The DOI matches its Crossref record; 120 of the 120 references it cites were found in a registry or an index.
3-D printing of concrete: Beyond horizons
Open accessAbstract
Abstract 3-D printing is a disruptive technology that can have enormous social and economic impacts in years to come. The technology, which took shape in the 1980's and was initially limited to manufacturing small products, is moving to large scale construction applications, utilizing concrete and other cementitious and binder materials. This paper presents a state-of-the-art and state-of-the-practice of 3-D printing of concrete including a historical background and advances in equipment, materials, and computer modeling. Some demonstration projects are presented and opportunities and challenges associated with 3-D printing of concrete are identified. Formulation of ink utilizing local and in-situ materials is a major challenge and will continue to develop. Developments will also continue on large scale construction 3-D printers. The paper should be of value to both the seasoned researchers and beginners in 3-D printing, and also to those working on transitioning 3-D printing in construction from research to practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Nanotechnology in concrete – A review
Sanchez, F., & Sobolev, K. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.03.014 · Cited by 1,834
Self-citation3D printing using concrete extrusion: A roadmap for research
Buswell, R. A., Leal de Silva, W. R., Jones, S. Z., & Dirrenberger, J. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.006 · Cited by 1,604
Materials discovery and design using machine learning
Liu, Y., Zhao, T., Ju, W., & Shi, S. (2017) · Journal of Materiomics · doi:10.1016/j.jmat.2017.08.002 · Cited by 1,276
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Mix design and fresh properties for high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Gibb, A. G. F., & Thorpe, T. (2012) · Materials and Structures · doi:10.1617/s11527-012-9828-z · Cited by 1,218
Rheological requirements for printable concretes
Roussel, N. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.005 · Cited by 1,203
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Hardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Martys, N. S., & Chen, H. (1996) · Physical Review E · doi:10.1103/physreve.53.743 · Cited by 892
Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.02.001 · Cited by 846
Intrinsic self-sensing concrete and structures: A review
Han, B., Ding, S., & Yu, X. (2014) · Measurement · doi:10.1016/j.measurement.2014.09.048 · Cited by 843
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.02.017 · Cited by 836
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Kazemian, A., Yuan, X., Cochran, E., & Khoshnevis, B. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.015 · Cited by 774
Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
Panda, B., Paul, S. C., & Tan, M. J. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.07.123 · Cited by 742
Effect of surface moisture on inter-layer strength of 3D printed concrete
Sanjayan, J., Nematollahi, B., Xia, M., & Marchment, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.232 · Cited by 713
A review of the current progress and application of 3D printed concrete
Zhang, J., Wang, J., Dong, S., Yu, X., & Han, B. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.105533 · Cited by 629
Ma, G., Li, Z., & Wang, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.051 · Cited by 616
Wangler, T., Roussel, N., Bos, F. P., Salet, T. A. M., & Flatt, R. J. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105780 · Cited by 612
Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing
Ma, G., Li, Z., Li, W., Wang, F., & Sanjayan, J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.008 · Cited by 610
Nerella, V. N., Hempel, S., & Mechtcherine, V. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.01.235 · Cited by 605
Measurement of tensile bond strength of 3D printed geopolymer mortar
Panda, B., Paul, S. C., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Measurement · doi:10.1016/j.measurement.2017.08.051 · Cited by 592
Freeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Qi, X., Chen, G., Li, Y., Cheng, X., & Li, C. (2019) · Engineering · doi:10.1016/j.eng.2019.04.012 · Cited by 529
Panda, B., & Tan, M. J. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.03.031 · Cited by 520
Marchon, D., Kawashima, S., Bessaies-Bey, H., Mantellato, S., & Ng, S. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.014 · Cited by 507
Design of a 3D printed concrete bridge by testing
Salet, T. A. M., Ahmed, Z. Y., Bos, F. P., & Laagland, H. L. M. (2018) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1476064 · Cited by 504
Investigation of the rheology and strength of geopolymer mixtures for extrusion-based 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.10.002 · Cited by 482
3D printable concrete: Mixture design and test methods
Rahul, A. V., Santhanam, M., Meena, H., & Ghani, Z. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.12.014 · Cited by 481
Rheological and harden properties of the high-thixotropy 3D printing concrete
Zhang, Y., Zhang, Y., She, W., Yang, L. H., Liu, G., & Yang, Y. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.12.061 · Cited by 475
Properties of 3D-printed fiber-reinforced Portland cement paste
Hambach, M., & Volkmer, D. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.02.001 · Cited by 470
Large-scale 3D printing by a team of mobile robots
Zhang, X., Li, M., Lim, J. H., Weng, Y., Tay, Y. W. D., Pham, H., & Pham, Q.-C. (2018) · Automation in Construction · doi:10.1016/j.autcon.2018.08.004 · Cited by 418
Hou, D., Lu, Z., Li, X., Ma, H., & Li, Z. (2017) · Carbon · doi:10.1016/j.carbon.2017.01.013 · Cited by 410
Improving the 3D printability of high volume fly ash mixtures via the use of nano attapulgite clay
Panda, B., Ruan, S., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.11.109 · Cited by 405
Developments in 4D-printing: a review on current smart materials, technologies, and applications
Zhang, Z., Demir, K. G., & Gu, G. X. (2019) · International Journal of Smart and Nano Materials · doi:10.1080/19475411.2019.1591541 · Cited by 392
Rethinking reinforcement for digital fabrication with concrete
Asprone, D., Menna, C., Bos, F. P., Salet, T. A. M., Mata-Falcón, J., & Kaufmann, W. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.05.020 · Cited by 385
Mechanical properties of structures 3D printed with cementitious powders
Feng, P., Meng, X., Chen, J.-F., & Ye, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.05.132 · Cited by 369
Effects of interlocking on interlayer adhesion and strength of structures in 3D printing of concrete
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.08.019 · Cited by 353
Mechtcherine, V., Grafe, J., Nerella, V. N., Spaniol, E., Hertel, M., & Füssel, U. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.05.202 · Cited by 332
A self-reinforced cementitious composite for building-scale 3D printing
Soltan, D. G., & Li, V. C. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.03.017 · Cited by 330
Nematollahi, B., Vijay, P., Sanjayan, J., Nazari, A., Xia, M., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11122352 · Cited by 326
Proceedings of the 2009 International Conference on Artificial Intelligence, ICAI 2009
Garrido, P., Castro, C., & Monfroy, É. (2009) · conference · Cited by 315
Metal additive-manufacturing process and residual stress modeling
Megahed, M., Mindt, H.-W., N’Dri, N., Duan, H., & Desmaison, O. (2016) · Integrating Materials and Manufacturing Innovation · doi:10.1186/s40192-016-0047-2 · Cited by 305
Zhu, B., Pan, J., Nematollahi, B., Zhou, Z., Zhang, Y., & Sanjayan, J. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108088 · Cited by 305
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304
Panda, B., Noor Mohamed, N. A., Paul, S. C., Bhagath Singh, G., Tan, M. J., & Šavija, B. (2019) · Materials · doi:10.3390/ma12132149 · Cited by 301
Zareiyan, B., & Khoshnevis, B. (2017) · Automation in Construction · doi:10.1016/j.autcon.2017.06.013 · Cited by 288
Suiker, A. S. J. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.01.010 · Cited by 288
A systematical review of 3D printable cementitious materials
Lu, B., Weng, Y., Li, M., Qian, Y., Leong, K. F., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.02.144 · Cited by 288
4D printing of materials for the future: Opportunities and challenges
Joshi, S., Rawat, K., C, K., Rajamohan, V., Mathew, A. T., Koziol, K., Kumar Thakur, V., & A.S.S, B. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2019.100490 · Cited by 288
Extrusion and rheology characterization of geopolymer nanocomposites used in 3D printing
Panda, B., Unluer, C., & Tan, M. J. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107290 · Cited by 285
Marchment, T., Sanjayan, J., & Xia, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107684 · Cited by 281
Cements in the 21 st century: Challenges, perspectives, and opportunities
Biernacki, J. J., Bullard, J. W., Sant, G., Brown, K., Glasser, F. P., Jones, S., Ley, T., Livingston, R., Nicoleau, L., Olek, J., et al. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14948 · Cited by 276
Self-citationExperimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete
Bos, F., Ahmed, Z., Jutinov, E., & Salet, T. (2017) · Materials · doi:10.3390/ma10111314 · Cited by 276
Lu, Z., Hou, D., Meng, L., Sun, G., Lu, C., & Li, Z. (2015) · RSC Advances · doi:10.1039/c5ra18602a · Cited by 269
Ma, G., & Wang, L. (2018) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-017-0430-x · Cited by 253
Structural failure during extrusion-based 3D printing processes
Wolfs, R. J. M., & Suiker, A. S. J. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03844-6 · Cited by 244
Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing
Wolfs, R. J. M., Bos, F. P., & Salet, T. A. M. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103344 · Cited by 239
Shakor, P., Sanjayan, J., Nazari, A., & Nejadi, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.037 · Cited by 229
Autonomous healing in concrete by bio-based healing agents – A review
Gupta, S., Pang, S. D., & Kua, H. W. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.04.111 · Cited by 228
Ogura, H., Nerella, V. N., & Mechtcherine, V. (2018) · Materials · doi:10.3390/ma11081375 · Cited by 227
Large-scale 3D printing with a cable-suspended robot
Barnett, E., & Gosselin, C. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.05.001 · Cited by 225
Ductility of 3D printed concrete reinforced with short straight steel fibers
Bos, F. P., Bosco, E., & Salet, T. A. M. (2019) · Virtual and Physical Prototyping · doi:10.1080/17452759.2018.1548069 · Cited by 222
Long, W.-J., Tao, J.-L., Lin, C., Gu, Y.-C., Mei, L., Duan, H.-B., & Xing, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118054 · Cited by 220
Mechanical properties of layered geopolymer structures applicable in concrete 3D-printing
Al-Qutaifi, S., Nazari, A., & Bagheri, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.195 · Cited by 218
Chen, M., Li, L., Zheng, Y. H., Zhao, P., Lu, L., & Cheng, X. Y. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.037 · Cited by 207
Zhang, C., Hou, Z., Chen, C., Zhang, Y., Mechtcherine, V., & Sun, Z. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.103406 · Cited by 204
Micro-cable reinforced geopolymer composite for extrusion-based 3D printing
Ma, G., Li, Z., Wang, L., & Bai, G. (2019) · Materials Letters · doi:10.1016/j.matlet.2018.09.159 · Cited by 196
Lau, D., Jian, W., Yu, Z., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.01.014 · Cited by 185
Advances in characterizing and understanding the microstructure of cementitious materials
Monteiro, P. J. M., Geng, G., Marchon, D., Li, J., Alapati, P., Kurtis, K. E., & Qomi, M. J. A. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105806 · Cited by 185
Additive Manufacturing and Performance of Architectured Cement‐Based Materials
Moini, M., Olek, J., Youngblood, J. P., Magee, B., & Zavattieri, P. D. (2018) · Advanced Materials · doi:10.1002/adma.201802123 · Cited by 184
Liu, Z., Li, M., Weng, Y., Wong, T. N., & Tan, M. J. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.11.252 · Cited by 179
D’Alessandro, A., Pisello, A. L., Fabiani, C., Ubertini, F., Cabeza, L. F., & Cotana, F. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.01.014 · Cited by 174
Hosseini, E., Zakertabrizi, M., Korayem, A. H., & Xu, G. (2019) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2019.03.008 · Cited by 172
Two-Scale Topology Optimization with Microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3095815 · Cited by 172
Chen, Y., Chaves Figueiredo, S., Yalçinkaya, Ç., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019) · Materials · doi:10.3390/ma12091374 · Cited by 167
Kai, M. F., Zhang, L. W., & Liew, K. M. (2019) · Carbon · doi:10.1016/j.carbon.2019.01.097 · Cited by 166
Shakor, P., Nejadi, S., Paul, G., & Malek, S. (2019) · Frontiers in Built Environment · doi:10.3389/fbuil.2018.00085 · Cited by 161
A feasible method for measuring the buildability of fresh 3D printing mortar
Yuan, Q., Li, Z., Zhou, D., Huang, T., Huang, H. J., Jiao, D., & Shi, C. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.326 · Cited by 161
Weng, Y., Lu, B. H., Li, M., Liu, Z., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.09.039 · Cited by 158
The study of the structure rebuilding and yield stress of 3D printing geopolymer pastes
Zhang, D., Wang, D., Lin, X., & Zhang, T. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.06.233 · Cited by 155
Evaluation of workability parameters in 3D printing concrete
Papachristoforou, M., Mitsopoulos, V., & Stefanidou, M. (2018) · Procedia Structural Integrity · doi:10.1016/j.prostr.2018.09.023 · Cited by 149
Feasibility study on sustainable magnesium potassium phosphate cement paste for 3D printing
Weng, Y., Ruan, S., Li, M., Mo, L., Unluer, C., Tan, M. J., & Qian, S. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.053 · Cited by 141
A topology optimization procedure for reinforced concrete structures
Amir, O. (2012) · Computers & Structures · doi:10.1016/j.compstruc.2012.10.011 · Cited by 140
Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
Ting, G. H. A., Tay, Y. W. D., Qian, Y., & Tan, M. J. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00857-x · Cited by 140
Hou, D., Yang, T., Tang, J., & Li, S. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c8cp00006a · Cited by 117
Nair, S. A. O., Alghamdi, H., Arora, A., Mehdipour, I., Sant, G., & Neithalath, N. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16305 · Cited by 108
Method for the Enhancement of Buildability and Bending Resistance of 3D Printable Tailing Mortar
Li, Z., Li, W., & Ma, G. (2018) · International Journal of Concrete Structures and Materials · doi:10.1186/s40069-018-0269-0 · Cited by 107
Pal, D., Patil, N., Zeng, K., et al. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028580 · Cited by 106
Nanosilica particles as structural buildup agents for 3D printing with Portland cement pastes
Reales, O. A. M., Duda, P., Silva, E. C. C. M., Paiva, M. D. M., & Filho, R. D. T. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.05.174 · Cited by 106
Eftekhari, M., & Mohammadi, S. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.11.039 · Cited by 103
Large-Scale 3D Printing: The Way Forward
Jassmi, H. A., Najjar, F. A., & Mourad, A. I. (2018) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/324/1/012088 · Cited by 101
Xu, Y., & Šavija, B. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107011 · Cited by 98
Two-scale topology optimization with microstructures
Zhu, B., Skouras, M., Chen, D., & Matusik, W. (2017) · ACM Transactions on Graphics · doi:10.1145/3072959.3126835 · Cited by 94
Development of ultra-high performance concretes with self-healing micro/nano-additions
Calvo, J. L. G., Pérez, G., Carballosa, P., Erkizia, E., Gaitero, J. J., & Guerrero, A. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.02.015 · Cited by 92
Effect of viscosity modifier admixture on Portland cement paste hydration and microstructure
Figueiredo, S. C., Çopuroğlu, O., & Schlangen, E. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.04.020 · Cited by 78
Additive Manufacturing Processes for Infrastructure Construction: A Review
Bhardwaj, A., Jones, S. Z., Kalantar, N., Pei, Z., Vickers, J., Wangler, T. P., Zavattieri, P. D., & Zou, N. (2019) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4044106 · Cited by 76
EyeOpener: Editing Eyes in the Wild
Shu, Z., Shechtman, E., Samaras, D., & Hadap, S. (2016) · ACM Transactions on Graphics · doi:10.1145/2926713 · Cited by 73
3D printing cement based ink, and it’s application within the construction industry
Jianchao, Z., Zhang, T., Faried, M., & Wengang, C. (2017) · MATEC Web of Conferences · doi:10.1051/matecconf/201712002003 · Cited by 73
Machine learning can predict setting behavior and strength evolution of hydrating cement systems
Oey, T., Jones, S. Z., Bullard, J. W., & Sant, G. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16706 · Cited by 72
Microstructure-informed modelling of damage evolution in cement paste
Zhang, M., & Jivkov, A. P. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.06.017 · Cited by 67
Park, J. Y., Yoon, Y.-G., & Oh, T. K. (2019) · Applied Sciences · doi:10.3390/app9194053 · Cited by 67
Simultaneous shape and topology optimization of prestressed concrete beams
Amir, O., & Shakur, E. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1855-5 · Cited by 65
Bao, Y., Xu, M., Soltan, D. G., Xia, T., Shih, A. J., Clack, H. L., & Li, V. C. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_11 · Cited by 56
The new frontiers in computational modeling of material structures
Regli, W. C., Rossignac, J. R., Shapiro, V., & Srinivasan, V. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.03.002 · Cited by 51
Yoon, J., Kim, H., Lee, Y., & Sim, S. (2019) · Materials · doi:10.3390/ma12172678 · Cited by 45
Dingreville, R., Karnesky, R. A., Puel, G., & Schmitt, J. (2015) · Journal of Materials Science · doi:10.1007/s10853-015-9551-6 · Cited by 43
Yu, J., & Leung, C. K. Y. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_24 · Cited by 43
Topological optimization of cementitious binders: Advances and challenges
Liu, H., Du, T., Krishnan, N. M. A., Li, H., & Bauchy, M. (2018) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2018.08.002 · Cited by 42
Optimising 3D Printed Concrete Structures Using Topology Optimisation
Martens, P., Mathot, M., Bos, F. P., & Coenders, J. L. (2017) · Springer eBooks · doi:10.1007/978-3-319-59471-2_37 · Cited by 40
Bond Strength in 3D Printed Geopolymer Mortar
Panda, B., Mohamed, N. A. N., Tay, Y. W. D., & Tan, M. J. (2018) · Rilem bookseries · doi:10.1007/978-3-319-99519-9_18 · Cited by 38
Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites
Kosson, M., Brown, L. R., & Sanchez, F. (2020) · Transportation Research Record Journal of the Transportation Research Board · doi:10.1177/0361198120902704 · Cited by 26
Self-citationModeling early-age hydration kinetics of Portland cement using flexible neural tree
Wang, L., Yang, B., Chen, Y., Zhao, X., Chang, J., & Wang, H. (2010) · Neural Computing and Applications · doi:10.1007/s00521-010-0475-4 · Cited by 19
Additive Manufacturing Processes for Infrastructure Construction: A Review
Bhardwaj, A., Jones, S. Z., Kalantar, N., Pei, Z., Vickers, J., Wangler, T. P., Zavattieri, P. D., & Zou, N. (2019) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2019-2988 · Cited by 18
Kim, K. K., Yeon, J., Lee, H. J., & Yeon, K. (2019) · Polymers · doi:10.3390/polym11081321 · Cited by 16
Mueller, R. P., Townsend, I. I., Tamasy, G. J., Evers, C. J., Sibille, L., Edmunson, J. E., Fiske, M. R., Fikes, J., & Case, M. P. (2018) · ASCE International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth and Space) · doi:10.1061/9780784481899.020 · Cited by 14
Cited by
Large-scale 3D printing concrete technology: Current status and future opportunities
Xiao, J., Ji, G., Zhang, Y., Ma, G., Mechtcherine, V., Pan, J., Wang, L., Ding, T., Duan, Z., & Du, S. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104115 · Cited by 532
Mix design concepts for 3D printable concrete: A review
Zhang, C., Nerella, V. N., Krishna, A., Wang, S., Zhang, Y., Mechtcherine, V., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104155 · Cited by 421
Extrusion-based concrete 3D printing from a material perspective: A state-of-the-art review
Mohan, M. K., Rahul, A. V., De Schutter, G., & Van Tittelboom, K. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103855 · Cited by 384
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Metadata
- Authors
- Khan, M. S., Sanchez, F., & Zhou, H.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 133
- Pages
- 106070
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3020668459
- Cited by
- 260
- References
- 120
- FWCI
- 19.26
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.