The DOI matches its Crossref record; 177 of the 177 references it cites were found in a registry or an index.
Recent advances in shuttle effect inhibition for lithium sulfur batteries
Abstract
Abstract Lithium-sulfur (Li-S) batteries are one of the most promising batteries in the future due to its high theoretical specific capacity (1675 mAh g−1) and energy density (2600 Wh kg−1). However, the severe capacity fading caused by shuttle effect of polysulfide needs to be addressed before the practical application of Li-S batteries. In this review, we summarized the formation mechanism and the corresponding inhibition strategies of shuttle effect. The formation of polysulfide shuttle effect is classified into five steps: (i) formation of long-chain polysulfide, (ii) detaching of polysulfide from sulfur host, (iii) dissolution of polysulfide into electrolyte, (iv) migration of polysulfide toward lithium anode side, and (v) reaction between polysulfide and lithium anode. The corresponding strategies are reviewed and discussed step by step according to the shuttle effect formation steps of polysulfide. Evaluation and perspective of the current strategies are also discussed in this review in order to provide new view points for researchers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Ionic-liquid materials for the electrochemical challenges of the future
Armand, M., Endres, F., MacFarlane, D. R., Ohno, H., & Scrosati, B. (2009) · Nature Materials · doi:10.1038/nmat2448 · Cited by 4,619
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Advances in lithium–sulfur batteries based on multifunctional cathodes and electrolytes
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2016) · Nature Energy · doi:10.1038/nenergy.2016.132 · Cited by 2,167
Sulfur-Doped Graphene as an Efficient Metal-free Cathode Catalyst for Oxygen Reduction
Yang, Z., Yao, Z., Li, G., Fang, G., Nie, H., Liu, Z., Zhou, X., Chen, X., & Huang, S. (2012) · ACS Nano · doi:10.1021/nn203393d · Cited by 2,138
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Self-citationThe synergetic effect of lithium polysulfide and lithium nitrate to prevent lithium dendrite growth
Li, W., Yao, H., Yan, K., Zheng, G., Liang, Z., Chiang, Y.-M., & Cui, Y. (2015) · Nature Communications · doi:10.1038/ncomms8436 · Cited by 1,540
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
The use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Powering Lithium–Sulfur Battery Performance by Propelling Polysulfide Redox at Sulfiphilic Hosts
Yuan, Z., Peng, H.-J., Hou, T.-Z., Huang, J.-Q., Chen, C.-M., Wang, D.-W., Cheng, X.-B., Wei, F., & Zhang, Q. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04166 · Cited by 1,438
Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries
Fan, X., Chen, L., Borodin, O., Ji, X., Chen, J., Hou, S., Deng, T., Zheng, J., Yang, C., Liou, S.-C., et al. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0183-2 · Cited by 1,371
Metal–organic framework-based separator for lithium–sulfur batteries
Bai, S., Liu, X., Zhu, K., Wu, S., & Zhou, H. (2016) · Nature Energy · doi:10.1038/nenergy.2016.94 · Cited by 1,333
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Catalytic oxidation of Li 2 S on the surface of metal sulfides for Li−S batteries
Zhou, G., Tian, H., Jin, Y., Tao, X., Liu, B., Zhang, R., Seh, Z. W., Zhuo, D., Liu, Y., Sun, J., et al. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1615837114 · Cited by 1,278
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410174 · Cited by 1,201
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Lithium sulfur batteries, a mechanistic review
Wild, M., O'Neill, L., Zhang, T., Purkayastha, R., Minton, G., Marinescu, M., & Offer, G. J. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01388g · Cited by 1,107
Wang, Z., Dong, Y., Li, H., Zhao, Z., Bin Wu, H., Hao, C., Liu, S., Qiu, J., & Lou, X. W. (2014) · Nature Communications · doi:10.1038/ncomms6002 · Cited by 1,059
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2015) · Nature Communications · doi:10.1038/ncomms8760 · Cited by 1,058
Xiao, L., Cao, Y., Xiao, J., Schwenzer, B., Engelhard, M. H., Saraf, L. V., Nie, Z., Exarhos, G. J., & Liu, J. (2012) · Advanced Materials · doi:10.1002/adma.201103392 · Cited by 1,016
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Self-citationMoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries
Ghazi, Z. A., He, X., Khattak, A. M., Khan, N. A., Liang, B., Iqbal, A., Wang, J., Sin, H., Li, L., & Tang, Z. (2017) · Advanced Materials · doi:10.1002/adma.201606817 · Cited by 902
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Li, Z., Zhang, J., & Lou, X. W. (. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201506972 · Cited by 841
Pang, Q., Tang, J., Huang, H., Liang, X., Hart, C., Tam, K. C., & Nazar, L. F. (2015) · Advanced Materials · doi:10.1002/adma.201502467 · Cited by 780
Fibrous Hybrid of Graphene and Sulfur Nanocrystals for High-Performance Lithium–Sulfur Batteries
Zhou, G., Yin, L.-C., Wang, D.-W., Li, L., Pei, S., Gentle, I. R., Li, F., & Cheng, H.-M. (2013) · ACS Nano · doi:10.1021/nn401228t · Cited by 761
Interwoven MXene Nanosheet/Carbon‐Nanotube Composites as Li–S Cathode Hosts
Liang, X., Rangom, Y., Kwok, C. Y., Pang, Q., & Nazar, L. F. (2017) · Advanced Materials · doi:10.1002/adma.201603040 · Cited by 759
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
High-Rate, Ultralong Cycle-Life Lithium/Sulfur Batteries Enabled by Nitrogen-Doped Graphene
Qiu, Y., Li, W., Zhao, W., Li, G., Hou, Y., Liu, M., Zhou, L., Ye, F., Li, H., Wei, Z., et al. (2014) · Nano Letters · doi:10.1021/nl5020475 · Cited by 738
Zheng, J., Tian, J., Wu, D., Gu, M., Xu, W., Wang, C., Gao, F., Engelhard, M. H., Zhang, J.-G., Liu, J., et al. (2014) · Nano Letters · doi:10.1021/nl404721h · Cited by 719
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Li, Z., Wu, H. B., & (David) Lou, X. W. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02364a · Cited by 654
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries
Zhou, G., Li, L., Wang, D., Shan, X., Pei, S., Li, F., & Cheng, H. (2015) · Advanced Materials · doi:10.1002/adma.201404210 · Cited by 590
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Pang, Q., Shyamsunder, A., Narayanan, B., Kwok, C. Y., Curtiss, L. A., & Nazar, L. F. (2018) · Nature Energy · doi:10.1038/s41560-018-0214-0 · Cited by 573
He, J., Chen, Y., & Manthiram, A. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00893k · Cited by 565
Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy
Cuisinier, M., Cabelguen, P.-E., Evers, S., He, G., Kolbeck, M., Garsuch, A., Bolin, T., Balasubramanian, M., & Nazar, L. F. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz401763d · Cited by 550
3D Interconnected Electrode Materials with Ultrahigh Areal Sulfur Loading for Li–S Batteries
Fang, R., Zhao, S., Hou, P., Cheng, M., Wang, S., Cheng, H., Liu, C., & Li, F. (2016) · Advanced Materials · doi:10.1002/adma.201506014 · Cited by 532
Self-heating–induced healing of lithium dendrites
Li, L., Basu, S., Wang, Y., Chen, Z., Hundekar, P., Wang, B., Shi, J., Shi, Y., Narayanan, S., & Koratkar, N. (2018) · Science · doi:10.1126/science.aap8787 · Cited by 528
Wu, F., Chen, J., Chen, R., Wu, S., Li, L., Chen, S., & Zhao, T. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp1114724 · Cited by 520
Surface Fluorination of Reactive Battery Anode Materials for Enhanced Stability
Zhao, J., Liao, L., Shi, F., Lei, T., Chen, G., Pei, A., Sun, J., Yan, K., Zhou, G., Xie, J., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b05251 · Cited by 514
Solvate Ionic Liquid Electrolyte for Li–S Batteries
Dokko, K., Tachikawa, N., Yamauchi, K., Tsuchiya, M., Yamazaki, A., Takashima, E., Park, J.-W., Ueno, K., Seki, S., Serizawa, N., et al. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.111308jes · Cited by 507
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Lithium batteries: To the limits of lithium
Evarts, E. C. (2015) · Nature · doi:10.1038/526s93a · Cited by 501
Zhang, Z., Kong, L., Liu, S., Li, G., & Gao, X. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602543 · Cited by 472
Lithium Sulfur Battery: Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions
Yamin, H., Gorenshtein, A., Penciner, J., Sternberg, Y., & Peled, E. (1988) · Journal of The Electrochemical Society · doi:10.1149/1.2095868 · Cited by 471
Air-stable and freestanding lithium alloy/graphene foil as an alternative to lithium metal anodes
Zhao, J., Zhou, G., Yan, K., Xie, J., Li, Y., Liao, L., Jin, Y., Liu, K., Hsu, P.-C., Wang, J., et al. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.129 · Cited by 468
Deng, D.-R., Xue, F., Jia, Y.-J., Ye, J.-C., Bai, C.-D., Zheng, M.-S., & Dong, Q.-F. (2017) · ACS Nano · doi:10.1021/acsnano.7b01945 · Cited by 446
A Two-Dimensional Porous Carbon-Modified Separator for High-Energy-Density Li-S Batteries
Pei, F., Lin, L., Fu, A., Mo, S., Ou, D., Fang, X., & Zheng, N. (2018) · Joule · doi:10.1016/j.joule.2017.12.003 · Cited by 442
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201080 · Cited by 435
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Zhong, Y., Chao, D., Deng, S., Zhan, J., Fang, R., Xia, Y., Wang, Y., Wang, X., Xia, X., & Tu, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706391 · Cited by 428
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage
Yang, Y., Zheng, G., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00072a · Cited by 390
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Kong, W., Yan, L., Luo, Y., Wang, D., Jiang, K., Li, Q., Fan, S., & Wang, J. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201606663 · Cited by 376
In Situ Reactive Assembly of Scalable Core–Shell Sulfur–MnO2 Composite Cathodes
Liang, X. M., & Nazar, L. F. (2016) · ACS Nano · doi:10.1021/acsnano.5b07458 · Cited by 371
Multifunctional Co3S4@sulfur nanotubes for enhanced lithium-sulfur battery performance
Pu, J., Shen, Z., Zheng, J., Wu, W., Zhu, C., Zhou, Q., Zhang, H., & Pan, F. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.009 · Cited by 369
Ma, Z., Dou, S., Shen, A., Tao, L., Dai, L., & Wang, S. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410258 · Cited by 365
Chen, W., Lei, T., Qian, T., Lv, W., He, W., Wu, C., Liu, X., Liu, J., Chen, B., Yan, C., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702889 · Cited by 362
Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries
Moon, S., Jung, Y. H., Jung, W. K., Jung, D. S., Choi, J. W., & Kim, D. K. (2013) · Advanced Materials · doi:10.1002/adma.201303166 · Cited by 354
Peng, H., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Science · doi:10.1002/advs.201500268 · Cited by 348
Lithium–sulfur batteries—the solution is in the electrolyte, but is the electrolyte a solution?
Barghamadi, M., Best, A. S., Bhatt, A. I., Hollenkamp, A. F., Musameh, M., Rees, R. J., & Rüther, T. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee02192d · Cited by 324
Zhang, J., Shi, Y., Ding, Y., Peng, L., Zhang, W., & Yu, G. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602876 · Cited by 315
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Confined Sulfur in Microporous Carbon Renders Superior Cycling Stability in Li/S Batteries
Xu, Y., Wen, Y., Zhu, Y., Gaskell, K., Cychosz, K. A., Eichhorn, B., Xu, K., & Wang, C. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500983 · Cited by 311
Capacity Fade Analysis of Sulfur Cathodes in Lithium–Sulfur Batteries
Yan, J., Liu, X., & Li, B. (2016) · Advanced Science · doi:10.1002/advs.201600101 · Cited by 307
Shuttle phenomenon – The irreversible oxidation mechanism of sulfur active material in Li–S battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.132 · Cited by 285
Cheng, Z., Xiao, Z., Pan, H., Wang, S., & Wang, R. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702337 · Cited by 285
Li, G., Lei, W., Luo, D., Deng, Y., Deng, Z., Wang, D., Yu, A., & Chen, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01377b · Cited by 283
Zhang, J., Shi, Y., Ding, Y., Zhang, W., & Yu, G. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03849 · Cited by 280
Fu, Y., & Manthiram, A. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300950m · Cited by 278
A review of current automotive battery technology and future prospects
Budde-Meiwes, H., Drillkens, J., Lunz, B., Muennix, J., Rothgang, S., Kowal, J., & Sauer, D. U. (2013) · Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering · doi:10.1177/0954407013485567 · Cited by 277
Zhou, G., Zhao, Y., Zu, C., & Manthiram, A. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.029 · Cited by 267
A review on separators for lithium sulfur battery: Progress and prospects
Deng, N., Kang, W., Liu, Y., Ju, J., Wu, D., Li, L., Hassan, B. S., & Cheng, B. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.044 · Cited by 267
Li, G., Wang, X., Seo, M. H., Li, M., Ma, L., Yuan, Y., Wu, T., Yu, A., Wang, S., Lu, J., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03116-z · Cited by 267
Wang, C., Su, K., Wan, W., Guo, H., Zhou, H., Chen, J., Zhang, X., & Huang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14921h · Cited by 263
Chen, L., & Fan, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.015 · Cited by 259
Fan, Y., Yang, Z., Hua, W., Liu, D., Tao, T., Rahman, M. M., Lei, W., Huang, S., & Chen, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602380 · Cited by 253
Chen, W., Lei, T., Lv, W., Hu, Y., Yan, Y., Jiao, Y., He, W., Li, Z., Yan, C., & Xiong, J. (2018) · Advanced Materials · doi:10.1002/adma.201804084 · Cited by 251
Li, X., Banis, M., Lushington, A., Yang, X., Sun, Q., Zhao, Y., Liu, C., Li, Q., Wang, B., Xiao, W., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-06877-9 · Cited by 247
Sparingly Solvating Electrolytes for High Energy Density Lithium–Sulfur Batteries
Cheng, L., Curtiss, L. A., Zavadil, K. R., Gewirth, A. A., Shao, Y., & Gallagher, K. G. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00194 · Cited by 246
Molecular structure and stability of dissolved lithium polysulfide species
Vijayakumar, M., Govind, N., Walter, E., Burton, S. D., Shukla, A., Devaraj, A., Xiao, J., Liu, J., Wang, C., Karim, A., et al. (2014) · Phys. Chem. Chem. Phys. · doi:10.1039/c4cp00889h · Cited by 245
Yuan, H., Zhang, W., Wang, J.-G., Zhou, G., Zhuang, Z., Luo, J., Huang, H., Gan, Y., Liang, C., Xia, Y., et al. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.07.015 · Cited by 245
All solid-state battery with sulfur electrode and thio-LISICON electrolyte
Kobayashi, T., Imade, Y., Shishihara, D., Homma, K., Nagao, M., Watanabe, R., Yokoi, T., Yamada, A., Kanno, R., & Tatsumi, T. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.03.030 · Cited by 235
Eroglu, D., Zavadil, K. R., & Gallagher, K. G. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0611506jes · Cited by 224
Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium–Sulfur Batteries
Hua, W., Yang, Z., Nie, H., Li, Z., Yang, J., Guo, Z., Ruan, C., Chen, X., & Huang, S. (2017) · ACS Nano · doi:10.1021/acsnano.6b08627 · Cited by 224
Copper‐Stabilized Sulfur‐Microporous Carbon Cathodes for Li–S Batteries
Zheng, S., Yi, F., Li, Z., Zhu, Y., Xu, Y., Luo, C., Yang, J., & Wang, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304156 · Cited by 217
Zhou, G., Paek, E., Hwang, G. S., & Manthiram, A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501355 · Cited by 205
Electrocatalysis in Lithium Sulfur Batteries under Lean Electrolyte Conditions
Yang, Y., Zhong, Y., Shi, Q., Wang, Z., Sun, K., & Wang, H. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201808311 · Cited by 204
Lithium–Sulfur Batteries Based on Nitrogen‐Doped Carbon and an Ionic‐Liquid Electrolyte
Sun, X., Wang, X., Mayes, R. T., & Dai, S. (2012) · ChemSusChem · doi:10.1002/cssc.201200101 · Cited by 199
Single step transformation of sulphur to Li2S2/Li2S in Li-S batteries
Helen, M., Reddy, M. A., Diemant, T., Golla-Schindler, U., Behm, R. J., Kaiser, U., & Fichtner, M. (2015) · Scientific Reports · doi:10.1038/srep12146 · Cited by 198
Chang, C.-H., Chung, S.-H., & Manthiram, A. (2016) · Small · doi:10.1002/smll.201502505 · Cited by 194
Wu, D. S., Shi, F., Zhou, G., Zu, C., Liu, C., Liu, K., Liu, Y., Wang, J., Peng, Y., & Cui, Y. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.01.020 · Cited by 193
Shao, H., Wang, W., Zhang, H., Wang, A., Chen, X., & Huang, Y. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.067 · Cited by 192
Zhou, G., Liu, K., Fan, Y., Yuan, M., Liu, B., Liu, W., Shi, F., Liu, Y., Chen, W., Lopez, J., et al. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00569 · Cited by 187
Chen, S., Dai, F., Gordin, M. L., Yu, Z., Gao, Y., Song, J., & Wang, D. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201511830 · Cited by 183
Yu, M., Wang, Z., Wang, Y., Dong, Y., & Qiu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700018 · Cited by 180
Highly Stable Lithium–Sulfur Batteries Based on Laponite Nanosheet‐Coated Celgard Separators
Yang, Y., & Zhang, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201801778 · Cited by 179
Analysis of Polysulfide Dissolved in Electrolyte in Discharge-Charge Process of Li-S Battery
Diao, Y., Xie, K., Xiong, S., & Hong, X. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.060204jes · Cited by 178
Ma, G., Wen, Z., Wang, Q., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.141 · Cited by 172
Ai, W., Zhou, W., Du, Z., Chen, Y., Sun, Z., Wu, C., Zou, C., Li, C., Huang, W., & Yu, T. (2017) · Energy Storage Materials · doi:10.1016/j.ensm.2016.10.008 · Cited by 170
Xu, R.-C., Xia, X.-H., Li, S.-H., Zhang, S.-Z., Wang, X.-L., & Tu, J.-P. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta01147d · Cited by 167
Self-citationHigh-Performance All-Inorganic Solid-State Sodium–Sulfur Battery
Yue, J., Han, F., Fan, X., Zhu, X., Ma, Z., Yang, J. H., & Wang, C. (2017) · ACS Nano · doi:10.1021/acsnano.7b01445 · Cited by 167
Wu, F., Zhao, S., Chen, L., Lu, Y., Su, Y., Jia, Y., Bao, L., Wang, J., Chen, S., & Chen, R. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.06.009 · Cited by 163
Sulfiphilic Nickel Phosphosulfide Enabled Li2S Impregnation in 3D Graphene Cages for Li–S Batteries
Zhou, G., Sun, J., Jin, Y., Chen, W., Zu, C., Zhang, R., Qiu, Y., Zhao, J., Zhuo, D., Liu, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201603366 · Cited by 160
Lin, C., Zhang, W., Wang, L., Wang, Z., Zhao, W., Duan, W., Zhao, Z., Liu, B., & Jin, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta10307j · Cited by 158
Kawase, A., Shirai, S., Yamoto, Y., Arakawa, R., & Takata, T. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp00958d · Cited by 156
Zhao, Y., Feng, J., Liu, X., Wang, F., Wang, L., Shi, C., Huang, L., Feng, X. Y., Chen, X., Xu, L., et al. (2014) · Nature Communications · doi:10.1038/ncomms5565 · Cited by 154
Quan, B., Yu, S., Chung, D. Y., Jin, A., Park, J. H., Sung, Y., & Piao, Y. (2014) · Scientific Reports · doi:10.1038/srep05639 · Cited by 153
Liu, J., Wang, M., Xu, N., Qian, T., & Yan, C. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.03.017 · Cited by 153
Graphitized porous carbon materials with high sulfur loading for lithium-sulfur batteries
Peng, X., Lü, Y., Zhou, L., Sheng, T., Shen, S., Liao, H., Huang, L., Li, J., & Sun, S. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.060 · Cited by 150
Chen, J., Henderson, W. A., Pan, H., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00417 · Cited by 147
Li, F., Kaiser, M. R., Ma, J., et al. (2018) · Energy storage materials · doi:10.1016/j.ensm.2018.02.007 · Cited by 143
Wang, G., Lai, Y., Zhang, Z., Li, J., & Zhang, Z. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta07133f · Cited by 142
SnO 2 as a high-efficiency polysulfide trap in lithium–sulfur batteries
Liu, J., Yuan, L., Yuan, K., Li, Z., Hao, Z., Xiang, J., & Huang, Y. (2016) · Nanoscale · doi:10.1039/c6nr02345b · Cited by 140
Enhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
Wang, L., Yang, Z., Nie, H., Gu, C., Hua, W., Xu, X., Chen, X., Chen, Y. I., & Huang, S. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07027b · Cited by 133
Interface Chemistry Guided Long-Cycle-Life Li–S Battery
Wang, L., Dong, W., Zhang, F., & Jin, J. (2013) · Nano Letters · doi:10.1021/nl4018868 · Cited by 126
A review of atomic layer deposition providing high performance lithium sulfur batteries
Yan, B., Li, X., Bai, Z., Song, X., Xiong, D., Zhao, M., Li, D., & Lu, S. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.10.097 · Cited by 126
Yuan, X., Wu, L., He, X., Zeinu, K. M., Huang, L., Zhu, X., Hou, H., Liu, B., Hu, J., & Yang, J. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.022 · Cited by 126
Jiang, Y., Chen, F., Gao, Y., Wang, Y., Wang, S., Gao, Q., Jiao, Z., Zhao, B., & Chen, Z. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.013 · Cited by 125
Zhang, J., Cai, Y., Zhong, Q., Lai, D., & Yao, J. (2015) · Nanoscale · doi:10.1039/c5nr04768d · Cited by 122
Liu, J., Qian, T., Wang, M., Liu, X., Xu, N., You, Y., & Yan, C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02332 · Cited by 118
Abbas, S. A., Ding, J., Wu, S. H., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b06478 · Cited by 114
Infiltrated Porous Polymer Sheets as Free‐Standing Flexible Lithium‐Sulfur Battery Electrodes
Wu, F., Zhao, E., Gordon, D., Xiao, Y., Hu, C., & Yushin, G. N. (2016) · Advanced Materials · doi:10.1002/adma.201600757 · Cited by 112
Chitosan as a functional additive for high-performance lithium–sulfur batteries
Chen, Y., Liu, N., Shao, H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03032c · Cited by 106
Tang, Y., Liu, X., Ma, C., Zhou, M., Huo, P., Yu, L., Pan, J., Shi, W., & Yan, Y. (2015) · New Journal of Chemistry · doi:10.1039/c5nj00681c · Cited by 104
Hou, Y., Li, J., Gao, X., Wen, Z., Yuan, C. Y., & Chen, J. (2016) · Nanoscale · doi:10.1039/c5nr09037g · Cited by 100
Electrochemically Active Polymers for Electrochemical Energy Storage: Opportunities and Challenges
Mike, J. F., & Lutkenhaus, J. L. (2013) · ACS Macro Letters · doi:10.1021/mz400329j · Cited by 99
Li, F., Su, Y., & Zhao, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp04071c · Cited by 99
Yu, Q., Lu, Y. M., Luo, R., Liu, X., Huo, K., Kim, J., He, J. H., & Luo, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804520 · Cited by 96
Zuo, P., Hua, J., He, M., Zhang, H., Qian, Z., Ma, Y., Du, C., Cheng, X., Gao, Y., & Yin, G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02245j · Cited by 94
Li, M., Zhang, Y., Bai, Z., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804271 · Cited by 93
Recent progress in metal–organic frameworks for lithium–sulfur batteries
Zhong, Y., Xu, X., Liu, Y., Wang, W., & Shao, Z. (2018) · Polyhedron · doi:10.1016/j.poly.2018.08.067 · Cited by 84
Wang, M., Fan, L., Wu, X., Tian, D., Cheng, J., Qiu, Y., Wu, H., Guan, B., Zhang, N., Sun, K., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta04937d · Cited by 78
Wu, F., Ye, Y., Chen, R., Zhao, T., Qian, J., Zhang, X., Li, L., Huang, Q., Bai, X., & Cui, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201601591 · Cited by 77
Xie, K., Yuan, K., Zhang, K., Shen, C., Lv, W., Liu, X., Wang, J., & Wei, B. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b14039 · Cited by 76
Deng, Y., Xu, H., Bai, Z., Huang, B., Su, J., & Chen, G. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.091 · Cited by 73
A hydrophilic separator for high performance lithium sulfur batteries
Li, G. C., Jing, H., Su, Z. M., Lai, C., Chen, L., Yuan, C., Li, H. H., & Liu, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01970b · Cited by 73
Ahn, W., Seo, M. H., Jun, Y., Lee, D. U., Hassan, F. M. B., Wang, X., Yu, A., & Chen, Z. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10267 · Cited by 72
Ren, W., Ma, W., Zhang, S., & Tang, B. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.057 · Cited by 68
Self-citationCoO/Co‐Activated Porous Carbon Cloth Cathode for High Performance Li–S Batteries
Ren, W., Ma, W., Umair, M. M., Zhang, S., & Tang, B. (2018) · ChemSusChem · doi:10.1002/cssc.201801212 · Cited by 66
Self-citationOxygen plasma modified separator for lithium sulfur battery
Li, Z., Jiang, Q., Ma, Z., Liu, Q., Wu, Z., & Wang, S. (2015) · RSC Advances · doi:10.1039/c5ra17629h · Cited by 54
Self-Discharge Behavior of Lithium-Sulfur Batteries at Different Electrolyte/Sulfur Ratios
Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0461903jes · Cited by 51
Hao, Y., Xiong, D., Liu, W., Fan, L., Li, D., & Li, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12710 · Cited by 49
Fan, X., Zhang, Y., Li, J., Yang, K., Liang, Z., Chen, Y., Zhao, C., Zhang, Z., & Mai, K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02180e · Cited by 49
Chiochan, P., Kaewruang, S., Phattharasupakun, N., Wutthiprom, J., Maihom, T., Limtrakul, J. P., Nagarkar, S. S., Horike, S., & Sawangphruk, M. (2017) · Scientific Reports · doi:10.1038/s41598-017-18108-0 · Cited by 45
Hu, W. R., Hirota, Y., Zhu, Y., Yoshida, N., Miyamoto, M., Zheng, T., & Nishiyama, N. (2017) · ChemSusChem · doi:10.1002/cssc.201700999 · Cited by 35
Polyaniline nanofiber/vanadium pentoxide sprayed layer-by-layer electrodes for energy storage
Shao, L., Jeon, J., & Lutkenhaus, J. L. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02911a · Cited by 33
Sprayable, paintable layer-by-layer polyaniline nanofiber/graphene electrodes
Kwon, S. R., Jeon, J., & Lutkenhaus, J. L. (2015) · RSC Advances · doi:10.1039/c4ra16822d · Cited by 31
A Li-Li2S4 battery with improved discharge capacity and cycle life at low electrolyte/sulfur ratios
Shen, C., Xie, J., Zhang, M., et al. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.01.029 · Cited by 30
Meng, Z., Zhang, S., Wang, J., Yan, X., Ying, H., Xu, X., Zhang, W., Hou, X., & Han, W. (2018) · ACS Applied Energy Materials · doi:10.1021/acsaem.8b00002 · Cited by 25
Self-citationCao, Z.-Q., Sun, X., Bao, R., Yang, W. M., Xie, B., & Yang, M. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.08.005 · Cited by 23
Cited by
Chemical reactivity under nanoconfinement
Grommet, A. B., Feller, M., & Klajn, R. (2020) · Nature Nanotechnology · doi:10.1038/s41565-020-0652-2 · Cited by 779
Huang, Y., Lin, L., Zhang, C., Liu, L., Li, Y., Qiao, Z., Lin, J., Wei, Q., Wang, L., Xie, Q., et al. (2022) · Advanced Science · doi:10.1002/advs.202106004 · Cited by 463
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
The Chemistry and Promising Applications of Graphene and Porous Graphene Materials
Huang, H., Shi, H., Das, P., Qin, J., Li, Y., Wang, X., Su, F., Wen, P., Li, S., Lu, P., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909035 · Cited by 388
Li, S., Zhang, W., Zheng, J., Lv, M., Song, H., & Du, L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000779 · Cited by 373
Metadata
- Authors
- Ren, W., Ma, W., Zhang, S., & Tang, B.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 23
- Pages
- 707-732
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2915292726
- Cited by
- 434
- References
- 177
- FWCI
- 15.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.