The DOI matches its Crossref record; 186 of the 186 references it cites were found in a registry or an index.
Current technologies for plastic waste treatment: A review
Abstract
Abstract Conventional nonbiodegradable plastic waste (NPW) treatment technologies include landfill and incineration, which face bottlenecks and cannot solve NPW problems effectively. Therefore, many advanced NPW treatment technologies have been reported. This review summarizes currently reported advanced NPW treatment technologies, analyzes their mechanisms and development status, and proposes an outlook for their industrial application based on the gap between the current development status and industry requirements. The technologies are introduced based on basic classification into two strategies: recycling and degradation. Recycling technologies are further categorized into three subtypes: physical recycling, energy recovery, and resource recovery. Degradation technologies are further categorized into two subtypes: biodegradation and oxo-biodegradation. Oxo-biodegradation is divided into abiotic degradation and biotic degradation. Abiotic degradation includes photodegradation, thermodegradation, mechanochemical degradation and other degradation techniques. The mechanisms for pyrolysis and photodegradation are systematically summarized. The purpose of this review is to provide readers with a comprehensive introduction to various advanced NPW treatment technologies, which can enable readers to understand the development status and outlook of the technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
The contribution of outdoor air pollution sources to premature mortality on a global scale
Lelieveld, J., Evans, J. S., Fnais, M., Giannadaki, D., & Pozzer, A. (2015) · Nature · doi:10.1038/nature15371 · Cited by 5,977
Encyclopedia of polymer science and engineering
Mark, H., & Kroschwitz, J. I. (1985) · Wiley eBooks · Cited by 5,898
Encyclopedia of polymer science and engineering
Bawn, C. S. H. (1987) · Polymer · doi:10.1016/0032-3861(87)90274-6 · Cited by 4,203
A bacterium that degrades and assimilates poly(ethylene terephthalate)
Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016) · Science · doi:10.1126/science.aad6359 · Cited by 3,367
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Elements of chemical reaction engineering
Scott Fogler, H. (1987) · Chemical Engineering Science · doi:10.1016/0009-2509(87)80130-6 · Cited by 3,110
Transport and release of chemicals from plastics to the environment and to wildlife
Teuten, E. L., Saquing, J. M., Knappe, D. R. U., Barlaz, M. A., Jonsson, S., Björn, A., Rowland, S. J., Thompson, R. C., Galloway, T. S., Yamashita, R., et al. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0284 · Cited by 2,938
Biological degradation of plastics: A comprehensive review
Shah, A. A., Hasan, F., Hameed, A., & Ahmed, S. (2008) · Biotechnology Advances · doi:10.1016/j.biotechadv.2007.12.005 · Cited by 2,765
Recycling and recovery routes of plastic solid waste (PSW): A review
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2009) · Waste Management · doi:10.1016/j.wasman.2009.06.004 · Cited by 2,404
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Ullmann's encyclopedia of industrial chemistry
Peters, A. T. (1988) · Dyes and Pigments · doi:10.1016/0143-7208(88)80015-9 · Cited by 1,751
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
Haider, T. P., Völker, C., Kramm, J., Landfester, K., & Wurm, F. R. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201805766 · Cited by 1,591
Mechanistic implications of plastic degradation
Singh, B., & Sharma, N. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.11.008 · Cited by 1,569
Photodegradation and photostabilization of polymers, especially polystyrene: review
Yousif, E., & Haddad, R. (2013) · SpringerPlus · doi:10.1186/2193-1801-2-398 · Cited by 1,503
Polymer biodegradation: Mechanisms and estimation techniques – A review
Lucas, N., Bienaime, C., Belloy, C., Queneudec, M., Silvestre, F., & Nava-Saucedo, J.-E. (2008) · Chemosphere · doi:10.1016/j.chemosphere.2008.06.064 · Cited by 1,384
The future of plastics recycling
Garcia, J. M., & Robertson, M. L. (2017) · Science · doi:10.1126/science.aaq0324 · Cited by 1,346
Oliveux, G., Dandy, L. O., & Leeke, G. A. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.01.004 · Cited by 1,287
A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)
Al-Salem, S. M., Antelava, A., Constantinou, A., Manos, G., & Dutta, A. (2017) · Journal of Environmental Management · doi:10.1016/j.jenvman.2017.03.084 · Cited by 1,200
Carbon–Carbon Bond Forming Reactions via Photogenerated Intermediates
Ravelli, D., Protti, S., & Fagnoni, M. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00662 · Cited by 1,109
Yang, J., Yang, Y., Wu, W.-M., Zhao, J., & Jiang, L. (2014) · Environmental Science & Technology · doi:10.1021/es504038a · Cited by 1,022
50th Anniversary Perspective: There Is a Great Future in Sustainable Polymers
Schneiderman, D. K., & Hillmyer, M. A. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00293 · Cited by 1,003
New Insights into the Aging Behavior of Microplastics Accelerated by Advanced Oxidation Processes
Liu, P., Qian, L., Wang, H., Zhan, X., Lu, K., Gu, C., & Gao, S. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.9b00493 · Cited by 970
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Panda, A. K., Singh, R. K., & Mishra, D. K. (2010) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2009.07.005 · Cited by 956
Pet Waste Management by Chemical Recycling: A Review
Sinha, V., Patel, M. R., & Patel, J. V. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0106-7 · Cited by 853
Methods for polyurethane and polyurethane composites, recycling and recovery: A review
Zia, K. M., Bhatti, H. N., & Ahmad Bhatti, I. (2007) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2007.05.004 · Cited by 786
Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP)
Achilias, D. S., Roupakias, C., Megalokonomos, P., Lappas, A. A., & Antonakou, Ε. V. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.06.076 · Cited by 730
Yang, Y., Yang, J., Wu, W.-M., Zhao, J., Song, Y., Gao, L., Yang, R., & Jiang, L. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02661 · Cited by 720
Biodegradation of polyurethane: a review
Howard, G. T. (2002) · International Biodeterioration & Biodegradation · doi:10.1016/s0964-8305(02)00051-3 · Cited by 711
Yang, Y., Yang, J., Wu, W.-M., Zhao, J., Song, Y., Gao, L., Yang, R., & Jiang, L. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02663 · Cited by 710
New concepts in biomass gasification
Heidenreich, S., & Foscolo, P. U. (2015) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.06.002 · Cited by 709
Current state and future prospects of plastic waste as source of fuel: A review
Wong, S. L., Ngadi, N., Abdullah, T. A. T., & Inuwa, I. M. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.063 · Cited by 695
Onwudili, J. A., Insura, N., & Williams, P. T. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.07.008 · Cited by 681
Pyrolysis technologies for municipal solid waste: A review
Chen, D., Yin, L., Wang, H., & He, P. (2014) · Waste Management · doi:10.1016/j.wasman.2014.08.004 · Cited by 674
Biodegradation of polyethylene by the thermophilic bacterium Brevibacillus borstelensis
Hadad, D., Geresh, S., & Sivan, A. (2005) · Journal of Applied Microbiology · doi:10.1111/j.1365-2672.2005.02553.x · Cited by 653
Biomass gasification for electricity generation: Review of current technology barriers
Ruiz, J. A., Juárez, M. C., Morales, M. P., Muñoz, P., & Mendívil, M. A. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.021 · Cited by 627
An overview of degradable and biodegradable polyolefins
Ammala, A., Bateman, S., Dean, K., Petinakis, E., Sangwan, P., Wong, S., Yuan, Q., Yu, L., Patrick, C., & Leong, K. H. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.002 · Cited by 595
Brandon, A. M., Gao, S.-H., Tian, R., Ning, D., Yang, S.-S., Zhou, J., Wu, W.-M., & Criddle, C. S. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02301 · Cited by 576
Cai, L., Wang, J., Peng, J., Wu, Z., & Tan, X. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.079 · Cited by 575
Polymer degradation and stabilisation
McNeill, I. C. (1986) · Endeavour · doi:10.1016/0160-9327(86)90072-4 · Cited by 547
Harshvardhan, K., & Jha, B. (2013) · Marine Pollution Bulletin · doi:10.1016/j.marpolbul.2013.10.025 · Cited by 542
Zhang, K., Shi, H., Peng, J., Wang, Y., Xiong, X., Wu, C., & Lam, P. K. S. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.300 · Cited by 534
Al-Salem, S. M., Lettieri, P., & Baeyens, J. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.09.001 · Cited by 528
Polyethylene bio-degradation by caterpillars of the wax moth Galleria mellonella
Bombelli, P., Howe, C. J., & Bertocchini, F. (2017) · Current Biology · doi:10.1016/j.cub.2017.02.060 · Cited by 523
Raheem, A. B., Noor, Z. Z., Hassan, A., Abd Hamid, M. K., Samsudin, S. A., & Sabeen, A. H. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.019 · Cited by 496
A review on tertiary recycling of high-density polyethylene to fuel
Kumar, S., Panda, A. K., & Singh, R. K. (2011) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2011.05.005 · Cited by 493
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., Adrados, A., & Aranzabal, A. (2011) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2011.03.030 · Cited by 479
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015) · International Journal of Green Energy · doi:10.1080/15435075.2014.880146 · Cited by 463
Microbial degradation of low density polyethylene (LDPE): a review
Kumar Sen, S., & Raut, S. (2015) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2015.01.003 · Cited by 456
Recycling of bioplastics, their blends and biocomposites: A review
Soroudi, A., & Jakubowicz, I. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.025 · Cited by 432
Jiao, X., Zheng, K., Chen, Q., Li, X., Li, Y., Shao, W., Xu, J., Zhu, J., Pan, Y., Sun, Y., et al. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201915766 · Cited by 419
Chatani, S., Kloxin, C. J., & Bowman, C. N. (2014) · Polym. Chem. · doi:10.1039/c3py01334k · Cited by 408
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Moharir, R. V., & Kumar, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.059 · Cited by 392
Syamsiro, M., Saptoadi, H., Norsujianto, T., Noviasri, P., Cheng, S., Alimuddin, Z., & Yoshikawa, K. (2014) · Energy Procedia · doi:10.1016/j.egypro.2014.01.212 · Cited by 389
Peng, B.-Y., Su, Y., Chen, Z., Chen, J., Zhou, X., Benbow, M. E., Criddle, C. S., Wu, W.-M., & Zhang, Y. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.8b06963 · Cited by 389
A circular economy approach to plastic waste
Payne, J., McKeown, P., & Jones, M. D. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.05.014 · Cited by 385
MacArthur, E. (2017) · Science · doi:10.1126/science.aao6749 · Cited by 371
Evaluation of HDPE and LDPE degradation by fungus, implemented by statistical optimization
Ojha, N., Pradhan, N., Singh, S., Barla, A., Shrivastava, A., Khatua, P., Rai, V., & Bose, S. (2017) · Scientific Reports · doi:10.1038/srep39515 · Cited by 361
Polymer degradation and stabilization
Billingham, N. C. (1986) · Polymer · doi:10.1016/0032-3861(86)90057-1 · Cited by 356
The combustion of organic polymers
Drysdale, D. D. (1981) · Fire Safety Journal · doi:10.1016/0379-7112(81)90020-5 · Cited by 349
Mastral, F. J., Esperanza, E., Garcı́a, P., & Juste, M. (2002) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(01)00137-1 · Cited by 346
The combustion of organic polymers
Cullis, C. F., & Hirschler, M. M. (1981) · Oxford University Press eBooks · Cited by 339
Polymer Recycling: Science, Technology and Applications
Scheirs, J. (1998) · Medical Entomology and Zoology · Cited by 338
Marcilla, A., Beltrán, M. I., & Navarro, R. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2008.07.026 · Cited by 333
Impacts of plastic products used in daily life on the environment and human health: What is known?
Rodrigues, M. O., Abrantes, N., Gonçalves, F. J. M., Nogueira, H., Marques, J. C., & Gonçalves, A. M. M. (2019) · Environmental Toxicology and Pharmacology · doi:10.1016/j.etap.2019.103239 · Cited by 327
Sharma, B. K., Moser, B. R., Vermillion, K. E., Doll, K. M., & Rajagopalan, N. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.01.019 · Cited by 322
Biodegradation and mineralization of polystyrene by plastic-eating superworms Zophobas atratus
Yang, Y., Wang, J., & Xia, M. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135233 · Cited by 322
Miskolczi, N., Angyal, A., Bartha, L., & Valkai, I. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.04.019 · Cited by 315
Carlsson, D. J., & Wiles, D. M. (1976) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321797608076113 · Cited by 314
Buekens, A. G., & Huang, H. (1998) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(98)00025-1 · Cited by 307
Polyvinyl chloride biodegradation by Pseudomonas citronellolis and Bacillus flexus
Giacomucci, L., Raddadi, N., Soccio, M., Lotti, N., & Fava, F. (2019) · New Biotechnology · doi:10.1016/j.nbt.2019.04.005 · Cited by 302
Biodegradation of polyester polyurethane by Aspergillus tubingensis
Khan, S., Nadir, S., Shah, Z. U., Shah, A. A., Karunarathna, S. C., Xu, J., Khan, A., Munir, S., & Hasan, F. (2017) · Environmental Pollution · doi:10.1016/j.envpol.2017.03.012 · Cited by 300
Ding, K., Liu, S., Huang, Y., Liu, S., Zhou, N., Peng, P., Wang, Y., Chen, P., & Ruan, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.07.001 · Cited by 294
Yang, S.-S., Brandon, A. M., Andrew Flanagan, J. C., Yang, J., Ning, D., Cai, S.-Y., Fan, H.-Q., Wang, Z.-Y., Ren, J., Benbow, E., et al. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2017.10.117 · Cited by 293
Microbial assisted High Impact Polystyrene (HIPS) degradation
Mohan, A. J., Sekhar, V. C., Bhaskar, T., & Nampoothiri, K. M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.03.021 · Cited by 280
Evaluation of degradability of biodegradable polyethylene (PE)
Jakubowicz, I. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(02)00380-4 · Cited by 278
Adrados, A., de Marco, I., Caballero, B. M., López, A., Laresgoiti, M. F., & Torres, A. (2012) · Waste Management · doi:10.1016/j.wasman.2011.06.016 · Cited by 275
Plastic waste as a fuel - CO2-neutral or not?
Eriksson, O., & Finnveden, G. (2009) · Energy & Environmental Science · doi:10.1039/b908135f · Cited by 272
Degradable Polyethylene: Fantasy or Reality
Roy, P. K., Hakkarainen, M., Varma, I. K., & Albertsson, A.-C. (2011) · Environmental Science & Technology · doi:10.1021/es104042f · Cited by 264
Liu, R., Sarker, M., Rahman, M. M., Li, C., Chai, M., Nishu, Cotillon, R., & Scott, N. R. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100852 · Cited by 264
Current approaches to waste polymer utilization and minimization: a review
Okan, M., Aydin, H. M., & Barsbay, M. (2019) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.5778 · Cited by 263
Cracking of High Density Polyethylene Pyrolysis Waxes on HZSM-5 Catalysts of Different Acidity
Artetxe, M., Lopez, G., Amutio, M., Elordi, G., Bilbao, J., & Olazar, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4014869 · Cited by 250
Photostabilization of coatings. Mechanisms and performance
Pospı́šil, J., & Nešpurek, S. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00029-0 · Cited by 249
Astrup, T., Møller, J., & Fruergaard, T. (2009) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x09343774 · Cited by 243
Hydrocracking of virgin and waste plastics: A detailed review
Munir, D., Irfan, M. F., & Usman, M. R. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.034 · Cited by 237
Kundungal, H., Gangarapu, M., Sarangapani, S., Patchaiyappan, A., & Devipriya, S. P. (2019) · Environmental Science and Pollution Research · doi:10.1007/s11356-019-05038-9 · Cited by 237
Evaluation of pyrolysis process parameters on polypropylene degradation products
Abbas-Abadi, M. S., Haghighi, M. N., Yeganeh, H., & McDonald, A. G. (2014) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2014.05.023 · Cited by 235
Seo, Y.-H., Lee, K.-H., & Shin, D.-H. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00186-9 · Cited by 233
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.067 · Cited by 232
Chiellini, E., Corti, A., D'Antone, S., & Baciu, R. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.03.022 · Cited by 231
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.01.009 · Cited by 230
Khabbaz, F., Albertsson, A.-C., & Karlsson, S. (1999) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(98)00082-2 · Cited by 229
Tang, Z., Li, W., Tam, V. W. Y., & Xue, C. (2020) · Resources, Conservation & Recycling: X · doi:10.1016/j.rcrx.2020.100036 · Cited by 227
Bio-effects and safety of low-intensity, low-frequency ultrasonic exposure
Ahmadi, F., McLoughlin, I. V., Chauhan, S., & ter-Haar, G. (2012) · Progress in Biophysics and Molecular Biology · doi:10.1016/j.pbiomolbio.2012.01.004 · Cited by 224
Yang, S.-S., Wu, W.-M., Brandon, A. M., Fan, H.-Q., Receveur, J. P., Li, Y., Wang, Z.-Y., Fan, R., McClellan, R. L., Gao, S.-H., et al. (2018) · Chemosphere · doi:10.1016/j.chemosphere.2018.08.078 · Cited by 224
Plastic Solid Waste (PSW) in the Context of Life Cycle Assessment (LCA) and Sustainable Management
Antelava, A., Damilos, S., Hafeez, S., Manos, G., Al-Salem, S. M., Sharma, B. K., Kohli, K., & Constantinou, A. (2019) · Environmental Management · doi:10.1007/s00267-019-01178-3 · Cited by 222
Biodegradation of gamma irradiated low density polyethylene and polypropylene by endophytic fungi
Sheik, S., Chandrashekar, K. R., Swaroop, K., & Somashekarappa, H. M. (2015) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2015.08.006 · Cited by 220
Solid-phase photocatalytic degradation of polystyrene plastic with TiO2 as photocatalyst
Shang, J., Chai, M., & Zhu, Y. (2003) · Journal of Solid State Chemistry · doi:10.1016/s0022-4596(03)00183-x · Cited by 219
Gibb, B. C. (2019) · Nature Chemistry · doi:10.1038/s41557-019-0260-7 · Cited by 217
Polyolefins with controlled environmental degradability
Wiles, D. M., & Scott, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.09.010 · Cited by 214
Peng, B.-Y., Li, Y., Fan, R., Chen, Z., Chen, J., Brandon, A. M., Criddle, C. S., Zhang, Y., & Wu, W.-M. (2020) · Environmental Pollution · doi:10.1016/j.envpol.2020.115206 · Cited by 213
(1999) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(99)96253-7 · Cited by 209
Depolymerization Mechanism of Poly(ethylene terephthalate) in Supercritical Methanol
Genta, M., Iwaya, T., Sasaki, M., Goto, M., & Hirose, T. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0488187 · Cited by 206
Synergistic effects of pretreatment and blending on fungi mediated biodegradation of polypropylenes
Jeyakumar, D., Chirsteen, J., & Doble, M. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.074 · Cited by 203
Effect of pressure on thermal degradation of polyethylene
Murata, K., Sato, K., & Sakata, Y. (2004) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2003.08.010 · Cited by 195
Fan, L., Zhang, Y., Liu, S., Zhou, N., Chen, P., Liu, Y., Wang, Y., Peng, P., Cheng, Y., Addy, M., et al. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.07.039 · Cited by 195
Abiotic and biotic degradation of oxo-biodegradable polyethylenes
Ojeda, T. F. M., Dalmolin, E., Forte, M. M. C., Jacques, R. J. S., Bento, F. M., & Camargo, F. A. O. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.03.011 · Cited by 189
Potential of fungi isolated from the dumping sites mangrove rhizosphere soil to degrade polythene
Sangale, M. K., Shahnawaz, M., & Ade, A. B. (2019) · Scientific Reports · doi:10.1038/s41598-019-41448-y · Cited by 187
Yang, N., Zhang, H., Chen, M., Shao, L.-M., & He, P.-J. (2012) · Waste Management · doi:10.1016/j.wasman.2012.06.008 · Cited by 182
Abrusci, C., Pablos, J. L., Corrales, T., López-Marín, J., Marín, I., & Catalina, F. (2011) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2010.10.012 · Cited by 176
Mastral, F. J., Esperanza, E., Berrueco, C., Juste, M., & Ceamanos, J. (2003) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/s0165-2370(02)00068-2 · Cited by 175
Use of rhizosphere microorganisms in the biodegradation of PLA and PET polymers in compost soil
Janczak, K., Hrynkiewicz, K., Znajewska, Z., & Dąbrowska, G. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2018.03.017 · Cited by 173
Kasar, P., Sharma, D. K., & Ahmaruzzaman, M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121639 · Cited by 172
Hernández, M. D. R., Gómez‐Siurana, A., García, A. N. J., Agulló, J., & Marcilla, A. F. (2006) · Applied Catalysis A General · doi:10.1016/j.apcata.2006.10.017 · Cited by 169
Al-Salem, S. M. (2019) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2019.05.008 · Cited by 169
Exploring hydroperoxides in combustion: History, recent advances and perspectives
Wang, Z., Herbinet, O., Hansen, N., & Battin-Leclerc, F. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.02.003 · Cited by 166
A review of experimental studies of the role of free-radicals in polyethylene oxidation
Bracco, P., Costa, L., Luda, M. P., & Billingham, N. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.07.011 · Cited by 165
Macromolecules : an introduction to polymer science
BOVEY, F. A., & Winslow, F. H. (1979) · Cited by 153
High photocatalytic degradation activity of polyethylene containing polyacrylamide grafted TiO2
Liang, W., Luo, Y. M., Song, S., Dong, X., & Yu, X. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.05.027 · Cited by 149
Noh, G. A., Shi, Z., Zones, S. I., & Enrique Iglesia, A. (2018) · Journal of Catalysis · doi:10.1016/j.jcat.2018.03.033 · Cited by 147
Experimental investigation on liquefaction of plastic waste to oil in supercritical water
Bai, B., Jin, H., Fan, C., Cao, C., Wei, W., & Cao, W. (2019) · Waste Management · doi:10.1016/j.wasman.2019.04.017 · Cited by 147
Zhao, X., Li, Z., Chen, Y., Shi, L., & Zhu, Y. (2007) · Applied Surface Science · doi:10.1016/j.apsusc.2007.07.154 · Cited by 142
Waste incineration and adverse birth and neonatal outcomes: a systematic review
Ashworth, D., Elliott, P., & Toledano, M. B. (2014) · Environment International · doi:10.1016/j.envint.2014.04.003 · Cited by 141
Resource recovery via catalytic fast pyrolysis of polystyrene using zeolites
Ojha, D. K., & Vinu, R. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.02.024 · Cited by 139
Biomass gasification: Influence of torrefaction on syngas production and tar formation
Dudyński, M., van Dyk, J. C., Kwiatkowski, K., & Sosnowska, M. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.11.018 · Cited by 136
Manos, G., Garforth, A. A., & Dwyer, J. (2000) · Industrial & Engineering Chemistry Research · doi:10.1021/ie990513i · Cited by 132
Tian, L., Kolvenbach, B. A., Corvini, N., Wang, S., Tavanaie, N., Wang, L., Ma, Y., Scheu, S., Corvini, P. F.-X., & Ji, R. (2016) · New Biotechnology · doi:10.1016/j.nbt.2016.07.008 · Cited by 131
Verma, R. K., Singh, S., Dalai, M. K., Saravanan, M., Agrawal, V. V., & Srivastava, A. K. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.07.042 · Cited by 122
Thomas, R. T., Nair, V., & Sandhyarani, N. (2013) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.017 · Cited by 118
Products from the high temperature pyrolysis of RDF at slow and rapid heating rates
Efika, E. C., Onwudili, J. A., & Williams, P. T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.01.004 · Cited by 118
Liu, Z., Wang, X., Wang, F., Bai, Z., Chadwick, D. R., Misselbrook, T. H., & Ma, L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122328 · Cited by 115
Novotný, Č., Malachová, K., Adamus, G., Kwiecień, M., Lotti, N., Soccio, M., Verney, V., & Fava, F. (2018) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2018.04.014 · Cited by 112
Li, C., Ding, Y., Yang, Z., Yuan, Z., & Ye, L. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106366 · Cited by 111
Comparative reactivity of glycols in PET glycolysis
Pardal, F., & Tersac, G. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2006.05.016 · Cited by 109
Newalkar, G., Iisa, K., D’Amico, A. D., Sievers, C., & Agrawal, P. K. (2014) · Energy & Fuels · doi:10.1021/ef5009715 · Cited by 109
Rajendran, K. M., Chintala, V., Sharma, A. K., Pal, S., Pandey, J. K., & Ghodke, P. K. (2020) · Materials Today Communications · doi:10.1016/j.mtcomm.2020.100982 · Cited by 104
Thanh, N. P., Matsui, Y., & Fujiwara, T. (2010) · Environmental Monitoring and Assessment · doi:10.1007/s10661-010-1490-8 · Cited by 102
Enhancement of biodegradation of plastic wastes via methane oxidation in semi-aerobic landfill
Muenmee, S., Chiemchaisri, W., & Chiemchaisri, C. (2016) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2016.03.016 · Cited by 101
Mechanistic interpretation of base-catalyzed depolymerization of polystyrene
Woo, O. S., Ayala, N., & Broadbelt, L. J. (2000) · Catalysis Today · doi:10.1016/s0920-5861(99)00235-7 · Cited by 97
Glycolysis of viscoelastic flexible polyurethane foam wastes
Simón, D., Borreguero, A. M., de Lucas, A., & Rodríguez, J. F. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.03.008 · Cited by 95
Li, Y., Li, J., Guo, S., & Li, H. (2003) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2003.10.011 · Cited by 91
Gaurh, P., & Pramanik, H. (2018) · Waste Management · doi:10.1016/j.wasman.2018.05.013 · Cited by 91
Biodegradation of oxo‐biodegradable polyethylene
Reddy, M. M., Deighton, M. A., Gupta, R. K., Bhattacharya, S. N., & Parthasarathy, R. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.29073 · Cited by 89
Thermal decomposition of individual and mixed plastics in the presence of CaO or Ca(OH)2
Kumagai, S., Hasegawa, I., Grause, G., Kameda, T., & Yoshioka, T. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.04.004 · Cited by 88
Gasification of plastic waste as waste-to-energy or waste-to-syngas recovery route
Brems, A., Dewil, R., Baeyens, J., & Zhang, R. (2013) · Natural Science · doi:10.4236/ns.2013.56086 · Cited by 87
Health effects of exposure to waste incinerator emissions:a review of epidemiological studies.
Franchini, M., Rial, M., Buiatti, E., & Bianchi, F. (2004) · PubMed · Cited by 86
Evolution of products during the degradation of polyethylene in a batch reactor
Marcilla, A. F., Beltrán, M., & Navarro, R. (2009) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2009.03.004 · Cited by 85
Production of hydrogen-rich gas from plant biomass by catalytic pyrolysis at low temperature
Qinglan, H., Wang, C., Lu, D., et al. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.06.039 · Cited by 80
Degradation kinetics of polystyrene and EPDM melts under ultrasonic irradiation
Li, J., Guo, S., & Li, X. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.12.017 · Cited by 77
The biodegradative effect of Tenebrio molitor Linnaeus larvae on vulcanized SBR and tire crumb
Aboelkheir, M. G., Visconte, L. Y., Oliveira, G. E., Filho, R. D. T., & de Souza, F. G. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.08.228 · Cited by 77
Does reducing air pollution improve the progress of sustainable development in China?
Zhao, Y., Tan, Y., & Feng, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.122759 · Cited by 77
Self-citationThermal and catalytic degradation of pyrolytic oil from pyrolysis of municipal plastic wastes
Lee, K.-H. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.11.032 · Cited by 75
Pyrolysis of the rejects of a waste packaging separation and classification plant
de Marco, I., Caballero, B. M., López-Urionabarrenechea, A., Laresgoiti, M. F., Torres, A., & Chomón, M. J. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.09.002 · Cited by 73
Biodegradation of low density polyethylene (LDPE) by fungi isolated from municipal landfill area.
Pramila, R., & Ramesh, K. V. (2017) · Journal of Microbiology and Biotechnology Research · Cited by 72
Thermal and catalytic pyrolysis of a synthetic mixture representative of packaging plastics residue
Colantonio, S., Cafiero, L., Angelis, D. D., Ippolito, N. M., Tuffi, R., & Ciprioti, S. V. (2019) · Frontiers of Chemical Science and Engineering · doi:10.1007/s11705-019-1875-3 · Cited by 72
Photodegradable plastics: end-of-life design principles
Daglen, B. C., & Tyler, D. R. (2010) · Green Chemistry Letters and Reviews · doi:10.1080/17518250903506723 · Cited by 69
Stelmachowski, M. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.02.035 · Cited by 68
Recent Advances in the Chemical Recycling of Polymers (PP, PS, LDPE, HDPE, PVC, PC, Nylon, PMMA)
Dimitris, S., Andriotis, L., Ioannis, A. N., Dimitra, A., Nikolaos, P., Siafaka, P. I., Tsagkalias, I. S., & Tsintzou, G. P. (2012) · InTech eBooks · doi:10.5772/33457 · Cited by 66
Kinetics of Polycarbonate Methanolysis by a Consecutive Reaction Model
Kim, D., Kim, B.-K., Cho, Y., Han, M., & Kim, B. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801893v · Cited by 64
Composite zeolite beta catalysts for catalytic hydrocracking of plastic waste to liquid fuels
Munir, D., Amer, H., Aslam, R., Bououdina, M., & Usman, M. R. (2020) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-020-00169-3 · Cited by 63
Mixtures of rubber tyre and plastic wastes pyrolysis: A kinetic study
Miranda, M., Cabrita, I., Pinto, F., & Gulyurtlu, I. (2013) · Energy · doi:10.1016/j.energy.2013.06.033 · Cited by 62
The biodegradation of polyester and polyester polyurethane coatings using Papiliotrema laurentii
Hung, C., Barlow, D. E., Varaljay, V. A., Drake, C. A., Crouch, A. L., Russell, J. N., Nadeau, L. J., Crookes‐Goodson, W. J., & Biffinger, J. C. (2019) · International Biodeterioration & Biodegradation · doi:10.1016/j.ibiod.2019.02.002 · Cited by 62
Fluidized-Bed Combustion Characteristics of Cedar Pellets by Using an Alternative Bed Material
Shimizu, T., Han, J., Choi, S.-Y., Kim, L., & Kim, H. (2006) · Energy & Fuels · doi:10.1021/ef0601723 · Cited by 57
Mechanochemical dechlorination of polyvinyl chloride by co-grinding with various metal oxides
Inoue, T., Miyazaki, M., Kamitani, M., Kano, J., & Saito, F. (2004) · Advanced Powder Technology · doi:10.1163/156855204773644445 · Cited by 57
Syntheses by Free-radical Reactions. V. A New Synthesis of Carboxylic Acids
Coffman, D. D., CRAMER, R. D. I., & Mochel, W. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01544a072 · Cited by 53
Minimal Conditions to Degrade Low Density Polyethylene by Aspergillus terreus and niger
Sáenz, M., Borodulina, T., Diaz, L., & Banchón, C. (2019) · Journal of Ecological Engineering · doi:10.12911/22998993/108699 · Cited by 49
Zapata, P. A., Rabagliati, F. M., Lieberwirth, I., Catalina, F., & Corrales, T. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.06.020 · Cited by 47
Singh, M. V. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.06.003 · Cited by 44
Influence of reaction pressure on co-pyrolysis of LDPE and a heavy petroleum fraction
Schubert, T., Lehner, M., Karner, T., Hofer, W., & Lechleitner, A. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.05.016 · Cited by 43
Lee, K.-H., Shin, D.-H., & Seo, Y. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.09.019 · Cited by 36
Xu, J., Yang, W., Zhang, C., Dong, X., & Luo, Y. M. (2017) · Polymer Composites · doi:10.1002/pc.24679 · Cited by 36
Zenteno, A., Lieberwirth, I., Catalina, F., Corrales, T., Guerrero, S., Vasco, D. A., & Zapata, P. A. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.12.007 · Cited by 33
Chalup, A. E., Ayup, M. M., Monmany-Garzia, A. C., Malizia, A., Martín, E. V. R., de Cristóbal, R., & Galindo‐Cardona, A. (2018) · Journal of Apicultural Research · doi:10.1080/00218839.2018.1484614 · Cited by 31
Roy, P. K., Surekha, P., Rajagopal, C., et al. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27889 · Cited by 29
Behaviour of biodegradable plastics in composting facilities
Körner, I., Redemann, K., & Stegmann, R. (2005) · Waste Management · doi:10.1016/j.wasman.2005.02.017 · Cited by 28
Role of the Catalyst in the Pyrolysis of Polyolefin Mixtures and Used Tires
Palza, H., Aravena, C., & Colet, M. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.6b02660 · Cited by 28
EXPERIMENTAL INVESTIGATION ON THE HEAT OF COMBUSTION FOR SOLID PLASTIC WASTE MIXTURES
Costiuc, L., Ţierean, M. H., Baltes, L. S., & Paţachia, S. F. (2015) · Environmental Engineering and Management Journal · doi:10.30638/eemj.2015.140 · Cited by 26
Qin, L., Han, J., Chen, W., Yao, X. X., Shimizu, T., & Kim, H. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.153 · Cited by 24
Transport Phenomena in Catalytic Hydrocracking of Polystyrene in Solution
Fuentes-Ordóñez, E. G., Salbidegoitia, J. A., González-Marcos, M. P., & González-Velasco, J. R. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401968r · Cited by 22
The combustion of polyolefins in inert and catalytic fluidised beds
Żukowski, W., & Berkowicz-Płatek, G. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.117663 · Cited by 21
Contaminated land clean-up using composted wastes and impacts of VOCs on land
Williamson, J. C., Akinola, M. O., Nason, M. A., Tandy, S., Healey, J. R., & Jones, D. L. (2009) · Waste Management · doi:10.1016/j.wasman.2008.11.015 · Cited by 19
New evidences of accelerating degradation of polyethylene by starch
Liu, X., Yu, L. F., Xie, F., Petinakis, E., Sangwan, P., Shen, S., Dean, K., Ammala, A., & Holmes, S. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39421 · Cited by 18
Zhu, F., Yan, F., Zhang, Z., & Wang, Y. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00998 · Cited by 18
Suppressing effect of goethite on PCDD/F and HCB emissions from plastic materials incineration
Jin, G., Lee, S., Kang, J., Chang, Y., & Chang, Y.-Y. (2007) · Chemosphere · doi:10.1016/j.chemosphere.2007.08.059 · Cited by 15
Cited by
The world of plastic waste: A review
Nayanathara Thathsarani Pilapitiya, P. G. C., & Ratnayake, A. S. (2024) · Cleaner Materials · doi:10.1016/j.clema.2024.100220 · Cited by 1,034
Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management
Kibria, M. G., Masuk, N. I., Safayet, R., Nguyen, H. Q., & Mourshed, M. (2023) · International Journal of Environmental Research · doi:10.1007/s41742-023-00507-z · Cited by 884
Liu, L., Xu, M., Ye, Y., & Zhang, B. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.151312 · Cited by 419
A Review on Properties and Application of Bio-Based Poly(Butylene Succinate)
Rafiqah, S. A., Khalina, A., Harmaen, A. S., Tawakkal, I. A., Zaman, K., Asim, M., Nurrazi, M. N., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13091436 · Cited by 398
Progress and perspective for conversion of plastic wastes into valuable chemicals
Zheng, K., Wu, Y., Hu, Z., Wang, S., Jiao, X., Zhu, J., Sun, Y., & Xie, Y. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00688j · Cited by 395
Metadata
- Authors
- Zhang, F., Zhao, Y., Wang, D., Yan, M., Zhang, J., Zhang, P., Ding, T., Chen, L., & Chen, C.
- Venue
- Journal of Cleaner Production
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 282
- Pages
- 124523
- ISSN
- 0959-6526 (ISSN-L)
- OpenAlex
- W3097379035
- Cited by
- 532
- References
- 186
- FWCI
- 12.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.