The DOI matches its Crossref record; 136 of the 136 references it cites were found in a registry or an index.
A review on laser cladding of high-entropy alloys, their recent trends and potential applications
Abstract
Abstract High-Entropy Alloys (HEAs) are a promising class of metallic materials that have allured the world of material science and engineering. These intriguing materials are proving their worth in the coatings for severe ambient and demanding conditions. Laser cladding (LC) is a non-linear complex, multidisciplinary and modern technology applied for surface modification. Nobler properties of HEAs as compared to traditional alloys permitted the research community to explore Laser-Cladded High-Entropy Alloy Coatings (LC-HEACs). Here, this article provides a review and recent trends of LC-HEACs, aiming to address the use of LC technology for HEA materials, the influence of process parameters on the geometric and metallurgical characteristics of the LC-HEACs. Common defects not limited to microcracks and residual stresses, and techniques to improve the quality of the LC-HEACs are elucidated. Furthermore, thermo-kinetics effect, thermomechanical behavior, microstructural evolution, and strengthening mechanisms are illustrated for a better understanding of laser-material interaction. The potential applications of the LC-HEACs are outlined considering wear, corrosion, erosion, and oxidation resistance and their corresponding substrates. The article also highlights the research gaps, current trends, and possible future directions in the context of critical challenges that need to be catered, before the actual implementation of LC-HEACs in industries. Owing to the variety of element constitution for HEAs design as well as excellent mechanical and functional properties, LC-HEACs will blossom in the years to come.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
High-Entropy Alloys: A Critical Review
Tsai, M.-H., & Yeh, J.-W. (2014) · Materials Research Letters · doi:10.1080/21663831.2014.912690 · Cited by 3,477
Idris, M. H., Jafari, H., Harandi, S. E., Mirshahi, M., & Koleyni, S. J. (2012) · Advanced materials research · Cited by 2,357
Wu, Z., Bei, H., Pharr, G. M., & George, E. P. (2014) · Acta Materialia · doi:10.1016/j.actamat.2014.08.026 · Cited by 2,134
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High entropy alloys: A focused review of mechanical properties and deformation mechanisms
George, E. P., Curtin, W. A., & Tasan, C. C. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.12.015 · Cited by 1,917
Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy
Senkov, O. N., Scott, J. M., Senkova, S. V., Miracle, D. B., & Woodward, C. F. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.02.171 · Cited by 1,856
Alloy Design Strategies and Future Trends in High-Entropy Alloys
Yeh, J.-W. (2013) · JOM · doi:10.1007/s11837-013-0761-6 · Cited by 1,786
Science and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,131
High-entropy alloys: a critical assessment of their founding principles and future prospects
Pickering, E. J., & Jones, N. G. (2016) · International Materials Reviews · doi:10.1080/09506608.2016.1180020 · Cited by 1,062
Corrosion mechanisms in theory and practice
(1996) · Choice Reviews Online · doi:10.5860/choice.34-0946 · Cited by 930
Recent research and development status of laser cladding: A review
Zhu, L., Xue, P., Lan, Q., Meng, G., Ren, Y., Yang, Z., Xu, P., & Liu, Z. (2021) · Optics & Laser Technology · doi:10.1016/j.optlastec.2021.106915 · Cited by 895
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Hong Ng, V. M., Huang, H., Zhou, K., Lee, P. S., Que, W., Xu, J. Z., & Kong, L. B. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta06772g · Cited by 784
Multicomponent and High Entropy Alloys
Cantor, B. (2014) · Entropy · doi:10.3390/e16094749 · Cited by 656
Corrosion behavior of FeCoNiCrCux high-entropy alloys in 3.5% sodium chloride solution
Hsu, Y.-J., Chiang, W.-C., & Wu, J.-K. (2005) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2005.01.001 · Cited by 655
Samal, P., Vundavilli, P. R., Meher, A., & Mahapatra, M. M. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.09.010 · Cited by 644
Lattice distortion in a strong and ductile refractory high-entropy alloy
Lee, C., Song, G., Gao, M. C., Feng, R., Chen, P., Brechtl, J., Chen, Y., An, K., Guo, W., Poplawsky, J. D., et al. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.053 · Cited by 622
Zhang, Y., Yeh, J., Sun, J., Lin, J. P., & Yao, K.-F. (2015) · Advances in Materials Science and Engineering · doi:10.1155/2015/781303 · Cited by 594
High-entropy alloys: emerging materials for advanced functional applications
Wang, X., Guo, W., & Fu, Y. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta09601f · Cited by 524
Superior hydrogen storage in high entropy alloys
Sahlberg, M., Karlsson, D., Zlotea, C., & Jansson, U. (2016) · Scientific Reports · doi:10.1038/srep36770 · Cited by 504
Mao, B., Siddaiah, A., Liao, Y., & Menezes, P. L. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.02.009 · Cited by 489
Homogenization of Al CoCrFeNi high-entropy alloys with improved corrosion resistance
Shi, Y., Collins, L., Feng, R., Zhang, C., Balke, N., Liaw, P. K., & Yang, B. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.01.030 · Cited by 476
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
Ye, Q., Feng, K., Li, Z., Lu, F., Li, R., Huang, J., & Wu, Y. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2016.11.176 · Cited by 408
A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy
Lu, Y., Huang, H., Gao, X., Ren, C., Gao, J., Zhang, H., Zheng, S., Jin, Q., Zhao, Y., Lu, C., et al. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.09.034 · Cited by 405
High entropy alloys as a bold step forward in alloy development
Miracle, D. B. (2019) · Nature Communications · doi:10.1038/s41467-019-09700-1 · Cited by 404
Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Singla, A. K., Banerjee, M., Sharma, A., Singh, J., Bansal, A., Gupta, M. K., Khanna, N., Shahi, A. S., & Goyal, D. K. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.01.009 · Cited by 383
Thermal Spray High-Entropy Alloy Coatings: A Review
Meghwal, A., Anupam, A., Murty, B. S., Berndt, C. C., Kottada, R. S., & Ang, A. S. M. (2020) · Journal of Thermal Spray Technology · doi:10.1007/s11666-020-01047-0 · Cited by 377
Physical Properties of High Entropy Alloys
Tsai, M.-H. (2013) · Entropy · doi:10.3390/e15125338 · Cited by 373
The role of additive manufacturing for biomedical applications: A critical review
Kumar, R., Kumar, M., & Chohan, J. S. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.022 · Cited by 367
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Jin, G. D., Cai, Z., Guan, Y., Cui, X., Liu, Z., Li, Y., Dong, M., & Zhang, D. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.03.135 · Cited by 346
High entropy oxides-exploring a paradigm of promising catalysts: A review
Albedwawi, S. H., AlJaberi, A., Haidemenopoulos, G. N., & Polychronopoulou, K. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109534 · Cited by 343
An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy
Owen, L. R., Pickering, E. J., Playford, H. Y., Stone, H. J., Tucker, M. G., & Jones, N. G. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.09.032 · Cited by 338
Wang, R., Zhang, K., Davies, C., & Wu, X. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.10.138 · Cited by 306
Tong, Z., Ren, X., Jiao, J., Zhou, W., Ren, Y., Ye, Y., Larson, E. A., & Gu, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.01.213 · Cited by 304
Dak, G., & Pandey, C. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.08.019 · Cited by 294
From high-entropy alloys to complex concentrated alloys
Gorsse, S., Couzinié, J.-P., & Miracle, D. B. (2018) · Comptes Rendus. Physique · doi:10.1016/j.crhy.2018.09.004 · Cited by 293
Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.009 · Cited by 286
A ductile high entropy alloy with attractive magnetic properties
Li, P., Wang, A., & Liu, C. T. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.186 · Cited by 277
Kunce, I., Polanski, M., & Bystrzycki, J. (2013) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.05.071 · Cited by 273
Choudhuri, D., Gwalani, B., Gorsse, S., Komarasamy, M., Mantri, S. A., Srinivasan, S. G., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.12.010 · Cited by 273
Kunce, I., Polanski, M., & Bystrzycki, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.02.067 · Cited by 272
High-entropy alloys fabricated via powder metallurgy. A critical review
Torralba, J. M., Alvaredo, P., & García-Junceda, A. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1584454 · Cited by 270
Liu, H., Liu, J., Chen, P., & Yang, H. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.05.006 · Cited by 270
Additive Manufacturing of High-Entropy Alloys: A Review
Chen, S., Tong, Y., & Liaw, P. K. (2018) · Entropy · doi:10.3390/e20120937 · Cited by 257
Deposition of FeCoNiCrMn high entropy alloy (HEA) coating via cold spraying
Yin, S., Li, W., Song, B., Yan, X., Kuang, M., Xu, Y., Wen, K., & Lupoi, R. (2019) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2018.12.015 · Cited by 255
Zhang, S., Wu, C. L., Zhang, C. H., Guan, M., & Tan, J. Z. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.04.011 · Cited by 252
Zhang, W., Li, Q., Tang, M., Zhang, H., Sun, X., Zou, S., Jensen, J. L., Liou, T. G., & Zhou, A. (2019) · Scientific Reports · doi:10.1038/s41598-019-54552-w · Cited by 240
Chen, M., Lan, L., Shi, X., Yang, H., Zhang, M., & Qiao, J. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.393 · Cited by 227
Jiang, Y. Q., Li, J., Juan, Y. F., Lu, Z. J., & Jia, W. L. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.10.091 · Cited by 218
Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi
Thurston, K. V. S., Gludovatz, B., Hohenwarter, A., Laplanche, G., George, E. P., & Ritchie, R. O. (2017) · Intermetallics · doi:10.1016/j.intermet.2017.05.009 · Cited by 215
Wu, C. L., Zhang, S., Zhang, C. H., Zhang, H., & Dong, S. Y. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.12.196 · Cited by 211
Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature
Cui, Y., Shen, J., Manladan, S. M., Geng, K., & Hu, S. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.145736 · Cited by 209
Kunce, I., Polański, M., Karczewski, K., Płociński, T., & Kurzydłowski, K. J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.05.144 · Cited by 206
Sharma, A. S., Yadav, S., Biswas, K., & Basu, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.003 · Cited by 205
Shiratori, H., Fujieda, T., Yamanaka, K., Koizumi, Y., Kuwabara, K., Kato, T., & Chiba, A. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.01.019 · Cited by 203
Xiao, J.-K., Tan, H., Wu, Y.-Q., Chen, J., & Zhang, C. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125430 · Cited by 193
Technology readiness levels: Shortcomings and improvement opportunities
Olechowski, A. L., Eppinger, S. D., Joglekar, N., & Tomaschek, K. (2020) · Systems Engineering · doi:10.1002/sys.21533 · Cited by 185
Critical Assessment 14: High entropy alloys and their development as structural materials
Miracle, D. B. (2015) · Materials Science and Technology · doi:10.1179/1743284714y.0000000749 · Cited by 182
Juan, Y. F., Li, J., Jiang, Y. Q., Jia, W. L., & Lu, Z. J. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.08.264 · Cited by 179
Alaneme, K. K., Bodunrin, M. O., & Oke, S. R. (2016) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2016.03.004 · Cited by 176
Guo, Y., Shang, X., & Liu, Q. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.035 · Cited by 167
Xiang, K., Chen, L.-Y., Chai, L., Guo, N., & Wang, H. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146214 · Cited by 167
Bio-corrosion behavior and in vitro biocompatibility of equimolar TiZrHfNbTa high-entropy alloy
Yang, W., Liu, Y., Pang, S., Liaw, P. K., & Zhang, T. (2020) · Intermetallics · doi:10.1016/j.intermet.2020.106845 · Cited by 167
Effect of Mo and aging temperature on corrosion behavior of (CoCrFeNi)100-Mo high-entropy alloys
Wang, W., Wang, J., Sun, Z., Li, J., Li, L., Song, X. L., Wen, X., Xie, L., & Yang, X. M. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.152139 · Cited by 166
Li, M., Gàzquez, J., Borisevich, A. Y., Mishra, R., & Flores, K. M. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.01.021 · Cited by 158
High Entropy Alloy Coatings and Technology
Sharma, A. (2021) · Coatings · doi:10.3390/coatings11040372 · Cited by 157
Zhang, W., Tang, R. Y., Yang, Z. B., Liu, C. H., Chang, H., Yang, J., Liao, J., Yang, Y., & Liu, N. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.04.037 · Cited by 151
Ghadami, F., Rouhaghdam, A. S., & Ghadami, S. (2020) · Vacuum · doi:10.1016/j.vacuum.2020.109980 · Cited by 150
Structure and properties of lightweight high entropy alloys: a brief review
Maulik, O., Kumar, D., Kumar, S., Dewangan, S. K., & Kumar, V. (2018) · Materials Research Express · doi:10.1088/2053-1591/aabbca · Cited by 139
New multiphase compositionally complex alloys driven by the high entropy alloy approach
Manzoni, A. M., & Glatzel, U. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.06.036 · Cited by 138
New structure in refractory high-entropy alloys
Lilensten, L., Couzinié, J., Perrière, L., Bourgon, J., Emery, N., & Guillot, I. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.06.064 · Cited by 136
Qiu, Z., Yao, C., Feng, K., Li, Z., & Chu, P. K.-H. (2018) · International Journal of Lightweight Materials and Manufacture · doi:10.1016/j.ijlmm.2018.02.001 · Cited by 136
Ni, C., Shi, Y., Liu, J., & Huang, G. (2018) · Optics & Laser Technology · doi:10.1016/j.optlastec.2018.01.058 · Cited by 133
Towards V-based high-entropy alloys for nuclear fusion applications
Barron, P. J., Carruthers, A. W., Fellowes, J., Jones, N. G., Dawson, H. I., & Pickering, E. J. (2019) · Scripta Materialia · doi:10.1016/j.scriptamat.2019.09.028 · Cited by 132
Direct metal fabrication in rapid prototyping: A review
Ahmed, N. (2019) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2019.05.001 · Cited by 129
Saremi, M., Afrasiabi, A., & Kobayashi, A. (2007) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.11.029 · Cited by 127
Design of High-Entropy Alloy: A Perspective from Nonideal Mixing
He, Q., Ding, Z., Ye, Y. F., & Yang, Y. G. (2017) · JOM · doi:10.1007/s11837-017-2452-1 · Cited by 127
Luo, S., Zhao, C., Su, Y., Liu, Q., & Wang, Z. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100925 · Cited by 123
Low activation high entropy alloys for next generation nuclear applications
Ayyagari, A. V., Salloom, R., Muskeri, S., & Mukherjee, S. (2018) · Materialia · doi:10.1016/j.mtla.2018.09.014 · Cited by 117
Atomic Structure Modeling of Multi-Principal-Element Alloys by the Principle of Maximum Entropy
Wang, S. (2013) · Entropy · doi:10.3390/e15125536 · Cited by 112
Singh, D., Singh, R., & Boparai, K. S. (2017) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2017.10.026 · Cited by 111
Xu, Q., Zhang, Y., Liu, S.-H., Li, C., & Li, C. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126093 · Cited by 109
Strengthening mechanism in two-phase FeCoCrNiMnAl high entropy alloy coating
Cui, Y., Shen, J., Manladan, S. M., Geng, K., & Hu, S. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147205 · Cited by 106
Mohanty, A., Sampreeth, J. K., Bembalge, O. B., Hascoët, J.-Y., Marya, S. K., Immanuel, R. J., & Panigrahi, S. K. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.125028 · Cited by 104
A high-entropy V 35 Ti 35 Fe 15 Cr 10 Zr 5 alloy with excellent high-temperature strength
Xian, X., Zhong, Z., Zhang, B., Song, K., Chen, C., Wang, S., Cheng, J., & Wu, Y. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.029 · Cited by 101
Evolution of local lattice distortion under irradiation in medium- and high-entropy alloys
Tong, Y., Velişa, G., Zhao, S., Guo, W. H., Yang, T., Jin, K., Lu, C., Bei, H., Ko, J. Y. P., Pagan, D. C., et al. (2018) · Materialia · doi:10.1016/j.mtla.2018.06.008 · Cited by 101
Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., & Banerjee, R. (2019) · Optics & Laser Technology · doi:10.1016/j.optlastec.2019.01.009 · Cited by 101
MoFeCrTiWAlNb refractory high-entropy alloy coating fabricated by rectangular-spot laser cladding
Guo, Y., & Liu, Q. (2018) · Intermetallics · doi:10.1016/j.intermet.2018.09.005 · Cited by 100
Microstructures and hydrogen storage properties of La Ni Fe V Mn alloys
Kunce, I., Polański, M., & Czujko, T. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.039 · Cited by 99
Wen, X., Cui, X., Jin, G. D., Liu, Y., Zhang, Y., & Fang, Y. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126728 · Cited by 95
Irradiation effects in high entropy alloys and 316H stainless steel at 300 °C
Chen, W., Liu, X., Chen, Y., Yeh, J., Tseng, K.-K., & Natesan, K. (2018) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2018.08.031 · Cited by 94
Conditional expression explains molecular evolution of social genes in a microbe
de Oliveira, J. L., Castillo-Morales, A., Stewart, B., Gruenheit, N., Engelmoer, J., Brown, S. B., de Brito, R. A., Hurst, L. D., Urrutia, A. O., Thompson, C. R. L., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-11237-2 · Cited by 91
Research Progress of Titanium-Based High Entropy Alloy: Methods, Properties, and Applications
Ma, N., Liu, S., Liu, W., Xie, L., Wei, D., Wang, L., Li, L., Zhao, B., & Wang, Y. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.603522 · Cited by 90
Nd:YAG laser cladding of Co–Cr–Mo alloy on γ-TiAl substrate
Barekat, M., Razavi, R. S., & Ghasemi, A. (2016) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.01.003 · Cited by 89
High Entropy Alloys Mined From Binary Phase Diagrams
Qi, J., Cheung, A. M., & Poon, S. J. (2019) · Scientific Reports · doi:10.1038/s41598-019-50015-4 · Cited by 88
Computational modeling of high-entropy alloys: Structures, thermodynamics and elasticity
Gao, M. C., Gao, P., Hawk, J. A., Ouyang, L., Alman, D. E., & Widom, M. (2017) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2017.366 · Cited by 87
Chang, S.-Y., Li, C.-E., Chiang, S., & Huang, Y.-C. (2011) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2011.11.082 · Cited by 85
Chang, F., Cai, B., Zhang, C., et al. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.12.072 · Cited by 84
Microstructure and properties of MgMoNbFeTi2Yx high entropy alloy coatings by laser cladding
Gu, Z., Mao, P., Gou, Y., Yan, C., & Xi, S. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126303 · Cited by 82
Froend, M., Riekehr, S., Kashaev, N., Klusemann, B., & Enz, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.06.033 · Cited by 79
MoFe1.5CrTiWAlNbx refractory high-entropy alloy coating fabricated by laser cladding
Wang, H., Liu, Q., Guo, Y., & Lan, H. (2019) · Intermetallics · doi:10.1016/j.intermet.2019.106613 · Cited by 78
Thermodynamics of vacancies and clusters in high-entropy alloys
Wang, Z., Liu, C. T., & Dou, P. (2017) · Physical Review Materials · doi:10.1103/physrevmaterials.1.043601 · Cited by 75
Oñate, Á., Salgado, A. S., & Berrio, M. E. (2020) · Intermetallics · doi:10.1016/j.intermet.2020.106850 · Cited by 75
Aguilar-Hurtado, J. Y., Vargas-Uscategui, A., Paredes‐Gil, K., Palma-Hillerns, R., Tobar, M. J., & Amado, J. M. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.146084 · Cited by 73
Thermal conductivity of Al–Cu–Mg–Si alloys: Experimental measurement and CALPHAD modeling
Zhang, C., Du, Y., Liu, S., Liu, Y., & Sundman, B. (2016) · Thermochimica Acta · doi:10.1016/j.tca.2016.04.019 · Cited by 72
Ghadami, F., Rouhaghdam, A. S., & Ghadami, S. (2021) · Scientific Reports · doi:10.1038/s41598-020-79323-w · Cited by 64
Khan, N. A., Akhavan, B., Zheng, Z., Liu, H., Zhou, C., Zhou, H., Chang, L., Wang, Y., Liu, Y., Sun, L., et al. (2021) · Applied Surface Science · doi:10.1016/j.apsusc.2021.149491 · Cited by 64
Superconductivity in hexagonal Nb-Mo-Ru-Rh-Pd high-entropy alloys
Liu, B., Wu, J., Cui, Y., Zhu, Q., Xiao, G., Wu, S., Cao, G., & Ren, Z. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.03.004 · Cited by 62
A study of lattice elasticity from low entropy metals to medium and high entropy alloys
Huang, E., Yu, D., Yeh, J. W., Lee, C., An, K., & Tu, S.-Y. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.011 · Cited by 59
Liu, H., Liu, J., Chen, P., Yang, H., Hao, J., & Tian, X. (2019) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-019-03949-9 · Cited by 59
Savinov, R., Wang, Y., & Shi, J. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.018 · Cited by 57
Wu, C. L., Zhang, S., Zhang, C. H., Chen, J., & Dong, S. (2017) · Optics & Laser Technology · doi:10.1016/j.optlastec.2017.03.023 · Cited by 56
Zhang, B., Duan, Y., Wen, X., Ma, G., Wang, T., Dong, X., Zhang, H., Jia, N., & Zeng, Y. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2019.03.152 · Cited by 56
Cold Gas Spraying of a High-Entropy CrFeNiMn Equiatomic Alloy
Lehtonen, J., Koivuluoto, H., Ge, Y., Juselius, A., & Hannula, S. (2020) · Coatings · doi:10.3390/coatings10010053 · Cited by 54
Xia, A., Togni, A., Hirn, S., Bolelli, G., Lusvarghi, L., & Franz, R. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125356 · Cited by 53
On ZnO nano particle reinforced PVDF composite materials for 3D printing of biomedical sensors
Kumar, R., Singh, R., Singh, M., & Kumar, P. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.10.027 · Cited by 50
Size effects on plasticity in high-entropy alloys
Basu, I., Ocelík, V., & Hosson, J. T. M. D. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.282 · Cited by 48
Microstructure and properties of laser clad high-entropy alloy coating on aluminium
Shi, Y., Ni, C., Liu, J., & Huang, G. (2018) · Materials Science and Technology · doi:10.1080/02670836.2018.1444921 · Cited by 47
Process optimization of high entropy alloys by laser additive manufacturing
Dada, M. O., Popoola, A. P. I., Mathe, N., Pityana, S. L., Adeosun, S. O., Aramide, F. O., & Lengopeng, T. (2020) · Engineering Reports · doi:10.1002/eng2.12252 · Cited by 43
Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S., et al. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.158563 · Cited by 43
Xin, S. W., Shen, X., Du, C., Zhao, J., Sun, B., Xue, H., Yang, T., Cai, X., & Shen, T. (2020) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.155995 · Cited by 42
Guo, Y., Liu, Q., & Shang, X. (2019) · Rare Metals · doi:10.1007/s12598-018-1194-8 · Cited by 41
Jiang, H. Z., Han, K., Li, D., & Cao, Z. (2018) · Crystals · doi:10.3390/cryst8110409 · Cited by 35
Microstructure stability and oxidation behaviour of (FeCoNiMo) 90 (Al/Cr) 10 high-entropy alloys
Chen, C., Liu, N., Zhang, J., Cao, J. X., Wang, L. J., & Xiang, H. F. (2019) · Materials Science and Technology · doi:10.1080/02670836.2019.1652785 · Cited by 35
History of High-Entropy Materials
Zhang, Y. (2019) · Springer eBooks · doi:10.1007/978-981-13-8526-1_1 · Cited by 34
Formation of VC-composite surface layer on high C–Cr bearing tool steel by laser surface cladding
El-Labban, H. F., Mahmoud, E. R. I., & Al-Wadai, H. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.08.004 · Cited by 32
Designing Rules of Laser-Clad High-Entropy Alloy Coatings with Simple Solid Solution Phases
Juan, Y., Zhang, J., Dai, Y., et al. (2020) · Acta Metallurgica Sinica (English Letters) · doi:10.1007/s40195-020-01040-0 · Cited by 31
Nair, R. B., Arora, H. S., Mandal, P., Das, S., & Grewal, H. S. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800163 · Cited by 30
Nanostructured AlNiCoFeCrTi high-entropy coating performed by cold spray
Hushchyk, D. V., Yurkova, A., Cherniavsky, V. V., Bilyk, I. I., & Nakonechnyi, S. (2020) · Applied Nanoscience · doi:10.1007/s13204-020-01364-4 · Cited by 29
Wang, P., Salandari-Rabori, A., Dong, Q., & Fallah, V. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.02.024 · Cited by 27
Effects of Ni P coating on mechanical properties of Al0.3CoCrFeNi high-entropy alloys
Song, X., Shi, X., Xia, Z. H., Yang, H., Wu, Y., Liaw, P. K., & Qiao, J. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.03.010 · Cited by 26
Sha, M., Jia, C., Qiao, J. W., Feng, W., Ai, X., Jing, Y.-A., Shen, M., & Li, S. (2019) · Metals · doi:10.3390/met9121243 · Cited by 25
Cited by
Natural fiber reinforced composites: Sustainable materials for emerging applications
Khalid, M. Y., Al Rashid, A., Arif, Z. U., Ahmed, W., Arshad, H., & Zaidi, A. A. (2021) · Results in Engineering · doi:10.1016/j.rineng.2021.100263 · Cited by 600
Self-citationArif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Self-citationKhalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Self-citationKhalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Self-citation
Metadata
- Authors
- Arif, Z. U., Khalid, M. Y., ur Rehman, E., Ullah, S., Atif, M., & Tariq, A.
- Venue
- Journal of Manufacturing Processes
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 68
- Pages
- 225-273
- ISSN
- 1526-6125 (ISSN-L)
- OpenAlex
- W3184787696
- Cited by
- 334
- References
- 136
- FWCI
- 18.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.