The DOI matches its Crossref record; 150 of the 150 references it cites were found in a registry or an index.
A review on anode for lithium-sulfur batteries: Progress and prospects
Open accessAbstract
Abstract Lithium-sulfur battery is regarded as one of the promising next-generation energy storage to electrical and portable devices thanks to its extremely high theoretical capacity, energy density, good environmental protection and low cost. However, the practical application of lithium-sulfur battery is still greatly impeded by the low Coulombic efficiency and the short lifespan, which is mainly attributed to the polysulfide shuttle and the uncontrollable lithium dendrite growth. Suppressing the growth of the lithium dendrite and hindering the notorious reaction between soluble polysulfides and lithium are extremely critical not only to a safe and efficient lithium anode, but also to the high-capacity lithium-sulfur battery. A comprehensive review of various strategies for strengthening the anode stability of lithium-sulfur battery is presented in this paper, including modifying the electrolyte and current collector, employing artificial protection films and finding alternative anodes to replace the lithium anode. The effects of different selections and the resulting properties of the anodes on the overall lithium-sulfur battery performance are discussed. The current research challenges and future perspectives associated with lithium-sulfur battery anode are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Synthesis of graphene-based nanosheets via chemical reduction of exfoliated graphite oxide
Stankovich, S., Dikin, D. A., Piner, R. D., Kohlhaas, K. A., Kleinhammes, A., Jia, Y., Wu, Y., Nguyen, S. T., & Ruoff, R. S. (2007) · Carbon · doi:10.1016/j.carbon.2007.02.034 · Cited by 13,878
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Impermeable Atomic Membranes from Graphene Sheets
Bunch, J. S., Verbridge, S. S., Alden, J. S., van der Zande, A. M., Parpia, J. M., Craighead, H. G., & McEuen, P. L. (2008) · Nano Letters · doi:10.1021/nl801457b · Cited by 2,919
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Lin, D., Liu, Y., Liang, Z., Lee, H.-W., Sun, J., Wang, H., Yan, K., Xie, J., & Cui, Y. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2016.32 · Cited by 1,798
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Aurbach, D. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00080-2 · Cited by 1,697
A realizable renewable energy future
Turner, J. A. (1999) · Science · doi:10.1126/science.285.5428.687 · Cited by 1,642
Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review
Su, X., Wu, Q., Li, J., Xiao, X., Lott, A., Lu, W., Sheldon, B. W., & Wu, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300882 · Cited by 1,593
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
The synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
A facile surface chemistry route to a stabilized lithium metal anode
Liang, X., Pang, Q., Kochetkov, I. R., Sempere, M. S., Huang, H., Sun, X., & Nazar, L. F. (2017) · Nature Energy · doi:10.1038/nenergy.2017.119 · Cited by 1,083
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
Liu, Y., Lin, D., Yuen, P. Y., Liu, K., Xie, J., Dauskardt, R. H., & Cui, Y. (2017) · Advanced Materials · doi:10.1002/adma.201605531 · Cited by 990
(1998) · Wiley eBooks · doi:10.1002/9783527611676 · Cited by 972
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode
Liu, Y., Lin, D., Liang, Z., Zhao, J., Yan, K., & Cui, Y. (2016) · Nature Communications · doi:10.1038/ncomms10992 · Cited by 902
MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Wood, K. N., Kazyak, E., Chadwick, A. F., Chen, K.-H., Zhang, J.-G., Thornton, K., & Dasgupta, N. P. (2016) · ACS Central Science · doi:10.1021/acscentsci.6b00260 · Cited by 900
Derrien, G., Hassoun, J., Panero, S., & Scrosati, B. (2007) · Advanced Materials · doi:10.1002/adma.200700748 · Cited by 868
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
3D Porous Cu Current Collector/Li‐Metal Composite Anode for Stable Lithium‐Metal Batteries
Li, Q., Zhu, S., & Lu, Y. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606422 · Cited by 854
Self-citationMultifunctionality and control of the crumpling and unfolding of large-area graphene
Zang, J., Ryu, S., Pugno, N., Wang, Q., Tu, Q., Buehler, M. J., & Zhao, X. (2013) · Nature Materials · doi:10.1038/nmat3542 · Cited by 831
In situ NMR observation of the formation of metallic lithium microstructures in lithium batteries
Bhattacharyya, R., Key, B., Chen, H., Best, A. S., Hollenkamp, A. F., & Grey, C. P. (2010) · Nature Materials · doi:10.1038/nmat2764 · Cited by 813
Huang, J.-Q., Zhuang, T.-Z., Zhang, Q., Peng, H.-J., Chen, C.-M., & Wei, F. (2015) · ACS Nano · doi:10.1021/nn507178a · Cited by 809
2D MoS2 as an efficient protective layer for lithium metal anodes in high-performance Li–S batteries
Cha, E., Patel, M. D., Park, J., Hwang, J., Prasad, V., Cho, K., & Choi, W. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0061-y · Cited by 767
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Yan, K., Lee, H.-W., Gao, T., Zheng, G., Yao, H., Wang, H., Lu, Z., Zhou, Y., Liang, Z., Liu, Z., et al. (2014) · Nano Letters · doi:10.1021/nl503125u · Cited by 742
Fuel cell and battery electric vehicles compared
Thomas, C. E. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.06.003 · Cited by 702
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Challenges for rechargeable batteries
Goodenough, J. B., & Kim, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.074 · Cited by 636
Prospective materials and applications for Li secondary batteries
Jeong, G., Kim, Y.-U., Kim, H., Kim, Y.-J., & Sohn, H.-J. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00831a · Cited by 616
Dendrite short-circuit and fuse effect on Li/polymer/Li cells
Rosso, M., Brissot, C., Teyssot, A., Dollé, M., Sannier, L., Tarascon, J.-M., Bouchet, R., & Lascaud, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.02.004 · Cited by 589
Graphitized Carbon Fibers as Multifunctional 3D Current Collectors for High Areal Capacity Li Anodes
Zuo, T., Wu, X., Yang, C., Yin, Y., Ye, H., Li, N., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700389 · Cited by 579
Advanced Micro/Nanostructures for Lithium Metal Anodes
Zhang, R., Li, N., Cheng, X., Yin, Y., Zhang, Q., & Guo, Y. (2017) · Advanced Science · doi:10.1002/advs.201600445 · Cited by 549
Towards High‐Safe Lithium Metal Anodes: Suppressing Lithium Dendrites via Tuning Surface Energy
Wang, D., Zhang, W., Zheng, W., Cui, X., Rojo, T., & Zhang, Q. (2017) · Advanced Science · doi:10.1002/advs.201600168 · Cited by 548
Polymer Nanofiber-Guided Uniform Lithium Deposition for Battery Electrodes
Liang, Z., Zheng, G., Liu, C., Liu, N., Li, W., Yan, K., Yao, H., Hsu, P.-C., Chu, S., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5046318 · Cited by 540
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries
Cheng, X.-B., Yan, C., Chen, X., Guan, C., Huang, J.-Q., Peng, H.-J., Zhang, R., Yang, S.-T., & Zhang, Q. (2017) · Chem · doi:10.1016/j.chempr.2017.01.003 · Cited by 524
Mao, Y., Li, G., Guo, Y., Li, Z., Liang, C., Peng, X., & Lin, Z. (2017) · Nature Communications · doi:10.1038/ncomms14628 · Cited by 518
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
3D lithium metal embedded within lithiophilic porous matrix for stable lithium metal batteries
Jin, C., Sheng, O., Luo, J., Yuan, H., Fang, C., Zhang, W., Huang, H., Gan, Y., Xia, Y., Liang, C., et al. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.015 · Cited by 501
7Li MRI of Li batteries reveals location of microstructural lithium
Chandrashekar, S., Trease, N. M., Chang, H. J., Du, L.-S., Grey, C. P., & Jerschow, A. (2012) · Nature Materials · doi:10.1038/nmat3246 · Cited by 499
Ryou, M., Lee, D. J., Lee, J., Lee, Y. M., Park, J., & Choi, J. W. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100687 · Cited by 473
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Stabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Ionic conductivity in Li3N single crystals
Alpen, U. V., Rabenau, A., & Talat, G. H. (1977) · Applied Physics Letters · doi:10.1063/1.89283 · Cited by 437
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries
Zhang, Z., Lai, Y., Zhang, Z., Zhang, K., & Li, J. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.02.077 · Cited by 418
Solvent-Dictated Lithium Sulfur Redox Reactions: An Operando UV–vis Spectroscopic Study
Zou, Q., & Lu, Y.-C. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00228 · Cited by 411
Cheng, X.-B., Yan, C., Huang, J.-Q., Li, P., Zhu, L., Zhao, L., Zhang, Y., Zhu, W., Yang, S.-T., & Zhang, Q. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.09.003 · Cited by 394
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Self-citationFree-Standing Hollow Carbon Fibers as High-Capacity Containers for Stable Lithium Metal Anodes
Liu, L., Yin, Y.-X., Li, J.-Y., Li, N.-W., Zeng, X.-X., Ye, H., Guo, Y.-G., & Wan, L.-J. (2017) · Joule · doi:10.1016/j.joule.2017.06.004 · Cited by 391
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Forney, M. W., Ganter, M. J., Staub, J. W., Ridgley, R. D., & Landi, B. J. (2013) · Nano Letters · doi:10.1021/nl401776d · Cited by 381
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Wu, F., Lee, J. T., Nitta, N., Kim, H., Borodin, O., & Yushin, G. (2015) · Advanced Materials · doi:10.1002/adma.201404194 · Cited by 352
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Factors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries
Aurbach, D., Zinigrad, E., Teller, H., & Dan, P. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393349 · Cited by 340
Regulating Li deposition at artificial solid electrolyte interphases
Fan, L., Zhuang, H. L., Gao, L., Lu, Y., & Archer, L. A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10204b · Cited by 327
Cheng, X.-B., Peng, H.-J., Huang, J.-Q., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2015) · ACS Nano · doi:10.1021/acsnano.5b01990 · Cited by 321
Xu, N., Qian, T., Liu, X., Liu, J., Chen, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04610 · Cited by 319
Anode Improvement in Rechargeable Lithium–Sulfur Batteries
Tao, T., Lu, S., Fan, Y., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Materials · doi:10.1002/adma.201700542 · Cited by 304
A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery
Barghamadi, M., Kapoor, A., & Wen, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.096308jes · Cited by 299
Electrochemical behaviors of a Li3N modified Li metal electrode in secondary lithium batteries
Wu, M., Wen, Z., Liu, Y., Wang, X., & Huang, L. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.05.035 · Cited by 298
Self-citationCrack Pattern Formation in Thin Film Lithium-Ion Battery Electrodes
Li, J., Dozier, A., Li, Y., Yang, F., & Cheng, Y. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3574027 · Cited by 297
Shuttle phenomenon – The irreversible oxidation mechanism of sulfur active material in Li–S battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.132 · Cited by 285
Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries
Huang, J.-Q., Xu, Z.-L., Abouali, S., Akbari Garakani, M., & Kim, J.-K. (2016) · Carbon · doi:10.1016/j.carbon.2015.12.081 · Cited by 266
Rechargeable lithium batteries and beyond: Progress, challenges, and future directions
Amine, K., Kanno, R., & Tzeng, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.62 · Cited by 262
Sulfurized solid electrolyte interphases with a rapid Li+ diffusion on dendrite-free Li metal anodes
Cheng, X.-B., Yan, C., Peng, H.-J., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.03.008 · Cited by 257
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Fan, Y., Yang, Z., Hua, W., Liu, D., Tao, T., Rahman, M. M., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602380 · Cited by 253
Zhang, L., Ling, M., Feng, J., Mai, L., Liu, G., & Guo, J. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.09.001 · Cited by 251
Li, Z., & Yin, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507660y · Cited by 248
Molecular structure and stability of dissolved lithium polysulfide species
Vijayakumar, M., Govind, N., Walter, E., Burton, S. D., Shukla, A., Devaraj, A., Xiao, J., Liu, J., Wang, C., Karim, A., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00889h · Cited by 245
The critical role of lithium nitrate in the gas evolution of lithium–sulfur batteries
Jozwiuk, A., Berkes, B. B., Weiss, T. M., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00789a · Cited by 245
Zhao, Q., Tu, Z., Wei, S., Zhang, K., Choudhury, S., Liu, X., & Archer, L. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711598 · Cited by 241
A new finding on the role of LiNO3 in lithium-sulfur battery
Zhang, S. S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.05.009 · Cited by 239
An Aqueous Rechargeable Lithium Battery Using Coated Li Metal as Anode
Wang, X., Hou, Y., Zhu, Y., Wu, Y., & Holze, R. (2013) · Scientific Reports · doi:10.1038/srep01401 · Cited by 235
Self-citationLiu, M., Li, Q., Qin, X., Liang, G., Han, W., Zhou, D., He, Y., Li, B., & Kang, F. (2017) · Small · doi:10.1002/smll.201602539 · Cited by 233
Self-citationIn Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
Zheng, S., Chen, Y., Xu, Y., Yi, F., Zhu, Y., Liu, Y., Yang, J., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn404601h · Cited by 230
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
Protected lithium anode with porous Al2O3layer for lithium–sulfur battery
Jing, H.-K., Kong, L.-L., Liu, S., Li, G.-R., & Gao, X.-P. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01490e · Cited by 220
In Situ Chemical Imaging of Solid-Electrolyte Interphase Layer Evolution in Li–S Batteries
Nandasiri, M. I., Camacho-Forero, L. E., Schwarz, A. M., Shutthanandan, V., Thevuthasan, S., Balbuena, P. B., Mueller, K. T., & Murugesan, V. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00374 · Cited by 218
Electrochemically-driven solid-state amorphization in lithium–metal anodes
Limthongkul, P., Jang, Y.-I., Dudney, N. J., & Chiang, Y. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00303-3 · Cited by 208
Rong, G., Zhang, X., Zhao, W. J., Qiu, Y., Liu, M., Ye, F., Xu, Y., Chen, J., Hou, Y., Li, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606187 · Cited by 203
Selection of battery technology to support grid-integrated renewable electricity
Leadbetter, J., & Swan, L. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.081 · Cited by 202
Kim, J.-S., Kim, D. W., Jung, H. T., & Choi, J. W. (2015) · Chemistry of Materials · doi:10.1021/cm503447u · Cited by 199
XAFS and TOF–SIMS analysis of SEI layers on electrodes
Ota, H., Akai, T., Namita, H., Yamaguchi, S., & Nomura, M. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00291-x · Cited by 185
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Self-Formed Hybrid Interphase Layer on Lithium Metal for High-Performance Lithium–Sulfur Batteries
Li, G., Huang, Q., He, X., Gao, Y., Wang, D., Kim, S. H., & Wang, D. (2018) · ACS Nano · doi:10.1021/acsnano.7b08035 · Cited by 178
Liu, S., Li, G.-R., & Gao, X.-P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b12231 · Cited by 177
A prelithiated carbon anode for lithium-ion battery applications
Jarvis, C. R., Lain, M. J., Yakovleva, M. V., & Gao, Y. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.07.051 · Cited by 175
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Enhanced cycle performance of a Li–S battery based on a protected lithium anode
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04172k · Cited by 139
Sulphur back in vogue for batteries
Noorden, R. V. (2013) · Nature · doi:10.1038/498416a · Cited by 136
Future prospects of the lithium metal anode
Takehara, Z. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02546-3 · Cited by 135
Atomic Layer Deposition of LixAlyS Solid‐State Electrolytes for Stabilizing Lithium‐Metal Anodes
Cao, Y., Meng, X., & Elam, J. W. (2016) · ChemElectroChem · doi:10.1002/celc.201600139 · Cited by 128
Li, X., Sun, Q., Liu, J., Xiao, B., Li, R., & Sun, X. A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.10.049 · Cited by 117
Younesi, R., Hahlin, M., Roberts, M. R., & Edström, K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.011 · Cited by 115
SBR–PVDF based binder for the application of SLMP in graphite anodes
Wang, L., Fu, Y., Battaglia, V., & Liu, G. (2013) · RSC Advances · doi:10.1039/c3ra42773k · Cited by 111
Metal-organic framework nanosheets-guided uniform lithium deposition for metallic lithium batteries
Jiang, Z., Liu, T., Yan, L., Liu, J., Dong, F., Ling, M., Liang, C., & Lin, Z. (2017) · Energy storage materials · doi:10.1016/j.ensm.2017.11.003 · Cited by 97
Estimation of energy density of Li-S batteries with liquid and solid electrolytes
Li, C., Zhang, H., Otaegui, L., Singh, G., Armand, M. B., & Rodrı́guez-Martı́nez, L. M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.109 · Cited by 94
Zhou, X., Liao, Q., Tang, J., Bai, T., Chen, F., & Yang, J. (2016) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2016.02.037 · Cited by 86
Krause, A., Dörfler, S., Piwko, M., Wisser, F. M., Jaumann, T., Ahrens, E., Giebeler, L., Althues, H., Schädlich, S., Grothe, J., et al. (2016) · Scientific Reports · doi:10.1038/srep27982 · Cited by 85
Täubert, C., Fleischhammer, M., Wohlfahrt‐Mehrens, M., Wietelmann, U., & Buhrmester, T. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3374666 · Cited by 82
Protection of Lithium Metal Surfaces Using Chlorosilanes
Marchioni, F., Star, K. E., Menke, E., Buffeteau, T., Servant, L., Dunn, B., & Wudl, F. (2007) · Langmuir · doi:10.1021/la701662r · Cited by 82
Winter, M., & Besenhard, J. O. (1999) · Chemie in unserer Zeit · doi:10.1002/ciuz.19990330603 · Cited by 79
Stabilization of lithium metal anodes using silane-based coatings
Thompson, R. S., Schroeder, D. J., López, C. M., Neuhold, S., & Vaughey, J. T. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.08.012 · Cited by 77
Shen, C., Ge, M., Zhang, A., Fang, X., Liu, Y., Rong, J., & Zhou, C. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.11.013 · Cited by 76
Xie, K., Yuan, K., Zhang, K., Shen, C., Lv, W., Liu, X., Wang, J., & Wei, B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14039 · Cited by 76
Transient existence of crystalline lithium disulfide Li2S2 in a lithium-sulfur battery
Paolella, A., Zhu, W., Marceau, H., Kim, C., Feng, Z., Liu, D.-Q., Gagnon, C., Trottier, J., Guerfi, A., Hovington, P., et al. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.06.086 · Cited by 75
Kulisch, J., Sommer, H., Brezesinski, T., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02220c · Cited by 64
Sun, C., Huang, X., Jin, J. H., Lu, Y., Wang, Q., Yang, J., & Wen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.063 · Cited by 55
Hierarchical columnar silicon anode structures for high energy density lithium sulfur batteries
Piwko, M., Kuntze, T. H., Winkler, S., Straach, S., Härtel, P., Althues, H., & Kaskel, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.080 · Cited by 52
Wiederaufladbare Batterien -2.Teil; Akkumulatoren mit nichtwässriger Elektrolytlösung
Winter, M., & Besenhard, J. O. (1999) · Chemie in unserer Zeit · Cited by 52
Li, Q., Yang, H., Naveed, A., Guo, C., Yang, J., NuLi, Y., & Wang, J. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.02.004 · Cited by 48
Self-citationLi, W., Zheng, H., Chu, G., Luo, F., Zheng, J., Xiao, D., Li, X., Gu, L., Li, H., Wei, X., et al. (2014) · Faraday Discussions · doi:10.1039/c4fd00124a · Cited by 46
Probing Impedance and Microstructure Evolution in Lithium–Sulfur Battery Electrodes
Chen, C., Mistry, A. N., & Mukherjee, P. P. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07245 · Cited by 44
Zn-MOF derived micro/meso porous carbon nanorod for high performance lithium–sulfur battery
Qian, X., Jin, L., Wang, S., Yao, S., Rao, D., Shen, X., Xi, X., & Xiang, J. (2016) · RSC Advances · doi:10.1039/c6ra19356k · Cited by 40
Power capability improvement of LiBOB/PC electrolyte for Li-ion batteries
Kaneko, H., Sekine, K., & Takamura, T. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.115 · Cited by 29
Mohan, E. H., Sarada, B. V., Naidu, R. V. R., Salian, G. D., Haridas, A. K., Rao, B. V. A., & Rao, T. N. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.10.042 · Cited by 22
The Enhanced Electrochemical Performance of Lithium/Sulfur Battery with Protected Lithium Anode
Zheng, M. S., Chen, J., & Dong, Q. (2012) · Advanced materials research · doi:10.4028/www.scientific.net/amr.476-478.676 · Cited by 15
Effect of polypyrrole coating on Li powder anode for lithium-sulfur secondary batteries
Oh, S. J., & Yoon, W. Y. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0490-y · Cited by 12
Cited by
Towards practical lithium-metal anodes
Zhang, X., Yang, Y., & Zhou, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00838a · Cited by 726
Advancing energy storage: The future trajectory of lithium-ion battery technologies
Hasan, M. M., Haque, R., Jahirul, M. I., Rasul, M. G., Fattah, I. M. R., Hassan, N. M. S., & Mofijur, M. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.116511 · Cited by 446
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Carbon nanotube-based materials for lithium–sulfur batteries
Zheng, M., Chi, Y., Hu, Q., Tang, H., Jiang, X., Zhang, L., Zhang, S., Pang, H., & Xu, Q. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta05347f · Cited by 311
Mechanistic understanding of the role separators playing in advanced lithium‐sulfur batteries
Wei, Z., Ren, Y., Sokolowski, J., Zhu, X., & Wu, G. (2020) · InfoMat · doi:10.1002/inf2.12097 · Cited by 302
Metadata
- Authors
- Zhao, H., Deng, N., Yan, J., Kang, W., Ju, J., Ruan, Y., Wang, X., Zhuang, X., Li, Q., & Cheng, B.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 347
- Pages
- 343-365
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W2801869641
- Cited by
- 299
- References
- 150
- FWCI
- 12.80
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.