CoChat
Sign Up
Cited by 324Battery Modeling and ManagementAdvancements in Battery MaterialsAdvanced Battery Materials and Technologies

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Challenges and development of lithium-ion batteries for low temperature environments

Piao, Nan, Gao, Xuning, Yang, Huicong, Guo, Zhenqiang, Hu, Guangjian, Cheng, Hui-Ming, Li, Feng·2022·eTransportation
DOI 10.1016/j.etran.2021.100145
Open this paper in CoChat — free account

Overview

Integrity signals

Registry

Crossref · 10.1016/j.etran.2021.100145

Cites

0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Flagged first, then by citations

Show all 15 references

Research works printed but not linked: 152

  1. Lu, 2013, A review on the key issues for lithium-ion battery management in electric vehicles, J Power Sources, 226, 272, 10.1016/j.jpowsour.2012.10.060 · DOI · Paper page
  2. Ding, 2019, Automotive Li-ion batteries: current status and future perspectives, Appl Energy, 2, 1
  3. Li, 2019, Degradation mechanisms and mitigation strategies of nickel-rich NMC-based lithium-ion batteries, Electrochem Energy Rev, 3, 43, 10.1007/s41918-019-00053-3 · DOI
  4. Tomaszewska, 2019, Lithium-ion battery fast charging: a review, eTransportation, 1, 100011, 10.1016/j.etran.2019.100011 · DOI · Paper page
  5. Li, 2018, 30 years of lithium-ion batteries, Adv Mater, 30, 1800561, 10.1002/adma.201800561 · DOI
  6. Sharma, 2020, Comparison of common DC and AC bus architectures for EV fast charging stations and impact on power quality, eTransportation, 5, 100066, 10.1016/j.etran.2020.100066 · DOI
  7. Chang, 2020, An aqueous hybrid electrolyte for low-temperature zinc-based energy storage devices, Energy Environ Sci, 13, 3527, 10.1039/D0EE01538E · DOI
  8. Waldmann, 2018, Li plating as unwanted side reaction in commercial Li-ion cells–A review, J Power Sources, 384, 107, 10.1016/j.jpowsour.2018.02.063 · DOI
  9. Aurbach, 2002, A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions, Solid State Ionics, 148, 405, 10.1016/S0167-2738(02)00080-2 · DOI
  10. Jow, 2007, Electrolytes for low temperature operations of Li-ion batteries, ECS Trans, 3, 51, 10.1149/1.2793578 · DOI
  11. Shangguan, 2019, Additive-assisted novel dual-salt electrolyte addresses wide temperature operation of lithium-metal batteries, Small, 15, 1900269, 10.1002/smll.201900269 · DOI · Paper page
  12. Xu, 2019, Functional additives assisted ester-carbonate electrolyte enables wide temperature operation of a high-voltage (5 V-class) Li-ion battery, J Power Sources, 416, 29, 10.1016/j.jpowsour.2019.01.085 · DOI
  13. Guo, 2019, Tailoring low-temperature performance of a lithium-ion battery via rational designing interphase on an anode, ACS Appl Mater Interfaces, 11, 38285, 10.1021/acsami.9b12020 · DOI · Paper page
  14. Wang, 2018, High-voltage LiNi0.45Cr0.1Mn1.45O4 cathode with superlong cycle performance for wide temperature lithium-ion batteries, Adv Funct Mater, 28, 1704808, 10.1002/adfm.201704808 · DOI
  15. Jiang, 2007, Particle size dependence of the lithium storage capability and high rate performance of nanocrystalline anatase TiO2 electrode, J Power Sources, 166, 239, 10.1016/j.jpowsour.2007.01.004 · DOI
  16. Li, 2016, Effect of trace Al surface doping on the structure, surface chemistry and low temperature performance of LiNi0.5Co0.2Mn0.3O2 cathode, Electrochim Acta, 212, 399, 10.1016/j.electacta.2016.07.033 · DOI
  17. Cai, 2020, Rapid lithium diffusion in order@disorder pathways for fast-charging graphite anodes, Small Structures, 1, 2000010, 10.1002/sstr.202000010 · DOI
  18. Kuang, 2019, Thick electrode batteries: principles, opportunities, and challenges, Adv Energy Mater, 9, 1901457, 10.1002/aenm.201901457 · DOI
  19. Billaud, 2016, Magnetically aligned graphite electrodes for high-rate performance Li-ion batteries, Nat Energy, 1, 16097, 10.1038/nenergy.2016.97 · DOI
  20. Wang, 2016, Lithium-ion battery structure that self-heats at low temperatures, Nature, 529, 515, 10.1038/nature16502 · DOI
  21. Yang, 2016, Computational design and refinement of self-heating lithium ion batteries, J Power Sources, 328, 203, 10.1016/j.jpowsour.2016.08.028 · DOI
  22. Yang, 2019, All-climate battery technology for electric vehicles: inching closer to the mainstream adoption of automated driving, IEEE Electrif Mag, 7, 12, 10.1109/MELE.2018.2889545 · DOI
  23. Harting, 2018, Identification of lithium plating in lithium-ion batteries using nonlinear frequency response analysis (NFRA), Electrochim Acta, 281, 378, 10.1016/j.electacta.2018.05.139 · DOI
  24. Petzl, 2014, Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries, J Power Sources, 254, 80, 10.1016/j.jpowsour.2013.12.060 · DOI · Paper page
  25. Anseán, 2017, Operando lithium plating quantification and early detection of a commercial LiFePO4 cell cycled under dynamic driving schedule, J Power Sources, 356, 36, 10.1016/j.jpowsour.2017.04.072 · DOI
  26. Burns, 2015, In-situ detection of lithium plating using high precision coulometry, J Electrochem Soc, 162, A959, 10.1149/2.0621506jes · DOI
  27. Harlow, 2018, Use of asymmetric average charge-and average discharge-voltages as an indicator of the onset of unwanted lithium deposition in lithium-ion cells, J Electrochem Soc, 165, A3595, 10.1149/2.0011816jes · DOI
  28. Hasan, 2015, Analysis of the implications of rapid charging on lithium-ion battery performance, J Electrochem Soc, 162, A1382, 10.1149/2.0871507jes · DOI
  29. Chu, 2017, Non-destructive fast charging algorithm of lithium-ion batteries based on the control-oriented electrochemical model, Appl Energy, 204, 1240, 10.1016/j.apenergy.2017.03.111 · DOI
  30. Wang, 2021, Insights into the deposition chemistry of Li ions in nonaqueous electrolyte for stable Li anodes, Chem Soc Rev, 50, 3178, 10.1039/D0CS01017K · DOI
  31. Cai, 2020, A review on energy chemistry of fast-charging anodes, Chem Soc Rev, 49, 3806, 10.1039/C9CS00728H · DOI
  32. Liu, 2016, Understanding undesirable anode lithium plating issues in lithium-ion batteries, RSC Adv, 6, 88683, 10.1039/C6RA19482F · DOI
  33. Xia, 2018, Thickness-independent capacitance of vertically aligned liquid-crystalline MXenes, Nature, 557, 409, 10.1038/s41586-018-0109-z · DOI
  34. Huang, 2000, The limits of low-temperature performance of Li-ion cells, J Electrochem Soc, 147, 2893, 10.1149/1.1393622 · DOI
  35. Wang, 2016, Superconcentrated electrolytes for a high-voltage lithium-ion battery, Nat Commun, 7, 1
  36. Nian, 2021, Issues and opportunities on low-temperature aqueous batteries, Chem Eng J, 130253, 10.1016/j.cej.2021.130253 · DOI
  37. Väyrynen, 2012, Lithium ion battery production, J Chem Therm, 46, 80, 10.1016/j.jct.2011.09.005 · DOI
  38. Li, 2019, Thermal runaway triggered by plated lithium on the anode after fast charging, ACS Appl Mater Interfaces, 11, 46839, 10.1021/acsami.9b16589 · DOI
  39. Vidal, 2019, xEV Li-ion battery low-temperature effects, IEEE Trans Veh Technol, 68, 4560, 10.1109/TVT.2019.2906487 · DOI · Paper page
  40. Zhang, 2006, Study of the charging process of a LiCoO2-based Li-ion battery, J Power Sources, 160, 1349, 10.1016/j.jpowsour.2006.02.087 · DOI
  41. Lin, 2001, Low-temperature behavior of Li-ion cells, Electrochem Solid State Lett, 4, A71, 10.1149/1.1368736 · DOI · Paper page
  42. Ng, 2020, Low-temperature lithium plating/corrosion hazard in lithium-ion batteries: electrode rippling, variable states of charge, and thermal and nonthermal runaway, ACS Appl Mater Interfaces, 3, 3653
  43. Lyu, 2020, Recent advances of thermal safety of lithium ion battery for energy storage, Energy Storage Mater, 31, 195, 10.1016/j.ensm.2020.06.042 · DOI
  44. Abraham, 2007, Investigating the low-temperature impedance increase of lithium-ion cells, J Electrochem Soc, 155, A41, 10.1149/1.2801366 · DOI
  45. Xu, 2009, Whether EC and PC differ in interphasial chemistry on graphitic anode and how, J Electrochem Soc, 156, A751, 10.1149/1.3166182 · DOI
  46. Rustomji, 2017, Liquefied gas electrolytes for electrochemical energy storage devices, Science, 356, 10.1126/science.aal4263 · DOI
  47. Fan, 2019, All-temperature batteries enabled by fluorinated electrolytes with non-polar solvents, Nat Energy, 4, 882, 10.1038/s41560-019-0474-3 · DOI · Paper page
  48. Xu, 2004, Nonaqueous liquid electrolytes for lithium-based rechargeable batteries, Chem Rev, 104, 4303, 10.1021/cr030203g · DOI
  49. Diederichsen, 2017, Promising routes to a high Li+ transference number electrolyte for lithium ion batteries, ACS Energy Lett, 2, 2563, 10.1021/acsenergylett.7b00792 · DOI
  50. Edward, 1970, Molecular volumes and the Stokes-Einstein equation, J Chem Educ, 47, 261, 10.1021/ed047p261 · DOI
  51. Zhang, 2019, Anion-sorbent composite separators for high-rate lithium-ion batteries, Adv Mater, 31, 1808338, 10.1002/adma.201808338 · DOI
  52. Zhang, 2004, Electrochemical impedance study on the low temperature of Li-ion batteries, Electrochim Acta, 49, 1057, 10.1016/j.electacta.2003.10.016 · DOI
  53. Yamada, 2019, Advances and issues in developing salt-concentrated battery electrolytes, Nat Energy, 4, 269, 10.1038/s41560-019-0336-z · DOI
  54. Suo, 2013, A new class of solvent-in-salt electrolyte for high-energy rechargeable metallic lithium batteries, Nat Commun, 4, 1481, 10.1038/ncomms2513 · DOI
  55. Wang, 2021, Concentrated electrolytes widen the operating temperature range of lithium-ion batteries, Adv Sci, 2101646, 10.1002/advs.202101646 · DOI
  56. Jiang, 2020, Inhibiting solvent co-intercalation in a graphite anode by a localized high-concentration electrolyte in fast-charging batteries, Angew Chem, 133, 3444, 10.1002/ange.202009738 · DOI
  57. Yao, 2021, Regulating interfacial chemistry in lithium-ion batteries by a weakly solvating electrolyte, Angew Chem, 133, 4136, 10.1002/ange.202011482 · DOI
  58. Thenuwara, 2020, Efficient low-temperature cycling of lithium metal anodes by tailoring the solid-electrolyte interphase, ACS Energy Lett, 5, 2411, 10.1021/acsenergylett.0c01209 · DOI · Paper page
  59. Li, 2021, Unraveling the new role of an ethylene carbonate solvation shell in rechargeable metal ion batteries, ACS Energy Lett, 6, 69, 10.1021/acsenergylett.0c02140 · DOI
  60. Ming, 2019, New insight on the role of electrolyte additives in rechargeable lithium ion batteries, ACS Energy Lett, 4, 2613, 10.1021/acsenergylett.9b01441 · DOI
  61. Goodenough, 2010, Challenges for rechargeable Li batteries, Chem Mater, 22, 587, 10.1021/cm901452z · DOI
  62. Fedorov, 2021, Molecular engineering approaches to fabricate artificial solid-electrolyte interphases on anodes for Li-ion batteries: a critical review, Adv Energy Mater, 2101173, 10.1002/aenm.202101173 · DOI
  63. Qian, 2019, How electrolyte additives work in Li-ion batteries, Energy Storage Mater, 20, 208, 10.1016/j.ensm.2018.11.015 · DOI
  64. Emanuel, 1979, The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems–The solid electrolyte interphase model, J Electrochem Soc, 126, 2047, 10.1149/1.2128859 · DOI
  65. Tan, 2021, A growing appreciation for the role of LiF in the solid electrolyte interphase, Adv Energy Mater, 11, 2100046, 10.1002/aenm.202100046 · DOI
  66. Aurbach, 1999, The study of surface film formation on noble-metal electrodes in alkyl carbonates/Li salt solutions, using simultaneous in situ AFM, EQCM, FTIR, and EIS, Langmuir, 15, 2947, 10.1021/la981275j · DOI
  67. Aurbach, 2000, Review of selected electrode-solution interactions which determine the performance of Li and Li ion batteries, J Power Sources, 89, 206, 10.1016/S0378-7753(00)00431-6 · DOI
  68. Xu, 2020, The reduction of interfacial transfer barrier of Li ions enabled by inorganics-rich solid-electrolyte interphase, Energy Storage Mater, 28, 401, 10.1016/j.ensm.2019.12.020 · DOI
  69. Lang, 2019, One-pot solution coating of high quality LiF layer to stabilize Li metal anode, Energy Storage Mater, 16, 85, 10.1016/j.ensm.2018.04.024 · DOI
  70. Piao, 2020, Countersolvent electrolytes for lithium-metal batteries, Adv Energy Mater, 10, 1903568, 10.1002/aenm.201903568 · DOI
  71. Fan, 2018, Highly fluorinated interphases enable high-voltage Li-metal batteries, Inside Chem, 4, 174
  72. Liu, 2021, An inorganic-rich solid electrolyte interphase for advanced lithium-metal batteries in carbonate electrolytes, Angew Chem Int Ed, 60, 3661, 10.1002/anie.202012005 · DOI
  73. Piao, 2021, Lithium metal batteries enabled by synergetic additives in commercial carbonate electrolytes, ACS Energy Lett, 6, 1839, 10.1021/acsenergylett.1c00365 · DOI
  74. Li, 2020, Synergistic dual-additive electrolyte enables practical lithium-metal batteries, Angew Chem Int Ed, 59, 14935, 10.1002/anie.202004853 · DOI
  75. Yamada, 2013, A superconcentrated ether electrolyte for fast-charging Li-ion batteries, Chem Commun, 49, 11194, 10.1039/c3cc46665e · DOI
  76. Zhang, 2019, Regulating anions in the solvation sheath of lithium ions for stable lithium metal batteries, ACS Energy Lett, 4, 411, 10.1021/acsenergylett.8b02376 · DOI
  77. Suo, 2018, Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries, Proc Natl Acad Sci Unit States Am, 115, 1156, 10.1073/pnas.1712895115 · DOI
  78. Wu, 2013, Carbon-nanotube-decorated nano-LiFePO4@C cathode material with superior high-rate and low-temperature performances for lithium-ion batteries, Adv Energy Mater, 3, 1155, 10.1002/aenm.201300159 · DOI
  79. Sivakkumar, 2010, Rate capability of graphite materials as negative electrodes in lithium-ion capacitors, Electrochim Acta, 55, 3330, 10.1016/j.electacta.2010.01.059 · DOI
  80. Zhao, 2016, Effect of particle size and purity on the low temperature electrochemical performance of LiFePO4/C cathode material, J Alloys Compd, 683, 123, 10.1016/j.jallcom.2016.04.070 · DOI · Paper page
  81. Cui, 2016, Optimized temperature effect of Li-ion diffusion with layer distance in Li(NixMnyCoz)O2 cathode materials for high performance Li-ion battery, Adv Energy Mater, 6, 1501309, 10.1002/aenm.201501309 · DOI
  82. Kou, 2015, Role of cobalt content in improving the low-temperature performance of layered lithium-rich cathode materials for lithium-ion batteries, ACS Appl Mater Interfaces, 7, 17910, 10.1021/acsami.5b04514 · DOI
  83. Lee, 2021, A cooperative biphasic MoOx-MoPx promoter enables a fast-charging lithium-ion battery, Nat Commun, 12, 39, 10.1038/s41467-020-20297-8 · DOI
  84. Shi, 2011, Nanosized Li4Ti5O12/graphene hybrid materials with low polarization for high rate lithium ion batteries, J Power Sources, 196, 8610, 10.1016/j.jpowsour.2011.06.002 · DOI
  85. Rui, 2011, A comparative study on the low-temperature performance of LiFePO4/C and Li3V2(PO4)3/C cathodes for lithium-ion batteries, J Power Sources, 196, 2109, 10.1016/j.jpowsour.2010.10.063 · DOI
  86. Kim, 2020, Ultrafast kinetics in a phase separating electrode material by forming an intermediate phase without reducing the particle size, Energy Environ Sci, 13, 4258, 10.1039/D0EE02518F · DOI
  87. Zheng, 2017, Electrolyte additive enabled fast charging and stable cycling lithium metal batteries, Nat Energy, 2, 17012, 10.1038/nenergy.2017.12 · DOI
  88. Yan, 2018, Lithium nitrate solvation chemistry in carbonate electrolyte sustains high-voltage lithium metal batteries, Angew Chem, 130, 14251, 10.1002/ange.201807034 · DOI
  89. Yao, 2020, A compact inorganic layer for robust anode protection in lithium-sulfur batteries, InfoMat, 2, 379, 10.1002/inf2.12046 · DOI
  90. Liang, 2017, A facile surface chemistry route to a stabilized lithium metal anode, Nat Energy, 2, 17119, 10.1038/nenergy.2017.119 · DOI
  91. Lin, 2016, Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes, Nat Nanotechnol, 11, 626, 10.1038/nnano.2016.32 · DOI
  92. Liu, 2016, Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode, Nat Commun, 7, 10992, 10.1038/ncomms10992 · DOI
  93. Varzi, 2018, 3D porous Cu-Zn alloys as alternative anode materials for Li-ion batteries with superior low t performance, Adv Energy Mater, 8, 1701706, 10.1002/aenm.201701706 · DOI
  94. Dong, 2020, A high-rate and long-life rechargeable battery operated at -75 °C, Batteries & Supercaps, 3, 1016, 10.1002/batt.202000117 · DOI
  95. Cai, 2020, An ester electrolyte for lithium-sulfur batteries capable of ultra-low temperature cycling, Chem Commun, 56, 9114, 10.1039/D0CC03798B · DOI
  96. Gao, 2020, Low-temperature and high-rate-charging lithium metal batteries enabled by an electrochemically active monolayer-regulated interface, Nat Energy, 5, 534, 10.1038/s41560-020-0640-7 · DOI · Paper page
  97. Yan, 2016, Nano-Sn embedded in expanded graphite as anode for lithium ion batteries with improved low temperature electrochemical performance, Electrochim Acta, 187, 186, 10.1016/j.electacta.2015.11.015 · DOI · Paper page
  98. Mancini, 2009, Lithium intercalation and interfacial kinetics of composite anodes formed by oxidized graphite and copper, J Power Sources, 190, 141, 10.1016/j.jpowsour.2008.10.084 · DOI
  99. Hou, 2020, Fundamentals and challenges of lithium ion batteries at temperatures between -40 and 60 °C, Adv Energy Mater, 10, 1904152, 10.1002/aenm.201904152 · DOI
  100. Liu, 2005, Enhanced cycle life of Si anode for Li-ion batteries by using modified elastomeric binder, Electrochem Solid State Lett, 8, A100, 10.1149/1.1847685 · DOI
  101. Ji, 2013, Heating strategies for Li-ion batteries operated from subzero temperatures, Electrochim Acta, 107, 664, 10.1016/j.electacta.2013.03.147 · DOI
  102. Wu, 2020, The state of the art on preheating lithium-ion batteries in cold weather, J Energy Storage, 27, 101059, 10.1016/j.est.2019.101059 · DOI
  103. Qin, 2020, Battery thermal management system based on the forced-air convection: a review, eTransportation, 100097
  104. Wang, 2016, A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles, Renew Sustain Energy Rev, 64, 106, 10.1016/j.rser.2016.05.033 · DOI
  105. Luo, 2021, Phase change material coat for battery thermal management with integrated rapid heating and cooling functions from -40 °C to 50 °C, Materials Today Energy, 20, 100652, 10.1016/j.mtener.2021.100652 · DOI
  106. Zhang, 2017, Heating character of a LiMn2O4 battery pack at low temperature based on PTC and metallic resistance material, Energy Procedia, 105, 2131, 10.1016/j.egypro.2017.03.602 · DOI
  107. Liu, 2015, vol. 1, 25
  108. Li, 2021, Drive circuitry of an electric vehicle enabling rapid heating of the battery pack at low temperatures, Iscience, 24, 101921, 10.1016/j.isci.2020.101921 · DOI
  109. Wu, 2020, Capacity degradation minimization oriented optimization for the pulse preheating of lithium-ion batteries under low temperature, J Energy Storage, 31, 101746, 10.1016/j.est.2020.101746 · DOI
  110. Zhang, 2015, Internal heating of lithium-ion batteries using alternating current based on the heat generation model in frequency domain, J Power Sources, 273, 1030, 10.1016/j.jpowsour.2014.09.181 · DOI
  111. Ge, 2015, Temperature-adaptive alternating current preheating of lithium-ion batteries with lithium deposition prevention, J Electrochem Soc, 163, A290, 10.1149/2.0961602jes · DOI
  112. Shang, 2017, An automotive onboard AC heater without external power supplies for lithium-ion batteries at low temperatures, IEEE Trans Power Electron, 33, 7759, 10.1109/TPEL.2017.2768661 · DOI
  113. Qin, 2020, A rapid lithium-ion battery heating method based on bidirectional pulsed current: heating effect and impact on battery life, Appl Energy, 280, 115957, 10.1016/j.apenergy.2020.115957 · DOI
  114. Gupta, 2020, Designing advanced lithium-based batteries for low-temperature conditions, Adv Energy Mater, 10, 2001972, 10.1002/aenm.202001972 · DOI · Paper page
  115. Lei, 2018, Temperature uniformity of a heated lithium-ion battery cell in cold climate, Appl Therm Eng, 129, 148, 10.1016/j.applthermaleng.2017.09.100 · DOI
  116. Wang, 2013, Design of electric air-heated box for batteries in electric vehicles, Chin J Power Sources, 37, 1184
  117. Gang, 2017, Design research on battery heating and preservation system based on liquid cooling mode, J Hunan Univ, 44, 26
  118. Alaoui, 2005, A novel thermal management for electric and hybrid vehicles, IEEE Trans Veh Technol, 54, 468, 10.1109/TVT.2004.842444 · DOI
  119. Zhang, 2017, PTC self-heating experiments and thermal modeling of lithium-ion battery pack in electric vehicles, Energies, 10, 572, 10.3390/en10040572 · DOI
  120. Qu, 2019, Experimental study on pulse self-heating of lithium-ion battery at low temperature, Int J Heat Mass Tran, 135, 696, 10.1016/j.ijheatmasstransfer.2019.02.020 · DOI
  121. Jiang, 2018, A low-temperature internal heating strategy without lifetime reduction for large-size automotive lithium-ion battery pack, Appl Energy, 230, 257, 10.1016/j.apenergy.2018.08.070 · DOI
  122. Wu, 2020, Preheating strategy of variable-frequency pulse for lithium battery in cold weather, Int J Energy Res, 44, 10724, 10.1002/er.5715 · DOI
  123. Richardson, 2014, Battery internal temperature estimation by combined impedance and surface temperature measurement, J Power Sources, 265, 254, 10.1016/j.jpowsour.2014.04.129 · DOI
  124. Vishwakarma, 2014, Measurement of in-plane thermal conductivity and heat capacity of separator in Li-ion cells using a transient DC heating method, J Power Sources, 272, 378, 10.1016/j.jpowsour.2014.08.066 · DOI
  125. Li, 2013, Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples, J Power Sources, 241, 536, 10.1016/j.jpowsour.2013.04.117 · DOI
  126. Novais, 2016, Internal and external temperature monitoring of a Li-ion battery with fiber Bragg grating sensors, Sensors, 16, 1394, 10.3390/s16091394 · DOI
  127. Wang, 2020, A review of modeling, acquisition, and application of lithium-ion battery impedance for onboard battery management, eTransportation, 100093
  128. Sun, 2015, Online internal temperature estimation for lithium-ion batteries based on Kalman filter, Energies, 8, 4400, 10.3390/en8054400 · DOI
  129. Petzl, 2015, Lithium plating in a commercial lithium-ion battery–A low-temperature aging study, J Power Sources, 275, 799, 10.1016/j.jpowsour.2014.11.065 · DOI · Paper page
  130. Wang, 2020, Underpotential lithium plating on graphite anodes caused by temperature heterogeneity, Proc Natl Acad Sci Unit States Am, 117, 29453, 10.1073/pnas.2009221117 · DOI
  131. Fernández, 2013, Capacity fade and aging models for electric batteries and optimal charging strategy for electric vehicles, Energy, 60, 35, 10.1016/j.energy.2013.07.068 · DOI
  132. Yamaki, 1998, A consideration of the morphology of electrochemically deposited lithium in an organic electrolyte, J Power Sources, 74, 219, 10.1016/S0378-7753(98)00067-6 · DOI
  133. Sieg, 2019, Fast charging of an electric vehicle lithium-ion battery at the limit of the lithium deposition process, J Power Sources, 427, 260, 10.1016/j.jpowsour.2019.04.047 · DOI
  134. Cabañero, 2019, Investigation of the temperature dependence of lithium plating onset conditions in commercial Li-ion batteries, Energy, 171, 1217, 10.1016/j.energy.2019.01.017 · DOI
  135. Koleti, 2020, A new on-line method for lithium plating detection in lithium-ion batteries, J Power Sources, 451, 227798, 10.1016/j.jpowsour.2020.227798 · DOI
  136. Waldmann, 2014, Temperature dependent ageing mechanisms in lithium-ion batteries–A post-mortem study, J Power Sources, 262, 129, 10.1016/j.jpowsour.2014.03.112 · DOI
  137. Ren, 2018, Investigation of lithium plating-stripping process in Li-ion batteries at low temperature using an electrochemical model, J Electrochem Soc, 165, A2167, 10.1149/2.0661810jes · DOI
  138. Ye, 2013, Simulation and evaluation of capacity recovery methods for spiral-wound lithium ion batteries, J Power Sources, 243, 779, 10.1016/j.jpowsour.2013.06.083 · DOI
  139. Jokar, 2016, Review of simplified pseudo-two-dimensional models of lithium-ion batteries, J Power Sources, 327, 44, 10.1016/j.jpowsour.2016.07.036 · DOI
  140. Santhanagopalan, 2006, Review of models for predicting the cycling performance of lithium ion batteries, J Power Sources, 156, 620, 10.1016/j.jpowsour.2005.05.070 · DOI
  141. Zhe, 2019, Applications of ultrasound technique in characterization of lithium-ion batteries, Energy Storage Sci Tech, 8, 1033
  142. Chang, 2021, Operando 2D acoustic characterization of lithium-ion battery spatial dynamics, ACS Energy Lett, 6, 2960, 10.1021/acsenergylett.1c01324 · DOI
  143. Downie, 2013, In situ detection of lithium plating on graphite electrodes by electrochemical calorimetry, J Electrochem Soc, 160, A588, 10.1149/2.049304jes · DOI
  144. Jones, 2020, The effect of electrolyte additives upon lithium plating during low temperature charging of graphite-LiNiCoAlO2 lithium-ion three electrode cells, J Electrochem Soc, 167, 10.1149/1945-7111/ab6bc2 · DOI
  145. Liu, 2021, Lithium-plating-free fast charging of large-format lithium-ion batteries with reference electrodes, Int J Energy Res, 45, 7918, 10.1002/er.6375 · DOI
  146. Cabañero, 2021, In-operando Raman study of lithium plating on graphite electrodes of lithium ion batteries, Electrochim Acta, 374, 137487, 10.1016/j.electacta.2020.137487 · DOI
  147. von Lüders, 2017, Lithium plating in lithium-ion batteries investigated by voltage relaxation and in situ neutron diffraction, J Power Sources, 342, 17, 10.1016/j.jpowsour.2016.12.032 · DOI
  148. Wen, 2019, Smart materials and design toward safe and durable lithium ion batteries, Small Methods, 3, 1900323, 10.1002/smtd.201900323 · DOI
  149. Wu, 2014, Improving battery safety by early detection of internal shorting with a bifunctional separator, Nat Commun, 5, 5193, 10.1038/ncomms6193 · DOI
  150. Keil, 2016, Charging protocols for lithium-ion batteries and their impact on cycle life–An experimental study with different 18650 high-power cells, J Energy Storage, 6, 125, 10.1016/j.est.2016.02.005 · DOI
  151. Zhang, 2006, The effect of the charging protocol on the cycle life of a Li-ion battery, J Power Sources, 161, 1385, 10.1016/j.jpowsour.2006.06.040 · DOI
  152. Notten, 2005, Boostcharging Li-ion batteries: a challenging new charging concept, J Power Sources, 145, 89, 10.1016/j.jpowsour.2004.12.038 · DOI

Cited by

Sorted by citations

Items 101–200 of 285

Metadata

Authors
Piao, N., Gao, X., Yang, H., Guo, Z., Hu, G., Cheng, H.-M., & Li, F.
Affiliations
  • Chinese Academy of Sciences (CN)
  • University of Science and Technology of China (CN)
Corresponding author
  • Hu, Guangjian
  • Li, Feng
ORCID
Venue
eTransportation
Publisher
Elsevier BV
Published
2022-02
Volume
11
Pages
100145
ISSN
2590-1168 (ISSN-L)
DOI
10.1016/j.etran.2021.100145
OpenAlex
W3212816583
Cited by
324
References
170
Citations by year
2026: 53 · 2025: 89 · 2024: 85 · 2023: 66 · 2022: 31
FWCI
14.78
Type
journal article
Language
en
Open access
closed
Licence
Locations
eTransportation (publishedVersion)
Funders
National Natural Science Foundation of China
Topics
  • Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
Keywords
lithium-ion batteries, low-temperature performance, low-temperature kinetics, battery thermal management, charging protocols, lithium plating, battery management systems, battery safety

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review