The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
A review of thermal management for Li-ion batteries: Prospects, challenges, and issues
Open accessAbstract
Abstract Li-ion batteries are essential component in the current generation of electric vehicles. However, further pushing electric vehicles are concerned with battery life. Since the temperature dictates battery lifetime, it is crucial to manage the heat and keep the temperature at an acceptable range within the battery pack. The benefit of a cooling system is to prevent the premature degradation of battery life. This paper provides a critical review of the so far thermal management strategy dealing with temperature within the cells, module, and packs. This paper reviews the advantages and disadvantages of state of the art (traditional) thermal cooling system. In this paper, we have reviewed separately cell, module, and pack level cooling system. The battery thermal modeling techniques and cooling system design challenges are also reviewed. This paper also reviews the future cooling system for future vehicles with rising fast charge rate and these techniques can improve the limitations of the traditional cooling system. This paper also suggests the best suitable and economically viable technology for the upcoming EVs issues.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
IOP Conference Series: Earth and Environmental Science
(2020) · IOP Conference Series Earth and Environmental Science · doi:10.1088/issn.1755-1315 · Cited by 12,764
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945 · cited 1×
“An overview of causes and effects of battery degradation mechanisms and associated degradation modes[93].”
BackgroundReview on modeling of the anode solid electrolyte interphase (SEI) for lithium-ion batteries
Wang, A., Kadam, S., Li, H., Shi, S., & Qi, Y. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0064-0 · Cited by 1,639
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study
Waldmann, T., Wilka, M., Kasper, M., Fleischhammer, M., & Wohlfahrt-Mehrens, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.112 · Cited by 1,203
Jaguemont, J., Boulon, L., & Dubé, Y. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.034 · Cited by 1,188 · cited 1×
“Fossil fuel operated vehicle is not environment friendly as they emit greenhouse gases such as CO2 [1] Li-ion batteries are the best power source for electric vehicle (EV) due to comparatively higher energy density and power density, higher discharge of voltage, higher gravimetric also volumetric energy density with l…”
BackgroundWang, Q., Jiang, B., Li, B., & Yan, Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.033 · Cited by 1,083
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
Comparison of different cooling methods for lithium ion battery cells
Chen, D., Jiang, J., Kim, G.-H., Yang, C., & Pesaran, A. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.015 · Cited by 817
Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity
Mahamud, R., & Park, C. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.02.076 · Cited by 787
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Capacity fade study of lithium-ion batteries cycled at high discharge rates
Ning, G., Haran, B., & Popov, B. N. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00029-6 · Cited by 614
Effect of Temperature on the Aging rate of Li Ion Battery Operating above Room Temperature
Leng, F., Tan, C. M., & Pecht, M. (2015) · Scientific Reports · doi:10.1038/srep12967 · Cited by 607
Design optimization of electric vehicle battery cooling plates for thermal performance
Jarrett, A., & Kim, I. Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.090 · Cited by 560
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Shareef, H., Islam, M. M., & Mohamed, A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.06.033 · Cited by 497
Self-citationIntegration issues of lithium-ion battery into electric vehicles battery pack
Saw, L. H., Ye, Y., & Tay, A. A. O. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.11.011 · Cited by 477
A review on energy management system for fuel cell hybrid electric vehicle: Issues and challenges
Sulaiman, N., Hannan, M. A., Mohamed, A., Majlan, E. H., & Wan Daud, W. R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.07.132 · Cited by 459
Research progress on silicon/carbon composite anode materials for lithium-ion battery
Shen, X., Tian, Z., Fan, R., Shao, L., Zhang, D., Cao, G., Kou, L., & Bai, Y. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2017.12.012 · Cited by 451
Research progress on power battery cooling technology for electric vehicles
Lu, M., Zhang, X., Ji, J., Xu, X., & Zhang, Y. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101155 · Cited by 434
Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
Sato, N. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00478-5 · Cited by 428
The future of lithium availability for electric vehicle batteries
Speirs, J., Contestabile, M., Houari, Y., & Gross, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.04.018 · Cited by 420
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
A review of promising candidate reactions for chemical heat storage
Yan, T., Wang, R. Z., Li, T. X., Wang, L. W., & Fred, I. T. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.015 · Cited by 386
Wang, H., Tao, T., Xu, J., Mei, X., Liu, X., & Gou, P. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115591 · Cited by 380
Electric vehicle battery thermal management system with thermoelectric cooling
Lyu, Y., Siddique, A. R. M., Majid, S. H., Biglarbegian, M., Gadsden, S. A., & Mahmud, S. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.06.016 · Cited by 374
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Ping, P., Peng, R., Kong, D., Chen, G., & Wen, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.025 · Cited by 366
In-Situ Detection of Lithium Plating Using High Precision Coulometry
Burns, J. C., Stevens, D. A., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0621506jes · Cited by 357
A naive Bayes model for robust remaining useful life prediction of lithium-ion battery
Ng, S. S. Y., Xing, Y., & Tsui, K. L. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.12.020 · Cited by 345
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
A comparative study on battery thermal management using phase change material (PCM)
Verma, A., Shashidhara, S., & Rakshit, D. (2019) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2019.03.003 · Cited by 315
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Air and PCM cooling for battery thermal management considering battery cycle life
Chen, F., Huang, R., Wang, C., Yu, X., Liu, H., Wu, Q., Qian, K., & Bhagat, R. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115154 · Cited by 310
Lai, Y., Wu, W., Chen, K., Wang, S., & Xin, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118581 · Cited by 309
A comprehensive review of future thermal management systems for battery-electrified vehicles
Jaguemont, J., & Van Mierlo, J. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101551 · Cited by 304
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
A review on lithium-ion power battery thermal management technologies and thermal safety
An, Z., Jia, L., Ding, Y., Dang, C., & Li, X. (2017) · Journal of Thermal Science · doi:10.1007/s11630-017-0955-2 · Cited by 274
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Mohammadian, S. K., & Zhang, Y. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.09.110 · Cited by 269
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Development of cooling strategy for an air cooled lithium-ion battery pack
Sun, H., & Dixon, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.107 · Cited by 249
Azizi, Y., & Sadrameli, S. M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.081 · Cited by 246
Influence of operating conditions on the optimum design of electric vehicle battery cooling plates
Jarrett, A., & Kim, I. Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.114 · Cited by 245
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method
Ping, P., Wang, Q., Huang, P., Sun, J., & Chen, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.04.092 · Cited by 242
Jhu, C.-Y., Wang, Y.-W., Wen, C.-Y., & Shu, C. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.064 · Cited by 230
Zhang, W., Qiu, J., Yin, X., & Wang, D. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114571 · Cited by 226
Thermal management optimization of a prismatic battery with shape-stabilized phase change material
Wu, W., Wu, W., & Wang, S. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.01.062 · Cited by 222
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 218
Wang, Y., Gao, Q., Wang, G., Lu, P., Zhao, M., & Bao, W. (2018) · International Journal of Energy Research · doi:10.1002/er.4158 · Cited by 216
Modeling capacity fade in lithium-ion cells
Liaw, B. Y., Jungst, R. G., Nagasubramanian, G., Case, H. L., & Doughty, D. H. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.08.017 · Cited by 215
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Liquid cooling based on thermal silica plate for battery thermal management system
Wang, C., Zhang, G., Meng, L., Li, X., Situ, W., Lv, Y., & Rao, M. (2017) · International Journal of Energy Research · doi:10.1002/er.3801 · Cited by 202
Structure optimization of parallel air-cooled battery thermal management system
Chen, K., Wang, S., Song, M., & Chen, L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.04.026 · Cited by 201
Bibin, C., Vijayaram, M., Suriya, V., Sai Ganesh, R., & Soundarraj, S. (2020) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.03.317 · Cited by 197
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
Nitrate salts doped with CuO nanoparticles for thermal energy storage with improved heat transfer
Myers, P. D., Alam, T. E., Kamal, R., Goswami, D. Y., & Stefanakos, E. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.11.045 · Cited by 192
Mohan, G., Venkataraman, M., Gomez-Vidal, J., & Coventry, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.04.100 · Cited by 190
Cao, J., Luo, M., Fang, X., Ling, Z., & Zhang, Z. (2019) · Energy · doi:10.1016/j.energy.2019.116565 · Cited by 188
Neubauer, J., & Wood, E. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.083 · Cited by 184
Putra, N., Sandi, A. F., Ariantara, B., Abdullah, N., & Indra Mahlia, T. M. (2020) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2020.100655 · Cited by 184
HEV battery heating using AC currents
Stuart, T. A., & Hande, A. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.10.014 · Cited by 182
Feng, L., Zhou, S., Li, Y., Wang, Y., Zhao, Q., Luo, C., Wang, G., & Yan, K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.001 · Cited by 182
Low temperature electrolytes for Li-ion PVDF cells
Shiao, H.-C. (., Chua, D., Lin, H.-P., Slane, S., & Salomon, M. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00470-x · Cited by 174 · cited 2×
“In the case of module level cooling, it has been seen that the temperature of the battery should be maintained at the lowest 15°C to the highest 35°C[9].”
BackgroundBudzianowski, W. M. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.08.016 · Cited by 170
Advances in Battery Technologies for Electric Vehicles
(2015) · Elsevier eBooks · doi:10.1016/c2014-0-02665-2 · Cited by 168
Gan, Y., He, L., Liang, J., Tan, M., Xiong, T., & Li, Y. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115740 · Cited by 164
Han, D., Guene Lougou, B., Xu, Y., Shuai, Y., & Huang, X. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114674 · Cited by 155
Tian, H., Du, L., Wei, X., Deng, S., Wang, W., & Ding, J. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.07.027 · Cited by 151
Cen, J., Li, Z., & Jiang, F. (2018) · Energy Sustainable Development/Energy for sustainable development · doi:10.1016/j.esd.2018.05.005 · Cited by 150
Xiao, C., Zhang, G., Li, Z., & Yang, X. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta05247g · Cited by 147
Jouhara, H., Serey, N., Khordehgah, N., Bennett, R. G., Almahmoud, S., & Lester, S. P. (2019) · International Journal of Thermofluids · doi:10.1016/j.ijft.2019.100004 · Cited by 144
Zhang, H., Li, C., Zhang, R., Lin, Y., & Fang, H. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115216 · Cited by 137
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Saw, L. H., Ye, Y., Yew, M. C., Chong, W. T., Yew, M. K., & Ng, T. C. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.04.022 · Cited by 132
Cen, J., & Jiang, F. (2020) · Energy Sustainable Development/Energy for sustainable development · doi:10.1016/j.esd.2020.06.004 · Cited by 128
Ling, Z., Lin, W., Zhang, Z., & Fang, X. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.114120 · Cited by 126
Active cooling based battery thermal management using composite phase change materials
Zhao, Y., Zou, B., Li, C. S., & Ding, Y. (2019) · Energy Procedia · doi:10.1016/j.egypro.2019.01.697 · Cited by 122
Development of an Advanced Two-Dimensional Thermal Model for Large size Lithium-ion Pouch Cells
Samba, A., Omar, N., Gualous, H., Firouz, Y., den Bossche, P. V., Mierlo, J. V., & Tala-Ighil, B. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.11.113 · Cited by 118
Enhanced thermal performance of a thermoelectric generator with phase change materials
Selvam, C., Manikandan, S., Krishna, N. V., Lamba, R., Kaushik, S. C., & Mahian, O. (2020) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2020.104561 · Cited by 97
2020 IEEE Vehicle Power and Propulsion Conference (VPPC)
(2020) · doi:10.1109/vppc49601.2020 · Cited by 94
Ling, Y., Zhang, X., Wang, F., & She, X. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.03.008 · Cited by 91
Karthik, C. A., Kalita, P., Cui, X., & Peng, X. (2020) · Energy Storage · doi:10.1002/est2.137 · Cited by 90
Experimental investigation of a novel hybrid cooling method for lithium-ion batteries
Wei, Y., & Agelin‐Chaab, M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.03.024 · Cited by 85
Zheng, Y., Shi, Y., & Huang, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.090 · Cited by 74
Gou, J., & Liu, W. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.034 · Cited by 68
Introduction to hybrid electric vehicles, battery electric vehicles, and off-road electric vehicles
Herrmann, F., & Rothfuss, F. (2015) · Elsevier eBooks · doi:10.1016/b978-1-78242-377-5.00001-7 · Cited by 58
Paraffin Nanocomposites for Heat Management of Lithium-Ion Batteries: A Computational Investigation
Shirazi, A. H. N., Mohebbi, F., Kakavand, M. R. A., He, B., & Rabczuk, T. (2016) · Journal of Nanomaterials · doi:10.1155/2016/2131946 · Cited by 37
Battery Thermal Management Systems of Electric Vehicles
Li, J., & Zhu, Z. X. (2014) · Chalmers Publication Library (Chalmers University of Technology) · Cited by 32
Cited by
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Yang, Y., Bremner, S., Menictas, C., & Kay, M. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112671 · Cited by 325
Rashidi, S., Karimi, N., Sunden, B., Kim, K. C., Olabi, A. G., & Mahian, O. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100966 · Cited by 266
A state-of-the art review on advancing battery thermal management systems for fast-charging
Kumar Thakur, A., Sathyamurthy, R., Velraj, R., Saidur, R., Pandey, A. K., Ma, Z., Singh, P., Hazra, S. K., Wafa Sharshir, S., Prabakaran, R., et al. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120303 · Cited by 263
Tendera, L., Wycisk, D., Gonzalez, C., Mertin, G. K., Pegel, H., & Birke, K. P. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232120 · Cited by 24
Metadata
- Authors
- Shahjalal, M., Shams, T., Islam, M. E., Alam, W., Modak, M., Hossain, S. B., Ramadesigan, V., Ahmed, M. R., Ahmed, H., & Iqbal, A.
- Venue
- Journal of Energy Storage
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 39
- Pages
- 102518
- ISSN
- 2352-152X (ISSN-L)
- OpenAlex
- W3160703869
- Cited by
- 303
- References
- 108
- FWCI
- 13.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.