The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Abstract
Abstract Lithium-sulfur (Li-S) battery is anticipated as one of the most promising candidates for the next-generation rechargeable cell. In order to conquer the shuttle effect of dissolution lithium polysulfides (LIPSs), the chemical interactions between sulfur host and LIPSs on the performance of Li-S batteries has recently been highlighted. Herein, a facile strategy is proposed, which produces a high-entropy metal oxide (HEMO-1) as an anchor to restrain LIPSs in Li-S batteries via chemical confinement as demonstrated by strong bonding interaction between HEMO-1 and Li2S6. The as-prepared HEMO-1 incorporates five metal components, Ni, Mg, Cu, Zn and Co, into a metal oxide crystalline structure. The homogeneously dispersive multiple metal active species in HEMO-1 favor the restriction of LIPSs and facilitate the redox reaction in the cathode of Li-S batteries. Especially, the synergistic contribution of Li-O and S-Ni bonds from the interaction between HEMO-1 and LIPSs effectively alleviate the shuttle of LIPSs between the cathode and anode. As the promoter catalyst for LIPSs, HEMO-1 shows a competitive reversible capacity, outstanding cycling stability, and a low capacity decay of 0.077% per cycle after 600 cycles. This study not only presents a high-entropy oxide promoter for polysulfide immobilizing in Li-S batteries, but also provides an avenue of high-entropy metal oxides to a variety of energy conversion and storage fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Armand, M., & Tarascon, J.-M. (2008) · Nature · doi:10.1038/451652a · Cited by 19,612
Biesinger, M. C., Payne, B. P., Grosvenor, A. P., Lau, L. W. M., Gerson, A. R., & Smart, R. S. C. (2011) · Applied Surface Science · doi:10.1016/j.apsusc.2010.10.051 · Cited by 11,640
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Rost, C. M., Sachet, E., Borman, T., Moballegh, A., Dickey, E. C., Hou, D., Jones, J. L., Curtarolo, S., & Maria, J.-P. (2015) · Nature Communications · doi:10.1038/ncomms9485 · Cited by 3,525
New interpretations of XPS spectra of nickel metal and oxides
Grosvenor, A. P., Biesinger, M. C., Smart, R. S. C., & McIntyre, N. S. (2006) · Surface Science · doi:10.1016/j.susc.2006.01.041 · Cited by 2,434
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Sulfur-Impregnated Disordered Carbon Nanotubes Cathode for Lithium–Sulfur Batteries
Guo, J., Xu, Y., & Wang, C. (2011) · Nano Letters · doi:10.1021/nl202297p · Cited by 1,278
Sun, Z., Zhang, J., Yin, L., Hu, G., Fang, R., Cheng, H.-M., & Li, F. (2017) · Nature Communications · doi:10.1038/ncomms14627 · Cited by 1,135
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Lin, H., Yang, L., Jiang, X., Li, G., Zhang, T., Yao, Q., Zheng, G. W., & Lee, J. Y. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01047h · Cited by 952
Elazari, R., Salitra, G., Garsuch, A., Panchenko, A., & Aurbach, D. (2011) · Advanced Materials · doi:10.1002/adma.201103274 · Cited by 895
Electrocatalytic Polysulfide Traps for Controlling Redox Shuttle Process of Li–S Batteries
Al Salem, H., Babu, G., V. Rao, C., & Arava, L. M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04472 · Cited by 753
Huang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401986 · Cited by 636
La1−xCaxCoO3 perovskite-type oxides: Identification of the surface oxygen species by XPS
Merino, N. A., Barbero, B. P., Eloy, P., & Cadús, L. E. (2006) · Applied Surface Science · doi:10.1016/j.apsusc.2006.02.035 · Cited by 563
Mechanochemical‐Assisted Synthesis of High‐Entropy Metal Nitride via a Soft Urea Strategy
Jin, T., Sang, X., Unocic, R. R., Kinch, R. T., Liu, X., Hu, J., Liu, H., & Dai, S. (2018) · Advanced Materials · doi:10.1002/adma.201707512 · Cited by 539
Self-citationStructural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Ye, C., Zhang, L., Guo, C., Li, D., Vasileff, A., Wang, H., & Qiao, S. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702524 · Cited by 407
Tao, Y., Wei, Y., Liu, Y., Wang, J., Qiao, W., Ling, L., & Long, D. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01662f · Cited by 362
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
Thermal Stability of Li2O2and Li2O for Li-Air Batteries: In Situ XRD and XPS Studies
Yao, K. P. C., Kwabi, D. G., Quinlan, R. A., Mansour, A. N., Grimaud, A., Lee, Y.-L., Lu, Y.-C., & Shao-Horn, Y. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.069306jes · Cited by 339
A Bifunctional Perovskite Promoter for Polysulfide Regulation toward Stable Lithium–Sulfur Batteries
Kong, L., Chen, X., Li, B., Peng, H., Huang, J., Xie, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201705219 · Cited by 332
Sulfur Cathodes Based on Conductive MXene Nanosheets for High‐Performance Lithium–Sulfur Batteries
Liang, X., Garsuch, A., & Nazar, L. F. (2015) · Angewandte Chemie · doi:10.1002/ange.201410174 · Cited by 313
Lithium-air and lithium-sulfur batteries
Bruce, P. G., Hardwick, L. J., & Abraham, K. M. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.157 · Cited by 300
Cathode materials for lithium–sulfur batteries: a practical perspective
Eftekhari, A., & Kim, D.-W. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00799j · Cited by 285
Jiang, J., Zhu, J., Ai, W., Wang, X., Wang, Y., Zou, C., Huang, W., & Yu, T. (2015) · Nature Communications · doi:10.1038/ncomms9622 · Cited by 281
Ternary Hybrid Material for High-Performance Lithium–Sulfur Battery
Fan, Q., Liu, W., Weng, Z., Sun, Y., & Wang, H. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b07071 · Cited by 264
Busche, M. R., Adelhelm, P., Sommer, H., Schneider, H., Leitner, K., & Janek, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.075 · Cited by 249
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
Zhang, Y., Zhao, Y., Yermukhambetova, A., Bakenov, Z., & Chen, P. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00105e · Cited by 227
V2O5 Polysulfide Anion Barrier for Long-Lived Li–S Batteries
Li, W., Hicks-Garner, J., Wang, J., Liu, J., Gross, A. F., Sherman, E., Graetz, J., Vajo, J. J., & Liu, P. (2014) · Chemistry of Materials · doi:10.1021/cm500575q · Cited by 217
Ponraj, R., Kannan, A. G., Ahn, J. H., & Kim, D.-W. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11327 · Cited by 168
Shao, H., Ai, F., Wang, W., Zhang, H., Wang, A.-B., Wang, F., & Huang, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta05192a · Cited by 133
Wu, F., Pollard, T. P., Zhao, E., Xiao, Y., Olguin, M., Borodin, O. A., & Yushin, G. N. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00419f · Cited by 118
Zheng, D., Wang, G., Liŭ, D., et al. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201700233 · Cited by 108
Sun, H., Chen, G., Zhu, Y., Liu, B., Zhou, W., & Shao, Z. (2017) · Chemistry - A European Journal · doi:10.1002/chem.201700507 · Cited by 79
Huang, K., Bi, K., Liang, C., Lin, S., Zhang, R., Wang, W., Tang, H., & Lei, M. (2015) · Scientific Reports · doi:10.1038/srep11351 · Cited by 66
Self-citationCarter, R., Davis, B., Oakes, L., Maschmann, M. R., & Pint, C. L. (2017) · Nanoscale · doi:10.1039/c7nr02368e · Cited by 41
Yan, Y., Wei, Y., Li, Q., Shi, M., Zhao, C., Chen, L., Fan, C., Yang, R., & Xu, Y. (2018) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-018-9220-z · Cited by 38
Synergistic Effects in Multicomponent Electrocatalysts: The Pb−Ir−O System
Mullens, C. P., Pikulski, M., Agachan, S., & Górski, W. (2003) · Journal of the American Chemical Society · doi:10.1021/ja0366843 · Cited by 18
Cited by
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
High-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
High-entropy energy materials: challenges and new opportunities
Ma, Y., Ma, Y., Wang, Q., Schweidler, S., Botros, M., Fu, T., Hahn, H., Brezesinski, T., & Breitung, B. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00505g · Cited by 963
Recent progress of high-entropy materials for energy storage and conversion
Amiri, A., & Shahbazian-Yassar, R. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09578h · Cited by 592
Metadata
- Authors
- Zheng, Y., Yi, Y., Fan, M., Liu, H., Li, X., Zhang, R., Li, M., & Qiao, Z.-A.
- Venue
- Energy Storage Materials
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 23
- Pages
- 678-683
- ISSN
- 2405-8289 (ISSN-L)
- 2405-8297
- OpenAlex
- W2920003283
- Cited by
- 315
- References
- 50
- FWCI
- 9.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.