10.64
Type
journal article
Language
en
Open access
closed
Locations
  • Bioresource Technology (publishedVersion)
  • PubMed (publishedVersion)
Funders
  • National Natural Science Foundation of China (21107038)
  • Agricultural Science and Technology of Jiangsu Province (CX(12)5055)
  • Agro-scientific Research in the Public Interest (201203050)
  • Natural Science Foundation of Jiangsu Province (2011079)
Topics
  • Physical Sciences › Environmental Science › Environmental Chemistry › Arsenic contamination and mitigation
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Engineering › Biomedical Engineering › Environmental remediation with nanomaterials
Keywords
biochar, municipal solid waste, pyrolysis, arsenic(V) removal, adsorption, KOH activation, heavy metal removal, adsorption isotherms, pseudo-second-order kinetics, surface functional groups, porous texture, surface area
MeSH terms
Adsorption, Arsenic, Charcoal, Cities, Hot Temperature, Hydrogen-Ion Concentration, Hydroxides, Kinetics, Texas, Time Factors, Water Pollutants, Chemical, Porosity, Potassium Compounds, Water Purification, Biomass, Solid Waste

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review